You are on page 1of 242

www.avx.

com

AVX RF Microwave
Products

Version 15.10

AVX Microwave
Ask The World Of Us
As one of the worlds broadest line
multilayer ceramic chip capacitor
suppliers, and a major Thin Film
RF/Microwave capacitor, inductor,
directional coupler and low pass filter and
microwave ceramic capacitor manufacturer,
it is our mission to provide First In Class
Technology, Quality and Service, by
establishing progressive design,
manufacturing and continuous
improvement programs driving
toward a single goal:
TOTAL CUSTOMER SATISFACTION

RF/Microwave Products
Table of Contents
Company Profile ........................................................................4

1206 High Performance


LP1206A0700ANTR Low Pass Filter.................................................113-114

Thin-Film RF/Microwave Capacitor Technology


Accu-P
Thin-Film Technology......................................................................................6

LP1206A0512BNTR Harmonic Low Pass Filter..................................115-116

Thin-Film RF/Microwave Products Designer Kits .....117-119

Thin-Film Chip Capacitors ..........................................................................7-9


0201 Typical Electrical Tables Accu-P ...............................................10-11
0402 Typical Electrical Tables Accu-P ...............................................12-13

0603 Typical Electrical Tables Accu-P ...............................................14-15


0805 Typical Electrical Tables Accu-P ...............................................16-17
1210 Typical Electrical Tables Accu-P ..............................................18-19
High Frequency Characteristics .............................................................20-25
Environmental / Mechanical Characteristics ..................................................26
Performance Characteristics RF Power Applications.......................................27
Application Notes..................................................................................28-29
Automatic Insertion Packaging .....................................................................30

Thin-Film RF/Microwave Inductor Technology


Accu-L
L0201 Tight Tolerance RF Inductor ........................................................32-33
L0402 Tight Tolerance RF Inductor ........................................................34-35
L0603 AND L0805 SMD High-Q RF Inductor Accu-L ........................36-38
Environmental Characteristics.......................................................................39
Application Notes ....................................................................................... 40

Thin-Film RF/Microwave Directional Couplers


CP0302/CP0402/CP0603/CP0805
and DB0603N/DB0805 3dB 90

RF Inductors

CP0402W2700FNTR Wide Band High Directivity ....................................42-43

AL Series Air Core Inductors....................................................156-162


AS Series Square Air Core Inductors ........................................163-167

CP0402W2700FNTR Test Jigs .....................................................................44

LCWC Series Wire Wound Chip Inductor ........................................168-177

CP0302A5425ENTR / CP0402Q5425ENTR / CP0603Q5425ENTR


High Directivity Directional Couplers For WiFi Bands ...............................45-46
CP0402P High Directivity, Tight Coupling Tolerance ................................47-48
CP0402 High Directivity LGA Termination...............................................49-52
CP0603 High Directivity LGA Termination...............................................53-58
CP0402 / CP0603 High Directivity Couplers Test Jigs....................................59
CP0603 SMD Type Thin-Film Directional Couplers...............................60-62
CP0603 SMD Type High Directivity............................................................63
CP0805 SMD Type Thin-Film Directional Couplers...............................64-68
CP0805 and CP0603 Test Jigs ....................................................................69
DB0603N 3dB 90 Couplers .................................................................70-86
DB0805 3dB 90 Couplers ...................................................................87-98
DB0805 3dB 90 Test Jigs ..........................................................................99

Thin-Film RF/Microwave Harmonic Low Pass Filter


LP0402/LP0603/LP0805

RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
UQ Series High Q Ultra Low ESR MLC.........................................179-191
SQ Series Ultra Low ESR MLC ....................................................192-204
MK Series Ultra Low ESR, C0G (NP0) Capacitors .........................205-207
AQ Series..................................................................................208-211
MIL-PRF-55681 BG Voltage Temperature
Limits (+9020ppm/C).......................................................212-214
CDR11BG; CDR12BG (0.055" x 0.055") - Failure Rate Level: M, P, R, S
CDR13BG; CDR14BG (0.110" x 0.110") - Failure Rate Level: M, P, R, S

Performance Curves ..................................................................215-219


Automatic Insertion Packaging ............................................................220
HQ Series, High RF Power Capacitors.......................................221-227

RF/Microwave C0G (NP0) Capacitors

LP0402N Series Harmonic Low Pass Filter


Lead-Free LGA Termination Test Jigs ....................................................104

Ultra Low ESR CU Series, C0G (NP0) Capacitors (RoHS) ...........228-229


Ultra Low ESR U Series, C0G (NP0) Capacitors (RoHS)..............230-232
Ultra Low ESR U Series, C0G (NP0) Capacitors (RoHS)
Automotive, AEC Q200 Qualified...........................................233-235
Ultra Low ESR U Series, C0G (NP0) Capacitors (Sn/Pb).............236-238

LP0603 Lead-Free LGA Type ...........................................................105-108

RF/Microwave U Series Designer Kits ..............................239

LP0402N Series Harmonic Low Pass Filter


Lead-Free LGA Termination.........................................................101-103

LP0603 Test Jigs ......................................................................................109


LP0805 Type Harmonic....................................................................110-111
LP0805 Test Jigs ......................................................................................112

Multilayer Organic (MLOTM) Technology


MLOTM Capacitors ...........................................................121-124
MLOTM Diplexers
0603 WLAN/BT ...............................................................................125-130
0805 CDMA....................................................................................131-132
0805 WCDMA .................................................................................133-134
0805 WLAN ....................................................................................135-136
0805 WLAN/BT ...............................................................................137-138
Automated SMT Assembly/SMT Reflow Profile............................................139
MLOTM Inductors
Tight Tolerance ................................................................................140-141
High Current....................................................................................142-143
Hi-Q................................................................................................144-145
Performance Characteristics ......................................................................146
Automated SMT Assembly/SMT Reflow Profile............................................147
MLOTM SMT Crossovers
RF-DC.............................................................................................148-150
RF-RF .............................................................................................151-153
Automated SMT Assembly/SMT Reflow Profile............................................154

RF/Microwave Products
Table of Contents
Company Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Thin-Film RF/Microwave Capacitor Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30


Accu-P

Thin-Film RF/Microwave Inductor Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-40


Accu-L

Thin-Film RF/Microwave Directional Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-99

CP0302/CP0402/CP0603/CP0805 and DB0603N/DB0805 3dB 90

Thin-Film RF/Microwave Harmonic Low Pass Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-116


LP0402/LP0603/LP0805
LP1206 High Performance

Thin-Film RF/Microwave Products Designer Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117-119

Multilayer Organic (MLOTM) Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120-154


MLOTM Capacitors
MLOTM Inductors
TM
MLO Diplexers
MLOTM SMT Crossovers

RF Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155-177
Air Core Inductors
Square Air Core Inductors
Wire Wound Chip Inductors

RF/Microwave Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-239


RF/Microwave Multilayer Capacitors (MLC)
RF/Microwave C0G (NP0) Capacitors
RF/Microwave U Series Designer Kits

RF/Microwave Products
Company Profile

AVX Corporation is a leading manufacturer of multilayer ceramic,


thin film and tantalum, as well as other passive electronic
components. These products are used in virtually every electronic
system today, including data processing, telecommunications,
consumer electronics, automotive electronics, military and
aerospace systems, and instrumentation and process controls.
We continually strive to be the leader in all component segments we
supply. RF/Microwave capacitors is a thrust business for us. AVX
offers a broad line of RF/Microwave Chip Capacitors in a wide range
of sizes, styles, and ratings.
The Thin-Film Products range illustrated in this catalog represents
the state-of-the-art in RF Capacitors, Inductors, Directional
Couplers and Low Pass Filters. The thin-film technology provides
components that exhibit excellent batch-to-batch repeatability of
electrical parameters at RF frequencies.
The Accu-P series of capacitors are available in ultra-tight
tolerances (0.01pF) as well as non-standard capacitance values.
The Accu-L series of inductors are ideally suited for applications
requiring an extremely high Q and high current capability.
The CP0302/CP0402/CP0603/CP0805 series of Directional
Couplers cover the frequency range of 800 MHz to 6 GHz. They
feature low insertion loss, high directivity and highly accurate
coupling factors.
The LP0402/0603/0805 series of Low Pass Filters provide a rugged
component in a small size package with excellent high frequency
performance.
The Multilayer Organic (MLOTM) series of components are based on
AVXs patented multilayer organic technology (US patent 6,987,307).
They are low profile with frequencies well above 1GHz.
Another major series of microwave capacitors consists of both
multilayer porcelain and ceramic capacitors for frequencies from
10 MHz to 4.2 GHz (UQ and SQ Series). Six sizes of specially
designed ultra-low ESR C0G (NP0) capacitors are covered for
RF applications (CU and U Series).
The air core and wire wound ceramic chip inductors offer high
current ratings (up to 4.4A) and quality factor (>100).
Ask the world of us. Call (864) 967-2150.
Or visit our website http://www.avx.com

Thin-Film RF/Microwave
Capacitor Technology
Accu-P

Accu-P
Thin-Film Technology
THE IDEAL CAPACITOR

The non-ideal characteristics of a real capacitor can be


ignored at low frequencies. Physical size imparts inductance
to the capacitor and dielectric and metal electrodes result in
resistive losses, but these often are of negligible effect on the
circuit. At the very high frequencies of radio communication
(>100MHz) and satellite systems (>1GHz), these effects
become important. Recognizing that a real capacitor will
exhibit inductive and resistive impedances in addition to
capacitance, the ideal capacitor for these high frequencies is
an ultra low loss component which can be fully characterized
in all parameters with total repeatability from unit to unit.
Until recently, most high frequency/microwave capacitors
were based on fired-ceramic (porcelain) technology. Layers
of ceramic dielectric material and metal alloy electrode paste
are interleaved and then sintered in a high temperature oven.
This technology exhibits component variability in dielectric
quality (losses, dielectric constant and insulation resistance),
variability in electrode conductivity and variability in physical
size (affecting inductance). An alternate thin-film technology
has been developed which virtually eliminates these variances. It is this technology which has been fully incorporated
into Accu-P and Accu-P to provide high frequency capacitors exhibiting truly ideal characteristics.
The main features of Accu-P may be summarized as follows:
High purity of electrodes for very low and repeatable
ESR.
Highly pure, low-K dielectric for high breakdown field,
high insulation resistance and low losses to frequencies
above 40GHz.
Very tight dimensional control for uniform inductance,
unit to unit.
Very tight capacitance tolerances for high frequency
signal applications.

This accuracy sets apart these Thin-Film capacitors from


ceramic capacitors so that the term Accu has been
employed as the designation for this series of devices, an
abbreviation for accurate.

THIN-FILM TECHNOLOGY
Thin-film technology is commonly used in producing semiconductor devices. In the last two decades, this technology
has developed tremendously, both in performance and in
process control. Todays techniques enable line definitions of
below 1m, and the controlling of thickness of layers at 100
(10-2m). Applying this technology to the manufacture of
capacitors has enabled the development of components
where both electrical and physical properties can be tightly
controlled.
The thin-film production facilities at AVX consist of:
Class 1000 clean rooms, with working areas under
laminar-flow hoods of class 100, (below 100 particles
per cubic foot larger than 0.5m).
High vacuum metal deposition systems for high-purity
electrode construction.
Photolithography equipment for line definition down to
2.0m accuracy.
Plasma-enhanced CVD for various dielectric depositions (CVD=Chemical Vapor Deposition).
High accuracy, microprocessor-controlled dicing saws
for chip separation.
High speed, high accuracy sorting to ensure strict
tolerance adherence.

Orientation Marking

Alumina (Al 2O3)

Electrode

Seal
(SiNO)
Dielectric (SiO2 / SiNO)

Electrode

Alumina (Al 2O3)

Terminations

ACCU-P CAPACITOR STRUCTURE

Accu-P
Thin-Film Chip Capacitors
ACCU-P TECHNOLOGY

APPLICATIONS

The use of very low-loss dielectric materials, silicon dioxide and


silicon oxynitride, in conjunction with highly conductive electrode metals results in low ESR and high Q. These
high-frequency characteristics change at a slower rate with
increasing frequency than for ceramic microwave capacitors.
Because of the thin-film technology, the above-mentioned
frequency characteristics are obtained without significant
compromise of properties required for surface mounting.
The main Accu-P properties are:
Internationally agreed sizes with excellent dimensional
control.
Ultra small size chip capacitors (01005) are available.
Ultra tight capacitance tolerances.
Low ESR at VHF, UHF and microwave frequencies.
Enhanced RF power handling capablity.
High stability with respect to time, temperature, frequency
and voltage variation.
Nickel/solder-coated terminations to provide excellent solderability and leach resistance.

Cellular Communications
CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
Satellite TV
Cable TV
GPS (Global Positioning Systems)
Vehicle Location Systems
Vehicle Alarm Systems
Paging
Military Communications

Radar Systems
Video Switching
Test & Measurements
Filters
VCO's
Matching Networks
RF Amplifiers

APPROVALS
ISO 9001

ACCU-P FEATURES
Accu-P meets the fast-growing demand for low-loss
(high-Q) capacitors for use in surface mount technology especially for the mobile communications market, such as cellular
radio of 450 and 900 MHz, UHF walkie-talkies, UHF cordless
telephones to 2.3 GHz, low noise blocks at 11-12.5 GHz and
for other VHF, UHF and microwave applications.
Accu-P is currently unique in its ability to offer very
low capacitance values (0.05pF) and very tight capacitance
tolerances (0.01pF).
The RF power handling capability of the Accu-P allows
for its usage in both small signal and RF power applications.
Thin Film Technology guarantees minimal batch to batch
variability of parameters at high frequency.
Inspection test and quality control procedures in accordance with ISO 9001, CECC, IECQ and USA MIL
Standards yield products of the highest quality.
Hand soldering Accu-P: Due to their construction utilizing
relatively high thermal conductivity materials, Accu-Ps
have become the preferred device in R & D labs and production environments where hand soldering is used.

