You are on page 1of 20

Fourth International Conference on

Structural Stability and Dynamics


http://www.tamu.edu/acml/icssd2012

CONFERENCE PROGRAM
ICCSD 2012
4-6 January 2012
Malaviya National Institute of Technology,
J.L.N. Marg, Jaipur, Rajasthan, 302 017, India

General Chairman
J.N. Reddy

Texas A&M University, College Station

General Co-Chair
M.K. Shrimali

Malaviya National Institute of Technology

Department of Structural Engineering


Malaviya National Institute of Technology, Jaipur, India

WELCOME MESSAGE
Following the success of the First, Second and Third International Conferences on Structural
Stability and Dynamics held in 2000 (Taipei), 2002 (Singapore), 2005 (Orlando, USA), this fourth
Conference continues to provide an international forum for presentation of recent advances on
various aspects of theories, analyses, experiments and designs related to structural stability and
dynamics. In particular, it will reflect the state-of-the-art of the computational methods, software
development, networking technologies, new and advanced structural materials and engineering
applications characterized by stability and dynamics features.
We are so pleased to see that the conference has attracted so many participants from so many
institutions and from 15 countries. There are about 100 papers that will be presented in the
conference. The papers cover a broad range of topics that include structural dynamics,
structural stability, computational and experimental methods, inverse problems, smart
materials and structures, earthquake engineering, and nano & bio mechanics. Selected papers
from those presented at the conference will be invited to be peer-reviewed for publication in
International Journal of Structural Stability & Dynamics, Mechanics of Advanced Materials and
Structures, and International Journal of Computational Methods in Engineering Science and Mechanics.
We sincerely hope that you will find the conference fruitful and as enjoyable as it promises to be,
and that you will take back with you valuable insights on the topics covered at this conference as
well as fond memories of these three days in the company of fellow researchers and engineers.
We are very delighted to see you here and we thank you all for your support and participation.
General Chairman:
J.N. Reddy
Texas A&M University, College Station
General Co-Chairman:
M.K. Shrimali
Malaviya National Institute of Technology

ICSSD 2012

TABLE OF CONTENTS

Welcome Message

ICSSD Organizing Committee

ICSSD International Scientific Committee

Technical Program

General Information

18

- Registration

18

- Payment and Remittance


- Instructions for Speakers

18
18

- Instructions for Session Chairpersons


- Coffee Breaks & Lunches

19
19

- Conference Banquet

19

- Conference Proceedings

19

- Venue and Hotel Accommodation

19

- Travel Visa Information

20

- Transportation

20

ICSSD 2012

ICCSD ORGANIZING COMMITTEE


Patron

I.K. Bhat, Malaviya National Institute of Technology, Jaipur, India

Chairman

J. N. Reddy, Texas A&M University, College Station, Texas

Co-Chairman

M. K. Shrimali, Malaviya National Institute of Technology, Jaipur, India

Technical Committee
Co-Chairmen

J. N. Reddy, Texas A&M University


M. K. Shrimali, Malaviya National Institute of Technology

Treasurer

S.D. Bharti, Malaviya National Institute of Technology

ICMMS INTERNATIONAL SCIENTIFIC COMMITTEE


M. Amabili, McGill University, Canada
T.M. Atanackovic, University of Novi Sad Trg, Serbia and Montenegro
S.V. Bakre, VNIT Nagpur, India
Z.P. Bazant, Northwestern University, USA
M.A. Bradford, The University of New South Wales, Australia
D. Bruno, University of Calabria, Italy
D. Camotim, Instituto Superior Tecnico, Portugal
S.L. Chan, The Hong Kong Polytechnic University, Hong Kong
P.K. Datta, IIT Kharagpur, India
T.K. Datta, IIT Delhi, India
S. M. Dumne, Govt. Poly Maharashtra, India
B. K. Dutta, BARC, India
M. Eisenberger, TechnionIsrael Institute of Technology, Israel
I. Elishakoff, Florida Atlantic University, USA
A. Ferreira, University of Porto, Portugal
B. Gopalakrishnan, Indian Institute of Science, India
A. Grimaldi, University of Rome II, Italy
R.P.S. Han, Peking University, China
J.H. Huang, Feng Chai university, Taiwan
H. Irschik, Johannes-Kepler University of Linz, Austria
S. Jain, IIT Gandhinagar, India
R.S. Jangid, IIT Bombay, India
W. Ju, University of California Los Angeles, USA
W. Kanok-Nukulchai, Asian Institute of Technology, Thailand
T. Kant, IIT Bombay, India
R. Krishnakumar, IIT-Madras, India
A.Y.T. Leung, City University of Hong Kong, Hong Kong
R. Levy, Ben-Gurion University of the Negev, Israel
K.M. Liew, City University of Hong Kong, Hong Kong
Y.Q. Long, Tsinghua University, China

