Professional Documents
Culture Documents
Web Site
ARGENTINA
0800-333-3733
www.samsung.com/ar
BRAZIL
0800-124-421
4004-0000
www.samsung.com/br
CHILE
800-SAMSUNG(726-7864)
www.samsung.com/cl
COLOMBIA
01-8000112112
www.samsung.com.co
COSTA RICA
0-800-507-7267
www.samsung.com/latin
ECUADOR
1-800-10-7267
www.samsung.com/latin
EL SALVADOR
800-6225
www.samsung.com/latin
GUATEMALA
1-800-299-0013
www.samsung.com/latin
HONDURAS
800-7919267
www.samsung.com/latin
JAMAICA
1-800-234-7267
www.samsung.com/latin
PANAMA
800-7267
www.samsung.com/latin
PUERTO RICO
1-800-682-3180
www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
www.samsung.com/latin
NICARAGUA
00-1800-5077267
www.samsung.com/latin
MEXICO
01-800-SAMSUNG(726-7864)
www.samsung.com/mx
1-800-SAMSUNG(726-7864)
www.samsung.com/latin
VENEZUELA
0-800-100-5303
www.samsung.com/latin
LCD TV
user manual
IMPORTADO POR:
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
www.samsung.com.br
Model
Serial No.
BN68-01977B-00
Book_650_BN68-01977B_00L02.indb 1
2009-03-28 2:06:10
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the brightness and contrast when displaying still images.
Book_650_BN68-01977B_00L02.indb 1
2009-03-28 2:06:10
English
Contents
General Information
Picture Control
List of Features......................................................................2
Accessories...........................................................................2
Viewing the Control Panel.....................................................3
Viewing the Connection Panel...............................................4
Remote Control.....................................................................6
Installing Batteries in the Remote Control.............................6
Connections
Connecting VHF and UHF Antennas.....................................7
Connecting Cable TV............................................................7
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via HDMI...........................................8
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via DVI..............................................9
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via Component cables......................9
Connecting a VCR...............................................................10
Connecting an Amplifier / DVD Home Theater....................10
Connecting a Camcorder....................................................11
Connecting a PC.................................................................12
Operation
Viewing the menus..............................................................13
Plug & Play Feature............................................................14
Sound Control
Configuring the Sound Menu...............................................21
Setup
Configuring the Setup Menu................................................22
Viewing Picture-in-Picture...................................................24
Input
Configuring the Input Menu.................................................24
Appendix
Troubleshooting...................................................................25
Wall Mount Kit Specifications (VESA).................................26
Using the Anti-Theft Kensington Lock.................................26
Securing the Installation Space...........................................27
Securing the TV to the Wall.................................................27
Specifications......................................................................28
Channel Control
Configuring the Channel Menu............................................15
Managing Channels............................................................16
License
TruSurround HD, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Symbol
N
Note
One-Touch Button
TOOL Button
English -
Book_650_BN68-01977B_00L02.indb 1
2009-03-28 2:06:11
General Information
N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
List of Features
Accessories
Power Cord
Owners Instructions
Cleaning Cloth
Stand Base
Stand Body
English -
Book_650_BN68-01977B_00L02.indb 2
2009-03-28 2:06:11
21
English -
Book_650_BN68-01977B_00L02.indb 3
2009-03-28 2:06:12
Power Input
N The product colour and shape may vary depending on the model.
1 AUDIO OUT [R-AUDIO-L]
Connects to the audio input jacks on your Amplifier/Home theater.
2 HDMI IN 1(DVI), 2
Connects to the HDMI jack of a device with an HDMI output.
N No sound connection is needed for an HDMI to HDMI connection.
N What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
N Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.
3 PC/DVI AUDIO IN
Connect to the audio output jack on your PC.
DVI audio outputs for external devices.
4 PC IN
Connect to the video output jack on your PC.
N If your PC supports an HDMI connection, you can connect this to the HDMI IN 1 (DVI) or 2 terminal.
N If your PC supports a DVI connection, you can connect this to the HDMI IN 1 (DVI) terminal.
5 SERVICE
Connector for service only.
English -
Book_650_BN68-01977B_00L02.indb 4
2009-03-28 2:06:12
6 AV IN [VIDEO] / [R-AUDIO-L]
Video and audio inputs for external devices, such as a camcorder or VCR.
7 ANT IN
Connects to an antenna or cable TV system.
8 KENSINGTON LOCK (depending on the model)
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
N The location of the Kensington Lock may be different depending on its model.
9 H (HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
N Using the sound function is restricted when connecting headphones to the TV.
N Prolonged use of headphones at a high volume may damage your hearing.
N You will not hear sound from the speakers when you connect headphones to the TV.
N The headphone volume and TV volume are adjusted separately.
0 COMPONENT IN 1, 2
Connects Component video / audio.
! SERVICE
Connector for service only.
English -
Book_650_BN68-01977B_00L02.indb 5
2009-03-28 2:06:12
Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV.
N The performance of the remote control may be affected by bright light.
N The product color and shape may vary depending on the model.
3
4
6
7
$
%
^
&
*
9
0
)
a
English -
Book_650_BN68-01977B_00L02.indb 6
2009-03-28 2:06:12
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see Antennas with 300
Flat Twin Leads below.
If your antenna has one lead that looks like the diagram to the right, see Antennas with 75
Round Leads.
If you have two antennas, see Separate VHF and UHF Antennas.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
UHF
VHF
ANT IN
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
ANT IN
ANT OUT
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
English -
Book_650_BN68-01977B_00L02.indb 7
2009-03-28 2:06:13
Incoming cable
TV Rear
Splitter
RF (A/B) Switch
Cable Box
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
N This terminal might be labeled ANT IN, VHF IN or simply, IN.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4. Connect an RF cable between the ANT OUT terminal on the cable box and the BIN terminal on the RF(A/B) switch.
5. Connect another cable between the other OUT terminal on the splitter and the AIN terminal on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
After you have made this connection, set the A/B switch to the A position for normal viewing. Set the A/B switch to the B
position to view scrambled channels. (When you set the A/B switch to B, you will need to tune your TV to the cable boxs
output channel, which is usually channel 3 or 4.)
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
1. Connect an HDMI Cable between the HDMI IN 1 (DVI) or 2 jack on the TV and the HDMI jack on the DVD / Blu-ray Player or
Cable Box / Satellite receiver (Set-Top Box).
N What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
English -
Book_650_BN68-01977B_00L02.indb 8
2009-03-28 2:06:13
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device.
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1 (DVI) jack on the TV and the DVI jack on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the PC/DVI AUDIO IN jack on the TV and the DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box).
