You are on page 1of 2

VENTOPACK pre-formed

open mouth bags filling system


- Capacity up to 3000 bags/hour

- Configuartion with 5x2 bags per


layer or 6x2 bags per layer

Copyright 2014 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth, VENTOMATIC is a (registered) trademark of FLSmidth
A/S. This brochure makes no offers, representations or warranties (express or implied), and information and data
contained in this brochure are for general reference only and may change at any time.

FLSmidth Ventomatic S.p.A


via G. Marconi, 20
24030 Valbrembo (Bergamo) Italy
tel. +39 035 468 311
fax +39 035 460 838
vento@flsmidthventomatic.com

www.flsmidthventomatic.com

C 05-14-600-20-ENG

- High efficiency and reliability

Bagging machines

Main features

Ventomatic VENTOPACK filling system


is the perfect solution for filling powdery or
granular products into pre-formed open
mouth bags.
It is available in two models:
- VENTOPACK ABF with fully automatic
bag applicator
- VENTOPACK MBF with semi-automatic
bag applicator.
The machine is usually equipped with
Ventomatic BDB net weigher to provide
the most reliable product feeding, the
optimum weigh accuracy and the
maximum throughput.

The VENTOPACK ABF is equipped with


- a double weighing system to
consinstently achieve productions in the
range of up to 1200 bph;
- two empty bags magazines, for long
unmanned operation of the machine;
- an empty bags pick up, mouth opening
and spout application device, designed
for high performance;
- Vibrating saddle for compaction of
powdery materials.

OUTPUT

VENTOPACK ABF is a completely


automatic solution. The operator
presence is needed only to refill the
empty bags magazines. Different
bags formats can be worked in the
machine without the need of
complicated and elaborated set-up.

The different bags and products


settings are stored in the operator
panel. The change over is done in a
matter of few minutes and does not
require any manual adjustment.
FLSmidth Ventomatic VENTOPACK
machines are designed to operate

with almost any kind of product, thanks


to the high range of materials of
constructions available for the contact
parts. The most common solutions are
with painted carbon steel, AISI 304 and
AISI 316, but more corrosion resistant
materials can be used.

Empty bags pick-up mechanism

Bag top conveyor

Swiveling spout

VENTOPACK ABF filling system

VENTOPACK ABF and MBF share the


same feeding and weighing system,
the filling spout and the full bags exit
conveyor.
Our customers can choose among
several different sealing solutions.
The VENTOPACK machines can be
equipped with sewing heads, hot
sealing systems, tape over sewing,
pinch top and others.

Operator panel
VENTOPACK MBF filling system

VENTOPACK MBF

VENTOPACK ABF

Up to 800 bph

up to 1200 bph

BAG CAPACITY

10-50 kg

BAG DIMENSIONS

Pillow

Gusseted

WIDTH

360 - 800 mm

260 - 700 mm

LENGTH

500 - 1300 mm

500 - 1300 mm

GUSSET

up to 120 mm

BAG TYPE

Preformed open mouth with or without gusset

BAG MATERIAL

Paper, aluminum foil paper, polyethylene foil paper, polyethylene, polypropylene

BAG SEALING

Simple and double sewing, sewing with fold, sewing and hot glueing,
tape over sewing, hot sealing, Pinch-top

The operator interface has a wide 9


color touch-screen. It is simple and user
friendly.
Its features are:
- Manual controls of each
movement;
- Execution of complete machine
check;
- 3 access levels (password protected
for operators, maintenance and
manager level).

You might also like