C. W. Lim, City University of Hong Kong, Hong Kong


G. R. Liu, University of Cincinnati, USA
F. Maceri, University of Rome II, Italy
B. K. Maheshwari, IIT Roorkee, India
V. Matsagar, IIT Delhi, India
C. M. Mota Soares, University of Lisbon, Portugal
R. Motro, Universit Montpellier II, France
C.V.R. Murthy, IIT Madras, India
D.A. Nethercot, Imperial College of Science, Technology & Medicine, UK
J.B. Obrebski, Warsaw University of Technology, Poland
M. Papadrakakis, National Technical University of Athens, Greece
E. Rank, Technische Universitt Mnchen, Germany
H.A. Rasheed, Kansas State University, USA
M. Ramulu, Universyt of Washington, USA
S. Roy, University of Alabama, USA
E. Sacco, University of Cassino, Italy
A. Samartn, Technical University of Madrid, Spain
P. Shah, KL University, India
N.E. Shanmugam, Universiti Kebangsaan Malaysia, Malaysia
A. Sharma, University of Jodhpur, India
H.S. Shen, Shanghai Jiao Tong University, China
K.K. Shukla, NIT Allahabad, India
A. Srinivasa, Texas A&M University, USA
S. Srinivasan, IIT Madras, India
Y. Sugiyama, Ryukoku University, Japan
L. Sun, Tongji University, China
B. Suneja, RTU Kota, India
K. Surana, University of Kansas, USA
R. Talreja, Texas A&M University, USA
L. Tang, South China University of Technology, China
T. Tarnai, Budapest University of Technology and Economics, Hungary
T. Utsunomiya, Kyoto University, Japan
N.S. Vyas, IIT Kanpur, India
H. Xiang, Tongji University, China
Y. Xiang, University of Western Sydney, Australia
B. Yang, University of Southern California, USA
J. Ye, University of Leeds, UK
C.B. Yun, Korea Advanced Institute of Science and Technology, Korea
X.L. Zhao, Monash University, Australia
Advisors:

Y.B. Yang, National Taiwan University


C.M. Wang, National University of Singapore

TECHNICAL PROGRAM AT A GLANCE


Wednesday, 4-Jan, 2012

Thursday, 5-Jan, 2012


MNIT, Jaipur

Friday, 6-Jan, 2012

08:30 -09:00 Opening Ceremony MNIT, Jaipur

09:30 11:10,

09:00 10:30,

MNIT, Jaipur

09:00 10:30

Plenary Lecture 5: KS Surana, Chair: JN Reddy

Plenary Lecture 1: YB Yang, Chair: S Kitipornchai

Plenary Lecture 6: T Kant, Chairs: RS Jangid and GR Reddy Plenary Lecture 10:NS Vyas, Chairs: JS Rao and SP Harsha

Plenary Lecture 9: RS Jangid, Chairs: GR Reddy and MK Shrimali

Plenary Lecture 2: TK Datta, Chairs: RS Jangid and T Kant

Tuesday 3-Jan, 2012

Registration

10:30 10:45 Coffee Break

11:00 11:15 Coffee Break

10:45 13:30

11:15 12:45

Plenary Lecture 3: JS Rao, Chair: NS Vyas and IK Bhat

Plenary Lecture 7: JN Reddy, Chair: CM Wang

Plenary Lecture 4: CM Wang, Chair: YB Yang

Plenary Lecture 8: CVR Murty, Chair: MK Shrimali

(1)

10:45 13:00, MNIT, Lecture Halls

13:30 -14:30 Lunch Break

12:45 -14:00 Lunch Break

14:30 17:30, MNIT, Lecture Halls

14:00 17:30, MNIT, Lecture Halls

15:45 16:00 Coffee Break

15:45 16:00 Coffee Break

Concurrent Sessions:

Concurrent Sessions:

Advanced Computational Methods-I

(1)

10:30 10:45 Coffee Break

Advanced Computational Methods-II

Concurrent Sessions:
(1)

Earthquakes, Winds and Impacts-II

Co-Chairs: GD Ramtekkar and Vasant Matsagar


(2)

Earthquakes, Winds and Impacts-III

Co-Chairs: Ayman A Seleemah and SD Bharti


(3)

Analysis of Composites and RC Structures-II

Co-Chairs: R Hamid and I Mishra

Co-Chairs: KS Surana and Dinar Camotim

Co-Chairs: K Boo-Cheong and IV Singh

(4)

(2)

(2)

Co-Chairs: AV Bhaskararao and SV Bakre

Analysis of Composites and RC Structures-I

Co-Chairs: R Degenhardt and KK Shukla


(3)

Earthquakes, Winds and Impacts-I

Co-Chairs: GR Reddy and Jamil Abdo

Experimental Mechanics and Measurement Techniques (3)

Co-Chairs: G Subbarayan and SP Harsha

(4)

(4)