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
N When using an HDMI / DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to
your TV.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
English -
Book_650_BN68-01977B_00L02.indb 9
2009-03-28 2:06:14
Connecting a VCR
TV Rear Panel
English - 10
Book_650_BN68-01977B_00L02.indb 10
2009-03-28 2:06:15
Connecting a Camcorder
Using a Video Cable
TV Rear Panel
Camcorder
1. Connect a Video Cable between the AV IN [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2. Connect Audio Cables between the AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
N Each Camcorder has a different back panel configuration.
N When connecting a Camcorder, match the color of the connection terminal to the cable.
HD Camcorder
1. Connect an HDMI Cable between the HDMI IN 1 (DVI) or 2 jack on the TV and the HDMI OUT jack on the camcorder.
English - 11
Book_650_BN68-01977B_00L02.indb 11
2009-03-28 2:06:15
Connecting a PC
Using a D-Sub Cable
TV Rear Panel
PC
PC
PC
English - 12
Book_650_BN68-01977B_00L02.indb 12
2009-03-28 2:06:17
Operation
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
MENU Button
RETURN Button
EXIT
2. The main menu is displayed on the screen. Its left side has the following icons: Picture,
Sound, Channel, Setup, Input.
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
UMove
EEnter
RReturn
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
6. Press the or button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
UMove
Brightness
EEnter
RReturn
Help icon
7. Press the ENTERE button to complete the configuration. Press the EXIT button to exit.
English - 13
Book_650_BN68-01977B_00L02.indb 13
2009-03-28 2:06:17
English - 14
Book_650_BN68-01977B_00L02.indb 14
2009-03-28 2:06:18
Channel Control
Configuring the Channel Menu
Antenna Air / STD / HRC / IRC
TV
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
N STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point, the signal source has been selected.
: Air
Auto Program
Channel List
Sound
Fine Tune
Color System
: Auto
Channel
Setup
Input
Auto Program
Channel
Picture Antenna
UMove
EEnter
RReturn
First, select the correct signal source (Air, STD, HRC, or IRC).
N The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two
minutes.
N Press the ENTERE button at any time to interrupt the memorization process and return to the Channel menu.
N To stop the search before it has finished, press the ENTERE button with Stop selected.
Channel List
For detailed procedures on using the Channel List, refer to the Managing Channels instructions.
O You can select these options by simply pressing the CH LIST button on the remote control.
Fine Tune
Use fine tuning to manually adjust a particular channel for optimal reception.
N If you do not store the fine-tuned channel in memory, adjustments are not saved.
N * will appear next to the name of fine-tuned channels.
N To reset the fine tuning setting, press the button to select Reset, then press the ENTERE button.
English - 15
Book_650_BN68-01977B_00L02.indb 15
2009-03-28 2:06:18
Managing Channels
Using the Channel List, you can conveniently lock/unlock or add/delete channels
Channel List
Add / Delete
Using the Channel List, you can add channels.
1. Press the CH LIST button.
2. Move to the # field by pressing the , , or button, select a channel to be added,
and press the ENTERE button to add the channel.
N If you press the ENTERE button again, the c symbol next to the channel disappears
and the channel is not added.
Lock / Unlock
Air
1 / 10
Ch.
Air 2
Air 3
Air 4
Air 5
Air
Air
Air
This feature allows you to prevent unauthorized users, such as children, from watching
c
Air
9
unsuitable programmes by muting out video and audio.
c
Air
10
N \ is active when Child Lock is selected to On. (refer to page 22)
Air
11
c
1. Press the CH LIST button.
# Add
\ Lock
2. Move to the \ field by pressing the , , or button, select a channel to be locked,
n Move
E Enter
and press the ENTERE button.
CH Page
R Return
N The PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu.
N If you press the ENTERE button again, the c symbol next to the channel disappears and the channel lock is cancelled.
N A blue screen is displayed when Child Lock is activated.
N Select On or Off in Child Lock to easily turn the channels which selected on \ to be active or inactive.
English - 16
Book_650_BN68-01977B_00L02.indb 16
2009-03-28 2:06:18
Picture Control
Configuring the Picture Menu
Mode
TV
You can select the type of picture which best corresponds to your viewing requirements.
T Press the TOOLS button to display the Tools menu. You can also set the picture mode
by selecting Tools Picture Mode.
Dynamic
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
UMove
EEnter
RReturn
Advanced Settings
Samsungs new TVs allow you to make even more precise picture settings than previous
models.
N Advanced Settings is available in Standard or Movie mode.
N In PC mode, you can only make changes to Gamma and White Balance from among
the Advanced Settings items.
Black Tone Off / Dark / Darker / Darkest
TV
Advanced Settings
: Off
Dynamic Contrast
: Medium
Gamma
: 0
Sound
Color Space
: Native
White balance
Channel Flesh Tone
: 0
Edge Enhancement : On
Setup
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast Off / Low / Medium / High
Input
UMove
EEnter
RReturn
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)
Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most
natural color.
Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
Native: Native Color Space offers deep and rich color tone.
White Balance
You can adjust the color temperature for more natural picture colors.
R-Offset: Adjusts the red color darkness.
G-Offset: Adjusts the green color darkness.
B-Offset: Adjusts the blue color darkness.
R-Gain: Adjusts the red color brightness.
G-Gain: Adjusts the green color brightness.
B-Gain: Adjusts the blue color brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.
N Changing the adjustment value will refresh the adjusted screen.
English - 17
Book_650_BN68-01977B_00L02.indb 17
2009-03-28 2:06:19
Flesh Tone
Picture Options
N In PC mode, you can only make changes to the Color Tone and Size from among the
items in Picture Options.
Color Tone Cool / Normal / Warm1 / Warm2
TV
Sound
Picture Options
Channel
: Normal
: 16:9
: Auto
: Normal
: Off
Size
Digital NR
HDMI Black Level
Film Mode
Setup
Input
UMove
EEnter
RReturn
Occasionally, you may want to change the size of the image on your screen. Your TV comes with screen size options, each
designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as
well. In general, though, you should view the TV in 16:9 mode as much as possible.
O Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
16:9 : Sets the picture to 16:9 wide mode.
Wide Zoom : Magnify the size of the picture more than 4:3.
Zoom : Magnifies the size of the picture on the screen.
4:3 : Sets the picture to 4:3 normal mode.
Screen Fit : Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals
are input.
N Temporary image retention may occur when viewing a static image on the set for more than two hours.
N After selecting Zoom mode: Select
by pressing the or button. Use the or button to move the picture up and
down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.
N Wide Zoom: Move the screen up/down using the or button after selecting the
by pressing the or ENTERE
button.
N After selecting Just Scan in HDMI (1080i) or Component (1080i) mode: Select
by pressing the or button. Use the ,
, or button to move the picture. Press the ENTERE button.
Reset : Press the or button to select Reset, then press the ENTERE button. You can initialize the setting.
N HD (High Definition): 16:9 - 1080i, 720p (1280x720)
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
Picture Size
PC
16:9, 4:3
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed.
HDMI Black Level Normal / Low
You can select the black level on the screen to adjust the screen depth.
