Professional Documents
Culture Documents
Catalogue
Publisher
INA MAZIVA Ltd.
Radnika cesta 175
10000 Zagreb
For the publisher:
Andrej olaja, B.Sc. Eng
Editorial board
Editor-in-chief
Damir Andri, B.Sc. Eng
Editors
Bruno Novina, B.Sc. Eng
Miroslav Felja, B.Sc. Eng
Members
Ljiljana Pedii, B.Sc.Eng
Mr. Kamil Nahal, B.Sc. Eng
Tona aleta Proli, B.Sc. Eng
Design and pre-press
Natalija ataj
Norma International
Zagreb, February 2014
Introduction
This catalogue is for the general use of INA lubricant users and INA employees,
with the basic purpose of assisting them in the selection of an appropriate
lubricant for specic applications. For more detailed information or professional
help in the selection of lubricants according to dened requirements,
specications or due to specic working conditions, users can contact the
manufacturer directly at the addresses enclosed with this catalogue.
The INA lubricant program is produced at the INA MAZIVA Ltd. site, Radnika
cesta 175, Zagreb.
INA retains the right to modify the type and size of packaging according
to market requirements, to develop new products or improve the quality of
products listed in this catalogue.
Product information can also be found at www.ina.hr or www.maziva.hr.
INA-Industrija nafte, Plc. Zagreb was one of the rst companies in Croatia
that introduced a quality management system, followed by an environmental
protection management system and health and safety management system.
Accordingly, INA MAZIVA Ltd. possesses certicates in accordance with the
ISO 9001:2000, ISO 14001:2004 standards and the OHSAS 18001:2007
specication obtained from the company Bureau Veritas Quality International.
INA MAZIVA Ltd. laboratories possess the Certicate of Accreditation obtained
from the Croatian Accreditation Agency in accordance with the requirements
of the HRN EN ISO 17025:2007 standard.
It must be noted that INA aspires to avoid or reduce the impact on the
environment and peoples health. Therefore, INA lubricants do not contain
lead, organically bound chlorine, nitrites and diethanolamine, and the content
of phosphorus, zinc and antimony, etc. is reduced. The system for returning
waste and used oils has been in operation for a few years, and the offer in
INA lubricants sales and service was thus enriched.
ISO certicates
For our customers and users, we ensure and distribute all the necessary
technical documentation on lubricants, which involves the following:
recommendations and instructions for lubricant application;
lubrication plans,
technical product data,
user permits for the application of INA lubricants obtained from renowned
vehicle and equipment manufacturers, and
instructions on the management of waste oils.
Application engineers, experts in lubricants, know the issues of lubrication
and maintenance of machines and vehicles very well. Therefore they are of
especially signicant assistance to maintenance personnel in complex facilities
with long-term oil llings, in industry, as well as in car transport organizations,
shipping companies, thermo- and hydro-energy facilities etc., where a timely
and comprehensive control of the lubricant status in use is important for
safe and long-term operation. With the support of laboratories, using our
own experience and databases in the long and successful application of our
lubricants, we offer our customers additional safety in product valorization. In
the long-term, this approach signicantly reduces overall maintenance costs
and provides security in operation. Thus, mutual trust is built and the customers
are sure they will achieve optimal results by purchasing INA lubricants.
Table of Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 process oils.......................................................................42
17 lubricants for die-casting of metals ..................................43
18 other industrial oils ............................................................43
G other products
INA Millennium
INA Star
11
SAE Viscosity
Grade
5W-40
5W-30
5W-40
5W-30
Kinematic
Viscosity at
100 C, mm2 /s
14,0
12,0
13,5
12,0
TBN,
mg KOH/g
11,0
6,5
Fully synthetic top quality low SAPS engine oil that enables fuel saving,
intended for high performance gasoline and diesel engines of passenger cars
with built-in modern Three Way Catalysts (TWC) or particle lters (DPF). Meets
the requirements of: SAE 5W-30; ACEA C3-10.
Approved for: VW 504.00/507.00, MB-Approval 229.51, BMW Longlife-04.
7,5
Synthetic top quality low SAPS engine oil for lubrication of high-performance
gasoline and diesel engines of passenger cars and smaller delivery vehicles
with built-in modern Three Way Catalysts (TWC) or particle lters (DPF).
Optimal lubrication at extreme temperatures, enabling immediate motor start
at low temperatures.
Meets the very strict requirements of: ACEA A3/B4-04 and C3-10, API SN/CF,
BMW Longlife-04.
Approved for: VW 505.01/505.00/502.00, MB-Approval 229.51
11,5
Synthetic engine oil for lubrication of modern gasoline and diesel engines of
passenger cars which enables fuel saving with an extended oil drain period.
Meets the requirements of: SAE 5W-30, ACEA A3/B4-10, API SL/CF, Opel
GM-LL-A-025, Opel GM-LL-B-025 and Renault RN0700.
Approved for: VW 502.00/505.00, MB-Approval 229.5, BMW Longlife-01.
12
INA Code
INA Delta 5
SAE Viscosity
Grade
10W-40
10W-40
15W-40
20W-50
15W-40
20W-50
Kinematic
Viscosity at
100 C, mm2 /s
14,2
14,2
14,5
18,5
14,5
18,5
TBN,
mg KOH/g
8,5
8,5
8,5
8,5
Standard quality mineral engine oil for lubrication of four-stroke gasoline and
diesel motors of passenger cars and smaller delivery vehicles. The SAE 20W50 viscosity grade is particularly recommended for engines whose engine
systems are more worn out and whose oil consumption is increased. Meets
the requirements of API SJ/CF, CCMC G4/PD2, MIL-L-46152D.
5,5
5,5
Mineral engine oil suitable for lubrication of four-stroke gasoline and diesel
engines of passenger cars without a turbocharger and catalyst, including
vehicles that run on natural gas and do not require special quality engine oil. The
SAE 20W-50 viscosity grade is particularly recommended for engines in which
engine systems are more worn out and whose oil consumption is increased.
Meets the requirements of: API SF/CD, CCMC G2, MIL-L-46152C.
13
SAE Viscosity
Grade
10W-40
5W-30
10W-40
Kinematic
Viscosity at
100 C, mm2 /s
13,7
11,7
14,0
TBN,
mg KOH/g
10,0
Top quality synthetic low SAPS engine oil primarily intended for lubrication
of diesel engines of industrial vehicles in heavy duty conditions, with a particle
lter (DPF) and an EGR or SCR system for processing exhaust gases that meet
the Euro 4 / Euro 5 requirements regarding exhaust gas emission.
Meets the very strict requirements of: ACEA E6-10/E7-10, API CI-4, MTU Type
3.1, Deutz DQC III-10, Cummins CES 20077/20076.
Approved for: MB-Approval 228.51, MAN M 3477, Volvo VDS-3, MackEO-N
and Renault VI RLD-2.
12,5
Top quality fully synthetic Extra High Performance Diesel (XHPD) engine oil
designed for use in Euro 3 and Euro 4 diesel engines. It is suitable for lubrication
of most diesel engines with an exhaust gas recirculation (EGR) or a selective
catalyst (SCR) and for engines without particle lters (DPF). The oil ensures
extraordinary cleanliness of the engine, signicant reduction of the wearing out
of engine parts, formation of soot and sediment, and cylinder polishing.
