Professional Documents
Culture Documents
RF LOGICS INC.
ACCESS CONTROL SERVER SETTING
MANUAL
User Manual
RF LOGICS INC.
RF Logics Inc.
PREFACE
This manual is a software configuration and reference for the AC Server Access Control &
Video Surveillance Security System. An overview of the hardware is provided and
information on configuring the software to fit the Access Control & Video Surveillance
Security Requirements desired for the system.
This manual is intended for the person who sets up and operates the AC Server System,
and technical support person who provides customer support.
TRADEMARKS
All brand or product names mentioned herein are used for identification purposes only and
may be trademarks or registered trademarks of their respective companies.
RF Logics, the RF Logics Logo, and AC Server access control NVR System are registered
trademarks of RF Logics Inc.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
May. 2009
OPX-930
Rev. 000
Table of Contents
AC SERVER SPECIFICATIONS..........................................................1
AC SERVER PREPARATION & CONNECTION.................................3
AC Server Hardware Connection..................................................3
ITDC LAN Module IP Configuration Setup......................................6
Required Software...............................................................9
1.3.
2.
2.2.
Setup....................................................................................30
2.3.
Database..............................................................................49
2.4.
Access Control.....................................................................52
2.5.
2.6.
Report...................................................................................69
2.7.
Display Setup.......................................................................75
2.8.
Lift Control............................................................................78
1.1.
2.
2.1.
Site Information......................................................................................... 91
2.2.
Startup........................................................................................................ 92
2.3.
Screen........................................................................................................ 94
2.5.
Auxiliary Functions...................................................................................94
3.
Camera Setup............................................................................................... 98
3.1.
General Setting.......................................................................................... 98
3.7.
Scheduling Setting..................................................................................100
3.7.1.
Recording schedule.............................................................................100
3.8.
Holiday Setting........................................................................................101
3.9.
Notify Schedule.......................................................................................101
3.10.
4.
5.
6.
7.
AC Server Search.......................................................................................117
8.
8.1.
8.2.
8.3.
8.4.
Default user: Default user will be assumed by the program to be using the DVR
selected............................................................................................................... 126
8.6.
Notify Login: Set duration of login time for a user when the user, (triggered by event
Chapter
AC SERVER SPECIFICATIONS
1~32 Camera Inputs / Output: Up to 32 camera inputs are available on screen for digital
handling
1~32 Sensor Inputs: Up to 32 sensors can be linked to the system
1~8 Digital Outputs (Relay Outputs): Digital Outputs can be used to activate relays like
shutters and sirens, and activation can be linked to sensor and motion detection.
Sound Recording and Two-Way Communication Capabilities: Sound can be recorded with
video images. Two-way communication is possible between AC Server-Server and AC ServerNet.
Display Features (w/ Multi-Viewing): Up to 1, 4, 6, 9, 10, 16 or 32 different camera shots to
be displayed onscreen at the same time.
PAN/TILT/ZOOM/FOCUS Capabilities: Each connected camera can be manipulated through
the AC Server main program as long as each camera supports such capabilities.
Auto Rebooting System: When AC Server detects an error or malfunction within the system,
it will automatically reboot the system in order to correct it.
Motion Detection and Sensor Trigger: Detection features make it possible to record images
only when movement is detected, preserving volume space and maximizing the use of
physical storage space.
Scheduled Recording: Scheduling allows the administrator to record images only during
designated time periods, if so desired. Every combination of scheduling is available in the AC
Server Schedule Recording Setup.
Data Backup and Auto Backup: Data can be preserved through various formats (DAT, CD,
or DVD) and data from specific cameras and/or time periods can be specifically isolated for
backup as well. Much like scheduled recording, backup of data can be scheduled as well.
Digitalized Video Search: Recorded data features digital playback for each camera
simultaneously or one at a time. Playback features include advanced search features and
image extracting, which allows portions of existing video to be extracted and saved as a
separate file.
Network Support (PSTN, TCP/IP, LAN, Modem Protocol Support): AC Server supports
network access, which allows administrators to login to AC Server main and remotely access
the features provided locally.
Integration with Text data from External Devices: Data from external devices (POS, Access
Control, ATM, etc) can be recorded with AC Server video images. Text Search allows to search
data from external devices with AC Server video image when event occurs.