Accu-P
Thin-Film Chip Capacitors for
RF Signal and Power Applications
B1

ACCU-P (Signal and Power Type Capacitors)


L

T
B2
L

T
B1
B2

01005*

0201*

0402*

0603*

0805*

1210

0.4050.020
(0.0160.001)
0.215 0.020
(0.0085 0.001)
0.145 0.020
(0.006 0.001)
0.00 +0.1
-0.0
(0.000 +0.004
-0.000 )
0.10 0.03
(0.004 0.001)

0.600.05
(0.0230.002)
0.3250.050
(0.01280.002)
0.2250.050
(0.0090.002)
0.100.10
(0.0040.004)
0.150.05
(0.0060.002)

1.000.1
(0.0390.004)
0.550.07
(0.0220.003)
0.400.1
(0.0160.004)
0.00 +0.1
-0.0
(0.000 +0.004
-0.000 )
0.200.1
(0.0080.004)

1.600.1
(0.0630.004)
0.810.1
(0.0320.004)
0.630.1
(0.0250.004)
0.350.15
(0.0140.006)
0.350.15
(0.0140.006)

2.010.1
(0.0790.004)
1.270.1
(0.0500.004)
0.930.2
(0.0360.008)
0.300.1
(0.0120.004)
0.300.1
(0.0120.004)

3.020.1
(0.1190.004)
2.50.1
(0.1000.004)
0.930.2
(0.0360.008)
0.430.1
(0.0170.004)
0.430.1
(0.0170.004)

*Mount Black Side Up

DIMENSIONS: millimeters (inches)

HOW TO ORDER

(1)

0402

4R7

TR

Size

Voltage
2 = 200V
1 = 100V
5 = 50V
3 = 25V
Y = 16V
Z = 10V

Temperature
Coefficient (1)

Capacitance

C005
0201
0402
0603
0805
1210*

Tolerance
for
C2.0pF*

Specification
Code

Termination
Code

Packaging
Code

Capacitance
J = 030ppm/C expressed in pF.
(-55C to
(2 significant
+125C)
digits + number
K = 060ppm/C
of zeros)
(-55C to
for values <10pF,
+125C)
letter R denotes
decimal point.
Example:
68pF = 680
8.2pF = 8R2

TCs shown are per EIA/IEC Specifications.

Z = 0.01pF
P = 0.02pF
Q = 0.03pF
A = 0.05pF
B = 0.1pF
C = 0.25pF

B = Accu-P
technology

for C3.0pF
Q = 0.03pF
A = 0.05pF
B = 0.1pF
C = 0.25pF

for C5.6pF
A = 0.05pF
B = 0.1pF
C = 0.25pF

for 5.6pF<C<10pF

Engineering Kits Available


see pages 118-119
* Tolerances as tight as 0.01pF are available. Please consult the factory.

B = 0.1pF
C = 0.25pF
D = 0.5pF

W = Nickel/Solder Coated
TR = Tape & Reel
Accu-P 0402 Sn90,
Pb10***
T = Nickel/High Temperature
Solder Coated
Accu-P 0805**, 1210**
Sn96, Ag4
Nickel/Solder Coated
Accu-P 0603***
Sn63, Pb37
**S = Nickel/Lead Free
Solder Coated
Accu-P 01005, 0201,
0402, 0603
Sn100
**RoHS compliant
*** Not RoHS Compliant

for C10pF
F = 1%
G = 2%
J = 5%
LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

ELECTRICAL SPECIFICATIONS
Operating and Storage Temperature Range
Temperature Coefficients (1)
Capacitance Measurement
Insulation Resistance (IR)
Proof Voltage
Aging Characteristic
Dielectric Absorption

-55C to +125C
0 30ppm/C dielectric code J / 0 60ppm/C dielectric code K
1 MHz, 1 Vrms
1011 Ohms (1010 Ohms for 0201 and 0402 size)
2.5 UR for 5 secs.
Zero
0.01%

Accu-P
Signal and Power Type Capacitors
Accu-P Capacitance Ranges (pF)
TEMP. COEFFICIENT CODE
J = 030ppm/C (-55C to +125C)(2) K = 060ppm/C (-55C to +125C)(2)
Size
Size Code
Voltage
Cap in
pF(1)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
24.0
27.0
30.0
33.0
39.0
47.0
56.0
68.0
(1)
(2)

C005
16
100

50

0201
25

16

10

200

100

50

0402
25

16

10

200

0603
100
50

25

100

0805
50

25

1210
100
50

Cap
code

0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R3
2R4
2R5
2R6
2R7
2R8
2R9
3R0
3R1
3R2
3R3
3R4
3R5
3R6
3R7
3R8
3R9
4R0
4R1
4R2
4R3
4R4
4R5
4R6
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
140
150
160
170
180
190
200
210
220
240
270
300
330
390
470
560
680

For capacitance values higher than listed in table, please consult factory.
TC shown is per EIA/IEC Specifications.
These values are produced with K temperature coefficient code only.

Intermediate values are available within the indicated range.

Accu-P
0201 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance

C (pF)

Tol.

0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
1.2
1.25
1.3
1.35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.85
1.9
1.95
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9

0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05

10

Self
Resonance
Frequency
(GHz)
Typ.

20.9
19.4
17.9
16.4
15.5
14.6
14.1
12.5
11.9
11.3
10.9
10.4
10.0
9.5
9.3
9.1
8.9
8.8
8.6
8.4
8.2
8.0
7.8
7.6
7.5
7.4
7.3
7.2
7.1
7.0
6.8
6.7
6.6
6.5
6.4
6.3
6.2
6.2
6.1
6.0
5.9
5.7
5.6
5.5
5.4
5.3
5.2
5.1
5.0
4.9
4.8
4.7
4.6
4.6
4.5
4.5
4.4
4.4
4.3

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

599
574
510
445
436
427
423
418
413
408
403
398
394
389
384
379
374
370
365
360
358
355
353
350
348
345
343
340
338
335
332
330
327
324
321
318
315
312
309
306
301
296
292
287
282
277
272
269
265
261
257
253
250
246
242
238
234
230
227

402
316
280
245
240
235
232
230
227
224
222
219
217
214
211
209
206
203
201
198
197
195
194
193
191
190
189
187
186
184
183
181
180
178
176
175
173
172
170
168
166
163
160
158
155
152
150
148
146
144
141
139
137
135
133
131
129
127
125

0.055
0.110
0.163
0.216
0.262
0.309
0.360
0.411
0.461
0.512
0.563
0.614
0.664
0.715
0.766
0.817
0.868
0.918
0.969
1.020
1.078
1.135
1.193
1.251
1.308
1.366
1.424
1.481
1.539
1.597
1.642
1.687
1.732
1.777
1.822
1.866
1.911
1.956
2.001
2.046
2.150
2.254
2.358
2.462
2.566
2.670
2.773
2.878
2.983
3.088
3.192
3.297
3.402
3.506
3.611
3.716
3.820
3.925
4.030

650
614
550
520
510
500
494
489
484
478
473
468
462
457
452
446
441
436
430
425
421
418
414
411
407
403
400
396
393
389
386
382
378
375
371
367
364
360
357
353
348
343
337
332
327
322
317
312
308
304
299
295
291
286
282
278
273
269
265

3220
2682
2087
1693
1371
1149
1001
874
819
765
710
667
624
580
557
534
511
487
464
441
426
410
395
379
364
348
333
317
302
287
282
277
272
267
262
257
252
247
242
237
232
227
222
217
212
207
202
199
196
193
190
187
185
182
179
176
173
170
167

0.056
0.112
0.166
0.220
0.268
0.316
0.369
0.421
0.473
0.526
0.578
0.631
0.683
0.735
0.788
0.840
0.893
0.945
0.998
1.050
1.112
1.173
1.235
1.296
1.358
1.419
1.481
1.542
1.604
1.665
1.714
1.762
1.810
1.859
1.907
1.955
2.003
2.052
2.100
2.148
2.263
2.377
2.491
2.606
2.720
2.834
2.949
3.066
3.184
3.301
3.419
3.536
3.654
3.771
3.889
4.006
4.124
4.241
4.359

265
246
220
210
204
199
196
193
191
188
186
183
181
178
176
173
171
168
166
163
161
159
157
155
153
151
149
147
145
144
142
141
140
138
137
136
134
133
132
131
128
125
122
120
117
114
112
110
108
106
105
103
101
99
98
96
94
92
91

4010
3036
2404
1971
1604
1337
1177
1038
972
906
840
791
742
693
664
635
606
577
548
519
502
486
469
452
436
419
402
386
369
353
347
342
337
331
326
321
316
310
305
300
293
287
281
274
268
262
255
252
248
245
241
238
234
231
227
224
220
217
213

0.057
0.113
0.168
0.223
0.272
0.320
0.374
0.427
0.481
0.535
0.588
0.642
0.695
0.749
0.802
0.856
0.909
0.963
1.016
1.070
1.134
1.199
1.263
1.327
1.392
1.456
1.520
1.585
1.649
1.713
1.764
1.815
1.866
1.917
1.968
2.018
2.069
2.120
2.171
2.222
2.344
2.467
2.590
2.712
2.835
2.958
3.080
3.209
3.337
3.465
3.593
3.722
3.850
3.978
4.107
4.235
4.363
4.492
4.620

195
188
170
160
153
146
144
142
140
138
137
135
133
131
129
127
126
124
122
120
119
117
116
115
114
112
111
110
109
107
106
105
104
103
102
101
100
99
98
97
95
93
91
89
87
85
83
81
80
78
77
76
74
73
71
70
69
67
66

4450
3113
2441
1970
1646
1421
1265
1129
1066
1003
940
882
825
767
729
692
654
616
579
541
523
505
488
470
452
434
416
398
381
363
358
352
347
342
337
331
326
321
316
310
303
296
289
282
275
268
261
258
254
251
247
244
240
237
233
230
226
223
219

Accu-P
0201 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance
C (pF)

Tol.

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
17
18
19
20
22

0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.1
0.1
0.1
0.1
0.1
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%

Self
Tesonance
Frequency
(GHz)
Typ.

4.3
4.2
4.2
4.1
4.1
4.0
4.0
3.9
3.8
3.6
3.5
3.3
3.2
3.0
2.9
2.8
2.7
2.5
2.4
2.4
2.3
2.2
2.2
2.1
2.1
2.1
2.0

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

224
222
220
218
216
214
212
209
201
190
177
164
153
142
135
128
120
112
105
98
91
86
81
76
71
65
55

123
122
121
120
119
118
116
115
110
105
97
90
84
78
74
70
66
62
58
54
50
47
44
42
39
36
30

4.138
4.247
4.356
4.464
4.573
4.682
4.790
4.899
5.334
5.877
6.488
7.100
7.901
8.701
9.676
10.65
11.73
12.82
13.92
15.02
16.12
17.37
18.63
19.88
21.14
22.39
24.90

262
259
257
254
252
249
246
244
233
220
208
195
182
168
159
151
141
132
124
116
108
102
96
90
83
77
65

165
162
159
157
154
152
149
147
136
124
126
128
125
121
118
114
110
105
104
103
102
103
105
106
108
109
112

4.484
4.610
4.735
4.860
4.986
5.111
5.237
5.362
5.863
6.490
7.290
8.090
9.129
10.17
11.57
12.96
14.52
16.07
17.82
19.57
21.32
24.04
26.76
29.48
32.20
34.92
40.36

89
88
87
86
85
83
82
81
76
70
65
60
56
52
49
45
42
39
36
32
29
27
25
23
21
19
15

210
207
204
201
198
195
192
189
178
163
167
171
166
160
154
148
142
135
135
135
135
135
136
136
136
136
137

4.760
4.901
5.041
5.181
5.322
5.462
5.602
5.743
6.304
7.006
7.993
8.980
10.27
11.56
13.49
15.41
17.55
19.68
22.38
25.08
27.78
NA
NA
NA
NA
NA
NA

65
64
63
62
61
60
59
58
54
49
45
41
38
34
32
29
27
24
22
19
17
NA
NA
NA
NA
NA
NA

216
213
210
207
204
201
198
195
183
168
174
179
173
167
161
155
148
141
142
142
143
NA
NA
NA
NA
NA
NA

11

Accu-P
0402 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance

C (pF)

Tol.

0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
1.2
1.25
1.3
1.35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.85
1.9
1.95
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9

0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05

12

Self
Resonance
Frequency
(GHz)
Typ.