Meets the requirements of: SAE 5W-30, ACEA E7-08 issue 2/E4-08 issue 2,
API CI-4, Caterpillar ECF-2, MTU Type 3, Deutz DQC IV-10 and DAF HP1/HP2.
Approved for: MB-Approval 228.5, MAN M 3277, MAN M 3377, Volvo VDS-3,
Mack EO-N, Renault VI RLD-2 and Cummins CES 20078/20077/20076.
13,0
Top quality synthetic Extra High Performance Diesel (XHPD) engine oil for
lubrication of Euro 3 and Euro 4 diesel engines of industrial vehicles that
operate in the most difcult conditions, have an extended oil drain period and
use diesel as fuel. It is suitable for lubrication of engines with EGR or systems
for processing exhaust gases and for engines without particle lters (DPF).
Meets the very strict requirements of: ACEA E7-08/E4-08, API CI-4/CF, and
MTU Type 3.
Approved for: MB-Approval 228.5, MAN M 3277, Volvo VDS-3, Mack EO-N
and Renault VI RLD-2.
14
INA Code
SAE Viscosity
Grade
15W-40
15W-40
Kinematic
Viscosity at
100 C, mm2 /s
14,5
14,5
TBN,
mg KOH/g
10,5
Super High Performance Diesel mineral engine oil for lubrication heavily loaded
diesel engines of industrial vehicles with turbochargers in extreme heavy duty
conditions that use Eurodiesel as fuel, enabling signicantly extended oil drain
periods. It is suitable for lubrication of engines without particle lters (DPFs)
and most engines with EGR or SCR systems of exhaust gas processing.
Meets the requirements of: ACEA E7-08/E5-02/E3-96 issue 4, API CI-4/
CH-4/CG-4/SL, Caterpillar ECF-2 and Volvo VDS-3.
Approved for: MB-Approval 228.3, MAN M 3275-1, and Cummins CES
20078/20077/20076.
12,0
Super High Performance Diesel (SHPD) mineral engine oil designed for use
in high performance Euro 1 / Euro 2 diesel engines of industrial vehicles that
operate in heavy duty conditions, with extended oil drain periods, and use all
kinds of diesel fuels.
Meets the requirements of: ACEA E3-96 issue 4, API CG-4/CF/SL, MTU Type 2.
Approved for: MB-Approval 228.3, MAN M 3275-1 and Volvo VDS-2.
INA Super 5
15W-40
30
40
14,5
11,2
14,5
11,0
11,0
11,0
High quality mineral engine oil intended for lubrication of all kinds of diesel
engines in industrial vehicles, with no special modern requirements, in difcult
operating conditions in transport, construction, agriculture, etc. It is suitable for
use in mixed car and machine parks.
Meets the requirements of: SAE 30 & 40: ACEA E2-96 issue 5, API CG-4/
CF/SL, MB 228.0, MAN 270, Volvo VDS and MTU Type 1.
SAE 15W-40: ACEA E2-96 issue 5, API CG-4/CF/SL, MTU Type 1.
Approved for (SAE 15W-40): MB-Approval 228.1, MAN 271and and Volvo VDS.
INA Super 3
15W-40
10W
20W-20
30
40
50
14,5
6,0
8,5
11,2
14,5
18,5
9,5
9,0
9,0
9,0
9,0
9,0
INA Code
A
INA Lokomol HS
INA 2T Scooter
14,5
TBN,
mg KOH/g
13,5
Special fth generation mineral engine oil, specially developed for two-stroke
General Motors engines Electro Motive Division locomotive diesel engines,
with our without turbo-charge, using fuels with an increased share of sulfur.
Meets the requirements of: API CF/CF-2, LMOA 5th generation. Approved for:
General Motors - EMD.
Kinematic
Viscosity at
100 C, mm2 /s
Flash point
(COC),C
10,3
90
Top quality partially synthetic, low-ash engine oil serves as a fuel additive for lubrication of
two-stroke engines, especially mopeds and road scooters. Meets the requirements of API
TC++, ISO-L-EGD, JASO FD, TISI 1040-1998.
15
40
Kinematic
Viscosity at
100 C, mm2 /s
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
7,4
Flash point
(COC),C
100
Premium high-performance mineral-based engine oil serves as a fuel additive for lubrication
of water-cooled outboard two-stroke gasoline engines of great power. Recommended for
Yamaha, Mercury, Honda, Suzuki, Tohatsu, Johnson, OMC.
Meets the requirements of engine tests Mercury 15HP, OMC 40HP, OMC 70HP and placed
on the NMMA TC-W3 list.
16
INA Code
Kinematic
Viscosity at
100 C, mm2 /s
Flash point
(COC),C
8,2
96
INA Code
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
30
10,7
High-quality low ash engine oil serves as a supplement to fuel for lubrication of air-cooled
two-stroke engines, especially chainsaws.
Meets the requirements of API TC+, JASO FC and ISO L-EGC.
TBN,
mg KOH/g
7,4
TBN,
mg KOH /g
INA Actinia B
INA Rubella X
SAE Viscosity
Grade
50
30
40
Kinematic
Viscosity at
100 C, mm2 /s
19,5
11,7
14,5
70,0
High-quality marine cylinder mineral oil for single use, specially designed for
lubrication of pistons and cylinders of low-speed marine crosshead diesel
engines used in boat propulsion. High-alkaline oil reserve enables the use of
heavy residual fuels with high sulfur content.
40,0
40,0
INA Code
A
INA Rubella
INA Gorgonela S
INA Sagartia
INA Sagartia S
17
SAE Viscosity
Grade
30
40
30
40
50
60
30
40
30
40
Kinematic
Viscosity at
100 C, mm2 /s
11,7
14,5
11,7
14,5
18,5
23,5
11,7
14,5
11,7
14,5
TBN,
mg KOH /g
30,0
30,0
12,5
12,5
12,5
12,5
8,0
8,0
5,0
5,0
Multi-purpose mineral engine oil designed for crankcase lubrication in lowspeed two-stroke marine diesel engines that burn heavy residual fuels. Can
be used for lubrication of gearboxes, turbochargers, compressors, in hydraulic
systems, stern tube bearings, deck machinery, etc. Passes the 10thFZG
test load stage.
18
INA Code
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
Viscosity
Index
75W-90
15,4
154
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
Viscosity
Index
80W-90
80W-90
85W-140
90
103
100
26,2
97
17,0
92
15,3
14,7
INA Code
A
INA Hipenol GTL LS
INA Hipenol
GTL
INA Code
INA Transmol HD
INA Transmol HD
INA Transmol DB
INA Umol ZC
INA Epol SP 68
19
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
Viscosity
Index
90
17,0
94
80W
90
SAE Viscosity
-90
80W
Grade
140
Kinematic
17,3
Viscosity
at14,0
100 C,
28,0
mm2/s
9,3
100
92
Viscosity
100Index
90
75W-80
80W-90
80W
9,5
15,8
9,9
128
100
95
80W-90
16,0
95
80
8,5
90
20
Kinematic
Viscosity at
100 C, mm2 /s
7,5
7,5
7,7
Viscosity
Index
195
Premium fully-synthetic multi-.purpose oil for automatic transmissions and power steering
units of road and off-road vehicles with extended oil drain periods up to 120 000 km.
