Professional Documents
Culture Documents
SERVICE MANUAL
URL
http://www.jrc.co.jp
01ETM
JRC
Printed in Japan
NOTICE
It is strictly prohibited to reproduce part or all of this manual without prior permission.
The contents of this manual are subject to change without notice.
7ZPNA4409
JCY-1900/1950
i
DOC No. 7ZPNA4409
JCY-1900/1950
Before Operation
Pictorial indication
Various pictorial indications are included in this manual and are shown on this equipment so that you can
operate them safely and correctly and prevent any danger to you and / or to other persons and any damage
to your property during operation. Such indications and their meanings are as follows.
Please understand the meanings of pictorial indication before you read this manual.
DANGER
WARNING
CAUTION
The
Detailed contents of the prohibited action (Disassembling Prohibited in the example on the left) is
shown in the mark.
The
mark indicates instruction.
Detailed contents of the instruction ("Disconnect the power plug" in the example on the left) is shown in
the mark.
Warning Label
There is a warning label on the front panel of equipment. Do not try to remove, break or modify the label.
ii
DOC No. 7ZPNA4409
JCY-1900/1950
iii
DOC No. 7ZPNA4409
JCY-1900/1950
Precautions
DANGER
The prohibited matter of a battery and a lithium battery.
To short-circuit the + pin and pin.
Using for non-specified applications.
disassembling, modifying, destroying.
Throwing into fire, heating.
Using expired battery.
There is a danger that cause leakage of fluid, generation of heat, fire, explosion, destruction, or
injury by heat.
WARNING
Do not attempt inspections or repairs on the internal part of the equipment by yourself. Inspections or repairs by anyone other than qualified maintainers may cause a fire or electric shock.
Please contact our head office, or a nearby branch or local office to request servicing.
Do not use any power supply voltage other than the specified one.
Such action may cause a fire, electric shock, or malfunction of this equipment.
Turn off power supply switch before connecting or disconnecting cables to any external equipment.
Not turning it off may cause a fire or an electric shock.
If the power supply cable damaged, please contact our head office, or a nearby branch or local
office to request servicing.
The use of damaged cables may cause a fire or an electric shock.
If water entered the equipment, make sure to turn off the main power, open the breaker, and
please contact our head office, or a nearby branch or local office to request servicing.
Using it as it is may cause a fire, electric shock, or malfunction.
iv
DOC No. 7ZPNA4409
JCY-1900/1950
WARNING
If equipment malfunctions, make sure to turn off the main power, open the breaker, and please
contact our head office, or a nearby branch or local office to request servicing.
The continuous use of the equipment may cause a fire or electric shock.
The underwater acoustic beacon of fixed protective capsule unit and float free capsule unit has a
built-in lithium battery.
Do not discard because used lithium batteries are recycled. Please contact our head office, or a
nearby branch or local office to request servicing.
If disposing of this equipment, be sure to abide by applicable local laws and regulations.
v
DOC No. 7ZPNA4409
JCY-1900/1950
WARNING
The Recording Control Unit (NDV-1900/1950) has a UTILITY OUTLET.
When you connect the power plug to the power outlet, insert it firmly.
Failure to do so may cause fire, burns or electric shock.
Do not inset or drop any foreign objects such as metallic pieces into an air vent or opening.
Otherwise, it may cause a fire, electric shock or malfunction.
Do not place heavy objects on the power cable or do not bend the power cable by force.
Otherwise, the power cable is damaged, and it may cause a fire, electric shock.
Do not put the container with the liquid on or near this equipment.
Otherwise, if the liquid spill or come in this equipment, it may cause a fire, electric shock, or malfunction.
If anything abnormal such as smoke, strange smell or unusual heat is emitted, turn off the
POWER switch of the equipment immediately and pull out the power cable. Then, please contact
our head office, or a nearby branch or local office to request servicing. The continued use of the
equipment may cause a fire or electric shock.
vi
DOC No. 7ZPNA4409
JCY-1900/1950
CAUTION
This equipment has warning labels.
Do not try to remove, break or modify the label.
Do not install the equipment on the location where infringed by water, humidity, steam, dust, or
soot.
Otherwise, it may cause a fire, electric shock, or malfunction.
Do not touch this equipment, if hands or gloves are wet with water.
Otherwise, it may cause an electric shock, or a malfunction.
Although the shape of UTILITY OUTLET is for 100VAC, it directly outputs the voltage (100 to
220VAC) that is being input to the RCU. Do not connect a equipment for 100VAC, if 220VAC is
being input. Otherwise, a malfunction may occur.
Do not use any organic solvents such as thinner or benzine to clean the surface. These agents
can damage the surface coating.
Be sure to remove dirt and dust from the surface and wipe it using a clean dry cloth.
Do not carry out the tap of the screen by the sharp object.
Otherwise, the screen may be damaged.
vii
DOC No. 7ZPNA4409
JCY-1900/1950
CAUTION
Do not block up the air vent of this equipment.
Otherwise, the inside of equipment is filled with heat, and it may cause fire or malfunction.
Do not install the equipment on the unstable place such as on the shaky stand or inclined surface.
Otherwise, it may drop or fall down, resulting in an injury or malfunction.
viii
DOC No. 7ZPNA4409
JCY-1900/1950
Precautions (FFC)
WARNING
If the false distress alert is transmitted, take the following instructions immediately.
(1) Stop the transmission immediately.
(2) Report the following information to the Maritime Safety Agency.
(a) Ships Name, Type and Flag
(b) Capsule ID number (15 character UIN):
(c) Position and Time at the false transmission
(d) Cause of the false transmission
(e) Type, Serial Number and Delivery Date of the capsule
The capsule EPIRB function must not be used for other than distress.
Otherwise, a large trouble will be given to the search rescue organization.
Do not set the switch to "ON" except the case of manual activation in distress.
Distress signals are transmitted when turning the switch "ON".
The capsule unit must not be taken out from bracket other than distress.
Otherwise, a large trouble will be given to the search rescue organization.
The selector switch must be set to the READY position while voyaging.
The hydrostatic release unit (HRU) activates the cutter using spring force. Do not disassemble the
HRU, nor apply pressure to it. Serious injury could result.
ix
DOC No. 7ZPNA4409
JCY-1900/1950
WARNING
Once the hydrostatic release unit (HRU) operates, it cannot be reused. Be careful for capsule so
as not to be stolen or not to be activated by mischief when the ship is in port.