N This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not
be compatible with all external devices.
Film Mode Off / Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
N Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).
Reset OK / Cancel
Resets all picture settings to the default values.
English - 18
Book_650_BN68-01977B_00L02.indb 18
2009-03-28 2:06:19
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesnt equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode
Resolution
IBM
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
1280 x 720
MAC
VESA CVT
VESA DMT
VESA GTF
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
35.910
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.500
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
59.950
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
70.000
Sync Polarity
(H / V)
+/-/+
-/-/-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
-/+
N When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
English - 19
Book_650_BN68-01977B_00L02.indb 19
2009-03-28 2:06:19
Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
T Press the TOOLS button to display the Tools menu. You can also set the Auto
Adjustment by selecting Tools Auto Adjustment.
N This function does not work in DVI-HDMI mode.
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Brightness 45
Sharpness 50
Channel Auto Adjustment
Screen
Setup Advanced Settings
Picture Options
Reset
: OK
Sound
Input
UMove
EEnter
RReturn
Screen.
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PCs screen positioning if it does not fit the TV screen. Press the or button to adjusting the Vertical-Position. Press
the or button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
English - 20
Book_650_BN68-01977B_00L02.indb 20
2009-03-28 2:06:19
Sound Control
Configuring the Sound Menu
Mode Standard / Music / Movie / Clear Voice / Custom
You can select a sound mode to suit your personal preferences.
T Press the TOOLS button to display the Tools menu. You can also set the sound mode
by selecting Tools Sound Mode.
Equalizer
Sound
TV
Picture Mode
: Custom
Equalizer
SRS TruSurround HD : Off
Multi-Track Sound
: Mono
Auto Volume
: Off
Channel Speaker Select
: TV Speaker
Sound Select
: Main
Sound
Setup
Input
UMove
EEnter
RReturn
Balance L/R
Multi-Track Sound
T Press the TOOLS button to display the Tools menu. You can also set the Multi-Track Sound by selecting Tools MultiTrack Sound.
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
N Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
Speaker Select
When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home
theaters (external) speakers.
External Speaker: Used to listen to the sound of the External (Home Theater) Speakers.
TV Speaker: Used to listen to the sound of the TV Speakers.
N If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
N The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. Please set the volume
on your Home theater.
TV Speaker
External Speaker
Video No Signal
English - 21
Book_650_BN68-01977B_00L02.indb 21
2009-03-28 2:06:19
Setup
Configuring the Setup Menu
Language
TV
Setup
Language
: English
Time
Sound Child Lock
: Off
Change PIN
Caption
Channel Game Mode
: Off
Melody
: Off
: Off
Setup Energy Saving
AV Color System
PIP
Time
Clock Set
Setting the clock is necessary in order to use the various timer features of the TV.
Input
UMove
EEnter
O The current time will appear every time you press the INFO button.
N If you disconnect the power cord, you have to set the clock again.
N You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.
RReturn
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
T Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools Sleep Timer.
N To cancel the Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first.
On Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting youve chosen, set to
Activate.)
Off Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting youve chosen, set to
Activate.)
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat or Sat~Sun.
Volume: Set the desired volume level.
Channel: Select the desired channel.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
N Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.
English - 22
Book_650_BN68-01977B_00L02.indb 22
2009-03-28 2:06:20
Change PIN
You can change your personal ID number that is required to set up the TV.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0.
N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0:
POWER (Off), MUTE, 8, 2, 4, POWER (On).
English - 23
Book_650_BN68-01977B_00L02.indb 23
2009-03-28 2:06:20
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see PIP Settings below for details.
T Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools PIP.
N PIP Settings
Main picture
Sub picture
Component1, 2
HDMI1, HDMI2, PC
TV, AV
Setup
TV
Input
UMove
EEnter
RReturn
PIP
TV
Picture PIP
N If you turn the TV off while watching in PIP mode and turn it on again, the PIP window
will disappear.
N You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
Sound
Channel
: On
: TV
:
:
: Air3
Source
Size
Position
Channel
Setup
Input
PIP On / Off
UMove
EEnter
RReturn
Input
Configuring the Input Menu
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O Press the SOURCE button on the remote control to view an external signal source.
TV, AV, Component1, Component2, PC, HDMI1/DVI, HDMI2.
N You can choose only those external devices that are connected to the TV.
Edit Name
: TV
Sound
Channel
Setup
Input
Edit Name
Input
TV
UMove
EEnter
RReturn
Name the device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray
/ HD DVD / DMA
N When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in
the Edit Name of the Input mode. In this case, a separate sound connection is required.
English - 24
Book_650_BN68-01977B_00L02.indb 24
2009-03-28 2:06:20
Appendix
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply,
call your nearest Samsung service center.
Problem
Possible Solution
Poor picture.
Try another channel. / Adjust the antenna. / Check all wire connections.
No picture or sound.
Make sure the Component cables are connected to the correct jacks.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not
your TV.
Snowy picture.
Your cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on picture.
Adjust the Coarse tuning and then adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
If Screen Fit is selected with some external devices, the picture may appear distorted in
the corner of the screen. This symptom is caused by the external devices, not TV.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
N This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
English - 25
Book_650_BN68-01977B_00L02.indb 25
2009-03-28 2:06:20
LCD-TV
PDP-TV
LFD
inches
VESA Spec. (A * B)
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
Standard Screw
Quantity
M4
M6
M8
M8
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
3
2
1
English - 26
Book_650_BN68-01977B_00L02.indb 26
2009-03-28 2:06:20
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Wall
2. Remove the screws from the center back of the TV, put the screws into the clamps, and
then fasten the screws onto the TV again.
N Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
N Screw Specifications
For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
N Install the TV near to the wall so that it does not fall backwards.
N It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
N Untie the string before moving the TV.
Wall
4. Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
English - 27
Book_650_BN68-01977B_00L02.indb 27
2009-03-28 2:06:21
Specifications
Model Name
LN22B650
Screen Size
(Diagonal)
22 inch
1360 x 768 @ 60Hz
PC Resolution (Optimum)
Sound
(Output)
3W X 2
Dimensions (WxDxH)
Without Stand
With stand
Weight
Without Stand
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
Left / Right
English - 28
Book_650_BN68-01977B_00L02.indb 28
2009-03-28 2:06:21
O fato de assistir a TV LCD no formato 4:3 por um longo perodo de tempo pode deixar traos de bordas
exibidos nas partes esquerda, direita e central da tela, causados pela diferena da emisso de luz na tela.
A utilizao de um DVD ou de um console de jogo pode causar um efeito similar na tela. Danos provocados
pelo efeito acima no so cobertos pela Garantia.
A exibio de imagens estticas de Video games e PC por mais tempo que um determinado perodo pode produzir psimagens parciais. Para evitar esse efeito, reduza o "brilho" e o "contraste" ao exibir imagens estticas.