20.9
19.4
17.9
16.4
15.5
14.6
14.1
12.5
11.9
11.3
10.9
10.4
10.0
9.5
9.3
9.1
9.0
8.8
8.4
8.0
7.9
7.8
7.6
7.4
7.2
7.0
6.9
6.8
6.7
6.5
6.5
6.5
6.5
6.4
6.3
6.2
6.1
6.0
5.9
5.7
5.4
5.1
5.0
4.9
4.7
4.6
4.5
4.5
4.4
4.4
4.4
4.3
4.3
4.3
4.2
4.2
4.1
4.0
3.9

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

856
848
840
832
823
815
807
799
791
783
774
766
758
750
746
743
739
735
732
728
725
721
718
714
711
707
704
700
697
693
690
686
683
679
676
672
669
665
662
658
651
643
636
629
622
614
607
600
592
585
578
570
563
556
548
541
534
526
519

471
466
462
457
453
448
444
439
435
430
426
421
417
413
410
408
406
404
402
400
398
397
395
393
391
389
387
385
383
381
379
377
375
373
372
370
368
366
364
362
358
354
350
346
342
338
334
330
326
322
318
314
310
306
302
298
294
289
285

0.06
0.11
0.16
0.21
0.26
0.31
0.36
0.41
0.46
0.51
0.57
0.62
0.67
0.72
0.77
0.82
0.87
0.92
0.97
1.02
1.07
1.12
1.17
1.22
1.27
1.32
1.37
1.42
1.47
1.52
1.56
1.61
1.66
1.71
1.75
1.80
1.85
1.90
1.94
1.99
2.10
2.21
2.31
2.42
2.53
2.64
2.75
2.85
2.95
3.06
3.16
3.27
3.37
3.47
3.58
3.68
3.78
3.89
3.99

881
873
866
858
850
842
834
827
819
811
803
796
788
780
776
772
768
764
760
756
752
749
745
742
738
734
731
727
724
720
716
713
709
705
702
698
694
690
687
683
676
669
662
656
649
642
635
628
621
614
607
600
593
586
579
572
565
558
551

1411
1316
1222
1128
1033
939
844
750
667
583
500
465
431
396
375
354
334
313
292
271
258
245
232
218
205
192
179
165
152
139
135
130
126
122
118
113
109
105
101
96
93
89
85
81
77
74
70
68
66
64
62
60
58
57
55
53
51
49
47

0.06
0.11
0.16
0.21
0.27
0.32
0.37
0.42
0.47
0.52
0.57
0.62
0.67
0.72
0.78
0.83
0.88
0.93
0.98
1.04
1.09
1.14
1.20
1.25
1.31
1.36
1.41
1.47
1.52
1.58
1.62
1.67
1.72
1.77
1.82
1.87
1.92
1.97
2.01
2.06
2.18
2.30
2.42
2.54
2.65
2.77
2.89
3.01
3.13
3.24
3.36
3.48
3.60
3.71
3.83
3.95
4.06
4.18
4.30

562
554
547
539
532
525
517
510
502
495
487
480
472
465
456
447
438
429
420
411
406
401
396
391
386
381
376
371
366
361
358
355
352
349
347
344
341
338
335
332
326
321
315
309
303
298
292
288
283
279
274
270
265
261
256
252
247
243
238

1216
1115
1013
912
810
708
607
505
458
410
363
343
322
302
290
277
265
253
240
228
221
214
207
200
193
185
178
171
164
157
153
148
143
139
134
130
125
121
116
112
108
104
101
97
94
90
86
83
80
76
73
70
67
63
60
57
54
50
47

0.06
0.11
0.16
0.22
0.27
0.32
0.37
0.42
0.48
0.53
0.58
0.63
0.68
0.73
0.79
0.84
0.89
0.95
1.00
1.05
1.11
1.16
1.22
1.27
1.32
1.38
1.43
1.49
1.54
1.60
1.65
1.70
1.76
1.81
1.86
1.92
1.97
2.02
2.08
2.13
2.26
2.38
2.51
2.64
2.76
2.89
3.02
3.15
3.28
3.41
3.54
3.67
3.80
3.93
4.06
4.19
4.32
4.45
4.58

498
490
482
474
465
457
449
441
432
424
416
408
399
391
381
370
360
350
339
329
323
318
312
306
301
295
289
283
278
272
269
267
264
261
259
256
253
251
248
245
241
236
231
226
221
216
211
207
203
200
196
192
188
184
180
177
173
169
165

983
914
845
776
707
638
569
500
453
407
360
339
317
296
285
273
262
250
239
227
221
214
208
202
195
189
183
177
170
164
159
155
150
146
141
137
132
128
123
119
115
112
109
106
102
99
96
92
88
84
80
76
72
68
64
60
56
52
48

Accu-P
0402 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance
C (pF)

Tol.

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
27
30
33
36
39
43
47
51
56
58
68

0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.1
0.1
0.1
0.1
0.1
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%

Self
Resonance
Frequency
(GHz)
Typ.

3.9
3.8
3.8
3.7
3.7
3.6
3.6
3.5
3.4
3.3
3.0
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.2
2.1
2.1
2.0
1.9
1.8
1.8
1.8
1.8
1.8
1.7
1.7
1.7
1.7
1.7
1.6
1.6
1.6
1.6
1.6
1.6

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

513
507
501
495
489
483
477
471
446
416
388
360
338
315
292
268
242
217
202
187
172
157
143
129
121
110
98
87
70
65
60
58
56
53
50
48
44
42
32

282
279
275
272
269
265
262
259
245
229
213
198
186
173
160
148
133
119
111
103
94
87
79
71
67
61
54
48
39
36
33
32
31
29
28
26
24
23
18

4.10
4.20
4.30
4.41
4.51
4.61
4.72
4.82
5.23
5.75
6.41
7.07
7.85
8.62
9.63
10.65
11.77
12.90
14.03
15.17
16.30
17.53
18.75
19.98
21.11
22.25
24.51
27.51
32.01
35.89
40.05
45.13
50.21
56.98
63.75
70.53
78.99
83.54
106.28

545
539
534
528
522
516
511
505
482
453
427
400
378
356
333
310
285
259
241
223
204
187
169
152
143
131
116
104
85
78
74
71
69
66
63
60
56
54
42

47
47
46
46
46
46
45
45
44
43
44
44
45
45
45
45
44
44
44
44
45
44
43
42
42
41
41
37
32
28
27
28
28
29
30
31
33
34
40

4.42
4.55
4.67
4.79
4.92
5.04
5.16
5.29
5.78
6.40
7.26
8.12
9.17
10.22
11.75
13.28
14.98
16.68
18.83
20.97
23.12
25.91
28.70
31.49
33.51
35.53
39.57
54.94
77.98
106.50
NA
NA
NA
NA
NA
NA
NA
NA
NA

235
232
228
225
222
219
216
213
200
184
167
150
139
128
115
103
89
75
68
62
56
50
45
39
36
33
26
21
13
10
NA
NA
NA
NA
NA
NA
NA
NA
NA

47
46
46
46
46
45
45
45
43
42
44
45
47
48
47
47
46
45
47
49
51
49
46
44
44
43
42
35
23
12
NA
NA
NA
NA
NA
NA
NA
NA
NA

4.73
4.87
5.01
5.16
5.30
5.44
5.59
5.73
6.30
7.02
8.11
9.19
10.57
11.95
14.23
16.50
19.04
21.57
25.73
29.89
34.05
41.44
48.82
56.21
60.92
65.63
75.05
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA

162
160
157
154
151
149
146
143
133
119
107
95
86
77
69
61
51
42
38
33
29
25
21
17
15
14
10
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA

48
48
48
48
47
47
47
47
47
46
47
48
49
50
50
49
49
48
49
49
50
49
47
46
47
48
51
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA

13

Accu-P
0603 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance

C (pF)

Tol.

0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
1.2
1.25
1.3
1.35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.85
1.9
1.95
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9

0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05

14

Self
Resonance
Frequency
(GHz)
Typ.

25.6
18.1
14.8
12.8
11.4
10.4
9.7
9.0
8.5
8.1
7.7
7.4
7.1
6.8
6.6
6.4
6.2
6.0
5.9
5.7
5.6
5.4
5.3
5.2
5.1
5.0
4.9
4.8
4.8
4.7
4.6
4.5
4.5
4.4
4.3
4.2
4.2
4.1
4.1
4.0
3.9
3.8
3.8
3.7
3.6
3.6
3.5
3.4
3.4
3.3
3.2
3.2
3.1
3.1
3.1
3.0
3.0
3.0
2.9

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

1200
1156
1111
1067
1022
978
933
889
844
800
788
777
765
754
742
730
719
707
696
684
667
649
632
614
605
596
587
578
569
560
551
542
534
525
516
507
498
490
481
472
462
452
442
433
423
413
403
395
388
380
372
365
357
349
342
334
326
318
311

660
636
611
587
562
538
513
489
464
440
434
427
421
414
408
402
395
389
383
376
367
357
347
338
333
328
323
318
313
308
303
298
293
289
284
279
274
269
264
260
254
249
243
238
232
227
222
217
213
209
205
201
196
192
188
184
179
175
171

0.06
0.11
0.16
0.21
0.26
0.31
0.36
0.41
0.46
0.51
0.57
0.62
0.67
0.72
0.77
0.82
0.87
0.92
0.97
1.019
1.076
1.134
1.192
1.250
1.307
1.365
1.423
1.481
1.538
1.596
1.645
1.694
1.743
1.792
1.841
1.890
1.939
1.988
2.037
2.086
2.190
2.295
2.400
2.504
2.609
2.714
2.818
2.933
3.047
3.162
3.276
3.391
3.506
3.620
3.735
3.849
3.964
4.078
4.193

1333
1284
1235
1185
1136
1086
1037
988
938
889
875
860
846
832
817
803
789
775
760
746
731
717
702
687
677
667
658
648
638
628
620
611
603
595
587
578
570
562
553
545
535
524
514
503
493
482
472
463
453
444
435
425
416
407
397
388
379
369
360

945
675
555
483
433
397
368
345
326
310
296
283
273
263
254
247
239
233
227
216
213
210
206
203
200
197
194
190
187
184
181
178
175
172
169
166
163
160
157
154
151
148
145
143
140
137
134
133
131
130
129
127
126
125
123
122
121
119
118

0.06
0.11
0.16
0.21
0.27
0.32
0.37
0.42
0.47
0.52
0.57
0.62
0.67
0.72
0.78
0.83
0.88
0.93
0.98
1.061
1.126
1.190
1.254
1.318
1.382
1.446
1.511
1.575
1.639
1.703
1.760
1.817
1.874
1.931
1.988
2.045
2.102
2.158
2.215
2.272
2.402
2.532
2.662
2.793
2.923
3.053
3.183
3.336
3.489
3.642
3.795
3.947
4.100
4.253
4.406
4.559
4.712
4.865
5.018

556
535
514
494
473
453
432
412
391
370
363
356
348
341
334
326
319
312
304
297
290
282
275
267
262
257
252
247
242
237
233
228
224
219
215
211
206
202
197
193
187
181
175
168
162
156
150
147
144
140
137
134
131
128
125
121
118
115
112

832
628
533
474
433
402
378
358
341
327
315
304
294
285
277
270
264
258
252
242
239
236
233
230
227
224
221
218
215
212
209
206
203
200
197
194
191
188
185
182
180
177
175
172
170
167
165
164
162
161
160
159
157
156
155
154
152
151
150

0.06
0.11
0.16
0.22
0.27
0.32
0.37
0.42
0.48
0.53
0.58
0.63
0.68
0.73
0.79
0.84
0.89
0.95
1.00
1.101
1.171
1.241
1.311
1.381
1.451
1.521
1.591
1.661
1.731
1.801
1.866
1.930
1.995
2.060
2.124
2.189
2.253
2.318
2.383
2.447
2.604
2.761
2.917
3.074
3.230
3.387
3.543
3.742
3.940
4.139
4.337
4.536
4.734
4.933
5.131
5.330
5.528
5.727
5.925

397
382
367
353
338
323
309
294
279
265
261
258
255
252
248
245
242
239
235
232
226
220
214
209
203
197
191
185
179
173
170
166
163
159
156
153
149
146
142
139
134
129
124
118
113
108
103
100
97
95
92
89
86
84
81
78
75
73
70

880
667
567
505
462
430
404
383
365
350
337
326
315
306
298
290
283
277
271
260
256
253
250
247
244
241
238
235
232
229
226
222
219
216
213
209
206
203
199
196
193
191
188
186
183
181
178
177
175
174
172
171
169
168
166
165
164
162
161

Accu-P
0603 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance
C (pF)

Tol.

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
27
30
33
36
39

0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.1
0.1
0.1
0.1
0.1
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%

Self
Resonance
Frequency
(GHz)
Typ.

2.9
2.8
2.8
2.7
2.7
2.7
2.6
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.3
1.3
1.2
1.2
1.2
1.1
1.0
1.0
1.0
1.0

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

307
303
299
295
291
287
283
279
263
244
228
213
195
176
161
146
129
112
102
92
82
79
76
73
69
65
57
48
43
37
32
27
21

169
167
164
162
160
158
156
154
145
134
126
117
107
97
89
80
71
62
56
51
45
43
42
40
38
36
31
26
24
21
18
15
12

4.301
4.410
4.518
4.627
4.735
4.843
4.952
5.060
5.494
6.035
6.865
7.694
8.367
9.041
10.20
11.37
12.66
13.95
15.31
16.67
18.03
19.61
21.18
22.76
24.37
25.98
29.21
34.44
41.87
49.29
56.72
64.15
71.57

355
351
347
342
338
333
329
324
307
285
267
250
227
205
188
171
153
134
122
111
99
96
92
89
84
80
72
62
56
49
43
37
30

117
116
116
115
114
113
112
112
109
105
102
100
98
96
96
95
95
94
93
92
90
90
90
90
89
89
87
87
86
85
84
83
82

5.188
5.358
5.528
5.698
5.867
6.037
6.207
6.377
7.057
7.906
9.517
11.13
12.63
14.14
18.09
22.05
26.44
30.83
40.37
49.91
59.44
80.00
120.0
190.0
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

110
108
106
104
102
100
98
96
88
78
72
66
57
49
42
36
29
22
18
15
11
8
6
4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

149
148
148
147
146
146
145
144
142
138
133
128
125
123
122
121
120
119
118
118
117
117
116
116
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

6.188
6.450
6.713
6.975
7.238
7.500
7.763
8.025
9.075
10.39
13.66
16.93
20.91
24.88
40.00
70.00
140.0
231.3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

68
67
65
64
62
61
59
58
52
44
40
35
28
21
16
12
6
1
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

160
159
158
157
157
156
155
154
151
147
141
135
132
129
128
127
126
125
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

15

Accu-P
0805 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance

C (pF)

Tol.

