Professional Documents
Culture Documents
Installation Guide
0.0
syngo MR VB17
0.0
0.0
0.0
0.0
0.0
Manufacturers note :
0.0
Products that bear a CE mark fulfill the provisions of the Council Direc0.0
tive 93/42/EEC of 14 June 1993 regarding medical equipment.
The CE mark applies exclusively to medical equipment and products
that are released under the relevant EU guidelines mentioned above.0.0
The authors have taken care in the preparation of this book, but SIEMENS
0.0
makes no expressed or limited warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages in connection with or arising out of the use of the information or
programs contained herein. SIEMENS reserves the right, in its sole discretion
and without notice, to make substitutions and modifications in the products and
practices described in this document.
0.0
Microsoft, Windows NT, Window, Internet Explorer and MS-DOS are trademarks or registered trademarks of Microsoft Corporation. Clearcase and Atria
are registered trademarks of Atria Software, Inc. Rational and the Rational
Logo are trademarks or registered trademarks of Rational Software Corporation. All other products are trademarks or registered trademarks of their respective companies.
0.0
Siemens AG 2001-2006
All Rights Reserved.
0.0
This document contains proprietary and confidential information which is property of SIEMENS AG, Medical Solutions, Erlangen, Germany, and is furnished
for the sole purpose of the operation of a MAGNETOM product. No part of this
documentation is to be used for any other purpose, and is not to be reproduced,
copied, disclosed, transmitted, stored in a retrieval system or translated into
any human or computer language, in any form, by any means, in whole or in
part, without the prior and express consent of SIEMENS.
0.0
Except as may otherwise be explicitly agreed to in writing, SIEMENS makes no
representation that equipment, software programs and practices described
herein will not infringe on existing or future patent rights, copyrights, trademarks, trade secrets or other proprietary rights of third parties. The descriptions
contained herein do not imply the granting of licenses to make, use, sell, license
or otherwise transfer SIEMENS products described herein.
0.0
IDEA is a tool limited to investigational use only. Because magnetic resonance image quality is fundamentally dependent on the timing and parameters
of the acquisition sequence, the user must assure sufficient testing of clinical
utility for any and all new sequences developed for use on humans. In addition,
it is possible to inadvertently create and incorrectly label images with sequences developed using IDEA. All labeling of images from investigational
sequences must be verified by the user on phantoms before use on humans.
Examinations performed using sequences generated with this package should
be for investigational purposes only, and should not be used for diagnosis without corroborative examination using SIEMENS standard sequences.
0.0
0.0
0.0
0.0
0.0
0.0
syngo MR B17
Confidential Draft Feb 2009
Contents
Installation Guide
Installation Guide
A.1
General Information
General Requirements ................................................... A.13
A.2
Stand-alone Installation
Installation of MS-DEV ................................................... A.23
Microsoft CD .............................................................. A.24
Siemens MS-DEV CD ................................................ A.25
IDEA installation ............................................................. A.26
Additional packages ....................................................... A.27
A.3
ClearCase Installation
IDEA installation ............................................................. A.33
Additional packages ....................................................... A.34
Changing the baseline .................................................... A.35
0.0
IDEA Manual
Confidential Draft Feb 2009
A.1
0.0
syngo MR B17
Confidential Draft Feb 2009
A.11
General Information
Installation Guide
General Information
A.1
0.0
A.12
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
General Requirements
General Requirements
System
requirements
A.1
A.1
Pentium 1 GHz
1024 MB RAM
The minimum software requirements for running IDEA are:
A.1
A.1
A.1
Working with IDEA requires additional space; the amount depends on the
number of projects under development and the simulations being run. If a
number must be specified, 10 GB should be sufficient. These minimum system requirements should not be taken as a recommendation when considering buying a new workstation.
A.1
Network
driver
A.1
C++ compiler
A.1
A.1
syngo MR B17
Confidential Draft Feb 2009
A.13
General Information
Installation Guide
The MS-DEV should be installed before starting with the IDEA installation
itself. For installation guidelines, please refer to the next chapters.
A.1
A.1
0.0
A.14
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
General Requirements
A.1
Additional
software
A.1
Baseline
A.1
For every NUMARIS version, the matching IDEA version must be used. For
example, for NUMARIS VA12A, use IDEA for VA12A; IDEA VA12B will not
work. Never try to mix different versions!
A.1
Every NUMARIS package has a baseline label which identifies the build of
this package, e.g. N4_VB13A_LATEST_20060408. It specifies both the software version and the date (in a yyyymmdd format).
A.1
The baseline label of the IDEA package is printed on the distribution DVD. It
is also stored in the file DVD:\baseline_standalone.txt.
A.1
syngo MR B17
Confidential Draft Feb 2009
A.15
General Information
Installation Guide
The baseline label of the NUMARIS software on the scanner can be found out
by Help Info -> General
A.1
0.0
A.16
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
General Requirements
A.1
WAR NI NG
The baseline labels of IDEA and the NUMARIS installation
on the scanner must be identical! Different baselines must
never be mixed.
If you have different baselines on your scanner and your
stand-alone IDEA, never take an application from your PC
to your scanner or vice versa.
