Professional Documents
Culture Documents
y
descriptio
n
Dozer
250 Euro/day
Engine Model
Cat C4.4 ACERT
Power - Net 77.6 kW
Displacement
4.4 L
Bore 105.0 mm
Stroke127.0 mm
Rated Net Power @ 2,200 rpm SAE J1349 77.6 kW
Rated Net Power @ 2,200 rpm ISO 9249/EEC 80/1269
77.6 kW
Note Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission
standards.
TRANSMISSION
Drive Pumps 1
Track Motors 2
Relief Valve Settings
48500.0 kPa
Maximum Travel Speed Forward
9.0 km/h
Maximum Travel Speed Reverse
10.0 km/h
RIPPER
Type Parallelogram
Number of Shanks 3
Height
165.0 mm
Weight
554.0 kg
Maximum Digging Depth 337.5 mm
Maximum Reach at Ground Line 555.0 mm
Maximum Ground Clearance Under Tip 448.0 mm
Overall Width
1710.0 mm
WINCH
Weight
610.0 kg
Dumper truck
150 Euro/day
Engine Model
Cat CT13 Engine
Horsepower @ 1700 rpm 365 - 475 hp (268 - 349 kW)
Bore 12.6 cm
Engine Type Diesel, 4-Cycle
Configuration
Inline 6-Cylinder
Stroke16.6 cm
Valves4 Valves Per Cylinder, Overhead Cam Actuated
Peak Torque @ 1000 rpm 1250 - 1700 lb-ft (1695 - 2305 Nm)
TRANSMISSION
Maximum Gross Input Power
410.0 kW
Maximum Gross Input Torque
2400.0 Nm
Transmission ModelCat CX31 Automatic Transmission
Speeds
6 forward/1 reverse
Torque Converter: Cast aluminum design with lock up clutch
Clutches:
Electro-hydraulic fully modulated, oil cooled, multidisc
Maximum Input Speed: 2500 rpm
Length
896.0 mm
Overall Length with Retarder Option
1000.0 mm
Overall Weight (approx.) 411.0 kg
Overall Weight with Retarder Option
494.0 kg
Power Take-Of
Two side locations and a Cat exclusive high output rear PTO
Rear PTO Capacity (rotation opposite of engine, at 1.25 engine speed) 1356.0 Nm
Side PTO Capacity (rotation same as engine, ratio determined by PTO adaptor)
950.0 Nm
Excavator
390 Euro/day
Engine Model
Cat C9.3 (ATAAC)
Net Flywheel Power
286.0 hp
Net Power - SAE J1349
308.0 hp
Bore 4.53 in
Stroke5.87 in
Displacement
568.0 in3
Gross Power - SAE J1995 328.0 hp
WEIGHTS
Operating Weight 82000.0 lb
Maximum Operating Weight
82000.0 lb
Minimum Operating Weight
81600.0 lb
SWING MECHANISM
Swing Speed 9.0 RPM
Swing Torque
80394.0 lb ft
DRIVE
Maximum Travel Speed 3.0 mph
Maximum Drawbar Pull 66319.0 lb
HYDRAULIC SYSTEM
Main System - Maximum Flow (Total) 150.0 gal/min
Swing System - Maximum Flow 73.0 gal/min
Maximum Pressure - Equipment - Heavy Lift 5366.0 psi
Maximum Pressure - Travel
5076.0 psi
Maximum Pressure - Swing
4061.0 psi
Pilot System - Maximum Flow
7.4 gal/min
Dragline
150 Euro/day
Landfill compactor
300 Euro/day
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
WEIGHTS
Operating Weight 40917.0 kg
CAB STANDARD
Operator Sound Pressure Level (ISO 6396)
73.0 dB(A)
Machine Sound Power Level (ISO 6395)113.0 dB(A)
CAB SUPPRESSION
Operator Sound Pressure Level (ISO 6396)
72.0 dB(A)
Machine Sound Power Level (ISO 6395)110.0 dB(A)
OPERATING SPECIFICATIONS
Maximum Operating Weight (Tier 4 Final/Stage IV) Multiple Blade and Wheel
Oferings
40917.0 kg
Maximum Operating Weight (Tier 3 Final/Stage IIIA equivalent) Multiple Blade and
Wheel Oferings
40454.0 kg
DIMENSIONS (APPROXIMATE)
Height to Top of Cab with A/C
4568.0 mm
Height to Top of Exhaust Pipe
4439.0 mm
Height to Top of Hood
3312.0 mm
Ground Clearance to Bumper
960.0 mm
Hitch to Center Line of Front Axle
1850.0 mm
Wheelbase 3700.0 mm
Width over Wheels 3800.0 mm
Center Line of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
3096.0 mm
Center Line of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
2860.0 mm
Height to ROPS/Canopy 4274.0 mm
Height to Top of Cab with Strobe 4765.0 mm
Length with Blade on Ground - (includes rear radiator guard) (straight blade)
8715.0 mm
Turning Radius - Inside of Wheels
2797.0 mm
Ground Clearance 642.0 mm
HYDRAULIC SYSTEM STEERING
Bore 114.3 mm
Maximum System Flow
170 L/min @ 1,950 rpm (44.9 gal/min @ 1,950 rpm)
Steering Pressure Limited 24000.0 kPa
Steering System - Circuit Double Acting - End Mounted
Steering System - Pump Piston - Variable Displacement
Stroke576.0 mm
Vehicle Articulation Angle 86.0 Degrees
Utility compactor
290 Euro/day
Rated Operating Load @ Full Turn, Forks (EN 474-3:2006, Firm and Level Ground,
1.25 Stability and 500 mm [20 in] Load Center)
2355.0 kg
Rated Operating Load @ Full Turn, Forks (SAE J1197, Load Center @ Tine Mid-Point,
1120 mm [44 in] Tines) (50% FTSTL) 1381.0 kg
Rated Operating Load @ Full Turn, Forks (SAE J1197, Load Center @ Tine Mid-Point,
1220 mm [48 in] Tines) (50% FTSTL) 1324.0 kg
Rated Operating Load Straight Back, Forks (SAE J1197, Load Center @ Tine MidPoint, 1120 mm [44 in] Tines) (50% FTSTL) 1772.0 kg
Rated Operating Load Straight Back, Forks (SAE J1197, Load Center @ Tine MidPoint, 1220 mm [48 in] Tines) (50% FTSTL) 1733.0 kg