Co-Chairs: Jamil Abdo and SP Joshi

13:00 14:30 Lunch Break

Fatigue, Damage and Failure of Materials-II

Co-Chairs: BK Maheshwari and M Ramji


Fatigue, Damage and Failure of Materials-I

Structural Health Monitoring and Control Methods

Modeling of Complex Materials and Structures

Conference Ends

Co-Chairs: NE Shanmugam and Dinar Camotim


19:30 22:00
CONFERENCE BANQUET
Venue: TBD

ICSSD 2012

TECHNICAL PROGRAM
Tuesday, 3rdth January 2012
Registration: 1700 1800

MORNING of Wednesday, 4th January 2012


Breakfast

08:30-09:15

Opening Ceremony

09:30-10:30

Coffee Break

10:30-10:45

Breakfast and Registration

Plenary Lecture I
10:45-11:30
Chair: S Kittipornchai
New Buckling Theory for Curved Beams Derived from Rigid Body and Force Equilibrium
Considerations,
YB Yang, National Yunlin University of Science and Technology, Taiwan
Plenary Lecture II
10:30-12:15
Chair: RS Jangid and T Kant
A Brief Review of Stochastic Control of Structures,
TK Datta, Indian Institute of Technology Delhi, India
Plenary Lecture III
12:15 -12:50
Chair: NS Vyas and IK Bhat
Optimization for Design of Composite Aircraft Structures,
JS Rao, Altair Engineering, Bangalore
Plenary Lecture IV
12:50 -13:30
Chair: YB Yang
Modified Couple Stress Theories of Functionally Graded Shear Deformation Beams and Plates,
CM Wang, National University of Singapore, Singapore
Lunch & Break:

13:30 14:30

AFTERNOON of Wednesday, 4th January 2012

ICSSD 2012

SESSION (1) Advanced Computational Methods-I

15:00-

Co-Chairs: KS Surana and Dinar Camotinm


h,p,k Finite Element Processes for Linear and Non-Linear BVPs and IVPs in Solid and Structural
Mechanics
KS Surana and JN Reddy (Key Note)
Use of External Node in Development of Beam Element

15:15

Mahesh Varma and RP Shimpi (invited)

15:15-

Buckling Analysis of Thin-Walled Steel Structural Systems Using Generalized Beam Theory (GBT)

15:30

Cilmar Basaglia and Dinar Camotim (invited)

15:30-

Viscoelastic Analysis of Beams Using a General Third-Order Theory with The Von Krmn

15:45

Nonlinear Strains

14:3015:00

Venkat Vallala, Annie Ruimi, and JN Reddy


Coffee Break: 15:45-16:00

16:00-

Through-thickness Shearing Effects on Post-buckling Behavior of Composite Laminated Plates

16:15

under End Shortening and Pressure Loading, Using Finite Strip Method
MH Sherafat, SAM Ghannadpour and HR Ovesy
A Mesh Independent Material Mapping Procedure FOR QCT-Based, Continuum Finite Element
Analyses of Vertebrae
Ginu Unnikrishnan and Elise Morgan
Buckling of Laminated Composite Plates Using Meshless Method Based on Various Radial Basis

16:1516:30
16:3016:45

Functions
Sandeep Singh, Jeeoot Singh and KK Shukla
Thermal Buckling Analysis of Laminated Composite Plates Using RHSDT
SK Singh and A Chakrabarti

16:4517:00

Comparitive Study of Indian Hot- Rolled Parallel Flange I - Beam Sections with Respect to Tapered
Flange I Beam Sections
Kulkarni Swati Ajay and Vesmawala Gaurang R
Behavior of Angle Compression Members: A State-of-art Review
Jyoti V Bhilawe and LM Gupta

17:0017:15
17:1517:30

SESSION (2) Analysis of Composites and RC Structures-I


Co-Chairs: R Degenhardt and KK Shukla
14:3015:00

Challenges to Design Imperfection Sensitive Composite Launcher Structures


R Degenhardt, R Zimmermann, A Kling and D Wilckens (Key Note)

15:00

Study of Effect of Actuator Position on Piezoelectric Cantilever by Modal And Harmonic Analysis

15:15

Abhay M Khalatkar and VK Gupta

15:15

Study of Free Vibration Respons of Laminated Composite Plates with Cut-outs

15:30

Hemalata Jena, Mihir Ku Pandit and Arun Pradhan

15:30-

Moment Distribution around Circular/Elliptical/ Triangular Cutouts in Infinite Symmetric

15:45

Laminated plate

Dharmendra S Sharma and Nirav P Patel


Coffee Break: 15:45-16:00

16:00-

Nonlinear Dynamic Analysis of Laminated Composite Skew Plates

16:30

A K Upadhyay and KK Shukla (Key Note)

ICSSD 2012

Prediction of the Initiation of Delamination Propagation in Composite Laminates Using Layerwise


FSDT
N Kharghani, M Kharazi and HR Ovesy

16:3016:45

Free Vibration of Cross-Ply and Angle-Ply Laminated Plates Using Trigonometric Shear
Deformation Theory
YM Ghugal, PK Deshpande and RL Wankhade
Seismic Hazard Survival and Fragility of Masonry Infilled Reinforced Concrete Framed Building
A Sharma, P Jain, RK Khare, DM Patil and A Melani

16:4517:00
17:0017:15

Impact Induced Non-Linear Stress and Strain Study on RC slab


RK Singh and Neha Trivedi

17:1517:30
17:30-

A Method For Preliminary Estimate of Vulnerability of Rural Houses to Cyclonic Wind


Pradeep K Goyal and TK Datta

17:45

SESSION (3) Experimental Mechanics and Measurement Techniques


Co-Chairs: BK Maheshwari and M Ramji
14:3015:00

Three Dimensional Seismic SSI Analysis using Coupled FEM/SBFEM Approach


NM Syed and BK Maheshwari (Key Note)