AC Server System Hardware Specification Table
Feature
AC Server 8
AC Server 16
AC Server 32
8 BNC Port
16 BNC Port
(NTSC/PAL)
(NTSC/PAL)
32 BNC Port
(NTSC/PAL)
Sound Input
8 Port
16 Port
32 Port
Sensor Input
8 Port
16 Port
32 Port
Relay Output
4 Port
4 Port
8 Port
240 FPS
480 FPS
960 FPS
Camera Input
Recording Speed
Main Display
Resolution
Composite Output
Image Format
MPEG4
Playback Speed
Recording Mode
Remote Control
Back-up
TCP/IP
POS/ATM Input
Watermarking
System Monitoring
Network Features
Event Notification
Storage
Search
Remote Access
Multiple Group
Chapter
1
2
Connect VGA & DVI cables to the graphic card for Dual Screen Display
Audio Inputs
Connect Camera cables to Video Input & Audio cables to Audio Inputs
17.1 EIA-485(Formerly RS-485) Input: It is for two-wire, half duplex, multipoint serial
communication ports. It can be used for PTZ Cameras. 32 Channel AC Server
has an additional TV-Out port on EIA-485 Board.
17.2 RS-232 Input / Output Port: Serial binary data signal port. AC Server uses it for
POS data input.
Controllers.
Note: Make sure the ITDC Control boards are equipped with TCP-IP
LAN Module (IIM7100A).
Before running the 7100A_C.exe to assign IP address, we first need to find out
what the Subnet Mask and Default Gateway of the AC Server computer is. Click
on Start, and type CMD on command line to run command mode.
Type IPCONFIG, then IP address, subnet Mask, and Default gateway are
listed. Please write them down on a piece of paper.
Click on Search. Highlight the MAC Address which you would like to
configure the IP address.
10
Type in the available IP address and type in subnet and gateway addresses
concurrent to ITDC. Write the IP addresses which obtained from
IPCONFIG command. This information would be needed in order to set the
communication between AC Server and ITDC board. Type in 5000 for the
default port.
Click on Serial Menu, adjust the Speed, Data bits, Parity, Stop Bit, and Flow
as above. *Make sure to adjust Flow as CTS/RTS mode.
Click on Setting to save the setup. Wait for 10 second. And click on
Search again. Mac address for the IP configured unit will appear. Verify the
settings.
Repeat the procedures if more than one ITDC boards are connected.
11
Chapter
12
The MySQL software is Dual Licensed. Users can choose to use the MySQL
software as an Open Source product under the terms of the GNU General Public
License (http://www.fsf.org/licenses/) or can purchase a standard commercial license
from MySQL AB. Seehttp://www.mysql.com/company/legal/licensing/ for more
information on My SQL licensing policies.
13
14
15
1.2.6Keep clicking Next until you see the below screen and select (Check the box)
Configure the MySQL Server now option.
16
17
1.2.9Check All Options and click Next. Include Bin Directory in Windows Path is not
necessary but it provides very useful tools in case of using command line prompt.
18
1.2.10
First time setting, it requires to setup root password. This password is also
used at Central Monitoring System if CMS uses the database option. Please make
sure Enable root access from remote machines is selected (checked box).
Unckeck Create An Anonymous Account and Click Next to proceed.
19
20
21
Chapter
AC SERVER SETTING
AC Server Access Control / Elevator Control Connection Setting
1. AC Server Setting Program
1.1 Locate the AC Server folder From Start Button Menu, and Execute the AC Server Setting
under AC Server Folder
22
1.2 Type Admin ID & Admin Password (Default ID is Admin & Password is Admin)
23
2. Program Definition
24
3. Database Definition
25
4. DVR Definition
26
DVR ID: AC Server is assigned a DVR ID when user adds a DVR to AC Server
as identification.
27
5. User Definition
28
5.2 After you create a new user, you need to setup the permissions for the user by
selecting user ID & clicking Permissions button, if the user is User level account.
29
5.3 Assign proper authorities to the user by checking the box of menu codes and save the
changes.
5.4 Select a user and Click Modify to change User Name, Password, and User Level.
6. Loop Definition
30
31
6.2 Select a loop and Click Modify Button to edit existing loop
32
33
Interval Time: Choose the start time to display video when an alarm occurs.
0: Display the image from the time when an alarm trigger.
Less than 0: Display the image from the selected time before an alarm
trigger.
Greater than 0: Display the image from the selected time after an alarm
trigger.
7.2 Modify existing camera mapping definition by clicking Modify button and edit the
settings of the definition as same way as adding a new definition.
8. Controller Definition
8.1 Modify Controller Definition
Existing ITDC Controller Setting can be modified by pressing Definition
under Controller Definition or double clicking one in the list.
34
35
Controller Initialize: Initialize ITDC Control Panel and clear all ITDC
settings to factory default.
Card Initialize Data: Clear all ID card registration information from ITDC
Control Panel
Event Data Initialize: Clear all transaction event data left on ITDC Control
Panel.
36
Chapter
38
Card Printer
1.1.4 View
Door Status
Alarm Status
Output Status
Fire Status
Input Device Status
Communication Status
Map Viewer
Search
1.1.4. Report
Card Holder Report
Delete Card Holder Report
Event History Report
Alarm History Report
Visitor Event History Report
1.1.5. Time / Attendance
Time / Attendance Time Definition
Time / Attendance Holiday Definition
Daily T&A Management
Monthly T&A Management
39
41
42
Loop No.: Select the loop no. that biometric reader is connected to.
