Professional Documents
Culture Documents
MONOBLOCK
DIRECTIONAL CONTROL VALVES
SD14
Features
Simple, compact designed, this valves is only one section for open centre and closed centre hydraulic systems.
H Fitted with a main pressure relief valve.
H Diameter 20 mm -- 0.79 in interchangeable spools.
H Available manual, pneumatic, electro--hydraulic and remote with flexible cable spool control kits.
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40C temperature.
120 l/min
250 bar
3600 psi
on outlet port T
25 bar
360 psi
3 cm3/min
0.18 in 3/min
Fluid
Fluid temperature
Viscosity
operating range
from 15 to 75 mm2/s
min
12
max
mm2/s
400
from 15 to 75 cSt
12 cSt
mm2/s
400 cSt
Ambient temperature
Additional information
This catalogue shows the product in the most usual configurations.
Please contact Customer Service Dpt. for more detailled information or
special request.
WARNING!
All specifications of this catalogue refers to the standard product at this
date. Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
DAC005E
SD14
Dimensional data
35
1.38
5.5
0.22
72.5
2.85
21.5
0.85
11
0.43
Position 1
36
1.42
13
0.51
59
2.32
48
1.89
240
9.45
90
3.54
118
4.65
11
0.43
27.5
1.08
125
4.92
80
3.15
71
2.8
67.5
2.66
16
Position 0
16
M10
Position 2
38
1.5
27
1.06
35
1.38
WALVOIL
P0000001
105111001
MADE IN ITALY
24.5
0.96
WALVOIL
P0000001
105111001
MADE IN ITALY
104.5
4.11
Production batch :
P00 = production year (2000)
00001 = progressive number
Valve code
Standard threads
BSP
UN--UNF
(ISO 228/1)
(ISO 11926--1)
G 3/4
NPTF 1/8--27
NPTF 1/8--27
PORT
Inlet P
A and B ports
Outlet T
PILOT PORTS
Pneumatic
DAC005E
SD14
Hydraulic circuit
Standard valve is supplied with positive overlap spool (1CP).
AB
175
2500
Ex.: SD14/1(YG3--175)/1CP8L
Right inlet
A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration).
BA
175
2500
Ex.: SD14/1(YG3--175)/ED--1CP8L
DAC005E
SD14
Performance data
Open centre
From inlet to outlet.
20
(bar)
15
Pressure drop
A
P
270
(psi)
T
B
180
10
90
0
0
50
100
Flow
150
(l/min)
A
P
270
(psi)
T
B
180
10
90
0
0
50
100
Flow
150
(l/min)
A
P
270
(psi)
T
B
180
10
90
0
0
50
100
Flow
150
(l/min)
SD14
Ordering codes
Description example:
SD14 / 1 (YG3-- 175) / 1CP 8 L *
1.
2.
3.
4.
5.
1.
TYPE
1
4.
8
Body kits *
CODE
5KC1603040
DESCRIPTION
1 section
6.
2.
9B--10B--11B
TYPE
CODE
DESCRIPTION
VMD10/1 direct pressure relief valve type Y
(YG2-- 125)
3XCAR110212 Range 80 to 160 bar / 1150 to 2300 psi
standard setting 125 bar / 1800 psi
(YG3-- 175)
3XCAR110213 Range 125 to 250 bar / 1800 to 3600 psi
standard setting 175 bar / 2500 psi
(YG4-- 220)
3XCAR110214 Range 200 to 315 bar / 2900 to 4600 psi
standard setting 220 bar / 3200 psi
VMP10/1 pilot operated pressure relief valve type X
(XG-- 125)
X006211120
Range 25 to 315 bar / 360 to 4600 psi
standard setting 125 bar / 1800 psi
Standard setting is referred to 10 l/min flow.
SV
3.
XTAP526340
11--15--16
1.