15:00-

Experimental and Numerical Evaluation of Stress Intensity Factors for Interacting Parallel Edge

15:15

Cracked Panel

15:15-

Experimental Study on Energy Dissipation with Emphasis on Size Effect for Plain and Retrofitted

15:30

Beam-Column Joint Under Cyclic Loading

Vikrant V Veerkar and M Ramji

M Choudhury, A Dutta and SK Deb


15:30-

Analytical and Experimental Study of Buckling of Plates Considering In-plane Boundary

15:45

Conditions

K Prajapat, S Ray-Chaudhuri and A Kumar


Coffee Break: 15:45-16:00

16:00-

Experimental and Numerical Evaluation of SIF for a Bi-material Interface Crack Under Pure

16:15

Bending

16:15-

Application of Multiple Tuned Mass Dampers in Controlling Structural vibration

16:30

Vinay Gehlot, Ajay Sharma, MK Shrimali and SD Bharti

16:30-

Dynamic Soil-Structure Interaction Effects In Raft Moments of Tall Reinforced Concrete Industrial

16:45

Chimneys
Jisha SV, BR Jayalekshmi and R Shivashankar
A new ground motion attenuation relation for the Northeastern region of India (NERI)
Tauhidur Rahman and AM Choudhary

16:4517:00
17:00-

Rahul N Pai and M Ramji

17:15

Study of Liquefaction Behavior Using FLAC


Rajiv Chauhan, Satyendra Mittal and Anil Swarup

17:15-

Seismic Performance of Base-Isolated Building With Variable Semiactive Visco-Elastic Dampers

17:30

Subjected To Near-Field Earthquakes

Ajay Sharma

ICSSD 2012

SESSION (4) Fatigue, Damage and Failure of Materials-I


Co-Chairs: Jamil Abdo and SP Joshi
Stochastic Failure Mechanics of Soft, Fibrous Networks
AS Abhilash, Prashant K Purohit and Shailendra P Joshi (Key Note)

14:3015:00
15:00-

Mass Reduction of Railway Wheel Using Response Surface Method Considering Fatigue Life and

15:15

Wheel Dimension

15:15-

Effect of Nano Silica Addition on the Properties of Ultra High Concrete

15:30

Mohamad Khafaga, Waleed S Elsayed, Mohamed A Sherif and Hassan H Hassan

15:30
15:45

Strengthening and Repair of Reinforcement Concrete Slab-Column Connection Subjected to


Punching Shear Using (CFRP-GFRP-STEEL) Stirrups
G Ismail, AH Abdel-Karrem, A Debaiky and MHA Makhlouf
Lunch Break: 15:45-16:00

16:00

Effect of Delamination on Free Vibration of Laminated Beams

16:15

GS Ramtekkar and YM Desai

16:15
16:30

Seismic Response of Pounding and Impact Susceptible Buildings


SN Tande and AS Bargir

16:30

A Neural Network Model for Damage Detection of EL-FERDAN Bridge

16:45

Ayman A Seleemah, Ashraf M Abou-Rayan and M Samy

16:45

Finite Element Analysis of Thin Membrane Structure

17:00

SC Gajbhiye, SH Upadhyay and SP Harsha

17:00-

Parametric Instability of Square Laminated Plates in Hygrothermal Environment

17:15

Manoj Kumar Rath and Shishir Kumar Sahu

17:15-

Manual Shape and Size Optimization of Inverted Umbrella Reinforced Concrete Shell Structures

17:30

Magdy A Tayel and Hesham A Othman

10

Nagvendra K Kanoje, SC Sharma, Sanjay Upadhyaya and SP Harsha

ICSSD 2012

TECHNICAL PROGRAM
MORNING of Thursday, 5th January 2012
Plenary Lecture V

09:30-10:15

Chair: JN Reddy

Constitutive Theories in Lagrangian and Eulerian Descriptions for Finite Deformation of Thermoelastic
Solids,
KS Surana, University of Kansas
Plenary Lecture VI

10:15-11:00

Chair: RS Jangid and GR Reddy

Free Vibration Analysis of Functionally Graded Plates with a Higher Order Shear and Normal
Deformation Theory,
T Kant, IIT Bombay
Coffee Break:

11:00 11:15

Plenary Lecture VII


11:15 -12:00
Chair: CM Wang
Modified Couple Stress Theories of Functionally Graded Shear Deformation Beams and Plates,
JN Reddy, Texas A&M University, College Station, USA
Plenary Lecture VIII

12:00 -12:45

Chair: MK Shrimali

Earthquake Protection of Non-structural Elements,


CVR Murty, Indian Institute of Technology Madras, India
Lunch & Break:

11

12:45 14:00

ICSSD 2012

AFTERNOON of Thursday, 5th January 2012


SESSION (1) Advanced Computational Methods II
Co-Chairs: K Boo-Cheong and IV Singh
Ultrasonic Standing Wave for Measurements of Cell Compressibility
Deny Hartono, Yang Liu, Kian-Meng Lim, Lanry Lin Yue Yung and Boo-Cheong Khoo (Key Note)