Book_650_BN68-01977B_00L02.indb 1
2009-03-28 2:06:21
Portugus
NDICE
INFORMAES GERAIS
Controle de Imagem
Lista de recursos...................................................................2
Acessrios.............................................................................2
Visualizao do painel de controle........................................3
Visualizao do painel de conexo.......................................4
Controle remoto.....................................................................6
Colocao das pilhas no controle remoto.............................6
CONEXES
Ligar antenas VHF e UHF.....................................................7
Ligar a um sistema de televiso a cabo................................7
Conexo de um DVD / Blu-ray player / Decodificador /
Receptor de satlite (Set-Top) por meio de HDMI................8
Conexo de um DVD / Blu-ray player / Decodificador /
Receptor de satlite (Set-Top) por meio de DVI....................9
Conexo de um DVD / Blu-ray player / Decodificador /
Receptor de satlite (Set-Top) por meio de cabos
Component............................................................................9
Ligar um vdeo cassete.......................................................10
Como conectar um amplificador/DVD Home Theater.........10
Conectando uma filmadora.................................................11
Conectar um computador....................................................12
Operaes
Visualizao dos menus......................................................13
Recurso Plug & Play...........................................................14
Controle de Som
Configurao das Menu de som.........................................21
Configurao
Configurao das menu Configurao................................22
Visualizao do PIP (Picture-in-Picture)..............................24
Entrada
Configurao das menu Entrada.........................................24
APNDICE
Soluo de problemas.........................................................25
Especificaes do kit de montagem na parede (VESA)......26
Uso do sistema de bloqueio Kensington anti-roubo............26
Segurana do espao de instalao...................................27
Prender a TV parede com segurana..............................27
Especificaes....................................................................28
Controle de Canal
Configurao das Menu de Canal.......................................15
Gerenciamento de canais...................................................16
Licena
TruSurround HD, SRS e
Symbol so marcas registradas da SRS Labs, Inc.
TruSurround HD incorporada sob licena da SRS Labs, Inc.
Smbolo
N
Nota
Boto de um toque
Boto TOOL
Portugus -
Book_650_BN68-01977B_00L02.indb 1
2009-03-28 2:06:21
INFORMAES GERAIS
N As figuras e ilustraes deste Manual de usurio so fornecidas apenas para fins de referncia e podem ser diferentes da
aparncia real dos produtos. O design e as especificaes dos produtos podem sofrer alteraes sem aviso prvio para permitir o
aprimoramento do desempenho dos mesmos.
Lista de recursos
Acessrios
Cabo de fora
Instrues ao usurio
Pano de limpeza
Base do suporte
Corpo do suporte
Portugus -
Book_650_BN68-01977B_00L02.indb 2
2009-03-28 2:06:22
21
Portugus -
Book_650_BN68-01977B_00L02.indb 3
2009-03-28 2:06:22
Entrada de energia
Portugus -
Book_650_BN68-01977B_00L02.indb 4
2009-03-28 2:06:23
6 AV IN [VIDEO] / [R-AUDIO-L]
Entradas de vdeo e udio para dispositivos externos, como uma camcorder ou um VCR.
7 ANT IN
Conecta uma antena ou um sistema de TV a cabo.
8 TRAVA KENSINGTON (dependendo do modelo)
A trava Kensington (opcional) um dispositivo usado para proteger fisicamente o sistema quando usado em um local
pblico. Se deseja usar o dispositivo de trava, entre em contato com o revendedor no qual a TV foi adquirida.
N A posio da trava Kensington poder ser diferente, dependendo do modelo.
9 H (FONE DE OUVIDO)
Os fones de ouvido podem ser conectados sada de fones de ouvido do seu aparelho. Enquanto os fones de ouvido
estiverem conectados, o som dos alto-falantes internos ser desativado.
N A utilizao da funo de udio fica restrita ao conectar fones de ouvido TV.
N O uso prolongado de fones de ouvido em um volume alto pode prejudicar sua audio.
N Voc no ouvir o som dos alto-falantes quando conectar os fones de ouvido TV.
N O volume do fone de ouvido e da TV so ajustados separadamente.
0 COMPONENT IN 1, 2
Conecta um componente de udio/vdeo.
! SERVICE
Conector apenas para manuteno.
Portugus -
Book_650_BN68-01977B_00L02.indb 5
2009-03-28 2:06:23
Controle remoto
N Utilize o controle remoto at aproximadamente 7 metros de distncia da TV.
N Pode acontecer do funcionamento do controle remoto ser alterado por luz
clara.
N A cor e o formato do produto podem variar, dependendo do modelo.
1 POWER: Liga e desliga a TV.
2 BOTES NUMRICOS:
Pressione para mudar o canal.
3 _: canais (digitais e
analgicos) transmitidos pela
mesma estao. Por exemplo,
para selecionar o canal 54-3,
pressione 54, em seguida,
pressione _ e 3.
4 MUTE M: Pressione para
interromper temporariamente o
som.
5 y : Pressione para
aumentar ou diminuir o volume.
6 CH LIST: Usado para exibir
listas de canais na tela.
7 TOOLS: Use esta opo para
selecionar rapidamente as
funes usadas com mais
freqncia.
8 INFO: Pressione para exibir
informaes na tela da TV.
9 BOTES COLORIDOS: Utilize
esses botes nos menus Lista
de canais, etc.
0 P.SIZE: Seleo de tamanho da
imagem.
! TV: Seleciona o modo de TV
diretamente.
3
4
6
7
$
%
^
&
*
9
0
)
a
Portugus -
Book_650_BN68-01977B_00L02.indb 6
2009-03-28 2:06:23
CONEXES
Ligar antenas VHF e UHF
Se a antena tiver um conjunto de cabos condutores semelhantes ao da ilustrao, consulte a
seo "Antenas com cabo condutor duplo horizontal de 300 " a seguir.
Se a antena tiver um cabo condutor semelhante ilustrao da direita, consulte "Antenas com
cabo condutor redondo de 75 ".
Se voc tiver duas antenas, consulte "Antenas VHF e UHF separadas".
ANT IN
UHF
VHF
ANT IN
ANT IN
ANT IN
ANT OUT
ANT IN
Portugus -
Book_650_BN68-01977B_00L02.indb 7
2009-03-28 2:06:24
Cabo de entrada
Parte traseira da TV
Separador
Interruptor RF (A/B)
Decodificador
Conexo de um DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top) por meio de HDMI
Esta conexo pode ser efetuada apenas se houver uma tomada de Sada de HDMI no dispositivo externo.
Painel traseiro da TV
DVD / Blu-ray player / Decodificador /
decodificador de Satlite (Set-Top)
1. Conecte um cabo HDMI entre a tomada HDMI IN 1 (DVI) ou 2 da TV e a tomada HDMI do DVD / Blu-ray player ou
Decodificador / Receptor de satlite (Set-Top Box).