Confirm that the ship's name and ID correspond to those indicated on the label of the capsule
unit.
Rescue work will be planned and executed based on the information of ship's name and ID
transmitted from the capsule unit. Proper planning of rescue work would not be possible if ship's
name and ID are wrong. If the ship's name and ID indicated on the label of the capsule unit is
wrong, ask the purchasing dealer, JRC agent or the JRC branches to change it with correct ship's
name and ID.
If right ID cannot be set in the capsule, do not install the capsule. Otherwise, a large trouble will be
given to the search rescue organization.
Do not install the capsule in an extremely vibrating place such as a handrail. The capsule may be
damaged due to vibration.
Do not install the capsule in a strong magnetic field. The capsule may activate by the magnetic
force.
The capsule must be installed apart from the compass and so for the 0.8 meters or more so that
the magnetism is not influenced.
The battery and hydrostatic release unit (HRU) which expired effective periods expired must not
absolutely be used.
If such battery and HRU are used, the distress signal may not be emitted at the distress. Take
care that their lives do not expire.
x
DOC No. 7ZPNA4409
JCY-1900/1950
WARNING
Do not install with the capsule battery removed. The distress signal may not be emitted at the
distress.
When disposing of the capsule, contact the purchasing dealer, JRC agent or JRC branches to
request servicing.
If the capsule is transmitted the distress signal by improper disposal, large confusion is caused in
search and rescue operations.
Do not make the used battery to short-circuit, discharging electricity compulsorily or using for
other usages. Send used batteries to the purchasing dealer, JRC agent or JRC branches.
Do not discard used batteries. Send used batteries to the purchasing dealer, JRC agent or JRC
branches, to avoid causing environmental problem by throwing them away.
When sell the ship, contact to the purchasing dealer, JRC agent or JRC branches, and request to
register the radio station license and reset up the ship's name and ID.
If registration and reset up are not executed, false transmission or wrong ID code signal might be
transmitted in distress, and it causes serious confusion for search and rescue operation.
xi
DOC No. 7ZPNA4409
JCY-1900/1950
CAUTION
Open slowly the top cover.
If you open faster, the capsule may deviate from bracket and fall down.
In EPIRB function test, permitted distress signal for the test purpose is transmitted. Do not execute the test repeatedly in a short time.
Execute the test in 00 - 05 minutes of each o'clock for the reduction of processing capacity in the
satellite.
Request purchasing dealer, JRC agent or JRC branches to replace any stained, illegible, or
damaged label.
If the abnormal status is recognized in the capsule. request the service to purchasing dealer, JRC
agent or JRC branches,
If you want to replace or repair the capsule, contact the purchasing dealer, JRC agent or JRC
branches.
Do not use a solvent (paint-thinner, alcohol etc.) or alkaline/neutral detergent to clean up the
capsule.
It causes crack on the resin if such a detergent is used, and the capsule may not operate properly
in the worst case by leaking etc.
xii
DOC No. 7ZPNA4409
JCY-1900/1950
Contents
2.
MAINTENANCE ............................................................................................................................. 26
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
2.8.
2.9.
3.
4.
5.
6.
TROUBLE SHOOTING.................................................................................................................. 66
DIAGNOSIS OF THE CONNECTION EQUIPMENT BY REMOTE MAINTENANCE ................... 74
SCHEMATIC DIAGRAMS (CIRCUIT DIAGRAMS) ....................................................................... 75
6.1.
6.2.
6.3.
6.4.
6.5.
6.6.
7.
SPECIFICATIONS ......................................................................................................................... 81
7.1.
7.2.
7.3.
7.4.
7.5.
7.6.
7.7.
7.8.
7.9.
7.10.
7.11.
JCY-1900/1950
7.12.
8.
9.
xiv
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
1.
OUTLINE
Reduction of serial wiring cables is possible by sharing data (LAN: IEC61162-450) with new RADAR/ECDIS.
(For introduction, confirmation for supervisory authorities and ship's classification is required.)
Reduction of RGB wiring cable (5 coaxial cables) is possible by connecting to new RADAR/ECDIS
through LAN (IEC61162-450).
3) Capsule I/F
No separate power cable is required since power is supplied to the capsule unit with the LAN cable.
In VDR (JCY-1900), install both the protective and the float-free. In S-VDR (JCY-1950), install one of
capsules.
When retrieving the capsule units from the sea, with this 48-hour data recording function, the situation in
the event of an accident can be analyzed by comparing it to that before the accident.
Addition of the float-free capsule unit makes the retrieval of recording data easier.
5) Data recording in the internal storage (meet the demands of new standard)
The internal storage stores the data recorded for the past 720 hours.
With this 720-hour recording internal storage, the residual ratio of accident data rises substantially.
For voyage within 720 hours, all the data during the voyage can be recorded.
The 6-track microphone audio function enables recording of conversations in the bridge at 4 places in
addition to the dedicated audio recording in the wing.
Sound quality is improved (newly designed microphones and re-examined A/D conversion and compression performance).
The 2-track VHF audio function enables separate recording of No. 1 VHF and No. 2 VHF.
The 3-screen capacity for image recording enables recording of 3 screens in total (6 channels at maximum) for X band RADAR, S band RADAR and ECDIS.
Checking the latest recorded data is available through the Operation Panel Unit..
1
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Standards:
The 3 screens (X band RADAR, S band RADAR and ECDIS) are recorded every 15 seconds.
* When Rader is standby, the screen is recorded every 20 minutes. (The requirement by the standard
is recording every 10 to 30 minutes.)
Screen-1
Screen-2
Screen-3
Screen-1
Screen-2
Screen-3
2
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Component Name
Recording Control
Unit (RCU)
Main Control
Board
(MCB)
Audio Recording
Board (ARB)
Power Supply
Unit
(PSU)
Terminal Board
(TB)
Battery
Playback software for users
Playback software for the accident investigators
LAN Cable
Type Name
NDV-1900
Qty
1
CDJ-2510
CHA-1900
CBM-221
Function
- Output the recorded data to the fixed protective capsule unit, the float-free capsule
unit.
- Recording data to the internal storage.
- Collecting the radar images, the audio data,
and the sensor data.
- Managing and monitoring the VDR system.
- If AC input power is lost, it can record data
for 2 hours by the built-in battery.