Select Biometric Reader: Choose proper biometric reader model from the list
FGR006 / EX (RF Proximity)
FGR006 SR (Smart card; Mifare)
Finger006 / EX (RF Proximity)
Finger006 SR (Smart card; Mifare)
43
Adaptive Mode
0-Not Use: Disable Adaptive Mode
1-Use: To enhance the effectiveness of fingerprint recognition (Recognition
process is comparatively slow. The red light of the module blinks while
scanning)
44
45
Modify
Select the Biometric Reader to be modified
Click Modify button
Change the settings from Biometric Reader Communication Definition
Window
Click Save and Close buttons
Delete
Select the Biometric Reader to be deleted
Click Delete button
Transmit
When setup is performed, it is not active until transmitted to Controller. Transmit
button will send the setting data to designated ITDC.
46
Door/Reader definition explains door and reader configuration data. Doors and readers are
connected to each ITDC Controller. Therefore, software needs to be defined the door and
reader configuration to control events occurrence and ITDC controller settings.
Find
Find is used to get relevant information pertaining to the inquiry when information is
available. It is used to edit and delete the existing data information.
2.2.1. Anti-passback / Door Open Alarm Time
Add
If using 2 doors, configure In and Out reader or In only for all doors.
If using 3 doors, 1 door can be configured as Door In and Out reader, and
the 2 doors as In reader only.
If using 4 doors, all doors are configured as Door In reader only.
Door Open Alarm Time: Determine how long the door can be opened. After the
setting time on Door Open Alarm Time, it become an alarm as Door held open
Transmit: Transmit button will send the setting data to designated ITDC.
Modify
Controller Name: Show the controller name linked the selected reader.
Reader: Show the selected Reader No.
Reader Information
Reader Type
Proximity Reader
Proximity & PIN Reader
Biometrics Reader
In order to use the keypad as input devices, check the box to enable
the keypad.
48
Operation Mode
RF Only: RF Proximity Mode only
RF + Password: RF Proximity & Password Mode.
49
It is time schedule setting for RF Card only access while the reader is set as RF
+ Password Mode.
Normally the reader requires RF and Password to grand the access but with
time schedule for Card only, User can obtain the access with card only in predefined segmentations of time period
Time Schedule is enabled when the RF+Password Mode is selected
Time Schedule must be defined before the Time schedule for Card only
Transmit: Transmit button will send the setting data to designated ITDC.
After finishing all doors, readers, and related settings, User can transmit all setting
data to ITDCs at once by using Set Batch Controller command under System of
Setup.
2.2.3 Door Definition
Add
Area: Select the Area from pre-defined area definition from database
setup
Floor: Select the Floor from pre-defined floor definition from database
setup
Door Name: Input the name of door for your reference. It will show up on
reports, so input easily identified name for definition.
50
Modify
Transmit
Delete
51
After finishing all doors, readers, and related settings, User can transmit all
setting data to ITDCs at once by using Set Batch Controller command.
2.3 Input Point Definition
Modify
52
Area: Define the Area (location) of Input which is already pre-defined from
database setup
Floor (Location): Select the Floor (location) of input which is already defined
from database setup
Input Type
Exit Button
Door Contact
Sensor
Fire
Tamper
Electric Stoppage
Description
For Input Point Description, input the letters displayed in the event window
that corresponds to the input signal occurrence.
Decide which outputs will activate in Output 1-15, when an input signal
occurs. The input value for the Output is setup in seconds.
00 sec for input will result in no signal for the corresponding output.
Selecting from 01-99 sec will let the output activate for specified seconds.
Click Save & Close button to save and exit from the window
53
54
Input Point sets which outputs of the ITDC board will occur from receiving the
input signal from the ITDC board
Decide which outputs will activate in Output 1-15, when an input signal
occurs. The input value for the Output is setup in seconds
00 sec for input will result in no signal for the corresponding output. Selecting
from 01-99 sec will let the output activate for specified seconds
All Advanced Definitions for readers and special ID settings are same way
as described. Please refer Input Advanced Definition
55
56
If you connect the sensor in specific input relay, it occurred event anytime,
day and night detecting the situation.
This case, surplus of event cause slowing the processing, which cause that
the useless information would be stored.
If you set the time schedule for input point connected sensor,
like 08:00~18:00 which not works during set time. Sensor works during
18:01~07:59. Except above time, the event will not occurred, even the sensor
works.
2.3.4 Input Point Signal Type Definition
You can configure signal handling method of ITDC, if the Input Point Type
connected input devices (Exit, Contact, Sensor, etc..) signal is NO or NC.