0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
1.2
1.25
1.3
1.35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.85
1.9
1.95
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9

0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05

16

Self
Resonance
Frequency
(GHz)
Typ.

17.2
14.1
12.3
11.0
10.1
9.4
8.8
8.3
7.9
7.5
7.2
6.9
6.7
6.5
6.3
6.1
5.9
5.8
5.6
5.5
5.4
5.3
5.1
5.0
4.9
4.9
4.8
4.7
4.6
4.6
4.5
4.4
4.3
4.3
4.2
4.2
4.1
4.1
4.0
3.9
3.8
3.8
3.6
3.6
3.6
3.4
3.4
3.4
3.3
3.3
3.2
3.1
3.1
3.1
3.0
3.0
3.0
2.9

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

880
872
864
857
849
841
833
825
817
811
805
798
792
786
779
773
767
760
754
747
740
732
725
718
711
704
696
689
682
675
668
660
653
646
639
632
624
617
610
597
584
571
557
544
531
518
507
497
486
475
465
454
443
433
422
412
401
390

484
480
475
471
467
462
458
454
450
446
443
439
436
432
429
425
422
418
415
411
407
403
399
395
391
387
383
379
375
371
367
363
359
355
351
347
343
339
336
328
321
314
307
299
292
285
279
273
267
261
256
250
244
238
232
226
220
215

0.125
0.176
0.228
0.279
0.331
0.382
0.433
0.485
0.536
0.584
0.631
0.679
0.726
0.774
0.822
0.869
0.917
0.964
1.012
1.065
1.119
1.172
1.225
1.279
1.332
1.386
1.439
1.492
1.546
1.600
1.654
1.708
1.762
1.816
1.870
1.924
1.978
2.033
2.087
2.183
2.280
2.377
2.474
2.571
2.668
2.764
2.875
2.987
3.098
3.209
3.320
3.431
3.542
3.653
3.764
3.875
3.986
4.097

890
885
880
874
869
864
859
853
848
843
838
834
829
824
819
814
810
805
800
794
788
782
776
770
764
758
752
746
740
733
726
719
712
705
698
691
684
677
670
658
646
634
623
611
599
587
575
564
552
540
528
517
505
493
481
470
458
446

3296
2073
1492
1156
938
787
675
590
523
469
425
387
356
329
306
285
267
251
231
223
215
208
200
192
184
176
169
161
153
151
148
146
143
141
139
136
134
131
129
127
124
122
119
117
114
112
111
110
109
108
107
106
105
104
103
102
101
100

0.125
0.178
0.231
0.284
0.337
0.390
0.443
0.496
0.549
0.600
0.651
0.702
0.753
0.804
0.855
0.906
0.957
1.008
1.059
1.120
1.181
1.242
1.304
1.365
1.426
1.487
1.548
1.609
1.670
1.734
1.799
1.864
1.928
1.993
2.058
2.122
2.187
2.252
2.316
2.440
2.563
2.687
2.810
2.934
3.057
3.181
3.348
3.514
3.681
3.848
4.014
4.181
4.348
4.515
4.681
4.848
5.015
5.182

545
530
516
501
487
472
458
443
429
420
411
402
393
384
375
366
357
348
339
335
330
326
322
318
313
309
305
300
296
292
287
283
278
274
269
265
260
256
251
245
239
233
227
221
215
209
204
199
194
189
183
178
173
168
163
158
153
148

2417
1626
1227
986
825
710
623
555
501
456
419
387
360
337
316
298
282
267
235
228
221
214
207
200
193
186
179
172
165
163
161
159
157
155
152
150
148
146
144
142
139
137
135
133
130
128
127
125
124
123
122
120
119
118
116
115
114
113

0.126
0.181
0.235
0.290
0.344
0.399
0.453
0.508
0.562
0.616
0.670
0.724
0.778
0.832
0.886
0.940
0.994
1.049
1.103
1.170
1.237
1.304
1.371
1.438
1.505
1.573
1.640
1.707
1.774
1.850
1.927
2.003
2.079
2.156
2.232
2.308
2.385
2.461
2.537
2.690
2.843
2.996
3.149
3.301
3.454
3.607
3.850
4.093
4.335
4.578
4.821
5.064
5.307
5.549
5.792
6.035
6.278
6.521

447
434
420
407
394
380
367
353
340
331
322
313
304
295
286
277
268
260
251
247
244
240
237
233
230
226
223
219
216
212
208
204
200
197
193
189
185
181
177
171
165
159
154
148
142
136
132
129
125
121
118
114
110
107
103
99
96
92

2265
1546
1178
955
804
695
613
549
497
454
418
388
362
339
319
301
285
271
242
235
228
220
213
206
199
192
184
177
170
168
165
163
160
158
155
153
150
148
145
143
141
139
136
134
132
130
129
127
126
125
123
122
121
119
118
116
115
114

Accu-P
0805 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance
C (pF)

Tol.

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
27
30
33
36
39
43
47

0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.1
0.1
0.1
0.1
0.1
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%

Self
Resonance
Frequency
(GHz)
Typ.

2.9
2.9
2.8
2.7
2.7
2.7
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.3
1.3
1.3
1.2
1.2
1.1
1.0
1.0
0.9
0.9
0.9
0.8

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

384
378
372
366
360
355
349
343
319
289
264
239
218
198
179
160
139
119
110
101
92
87
83
78
73
67
57
46
41
36
30
25
20
16
12

211
208
205
202
198
195
192
188
175
159
145
131
120
109
99
88
77
65
60
55
51
48
46
43
40
37
31
25
22
20
17
14
11
9
7

4.214
4.331
4.448
4.564
4.681
4.798
4.915
5.032
5.499
6.083
6.842
7.601
8.468
9.334
10.57
11.80
13.17
14.54
16.17
17.79
19.42
21.13
22.85
24.57
26.41
28.26
31.95
35.64
44.94
54.24
63.54
72.84
82.14
102.9
123.7

440
434
428
422
415
409
403
397
373
342
313
283
259
234
213
191
167
143
134
125
116
110
104
99
92
85
72
59
54
48
42
37
31
27
23

99
98
98
97
96
96
95
94
91
88
86
84
83
82
82
81
81
80
80
80
80
79
78
77
77
76
76
75
74
73
72
71
70
66
63

5.378
5.574
5.769
5.965
6.161
6.357
6.553
6.749
7.533
8.513
10.43
12.35
14.84
17.32
24.90
32.48
40.90
49.32
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

144
141
138
134
131
128
124
121
108
91
79
68
61
55
46
37
26
16
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

112
112
111
111
110
110
109
109
107
104
102
101
100
100
100
100
101
101
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

6.861
7.201
7.541
7.881
8.222
8.562
8.902
9.242
10.60
12.30
18.03
23.76
37.25
50.74
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

89
86
84
81
78
75
72
69
58
44
36
28
21
15
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

113
113
112
111
111
110
110
109
107
104
103
102
101
100
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

17

Accu-P
1210 Typical Electrical Tables
Capacitance
@ 1MHz
and Tolerance

C (pF)

Tol.

0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
1.2
1.25
1.3
1.35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.85
1.9
1.95
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9

0.02
0.03
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05

18

Self
Resonance
Frequency
(GHz)
Typ.

15.6
12.7
11.0
9.8
8.9
8.3
7.7
7.3
6.9
6.6
6.3
6.0
5.8
5.6
5.4
5.3
5.1
5.0
5.0
4.9
4.8
4.7
4.6
4.5
4.4
4.3
4.2
4.1
4.1
4.0
3.9
3.9
3.8
3.7
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.9
2.9
2.8
2.8
2.7
2.7
2.7
2.7
2.7
2.6
2.6
2.6
2.6
2.5
2.5
2.5
2.4

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

1190
1179
1168
1156
1145
1134
1123
1112
1101
1090
1079
1068
1057
1046
1035
1023
1012
1001
992
981
969
958
946
935
923
912
900
889
877
862
846
831
815
800
784
769
753
737
722
691
660
644
629
614
598
583
574
566
557
548
540
531
522
514
505
496
488
479

654
648
642
636
630
624
618
612
606
599
593
587
581
575
569
563
557
551
546
539
533
527
521
514
508
502
495
489
483
474
465
457
448
440
431
423
414
406
397
380
363
354
346
338
329
321
316
311
306
302
297
292
287
283
278
273
268
264

0.136
0.190
0.244
0.297
0.351
0.405
0.459
0.513
0.567
0.617
0.666
0.716
0.765
0.815
0.864
0.914
0.963
1.013
1.062
1.107
1.152
1.196
1.241
1.285
1.330
1.375
1.419
1.464
1.508
1.567
1.626
1.685
1.743
1.802
1.861
1.920
1.978
2.037
2.096
2.213
2.331
2.420
2.508
2.597
2.686
2.775
2.875
2.975
3.075
3.174
3.274
3.374
3.474
3.574
3.674
3.773
3.873
3.973

1176
1166
1156
1145
1135
1125
1115
1105
1095
1084
1074
1064
1054
1044
1034
1024
1013
1003
983
975
966
958
950
942
933
925
917
908
900
890
881
871
862
852
843
833
824
814
805
786
767
747
728
709
689
670
659
647
636
625
613
602
591
579
568
556
545
534

3633
2129
1457
1086
854
697
584
500
435
384
342
308
279
255
234
216
201
187
167
163
158
154
150
146
142
138
134
129
125
123
122
120
118
116
114
112
110
108
107
103
99
97
96
94
93
91
90
89
88
87
87
86
85
84
83
82
81
80

0.136
0.190
0.244
0.299
0.353
0.408
0.462
0.516
0.571
0.621
0.672
0.723
0.774
0.824
0.875
0.926
0.976
1.027
1.078
1.124
1.170
1.217
1.263
1.309
1.355
1.402
1.448
1.494
1.541
1.618
1.694
1.771
1.848
1.925
2.002
2.079
2.156
2.233
2.310
2.464
2.618
2.681
2.744
2.807
2.870
2.933
3.047
3.162
3.276
3.390
3.504
3.619
3.733
3.847
3.961
4.076
4.190
4.304

606
597
589
581
573
565
557
549
541
532
524
516
508
500
492
484
476
467
459
451
443
435
427
419
410
402
394
386
378
371
363
356
349
342
334
327
320
313
305
291
276
268
259
251
242
234
230
227
223
220
216
213
209
206
202
198
195
191

2149
1407
1042
826
683
581
505
447
400
362
331
304
282
262
245
230
217
205
170
167
165
162
160
157
155
152
150
147
144
143
142
140
139
138
136
135
134
132
131
128
126
123
121
118
116
114
113
112
111
110
109
108
107
106
105
104
103
102

0.136
0.191
0.246
0.301
0.356
0.411
0.466
0.521
0.576
0.627
0.679
0.731
0.783
0.834
0.886
0.938
0.989
1.041
1.093
1.141
1.189
1.236
1.284
1.332
1.380
1.428
1.476
1.524
1.572
1.638
1.704
1.770
1.836
1.902
1.968
2.034
2.100
2.167
2.233
2.365
2.497
2.613
2.729
2.845
2.961
3.077
3.205
3.334
3.462
3.590
3.718
3.847
3.975
4.103
4.231
4.359
4.488
4.616

450
444
438
432
426
421
415
409
403
397
391
385
379
374
368
362
356
350
344
338
331
325
318
312
305
299
293
286
280
274
268
262
256
250
244
239
233
227
221
209
198
191
185
179
173
167
164
161
157
154
151
148
145
141
138
135
132
129

2068
1370
1023
816
678
580
506
449
404
366
335
309
287
267
250
236
222
210
177
174
172
169
167
164
162
159
156
154
151
150
149
148
147
145
144
143
142
141
139
137
135
132
130
128
126
123
122
121
121
120
119
118
117
116
115
114
113
112

Capacitance
@ 1MHz
and Tolerance
C (pF)

Tol.

4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
27
30
33
36
39
43
47
82

0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.1
0.1
0.1
0.1
0.1
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%

Self
Resonance
Frequency
(GHz)
Typ.

2.4
2.4
2.4
2.3
2.3
2.3
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.7
1.6
1.5
1.5
1.4
1.3
1.3
1.2
1.2
1.2
1.1
1.1
1.1
1.0
1.0
0.9
0.9
0.8
0.8
0.8
0.7
0.7
0.7

Q Standard Value
@ 1GHz

Frequency
900MHz

Frequency
1900MHz

Frequency
2400MHz

Typ.