CQD-2281
CBN-80
CYC-826
CYC-825
---
NCG-1900
Fixed Protective
Capsule Unit (FPC)
Beacon unit
Float Free Capsule
Unit (FFC)
Beacon Battery
Recording module
HRU
Junction Box
Microphone unit
NDH-338
7ZZNA4138
NDH-339
1
4
5
6
(TBD)
(TBD)
(TBD)
NQE-7700A
NVT-181
Accessories
7
H-7ZXNA4015
3
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Component Name
Type Name
Function
1
2
Microphone unit
Waterproof microphone unit
NVT-181
NVT-182
Excluding the 4 units of standard configuration, the microphone can install 8 units of
option units.
NCT-82 (32CH)
or
NCT-83 (64CH)
NCT-84
NWP-69
Accessories
6
H-7ZXNA4017
H-7ZXNA4016
H-7ZXNA4018
4
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
No.
1
Type Name
NDV-1950
Qty
1
Function
- Output the recorded data to the fixed protective capsule unit, the float-free capsule
unit.
- Recording data to the internal storage.
- Collecting the radar images, the audio data,
and the sensor data.
- Managing and monitoring the VDR system.
- If AC input power is lost, it can record data
for 2 hours by the built-in battery.
CBN-80
CYC-826
CYC-825
---
CDJ-2510
CHA-1900
CBM-221
CQD-2281
NCG-1950
Fixed Protective
Capsule Unit (FPC)
Beacon unit
Microphone unit
NDH-338
H-7ZZNA4138
NVT-181
Accessories
5
H-7ZXNA4015
5
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
No.
1
Type Name
NDV-1950
Qty
1
Function
- Output the recorded data to the fixed protective capsule unit, the float-free capsule
unit.
- Recording data to the internal storage.
- Collecting the radar images, the audio data,
and the sensor data.
- Managing and monitoring the VDR system.
- If AC input power is lost, it can record data
for 2 hours by the built-in battery.
CBN-80
CYC-826
CYC-825
---
CDJ-2510
CHA-1900
CBM-221
CQD-2281
NCG-1950
NDH-339
4
5
(TBD)
(TBD)
(TBD)
NQE-7700A
NVT-181
1
4
Accessories
6
H-7ZXNA4015
6
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Component Name
Type Name
Function
1
2
Microphone unit
Waterproof microphone unit
NVT-181
NVT-182
Excluding the 4 units of standard configuration, the microphone can install 8 units of
option units.
NCT-82 (32CH)
or
NCT-83 (64CH)
NCT-84
NWP-69
Accessories
6
H-7ZXNA4017
H-7ZXNA4016
H-7ZXNA4018
7
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
1) Standard specifications
Item
Capsule
Sensor recording
Audio recording
Image recording
Stopping/restarting
recording
Performance test
Microphone test
Alert output
JCY-1900/1950
Fixed Protective Capsule Unit
48 hours recording
Float-free Capsule Unit
48 hours recording
Internal storage for long term recording
720 hours (30 days) recording
(Unremovable)
LAN: 1 port (IEC61162-450, RMS)
Number of connectable units: 24ch
Serial: 24ch
IEC61162-2: 2ch (4800~38400bps)
IEC61162-1: 22ch (4800bps)
Bridge audio (microphone)
6 tracks x 2ch/track = 12ch
(standard)
VHF audio
2 tracks x 2ch/track = 4ch
Input signal: LAN(IEC61162-450)
Number of available inputs: 6
screens
Number of screens for recording:
3 screens (standard)
6 screens are selectable for recording.
8
DOC No. 7ZPNA4409
JCY-1800/1850
Protective Capsule Unit
12 hours recording
None
CF card
12 hours (half day) recording
None
1. OUTLINE
JCY-1900/1950
Item
Taking recorded data
Playback
JCY-1900/1950
Download software is attached.
Can select the recorded data to be
downloaded from the internal
storage by specifying the time
span.
Recorded data of 12 hours worth
can be taken within 2.5 hours.
Playback software is attached.
JCY-1800/1850
Same as JCY-1900
Same as JCY-1900
* The under lined parts in JCY-1900 column meet the demands of the new specifications.
2) Option specifications
Item
RGB input of the
image recording
signal
Gyro input
JCY-1900/1950
Input is possible with the optional
Frame Grabber Unit (FGU).
Number of RGB inputs: 2ch
Connectable maximum number of
FGU: 3 units
* 2ch/unit x 3 units
Input is possible with the optional
Digital Signal Convertor (DSC).
Number of input dry contacts:
NCT-82: 32ch
NCT-83: 64ch
Input is possible with the optional
A/D Convert Board (ADC).
Number of channels: 8ch
* Can mount on Digital Signal Convertor (DSC).
Expandable with the Data Acquisition Unit (DAU).
IEC61162-2: 2ch
IEC61162-1: 8ch
Input is possible with the Gyro I/F
Board (GIF).