Meets the very strict requirements of GM Dexron IIE, Allison C-4, Caterpillar TO-2, Ford
Mercon, and other manufacturers such as Renk, Sperry-Vickers, Denison and Sundstrand.
Placed on lists ZF TE-ML 04D, 09X, 14B, 16L and Voith H55.6336.XX (G 1363).
174
Multi-purpose mineral- and hydrocracked oil (HVI) based oil designed for use in automatic
transmissions power steering units of road and off-road vehicles.
Meets the requirements of GM Dexron IIIG, Ford Mercon, Allison C-4, Caterpillar TO-2,
as well as the requirements of other manufacturers such as Sperry-Vickers, Denison and
Sundstrand. Placed on lists MAN 339 Typ Z1 and ZF TE-ML 04D, 14A and 17C.
157
7,7
150
Multi-purpose mineral-based oil designed for use in automatic transmissions and power
steering units of road and off-road vehicles.
Meets the requirements of GM Dexron IID, Allison C-4 and Caterpillar TO-2. Application
approvals: MB-Approval 236.6, ZF TE-ML 03D, 04D, 11A, 14A, 17C, Voith H55.6335.XX (G
607), MAN 339 Typ V1 and MAN 339 Typ Z1.
7,7
172
Mineral-based oil applied in lling automatic transmission and torque converters in motor
vehicles and construction machinery, bulldozers, loaders, graders, etc. for which GM Type A
Sufx A quality level is prescribed.
INA Code
21
INA Fluid V 32
INA Code
INA Transmatik
Kinematic
Viscosity at
100 C, mm2 /s
Viscosity
Index
5,4
100
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
10W
30
5,9
11,3
103
95
22
tractor oils
INA Code
INA Agrina
INA Code
INA Transhidrol ZF
INA Transhidrol
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
TBN,
mg KOH/g
10W-30
10W-40
10,60
14,80
11,80
11,80
SAE Viscosity
Grade
Kinematic
Viscosity at
100 C, mm2 /s
Viscosity
Index
120
162
Top quality multi-purpose mineral based oil (UTTO) used for lubrication
of hydraulics and gear transmissions, and for cooling and lubricating wet
brakes in the most modern types of tractors. It is especially recommended
for lubrication of axles operating under heavy load, joint shafts and nal drive
gearboxes. Meets the specication requirements: API GL-4, Caterpillar TO-2,
John Deer J20C, Case MS 1207, Ford M2C 134 D, Ford M2C 86-C, Massey
Ferguson CMS M1143, Volvo WB 101.
20W-40
10W-30
13,4
10,3
INA Code
A
INA Transhidrol
JD 50
INA Transhidrol 85
80W
85W
Kinematic
Viscosity at
100 C, mm2 /s
9,8
11
Viscosity
Index
120
100
23
SAE Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point C
14,0
-60
13,4
-50
High-viscosity-index, low-pour-point mineral oil for lling hydraulic shock absorbers in all
weather conditions.
22,0
-45
Mineral oil for shock absorbers and automotive dumper truck hydraulics in modern vehicles
and similar machines in all weather conditions. Meets the requirements of DIN 51524/2 HLP
specication.
24
INA Code
Pour
Point C
INA Kiperol 20
10,0
-40
Mineral oil for dumper truck hydraulics and hydraulics of similar machines in all weather
conditions.
It is especially recommended for dumper hydraulics of Mercedes Benz vehicles.
Meets the requirements of DIN 51524/2 HLP specication.
46,0
-36
10
Kinematic
Viscosity at
40 C, mm2 /s
Wet Boiling
Point C
182
Boiling
Point C
278
Synthetic hydraulic-brake uid with high-balance wet boiling point and low viscosity at low
temperatures for use in latest vehicles and especially intended for braking systems with the
combination of ASB, ASC and ESP/DSC braking regulation devices.
Meets the requirements of ISO 4925 Class 5-1, SAE J1704 and US FMVSS 116 DOT 5.1 and
DOT 4
173
272
Synthetic hydraulic brake uid for automotive applications, especially in passenger cars where
low viscosity at low temperatures enables uninterrupted operation of the braking regulation
devices in passenger cars (ABS, ASC and ESP). Meets the requirements of: ISO 4925 Class
6, SAE J1704, US FMVSS 116 DOT 4 and DOT 3.
INA UKA 4
170
265
Synthetic uid designed for lling hydraulic brakes and hydraulic couplings in motor vehicles.
Meets the requirements of: ISO 4925 Class 4, SAE J1704, US FMVSS 116 DOT 4 and DOT 3.
INA UKA 3
150
230
Synthetic uid for hydraulic braking systems and hydraulic couplings in motor vehicles. Meets
the requirements of ISO 4925 Class 3, SAE J1703 and US FMVSS 116 DOT 3.
INA Code
A
oils and uids for engines and
automotive applications
INA LHM+
25
11
Kinematic
Viscosity at
100 C, mm2 /s
Pour
Point C
6,5
-50
INA Antifriz BS
Super
Freezing point
of antifreezewater (1:1)
mixture C
-37
-37
-35
Boiling
Point C
180
Ethylene-glycol-based uid without silicates, intended for the protection of engine and vehicle
cooling systems from freezing in winter and boiling over in summer, providing protection from
corrosion with extended drain period.. INA Antifriz BS Super is a concentrate that must be
mixed with water before use. Meets the requirements of VW/Audi/Seat/koda TL 774 D/F
and MTU MTL 5048.
Application approval MAN 324 Typ SNF.
175
Ethylene-glycol-based uid with the addition of appropriate additives for the protection of
the engine cooling system against freezing in winter and boiling over in summer, providing
outstanding protection from corrosion, especially aluminum alloys. Before use mix with water
in a suitable ratio. It can be used in central heating systems.
Completely meets the requirements of VW/Audi/Seat/koda/Porsche TL 774 C, BMW N 600
69.0, Opel/GM B 040 0240, Saab 6901599. Application approvals: MB-Approval
325.0, MAN 324 Typ NF, MTU MTL 5048, Deutz TR 0199-99-1115 and TR 0199-99-2091
(KHD H-LV 0161 0188).
165
Ethylene-glycol-based uid designed for protection of engine cooling system from freezing in
the winter and boiling over in the summer, with very good anticorrosive properties. Before use
mix with water in the appropriate ratio.
Meets the requirements of the standard BS 6580, ASTM D 3306 and AFNOR NF R15-601.
26
INA Code
Boiling
Point C
INA Antifriz BS 40
-37
109
Ready-mixed ethylene glycol based cooling uid with no silicate content, intended for direct
lling of engine cooling systems. Provides protection of the engine cooling system from
freezing in the winter and boiling over in the summer, and ensures protection from corrosion
with extended drain period.
INA Antifriz Al 40
-37
108
Ready-mixed ethylene-glycol-based cooling uid for direct lling of engine cooling systems.
Provides protection of the engine cooling system against freezing in winter and boiling over in
summer, along with outstanding anticorrosive properties, especially aluminum alloys.