14:0014:30

14:45-

Triangular Differential Quadrature Method in Bending Analysis of Triangular Symmetric


Laminated Plates
M Hajikazemi, M H Sadr and M Ramezani-Oliaee
Evaluation of Elastic Properties of Interpenetrating Phase Composites by EFGM

15:00

Ankit Agarwal, IV Singh and BK Mishra

15:00-

Stability Analysis of Functionally Graded Plate Integrated With Piezoelectric Actuator and Sensor

15:15

Subjected to Electro-Mechanical Loading

15:15

Semi-analytical Post-Buckling Analysis of Composite Plates Containing Free Edge Embedded

15:30

Delaminations by Using Higher Order Shear Deformation Theory

14:3014:45

Priyanka A Jadhav and Kamal M Bajoria

M Taghizadeh, HR Ovesy and M Kharazi


15:30-

Vibration and Buckling Analysis of Cracked Composite Beam

15:45

UK Mishra, SK Sahu and PS Bisi

16:0016:30

Coffee Break: 15:45-16:00


Three dimensional Fracture Mechanics Simulation Using Extended Finite Element Method
IV Singh and S K Yadav (Key Note)

16:30-

Modal Analysis of Woven Fiber Composite Plates With Different Boundary Conditions

16:45

17:00-

I Mishra and SK Sahu


Performance Evaluation of Exterior RC Beam Column Joint Strengthened with FRP Under Cyclic
Load
Ankit Gupta and Pankaj Agarwal
Mathematical and Analytical formulation of Concrete Creep & Shrinkage

17:15

RK Singh and Neha Trivedi

17:15-

Free Vibration Analysis of Relatively Thick Triangular Laminated Plates using Triangular

17:30

Differential Quadrature Method

17:30-

M Hajikazemi, M Ramezani-Oliaee and MH Sadr


Review on Flow Induced Vibrations of a Pipe Containing Flowing Fluid
SR Todkar and KM Narkar

16:4517:00

17:45

SESSION (2) Earthquakes, Winds and Impacts-I


Co-Chairs: GR Reddy and Jamil Abdo
Response Spectrum Procedure for Nonlinear Structural System
GR Reddy (Key Note)

14:0014:30

Effect of Blast Loading on Buildings


Said Elias, SD Bharti and MK Shrimali

14:3014:45
14:45-

Seismic Evaluation of Concrete Bridge Piers With Single Column and Multi Column Bent

15:00

DM Patil, A Melani, A Agrawal and RK Khare

12

ICSSD 2012

15:00-

Modal Parameter Changes of a Steel Bridge Subjected To Speed Variation of Vehicle

15:15

Suresh Kumar Walia, Hemant Kumar Vinayak, Ashok Kumar and Raman Parti

15:15-

Buckling Analysis of Functionally Graded Plates (FGPs) Under Mechanical Loading Using Higher

15:30

Order Functionally Graded Strip (FGS)

15:30-

Effect of Geometry on the Design of Self Supporting Steel Chimney as per IS 6533:1989

15:45

Kirtikanta Sahoo, Pradip Sarkar and V Asha

16:0016:30

Coffee Break: 15:45-16:00


Equivalent Viscous Damping Coefficient of Rough Surfaces
Jamil Abdo and Riadh Zaier (Key Note)

16:30-

Effect of Infill Stiffness on Analysis of RC Framed Building

16:45

Snehash Patel and Pradip Sarkar

16:45-

Seismic Evaluation of Low Rise RC Frame Structure Designed As Per IS 1893 (Part 1): 2002 For

17:00
17:00-

Zone-V
A Melani, RK Khare, RP Dhakal and SR Uma
Comparative Study of Pushover Analysis Methods FEMA and Modal Pushover

17:15

Mujawar Sahil, Patil Nagendra and Murnal Pranesh

17:15-

A Study on the Behavior of Axially Loaded Unplasticised Poly Vinyl Chloride (UPVC) Concrete

17:30

Filled Tubes

17:30-

Numerical Simulation of Bonded Patch Repair Problem Using EFGM and XFEM

17:45

H Pathak, A Singh and IV Singh

MH Sherafat, HR Ovesy and SAM Ghannadpour

Pramod Kumar Gupta, VK Verma, Nabam Ajay, and AK Ahuja

SESSION (3) Fatigue, Damage and Failure of Materials-II


Co-Chairs: G Subbarayan and SP Harsha
A Unified Material-Geometric Approach to Topology Optimization
Hung-Yun Lin and Ganesh Subbarayan (Key Note)

14:0014:30
14:30-

Review on Investigation of Flow Stress Curves of Various Sheet Materials Using Hydraulic Bulge

14:45

Testing (HBT)

14:45-

Fatigue Crack Growth Estimation of Three Dimensional Cracked Panel Repaired with Single Side

15:00

and Double Side Patch

15:00-

Intermittent Chaotic Behavior of High Speed Ball Bearings Due to Localized Defects

15:15

DH Pandya, SH Upadhyay and SP Harsha

15:15-

3D FE Modelling of Buried Continuous Pipeline Exposed To Fault Motion With Material