8PF
Spool options
TYPE
1CP
CODE
3CU1510140
1N
3CU1510100
3CU1525600
3CP
3CU1531140
4CP
3CU1535140
6
7
3CU1550100
3CU1555100
CIRCUIT DESCRIPTION
Double acting with positive overlap,
3 positions, A and B closed in neutral position
Double acting, 3 positions, A and B closed in
neutral position
Double acting, 3 positions, with A open to tank
in neutral position
Single acting on A, 3 positions, B plugged
requires G3/4 plug (see part I )
Single acting on B, 3 positions, A plugged
requires G3/4 plug (see part I )
Double acting, 3 positions, closed center
Double acting, 3 positions, closed center with
A and B to tank in neutral position
2.
K
8EI3
SV
DAC005E
SD14
Ordering codes
4.
II
5.
L
TYPE
8
9B
CODE
5V08110000
5V09110000
10B
5V09110000
11
11B
5V11110000
5V11210000
15
16
8PF
8EI3
5V15110000
5V16110000
5V08110705
5V08110350
5V08110351
5.
TYPE
L
SLP
TP
TQ
SLP
3.
6.
TP
CODE
5LEV110000
5COP110000
5TEL110005
5TEL110110
PSA
3XTAP732200
II
DESCRIPTION
Standard lever box
Without lever, with dust proof plate
CG cable connection
CD cable connection
TYPE
G3/4
DESCRIPTION
With spring return in neutral position
With detent in position 1 and spring return in
neutral position
With detent in position 2 and spring return in
neutral position
With detent in position 1, neutral and 2
With detent in position 1 and 2, spring return
in neutral position
With detent in position 1 and neutral
With detent in position 2 and neutral
Proportional pneumatic kit
12 VDC ON/OFF electro--hydraulic kit
24 VDC ON/OFF electro--hydraulic kit
TYPE
PSL
TQ
DESCRIPTION
G3/4 plug for side inlet and outlet (nr.2 plugs
required). Standard configuration; PSL
must be omitted
G3/4 plug for upper inlet and outlet (nr.2 plug
required)
Port plug *
CODE
3XTAP732200
DESCRIPTION
Plug for single acting spool
Optional handlevers
TYPE
AL01/M10x200
CODE
170012020
DESCRIPTION
Lenght L = 200mm / 7.87in
SD14
Spools options
0
1CP
P T
A port plugged
A B
P T
B port plugged
P T
A B
P T
A B
A B
P T
P T
V2
Operating features
46.5
1.83
51
2.01
123
4.84
8
1
11
V1
8PF
V2
15
Optional connector
code: 2X1001010
16
Connection ISO4400
169
6.65
L
76
2.99
9B
10B
Feeder kit
(see catalogue SDS150
at page 13)
167
6.57
1
1
11B
V
8EI3
ON/OFF electro--hydraulic kit
DAC005E
SD14
Special configurations
Directional valve with rotary control kit
5.5
0.22
75
2.97
125
4.92
118
4.65
233.5 max
9.19
45
1.77
72.5
2.85
Optional handlever
code: 3XGIU422620
6.5
0.26
Stroke
24.2
0.95
+7
+0.27
--7
- 0.27
41
1.61
Standard body
27
1.06
Angle excursion 90
187
7.36
AB
175
2500
DAC005E
SD14
Special configurations
Spool in regenerative 4th position
72.5
2.85
3
0.12
5.5
0.22
264.5
10.41
118
4.65
268
10.55
53
2.09
79
3.11
125
4.92
36
1.42
Position 1
15
Position 0
13
Position 2
20
Position 3
27
1.06
AB
104.5
4.11
175
2500
10
DAC005E
SD14
Installation and maintenance
The SD14 valve is assembled and tested as per the technical specification of this catalogue.
Before the final installation on your equipment, follow the below recommendations:
--
the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat
surface;
--
in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly
on the valve;
--
A
B
T
All ports
G 3/4
90 / 66.4
60 / 44.3
70 / 51.6
95 / 70
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
DAC005E
11
WALVOIL S.P.A.
42100 REGGIO EMILIA ITALY VIA ADIGE, 13/D
TEL. +39.0522.932411 FAX +39.0522.300984
E--MAIL: INFO@WALVOIL.COM HTTP: //WWW.WALVOIL.COM
SALES DEPARTMENT
TEL. +39.0522.932555 FAX +39.0522.932455
D1409808I
DAC005E