107
Ready-mixed cooling uid based on ethylene-glycol and appropriate additives for protection
against corrosion, intended for direct lling of engine cooling systems. Provides protection
of the engine cooling system from freezing in winter and boiling over in summer and against
corrosion. It is recommended to change the cooling uid after a period of two years.
108
Ethylene-glycol-based cooling uid, intended for protection of the engine cooling system
against freezing in the winter and boiling over in summer, providing long-term protection
against corrosion of all engine metals, including aluminum and iron alloys. The ready-mixed
uid is intended for direct lling of cooling systems in heavily loaded diesel, gasoline and gas
engines of high power, as well as stationary machines. It contains extended-life carboxylate
inhibitors, as well as nitrites and molybdates that protect the engine from cavitation. Since the
product does not contain silicates, the heat transmission is better than in conventional cooling
uids with silicates. INA Antifriz ELC 40 meets the requirements of specications CAT EC-1
and ASTM D 6210, as well as the requirements of most manufacturers of heavily loaded
vehicles: Caterpillar, Cummins, Detroit Diesel, International, Mack and Volvo.
Also meets the requirements: ASTM D 3306-00a Type III; ASTM D 6210; TMC RP 329; TMC
RP 338 and SAE J1034
INA Antifriz 40
Freezing
Point C
-35
-36
12
Boiling
Point C
Pour
Point C
INA Pneumol
80
-60
Alcohol-based uid assures the correct functioning of air brakes in vehicles and pneumatic
systems and machines, even at low temperatures.
86
-25
Ethyl alcohol-based uid designed for cleaning automobile windscreens. Cleans surfaces
from inorganic and organic stains. Does not freeze up to -25 C.
INA Autoglas E 30
87
-30
Ethyl alcohol-based uid designed for cleaning automobile windscreens in the winter period.
Easily removes all inorganic and organic stains. Does not freeze up to -30 C.
INA Autoglas
100
-3
Fluid designed for cleaning automobile windscreens only during the summer period. Ensures
great visibility and removes inorganic and organic stains, particularly insect remains.
Density at
20 C, g/cm3
pH value of
10% solution
9,9
AdBlue is a 32.5% solution of urea in demineralized water. It is injected into the SCR catalyst
(selective catalytic reduction catalyst) in the latest heavily loaded diesel vehicles (trucks,
industrial vehicles and buses) in order to meet the requirement for emission according to the
EURO 4 and EURO 5 standards.
AdBlue is lled into a special container in the vehicle. The adding amount is 45 volume %
for the amount of fuel in vehicles with EURO 4 engine type and 56 volume % for the amount
of fuel in vehicles with EURO 5 engine type. It meets the requirements of the ISO 22241-1
specication.
INA Code
INA Code
AdBlue
27
1,09
28
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
5
10
15
22
32
46
68
100
150
220
320
5
10
15
22
32
46
68
100
150
220
320
90
90
95
95
100
100
95
92
93
92
90
High quality mineral hydraulic oils. Due to very good lterability properties,
these oils are especially suitable for sensitive hydraulic systems with ne
lters, servo units and numerically controlled machine tools, as well as for
similar purposed where higher working temperatures are achieved. They can
be used in pumps that contain parts made of colored metal alloys.
Completely meet the very strict requirements of ISO 6743/4 HM, ISO 11158
HM, DIN 51524/Teil 2 HLP, EATON (Vickers) I-286-S and EATON (Vickers)
M-2950-S. Placed on lists Parker Hanifn-Denison HF-0, HF-1, HF-2 (ISO VG
32, 46 and 68) and Cincinnati Machine P-68 (ISO VG 32), P-69 (ISO VG 68)
and P-70 (ISO VG 46).
INA Hidraol HD
22
32
46
68
100
150
220
320
22
32
46
68
100
150
220
320
95
100
100
95
92
92
92
92
15
22
32
46
68
15
22
32
46
68
133
152
155
153
135
INA Code
31
A range of high quality mineral hydraulic oils with high viscosity index and very
good low temperature properties for hydraulic systems exposed to very low
temperatures or where strong temperature uctuations occur, for instance
precise and programmed machines, valve bore sealing mechanisms in dams,
construction or agricultural machines, machines in boats etc. Meet the very
strict requirements of ISO 6743/4 HV, ISO 11158 HV, Parker Hanifn- Denison
HF-2 and HF-0, DIN 51524/Teil 3 HVLP and EATON (Vickers) M-2950-S.
32
INA Code
ISO Viscosity
Grade
46
Kinematic
Viscosity at
40 C, mm2 /s
46
Viscosity
Index
180
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
pH Value
46
46
9,8
Fire resistant water/glycol type (HFC) hydraulic uids. It is recommended for use
in places where there is a major risk of re. Meets the specications ISO 6743/4
HFC, ISO 12922 and 7th Luxembourg report.
INA Polar HG
INA Polar G
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
32
68
32
68
95
95
High quality oils for slideway lubrication. Specially recommended for combined
hydraulic system slideway lubrication in machine tools. Meet the requirements
of ISO 6743/4 HG, ISO 11158 HG. ISO VG 68 grade placed on the Cincinnati
Machine P-47 list.
150
220
93
93
Oils intended for lubrication of heavily loaded slideway, especially for vertical
lubrication, where faster owing of oil is possible. INA Polar G 220 is especially
recommended for slideway lubrication in heavy duty machine tools such as,
for instance, coordinate drills, carousel machining machines, horizontal planing
machines, gaters. Meet the requirements of ISO 6743/13 L-G and ISO 19378
G-A. ISO VG 220 grade placed on the Cincinnati Machine P-50 list..
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point C
2,1
-38
150
220
circulating oils
INA Code
INA Cirkol
33
ISO Viscosity
Grade
ISO Viscosity
Grade
34
INA Code
INA Cirkol
ISO Viscosity
Grade
100
150
220
320
460
680
800
1000
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point C
100
150
220
320
460
680
800
940
-15
-15
-10
-10
-10
-8
-6
-3
Quality mineral oils containing additives against oxidation and corrosion. Serve
for lubrication by the circulation system, oil splash or oil mist systems, roll
bearings and gear transmissions that are not heavily loaded and are without
shock load. Meet the requirements of ISO 6743/4 HL, ISO 12925-1 and ISO
6743/6 L-CKB. INA Cirkol 100 and 150 meet the ISO 11158 HL specication.
Recommended for gear ank pressures up to 500 N/mm2.
INA Cirkol ML
460
460
-7
Special mineral oil with excellent property of water separation for lubrication,
intended for lubrication of Morgoil roll-neck bearings, gear transmission,
centrifugal pumps and air compressors in mills. Meets the requirements of ISO
6743/4 HH.
100
150
100
150
-22
-21
Quality mineral oils for lubrication of gears operating under moderate loads at
medium and high speed. Specially recommended for railway sliding bearings
in winter exploitation conditions.
Meet the requirements of ISO 6743/4 HL and ISO 11158 HL.