JCY-1800/1850
Standard
Same as JCY-1900
Number of input dry contacts:
NCT-63: 16ch
NCT-72: 64ch
Same as JCY-1900
None
9
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
10
DOC No. 7ZPNA4409
[J702]
LAN
LAN
[ch2]
[ch3]
* TTYCS-4
AIS
[ch4]
[ch5]
[ch6]
[ch7]
[ch8]
[TB404]
VDR-LAN
[TB405]
DATA
[J517]
Mic 1-2
Mic 3-4
Mic Group1 Mic Group2
[TB406]
A/D Option
CEF-60
[ch1-8]
[TB1]
[J513]
[J514]
[J515]
JRC-LAN
Bridge Audio
[J516]
[TB402]
out
Dry Contact
VHF Audio
[TB913]
[TB915]
[TB914]
[TB916]
*1t x 25
[TB101]
AC IN
EXT-LAN
[J512]
(Owner Supply)
Real Time
Monitor PC
AC Distributor
[TB901]
[TB903]
[TB905]
[TB907]
[TB909]
[TB911]
[TB904]
[TB906]
[TB908]
[TB910]
[TB912]
[TB902]
VHF 3-4
Group2
VHF 1-2
Group1
VHF Radiotelephone
JCY-1900/1950
*0.5t x 25
Dry contact in
[ch1-32]
[TB101]
Mic 7-8
Mic Group4
Waterproof Microphones
NVT-182
Microphones
NVT-181
[J511-2]
[ch10]
[ch12]
[ch14]
[ch16]
[ch18]
[ch20]
[ch22]
[ch24]
[ch9]
[ch11]
[ch13]
[ch15]
[ch17]
[ch19]
[ch21]
[ch23]
[TB403]
[J511-1]
* TTYCS-1
BNWAS
[ch1]
* TTYCS-1
DGPS
* TTYCS-1
[TB401]
[J511-4]
CAPSULE
[J511-3]
CAPSULE
Junction
Box
NQE-7700A
* TTYCS-1
Electronical Logbook (if installed)
* TTYCS-1
Speed Log
* TTYCS-1
Gyro Compass
* TTYCS-1
Auto-pilot
* TTYCS-1
* TTYCS-1
Engine Telegraph
* TTYCS-1
* TTYCS-1
*TTYCS-4
Operation Panel
Unit
NCG-1900
* MPYC-xx
Dry Contact
(Yard)
* TTYCS-1
Echo Sounder
*Ethernet cable
Float-free
Capsule
NDH-339
* TTYCS-x
Analog
(Yard)
* TTYCS-1
Anemometer
Mic-1
*TTYCS-1Q
Mic-2
*TTYCS-1Q
Mic-3
*TTYCS-1Q
Mic-4
*TTYCS-1Q
Mic-7
*TTYCYS-1Q
Mic-8
*TTYCYS-1Q
* TTYCS-1
* TTYCS-1
Protective
Capsule
NDH-338
From AC Distributor
*Ethernet cable
[To JRC-Network]
ECDIS and RADAR for image acquisition
*Ethernet cable
*DPYCS-2.5
Wheelhouse
1. OUTLINE
11
* TTYCS-1
BNWAS
* TTYCS-1
* TTYCS-1
* TTYCS-1
Engine Telegraph
* TTYCS-1
Echo Sounder
* TTYCS-1
* TTYCS-1
Auto-pilot
* TTYCS-1
Gyro Compass
* TTYCS-1
Speed Log
* TTYCS-1
DGPS
* TTYCS-4
AIS
12
Electronic Inclinometer (if installed)
* TTYCS-1
* TTYCS-1
Anemometer
* TTYCS-1
* TTYCS-1
* TTYCS-1
ECDIS
*Ethernet cable
*TTYCS-4
* TTYCS-x
Analog
(Yard)
* MPYC-xx
Dry Contact
(Yard)
From AC Distributor
*TTYCS-1Q
*TTYCS-1Q
X-Band Radar
*TTYCS-1Q
S-Band Radar
*TTYCS-1Q
Mic-1
Mic-2
Mic-3
Mic-4
From AC Distributor
*Ethernet cable
Main ECDIS
*TTYCYS-1Q
*TTYCYS-1Q
Backup ECDIS
Mic-8
Mic-7
From AC Distributor
* TTYCS-1
* TTYCS-1
*DPYCS-2.5
*Ethernet cable
Connecting RADAR/ECDIS and optional Frame Grabber Unit (NWP-69) via RGB signal
JCY-1900/1950
1. OUTLINE
1. OUTLINE
JCY-1900/1950
*Ethernet cable
NCG-1950
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-4
NDV-1950
2) Use NDH-339
NDV-1900
*Ethernet cable
NCG-1950
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-1
TYCS-4
NDV-1950
13
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
14
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
System Configuration
Unit
Recording Control
Unit
(RCU)
Type Name
NDV-1900/1950
NCG-1900/1950
NDH-338
Circuitry
Main Control Board
(MCB)
Audio Recording
Board (ARB)
Power Supply Unit
(PSU)
Terminal Board (TB)
Long-term medium
Model number
CDJ-2510
Battery (BAT)
CBN-80
Operation Panel
Board (OPB)
CDC-1900
Remarks
CHA-1900
CBM-221
CQD-2281
CDD-756
Installed in the
MCB
Built-in CHG-232
(Thermo sensor
board)
NDH-338
NDH-339
NDH-339
NQE-7700A
NQE-7700A
Microphone Unit
(MIC)
Waterproof Microphone Unit (MIC)
Frame Grabber Unit
(FGU)
NVT-181
NVT-181
For connecting
NDH-339
Indoor
NVT-182
NVT-182
Option
NWP-69
CKA-137A
Option
NCT-82
CBJ-166
CQD-2284
Option
NCT-83
CBJ-166
CQD-2285
Option
NCT-84
Frame Grabber
Board (FGB)
Filter Board
Dry Contact Signal
Input Board (DSB)
Filter Board
Dry Contact Signal
Input Board (DSB)
Filter Board
Serial LAN Converter
Board (SLC)
Analog Option Board
(AOC)
Gyro I/F Board (GIF)
Filter Board
CBJ-166
CMH-2370
Option
CMJ-560
CMJ-554
CBJ-166
15
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Battery
16
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Speaker
Rotary Knob
HOME Button
USB Port
17
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
18
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
UNIT : mm
19
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
UNIT : mm
20
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Plug hole
Coated grommet
21
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
D-sub Connector
LAN Connector
Ground Terminal
Power Switch
Power Terminal
Block
Fuse
Fan
Filter Board
22
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
UNIT : mm
23
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
24
DOC No. 7ZPNA4409
1. OUTLINE
JCY-1900/1950
Filter Board
25
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
2.
MAINTENANCE
Name of Component
RCUNDV-1900/1950
Parts name
(Type Name)
Replacement Parts
Kit (7ZZNA4134)
Refer to 2.5.3.
Battery
(CBN80)
Refer to 2.5.1.
FPCNDH-338
Beacon
(7ZZNA4138
FFCNDH-339
Battery
(TBD)
OPUNCG-1900/1950
FGUNWP-69
Replacement method
FAN 2 pieces
(7BFNA4002)
Expiration date
HRU (Hydrostatic
Release Unit
(TBD)
LCD
Fan
(7BFNA4001)
Refer to 2.4.1.
*1
*1
Refer to 2.7.1.
*1 It is necessary to receive the capsule manufacturers (JOTRON) training for Replacement of FFC.
26
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
Unit (Model)
RCU
NDV-1900/1950
Remark
OPU
No parts
With harness
1 piece. Need two pieces in the
system.
Set exchange.
