Professional Documents
Culture Documents
Specification No:
Rev no:
WBS No:
Product
Capacity
Pressure
TPH
Temperature
bar(g)
No of Units
2
Deg C
GENERAL NOTES
Outdoor
Vendor Standard
ASME Section VIII Div.1
meters above mean sea level
Climatic Conditions
Ambient Temp. (Deg. C)
Relative Humidity (%)
Area Classification
Site Location
TECHNICAL PARAMETERS
Description
Chemical to be dosed
Motors
Lubrication
Tank Parameters
Quantity Required
Minimum Storage capacity
Material of dissolving
basket, removable type
Material of Tank
MOC Thickness
Type of Tank Bottom
Pump Parameters
Quantity Required
Capacity
Type - Variable Stroke
Stroke Control
Phosphate Dozing
Trisodium Phosphate (Na3PO4.12H2O)
1% concentration
As per EMS 1 (D14-TB-CS-21057)
To be suitable to withstand max. & min.
ambient conditions
Application
Pressure of water at inlet
Temp. of water at inlet
Electrical Design Temp.
Two
Liters
SS 304
3 mm
Dished End
Three
Liters
Reciprocating plunger type stroke
adjustable
Manually with scale having 0 to 100%
stroke adjustment indication.
Steam Drum
kg/cm2 (g)
deg. C
deg. C
1
Reflex
Level
Yes (Ext. Float type)
Switch
Breather Box
No
Yes
Motorised
Yes
Flow rate
Discharge Pressure
Normal
(kg/cm2 (g))
MOC of Wetted parts
Motors
Relief Valve
SS 316
IP 55
SS 316
Piping Details
Pipe
Size
MOC (with Desc.)
Sch/ Rating
Type
Suction
25 NB
SS-304
Sch 40
ERW
Valves
Discharge
25 NB
SS-304
Sch 80
Seamless
Suction
25 NB
SS-304
800#
Ball
Discharge
25 NB
SS-304
800#(<110 kg/cm2 )
Gate
Flanges
Suction
25 NB
SS 304
150 #
SORF
Discharge
25 NB
SS 304
900#(<110 kg/cm2)
WNRF
Page1 of 12
Thermax Limited
Boilers & Heaters Groups
D1 BLOCK, PLOT # 7/2, MIDC, R.D. Aga Road, Chinchwad, PUNE - 411019, INDIA
Customer:
Consultant:
Proposal No:
OC No:
Specification No:
Rev no:
WBS No:
Product
Capacity
Pressure
TPH
Temperature
bar(g)
Deg C
No of Units
2
14)
15)
16)
17)
18)
19)
20)
21)
A
A
A
A
A
A
A
A
Tank top lid shall be provided with observation hole of boro silicate glass.
Mechanical design concentration shall be 10% for all wetted parts.
No. of strokes /minutes shall not exceed 100 for selected pumps.
H.P. dosing pump shall be capable of stroke adjustment (0-100%) with indication on scale graduated to read quantity directly.
Exhaust piping of pressure relief valve in dosing pump discharge shall be individually connected to the mixing cum metering tank.
The relief valve set pressure shall be minimum 25% more than the maximum discharge pressure of the pump.
Electric motor ratings not including motor service factor shall be atleast equal to 110% of the rated power.
Level gauge vent shall be provided with vent plug and drain connection isolation shall be needle type valve.
One no. pressure guage per pump in discharge line with sealed diapragm type 6 inch size, SS 316 bourdon, 1/2 inch NPT connection
along with 2 isolation valves.
5)
A
One no. level switch of external cage floate type for level very low alarm or interlocking purpose to be provided. The level switch should
have one SPCO contact of rating 230 VAC 5 Amp. The cable entry for the level switch should be 1/2 inch NPT(F).
Level swicth housing should be weather proof IP 65. Level switch should be flabge-mounting type and able to withstand over pressure
of 130 % of working pressure as a minimum.
6) Approved make of components:
A
Pump-plunger type : Metachem / Veekay pumps / Asia LMI.
A
PRV : Metachem/ Vekay pumps/ BHEL/ Audco? Fisher Xemox
A
Pressure gauges : H. Guru / GIC / AN Instruments / Mass of precision
A
Level gauge : Pune Techtrol
A
Drive Motorsn : Siemens/ CGL/ Kirloskar
A
Strainers : Triveni equipments / J N Marshall
A
Valves : BDK / Steel strong / Virgo.l
A
Level switch : Revati/ Pune Techtrol.
Page2 of 12
Thermax Limited
Boilers & Heaters Groups
D1 BLOCK, PLOT # 7/2, MIDC, R.D. Aga Road, Chinchwad, PUNE - 411019, INDIA
Customer:
Consultant:
Proposal No:
OC No:
Product
Specification No:
Rev no:
WBS No:
Capacity
Pressure
TPH
Temperature
bar(g)
Deg C
No of Units
2
PROJECT REQUIREMENTS
1)
A
Suitability for area classification.
2)
A
Special tools/ tackels for maintanence, erection & commissioning.
3)
A
Commissioning spares.
4)
A
Compliance to customer's/ consultant's attached specs.
5)
A
Compliance to attached P&I diagrams for this job.
6)
A
Tag number for complete system, pumps, motors & agitators as per P&I.
7)
A
Spark proof construction for coupling guard.
8)
A
Commissioning tools.
9)
A
Spares for 2 years operation with list (give separate price).
10)
A
Seaworthy packing, preservation & preparation for shipment.
11)
A
Compliance to EMS1 (D14-TB-CS-21057).
ADDITIONAL REQUIREMENTS
1)
2)
3)
Page3 of 12
Thermax Limited
Boilers & Heaters Groups
D1 BLOCK, PLOT # 7/2, MIDC, R.D. Aga Road, Chinchwad, PUNE - 411019, INDIA
Customer:
Consultant:
Proposal No:
OC No:
Product
Specification No:
Rev no:
WBS No:
Capacity
Pressure
TPH
Temperature
bar(g)
Deg C
No of Units
2
MADE
CHKD APPROV
DESCRIPTION
BY
BY
ED BY
All revisions are marked in the right column by a number in bold & italics. The respective revision is also shown in bold & italics.
dd/mm/yyyy
DATE
Page4 of 12
ermax Limited
& Heaters Groups
No of Units
2
REV.
REV.
Page5 of 12
ermax Limited
& Heaters Groups
No of Units
2
REV.
REV.
REV.
REV.
Page6 of 12
ermax Limited
& Heaters Groups
No of Units
2
REV.
REV.
REV.
REV.
REV.
REV.
Page7 of 12
ermax Limited
& Heaters Groups
No of Units
2
REV.
Page8 of 12
[ ] IS 48
[ ] Required, [
[ ] Required, [
[ ] Required, [
[ ] Required, [
[ ] Required, [
[ ] Required, [
required
[ ] Required, [
] Not required, [
] Not required, [
] Not required, [
] Not required, [
] Not required
] Not
] Not required
] Vendor Std.
] Vendor Std.
] Vendor Std.
] Vendor Std.