Installation
modes
A.1
Stand-alone Installation
IDEA can be installed on any standard PC or Laptop. This offers the possibility to develop applications without the need to sit in front of the
NUMARIS console. This installation does not require syngo or NUMARIS
and needs about 1.6 GB of disk space.
Details may be found on Page A.22.
Archive Installation
This mode is reserved for SIEMENS in-house developers who have
access to the Clearcase archive. This mode sets only up the registry but
does not install any files.
Details may be found on Page A.32.
If the installation should be aborted by the user, it can be restarted or repeated
at any time without any problems.
A.1
Update IDEA
A.1
If there already exists an old IDEA installation with another baseline on your
stand-alone PC, it does not have to be uninstalled prior to the new installation,
because the new multi_idea framework will take care of the different versions.
A.1
Unless the required version of the Microsoft Developer Studio or the Cygnus
tools is also subject to change, there is no need for the deinstallation and reinstallation of this software package.
A.1
After an IDEA update (i.e. a change of the baseline), it is necessary to recompile all your sequences.
A.1
0.0
syngo MR B17
Confidential Draft Feb 2009
A.17
General Information
UninstallIDEA
A.1
Installation Guide
This is the way to uninstall IDEA: If any IDEA applications have been written,
they should be saved in a directory outside of IDEA now. Your IDEA stuff is
not included in the save set created by the service backup! Start multi_idea
and enter the DELETE command.
A.1
This will remove the complete IDEA subtree including all user-created source
files.
A.1
If you want to install a new version of IDEA directly afterwards, take care to
update the environment variables prior to the installation, e.g. by calling the
System Properties Environment window or by logging out.
A.1
0.0
A.18
IDEA Manual
Confidential Draft Feb 2009
A.2
0.0
syngo MR B17
Confidential Draft Feb 2009
A.21
Stand-alone Installation
Installation Guide
Stand-alone Installation
A.2
0.0
A.22
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
Installation of MS-DEV
Installation of MS-DEV
A.2
A.2
Note: Administrator rights are required (both for the C++ compiler installation
and the IDEA installation itself).
A.2
A.2
There are three substantial deviations from the default Microsoft installation:
A.2
There are two different ways to install the Microsoft Developer Studio:
A.2
a) You can use the MS-DEV CD ROM directly purchased by the customer.
Then please follow the instructions in the next subsection "Microsoft CD"
(Page A.24).
A.2
b) You could also use the Siemens CD with a pre installed version. Please
note that this DVD must only be installed on one system according to the
licensing terms. If you have this CD, please go to the subsection "Siemens
CD" (Page A.25).
A.2
A.2
0.0
syngo MR B17
Confidential Draft Feb 2009
A.23
Stand-alone Installation
Installation Guide
Microsoft CD
A.2
A.2
NOT E
Do not accept the default target directory proposed by
Microsoft, but use C:\MSVStudio6\Common. Otherwise
the makefiles will not work properly.
A.24
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
Installation of MS-DEV
Siemens MS-DEV CD
This installation step will take about 5 min.
A.2
A.2
A.2
(5) When the following window pops up, click the "OK" button:
A.2
A.2
0.0
syngo MR B17
Confidential Draft Feb 2009
A.25
Stand-alone Installation
Installation Guide
IDEA installation
A.2
Prerequisites:
A.2
(1) Login under your usual login name (you must have administrator rights).
(2) Insert the IDEA DVD
(3) Start a DOS command window and change to the DVD drive.
(4) Type "ideainstall.bat" and follow the instructions in the window.
Note: If there is not enough disk space on drive C: IDEA can be installed
on any other drive (e.g., drive D:). You will be asked to specify the drive
letter during the installation dialog.
Note: IDEA requires a drive letter to be assigned to the IDEA root directory. The first unsigned drive letter is automatically selected from the
alphabet starting from Z.
(5) To check the results of the installation, go to Start IDEA multi_idea.
Select the drive letter of the desired baseline and type "sde", the SDE
shell should start.
0.0
A.26
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
Additional packages
Additional packages
A.2
0.0
syngo MR B17
Confidential Draft Feb 2009
A.27
Stand-alone Installation
Installation Guide
0.0
A.28
IDEA Manual
Confidential Draft Feb 2009
A.3
0.0
syngo MR B17
Confidential Draft Feb 2009
A.31
ClearCase Installation
Installation Guide
ClearCase Installation
A.3
This installation mode is only suitable for SIEMENS internal software developers who can access the N4 ClearCase archive.
A.3
A.3
Prerequisites:
A.3
0.0
A.32
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
IDEA installation
IDEA installation
A.3
A.3
0.0
syngo MR B17
Confidential Draft Feb 2009
A.33
ClearCase Installation
Additional packages
Installation Guide
A.3
It is recommended to install some more tools on your system. For legal reasons, they cannot be distributed on the IDEA CD, but they can be downloaded
from the web for free:
A.3
0.0
A.34
IDEA Manual
Confidential Draft Feb 2009
Installation Guide
A.3
A.3
(1) Change your ClearCase config spec, e.g. with the "cleartool edcs"
command.
(2) Run the initprod command to initialize your /prod VOB and to update
your virtual MAGNETOM configurations.
0.0
syngo MR B17
Confidential Draft Feb 2009
A.35
ClearCase Installation
Installation Guide
0.0
A.36
IDEA Manual
Confidential Draft Feb 2009