(NCG-1900/NCG-1950)
3
DSC 32ch
(NCT-82)
DSC 64ch
(NCT-83)
DAU
(NCT-84)
FGU
(NWP-69)
27
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
Name of Component
Spare Parts for RCU
(NDV-1900/1950)
Type Name
H-7ZXNA4015
Parts
fuseFIH 250
5A(TP.CR)URCSQD-H00(5ZFWU00005)
fuseMF60NR 250V 10 (5ZFGD00017)
fuse1203 (5ZFCK00016)
Fan7BFNA4002
Name of Component
Type Name
H-7ZXNA4016
H-7ZXNA4017
H-7ZXNA4018
28
DOC No. 7ZPNA4409
Parts
fuseMF51NR 250V 3.15 (5ZFGD00201)
Fan7BFNA4001
fuseMF51NR 250V 3.15(5ZFGD00201)
fuseMF51NR 250V 3.15 (5ZFGD00201)
fuseMF51NR 250V 0.5 (5ZFGD00019)
fuse1203 (5ZFCK00016)
fuse1215 (5ZFCK00017)
2. MAINTENANCE
JCY-1900/1950
1)
29
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
1)
2)
Bracket.
Terminal
2)
2)
3)
30
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
Terminal of PSU
31
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
2)
3)
1)
32
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
2
1) J508
2)
2) cable
clamp
J507
33
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
34
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
* The Fan cable is fixed by a cable clamp to keep from hitting the Fan.
Connect the cable Z101(rear side) to J507 after letting the cable pass twice to the clamp. (make a ring.)
Connect the cable Z102(front side) to J508 after letting the cable pass once to the clamp.
Z102
Z101
J508
J507
35
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
1)
2)
1)
2)
36
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
Crease
Line 1
W105 routing
W104 routing
37
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
SSD#1 SSD#2
1)
2)
3)
38
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
1)
2)
1) Remove Fan cable from J508, J507.
2) Remove a power cable from J502.
(J502 has a hook in the right side.)
3) Remove all LAN cable.
3)
39
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
1)
2)
40
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
2)
2)
1)
1)
2)
41
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
W101 routing
W102 routing
42
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
43
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
44
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
45
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950 VDR Service Manual
Fuse1215 (5ZFCK00017)
Fuse1203 (5ZFCK00016)
46
DOC No. 7ZPNA4409
2. MAINTENANCE
JCY-1900/1950
47
DOC No. 7ZPNA4409
3.
2) Battery voltage
Measure the battery voltage in the following procedure. (check the method written to the beacon).
When battery voltage is less than 2.5V, replace the beacon.
From serial number 18717-00-30336 on Less than 3.2V
From serial number 18717-00-30001 to 18717-00-30335 Less than 2.5V
Remove lead, measure the voltage between terminals with the multimeter.
48
DOC No. 7ZPNA4409
49
DOC No. 7ZPNA4409
Cotter pin
50
DOC No. 7ZPNA4409
Test passed after one single flash only. See the following table about error.
Number of flashes
1
2
3
4
5
6
7
Fault indication:
NONE
Low power on 406 MHz transmitter
Low battery voltage
Low power on 121.5 MHz transmitter
PLL on 406 MHz transmitter out of lock
PLL on 121.5 MHz transmitter out of lock
EPIRB module not programmed or programming not complete
Fault indication:
NONE
Did not acquire GPS position
Number of GPS TEST above limit (>60)
Normal SELF-TEST is performed after successful GPS TEST and position transmitted on 406.037 MHz. GPS position
may also be received on an EPIRB Tester for verification.
51
DOC No. 7ZPNA4409
52
DOC No. 7ZPNA4409
LAN
LEDs are incorporated into every LAN connector in RCU to display the status.
The lighting specifications of the LEDs
LED Name
LINK/ACT LED
(Yellow)
SPEED LED
(Green)
Lighting Specifications
Lights when the LINK is established
Blinks at the time of receiving or sending data.
Lights or blinks continuously in normal operation
Check the wiring and the power source when it is off.
Lights when the LINK is established on 100BASE-T.
Off when the LINK is established on 10BASE-T.
Lights or off in normal operation.
53
DOC No. 7ZPNA4409
System status
The MCB has LEDs that display RCU system status.
The lighting specifications of the LEDs
LED Name
SYSGreen/Red
REC Green/Red
ERRRed
Lighting Specifications
Lights green when RCU is operating.
Blinks green when RCU startup.
Blinks red when RCU shutdown.
Lights green when RCU is safemode.
Lights Green when RCU is recording.
Blinks Red when RCU is safemode.
Lights when some error occurs.
BATT.OPGreen/Red Lights Green when RCU is supplied power from the battery
Lights Red when the voltage of the battery is lower than the rated value.
Lights when SSD1 is supplied with power.
SSD1 Green
Lights when SSD2 is supplied with power.
SSD2 Green
Lights when Fan is supplied with power.
FAN Green
Lights green when RCU is supplied with power.
BATT Green
SYS
REC
ERR
SSD1
SSD2
FAN
expansion
54
DOC No. 7ZPNA4409
BATT.
OP
BATT.
Power
The lighting specifications of the LEDs
LED Name
2)
Lighting Specifications
POWERGreen
5.0VGreen
3.3VGreen
Audio record
The lighting specifications of the LEDs
LED Name
3)
Lighting Specifications
CD203Green
CD202Green
CD201Green
CD206Green
CD205Green
CD204Green
Reception Data
Exists.
Exists. (The cable may be connected reversely.)
Not exists.
55
DOC No. 7ZPNA4409
RX LEDs
56
DOC No. 7ZPNA4409
3.3.3. Battery
1) Expiration date
Check the expiration date written to the battery.
2) Battery voltage
To check the power supply battery voltage, use the maintenance software, or measure it at the following battery terminals with a digital volt-ohm meter.
Because when the battery is charged, the charge voltage is applied to the battery, the battery voltage cannot be measured correctly with the digital volt-ohm meter. Therefore measure the voltage when the RCU power is off.
If the battery voltage is lower than 12V, replace the battery with new one.
Specification of Battery charge:
After the power on, charges the battery for 20 hours continuity.
Charges the battery once a day for 10 minutes automatically.
When the RCU recovered from blackout, the battery will be charged for 10 times of the period which had
blackout.
57
DOC No. 7ZPNA4409
3.3.4. Fan
Check that the Fan is rotating according to the following.
1) Check that the wind has come out from the air vent of the RCU right-hand side.
2) Check that no Fan alert is displayed on the OPU.