Min.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

C(eff)
(pF) Typ.

Q
Typ.

ESR
(mOhm) Typ.

473
467
462
456
450
444
438
432
408
379
355
330
308
285
266
247
225
204
193
181
169
164
159
154
150
145
136
126
112
101
90
79
68
54
39
17

260
257
254
251
247
244
241
238
225
208
195
182
169
157
146
136
124
112
106
99
93
90
88
85
82
80
75
70
62
56
50
44
38
30
21
10

4.083
4.192
4.302
4.411
4.521
4.630
4.740
4.849
5.288
5.835
6.440
7.044
7.823
8.601
9.600
10.60
11.71
12.82
13.97
15.13
16.28
17.51
18.75
19.98
21.21
22.43
24.88
27.34
31.02
36.14
41.27
46.39
51.52
58.35
65.18
148.400

528
522
516
511
505
499
493
487
464
435
408
380
351
322
304
285
265
244
230
215
200
195
189
183
178
172
162
151
135
121
108
95
82
64
46
24

79
78
78
77
76
75
75
74
71
67
65
62
61
60
58
57
56
54
53
53
52
51
50
49
49
49
49
48
48
48
48
48
48
48
48
48

4.435
4.565
4.695
4.825
4.956
5.086
5.216
5.347
5.868
6.519
7.176
7.832
8.927
10.02
11.55
13.09
14.79
16.49
18.64
20.80
22.95
26.01
29.07
32.14
36.34
40.55
48.96
57.38
70.00
n/a
n/a
n/a
n/a
n/a
n/a
n/a

189
186
183
180
178
175
172
170
159
145
137
129
115
100
93
85
76
68
61
55
48
46
43
41
39
38
34
31
26
n/a
n/a
n/a
n/a
n/a
n/a
n/a

101
100
100
99
98
98
97
96
93
90
86
83
81
78
77
76
74
73
72
71
70
69
67
66
66
65
64
63
62
n/a
n/a
n/a
n/a
n/a
n/a
n/a

4.768
4.919
5.071
5.223
5.375
5.526
5.678
5.830
6.437
7.195
7.897
8.599
10.08
11.55
13.93
16.30
18.94
21.57
26.09
30.61
35.13
46.51
57.90
69.29
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

127
125
123
121
119
117
115
113
106
96
91
85
74
63
57
50
43
36
32
28
24
22
19
17
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

112
111
110
110
109
108
108
107
105
102
96
91
89
87
85
84
82
81
80
79
78
76
75
73
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a

19

Accu-P
High Frequency Characteristics
Accu-P 01005 Typical SRF vs Capacitance
2.5

Capacitance (pF)

1.5
1
0.5
0

10

15

20
SRF (GHz)

25

30

35

Measured on HP8720ES

Accu-P 01005 Typical ESR vs Frequency

ESR (m)

10000

0.5pF
0.8pF
1.0pF
1.2pF
1.8pF

1000

100
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 01005 Typical Q vs Frequency

1000

1.0pF
0.8pF
2.4pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

20

Accu-P
High Frequency Characteristics
Accu-P 0201 Typical SRF vs Capacitance
35.0

Capacitance (pF)

30.0
25.0

20.0
15.0
10.0
5.0
0.0
0

10
15
SRF (GHz)

20

25

Measured on HP8720ES

Accu-P 0201 Typical ESR vs Frequency


1000

ESR (m)

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF
15pF

100
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 0201 Typical Q vs Frequency

1000

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF
15pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

21

Accu-P
High Frequency Characteristics
Accu-P 0402 Typical SRF vs Capacitance
30.0

Capacitance (pF)

25.0

20.0
15.0
10.0
5.0
0.0
0

10

20

30
40
SRF (GHz)

50

60

70

Measured on HP8720ES

Accu-P 0402 Typical ESR vs Frequency

ESR (m)

1000

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF

100

50
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 0402 Typical Q vs Frequency

1000

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

22

Accu-P
High Frequency Characteristics
Accu-P 0603 Typical SRF vs Capacitance
30.0

Capacitance (pF)

25.0
20.0

15.0
10.0
5.0
0.0
0

10

15

20
25
SRF (GHz)

30

35

40

Measured on HP8720ES

Accu-P 0603 Typical ESR vs Frequency


350
300
0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF

ESR (m)

250
200
150
100
50
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 0603 Typical Q vs Frequency

1000

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

23

Accu-P
High Frequency Characteristics
Accu-P 0805 Typical SRF vs Capacitance
20
18
Capacitance (pF)

16

14
12
10
8
6
4
2
0
0

10

20
30
SRF (GHz)

40

50

Measured on HP8720ES

Accu-P 0805 Typical ESR vs Frequency


350
300
0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
8.2pF

ESR (m)

250
200
150
100
50
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 0805 Typical Q vs Frequency

1000

0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF
8.2pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

24

Accu-P
High Frequency Characteristics
Accu-P 1210 Typical SRF vs Capacitance
20
18
Capacitance (pF)

16
14

12
10
8
6
4
2
0
0

10

15

20
25
30
SRF (GHz)

35

40

45

50

Measured on HP8720ES

Accu-P 1210 Typical ESR vs Frequency


300
250
0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF
15pF

ESR (m)

200
150
100
50
0
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

Accu-P 1210 Typical Q vs Frequency

1000
0.8pF
1.2pF
1.8pF
2.2pF
3.3pF
4.7pF
6.8pF
15pF

100

10
800

1000 1200 1400 1600 1800 2000 2200 2400 2600


Frequency (MHz)

Measured on Agilent 4278A/4991A

25

Accu-P
Environmental / Mechanical Characteristics
ENVIRONMENTAL CHARACTERISTICS
TEST

CONDITIONS

REQUIREMENT

Life (Endurance)
MIL-STD-202F Method 108A

125C, 2UR,1000 hours

No visible damage
C/C 2% for C5pF
C 0.25pF for C<5pF

Accelerated Damp
Heat Steady State
MIL-STD-202F Method 103B

85C, 85% RH, UR, 1000 hours

No visible damage
C/C 2% for C5pF
C 0.25pF for C<5pF

Temperature Cycling
MIL-STD-202F Method 107E
MIL-STD-883D Method 1010.7

-55C to +125C, 15 cycles Accu-P

No visible damage
C/C 2% for C5pF

Resistance to Solder Heat


IEC-68-2-58

260C 5C for 10 secs

C 0.25pF for C<5pF


C remains within initial limits

MECHANICAL CHARACTERISTICS
TEST
Solderability
IEC-68-2-58
Leach Resistance
IEC-68-2-58
Adhesion
MIL-STD-202F Method 211A
Termination Bond Strength
IEC-68-2-21 Amend. 2

CONDITIONS

REQUIREMENT

Components completely immersed in a


solder bath at 235C for 2 secs.
Components completely immersed in a
solder bath at 2605C for 60 secs.
A force of 5N applied for 10 secs.

Terminations to be well tinned, minimum 95%


coverage
Dissolution of termination faces 15% of area
Dissolution of termination edges 25% of length
No visible damage

Tested as shown in diagram

No visible damage
C/C 2% for C5pF
C 0.25pF for C<5pF

D = 3mm Accu-P
D = 1mm Accu-F

Robustness of Termination
IEC-68-2-21 Amend. 2
High Frequency Vibration
MIL-STD-202F Method 201A,
204D (Accu-P only)
Storage

45mm

A force of 5N applied for 10 secs.

No visible damage

55Hz to 2000Hz, 20G

No visible damage

12 months minimum with components


stored in as received packaging

Good solderability

QUALITY & RELIABILITY


Accu-P is based on well established thin-film technology
and materials.

ON-LINE PROCESS CONTROL


This program forms an integral part of the production cycle
and acts as a feedback system to regulate and control
production processes. The test procedures, which are
integrated into the production process, were developed
after long research work and are based on the highly
developed semiconductor industry test procedures and
equipment. These measures help AVX to produce a consistent and high yield line of products.

FINAL QUALITY INSPECTION


Finished parts are tested for standard electrical parameters
and visual/mechanical characteristics. Each production lot
is 100% evaluated for: capacitance and proof voltage at
2.5 UR. In addition, production is periodically evaluated for:

26

45mm

Average capacitance with histogram printout for


capacitance distribution;
IR and Breakdown Voltage distribution;
Temperature Coefficient;
Solderability;
Dimensional, mechanical and temperature stability.

QUALITY ASSURANCE
The reliability of these thin-film chip capacitors has been
studied intensively for several years. Various measures
have been taken to obtain the high reliability required today
by the industry. Quality assurance policy is based on well
established international industry standards. The reliability
of the capacitors is determined by accelerated testing
under the following conditions:
Life (Endurance)
125C, 2UR, 1000 hours
Accelerated Damp
Heat Steady State
85C, 85% RH, UR,
1000 hours.

Accu-P
Performance Characteristics RF Power Applications
ESR and therefore RF heating. Values of ESR for
Accu-P capacitors are significantly less than those of
ceramic MLC components currently available.

RF POWER APPLICATIONS
In RF power applications capacitor losses generate heat. Two
factors of particular importance to designers are:
Minimizing the generation of heat.
Dissipating heat as efficiently as possible.

HEAT DISSIPATION
Heat is dissipated from a capacitor through a variety of
paths, but the key factor in the removal of heat is the
thermal conductivity of the capacitor material.
The higher the thermal conductivity of the capacitor, the
more rapidly heat will be dissipated.
The table below illustrates the importance of thermal
conductivity to the performance of Accu-P in power
applications.

CAPACITOR HEATING
The major source of heat generation in a capacitor in RF
power applications is a function of RF current (I) and ESR,
from the relationship:
Power dissipation = I2RMS x ESR
Accu-P capacitors are specially designed to minimize

PRODUCT
Accu-P
Microwave MLC

Amps

MATERIAL
Alumina
Magnesium Titanate

THERMAL CONDUCTIVITY W/mK


18.9
6.0

Power Handling
Accu-P 10pF
Data used in calculating the graph:
Thermal impedance of capacitors:

6
1210
1210
0805

0805
0603
0402

2
0
0

0402
17C/W
0603
12C/W
0805
6.5C/W
1210
5C/W
Thermal impedance measured using RF generator,
amplifier and strip-line transformer.
ESR of capacitors measured on Boonton 34A

200 400 600 800 1000 1200 1400MHz

THERMAL IMPEDANCE
Thermal impedance of Accu-P chips is shown below compared with the thermal impedance of Microwave MLCs.

CAPACITOR TYPE
Accu-P
Microwave MLC

CHIP SIZE
0805
1210
0505
1210

ADVANTAGES OF ACCU-P
IN RF POWER CIRCUITS
The optimized design of Accu-P offers the designer of RF
power circuits the following advantages:
Reduced power losses due to the inherently low ESR of
Accu-P.
Increased power dissipation due to the high thermal
conductivity of Accu-P.
THE ONLY TRUE TEST OF A CAPACITOR IN ANY PARTICULAR
APPLICATION IS ITS PERFORMANCE UNDER OPERATING
CONDITIONS IN THE ACTUAL CIRCUIT.

The thermal impedance expresses the temperature difference


in C between chip center and termination caused by
a power dissipation of 1 watt in the chip. It is expressed in
C/W.

THERMAL IMPEDANCE (C/W)


6.5
5
12
7.5

PRACTICAL APPLICATION
IN RF POWER CIRCUITS
There is a wide variety of different experimental methods
for measuring the power handling performance of a
capacitor in RF power circuits. Each method has its
own problems and few of them exactly reproduce the
conditions present in real circuit applications.
Similarly, there is a very wide range of different circuit applications, all with their unique characteristics and operating
conditions which cannot possibly be covered by such
theoretical testing.

27

Accu-P
Application Notes
GENERAL

HANDLING

Accu-P SMD capacitors are designed for soldering to printed


circuit boards or other substrates. The construction of the
components is such that they will withstand the time/temperature profiles used in both wave and reflow soldering methods.

1
CIRCUIT BOARD TYPE
The circuit board types which may be used with Accu-P are
as follows:
All flexible types of circuit boards
(eg. FR-4, G-10) and also alumina.
For other circuit board materials, please consult factory.

SMD capacitors should be handled with care to avoid damage


or contamination from perspiration and skin oils. The use of
plastic tipped tweezers or vacuum pick-ups is strongly recommended for individual components. Bulk handling should
ensure that abrasion and mechanical shock are minimized. For
automatic equipment, taped and reeled product gives the
ideal medium for direct presentation to the placement
machine.

COMPONENT PAD DESIGN


Component pads must be designed to achieve good
joints and minimize component movement during reflow
soldering. Pad designs are given below for both wave and
reflow soldering.
The basis of these designs is:
a. Pad width equal to component width. It is permissible to
decrease this to as low as 85% of component width but
it is not advisable to go below this.
b. Pad overlap 0.5mm beneath large components. Pad
overlap about 0.3mm beneath small components.
c. Pad extension of 0.5mm for reflow of large components
and pad extension about 0.3mm for reflow of small components. Pad extension about 1.0mm for wave soldering.