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
150
220
320
460
680
150
220
320
460
680
Pour
Point C
<-40
<-40
-35
-30
-26
INA Code
35
INA Epol SP
ISO Viscosity
Grade
68
100
150
220
320
460
680
800
1000
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point C
68
100
150
220
320
460
680
800
940
-22
-20
-20
-20
-20
-15
-10
-6
-6
460
462
-8
INA Code
NLGI number
Kinematic
Viscosity of
base stock at
40 C, mm2 /s
Dropping
Point C, min
INA Viskoma R
00
0
195
195
165
170
High quality EP oil suitable for use in conditions and working temperatures
ranging from 100 up to 120 C. Can be used for spiral-tapered transmissions
and other transmissions and as hypoid oil for rst factory lling.
Meets the requirements of SAE 140, API GL-5 and ISO 6743/6 CKD.
36
Kinematic
Viscosity at
100 C, mm2/s
Penetration at
25 C, 0,1 mm
75,0
125,0
58,0
325
300
Bitumen based lubricants of high viscosity and high adhesiveness intended for discontinuous
lubrication of open cylindrical or slanted gears, chains and wire cables, at low speeds and
medium loads up to 500 N/mm2 and a working temperature range from 70 to 100 C.
by immersion or mechanically. Recommended for lubrication in construction, mining on
elevators, cranes, cable cars, for power gear transmissions of wheel sets in rail vehicles and
in boats. INA Viskol Fluid 40 contains a solvent for easier application on the lubrication spot,
so it is not necessary to heat it before use. Meet the requirements of ISO 6743-6 L-CKJ.
INA Code
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
INA Graoscon B
SG 00 Ultra
00
500
Dropping
Point C, min
105
105
B
INA Graoscon C
SG 0 Ultra
680
INA Code
37
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
140
Dropping
Point C, min
185
chain lubricants
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
320
110
Synthetic high-temperature oil for lubrication of chains in textile machine drying and
thermo-xing units, chains in the wood processing industry, facilities for paint-spraying and
processing of rubber and plastic. Application temperatures range from -20 to 250 C.
INA Biolancol
86
235
Biologically fast degradable plant-based oil specially developed for chain lubrication of
chainsaws with automatic lubricant feed systems. Possesses the water permit.
110
95
Mineral lubricating oil for chain lubrication of motor-powered and electric saws. Specially
recommended for chain lubrication of STIHL chainsaws.
INA Code
38
INA Code
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
INA Teksol
32
32
95
Mineral based textile machinery lubricating oil, easily washable from cloth or
yarn. Good adhesiveness ensures non-drop properties to eliminate staining of
the knitted material. Recommended for lubrication of different types of knitting
machines. May be used in weaving machines for lubrication of grapples, levers
and handles.
INA Teksol M
22
20
92
Washable textile machinery lubricating oil made from parafn white oil.
Recommended for application in weaving machines for lubrication of grapples,
levers and handles.
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
10
turbine oils
INA Code
INA Turbo
ISO Viscosity
Grade
ISO Viscosity
Grade
32
46
68
32
46
68
98
94
92
High quality turbine mineral oil intended for bearing lubrication of steam,
gas and water turbines. It is also used as hydraulic uid in turbine regulating
systems, gear transmissions and circulatory lubrication of different machines.
Meets the requirements of: DIN 51515-1, BS 489, ISO 8068, ASTM
4304 type I, Alstom HTGD 90117, Siemens TLV 901304/01, General
Electric GEK 32568f, General Electric GEK 101941A.
11
INA Code
B
lubricants and related products
for industrial use
INA Komprina
INA Code
INA VIK
12
Kinematic
Viscosity at
40 C, mm2 /s
Viscosity
Index
32
46
68
100
150
220
320
32
46
68
100
150
220
320
96
95
94
92
91
90
89
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point, C
-40
Mineral oil for screw compressors with good oxidation and thermo stability and
good detergent-dispersant properties, provides protection against corrosion.
Withstands heavy loads and high temperatures.
Oil drain period is one year or 4000 working hours. It is manufactured in
accordance with the internal standard INA N 22-145.
46
44
INA Fungia
39
ISO Viscosity
Grade
ISO Viscosity
Grade
46
68
100
Kinematic
Viscosity at
40 C, mm2 /s
46
68
100
Viscosity
Index
37
36
35
Naphthenic mineral oil with very low pour point, primarily intended for
lubrication of reciprocating and rotary refrigerator compressors, where oil
is exposed to ammonia as refrigerating substance, in moderate volatility
temperature area. Possible application even in refrigeration compressors where
halogenated hydrocarbons are used as refrigerating substances. Meets the
requirements of DIN 51503-1-KAA, BS 2626 and ISO L-DRA specications.
40
13
INA Code
INA Polar
14
ISO Viscosity
Grade
46
100
150
Kinematic
Viscosity at
40 C, mm2 /s
46
100
150
Kinematic
Viscosity at
100 C, mm2 /s
7,0
11,0
14,0
INA Termanol VT
INA Termanol
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Flash Point,
(COC), C
32
32
210
Mineral oil with high thermal and oxidation stability. Used as a heat transfer
medium in closed systems at constant working temperatures up to 320 C.
Meets the requirements of ISO 6743/12 and DIN 51522.
220
Mineral oil with good thermal and oxidation stability intended for heat transfer
in systems in road laying machinery, dryers and in chemical, wood processing
and textile industry and similar closed systems up to 280 C. Meets the
requirements of ISO 6743/12 and DIN 51522.
32
32
INA Code
41
INA Progliterm
15
Toka
smrzavanja
Progliterma i
vode (1:1) C
-35
-35
Vrelite C
165
Synthetic uid for heat transfer and long-term protection from corrosion based on 1,2
propylene-glycol which is less harmful to people and environment. It is recommended for
application in industrial cooling-heating systems, solar heating systems, for building central
heating systems, sports court central heating systems etc. Can be used in closed systems
for heat transfer in food industry where there is no possibility of contact with food or drink.
Before use, the concentrate must be diluted with water.
165
Biodegradable synthetic liquid for heat transfer and long-term protection against corrosion,
based on 1.2-propylene glycol which is non-toxic to humans. Recommended for heatingcooling systems primarily in the food industry, such as breweries, the meat industry, coldstorages, but also for solar heating systems, central heating systems of buildings, sports
grounds and all systems which may come into contact with sanitary water. The concentrate
should be diluted with water before use.
Kinematic
Viscosity at
40 C, mm2 /s
Pour
Point C
9,0
-50
Highest quality special mineral based oil for electric insulation suitable for operation of all
types and sizes of transformers, and it is especially recommended for severe duty tension
selectors in electric locomotive transformers.
Anticorrosive protection in accordance with the newest requirements.
Meets the special criteria for special application from the IEC 60296:2012 standard.
9,1
-48
Oil for electric insulation used in transformers with voltage up to 110 kV. Meets the
requirements of IEC-60296:2012.
42
INA Code
INA Code
Kinematic
Viscosity at
100 C, mm2 /s
Flash Point
(COC), C
170
280
Penetration at
25 C, 0,1 mm
Dropping
Point, C
30 120
70 75
INA SMK 70 is a mass intended for lling and protection of telephone cables. Outstanding
adhesiveness, resistance to humidity and water, electrically insulating and neutral to materials
in cables (copper, aluminum) and polyethylene insulation. Bears the Croatian Quality mark.
