Professional Documents
Culture Documents
Conti-Master-Pump CMP-1
7.5A-38010-A03
Conti-Master-Pump CMP-1
- ideal for applications where hydraulic energy is available
(e.g. hydraulic excavators)
- can be combined with all PowerMaster pump tubings
- the patented oscillating cylinder is self-reversing and does
not need any external signals
- the oscillating drive allows for high outputs with low oil
consumption
- the oscillating cylinder has got a big pressure range for
den hydraulic connection
- the sound level is on a low level (< 70 dB(A))
Technical Data
Pressure range hydraulic oil: ............... 14 - 83 bar*
Flow quantity range: ............................. 8 - 12 l/min
Operating temperature: ........................ - 20 C to + 60C
Oil consumption: ................................... approx. 0.3 l/ cycle
Oil viscosity: ........................................... 22 mm/s (at 40C)
Grade of filtration: ................................. 10 m
* Caution: The inlet pressure must be set according to the
maximum admissible material pressure.
Ratio and output depend on the pump tube used.
For pump tube model no. 084997, e.g., the following values
are valid:
Pressure ratio:.................................................... 10 : 1
Output per double stroke:................................. approx.30 cm
Output pressure:.................................................max. 525 bar
Output at 5 l/min and 40 bar oil pressure: ........ 480 cm/min
Output at 7 l/min and 50 bar oil pressure: ........ 620 cm/min
Pos.
Designation
1
oscillating cylinder, complete
2
spacer bar M 12
3
hexagon nut M 12C
4
washer A 13.0 C
5
adapter
6
pumpe tube
* for pump 509-32178-1
Qty.
Part no.
1
4
4
4
1
1
235-13183-1
409-24709-1
207-12136-4
209-13011-9
409-24503-1
084997*
Page 1 of 4
LINCOLN GmbH & Co. KG P.O. Box 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Technical Description
Conti-Master-Pump CMP-1
7.5A-38010-A03
Operating Mode
If during the extraction there is a stop in movement, for example, due to a stop of the oil flow or a too high counterpressure, the cylinder also retracts again. The cylinder activates
the flanged pump tube. Grease is dispensed through the
pump tube via connection Px into the centralized lubrication
system.
Page 2 of 4
LINCOLN GmbH & Co. KG P.O. Box 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Technical Description
Conti-Master-Pump CMP-1
7.5A-38010-A03
Settings
Page 3 of 4
LINCOLN GmbH & Co. KG P.O. Box 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Technical Description
Conti-Master-Pump CMP-1
7.5A-38010-A03
Page 4 of 4
LINCOLN GmbH & Co. KG P.O. Box 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259