Fan1
58
DOC No. 7ZPNA4409
Fan2
Dimmer screen
59
DOC No. 7ZPNA4409
60
DOC No. 7ZPNA4409
61
DOC No. 7ZPNA4409
COMMUNICATION
The lighting specifications of the LEDs:
LED Name
TXD1
RXD1
TXD2 (only NCT-83)
RXD2 (only NCT-83)
2)
Lighting Specifications
Lights when CH1 is transmitting.
Lights when CH1 is receiving.
Lights when CH2 is transmitting.
Lights when CH2 is receiving.
POWER
The lighting specifications of the LEDs:
LED Name
PWR(5V)
PWR(12V)
3)
Lighting Specifications
Lights when the DSC is supplied with 5V.
Lights when the DSC is supplied with 12V.
Dry Contact
This LEDs shows status of each dry contact signals.
Check the change of state of dry contact signals by the display of LEDs.
The lighting specifications of the LEDs:
LED Name
CDn
(NCT-82: n:1-32)
(NCT-83: n:1-64)
Lighting Specifications
OPEN: Green LED put out lights
CLOSE: Green LED lights up
62
DOC No. 7ZPNA4409
NCT-82 CQD-2284
*CD1-32
*CD1-64
NCT-83 CQD-2285
63
DOC No. 7ZPNA4409
SPEED LED
(Green)
Lighting Specifications
Lights when the LINK is established
Blinks at the time of receiving or sending data.
Lights or blinks continuously in normal operation
Check the wiring and the power source when it is off.
Lights when the LINK is established on 100BASE-T.
Off when the LINK is established on 10BASE-T.
Lights or off in normal operation.
64
DOC No. 7ZPNA4409
POWER
The lighting specifications of the LEDs:
LED Name
[24V](Green)
2)
Lighting Specifications
Lights when the DAU is supplied with power.
LAN
The lighting specifications of the LEDs:
LED Name
CH0:CD53
CH1:CD55(Green)
CH0:CD52
CH1:CD54(Green)
Lighting Specifications
Lights when the LINK is established
Blinks at the time of receiving or sending data.
Lights or blinks continuously in normal operation
Check the wiring and the power source when it is off.
Lights when the LINK is established on 100BASE-T.
Off when the LINK is established on 10BASE-T.
Lights or off in normal operation.
CH0
CH1
65
DOC No. 7ZPNA4409
WARNING
CAUTION
CAUTION
002
003
Error
type
001
Error
codes
Blackout
Recording stop
Indication
66
Contents
Actions to take
1) Operate the OPU, restart the record. (Refer to Instruction manual 4.8.4).
2) Replace the MCB. (Refer to Service manual 2.5.6)
* The document written in Chapter 5 of Installation Manual (Hardware Part) is written to Chapter 3 of the service manual too. (Operation Checking on hardware.)
TROUBLE SHOOTING
4.
4. TROUBLE SHOOTING
JCY-1900/1950 VDR Service Manual
CAUTION
WARNING
CAUTION
WARNING
006
007
008
Error
type
004
005
Error
codes
Battery high
charging voltage
Battery high
temperature
Battery failure
Indication
67
Contents
Actions to take
JCY-1900/1950
4. TROUBLE SHOOTING
CAUTION
INFO
INFO
INFO
041
059
060
061
CAUTION
Error
type
031
Error
codes
Float-free capsule
battery expiration date
OPU1 communication
failure
Time synchronization
failure
Indication
4. TROUBLE SHOOTING
JCY-1900/1950 VDR Service Manual
68
Contents
Actions to take
INFO
INFO
INFO
CAUTION
WARNING
CAUTION
063
-065
066
101
102
103
Error
type
062
Error
codes
Fixed capsule
recording failure
Fixed capsule
connection failure
Float-free capsule
HRU expiration date
FGU1(~3) fan
expiration date
Indication
69
Contents
* This alert occurs when radar picture size increases temporarily by an echo
etc. Within 48 hours, the past recording is deleted, and an alert is restored.
1) In order to down radar image file size, adjust gain of radar echo.
2) If not improved within 48 hours, replace the FPC.
Actions to take
JCY-1900/1950
4. TROUBLE SHOOTING
WARNING
CAUTION
CAUTION
WARNING
CAUTION
105
106
107
108
109
110
111
CAUTION
Error
type
104
Error
codes
Internal storage
(No.12) recording
failure
Internal storage
(No.12) access
failure
Float-free capsule
recording failure
Float-free capsule
connection failure
Float-free capsule
short store period
Indication
4. TROUBLE SHOOTING
JCY-1900/1950 VDR Service Manual
70
Contents
* This alert occurs, when radar picture size increases temporarily by an echo
etc. Within 720 hours the past recording is deleted, and an alert is restored.
1) In order to down radar image file size, adjust gain of radar echo.
2) If not improved within 720 hours, replace the SSD.
* This alert occurs when radar picture size increases temporarily by an echo
etc. Within 48 hours, the past recording is deleted , and an alert is restored.
1) In order to down radar image file size, adjust gain of radar echo.
2) If not improved within 48 hours, replace the FFC
Actions to take
Error
type
CAUTION
WARNING
WARNING
WARNING
CAUTION
Error
codes
201
-212
221
222
223
301
-324
Sensor reception
failure
(Serial CH1~24)
ARB initialization
failure
Microphone
(CH1~12) failure
Indication
71
Contents
1) Reboot the RCU. After reboot, check the LED of the ARB is blinking.
(Refer to5.3.2.)
2) Replace the ARB. Refer to Service manual 2.5.4.
3) Replace the MCB. Refer to Service manual. 2.5.6
* When the loud noise exists around the unit, even if the unit is normal, the
test may fail.
Actions to take
JCY-1900/1950
4. TROUBLE SHOOTING
WARNING
WARNING
CAUTION
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
325
-348
349
350
-373
374
-389
390
-399
400
401
402
461
Error
type
Error
codes
Gyro I/F
uninitialization
Sensor reception
failure
(SLC1-GYRO)
Sensor reception
failure
(SLC1-ADC)
Sensor reception
failure
(SLC1-CH1~10)
Sensor reception
failure
(SLC1)
Sensor reception
failure
(LAN CH1~24)
Serial port
(CH1~24)
initialization failure
Indication
4. TROUBLE SHOOTING
JCY-1900/1950 VDR Service Manual
72
Contents
Set initial setting with the OPU. (Refer to Instruction Manual 4.7.)