Mineral-based oil used for insulation, with the addition of polymer components for lling of
electric cable heads and connectors.
16
process oils
INA Code
INA Gumanol
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Kinematic
Viscosity at
100 C, mm2 /s
460
460
31,0
Mineral based process oil, mostly parafn-based, used in the rubber and
cable manufacturing industry for softening during the manufacturing of special
types of natural rubber.
Naphthenic base process oil for application in glass manufacturing for coating
molds while manufacturing glass products. Can be used for other kinds of
applications that require a naphthenic base process oil of low viscosity.
11
NAPOMENA: INA Maziva d.o.o. proizvode i ostale tipove procesnih ulja koja nisu navedena u ovom katalogu. U sluaju da imete potrebu za drugim tipovima procesnih ulja
molimo Vas da kontaktirate tehniki servis INA Maziva.
17
INA Code
Evaporation
Loss at 140 C,
1 h mass. %
8,0 9,0
90,0
Mixed with water in ratio from 1: 50 to 1:70. Made from waxes, emulsiers and special
additives for protection against corrosion and improvement of die-casting of aluminum alloys,
at die mould temperatures of 180 to 360 C.
Penetration at 25 C, 0,1 mm
130 170
Special lubricating grease compounded with mineral oils, waxes and graphite. It is applied by
hand as special piston lubricant for horizontal and vertical die-casting machines.
18
Kinematic
Viscosity at
20 C, mm2 /s
INA Kalibrol C
INA Kalibrol B
43
pH Value
6,9
Kinematic
Viscosity at
40 C, mm2 /s
Flash Point
(PM), C
2,7
80
Mineral oil of narrow viscosity range for diesel injector calibration and as
engine running-in fuels in accordance with ISO 4113.
98
Mineral oil of narrow viscosity range for Bosch diesel injector system
calibration and as engine running-in fuels.
44
INA Code
Kinematic
Viscosity at
40 C, mm2 /s
Flash Point
(COC), C
INA Instrumentol
21,0
190
Highest quality high parafnic oil with additives. Widely used in industry, intended for
lubrication of all kinds of measuring and other precise instruments, household appliances,
sewing machines, and ofce appliances. Can be used in the textile industry for knitting and
sewing machines in places where special washing properties are not specied.
INA Oplatol 16
16,0
190
Oil used to facilitate concrete separation from the moulds in the building industry. Suitable for
steel and water resistant plywood plates.
INA Oplatol 5
4,5
115
Oil used to facilitate concrete separation from the moulds in the building industry. Suitable for
steel and water resistant plywood plates. Due to low viscosity it can be applied with a brush
and hand sprayers.
270
Biodegradable emulsiable uid for lubrication and cooling used in places where the lubricant
may come into contact with the environment. It is used for lubrication and cooling of large
wood-cutting saws (gaters), and may also be used for spraying rollers, metal surfaces and
other parts which come into contact with asphalt. In the glass industry scissors used for
cutting and shaping glass objects may be lubricated. It is delivered as a concentrate, when
mixed with water it creates a stabile milk emulsion in the ratio from 3 to 50% depending on
the areas of application.
INA Biol C 40
40,0
metalworking oils
and uids
47
Kinematic
Viscosity at
40 C, mm2 /s
Copper
Corrosion at
100 C, 3 h
1b
Mineral inactive neat cutting oil containing fatty components for honing operations on
iron and yellow metals and other machining requiring a very low viscosity cutting oil.
Classied as ISO 6743/7 L-MHC, DIN 51385 SN.
30
1b
Special formulation, universal mineral parafn-based inactive neat cutting oil for painted
metal cutting operations with machine tool gear and bearing lubrication, can be used
simultaneously as a hydraulic uid. Classied as ISO 6743/7 L-MHC, DIN 51385 SN.
1b
Mineral inactive neat cutting oil with a higher fatty component content. Used for cutting
low-hardness steels and yellow metals which tend to produce built up edges on cutting
tools and where a special quality surface nish is required. Classied as ISO 6743/7
L-MHC, DIN 51385 SN.
1b
1b
Mineral inactive neat cutting oils for operation in machines occasionally cutting steels of
low to medium hardness and yellow metals. Suitable for thread cutting, automatics and
gear cutting, especially when high quality nished surface is required. The application
of INA Rezanol NEP 20 BKK guarantees great results with hobbing and nal milling of
gears in machines manufactured by Gleason, Konvoid and Reishouer. Classied as ISO
6743/7 L-MHC, DIN 51385 SN.
1b
Mineral inactive neat cutting oil containing a higher fatty component and additive content
for cutting yellow metals. Used for prole grinding of tool and high-speed and stainless
steels, for prole grinding and grinding gears in Reishauer grinders. Classied as ISO
6743/7 L-MHE, DIN 51385 SN.
INA Rezanol NM
22 BKK**
22
20
40
37
48
INA Code
Kinematic
Viscosity at
40 C, mm2 /s
15
Copper
Corrosion at
100 C, 3 h
1b
Inactive greased multipurpose cutting oil for machining yellow metals and carbon
and low-carbon steels. Especially suitable for yellow metal machining on automatics,
deep drilling, machining, and thread rolling. Particularly recommended for small parts
machining demanding very high surface nish such as writing instruments manufacture.
Classied as ISO 6743/7 L-MHE, DIN 51385 SN.
Highly efcient oil for medium and heavy duty conditions and tough metals. Especially
recommended for application on automatics because it lubricates the entire machine,
including hydraulic systems, besides having good machining properties. Classied as SO
6743/7 L-MHE, DIN 51385 SN, DIN 51524/2 HLP.
32
1b
10
20
4c
4c
Mineral active oils with special additives and an increased fatty component content
for deep drilling, prole grinding, nal machining of steel and cast metal where lower
viscosity is required. Classied as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol A HD 17
BKK
17
4c
Highly efcient oil for broaching and deep drilling of alloyed steels of lowest
machinability. It is also applied for threading and thread rolling, gear machining, cold
forging as well as for other demanding machining procedures. It is also suitable for
cutting operations using the minimal lubrication procedure (MQL). Classied as ISO
6743/7 L-MHF, DIN 51385 SN.
INA Rezanol A HD 43
BKK
43
4c
Highly efcient oil for broaching and thread cutting on alloyed steels with lowest
machinability. Suitable for drawing, stamping and cold forging operations. Classied as
ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol AM HD
28 BKK**
28
4c
Mineral based highly efcient active oil for broaching, threading and thread rolling,
gear machining as well as for other operations in machining steels of low machinability.
Classied as ISO 6743/7 L-MHF, DIN 51385 SN.
33
3a
Highly efcient oil for high speed heavy duty broaching during the machining of steels
with low machinability and for operations of steel punching and machining stainless
steels. Classied as ISO 6743/7 L-MHF, DIN 51385 SN.
Copper
Corrosion at
100 C, 3 h
INA Rezanol AM
100 BKK
100
4a
Highly efcient, multifunctional active oil for heavy duty steel machining using metal-forming
operations on the basis of deforming and particle removal, such as cutting, thread rolling,
prole reducing, stamping, forging etc. Classied as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol AM HD
130 HK BKK
130
4c
Highly efcient mineral oil for cold forging and rolling screws. It can be used for other heavy
operations requiring high surface nish on tough low machinability steels. Classied as ISO
6743/7 L-MHF, DIN 51385 SN.