57
Add
From Output Point Type Definition List Screen, Press Add button to
configure the Output Point Type
Select the Controller name of location of Relay or TTL Output
Door Type will show current setting for ITDC Setting
Output No.: Output No. indicates which output of the controller linked
Output Type
58
Modify
From Output Point Type Definition List Screen, Press Modify button to
bring up the configure screen of Output Point Type Definition
It is virtually same procedures as adding Outpoint Type ad described
above
Select desired setting and click Save
Delete
From Output Point Type Definition List Screen, Press Delete button to
delete selected output point type definition
59
60
Click the Initialize Type Field button. It will show different initialize options.
Card Data Initialize: Clear all stored data in ITDC and set to default value
Memory Buffer Initialize: Clear all stored data in ITDC and set to default value
T/S, H/D Initialize: Clear Time Schedule & Holiday Schedule in ITDC and set to
default value
62
63
Transmit only searched card holders in database: Send only the card holders
information matched finding conditions to the selected controller and biometrics.
Card holder List shows the card holder data to be transmitted.
Click Transmit button to start batch transmission.
If the transmission is failed, Check the communication and try again.
64
Map Definition
Map Code: Map identification number code
Area: Predefined area code for map icons
Map Information: User definition of the map
Map Image Load: Load user map image
Map Image Clear: Clear user map image from the screen display
Icon Definition
Device Type
o Door: Door as device type provides 4 status icons such as lock & open, lock &
close, unlock & open, and unlock & close. Doors & Parking Gates are available
65
o Input: Input as device type provides 2 status icons such as normal & event
icons; Alarm, Fire, Glass Sensor, Temper Switch icons available
o Camera: Camera as device type provides 2 status icons such as normal &
Event.
Click Add to load the icon and it will display the icon on top left corner of the map. User
mouse to drag the icon to move and place on the proper location.
Select the icon by click on the icon of the map and Click delete to eliminate the icon from
the map
Click Save to store the settings & Click Close to exit from the Map Definition Screen
2.6.2 Modify Map
From the map definition list window, select an existing map to be modified and Click
Modify button to show the map edit screen.
Modify the map the same way as adding a map described above 2.6.1.
Click Save to store the settings & Click Close to exit from the Map Definition Screen
66
67
Modify
From the Fire Group definition list window, select an existing Fire Group to be
modified and Click Modify button to show the Fire Group edit screen.
Modify the Fire Group the same way as adding a Fire Group described above
2.7.1
Click Save to store the settings & Click Close to exit from the Fire Group
Definition Screen
68
2.8 Option
Option menu is consists three sub-options to notify when alarm occurs including Invalid ID,
Invalid Time schedule, Anti-Passback (in), Anti-Passback (out), Password Error, Access
Door Error, Fire, Force Door Open, and Over Time Door Open.
69
70
SMTP Setting
Method
o No SMTP: Find outgoing mail Server (SMTP) automatically.
o SMTP/No Login: Use this option if you mail Server is SMTP Server
without Login process.
71
Over Time Door Open: Door open longer than allowed time.
72
o Mail Information
73
74
Main Program Size & Position: Set the position of AC Server main screen and its
window size.
Card Printer Path: Click Browse to set the file path where the card printer
program is.
75
Popup Auto Close: Set the period of time to display image data when an alarm
happens.
76
3. Database
3.1 Area Definition
Area / Floor configuration is used for default data creation to distinguish access door,
reader, and sensors by installed locations. Multiple buildings can be designated by area,
and the floors correlating to the area can be distinguished.
Add is used to create new data. Select a new area code and input Area Name and
Click Save to create new area database
Select an existing area from the list and Delete button to erase an area database
Select Area Name from the Predefined Area Definition from Drop-Down Menu button
77
Add Company
Click Add button will create the company definition database.
78
Add Department
79
Add Title
80
4. Access Control
4.1 Holiday Definition
This function connects to Time Schedule to apply. Time Schedule can be setup from MonSun with designated time for each day.
For this function, the holiday data needs to be initially setup. Holiday Definition is to apply
holiday to Time Schedule and transmit to ITDC Controller.
Add
Add is used to create new holiday definition data. Click Add button to add holiday
definition through input screen.
81
Select Holiday Code. (Holiday Code can be used from 01-10 giving 10 codes for
use)
Input Holiday Name to be saved
Select the corresponding date, and click the date on the calendar and click >>
button to add the date
If an exception is needed on a selected Holiday, select the corresponding date and
click and click << button
Click Save button to save data, and click Close button to finish
Click Transmit button to apply the setting to ITDC Controller
Click Modify button after changes made from existing holiday definition, will save
the changes of holiday definition
Click Delete button after selecting an existing holiday definition from the list.
82
o Add
Add is used to create new Time Zone definition data. Click Add button to add
Time Zone definition through input screen.
Select Time Zone Code and Input Time Zone Name as appropriate.