N O que HDMI?
HDMI (interface multimdia de alta definio) uma interface que permite a transmisso digital de sinais de vdeo e de udio
com apenas um cabo.
A diferena entre HDMI e DVI que o dispositivo HDMI menor e tem instalado o recurso de codificao HDCP (High
Bandwidth Digital Copy Protection Proteo de Contedo Digital de Alta Largura de Banda).
N Cada DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top) possui uma configurao de painel traseiro
diferente.
Portugus -
Book_650_BN68-01977B_00L02.indb 8
2009-03-28 2:06:24
Conexo de um DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top) por meio de DVI
S se aplica se existe o conector de sada DVI no dispositivo externo.
DVD / Blu-ray player / Decodificador /
decodificador de Satlite (Set-Top)
Painel traseiro da TV
1. Conecte um DVI ao cabo HDMI ou adaptador DVI-HDMI entre a tomada HDMI IN 1(DVI) da TV e a tomada DVI do DVD / Bluray player / Decodificador / Receptor de satlite (Set-Top Box).
2. Conecte os cabos de udio entre a tomada PC/DVI AUDIO IN da TV e o DVD / Blu-ray player / Decodificador / Receptor de
satlite (Set-Top Box).
N Cada DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top) possui uma configurao de painel traseiro
diferente.
N Ao conectar um DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top), use um terminal de conexo com a
mesma cor do cabo.
N Ao usar uma conexo a cabo HDMI/DVI, ser necessrio utilizar o conectorHDMI IN 1(DVI).
Conexo de um DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top) por meio de cabos Component
As tomadas do painel traseiro na TV facilitam a conexo do DVD / Blu-ray player / Decodificador / Receptor de satlite (Set-Top)
com a sua TV.
Painel traseiro da TV
DVD / Blu-ray player / Decodificador /
decodificador de Satlite (Set-Top)
Portugus -
Book_650_BN68-01977B_00L02.indb 9
2009-03-28 2:06:25
vdeo cassete
1. Conecte os cabos de udio entre as tomadas AUDIO OUT [R-AUDIO-L] da TV e as tomadas Audio Input do amplificador /
DVD home theater.
N Quando um amplificador de udio estiver conectado aos conectores AUDIO OUT [R-AUDIO-L]: Diminua o volume da TV
e ajuste o nvel do volume com o controle de volume do amplificador.
N Cada Amplificador/DVD Home Theater possui uma configurao diferente para o painel traseiro.
N Ao conectar um amplificador / DVD home theater, use um terminal de conexo da mesma cor do cabo.
Portugus - 10
Book_650_BN68-01977B_00L02.indb 10
2009-03-28 2:06:25
Filmadora
1. Conecte um cabo de vdeo entre a tomada AV IN [VIDEO] da TV e a tomada VIDEO OUT da camcorder.
2. Conecte os cabos de udio entre as tomadas AV IN [R-AUDIO-L] da TV e as tomadas AUDIO OUT da camcorder.
N Cada dispositivo de fonte de entrada externa possui uma configurao diferente para o painel traseiro.
N Ao conectar um dispositivo externo, use um terminal de conexo com a mesma cor do cabo.
Filmadora HD
1. Conecte um cabo HDMI entre a tomadaHDMI IN 1 (DVI) ou 2 na TV e a tomada de sada de PC no seu computador.
Portugus - 11
Book_650_BN68-01977B_00L02.indb 11
2009-03-28 2:06:26
Conectar um computador
Usando o Cabo D-Sub
Painel traseiro da TV
PC
PC
PC
Portugus - 12
Book_650_BN68-01977B_00L02.indb 12
2009-03-28 2:06:28
Operaes
Visualizao dos menus
Antes de usar a TV, siga as etapas abaixo para aprender como utilizar o menu para selecionar e ajustar as diferentes funes.
MENU
Exibir o menu na tela principal.
RETURN
Voltar ao menu anterior.
ENTERE / DIRECTION
Move o cursor e seleciona um
item. Selecionar o item atualmente
selecionado. Confirma a
configurao.
EXIT
Sai do menu de tela.
2. O menu principal aparece na tela. A lateral esquerda do menu possui cones: Imagem,
Som, Canal, Configurao, Entrada, Aplicativos, Suporte.
TV
Imagem
Picture Modo
: Padro
Luz de Fundo 8
Contraste 95
Brilho 45
Nitidez 50
Channel Cor 50
Matiz (Vd/Vm) Vd50
Vm50
Setup Configuraes avanadas
Opes de imagem
Restaurar
: OK
Sound
Input
UMover
R Retor-
EEntrar
TV
Imagem
Picture Modo
: Padro
Luz de Fundo 8
Contraste 95
Sound
Brilho 45
Nitidez 50
Channel Cor 50
Matiz (Vd/Vm) Vd50 Vm50
Setup Configuraes avanadas
Opes de imagem
Restaurar
: OK
Input
UMover
EEntrar
Brilho
R Retornar
cone de ajuda
7. Pressione o boto ENTERE para concluir a configurao. Pressione o boto EXIT para
sair.
Portugus - 13
Book_650_BN68-01977B_00L02.indb 13
2009-03-28 2:06:28
Portugus - 14
Book_650_BN68-01977B_00L02.indb 14
2009-03-28 2:06:29
Controle de Canal
Configurao das Menu de Canal
Antena Ar / STD / HRC / IRC
TV
Antes de a TV iniciar a memorizao dos canais disponveis, voc dever especificar o tipo
de fonte de sinal conectada TV (isto , ar ou sistema de cabo).
N STD, HRC e IRC identificam vrios tipos de sistema de TV a cabo. Entre em contato
com a empresa local de TV a cabo para identificar o tipo de sistema a cabo existente em
sua rea especfica. Neste ponto, a fonte do sinal foi selecionada.
: Ar
Prog. Automtica
Lista de canais
Sound
Sintonia Fina
Sistema de Cor
: Auto
Channel
Setup
Input
Prog. Automtica
Canal
Picture Antena
UMover
EEntrar
R Retornar
Lista de canais
Para procedimentos detalhados sobre a utilizao da Lista de canais, consulte as instrues de "Gerenciamento de canais".
O Voc pode selecionar essas opes pressionando o botoCH LIST no controle remoto.
Sintonia Fina
Utilize a sintonizao fina para ajustar manualmente um canal particular para uma tima recepo.
N Se voc no armazenar na memria o canal com a sintonizao fina ajustada, as alteraes no sero salvas.
N * aparecer junto ao nome dos canais com sintonizao fina.
N Para redefinir a configurao de sintonizao fina, pressione o boto para selecionar Restaurar Padres e ento
pressione ENTERE.
Portugus - 15
Book_650_BN68-01977B_00L02.indb 15
2009-03-28 2:06:29
Gerenciamento de canais
Utilizando a Lista de Canais, voc pode facilmente bloquear/desbloquear ou adicionar/excluir canais.