1b
Inactive oil used for machining yellow metals, primarily aluminum, by particle removal and
deforming. It evaporates fast, so the surface remains shiny and dry, and there is no stickiness
during blasting. It can be used for machining other materials, such as wood. Classied as ISO
6743/7 L-MHB, DIN 51385 SN.
INA Code
49
1,7
INA Sint B
pH Value
Cast Iron Corrosion of
5% Emulsion/Solution 2% Emulsion/Solution
8,0 9,0
0/0 0/
50
INA Code
pH Value
Cast Iron Corrosion of
5% Emulsion/Solution 2% Emulsion/Solution
INA Sint A
8,0 9,0
0/0 0/
INA Bioal E
8,5 9,5
0/0 0/
0/0 0/
Emulsiable uid for machining metal at high speed and pressure. Creates
biologically stable emulsions when mixed with water. Due to high stability and
low foaming it is especially applicable in modern CNC machines, in high-speed
operations, in cooling through tools as well as in conventional machining units.
It is recommended for machining iron materials in different operations, from
grinding to deep grinding, and it can also be applied in machining yellow
metals. Classied as ISO 6743/7 L MAF, DIN 51385 SEM.
0/0 0/
Emulsiable uid that creates a stable milky emulsion when mixed with water.
Used in machining operations on the basis of particle removal as well as
deforming, for machining steel, iron and yellow metals, in grinding, machining
and in automatics. It can be applied as a hydraulic uid. Classied as ISO
6743/7 L-MAB, DIN 51385 SEM.
INA BU 7
8,8 9,3
8,7 9,5
INA BU Stabilizator
Kinematic
Viscosity at
40 C, mm2 /s
Density at
20 C, g/
cm
pH Value
1%
3%
solution solution
1,150
10
C
INA PER
INA Deemulzin
80,0
1,062
1,165
7,5
6,9
INA Kalenol
51
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Flash Point
(COC), C
22
32
68
100
22
32
68
100
180
220
240
250
High-quality, widely used mineral oils with very good oxidation stability.
Used for quenching of tools and construction parts from non-alloy and lowalloy steels. Classied as ISO 6743/14 L-UH, DIN 51385 SN.
52
INA Code
INA Kalenol S 22
INA Kalenol S 32**
INA Kalenol S 68**
ISO Viscosity
Grade
Kinematic
Viscosity at
40 C, mm2 /s
Flash Point
(COC), C
22
32
68
22
32
68
180
220
240
Quenching oils rinsable with water. Applied during heat treatment of parts
made from low-alloy steels and standard carbon non-alloy steels. Quenched
objects are easily rinsed with water. Easily miscible with water, they are used
for inductive quenching in the form of an emulsion. Classied as ISO 6743/14
L-UH, DIN 51385 SEM.
INA Ulje za
elektroeroziju 2**
Kinematic
Viscosity at
20 C, mm2 /s
Flash Point
(PM), C
1,7
75
Very low viscosity, low volatility oil for nest spark-erosion metalworking operations
demanding narrow tolerance and high surface nish. Recommended where good rinsing and
low electrode wear is required. Classied as ISO 6743/7 L-MHA, DIN 51385 SN.
INA Ulje za
elektroeroziju 3
3,5
100
Universal oil dielectric uid, with low volatility, used for spark-erosion metalworking
operations. Electrical properties suitable for a wide range of applications in electric spark
erosion, for ne and coarse erosion metalworking. Classied as ISO 6743/7 L-MHA,
DIN 51385 SN.
INA Ulje za
elektroeroziju 7**
6,0
125
Highest viscosity with lowest volatility electric spark erosion oil in comparison with other
grades. Especially recommended for severe spark erosion metalworking where more removal
is required during metalworking. Classied as ISO 6743/7 L-MHA, DIN 51385 SN.
temporary
corrosion
preventives
INA Antoksin**
INA Code
Kinematic
Protective Film
Viscosity at
Thickness, mm
40 C, mm2 /s
32
Kinematic
Viscosity at
40 C, mm2 /s
Mineral based oil with water removal properties for temporary protection from corrosion
of metal surfaces of parts, ne mechanisms, metal half-products (sheets, strips, proles)
and nished products (springs, pressings, screws etc.). It is applied by spraying, dipping or
coating with a brush. The protective lm is oily. Indoor protection for up to 9 months, outdoor
undercover protection up to 6 months.
0,005
30
Oil intended for lubrication and temporary protection from corrosion in all
kinds of small arms and artillery arms and equipment. Possesses water
removal properties and does not act aggressively in contact with yellow metals.
Protection from corrosion in humid and salt water environment. Indoor protection
for up to 12 months, outdoor undercover protection for up to 8 months.
Meets the requirements of MIL-C-22235A. The protective lm is oily.
temporary corrosion
preventives
55
INA Asol U
INA Asol S
37
6,4
Special small arms cleaner and temporary corrosion preventive for everyday
hunting, infantry or artillery arms maintenance. Removes harmful gunpowder
combustion products. Has water removal properties and ngerprint removing
properties. Meets the requirements of MIL-PRF-372D and MIL-C-15074E
specications.
56
temporary corrosion
preventives
INA Code
Corrosion Protection
Salt Water Cabinet,
days, min
12
Protective Film
Thickness, mm
0,004
INA Antoksin
Aqua 10**
INA Antoksin
Aqua 15**
INA Antoksin
Aqua 20**
Corrosion Protection
Humidity Cabinet,
days, min
Protective Film
Thickness, m
0,9
10
1,2
20
1,7
Water solution based uids for temporary protection of metal from corrosion,
leaving a hydrophobic, very thin and slightly oily protective lm after water
evaporates. Intended for protection of metal parts, coils, sheets and nished
products in indoor storage. Especially suitable for protection of objects made
from cold rolled steel, galvanized steel and aluminum. The protective lm
dries fast and is removed easily using the usual diluted alkaline degreasers.
Besides having good anticorrosive properties, they are not ammable, are less
polluting and do not pose a threat to the health of people using them.
technical cleaning
products
Density at
20 C, g/cm3
Flash
Point, C
0,780
64
For outside cleaning of tankers from oil fuel and bitumen, and for cold degreasing of engines,
machines, tools and sheets. Does not corrode steel, varnishes and sealants. It is used
undiluted.
64
For cold cleaning of heavy pollution by mineral greases and bitumen, burnt and severely
degraded substances on metal surfaces. Because it contains natural terpenes with excellent
solvent properties and has proved to be a good substitute for products containing chlorinated
hydrocarbons. Does not corrode steel. It is used undiluted and it is rinsed with water.
64
For cleaning electro-motors, electrical circuits, switches and other electric equipment. It is
used for degreasing sheets, stainless steel and other metal surfaces when the presence of
water is not allowed and when faster evaporation and drying is required. It is also used in
baths for degreasing. It is used undiluted and possesses the water permit.
