Professional Documents
Culture Documents
On version 4.1 and 4.2 a well know Cisco bug may appear. Malformed radius
packet when the ACS server send the response to the Opnet appliance. This
result to a bad authentication error on the AppResponse Xpert solution.
All blue part are the .csv files that you need to create. Those CSV file will be
uploaded to the ACS box with RDBSM.
Note:
You need to restart the services severals times to apply the configuration change
on the ACS v4.2 (SE).
Prerequisites
-
Patch ACS
Download ApplAcs_4.2.0.124.17.zip from Cisco Web Site
Unzip the file
Launch startserver.bat
Go to ACS web interface and System Configuration Appliance Upgrade status
Configuration the FTP server. Be sure that the name of file is accountActions.csv
Wait several minutes the ACS server will restart the services.
Wait several minutes the ACS server will restart the services.
SequenceId,Priority,UserName,GroupName,Action,ValueName,Value1,Value
2,Value3,DateTime,MessageNo,ComputerNames,AppId,Status
1,2,,,352,NetworkPhysicsAttribute,7119,33,string,16/09/201110:00,,,,0
2,1,,,355,,,,,16/09/201110:00,,,,0
Wait several minutes the ACS server will restart the services.
Set attribute
Prepare a blank txt file with your favourite text editor
Insert into this file the following text:
SequenceId,Priority,UserName,GroupName,Action,ValueName,Value1,Value
2,Value3,DateTime,MessageNo,ComputerNames,AppId,Status
1,2,,,353,NetworkPhysicsAttribute,7119,33,MULTIOUT,16/09/201110:00,,,,0
2,1,,,355,,,,,16/09/201110:00,,,,0
Wait several minutes the ACS server will restart the services.
Interface configuration
After adding an AAA Client IP address, the new Vendor should appear to Interface
configuration:
Group setup
To assign authorization level to a group, add or edit a User Group.
Select Check box under RADIUS (Network-Physics) Attribute and type the right
authorization level for OPNET probe.