Adicionar / Apagar
Utilizando a Lista de Canais, voc pode adicionar canais.
1. Pressione o boto CH LIST.
2. Mova o campo seleo pressionando os botes , , ou , selecione o canal a
ser adicionado, em seguida pressione o boto ENTERE para adicionar o canal.
N Se o boto ENTERE for pressionado novamente, o smbolo c prximo ao nmero
do canal desaparecer e o canal no ser adicionado.
Bloquear / Desbloquear
Lista de canais
Ar
1 / 10
Ch.
Ar 2
Ar 3
Ar 4
Ar 5
Ar
6
Este recurso permite que voc impea usurios no autorizados, como crianas, de
c
Ar
7
assistirem programas inadequados ao ativar o mute do vdeo e do udio.
c
Ar
8
N \ est ativo quando o Bloqueio de Canais selecionado como Lig. (consulte a pgina
c
Ar
9
22)
c
Ar
10
1. Pressione o boto CH LIST.
Ar
11
c
2. Mova o campo seleo pressionando os botes , , ou , selecione o canal a
# Add
\ Bloquear
ser bloqueado, em seguida pressione o boto ENTERE.
n Mover
E Entrar
N A tela de entrada do nmero PIN aparecer. Digite seu nmero PIN de 4 dgitos.
CH Pgina
R Retornar
N A senha padro de uma TV nova 0-0-0-0. Voc poder alterar a senha selecionando
Mudar Senha no menu.
N Se voc pressionar novamente o boto ENTERE, o smbolo c symbol next prximo ao canal ir desaparecer e o canal
no ser adicionado.
N Uma tela azul exibida quando o Bloqueio de Canais ativado.
N Selecione Lig. ou Deslig., Bloqueio de Canais para trocar facilmente os canais selecionados em \ como ativos ou inativos.
c
Portugus - 16
Book_650_BN68-01977B_00L02.indb 16
2009-03-28 2:06:29
Controle de Imagem
Configurao das Menu de Imagem
Modo
TV
Voc pode selecionar o tipo de imagem que melhor corresponde aos seus requisitos de visualizao.
T Pressione o boto TOOLS para exibir o menu Herramientas. Tambm possvel definir o modo de
imagem selecionando Ferramentas Modo de Imagem.
Dinmico
Imagem
Picture Modo
: Padro
Luz de Fundo 8
Contraste 95
Sound
Brilho 45
Nitidez 50
Channel Cor 50
Matiz (Vd/Vm) Vd50 Vm50
Setup Configuraes avanadas
Opes de imagem
Restaurar
: OK
Input
UMover
R Retor-
EEntrar
Configuraes avanadas
A nova TV Samsung permite que voc crie muito mais definies de imagem do que os modelos
anteriores.
N Configuraes Avanadas disponveis no modo Padro ou Filme.
N No modo PC, possvel fazer alteraes apenas em Gamma e Estabilidade de Branco nos itens
de Configuraes Avanadas.
Tom de preto Desligado / Escuro / Mais escuro / Muito escuro
TV
Configuraes
: Desligado
Dynamic Contrast
: Mdio
Gamma
: 0
Sound
Espao de Cores
: Nativo
Estabilidade de Branco
Channel Tom de Pele
: 0
Aprim. da Margem
: Ligado
Setup
Input
UMover
EEntrar
R Retornar
Voc pode ajustar a intensidade da cor principal (vermelho, verde, azul). (-3 ~ +3)
Espao de cores
O espao de cores uma matriz de cores composta pelas cores vermelho, verde e azul. Selecione o espao de cores de sua preferncia e
experimente as cores mais naturais.
Auto: O espao de cores automtico faz o ajuste automtico tonalidade de cor mais natural com base em fontes de programas.
Nativo: O espao de cores Nativo oferece tonalidades de cores intensas e sofisticadas.
Estabilidade de Branco
Voc pode ajustar a temperatura da cor para obter imagens com cores mais naturais.
Verm.-Offset: Ajusta a tonalidade da cor vermelha.
Verde-Offset: Ajusta a tonalidade da cor verde.
Azul-Offset: Ajusta a tonalidade da cor azul.
Verm.-Gain: Ajusta o brilho da cor vermelha.
Verde-Gain: Ajusta o brilho da cor verde.
Azul-Gain: Ajusta o brilho da cor azul.
Restaurar Padres: A estabilidade de branco estabelecida anteriormente retornar aos padres de fbrica.
N A alterao do valor de ajuste atualizar a tela ajustada.
Portugus - 17
Book_650_BN68-01977B_00L02.indb 17
2009-03-28 2:06:29
Tom de Pele
Opes de imagem
N No modo PC, voc pode fazer ajustes somente em Tonalidade de Cor e Tamanho
dentre os itens em Opes de imagem.
Tonalidade de cor Fria / Normal / Quente1 / Quente2
Opes de imagem
TV
Channel
Tamanho
Digital NR
Nvel de Preto HDMI
Modo Filme
: Normal
: 16:9
: Auto
: Normal
: Desligado
Setup
Input
Tamanho
UMover
EEntrar
R Retornar
possvel que voc queira alterar o tamanho da imagem na tela. A sua TV vem com vrias opes de tamanho de tela,
projetadas para o melhor desempenho com tipos especficos de entrada de vdeo. Seu receptor de cabo/satlite tambm pode ter
a prpria configurao de tamanhos de tela. Geralmente, voc deve visualizar a TV no modo 16:9 o mximo possvel.
O Voc tambm pode pressionar o boto P.SIZE no controle remoto para alterar o tamanho da imagem.
16:9: Ajusta a imagem para o modo amplo 16:9.
Zoom Amplo : Amplia o tamanho da tela mais do que o modo 4:3
Zoom : Amplia o tamanho da imagem na tela.
4:3: Ajusta a imagem para o modo normal 4:3.
Ajuste tela: Use esta funo para ver a imagem inteira sem cortes, quando houver a entrada dos sinais HDMI (720p/1080i),
Component (1080i).
N A reteno da imagem temporria pode ocorrer ao visualizar uma imagem esttica no aparelho por mais de duas horas.
N Aps selecionar Modo Zoom: Selecione
pressionando o boto ou . Pressione o boto ou para mover a imagem
para cima e para baixo. Aps selecionar
pressione o boto ou para aumentar ou reduzir o tamanho da imagem no
sentido vertical.
N Zoom Amplo : Mova a tela para cima/para baixo, usando o boto ou aps selecionar o
pressionando o boto ou
ENTERE.
N Aps selecionar Apenas varrer no modo HDMI (1080i) or Component (1080i): Selecione
pressionando o boto ou .
Pressione os botes , , ou para mover a imagem. Pressione o boto ENTERE.