0,780
59
0,850
Density at
20 C, g/cm3
pH Value,
10% solution
1,070
9,1
For cold removal of oil and grease dirt from vehicles, sheets, pipelines and other parts during
workshop works. Does not corrode steel, varnishes, sealants or glass surfaces. It is used
diluted with water, depending on the level of pollution, up to 1:10 ratio.
60
INA Code
INA Code
INA Code
Density at
20 C, g/cm3
pH Value,
1% solution
1,7
Acid product for outside cleaning of rail wagons, trams and buses, containers and tankers,
from organic and inorganic pollution. It is very efcient in removing sediments dissolved
in acids (carbonates, oxides, etc.). Does not corrode steel, varnishes, sealants not glass
surfaces. Not suitable for surfaces sensitive to acids, such as natural stone, ceramics, etc. It
is used diluted with water depending on the level of pollution, up to 1:10 ratio.
1,120
12
Alkaline product for outside cleaning of rail wagons, buses, car engines, boat fuel tanks as
well as oors polluted with degraded oil. Does not corrode steel, varnishes or sealants. Longterm action on glass and yellow metals is not recommended. It is used diluted with water
depending on the level of pollution, up to 1:5 ratio.
Density at
20 C, g/cm3
pH Value
1,080
9,1
For cold cleaning of organic pollution in combination with soot, pigments and bitumen. It
is used for cleaning engine parts, sheets, industrial oors, building facades and outside
facilities of petrol stations. Does not corrode metal surfaces, varnishes, seals, glass and other
materials. It is used diluted with water depending on the level of pollution, up to 1:100 ratio.
Density at
20 C, g/cm3
pH Value,
10% solution
1,230
1,080
10,5
For warm cleaning in industry and workshops, intended for cleaning processing equipment,
heating oil tanks, engines, machines and as a substitute for chlorinated hydrocarbon
baths. Does not corrode steel, varnishes or sealants. It is not suitable for metals that are
not resistant to alkaline substances. It is used diluted with water depending on the level of
pollution and work mode up to 1:50 ratio.
INA Code
61
Density at
20 C, g/cm3
1,190
pH Value,
1% solution
1,65
For removal of lime scale in pipelines and equipment. Does not corrode metal surfaces,
steel or sealants. It is not suitable for acid sensitive surfaces such as natural stone, marble,
ceramics etc. It is used undiluted or diluted with water depending on the amount of lime
scale, up to 1:20 ratio.
INA Code
65
INA LIS
INA EKS HD
NLGI
number
1
2
3
0
1
2
3
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
80
115
130
68
68
68
68
Dropping
Point, C
190
195
200
85
90
95
98
66
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
Dropping
Point, C
240
248
252
Lithium complex mineral based EP greases are suitable for plain and rolling
bearings in machines and for agricultural, construction and mining machinery.
They withstand heavy and shock loads, vibrations, and they are water
resistant. INA Lipleks S EP 2 is especially suitable for long term lubrication of
wheel bearings in road and railway vehicles.
NLGI grade 1 can be applied from -30 to 120 C and it is classied as ISO
L-XCCHB 1 and DIN 51825 KP 1 K -30.
NLGI grade 2 can be applied from -30 to 130 C, for a brief period up to 140
C and it is classied as ISO L-XCDHB 2 and DIN 51825 KP 2 N -30.
NLGI grade 3 can be applied from -20 to 140 C, for a brief period even up to
150 C and it is classied as ISO-XBDHB 3 and DIN 51825 KP 3 N -20.
190
197
F
INA Lipleks S EP
INA LIS EP
1
2
3
1
2
150
150
150
150
150
INA Code
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
Dropping
Point, C
175
190
INA LIS EP S
115
190
195
Lithium mineral based EP grease with the addition of MoS2. It is used for
lubrication of all types of bearings, joints and slideways exposed to high shock
loads and where more reliable lubrication is required. Application temperature
from -25 to 130 C, and for a brief period up to 150 C.
Classied as ISO L-XCDHB 2 and DIN 51825 KPF 2 N -25.
100
500
F
INA GKS
67
68
102
Mineral based grease thickened with modied clay with the addition of
MoS2. Used for lubrication of plain and rolling bearings at higher loads and
temperature up to 160 C, and for low speed plain bearings up to 200 C.
Classied as ISO L-XBEDA 1 and DIN 51825 KF 1 P -20.
Calcium mineral grease with colloid graphite for rolling bearings and joints of
construction, agricultural and mining machines at lower speeds and higher
pressures, for heavily worn out bearings, for elevator guides, chains, chain
drives, wire cables and low-load gears.
Application temperature range from -20 to 70 C. Classied as ISO L-XBAHA
3 i DIN 51825 KF 3 C -20.
68
INA Code
INA Bapleks T
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
Dropping
Point, C
46
200
260
245
Barium complex mineral based EP grease used for lubrication of all types of
bearings that come into contact with moisture, water or hot water. Ensures
good protection from corrosion in salt water.
Meets the requirements of Fiat 55590. Application temperature from -25 to
130 C. Classied as ISO L-XBCHB 2 and DIN 51825 KP 2 K -25.
510
180
INA LIS EP 00
69
INA LIS CS EP
NLGI
number
00
00
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
46
46
Dropping
Point, C
175
180
70
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
Dropping
Point,C
168
200
F
INA Bioma EP**
INA Code
00
2
60
125
Kinematic Viscosity of
Base Stock at 40 C,
mm2 /s
Flow Time at 20 C
(Ford), s
60
140
71
INA Code
Needle Penetration
Dropping
Point, C
0,1 mm
16
21
27
32
38
16 20
20 30
30 40
< 80
< 200
58 62
NLGI
number
Kinematic
Viscosity of
Base Stock at
40 C, mm2 /s
Dropping
Point, C
68
100
72
other
products
74
INA Code
other products
G
75
Total Hardness nj
< 0,1
Electrical
Conductivity, S/cm
<8
index
AdBlue ........................................ 27
INA 2 taktol ST Plus......................16
INA 2T Scooter .............................15
INA Actinia B 50 ...........................16
INA Agrina 10W-30 ..................... 22
INA Agrina 10W-40 ..................... 22
INA Amortizol 377 ....................... 23
INA Amortizol HPS Plus ............... 23
INA Antiriz ELC 40 ..................... 26
INA Antifriz 40 ............................. 26
INA Antifriz AL 40 ....................... 26
INA Antifriz AL Super ................... 25
INA Antifriz BS 40 ....................... 26
INA Antifriz BS Super ................... 25
INA Antifriz Super ........................ 25
INA Antoksin 32 .......................... 55
INA Antoksin Aqua 10 .................. 56
INA Antoksin Aqua 15 .................. 56
INA Antoksin Aqua 20.................. 56
INA Antoksin Fluid M3 ................. 56
INA Asol S ................................... 55
INA Asol U ................................... 55
INA ATF DX IID ............................ 20
INA ATF DX III .............................. 20
INA ATF Extra .............................. 20
INA ATF Super ............................. 20
INA ATF TASA ............................. 20
INA Autoglas ............................... 27
INA Autoglas E30 ........................ 27
INA Bapleks T2 ........................... 68
INA Bazna klizna mast .................71
INA Bentona MOS 1..................... 67
INA Bioal E .................................. 50
INA Biol C 40............................. 44