15:30

Nonlinearity And Large Deformation

Santosh Sadashiv Todkar, NK Chhapkhane and SR Todkar


R Srilakshmi and M Ramji

Vasudeo Chaudhari, Venkata Dilip Kumar P and Pradeep Kumar Ramancharla


15:30-

Nonlinear Dynamic Analysis of Unbalanced Shaft Supported on Ball Bearings

15:45

PK Kankar, Satish C Sharma and SP Harsha


Coffee Break:

16:00-

15:45-16:00

16:30

Diagnostic Application of Carbon Nanotubes as Bio-Sensors


SP Harsha (Key Note)

16:30-

Design of Oscillators Network Controlling Legged Robot Locomotion

16:45

Riadh Zaier and Jamil Abdo

13

ICSSD 2012

Estimation of Stress Intensity Factor of Cracked Panel Repaired with Unsymmetrical Patch Using
Combined FEA and Genetic Algorithm Approach
Mohammad Kashfuddoja and M. Ramji

16:4517:00
17:00-

Static Analysis of Thick Symmetric Cross-Ply Laminated Plates Using Differential Quadrature

17:15

Method

17:15-

Strain-Space Formulation for Elasto-Viscoplasticity

17:30

BM Dawari and RS Iyengar


Mechanical Buckling of Functionally Graded Circular Plates Integrated with Piezoelectric Layers
AR Khorshidvand and MR Eslami

17:3017:45

VB Dawari and VB Zinage

SESSION (4) Modeling of Complex Materials and Structures


Co-Chairs: NE Shanmugam and Dinar Camotim
14:00-

Web Buckling in Horizontally Curved Composite Plate Girders

14:30

NE Shanmugam (Key Note)

14:30-

Buckling and Post Buckling Response of CNT Reinforced Multi-Scale Composite Laminated Plates

14:45

G Bhardwaj, AK Upadhyay, R Pandey and KK Shukla

14:45-

An Investigation on the effect of Single Walled Carbon Nano-tube Orientation and Dispersion in

15:00

Nano-composites

15:00-

A Comparison of Total and Updated Lagrangian Methods for Geometrically and Materially

15:15

Nonlinear Large Deformation Problems

Unnati A Joshi, Satish C Sharma and SP Harsha

IV Singh, BK Mishra, Pravin Singh, V Bhasin, Kamal Sharma and IA Khan


15:15-

Efficient C0 FE Model For Free Vibration and Buckling Analysis of Laminated Sandwich Beams

15:30

with Soft Core

15:30-

Study of Matrix Crack and Inclusion Interactions Using Digital Photoealsticity and FEA

15:45

M Ramji and RGR Prasath

HD Chalak, Anupam Chakrabarti, Abdul Hamid Sheikh and Mohd. Ashraf Iqbal

Coffee Break:

15:45-16:00

16:00-

Determination of the Fundamental Frequency of Concrete Beam Specimen using Multi-Impact

16:15

Stress Wave Generator

16:15-

Numerical Study on Buckling Control of Aluminium Shallow Shell Using Piezoelectric Actuators

16:30

Sandeep Jose, C Lakshmana Rao and Arun K Tangirala

16:30-

Analysis of Single Walled Carbon Nanotubes with Multiple Defects

16:45

Anand Y Joshi, Satish C Sharma and SP Harsha

16:45-

A Heuristic Based Optimal Airfoil Geometry and Ballast System Design of Bio-Mimetic Robot Fish

17:00

for Drag Minimization

17:00-

Love Waves in Prestressed Elastic Multilayered Media

17:15

Inder Singh Gupta and Sandeep Kumari

17:15-

Finite Element Modeling for Dynamic Characteristics of Tatara Cable-Stayed Bridge

17:30

B Asgari and SA Osman

Conference Banquet -

14

Rikki Vitria, Hilmi Sanusi and Roszilah Hamid

Alok Agrawal, Nirmala Kunwar, Rajesh Kumar and SK Panda

1900 - 2200

ICSSD 2012

TECHNICAL PROGRAM
MORNING of Friday, 6th January 2012
Plenary Lecture IX
09:00-09:45
Chair: M Shrimali
Seismic Response of Asymmetric Building with Semi-Active Friction Dampers,
RS Jangid, IIT Bombay
Plenary Lecture X

09:45-10:30

Chair: MK Shrimali

Machinery Health Monitoring and Diagnosis,


NS Vyas, Indian Institute of Technology Kanpur, India
Coffee Break:

10:30 10:45
SESSION (1) Earthquakes, Winds and Impacts-II

Co-Chairs: GD Ramtekkar and Vasant Matsagar


Nonlinear Dynamic Behavior of Granular Materials in Base Excited Silos
Pravin Jagtap, Vasant Matsagar and Tanusree Chakraborty (Key Note)

10:4511:15

11:30-

Parametric Resonance Characteristics of A Cantilever Beam with an Open Transverse Crack


Subjected To Harmonic In-Plane Loading
UK Mishra and SK Sahu
Seismic Analysis of Ground Soft Story Buildings with Base Isolation