Restaurar Padres: Pressione o boto ou para selecionar Restaurar Padres, e em seguida, pressione ENTERE. A
configurao pode ser iniciada.
N HD (Alta definio): 16:9 - 1080i, 720p (1280x720)
N As definies podem ser ajustadas e armazenadas em cada dispositivo externo conectado a uma entrada da TV.
Fonte de entrada
Tamanho da imagem
PC
16:9, 4:3
Se o sinal de transmisso recebido pela TV estiver fraco, voc poder ativar o recurso de reduo de rudo digital para ajudar a
reduzir qualquer imagem fantasma e esttica na tela.
N Quando o sinal est fraco, selecione uma das outras opes at que a melhor qualidade de imagem seja exibida.
Nvel de preto em HDMI Normal / Baixo
A TV pode ser configurada para detectar e processar automaticamente sinais de vdeo de todas as fontes e ajustar a imagem
para obter a melhor qualidade.
N Modo Filme suportado em TV, Vdeo, Componente (480i / 1080i) e HDMI (480i / 1080i).
Restaurar OK / Cancelar
Restaura todas as configuraes de imagem para os valores padro.
Portugus - 18
Book_650_BN68-01977B_00L02.indb 18
2009-03-28 2:06:29
Modos de visualizao
Se o sinal do sistema for igual ao modo de sinal padro, a tela se ajusta automaticamente. Se o sinal do sistema no for igual ao
modo de sinal padro, ajuste o modo consultando o guia do usurio da placa de vdeo; caso contrrio, poder no haver vdeo.
Para os modos de visualizao listados abaixo, a imagem da tela foi otimizada durante a fabricao.
D-Sub e HDMI/DVI Entrada
Modo
Resoluo
Freqncia horizontal
(KHz)
Freqncia vertical
(Hz)
Frequncia
(MHz)
IBM
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
1280 x 720
31.469
31.469
35.000
49.726
35.910
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.500
70.086
70.087
66.667
74.551
59.950
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
70.000
25.175
28.322
30.240
57.284
32.750
74.500
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
85.500
89.040
MAC
VESA CVT
VESA DMT
VESA GTF
Polaridade
Sincr
(H / V)
+/-/+
-/-/-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
-/+
N Ao usar uma conexo a cabo HDMI/DVI, ser necessrio utilizar o conectorHDMI IN 1(DVI).
Portugus - 19
Book_650_BN68-01977B_00L02.indb 19
2009-03-28 2:06:30
Ajuste automtico
Utilize a funo Ajuste automtico para que a TV ajuste automaticamente os sinais de vdeo
que recebe. Esta funo tambm faz a sintonizao fina automtica das configuraes e
ajusta os valores e as posies da frequncia.
T Pressione o boto TOOLS para exibir o menu Herramientas. Tambm possvel definir
o Ajuste automtico selecionando Ferramentas Auto Ajuste.
N Esta funo no funciona no modo DVI-HDMI.
TV
Imagem
Picture Modo
: Padro
Luz de Fundo 8
Contraste 95
Sound
Brilho 45
Nitidez 50
Channel Ajuste automtico
Tela
Setup Configuraes avanadas
Opes de imagem
Restaurar
: OK
Input
UMover
EEntrar
R Retornar
Tela
Grosso / Ajuste fino
Ajuste o posicionamento de tela do PC se ela no se encaixar na tela da TV. Pressione o boto ou para ajustar a posio
vertical. Pressione o boto ou para ajustar a posio horizontal.
Restaurar Imagem
Portugus - 20
Book_650_BN68-01977B_00L02.indb 20
2009-03-28 2:06:30
Controle de Som
Configurao das Menu de som
Modo Padro / Msica / Filme / Voz destacada / Personalizado
Voc pode selecionar um modo de som para atender s suas preferncias pessoais.
T Pressione o boto TOOLS para exibir o menu Herramientas. Tambm possvel definir
o modo de imagem selecionando Ferramentas Modo de Som.
Equalizador
Som
TV
Picture Modo
: Personalizado
Equalizador
SRS TruSurround HD : Desligado
Som de Vrias Faixas : Mono
Volume Automtico : Desligado
Channel Selecionar Alto-falante : Alto-falante TV
Seleo do Som
: Principal
Sound
Setup
Input
UMover
EEntrar
R Retornar
Balano L/R
Selecionar alto-falante
Quando voc assistir TV com ele conectado a um home theater, desligue os alto-falantes da TV para que voc possa ouvir melhor
o som que sai dos alto-falantes do home theater (externo)
Alto-falante Ext: Utilizado para ouvir o som dos alto-falantes externos (home theater).
Alto-falante TV: Utilizado para ouvir o som dos alto-falantes da TV.
N Caso voc selecione Alto-falante Ext no menu Selecionar Alto-falante, as configuraes de som sero limitadas.
N Os botes de volume e MUTE no funcionam quando Selecionar Alto-falante estiver definida como Alto-falante Ext. Defina
o volume no seu home theater.
Alto-falante da TV
Alto-falantes
externos
Video sem Sinal
Alto-falantes internos da TV
RF, AV, Componente, PC, HDMI
Sada do alto-falante
Mudo
Sada do alto-falante
Mudo
Mudo
Portugus - 21
Book_650_BN68-01977B_00L02.indb 21
2009-03-28 2:06:30
Configurao
Configurao das menu Configurao
Idioma
TV
Configurao
Idioma
: Portugus
Tempo
Sound Bloqueio de Canais : Desligado
Mudar Senha
Caption
Channel Modo Jogo
: Desligado
Melodia
: Desligado
Setup Economia de Energia : Desligado
Sistema de Cor AV
PIP
Tempo
Definio do relgio
necessrio configurar o relgio para se poder usar os diversos recursos de Timer da TV.
Input
UMover
EEntrar
O A hora aparecer sempre que voc pressionar o boto INFO.
N Se o cabo de fora for desconectado, ser necessrio definir novamente no relgio.
N possvel ajustar diretamente ms, dia, ano, hora e minuto, pressionando as teclas numricas do controle remoto.
R Retornar
Sleep Timer
O sleep timer desliga automaticamente a TV depois de um tempo predefinido (de 30, 60, 90, 120, 150 e 180 minutos).
T Pressione o boto TOOLS para exibir o menu Herramientas. Tambm possvel definir o sleep timer selecionando
Ferramentas Sleep Timer.
N Para cancelar a funo Sleep Timer, selecione Desligado.
Temporizador 1 / Temporizador 2 / Temporizador 3
Trs diferentes configuraes de timer podem ser realizadas. preciso ajustar o relgio primeiro.
Hora de Ligar: Defina hora, minuto, am/pm e ativar/inativar (Para ativar o timer com a configurao correspondente,
configure para Ativado.)
Horrio para desligar: Defina hora, minuto, am/pm e ativar/inativar (Para ativar o timer com a configurao correspondente,
configure para Ativado.)