83
For example, the screen above shows (Access granted 08:30-12:00, 12:0113:00 no access, 13:01-18:00 access granted)
Namely if you admit to access door at AM and dont admit at PM, it is applied
in this case. The division of time is needed, in case of application of Lock or
Unlock of access door.
84
o Modify: Click Modify button after changes made from existing Time Zone definition,
will save the changes of Time Zone definition
o Delete: Click Delete button after selecting an existing Time Zone definition from the
list.
4.2.2. Time Schedule Definition
This function uses Time Zone data to setup time schedule for each day. It is applied to
the user to control access time, and is connected to the In/Output Point time schedule.
Time Schedule can create up to 15 codes, and time schedule within the codes are sent
to the ITDC Controller for activation. Setup the time schedule as needed.
o Add
Add is used to create new Time Schedule definition. Click Add button to add Time
Schedule definition through input screen.
Select Time Schedule Code. It will display only the registered codes. Use
one of the 15 codes.
85
Select Holiday Code to apply holiday, and if not used select Not Use. If
Holiday Code was selected, Time Schedule Code for holiday needs to be
selected.
Selecting the Time Schedule Code will display at the bottom screen location,
current selected time range in hour format.
o Modify: Click Modify button after changes made from existing Time Schedule
definition, will save the changes of Time Schedule definition
o Delete: Click Delete button after selecting an existing Time Schedule definition
from the list.
o Click Transmit button to apply the setting to ITDC Controller
4.3 Access Group Definition
When multiple units of ITDC are operated, by using each access door connected to the
system, you can create Access Group to register user in a group type to control access area
as a whole or control as is.
86
Add
Add is used to create new Access Group definition data. Click Add button to create an
Access Group definition.
o Access Group Code: Select Access Group Code and Input Access Group Name as
appropriate
o Select the Time Schedule to apply
o Select the Access Door from Available Access Door List and Click >> button to
register and apply corresponding Time Schedule
o Time Schedule and Access Door work as a team to setup Access Group. This
means the access door and setup Time Schedule correspond to using the setup
access door.
o Repeat the processes to register additional Access Group Definition
o To eliminate Access Door by selecting the door and click << button.
o Click Save to store the setting and Click Close to exit
87
Find
Find is used to get relevant information pertaining to the inquiry when information is
available. It is used to edit and delete the existing data information
4.4.1. Add Card Holder
Add is used to create new ID card holder data. Click Add button to create new card
holder user data through input window.
Detail Information
88
Input Person ID, Name, and Card Number. These contents are required on
registering ID cards.
Card number is different from Person ID number.
Depends on the card type, the digits of card number can be from 8 to 10.
Person ID number must not be duplicated. This field is used as a key to identify
the card holder.
Input 4 digits password on password field if using ID Card+PW to authenticate. If
password was not inputted, the default value is 0000.
Input card holders data in Detail Information Section
Input Registration and Expiration date. Putting a check mark on Auto Delete on
Expired Date will delete the corresponding ID number.
This software has the function of auto-deletion of ID number at the expiration
date by transferring deletion order through communication after check expiration
date in S/W. Namely it is processed only in case that program is being operated
normally.
But even though that program was ended, when it is operated again, registered
persons who expiry date is set at former date than the date of PC and autodeletion is checked are deleted automatically.
In case that communication error is occurred, it may not be processed
automatically, for that this function is done through the communication of
program.
Access Group
This is used to limit the access area on the user by selecting placed Access Group or
selecting Individual Access Door to limit the access area.
89
In case that you limit the access through defined access group, choose defined access
group and choose access group at the lower part. Then access door list is included in
access group is indicated at the bottom.
The setting of Individual access doors can be used at the access group setting mode in
case that proper access group does not exist, or in case that you want to make and set
the access group directly. Select setting of individual access doors and select the time
schedule in the same method with access group setting, after that, Add the door is
admitted working together with this time schedule.
90
Click Capture Fingerprint and put your finger on the scanning surface of hamster
device firmly and steadily. Hamster will blink red light.
System will capture the fingerprint twice and check for the quality whether it is useable
or not.
Fingerprint Template Quality Level Section provides fingerprint registration quality
status
Card Option
Normal Card: Normal ID card registration method.
Management Card: Register ID card as management card in case of using Two
(2) Men Operation. Both management card and visitor card have to gain the
access on Two (2) men operation specified doors.
Visitor+Management Card: Visitor ID card registration only for Two (2) Men
operation. Both management card and visitor card have to present to gain
access on Two (2) men operation specified doors.
Arm / Disarm Card: ID card registered as Arm / Disarm card. Arm mode is
activated, reader wont read any cards except Disarm card and operates relays
(outputs) as Arm Mode. Disarm card will activate normal operation.
91
This is used to limit the access of elevator floor on the user by selecting placed Lift
Access Group or selecting Individual Lift Access to limit the floor access.