REFLOW SOLDERING
PAD DIMENSIONS: millimeters (inches)
01005
Accu-P

0201
Accu-P

0402
Accu-P

0603
Accu-P

0805
Accu-P

1210
Accu-P

0.17
(0.007)
0.22
(0.009)

0.26
(-0.010)
0.20
(0.008)

0.6
(0.024)

0.26
0.78
(0.030) (-0.010)
0.26
(-0.010)

1.7
(0.068)

0.85
(0.033)

0.5
(0.020)

2.3
(0.091)

0.34
(0.013)
0.6
(0.024)

1.0
(0.039)

0.6
(0.024)
3.0
(0.118)

0.85
(0.033)
0.55
(0.022)

1.0
(0.039)

1.0
(0.039)

4.0
(0.157)

2.0
(0.079)

0.8 (0.031)
1.0
(0.039)

1.25 (0.049)
1.0
(0.039)

2.5 (0.098)

28

Accu-P
Application Notes
PREHEAT & SOLDERING

CLEANING RECOMMENDATIONS

The rate of preheat in production should not exceed 4C/


second and a recommended maximum is about 2C/second.
Temperature differential from preheat to soldering should not
exceed 100C.
For further specific application or process advice, please consult
AVX.

Care should be taken to ensure that the devices are


thoroughly cleaned of flux residues, especially the space
beneath the device. Such residues may otherwise become
conductive and effectively offer a lossy bypass to the device.
Various recommended cleaning conditions (which must be
optimized for the flux system being used) are as follows:
Cleaning liquids. . . . . . . i-propanol, ethanol, acetylacetone,
water and other standard PCB
cleaning liquids.
Ultrasonic conditions . . power-20w/liter max.
frequency-20kHz to 45kHz.
Temperature . . . . . . . . . 80C maximum (if not otherwise
limited by chosen solvent system).
Time . . . . . . . . . . . . . . . 5 minutes max.

COOLING
After soldering, the assembly should preferably be allowed
to cool naturally. In the event of assisted cooling, similar
conditions to those recommended for preheating should be
used.

HAND SOLDERING & REWORK


Hand soldering is permissible. Preheat of the PCB to 150C is
required. The most preferable technique is to use hot air soldering tools. Where a soldering iron is used, a temperature
controlled model not exceeding 30 watts should be used and
set to not more than 260C.

STORAGE CONDITIONS
Recommended storage conditions for Accu-P prior to use
are as follows:
Temperature . . . . . . . . . . 15C to 35C
Humidity . . . . . . . . . . . . . 65%
Air Pressure . . . . . . . . . . 860mbar to 1060mbar

220
210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20

RECOMMENDED REFLOW
SOLDERING PROFILE
LEAD FREE
COMPONENTS WITH
Sn100 TERMINATIONS
330

Assembly exits heat


no forced cooldown

Peak Temperature = 260C

260
250
Assembly enters the
preheat zone

Additional soak time


to allow uniform
heating of the
substrate

45-60 sec.
above solder
melting point

186C solder melting


temperature

200

Temp (C)

COMPONENT LAND TEMP (DEG C)

RECOMMENDED REFLOW
SOLDERING PROFILE
COMPONENTS WITH
SnPb TERMINATIONS

150

100
Soak time
1) Activates the flux
2) Allows center of board
temperatures to catch up with
corners

50

0
0:00

0:43

1:28

2:10

2:53

3:36

4:19

5:02

5:48

6:29

Time
0

0.5

1.5

2.5

3.5

4.5

Time (mins)

29

Accu-P
Automatic Insertion Packaging
TAPE & REEL

All tape and reel specifications are in compliance with EIA 481-1-A.
(equivalent to IEC 286 part 3).
8mm carrier
Reeled quantities: Reels of 3,000 per 7" reel or 10,000 pieces per 13" reel
01005, 0201 and 0402 = 5,000 pieces per 7" reel and 20,000 pieces per 13" reel

REEL
DIMENSIONS: millimeters (inches)
A(1)
1801.0
(7.0870.039)

B
1.5 min.
(0.059 min.)

C
130.2
(0.512 0.008)

D
20.2 min.
(0.795 min.)

E
50 min.
(1.969 min.)

F
9.61.5
(0.370 0.050)

G
14.4 max.
(0.567 max.)

Metric dimensions will govern.


Inch measurements rounded and for reference only.
(1) 330mm (13 inch) reels are available.

G MAX.
B*
A

C
E

D*

FULL RADIUS
F

*DRIVE SPOKES OPTIONAL


IF USED, ASTERISKED
DIMENSIONS APPLY.

CARRIER
DIMENSIONS: millimeters (inches)
A
8.0 0.3
(0.315 0.012)

B
3.5 0.05
(0.138 0.002)

C
1.750.1
(0.069 0.004)

D
2.0 0.05
(0.079 0.002)

E
4.0 0.1
(0.157 0.004)

F
1.5 +0.1
-0.0
(0.059 +0.004
-0.000 )

The nominal dimensions of the component compartment (W,L) are derived from the component size.

E
D

10 PITCHES
CUMULATIVE
TOLERANCE ON
TAPE 0.2
C

TOP
TAPE

P = 4mm for 0603, 0805, 1210


P = 2mm for C005, 0201 and 0402

P
DIRECTION OF FEED

CENTER LINES
OF CAVITY

AVX reserves the right to change the information published herein without notice.

30

Thin-Film RF/Microwave
Inductor Technology
Accu-L

31

Accu-L 0201 Tight Tolerance


SMD RF Thin Film Tuning Inductor
ACCU-L TECHNOLOGY
The L0201 SMD Tuning Inductor is based on thin-film multilayer
technology. The technology provides a miniature part with
excellent high frequency performance and rugged construction
for reliable automatic assembly.

APPLICATIONS

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs
Filters
Matching Networks

HOW TO ORDER
L0201

XXX

TR

Inductance
(nH)

Tolerance

Series

Lead Free
Termination

Taped &
Reeled

P/N Example: L02013R3BHSTR

QUALITY INSPECTION

TERMINATION

Finished parts are 100% tested for electrical parameters and


visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

Nickel/Lead Free solder coating compatible with automatic


soldering technologies: reflow, wave soldering, vapor phase
and manual.

DIMENSIONS:
(TOP View)

millimeters (inches)

Recommended Pad Layout Dimensions

B1

T
L

W
T

32

0.6000.050
(0.0240.002)
0.3250.050
(0.0130.002)
0.2250.050
(0.0090.002)

0.78
(0.031)

0.26
(0.010)
0.26
(0.010)

B2

0.26
(0.010)

B1
B2

0.1000.100
(0.0040.004)
0.1500.050
(0.0060.002)

0.34
(0.013)

mm (inches)

Accu-L 0201 Tight Tolerance


SMD RF Thin Film Tuning Inductor
ELECTRICAL SPECIFICATIONS
L(nH)
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3

450MHz
Tolerance
A=0.05nH , B=0.1nH,
C=0.2nH, D=0.5nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.05nH , 0.1nH , 0.2nH
0.1nH , 0.2nH , 0.5nH
0.1nH , 0.2nH , 0.5nH
0.1nH , 0.2nH , 0.5nH
0.1nH , 0.2nH , 0.5nH
0.1nH , 0.2nH , 0.5nH

900MHz

1900MHz

2400MHz

Q
(min)

Q
(Typ)

Q
(Typ)

Q
(Typ)

SRF
min.
(GHz)

RDC
max.
()

IDC
max.
(mA)

13
11
10
9
8
8
7
7
7
7
7
7
7

24
23
18
16
19
19
16
16
16
15
15
15
15

36
34
26
24
28
28
26
26
26
25
22
22
22

39
38
30
27
32
32
30
30
30
29
24
24
24

35
33
32
31
30
28
26
24
23
20
18
14
13

0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.3
0.5
0.5
0.6
0.7
1.0

550
550
550
500
500
400
400
300
250
250
200
180
150

All intermediate Inductance values within the indicated range are available.

33

L0402 Tight Tolerance


RF Inductor
GENERAL DESCRIPTION
ITF TECHNOLOGY

DIMENSIONS:
(Bottom View)

The L0402 LGA Inductor is based on thin-film multilayer technology.


The technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.

millimeters (inches)

S
B

A
H

APPLICATIONS

LAND GRID ARRAY


ADVANTAGES

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs
Filters
Matching Networks

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation

T
L
W

L
W

HOW TO ORDER
L0402

XXX

TR

Inductance
(nH)

Tolerance

Series

LGA
Termination
Sn100

Taped &
Reeled

1.000.10
(0.0390.004)
0.580.07
(0.0230.003)
0.350.10
(0.0140.004)

P/N Example: L04023R3BHNTR

0.480.05
(0.0190.002)
0.170.05
(0.0070.002)
0.0640.05
(0.0030.002)

A
B
S, H

LEAD-FREE COMPATIBLE
COMPONENT

QUALITY INSPECTION

TERMINATION

Finished parts are 100% tested for electrical parameters and


visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

Nickel/Lead Free solder coating compatible with automatic


soldering technologies: reflow, wave soldering, vapor phase
and manual.

MAKING AND ORIENTATION IN TAPE

Recommended Pad Layout Dimensions

mm (inches)

(Top View)

0.7
(0.028)

0.6 (0.024)

1.6 (0.063)

34

L0402 Tight Tolerance


RF Inductor
ELECTRICAL SPECIFICATIONS
L(nH)
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8

450MHz
Tolerance
A=0.05nH , B=0.1nH,
C=0.2nH, D=0.5nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH, 0.2nH
0.05nH, 0.1nH, 0.2nH
0.05nH, 0.1nH, 0.2nH
0.05nH, 0.1nH, 0.2nH
0.05nH, 0.1nH, 0.2nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH

900MHz

1900MHz

2400MHz

Q
(min)

Q
(Typ)

Q
(Typ)

Q
(Typ)

Q
(Typ)

SRF
min.
(MHz)

RDC
max.
()

IDC
max.
(mA)

35
30
25
20
20
20
18
15
15
15
13
13
13
12

45
40
40
30
30
25
20
20
20
20
20
20
20
15

55
50
50
35
30
30
30
25
25
25
20
20
20
20

65
60
60
40
40
40
35
35
35
35
30
30
30
25

75
70
70
50
45
40
40
40
40
40
30
30
30
30

20000
20000
20000
20000
20000
18000
16000
15000
9500
8500
8000
7500
7000
6500

0.02
0.04
0.06
0.15
0.20
0.20
0.20
0.20
0.25
0.40
0.45
0.45
0.65
0.90

1000
750
500
500
400
400
400
400
250
250
250
250
200
200

Please contact factory for intermediate inductance values within the indicated range.

35

Accu-L
SMD High-Q RF Inductor

2
10 nH Inductor (Top View)

ACCU-L TECHNOLOGY
The Accu-L SMD Inductor is based on thin-film multilayer
technology. This technology provides a level of control on the
electrical and physical characteristics of the component which
gives consistent characteristics within a lot and lot-to-lot.
The original design provides small size, excellent highfrequency performance and rugged construction for reliable
automatic assembly.

The Accu-L inductor is particularly suited for the telecommunications industry where there is a continuing trend
towards miniaturization and increasing frequencies. The
Accu-L inductor meets both the performance and tolerance
requirements of present cellular frequencies 450MHz and
900MHz and of future frequencies, such as 1700MHz,
1900MHz and 2400MHz.

FEATURES

APPLICATIONS

High Q
RF Power Capability
High SRF
Low DC Resistance
Ultra-Tight Tolerance on Inductance
Standard 0603 and 0805 Chip Size
Low Profile
Rugged Construction
Taped and Reeled

DIMENSIONS: millimeters (inches)

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Locations Systems
Filters
Matching Networks

0603

L
W

W
T

T
L

36

1.60.10
(0.0630.004)
0.810.10
(0.0320.004)
0.610.10
(0.0240.004)
top: 0.0 +0.3/-0.0
(0.0+0.012)
bottom:
0.350.20
(0.0140.008)

0805
2.110.10
(0.0830.004)
1.50.10
(0.0590.004)
0.910.13
(0.0360.005)
0.250.15
(0.0100.006)

Operating/Storage
Temp. Range:
-55C to +125C

Accu-L 0603 and 0805


SMD High-Q RF Inductor
HOW TO ORDER
L

0805

4R7

TR

Product
Inductor

Size

Inductance

0603
0805

Expressed in nH
(2 significant digits +
number of zeros)

Tolerance
for
L 4.7nH,

Specification
Code

Termination
Code

Packaging
Code

W = Nickel/
solder coated
(Sn 63, Pb 37)
**S = Nickel/
Lead Free
Solder coated
(Sn100)

TR = Tape and Reel


(3,000/reel)

for
values <10nH,
Not RoHS Compliant

E = Accu-L 0805
technology
G = Accu-L 0603
technology

B = 0.1nH
C = 0.2nH
D = 0.5nH

letter R denotes
decimal point.
Example:
22nH = 220
4.7nH = 4R7

4.7nH<L<10nH,
C = 0.2nH
D = 0.5nH

**RoHS compliant

L 10nH,
G = 2%
J = 5%

Engineering Kits Available


see pages 118-119

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

ELECTRICAL SPECIFICATIONS TABLE FOR ACCU-L 0603


450 MHz
Test Frequency
Available

900 MHz
Test Frequency

Inductance
L (nH)

Inductance Tolerance

Q
Typical

1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0

0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2, 0.5nH
0.1, 0.2, 0.5nH
0.1, 0.2, 0.5nH
0.2, 0.5nH
0.2, 0.5nH
0.2, 0.5nH
2%, 5%
2%, 5%
2%, 5%

49
26
20
20
21
24
25
23
26
23
23
28
28
28

L (nH)

1900 MHz
Test Frequency

2400 MHz
Test Frequency

Q
Typical

L (nH)

Q
Typical

L (nH)

Q
Typical

70
39
30
30
30
35
57
32
36
33
31
39
38
38

1.2
1.52
1.73
2.24
2.75
3.39
4.06
4.92
5.94
7.3
10
11.8
14.1
25.9

134
63
50
49
48
56
60
46
54
47
35
47
30
30

1.2
1.52
1.72
2.24
2.79
3.47
4.21
5.2
6.23
8.1
12.1
14.1
17.2
49.8

170
76
59
56
54
64
69
49
60
39
31
41
20
15

1.2
1.54
1.74
2.2
2.7
3.33
3.9
4.68
5.65
6.9
8.4
10
13.2
16.2

(1) IDC measured for 15C rise at 25C ambient temperature when soldered to FR-4 board.