Actions to take
CAUTION
CAUTION
WARNING
502
503
504
WARNING
WARNING
WARNING
557
-559
560
-562
566
-568
513
-520
CAUTION
Error
type
501
Error
codes
FGU1(~3)
control failure
FGU1(~3)
communication Failure
Image reception
failure
(No.1~8)
FGU1(~3) fan failure
Indication
73
Contents
1) Check the connection. Check that the wind has come out from the vent of
the FGU.
2) Replace the Fan Refer to Service manual 2.7.2..
1) Check the connection of ECDIS. When using the FGU, check the setting of
the FGU. (Refer to Installation Manual (Software Part) 10.2.
Actions to take
JCY-1900/1950
4. TROUBLE SHOOTING
5.
74
DOC No. 7ZPNA4409
SERGE
IE C 6 1 1 6 2 - 2 C H 1 / 2
IE C 6 1 1 6 2 - 1 C H 3 - 6
RX17_A
RX17_B
RX18_A
RX18_B
RX12_A
RX12_B
RX13_A
RX13_B
RX14_A
RX14_B
RX15_A
RX15_B
RX16_A
RX16_B
IE C 6 1 1 6 2 - 1 C H 7 - 1 1
IE C 6 1 1 6 2 - 1 C H 1 2 - 1 6
RX19_A
RX19_B
TX19_A
TX19_B
GND19_C
RX20_A
RX20_B
TX20_A
TX20_B
GND20_C
RX21_A
RX21_B
RX22_A
RX22_B
RX23_A
RX23_B
TX23_A
TX23_B
GND23_C
RX24_A
RX24_B
TX24_A
TX24_B
GND24_C
IE C 6 1 1 6 2 - 1 C H 1 9 / 2 0
O P T IO N P O R T C H 2 1 - 2 4
RX7_A
RX7_B
RX8_A
RX8_B
RX9_A
RX9_B
RX10_A
RX10_B
RX11_A
RX11_B
1A
1C
1B
2A
2C
2B
3A
3C
3B
1+
12+
23+
3-
6.
RX1_A
RX1_B
TX1_A
TX1_B
GND1_C
RX2_A
RX2_B
TX2_A
TX2_B
GND2_C
RX3_A
RX3_B
RX4_A
RX4_B
RX5_A
RX5_B
RX6_A
RX6_B
75
1
2
3
4
5
6
7
8
CDC-1900 OPB
J706
76
20
25
20
25
40
40
VBUS
DD+
GND
J703
USB
SP+
SP-
J704
1
2
3
4
1
2
1
2
35
35
30
15
15
30
10
10
SPEAKER
VLEDVLED+
GND
R0
R1
R2
R3
R3
R4
R5
R6
R7
G0
G1
G2
G3
G4
G5
G6
G7
B0
B1
B2
B3
B4
B5
B6
B7
GND
CLKIN
EDGSL
HSD
VSD
DEN
NC
GND
XR
YD
XL
YU
DD1
0.8W SPEAKER
U238S44-B
SP1
YB-TG800480S03A
FRONT PANEL
JCY-1900/1950
TXP
TXM
RXP
DC24V
DC24V
RXM
DGND
DGND
J702
LAN
LCD
77
DOC No. 7ZPNA4409
P301
VHR-2N
NC 1
NC 2
+5V 3
GND 4
TB302
TB301
H-7JTJD0029(WAGO)
CH0
CH1
CH2
TB302
H-7JTJD0029(WAGO)
CH4
CH3
CH5
CH6
CH7
CH0+
CH0CH1+
CH1CH2+
CH2CH3+
CH3-
1
2
3
4
5
6
7
8
CH4+
CH4CH5+
CH5CH6+
CH6CH7+
CH7-
W104 H-7ZCJD0263
P103
J102 P102
DF1BZ-4P-2.5DS DF1B-4S-2.5R
1
NC
NC 2
+5V 3
GND 4
HIF3BA-30D-2.54DS
J103
HIF3BA-30PA-2.54DS(71)
J101 P101
B3PS-VH(LF)(SN)JST) VHR-3NJST)
1
+12V
2
3
AC(L) AC(N) FG
P1 B3P5-VH(JST)
5
FL201
AC Line Filter
CBJ-166
DSB CQD-2284
123
CN1
CH1
CH2
TB1
3 2 1
P201
AC100220v(1)
50/60Hz
N.C.
E V U
CH3
CH4
CH5
CH6
CH7
CH8
- + - + - + - + - + - + - + - +
- + - + - + - + - + - + - + - +
32
16
17
1 TB1
16
32 TB2
CH32 CH31 CH30 CH29 CH28 CH27 CH26 CH25
-+-+-+-+-+-+-+-+
-+-+-+-+-+-+-+-+
1
17
Dry Contact x 32
78
DOC No. 7ZPNA4409
VHR-5N(JST)
+12VGND
TB101
H-7JTNA4033
(WAGO)
RX_A 1
RX_B 2
TX_A 3
TX_B 4
G(GND) 5
P51 B4P-VH(JST)
AC/DC
Power Supply
Unit
TB301
1
2
3
4
5
6
7
8
12v 30w
ADC CEF-60
J302
DF1BZ-4P-2.5DS
VHR-4N(JST)
W201
7ZCNA4213
W102
7ZCJD0238
+5V 1
PS201
OZ-030-12-J00
J301
B2P-VH(LF)(SN)
P303
HIF3BA-30D-2.54DS
J303
HIF3BA-30PA2.54DS(71)
79
DOC No. 7ZPNA4409
80
Red
2 1
(- +)
J22
Black
SLC
AOC
GIF
P401
AC100220v(1)
50/60Hz
CN2
B4P-VH(JST)
123
CN1
CN1
B3P5-VH(JST)
FG AC(N) AC(L)
24v 30w
VHR-4N(JST)
VHR-5N(JST)
PS401
OZ-030-24-J00
AC/DC
Power Supply
Unit
TB1
JCY-1900/1950
FL401
AC Line Filter
CBJ-166
W401 H-7ZCNA4212
3 2 1
E V U
J822
J821
J815
7. SPECIFICATIONS
JCY-1900/1950
7. SPECIFICATIONS
7.1. NDH-338 Fixed Protective Capsule Unit
Performance
a)
Interface
1)
Standard
2)
Protocol
b)
Recording duration and capacity
1)
Duration
2)
Capacity
c)
Data recording interval
1)
Sensor data
2)
Audio data
3)
Image data
d)
e)
4)
5)
Battery specifications
Environmental condition
The recording data in the final recording medium shall be held without loss under below the condition.