In case that you limit the floor access through defined lift access group, choose defined
access group and choose lift access group at the lower part. Then access floor list is
included in lift access group is indicated at the bottom.
The setting of Individual lift access can be used at the lift access group setting mode in
case that proper lift access group does not exist, or in case that you want to make and
set the lift access group directly. Select setting of individual lift access and select the
time schedule in the same method with lift access group setting, after that, Add floor is
admitted working together with this time schedule.
Modify button on the card holder management window after selecting a ID card user,
will remove the selected ID card holder from the list and move to Modify Cards
Management section.
Delete button on the list will result the ID card holder from the registered ID card
holder management database. User can recover the deleted ID card holder information
from Deleted ID Card Management window by clicking Recover button.
Click Save button to store information & changes and Click Close to exit
92
93
To recover deleted ID card, Select the ID card from the list and Click Recover button. It will
move the ID card holder information to Card Holder Management window and activate the
normal function as normal ID card.
To delete the card permanently, Select ID card from the list and Click Delete button and it
will erase the information data permanently.
4.7 Visitor Management
Visitor management is processed by identifying users as non regular card holder. Visitors
data contains company, name, phone number, visiting purpose, visiting company, visiting
dept., visiting person. Access area, lift access floor, and time can be controlled by access
group.
Detail Information
Input visitor information in detail information section. Company, Name, Card No. are
mandatory information.
Telephone No.: Visitors telephone No. available to contact.
Visiting Company: Pre-defined company information
Visiting Department: Pre-defined departments information
94
Access Group
Select from the Access Group Drop-Down Menu.
95
Choose from Pre-defined Lift Access Groups and Time Schedules by clicking DropDown Menu and select.
96
Visitor Card Only: normal visitor card option. This option is the default value of
normal Visitor card registration.
Visitor + Management Card: Two (2) Men operation option. Two Men Operation
requires this option as visitor card registration.
Transmit button will send the data to ITDC Controller and activate the registered card.
97
98
Window will show all the Alarm devices and status of devices. Alarm devices have to be
registered as alarm devices at outputs (Relays) point type definition under Setup
menu.
Using inactive (All) and active (All) buttons to control all devices.
Individual device can be controlled by right-click on selected device and operation
option of Inactive, Active, Active for 10 seconds, 30 seconds, and 60 seconds menus
are available.
Locate the specific alarm devices or group of devices by using Find function.
Show fresh the alarm device status using Update Alarm Device State button.
Click Close button to exit from Alarm Status window
99
Window will show all the output devices including door locks and show the
status of devices. Output devices have to be registered as normal devices at
outputs (Relays) point type definition under Setup menu.
Using inactive (All) and active (All) buttons to control all output devices.
Locate the specific output devices or group of devices by using Find function.
Fresh the alarm device status using Update Output Device State button.
100
Window will show all doors of the selected fire group including door status and show
the status of door locks. The doors have to be registered as fire group devices at input
point type definition under Setup menu.
101
Using lock (All) and unlock (All) buttons to control all doors in the group.
Individual door can be controlled by right-click on selected device and operation option
of Lock, Unlock, Unlock for 3 seconds, 5 seconds, and 10 seconds menus are
available.
Window will show all the input contact point including door contact and exit button and
show the status of all predefined input points. Input points have to be registered as
normal input point at input normal point definition under Setup menu.
Fresh the input point status using Update Input Device State button.
102
Window show all connection with iTDC controllers enrolled AC Server Setting program
and status of the connections. Those controllers have to be registered as loop definition
at AC Server Setting program.
Click Polling Stop to disconnect data polling. In this case, the data created after
disconnection will be stacked at the controllers memory.
103
104
Individual door control can be performed by right-click on the icons and menu will
provide Lock, Unlock, Unlock 3,5,10 seconds options.
5.8 Search
AC Search is different from report features. AC Search provides list of transactions with
video files. Video file wont be available video system already has been overwritten the
selected transaction video.
From AC Search window, Alarm transaction, Event transaction, and Visitor transaction
search can be selected. Comment also can be searched by AC Server search.
105
Alarm transaction search only provides alarm status transactions and Event search
transaction search provides access granted status transactions.
Alarm / Event Search provide same window of conditions when user click either buttons.
Select the date and time ranges by inputting Start Date / Time and End Date / Time
Name: Card Holders Name as search condition.
Card No.: Card ID number as search condition.
Company: Registered company as search condition
Department: Registered department of a company as search condition
Access Door: Selected doors as search condition
Visitor Search
Visitor Search provides 3 options such as Event & Alarm status transaction, Event status
transaction only, and alarm status transaction only.
Search condition setting is the same way as Alarm / Event search
Comment Search is only available when there are comments from the database. Comment
can be written when right-click is clicked on the AC Server Main program.