SRF min
(MHz)

RDC max
()

10000
10000
10000
10000
9000
8400
6500
5500
5000
4500
3800
3500
3000
2500

0.04
0.06
0.07
0.08
0.08
0.08
0.12
0.15
0.25
0.30
0.35
0.45
0.50
0.60

IDC max
(mA)
(1)
1000
1000
1000
1000
750
750
500
500
300
300
300
300
300
300

Inductance and Q measured on Agilent 4291B / 4287 using the 16196A test fixture.

ELECTRICAL SPECIFICATIONS TABLE FOR ACCU-L 0805


450 MHz
Test Frequency
Available

900 MHz
1700 MHz
2400 MHz
Test Frequency Test Frequency Test Frequency

Inductance
L (nH)

Inductance Tolerance

Q
Typical

L (nH)

Q
Typical

L (nH)

Q
Typical

L (nH)

Q
Typical

1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22

0.1nH, 0.2nH, 0.5nH


0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.5nH
0.5nH
0.5nH
2%, 5%
2%, 5%
2%, 5%
2%, 5%
2%, 5%

60
50
50
42
42
38
27
43
50
43
43
46
40
36
30
36

1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.8
5.7
7.0
8.5
10.6
12.9
16.7
21.9
27.5

92
74
72
62
62
46
36
62
68
62
56
60
50
46
27
33

1.2
1.5
1.8
2.2
2.8
3.4
4.0
5.3
6.3
7.7
10.0
13.4
17.3
27

122
102
88
82
80
48
38
76
73
71
55
52
40
23

1.2
1.5
1.9
2.3
2.9
3.5
4.1
5.8
7.6
9.4
15.2

92
84
73
72
70
57
42
60
62
50
32

(1) IDC measured for 15C rise at 25C ambient temperature


(2) IDC measured for 70C rise at 25C ambient temperature

SRF min
(MHz)
10000
10000
10000
10000
10000
10000
10000
5500
4600
4500
3500
2500
2400
2200
1700
1400

IDC max
(mA)
RDC max
T = 15C
T = 70C
()
0.05
0.05
0.06
0.07
0.08
0.11
0.20
0.10
0.10
0.11
0.12
0.13
0.20
0.20
0.35
0.40

(1)

(2)

1000
1000
1000
1000
1000
750
750
750
750
750
750
750
750
750
500
500

2000
2000
2000
2000
2000
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000

L, Q, SRF measured on HP 4291A, Boonton 34A and Wiltron 360


Vector Analyzer, RDC measured on Keithley 580 micro-ohmmeter.

37

Accu-L 0603 and 0805


SMD High-Q RF Inductor
L0603

Typical Inductance vs. Frequency


L0603
100

1.2nH

15nH

L (nH)

180
160
140
120
Q 100
80
60
40
20
0

Typical Q vs. Frequency


L0603

1.5nH
5.6nH

10

8.2nH
15nH
0

Frequency (GHz)

2
1
1.5
Frequency (GHz)

0.5

8.2nH
6.8nH
4.7nH
3.3nH
2.2nH
1.8nH
1.2nH
2.5

Measured on AGILENT 4291B/4287


using the 16196A test fixture

Measured on AGILENT 4291B/4287


using the 16196A test fixture

Typical Q vs. Frequency


L0805

Typical Inductance vs. Frequency


L0805

L0805
140

100

120

Inductance (nH)

1.2nH

100

1.5nH

80
Q

1.8nH

5.6nH

60

10nH

22nH
15nH
10nH

10

5.6nH

40
15nH

20

1.8nH

22nH

0
0.1

0.01

0.1

10

1
Frequency (GHz)

Measured on HP4291A and


Boonton 34A Coaxial Line

Measured on HP4291A and


Wiltron 360 Vector Analyzer

Maximum Temperature Rise


at 25C ambient temperature (on FR-4)
L0805
200

15nH

10nH

T (C)

100

6.8nH4.7nH
2.7nH

10

0.5

1.5
2
Current (A)

2.5

Temperature rise will typically be no higher than shown by the graph

38

Frequency (GHz)

3.5

10

Accu-L 0603 and 0805


SMD High-Q RF Inductor
FINAL QUALITY INSPECTION
Finished parts are tested for electrical parameters and visual/
mechanical characteristics.

Parts are 100% tested for inductance at 450MHz. Parts are


100% tested for RDC. Each production lot is evaluated on a
sample basis for:
Q at test frequency
Static Humidity Resistance: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

2
ENVIRONMENTAL CHARACTERISTICS
TEST
Solderability
Leach Resistance

Storage
Shear

Rapid Change of
Temperature
Bend Strength

CONDITIONS
Components completely immersed in
a solder bath at 235 5C for 2 secs.
Components completely immersed in
a solder bath at 260 5C for 60 secs.
12 months minimum with components
stored in as received packaging.
Components mounted to a substrate.
A force of 5N applied normal to the
line joining the terminations and in
a line parallel to the substrate.
Components mounted to a substrate.
5 cycles -55C to +125C.
Tested as shown in diagram
1mm
deflection
45mm

Temperature
Coefficient of
Inductance
(TCL)

Component placed in
environmental chamber
-55C to +125C.

REQUIREMENT
Terminations to be well tinned.
No visible damage.
Dissolution of termination faces
15% of area.
Dissolution of termination edges
25% of length.
Good solderability
No visible damage

No visible damage
No visible damage

45mm

+0 to +125 ppm/C
6
L2-L1
TCL =
10
(typical)
L1 (T2-T1)
T1 = 25C

39

Accu-L
Application Notes
HANDLING

HAND SOLDERING & REWORK

SMD chips should be handled with care to avoid damage or


contamination from perspiration and skin oils. The use of
plastic tipped tweezers or vacuum pick-ups is strongly
recommended for individual components. Bulk handling
should ensure that abrasion and mechanical shock are minimized. For automatic equipment, taped and reeled product
is the ideal medium for direct presentation to the placement
machine.

Hand soldering is permissible. Preheat of the PCB to 100C


is required. The most preferable technique is to use hot air
soldering tools. Where a soldering iron is used, a temperature controlled model not exceeding 30 watts should be
used and set to not more than 260C. Maximum allowed
time at temperature is 1 minute. When hand soldering, the
base side (white side) must be soldered to the board.

COOLING
CIRCUIT BOARD TYPE

All flexible types of circuit boards may be used (e.g. FR-4,


G-10) and also alumina.
For other circuit board materials, please consult factory.

After soldering, the assembly should preferably be allowed to


cool naturally. In the event of assisted cooling, similar conditions to those recommended for preheating should be used.

CLEANING RECOMMENDATIONS
COMPONENT PAD DESIGN
Component pads must be designed to achieve good joints
and minimize component movement during soldering.
Pad designs are given below for both wave and reflow
soldering.
The basis of these designs is:
a. Pad width equal to component width. It is permissible
to decrease this to as low as 85% of component width
but it is not advisable to go below this.
b. Pad overlap about 0.3mm.
c. Pad extension about 0.3mm for reflow.
Pad extension about 0.8mm for wave soldering.

REFLOW SOLDERING

STORAGE CONDITIONS

DIMENSIONS: millimeters (inches)


0201
Accu-L

0402
Accu-L

0.26
(0.010)
0.78
(0.031)

0603
Accu-L

0.6
(0.024)
1.6
(0.063)

0.26
(0.010)
0.26
(0.010)

0.4
(0.015)

2.3
(0.091)

0805
Accu-L
0.7
(0.028)

0.90
(0.035)

0.50
(0.020)

Recommended storage conditions for Accu-L prior to use


are as follows:
Temperature. . . . . . . . . 15C to 35C
Humidity . . . . . . . . . . . 65%
Air Pressure . . . . . . . . . 860mbar to 1060mbar

2.8
1.4
(0.110) (0.055)

0.6
(0.024)
0.90
(0.035)

0.34
(0.013)

0.7
(0.028)

RECOMMENDED SOLDERING PROFILE

0.7
(0.028)

0.8
(0.031)

1.5
(0.059)

PREHEAT & SOLDERING


The rate of preheat in production should not exceed
4C/second. It is recommended not to exceed 2C/second.
Temperature differential from preheat to soldering should not
exceed 150C.
For further specific application or process advice, please
consult AVX.

40

Care should be taken to ensure that the devices are thoroughly cleaned of flux residues, especially the space beneath
the device. Such residues may otherwise become conductive and effectively offer a lossy bypass to the device. Various
recommended cleaning conditions (which must be optimized
for the flux system being used) are as follows:
Cleaning liquids . . . . . . i-propanol, ethanol, acetylacetone, water, and other standard
PCB cleaning liquids.
Ultrasonic conditions . . power 20w/liter max.
frequency 20kHz to 45kHz.
Temperature . . . . . . . . . 80C maximum (if not otherwise
limited by chosen solvent system).
Time. . . . . . . . . . . . . . . 5 minutes max.

For recommended soldering profile see page 29

Thin-Film RF/Microwave
Directional Couplers
CP0302/CP0402/CP0603/CP0805
and DB0603N/DB0805 3dB 90

41

Thin Film Directional Couplers


Wide Band High Directivity
CP0402W2700FNTR
ITF TECHNOLOGY
The ITF High Directivity Wide Band LGA Coupler is based on thinfilm multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged
construction for reliable automatic assembly.
The Wide Band High Directivity Coupler displays a stable coupling
factor over a wide frequency band.

APPLICATIONS

LAND GRID ARRAY


ADVANTAGES

Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LANs

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation

DIMENSIONS (Bottom View)


HOW TO ORDER
CP 0402

XXXX

TR

SubType

LGA
Termination
Sn100

Taped &
Reeled

mm (inches)
L
W

T
Type Frequency
Wide
(MHz)
Band

L
T

QUALITY INSPECTION
Finished parts are 100% tested for electrical
parameters and visual characteristics. Each
production lot is evaluated on a sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

B
S, H

1.000.05
(0.0400.002)
0.580.04
(0.0230.002)
0.350.05
(0.0140.002)
0.200.05
(0.0080.002)
0.180.05
(0.0070.002)
0.050.05
(0.0020.002)

TERMINALS (Top View)


Coupling

GND

TERMINATION
Nickel/Lead Free solder coating compatible with
automatic soldering technologies: reflow, wave
soldering, vapor phase and manual.

OPERATING TEMPERATURE

Recommended Pad Layout Dimensions

-40C to +85C

POWER RATING
3W RF Continuous

IN

Out

mm (inches)

0.31
(0.012)
0.20
(0.008)
0.15
(0.006)

0.53
(0.021)

42

Thin Film Directional Couplers


Wide Band High Directivity
CP0402W2700FNTR

P/N

Frequency
[MHz]

Coupling
[dB]

CP0402W2700FNTR

700-2,700

242

I. Loss
max.
[dB]
0.3

Return
Loss
[dB]
18

Directivity
[dB]

20

-10

-2

-20

-4

-30

-6

-40

-8

-50

-10

-60

-12
3,000

500

1,000

1,500

2,000

2,500

I Loss dB

Coupling R Loss Isolation dB

Directional Coupler Type CP0402W2700FNTR

Frequency MHz

43

Thin Film Directional Couplers


Wide Band High Directivity
CP0402W2700FNTR Test Jigs
GENERAL DESCRIPTION
These jigs are designed for testing the CP0402W2700FNTR
High Directivity Couplers using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.254mm (0.010") from the microstrips.
The substrate used is Neltecs NH9338ST0254C1BC.

The connectors are SMA type (female), Johnson Components


Inc. Product P/N: 142-0701-841.
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 SMA termination.

MEASUREMENT PROCEDURE
When measuring a component, it can be either soldered or
pressed using a non-metallic stick until all four ports touch
the appropriate pads. Set the VNA to the relevant frequency
band. Connect the VNA using a 10dB attenuator on the jig

terminal connected to port 2. Follow the VNAs instruction


manual and use the calibration jig to perform a full 2-Port
calibration in the required bandwidths.

Place the coupler on the measurement jig as follows:


GND (Coupler)
Connector 1 (Jig)
Coupling (Coupler) Connector 2 (Jig)

IN (Coupler) Connector 3 (Jig)


Out (Coupler) Connector 4 (Jig)

To measure I. Loss connect:


Connector 3 (Jig) Port 1 (VNA)
Connector 4 (Jig) Port 2 (VNA)

Connector 2 (Jig) 50

To measure R. Loss and Coupling connect:


Connector 3 (Jig) Port 1 (VNA)
Connector 2 (Jig) Port 2 (VNA)

Connector 4 (Jig) 50

To measure Isolation connect:


Connector 4 (Jig) Port 1 (VNA)
Connector 3 (Jig) 50

Connector 2 (Jig) Port 2 (VNA)

Measurement Jig
Connector 1
(not used)

Short Line
to GND.

