You are on page 1of 1

R. Prabhakara, K. U. Muthu, and R.

Meenakshi

358

[10]

R. I. Gilbert, Deflection Calculation for RC StructuresWhy We Sometimes Get It Wrong, ACI Structural Journal,
96 (1999), pp. 10271032.

[11]

S. K. Nayak and D. Menon, Improved Procedure for Estimating Short-Term Deflections in RC Slabs, Indian
Concrete Journal, August 2004, pp. 1925.

[12]

Peter H. Bischoff, Re-Evaluation of Deflection Prediction for Concrete Beams Reinforced with Steel and Fiber
Reinforced Polymer Bars, Journal of Structural Engineering , ASCE , May 2005, pp. pp. 752767

[13]

B. V. Rangan, Control of Deflection by Allowable SpanDepth Ratios, ACI Journal, 79 (1982), p. 372.

[14]

P. Desayi, K. U. Muthu, and K. Amarnath, Deflection Control of Doubly Reinforced beams, International Journal of
Structures, 9 (1989), pp. 4357.

[15]

J. S. Grossman, Simplified Computations for Effective Moment of Inertia , Ie, and Minimum Thickness to Avoid
Deflection Computations, ACI Structural Journal , 78 (1981), pp. 423439.

[16]

K. Y. Chang and S. J. Hwang Practical Estimation of Two-Way Slab Deflections, ACI Structural Journal, 101
(1996), pp. 150159.

[17]

B. S. Choi and A. Scanlon. Monte Carlo Simulation of Immediate and Time-Dependent Deflections of Reinforced
Concrete Beams and Slabs, ACI Structural Journal, 101 (1985), pp. 633641.

[18]

K. B. Bondy, ACI Code Deflection Requirements Time for a Change?, Serviceability of Concrete , SP225 eds., F.
Barth, R. Frosch, H. Nassif, and A. Scanlon. Farmington Hills, Michigan: American Concrete Institute, pp.133145.

[19]

S. Andrew and H. L. Young, Unified Span-to-Depth Ratio Equation for Nonprestressed Concrete Beams and Slabs,
ACI Structural Journal, 103 (2006), pp. 142148.

[20]

B. A. Lakshmikantha, Experimental Investigations on High Performance Concrete Beams, M. Tech. Thesis, M.S.
Ramaiah Institute of Technology, 2004.

[21]

Anima, Flexural Behaviour of High Strength Concrete Beams, M. Tech. Thesis,


Technology, 2002.

[22]

M. Y. Ko, S. W. Kim, and J. K. Kim, Experimental Study on the Plastic Rotation Capacity of Reinforced HSC
Beams, Magazine of Concrete Research, 2001.

[23]

K. E. Leslie, K. S. Rajagopalan, and N. J. Everard, Flexural Behaviour of HSC Beams, ACI Journal , 1976, pp. 517
521.

[24]

F. F. Wafa and S. A. Ashour, Minimum Flexural Reinforcements of HSC Beams, SP 172-30, 1996.

[25]

S. W. Shin, S. Gosh, and J. Moreno, Flexural Ductility of Ultra High Strength Concrete Members, ACI Structural
Journal, 1989, pp. 394400.

[26]

S. S. Adwan and J. G. L. Munday, High Strength Concrete: An Investigation of the Flexural Behaviour of HSC
Beams, Structural Engineering, 75 (1997), pp. 155121.

[27]

S. H. Ahmad and R. Barker, Flexural Behavior of Reinforced High-Strength Lightweight Concrete Beams, ACI
Structural Journal, 88 (1991), pp. 6977.

[28]

L. F. A. Bernardo and S. M. R. Lopes, Flexural Ductility of High Strength Concrete Beams, Structural Concrete,
4(2003), pp. 135152.

[29]

S. H. Ahmad and B. Jamie, Flexural Behavior of Doubly Reinforced High Strength Lightweight Concrete Beams with
Web Reinforcement, ACI Structural Journal, 88(3) (1991), pp. 351358.

The Arabian Journal for Science and Engineering, Volume 32, Number 2B

M.S. Ramaiah Institute of

October 2007

You might also like