106
6 Report
6.1 Card Holder Report
Report features are depended on installed printer on AC Server. Printer driver has to be
installed to use. It does not have to be physical printer. User can create printers virtually by
installing appropriate printer drivers.
The registered user status in Card Holder Management will be shown on the report as a
list. Detail Report will show the users full information including images.
Person ID, Name, Card No. are available as search conditions
The list can be sorted by Person ID, Name, Card No., Department, Title, Register Date,
and Expire Date.
107
Click Print button. If data is found, it will display how it will look when printed.
To obtain print out of this screen, click the Print button located in the top left hand side.
All reports can be converted to variety of files. It can be converted to PDF, HTML, and
Excel file.
Export to PDF: PDF report file is created as appearing in print image. You will need
Adobe Acrobat Reader to view the PDF file. To export to PDF may take a while.
108
The Deleted Card Holder status in Deleted Card Holder Management will be shown on the
report as a list.
Person ID, Name, Card No. and Company are available as search conditions
The list can be sorted by Person ID, Name, Card No., Department, Title, Register Date,
and Expire Date.
Click Print button. If data is found, it will display how it will look when printed.
To obtain print out of this screen, click the Print button located in the top left hand
side.
All reports can be converted to variety of files. It can be converted to PDF, HTML,
and Excel file.
Export to PDF: PDF report file is created as appearing in print image. You will need
Adobe Acrobat Reader to view the PDF file. To export to PDF may take a while.
109
Start Date and End Data have to be set to display the history transactions.
The Event History Report will show the selected dates transaction on the report as a
list. Report includes Date, Time, Area, Floor, Door Name, Reader Name, Card
Holder Name, Company, Department, Card Number, and Status.
Event (Granted) Transaction History Report does not include alarm transactions.
Alarm Transaction Histories can be seen at Alarm History Report
Card Holder Name, Card No., Company, Department, and Doors are available as
search (find) conditions.
110
Click Print button. If data is found, it will display how it will look when printed.
To obtain print out of this screen, click the Print button located in the top left hand side.
All reports can be converted to variety of files. It can be converted to PDF, HTML, and
Excel file.
Export to Excel: Excel report file is created as appearing in print image.
Export to HTML: HTML report file is created as appearing in print image.
Export to PDF: PDF report file is created as appearing in print image. You will need
Adobe Acrobat Reader to view the PDF file. To export to PDF may take a while.
Start Date and End Data have to be set to display the history transactions.
The Alarm History Report will show the selected dates transaction on the report as a
list. Report includes Date, Time, Area, Floor, Door Name, Reader Name, Card Holder
Name, Company, Department, Card Number, and Status.
Alarm Transaction History Report does not include Event (Granted) transactions. Event
(Granted) Transaction Histories can be seen at Event History Report
Card Holder Name, Card No., Company, Department, and Doors are available as
search (find) conditions.
111
Click Print button. If data is found, it will display how it will look when printed.
To obtain print out of this screen, click the Print button located in the top left hand side.
All reports can be converted to variety of files. It can be converted to PDF, HTML, and
Excel file.
Export to Excel: Excel report file is created as appearing in print image.
Export to HTML: HTML report file is created as appearing in print image.
Export to PDF: PDF report file is created as appearing in print image. You will need
Adobe Acrobat Reader to view the PDF file. To export to PDF may take a while.
112
This function searches and prints registered visitors access event status data. This data is
stored in database and the user search and print this data using date and time as basis.
Start Date and End Data have to be set to display the history transactions.
The Visitor Event History Report will show the selected dates transaction on the report
as a list. Report includes Date, Time, Area, Floor, Door Name, Reader Name, Card
Holder Name, Company, Department, Card Number, and Status.
Report provides the options for Event Status only, Alarm Status only, and Both status
combined.
Card Holder Name, Card No., and Doors are available as search (find) conditions.
Click Print button. If data is found, it will display how it will look when printed.
To obtain print out of this screen, click the Print button located in the top left hand side.
113
All reports can be converted to variety of files. It can be converted to PDF, HTML, and
Excel file.
Export to Excel: Excel report file is created as appearing in print image.
Export to HTML: HTML report file is created as appearing in print image.
Export to PDF: PDF report file is created as appearing in print image. You will need
Adobe Acrobat Reader to view the PDF file. To export to PDF may take a while.
7 Time / Attendance
Organizations located in the buildings whose access is controlled by AC Server are able to
receive attendance data of their employees from the server because Time / Attendance data is
able to be driven from access data. The organizations also are able to apply their own working
schedule and business hours when they making attendance report.
7.1 Time / Attendance Time Definition
Time Attendance Time Definition is able for an organization to set daily work hours.
114
115
116
Click Save to save the data and Close to exit the window.
117
118
Create Daily Work Data: Set the period of time to make daily attendance data.
Create Data: Click Create Date button to make data for the given time.