Repetir: Selecione Uma vez, Dirio, Seg~Sex, Seg~Sb ou Sb~Dom.
Volume: Selecione o nvel de volume desejado.
Canal: Selecione o canal desejado.
N Defina diretamente a hora e os minutos, pressionando os botes numricos no controle remoto.
N Desligamento automtico
Ao definir o timer como Ligado, sua TV ser desligada se voc no operar o controle durante as prximas 3 horas aps o
cronmetro t-lo ligado. Esta funo est disponvel somente no modo timer Ligado e impede o superaquecimento que pode
ocorrer se a TV permanecer ligada por muito tempo.
Portugus - 22
Book_650_BN68-01977B_00L02.indb 22
2009-03-28 2:06:30
Alterar o PIN
Voc poder alterar seu nmero de ID pessoal necessrio para configurar a TV.
N Antes de a tela de configurao aparecer, a tela de entrada da senha aparecer. Digite seu nmero PIN de 4 dgitos.
N A senha padro de uma TV nova "0-0-0-0".
N Se voc esquecer o cdigo PIN, pressione os botes do controle remoto, na sequncia a seguir, para redefinir o PIN ao
nmero inicial 0-0-0-0: POWER (Desligado), MUTE, 8, 2, 4, POWER (Ligado).
Portugus - 23
Book_650_BN68-01977B_00L02.indb 23
2009-03-28 2:06:30
Subimagem
Componente1, 2
HDMI1, HDMI2, PC
TV, AV
Configurao
TV
Input
UMover
EEntrar
R Retornar
PIP
TV
Picture PIP
Sound
Channel
Entrada
Tamanho
Posio
Canal
: Ligado
: TV
:
:
: Ar3
Setup
Input
UMover
EEntrar
R Retornar
Entrada
Entrada
Configurao das menu Entrada
Lista de fontes
Use para selecionar a TV ou outras fontes de entrada externa como DVD / Blu-Ray players
ou cabos/receptores de satlite (Set-Top Box) conectadas TV. Use para selecionar a fonte
de entrada escolhida.
O Pressione o boto SOURCE no controle remoto para visualizar uma fonte externa de
sinal.
O Voc pode tambm mudar para a entrada HDMI simplesmente pressionando o boto
HDMI no controle remoto.
TV, AV, Componente1, Componente2, PC, HDMI1/DVI, HDMI2.
Entrada
TV
Editar Nome
: TV
Sound
Channel
Setup
Input
UMover
EEntrar
R Retornar
Editar Nome
Nomeie o dispositivo conectado s tomadas de entrada para facilitar a seleo de sua fonte de entrada.
VCR / DVD / Cabo STB / Satlite STB / PVR STB / Receptor AV / Jogo / Camcorder / PC / DVI PC/ DVI / TV / IPTV / Blu-ray /
HD DVD / DMA
N Ao conectar um cabo HDMI/DVI porta HDMI IN 1(DVI), voc deve ajustar o modo HDMI1/DVI para DVI ou DVI PC em
Editar Nome do modo Entrada. Neste caso, necessria uma conexo de som separada.
Portugus - 24
Book_650_BN68-01977B_00L02.indb 24
2009-03-28 2:06:31
APNDICE
Soluo de problemas
Se a TV aparentar ter algum problema, experimente primeiro verificar esta lista de possveis problemas e solues. Caso nada
disto funcione, consultar o centro de assistncia Samsung mais prximo.
Problema
Soluo possvel
Imagem ruim.
Tente outro canal. / Ajuste a antena. / Verifique todas as conexes com cabos.
A TV no quer ligar.
Problemas no funcionamento do
controle remoto.
Fantasma na imagem.
Se Ajuste tela estiver selecionado com alguns dispositivos externos, poder haver
distoro de imagem no canto da tela. Este problema causado por dispositivos
externos e no pela TV.
Essa mensagem aparece quando voc mantm o boto EXIT pressionado por um
tempo. As configuraes do produto so reconfiguradas para o padro de fbrica.
N O painel TFT LCD usa um painel com subpixels (3.133.440) que exige uma tecnologia sofisticada para produzir. Entretanto,
pode haver poucos pixels luminosos ou escuros na tela. Esses pixels no causaro nenhum impacto no desempenho do
produto.
Portugus - 25
Book_650_BN68-01977B_00L02.indb 25
2009-03-28 2:06:31
LCD-TV
PDP-TV
LFD
polegadas
Especif. VESA (A x B)
19~22
100 x 100
23~29
200 x 100
30~40
200 x 200
46~55
400 x 400
57~70
800 x 400
80~
1400 x 800
42~50
400 x 400
58~63
600 x 400
70~
800 x 400
80~
1400 x 800
30~39
200 x 200
40~52
400 x 400
55~70
800 x 400
70~
1400 x 800
Parafuso Padro
Quantidade
M4
M6
M8
M8
M6
4
M8
No instale o kit de montagem em parede enquanto a TV estiver ligada. Isso pode causar ferimentos devido a choques eltricos.
3
2
1
Portugus - 26
Book_650_BN68-01977B_00L02.indb 26
2009-03-28 2:06:31
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Parede
2. Remova os parafusos da parte traseira central da TV, coloque-os em grampos e aperteos novamente na TV.
N Os parafusos podem no ser fornecidos com o produto. Neste caso, adquira
parafusos com as especificaes a seguir.
N Especificaes de parafuso
Para uma TV LCD de 17 a 29 polegadas: M4 X 15 / Para uma TV LCD de 32 a 40
polegadas: M6 X 15
3. Conecte os grampos fixados na TV e os que esto fixados na parede com um fio forte e
prenda-os bem.
N Instale a TV perto da parede para que ela no caia para trs.
N seguro conectar a corda para que os grampos fixados na parede fiquem no
mesmo nvel ou abaixo dos grampos fixados na TV.
N Desamarre a corda antes de mover a TV.
Parede
4. Verifique se todas as conexes esto seguras. Verifique periodicamente as conexes para evitar qualquer sinal de fadiga ou
falha. Caso haja alguma dvida sobre a segurana das conexes, entre em contato com um profissional de instalao.
Portugus - 27
Book_650_BN68-01977B_00L02.indb 27
2009-03-28 2:06:32
Especificaes
Nome do modelo
LN22B650
Tamanho da tela
(Diagonal)
22"
1360 x 768 @ 60Hz
Resoluo do PC (Ideal)
Som
(Sada)
3W X 2
Dimenses (LxAxP)
Sem suporte
Com suporte
Peso
Sem suporte
Com suporte
Consideraes ambientais
Temperatura de operao
Umidade em operao
Temperatura de armazenamento
Umidade em armazenamento
Base rotativa
Esquerda/Direita
Portugus - 28
Book_650_BN68-01977B_00L02.indb 28
2009-03-28 2:06:32