a)
Shock
A half sine-wave pulse of 50 G, with a duration of 11msec
b)
Penetration
A mass of 250 kg with a pin of 100mm diameter, dropped from 3m
c)
Fire
10 hours with 260C fire
1 hour with 1100C fire
d)
Deep-sea pressure and immersion
Immersion in sea water at pressure of 60 MPa (equivalent to a
depth of 6000m)
Environmental condition
a)
Operating temperature
b)
Storage temperature
c)
Vibration
General specification
a)
Input voltage range
b)
Power consumption
c)
Size
d)
Mass
e)
Color
DC +19.5 to +36.5V
5W
185(w) x 252(d) x 275(h) mm
6.8kg
ORANGE
81
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
Locator Light
Transmitter operation
1)
Operating time
2)
Expectant battery age
3)
f)
g)
h)
i)
Battery specifications
406MHz Transmitter
1)
Frequency
2)
Output power
121.5MHz Transmitter
1)
Frequency
2)
Output power
Hydrostatic Release Mechanism
1)
Operating depth
2)
Expectant age
Compass safety distance
1)
Standard
2)
Steering
Environmental condition
a)
Degree of protection
b)
Operating temperature
c)
Storage temperature
General specification
a)
Input voltage range
b)
Power consumption
c)
Size
d)
Mass
e)
Color
82
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
d)
e)
3)
Recording interval
Bridge audio input
1)
Interface
2)
Input channel
3)
Recording interval
4)
Frequency response
VHF communications audio input
1)
Interface
2)
Input channel
3)
4)
Recording interval
Frequency response
83
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
Performance (continued)
f)
Image data input
1)
Standard
2)
Input channel
3)
Recording interval
4)
g)
h)
i)
j)
k)
l)
Image format
Internal medium
1)
Duration
2)
Capacity
3)
Medium
Blackout processing
1)
Recording duration
2)
3)
Battery specifications
4)
IEC61162-450
up to 6 channel (image sources on the network)
15 seconds per each image
(X-Band Radar, S-Band Radar, Main-ECDIS and Sub-ECDIS)
*Recording of each image is selected automatically.
PNG format
*Average image size : 512KB or less
720 hours
512GB
Solid State Drive
2 hours while blackout
(only bridge conversation etc. except VHF communication)
less than 1 minute
(Recovery time from blackout operation to normal operation on
restoration of power supply)
Lead-acid battery
DC +12V 24Ah
4.5-years after manufacturing.
(ambient temperature: 25 C, load: 70%)
Please note that lifetime may be shorter depending on environmental condition
IEEE802.3 (10Base-T/ 100Base-TX)
TCP/IP
DC +24V 5%
Dry contact
System down (normal-close or open)
1A or less at DC +24V / 0.5A or less at 125Vac
Dry contact
(also serve for External Contact Input)
Recording GPS selection (active open/close)
0.9m
0.5m
84
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
Environmental condition
a)
Operating temperature
b)
Temperature and humidity
c)
Vibration
d)
Protection class
General specification
a)
Power voltage
b)
c)
d)
e)
Power consumption
(including the fixed protective capsule unit,
and the float-free capsule unit, the operation
panel unit, and microphone)
Size
Mass
Color
85
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
Operation
USB connector
Compass safety distance
1)
Standard
1)
Steering
Environmental condition
a)
Operating temperature
b)
Temperature and humidity
c)
Vibration
d)
Protection class
General specification
a)
Power voltage
b)
Size
c)
Mass
d)
Color
DC +24V 5%
225(w) x 37.5(d) x 136(h) mm (without projection)
0.8kg
N2.5 semi-gloss
86
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
Protection class
General specification
a)
Size
b)
Mass
c)
Color
87
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
Protection class
General specification
a)
Size
b)
Mass
c)
Color
88
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
Dry contact
Up to 64 channels
DC +12V
Normal Close / Normal open
Connect to the RCU
IEC61162-1
0.4m
0.2m
Protection class
General specification
a)
Power voltage
b)
c)
d)
e)
Power consumption
Size
Mass
Color
89
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
Dry contact
Up to 32 channels
DC +12V
Normal Close / Normal open
Connect to the RCU
IEC61162-1
0.3m
0.2m
Protection class
General specification
a)
Power voltage
b)
c)
d)
e)
Power consumption
Size
Mass
Color
90
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
b)
c)
Refresh rate
5)
Recording interval
Communication port
Compass safety distance
1)
Standard
2)
Steering
Environmental condition
a)
Operating temperature:
b)
Temperature and humidity:
c)
Vibration:
d)
Protection class
General specification
a)
Power voltage
b)
c)
d)
e)
Power consumption
Size
Mass
Color
2 channels
analog RGB/Hs/Vs
0.7Vp-p (video signal)
TTL
TTL
640 x 350 to 1600 x 1200 pixel (according to VESA DMTS)
1920 x 1200 pixel (according to VESA CVT RB)
60 to 85 Hz (according to VESA DMTS)
(Resolution 1600 x 1200 pixel, 1920 x 1200 pixel 60Hz only)
1 image every 15 seconds (each channel)
Connect to the RCU via Ethernet
0.6m
0.3m
91
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
b)
Output sentence
Environmental condition
a)
Operating temperature
b)
Temperature and humidity
c)
Vibration
d)
Protection class
General specification
a)
Power voltage
b)
c)
d)
e)
Power consumption
Size
Mass
Color
8 channels
2 channels
IEEE802.3 (10Base-T/ 100Base-TX)
TCP/IP
0.9m
0.5m
92
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
Protection class
General specification
a)
Size
b)
Mass
c)
Color
93
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950 VDR Service Manual
b)
c)
AC100/110/115/120V 10%
AC200/220/240V 10%
50Hz 5%
60Hz 5%
94
DOC No. 7ZPNA4409
7. SPECIFICATIONS
JCY-1900/1950
Environment condition
a)
Exposed type equipment
1)
2)
3)
4)
b)
1)
2)
3)
c)
95
DOC No. 7ZPNA4409
8. ANNUAL INSPECTION
8.1. Declaration on Completion of Annual Inspection for VDR
It's being adjusted
JCY-1900/1950
VOYAGE DATA RECORDER (VDR)
SIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
SERVICE MANUAL
URL
http://www.jrc.co.jp
01ETM
JRC
Printed in Japan