119
120
121
122
AC Server provides monthly T&A data using daily T&A data. Click Create Data to make
monthly T&A data. If user wants to see the created data, click Find button.
123
Individual Time / Attendance Report shows the stored attendance data sorted by
person ID.
124
125
126
127
Check Exclude lunch time from total work time to eliminate lunch break
from total daily working hours.
129
8 Lift Control
8.1 Add Lift Controller at AC Server Setting program
Lift Controller Loop Definition is located on AC Server Setting. Refer Chapter 4 Loop
Definition section.
130
Loop Information
o Loop No.
o IP Address:
o Port:
o Use the loop:
Control Information
o Controller Type must be ITDC_EL if it is for Lift / Elevator Control.
o Type Control Name
o Click Save button to store and Close button to exit.
131
Add (Elevator)
Modify (Elevator)
User can modify the lift definition by adding or
removing floors using add & Delete
buttons.
In
132
Lift (Elevator) definition can be deleted by pressing Delete button from Lift
Definition List window.
8.3 Lift Controller Definition
133
134
This option is used only when the Card Type is 34Bit (Mifare Type).
Select 1 Byte or 4 Byte to calculate the Card number. The default
value is 4 Byte.
o Keybox (Floor Button) Time Schedule: Select time schedule to control
access to the elevator. The default value is Not Use. In this case,
you must read Card to use Lift at reader and then you can use the
accessible floor. But to use Lift without reading Card, select time
schedule to apply lift controller.
For example, if selected Time schedule is set from 09:00 to 18:00,
users can use the lift without reading card for this period. And users
must read card to use lift during the rest of the period.
o Reader mode: Select reader mode to apply the reader.
135
Transmit: After finishing edit of lift / elevator controller definition, user needs to
transmit the changed data to its controller.
Select the Lift / Elevator Controller to be defined the output of the controller.
User can utilize the Find Condition to locate the lift / elevator controller.
136
Only Modify button is available to edit the outputs of the selected controller.
Select Lift Code: Select one lift controller to modify, and then click Modify.
137
Check Lift Code, Loop No., and Controller Address of the selected Lift.
Select Floors.
Select the operating time (OP) for the output. The value for the output is setup in seconds.
00 sec for output will result in no signal. Selecting 01~98 sec will let the output active for
specified seconds. 99 sec means the output active all time.
In general, select the time from 5~10 sec. When the
time is setup from 5~10 sec, the button inside
Elevator must be pressed for 5~10 sec.
Click Save button to store data.
Click Transmit to send to Controller.
Click Close button to finish.
When setup is performed for all device, program, and related data, it is not
active until transmitted to controller. It is possible the transmit function may not
work properly.
Make certain communications is established before using the transmit function.
If the communication isnt correct, the transmit function doesnt work correctly. In
this case, check the communication status.
8.5 Lift Access Group Definition
You can create the Lift group to register user in a group type to use accessible floor.
When register the person, you can allow various Lift group like the group using a whole
floor, or the group using specified floor.
138
139
Select a floor from Available Lift Floor List window and click >> button to
add into Lift / Elevator Access Group and list of floor will be shown at
Selected Lift Floor List
Keep adding floors using >> button to selected lift / elevator access group
definition is satisfied.
Click Save to store the data
Click Close to finish adding Lift / Elevator access group definition.
8.6 Report
Find Condition
140
User can print out the Accessible Floor report without selecting
other items as appropriate.
Click Print button. If data is found, it will display how it will look when
printed. The following screen will appear.
File Conversion
Print: It will print out Accessible Lift Floor by individually based on the Lift Access
Group registered on person information.
141
142
User can print out the Lift Event History Report without selecting other items as
appropriate.
To obtain print out of this screen, click the Print button located in the top left hand
side.
143
Chapter
1. Time Zone: See Time Zone Definition under Access Control, Chapter 4.2.1.
2. Time Schedule: See Time Schedule Definition under Access Control, chapter 4.2.2.
3. Group: See Access Group Definition under Access Control, chapter 4.3.
4. Card Holder: See Card Holder Management under Access Control, chapter 4.4.
5. Modify Card: See Modify Card (ID) Management under Access Control, chapter 4.5.
6. Delete Card: See Deleted Card (ID) Management under Access Control, chapter 4.6.
7. Visitor: See Visitor Management under Access Control, chapter 4.7.
8. Search: See Search under View, chapter 5.8.
9. Map: See Map Viewer under View, chapter 5.7.
10. Door Status: See Door Status under View, chapter 5.1.
11. DVR
AC Server is able to watch real time video from DVRs which are predefined AC Server
Setting program.
144
12.2
Camera Control
Click a video channel on the Live Popup window.
The No. of selected camera will show next to camera control button.
Click Camera Control button.
145
12.3Camera Control
146
147
148
149