11:45

A Kasar, BL Swami, SD Bharti and MK Shrimali

11:45-

Three Dimensional Modeling of Pounding Between Adjacent Buildings

12:00

Chenna Rajaram and Ramancharla Pradeep Kumar

12:00-

Seismic Response of Asymmetric Building with Semi-Active Friction Dampers

12:15

Snehal V Mevada and RS Jangid

12:15-

Thermoelastic

12:30

Temperature-Dependent Material Properties

12:30-

Genetic Algorithm Based Passive Control of Structures using Tuned Mass Dampers

12:45

Kotla Shiva Kumar and Diptesh Das

12:45-

Pounding Influence on Adjacent Structures with Different Analytical Models for Impact Simulation
Nilesh U Mate, SV Bakre and OR Jaiswal

11:1511:30

13:00

Buckling

Analysis

of

Piezoelectric

Lunch Break:

15

Coupled

FG

Circular

Plates

with

AR Khorshidvand, MR Eslami and S Adib Nazar

13:00-14:30

ICSSD 2012

SESSION (2) Earthquakes, Winds and Impacts-III


Co-Chairs: Ayman A Seleemah and SD Bharti
10:45-

Proposed Configurations for Damper Placement in Structures


Ayman A Seleemah and Amr Z Elkady (Key Note)

11:15
11:1511:30

Effect of Anchoring GFRP Sheet on Ultimate Strength of Slab


Dipak G Chothani, Narendra K Arora and Sweta P Dave

11:30-

Modeling of Large Span Reinforced Concrete Shell Structures for Seismic Evaluation

11:45

Rakesh Kumar Khare, Raana Pathak, Swatilekha Guha and Shilpa Rai

11:45-

Method for Computation of Member Forces Due to the Effect of Vertical Ground Motion

12:00

Shivam R Mishra

12:00-

Small Nonlinear Elastic Lateral Vibrations of Flanged Concrete Columns

12:15

Mamta R Sharma, Arbind K. Singh and Gurmail S Benipal


Optimum Sizing of X-Plate Dampers for Seismic Response Control of Multistoried Buildings
Nikil Pujari and SV Bakre

12:1512:30

Nonlinear Dynamics of Time delayed Feed Back System by FFT Based IHB Method
RK Mitra, S Chatterjee and AK Banik

12:3012:45
12:45-

Discretization of Random Fields in Probabilistic Mechanics

13:00

Shalu Choudhary and Debraj Ghosh


Lunch Break:

13:00-14:30

SESSION (3) Analysis of Composites and RC Structures II


Co-Chairs: R Hamid and I Mishra
10:45-

Energy Loss Due to Wear and Plastic Interaction


Jamil Abdo and Riadh Zaier (Key Note)

11:15

Measuring of Vibration in Concrete Subjected to High Strain Rate Loading In Pressure Bar System
R Hamid and M Kasmuri

11:1511:30
11:30-

Effect of Axial Relaxation on the Torsional Behavior of Cracked Nanowire

11:45

Karan Saini and Naveen Kumar

11:45-

Investigation of Flexural Strength of FRC by Using Silica Fume

12:00

RM Damgir and YM Ghugal

12:00-

Comparative Study of Fixed Base and Base Isolated Building using Nonlinear Analysis

12:15

Pradnya Thakare and OR Jaiswal


Seismic Control of Benchmark Cable-Stayed Bridge Using Variable Friction Pendulum Systems
Purnachandra Saha

12:1512:30
12:30-

Performance of Multiple Dual Layer Tuned Mass Dampers for Structures Subjected to Harmonic

12:45

Excitation Tanuja P Bandivadekar

12:45-

Low Velocity Impact Analysis of Sandwich Plates Using General Linearized Contact Law

13:00

VS Managuli, AK Upadhyay and KK Shukla


Lunch Break:

16

13:00-14:30

ICSSD 2012

SESSION (4) Structural Health Monitoring and Control Methods


Co-Chairs: AV Bhaskararao and SV Bakre
10:45-

Optimum Parameters of Visco-Elastic Damper to Link Adjacent Structures

11:15

AV Bhaskararao and RS Jangid (Key Note)

11:15-

Visco-Elastic Dampers For Controlling Seismic Vibrations Of Benchmark Highway Bridge

11:30

Suhasini N, Madhekar Gaurav and S Parmar

11:30-

Semiactive Hybrid Control for Response Analysis of Seismically Excited Coupled Building

11:45

SM Dumne, SD Bharti and MK Shrimali

11:45-

Health Monitoring of Actual RCC Buildings by Studying its Dynamic Parameters

12:00

Varinder S Kanwar and Naveen Kwatra


Critical evaluation of Torsional Provision in IS 1893-2002
B Bijily and P Sarkar

12:0012:15
12:15-

Multihazard Risk Mitigation Strategies for Indian Urban Infrastructure

12:30

Nilesh S Jha and RK Gajjar

12:30-

Effect of Hoop Tension on the Stability of Masonry Dome

12:45

Mahesh Varma and Siddhartha Ghosh

12:45-

Health Monitoring of Retrofitted Building Frames Using GFRP

13:00

Naveen Kwatra, Maneek Kumar and Atiwat Vimuttasoongviriya


Lunch Break:

17

13:00-14:30

ICSSD 2012

GENERAL INFORMATION
http://www.tamu.edu/acml/icssd2012

REGISTRATION
Registration 3rd January, 2012
Days 1 - 3

4th - 6th January, 2012

1700-1800 hours
0800 1600 hours

Registration Fee
General Speaker
: $ 550 (on or before 31st October, 2011)
: $ 600 (after 31st October, 2011)*
: Rs. 10,000 (for delegate from India)
Special Coauthor Rate
: $ 250 (provided the presenting author pays full rate)
*Special Rate
: $200 (A special rate of $ 200 applies to students.)
Payment & Remittance
Bank Draft/Cheque (no credit cards please): Cheques/Bank Drafts should be made payable
ICSSD 2012, ICICI Bank, MNIT Campus Branch, Jaipur (India). Registration fees are also payable
through ECS (Electronic Clearing Service) and the following information may be used for the
ECS transaction:
Account Title
Account No.
IFSC code

: "ICSSD 2012"
: 676801700004, at ICICI Bank MNIT Jaipur
: ICIC0006768

Remittances from outside India:


Bank Routing
: Chase Manhattan Bank, New York
Swift Code
: CHASUS33XXX
To Bank
: ICICI Bank, Mumbai
Swift Code
: ICICINBBCTS
Nostro Account No : 001-1-427374
INSTRUCTIONS FOR SPEAKERS
At the point of registration, please confirm your equipment needs. CDs/USB Drives
containing your presentation files must be submitted at this point. All CDs need to be
labeled with your name, paper title and session.
Please proceed to the venue of your session 10 minutes before the start of the session.
You may collect your presentation CD from the Secretariat Room after the session.
All-important notices (including changes to program) will be posted on the Secretariat
Message Board near the Registration Desk.
Please note that the presentation for general papers at the 4 th ICCSD will last for 15
minutes. Kindly leave about 45 minutes for the question and answer segment. The
chairpersons for the sessions will be keeping to time strictly. However the presentation
time may be adjusted by the chairperson of your session based on the actual
number of papers presented in your session. In a typical presentation of 15
18

ICSSD 2012

minutes, the chairperson will ring the bell once when 10 minutes have passed and twice
when 12 mins have passed. When you hear the second bell, please make a suitable
conclusion to your presentation immediately.
All speakers will be asked (at the point of registration) to fill out a Speaker Information
Sheet. Kindly fill in the information sheet and pass it to the chairperson at the beginning
of the session.
INSTRUCTIONS FOR SESSION CHAIRPERSONS
If you are chairing a session, please review the above Instructions for Speakers.
Please keep time strictly.
If you need any assistance, you may ask the assistants assigned to the venue of the
session that you are chairing.
COFFEE BREAKS AND LUNCHES
Coffee and soft drinks will be provided for all registered conference delegates at the break times
as stated in the program. Lunches are also provided during the lunch time.
CONFERENCE BANQUET
The conference dinner is scheduled for Thursday, January 5th. Please inform the registration
desk at the conference of any special dietary requirements.
Date
:Thursday, January 5th 2012
Time :1930-2200 hours Dinner
Venue :TBA
Price
:Included for conference registrants.
Accompanying persons may purchase the banquet ticket for Rs.1000
CONFERENCE PROCEEDINGS
All registered conference delegates will receive the ICMMS Proceedings on a CD. Additional
copies of proceedings CD can also be purchased at the Registration Desk for Rs 1000.
CONFERENCE SECRETARIAT ROOM
The Conference Secretariat is located at the conference venue (look for the signs). It will be
opened on 3rd January, 2012 from 1700 1800 hours for registration, from 4th to 6th January 2012
from 0800 1600 hours.
POST-CONFERENCE TOUR
A 2-day tour is being organized and would be announced in the conference website. The cost
of the tour is Rs.5,000/Person (about 110USD/Person).
VENUE and HOTEL ACCOMMODATION
Rajasthan's beautiful Pink City Jaipur, (Pink - because of the color of the stone used exclusively in
the walled city) has a busy tourist season during December-January. For the benefit and
convenience of ICSSD delegates, special tariffs applicable to ICSSD delegates only have been
negotiated with a few hotels within 5-8 kms of the Conference Venue. Please note that only
limited rooms are available at this special rate.
19

ICSSD 2012

For hotel reservation please e-mail the hotel contact person with a copy to:
Dr. S. D. Bharti
Member, Organizing Committee, ICSSD-2012
e-mail: icssd2012@gmail.com; hse.mnit@gmail.com.
TRAVEL VISA INFORMATION
Information on applying for a travel visa to India may be found here:
https://indiavisa.travisaoutsourcing.com/homepage
If you require an official letter of invitation, please contact the conference secretariat with the title
of your talk and your full name and address.
TRANSPORTATION
The conference would be held at the Malaviya National Institute of Technology Jaipur, India. The
Institute is located around 4.0 km from Jaipur Airport (IATA Code: JAI) and around 8.0 km from
Jaipur Railway Station (Station Code JP).
(1) From the Jaipur Airport to the hotel
Take taxi or cab.
(2) From the hotel to the conference hall (around 2km)
Take taxi for no more than 5 minutes
(3) City traffic
(a) Taxi
(b) Bus

20

ICSSD 2012

You might also like