OPEN

TH

TH

Open
Line

Connector 4

Connector 3

44

Connector
Johnson
P/N 142-0701-841

HS

Connector 2

HS

OPEN

Calibration Jig

Load &
Through

Load &
Through

Thin Film Directional Couplers


WiFi Band High Directivity
CP0302P5425ENTR / CP0302A5425ENTR / CP0402Q5425ENTR / CP0603Q5425ENTR
HIGH DIRECTIVITY DIRECTIONAL COUPLERS FOR WIFI BANDS
TECHNOLOGY

DIMENSIONS (Bottom View)

These High Directivity LGA Couplers are based on


thin-film multilayer technology. The technology
provides a miniature part with excellent high frequency
performance and rugged construction for reliable
automatic assembly. The WiFi Bands Couplers are
offered in 0302, 0402 and 0603 standard sizes having
identical electrical performance.

mm (inches)

L
T

APPLICATIONS:
WiFi

PART NUMBERS
CP0302P5425ENTR
CP0302A5425ENTR
CP0402Q5425ENTR
CP0603Q5425ENTR

L
W

QUALITY INSPECTION

Finished parts are 100% tested for electrical parameters and


visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance : 125C, IR, 4 hours

A
B
S, H

CP0302
0.650.04
(0.0260.002)
0.500.04
(0.020.002)
0.250.05
(0.010.002)
0.200.05
(0.0080.002)
0.100.04
(0.0040.002)
0.0250.025
(0.0010.001)

CP0402
1.00.05
(0.0400.002)
0.580.04
(0.0230.002)
0.350.05
(0.0140.002)
0.200.05
(0.0080.002)
0.180.05
(0.0070.002)
0.050.05
(0.0020.002)

CP0603
1.60.1
(0.0630.004)
0.840.1
(0.0330.004)
0.600.1
(0.0240.004)
0.250.05
(0.010.002)
0.200.05
(0.0080.002)
0.050.05
(0.0020.002)

TERMINATION
Nickel/Lead-Free Solder coating (Sn100) compatible with
automatic soldering technologies: reflow, wave soldering,
vapor phase and manual.

RECOMMENDED PAD LAYOUT


DIMENSTIONS
mm (inches)
0.30
(0.012)

OPERATING TEMPERATURE
-40C to +85C

TERMINALS (Top View)


OUT

50 OHM

IN

COUPLING

CP0302

OUT

OUT

50 OHM

IN

0.25
(0.01)

CP0302

COUPLING

CP0402

50 OHM

IN

0.20
(0.008)

0.20
(0.008)

CP0402 / CP0603: see pages 49 / 53

COUPLING

CP0603

45

Thin Film Directional Couplers


WiFi Band High Directivity
ELECTRICAL CHARACTERISTICS
P/N

CP0302P5425ENTR

P/N

CP0302A5425ENTR

P/N
CP0402Q5425ENTR
CP0603Q5425ENTR

Coupling
[dB]

I. Loss
max.
[dB]

Return
Loss
[dB]

Directivity
[dB]

2,400-2,496

-200.5

-0.2

-30

20

4,900-5,950

-130.5

-0.4

-25

20

Frequency
[MHz]

Coupling
[dB]

I. Loss
max.
[dB]

Return
Loss
[dB]

Directivity
[dB]

2,400-2,496

-201

-0.2

-30

20

4,900-5,950

-131

-0.4

-25

20

Frequency
[MHz]

Coupling
[dB]

I. Loss
max.
[dB]

Return
Loss
[dB]

Directivity
[dB]

2,400-2,496

-201

-0.3

-30

20

4,900-5,950

-131

-0.4

-25

20

-10

-1

-20

-2

-30

-3

-40

-4

-50

-5

-60

-6

-70

[GHz]

46

-7

I Loss dB

Coupling R Loss Isolation dB

Frequency
[MHz]

Thin Film Directional Coupler


CP0402P High Directivity, Tight Coupling Tolerance
GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY

DIMENSIONS:
(Bottom View)

The CP0402P Series High Directivity, Tight Coupling Tolerance LGA


Coupler is based on the proprietary RFAP Thin-Film multilayer technology.
The technology provides a miniature part with excellent high frequency
performance and ugged construction for reliable automatic assembly.
The ITF Coupler is offered in a variety of frequency bands compatible
with various types of high frequency wireless systems.

millimeters (inches)

B
A

APPLICATIONS

Wireless communications
Wireless LANs
GPS
WiMAX

LAND GRID ARRAY


ADVANTAGES

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation
Power Rating 3W RF Continuous

W
L
W
T

1.000.05
(0.0400.002)
0.580.04
(0.0230.002)
0.350.05
(0.0140.002)

A
B
S

0.200.05
(0.0080.002)
0.180.05
(0.0070.002)
0.050.05
(0.0020.002)

HOW TO ORDER
CP

0402

XXXX

TR

Style

Size

Type

Frequency

Sub-Type

Termination

Taped & Reeled

0402

0.5dB
Tight Tolerance

MHz

LGA
Lead-Free

TERMINALS (Top View)

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

LEAD-FREE COMPATIBLE
COMPONENT

50 OHM

OUT

COUPLING

IN

TERMINATION
Nickel/Lead-Free Solder coating compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.

Recommended Pad Layout Dimensions


0.31
(0.012)

OPERATING TEMPERATURE:
-40C to +85C

mm (inches)

0.20
(0.008)
0.15
(0.006)

0.53
(0.021)

47

Thin Film Directional Coupler


CP0402P High Directivity, Tight Coupling Tolerance
Coupler P/N CP0402PxxxxAN

PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-20

-24
R. Loss

-30

-36

-40

-48
Isolation

-50

-60

-60
0.8

1.6

Coupler P/N CP0402PxxxxBN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

CP0402P0836BN
CP0402P0881BN
CP0402P0902BN
CP0402P0947BN
CP0402P0897BN
CP0402P0942BN
CP0402P1441BN
CP0402P1747BN
CP0402P1842BN
CP0402P1880BN
CP0402P1960BN
CP0402P1907BN
CP0402P1890BN
CP0402P2442BN
CP0402P3500BN
CP0402P5000BN
CP0402P5500BN
CP0402P6000BN

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
22.000.5
0.20
28
869 - 894
21.700.5
0.20
28
890 - 915
21.500.5
0.20
28
935 - 960
21.000.5
0.25
27
880 - 915
21.500.5
0.20
28
925 - 960
21.000.5
0.25
27
1429 - 1453 17.500.5
0.25
24
27
1710 - 1785 16.000.5
0.30
23
1805 - 1880 15.500.5
0.35
23
1850 - 1910 15.500.5
0.35
23
1930 - 1990 15.000.5
0.35
22
1895 - 1920 15.500.5
0.35
23
1880 - 1900 15.500.5
0.35
23
2400 - 2484 13.300.5
0.40
21
3450 - 3550
9.400.5
0.80
18
14
4950 - 5050
7.400.5
1.20
14
13
5450 - 5550
6.700.5
1.60
14
13
5950 - 6050
6.100.5
2.00
14
13

Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

48

P/N
Examples
CP0402P0836EN
CP0402P0881EN
CP0402P0902EN
CP0402P0947EN
CP0402P0897EN
CP0402P0942EN
CP0402P1441EN
CP0402P1747EN
CP0402P1842EN
CP0402P1880EN
CP0402P1960EN
CP0402P1907EN
CP0402P1890EN
CP0402P2442EN
CP0402P3500EN
CP0402P5000EN
CP0402P5500EN
CP0402P6000EN

4.8

5.6

6.4

-72

I. Loss

-4

-10
Coupling

-20

-8

-30 R. Loss

-12

-40

-16

-50 Isolation

-20

-60
0.8

1.6

2.4

3.2

4.8

5.6

-24
6.4

Frequency [GHz]

CP0402PxxxxENTR

Coupler P/N CP0402PxxxxEN


Frequency Coupling I. Loss Return Directivity
Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
27.200.5
0.20
35
869 - 894
26.800.5
0.20
34
890 - 915
26.500.5
0.20
34
935 - 960
26.000.5
0.20
34
25
880 - 915
26.500.5
0.20
34
925 - 960
26.000.5
0.20
34
1429 - 1453 22.300.5
0.25
29
1710 - 1785 20.500.5
0.25
27
1805 - 1880 20.300.5
0.25
26
1850 - 1910 20.000.5
0.25
26
1930 - 1990 20.000.5
0.25
26
23
1895 - 1920 20.000.5
0.25
26
1880 - 1900 20.000.5
0.25
26
2400 - 2484 18.000.5
0.35
23
3450 - 3550 15.000.5
0.37
20
16
4950 - 5050 12.500.5
0.50
18
13
5450 - 5550 11.500.5
0.65
16
13
5950 - 6050 11.100.5
0.70
15
13

3.2

CP0402PxxxxBNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

P/N
Examples

2.4

Frequency [GHz]

0
I. Loss

Coupling, Return Loss,


Isolation, [dB]

-12

Coupling

I Loss [dB]

E-GSM

-10

I. Loss

I Loss [dB]

GSM

CP0402P0836AN
CP0402P0881AN
CP0402P0902AN
CP0402P0947AN
CP0402P0897AN
CP0402P0942AN
CP0402P1441AN
CP0402P1747AN
CP0402P1842AN
CP0402P1880AN
CP0402P1960AN
CP0402P1907AN
CP0402P1890AN
CP0402P2442AN
CP0402P3500AN
CP0402P5000AN
CP0402P5500AN
CP0402P6000AN

CP0402PxxxxANTR
0

-10

-2

-20 Coupling

-4

-30

-6

-40

R. Loss

-8

-50

-10
Isolation

-60
0.8

1.6

2.4

3.2

Frequency [GHz]

4.8

5.6

-12
6.4

I Loss [dB]

AMPS

P/N
Examples*

Coupling I. Loss Return Directivity


[dB]
max. Loss
[dB]
[dB]
[dB]
19.100.5
0.25
32
18.600.5
0.25
31
18.500.5
0.25
31
18.000.5
0.25
31
18.500.5
0.25
31
18.000.5
0.25
31
14.500.5
0.40
28
21
13.000.5
0.50
26
12.500.5
0.50
26
12.300.5
0.50
25
12.000.5
0.50
25
12.300.5
0.50
25
12.300.5
0.50
25
10.300.5
0.70
23
7.600.5
1.30
15
14
5.000.5
1.50
15
13
4.600.5
1.50
14
13
4.000.5
1.50
14
13

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency
Band
[MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484
3450 - 3550
4950 - 5050
5450 - 5550
5950 - 6050

Thin-Film Directional Couplers


CP0402 High Directivity LGA Termination
GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY

DIMENSIONS:
(Bottom View)

The ITF High Directivity LGA Coupler is based on thin-film multilayer


technology. The technology provides a miniature part with excellent high
frequency performance and rugged construction for reliable automatic
assembly.
The ITF Coupler is offered in a variety of frequency bands compatible
with various types of high frequency wireless systems.

millimeters (inches)

B
A

APPLICATIONS

FEATURES

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation
Operating/Storage Temp
-40C to +85C
Power Rating 3W RF Cont

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs

W
L
W
T

1.000.05
(0.0400.002)
0.580.04
(0.0230.002)
0.350.05
(0.0140.002)

A
B
S

0.200.05
(0.0080.002)
0.180.05
(0.0070.002)
0.050.05
(0.0020.002)

HOW TO ORDER
CP

0402

****

TR

Style

Size

Type

Frequency

Sub Type

0402

LGA
Termination

Packaging Code

Directional Coupler

(MHz)

TR = Tape and Reel

L = LGA Sn90, Pb10


**N = LGA Sn100

**RoHS compliant

QUALITY INSPECTION

TERMINALS (Top View)

Finished parts are 100% tested for electrical parameters and


visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

TERMINATION

50 OHM

OUT

LEAD-FREE COMPATIBLE
COMPONENT

COUPLING

IN

Sn90Pb10 or Lead-Free Sn100 Nickel/Solder coating


compatible with automatic soldering technologies: reflow,
wave soldering, vapor phase and manual.

ORIENTATION IN TAPE

Not RoHS Compliant

For RoHS compliant products,


please select correct termination style.

Recommended Pad Layout Dimensions

mm (inches)

0.31
(0.012)
0.20
(0.008)

OUT

IN

50
OHM

CP

OUT

IN

50
OHM

0.15
(0.006)

CP
0.53
(0.021)
*The recommended distance to the PCB Ground Plane is 0.254mm (0.010")

49

Thin-Film Directional Couplers


CP0402 High Directivity LGA Termination
CP0402 - TYPE SELECTION CHART

Coupling vs. Frequency


0
CP0402Axxxx AN

-5

Coupling [dB]

CP0402Axxxx BN
CP0402Axxxx CN

-10

CP0402Axxxx DN

-15

CP0402Axxxx FN

CP0402Axxxx EN

-20

-25

-30

-35

-40

0.5

1.5

2.5

3.5

4.5

5.5

Frequency [GHz]

Intermediate coupling factors are readily available.


Please contact factory.

50

Thin-Film Directional Couplers


CP0402 High Directivity LGA Termination
Coupler P/N CP0402AxxxxAN

PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-12

Coupling

-20

-24
R. Loss

-30

-36

-40

-48
Isolation

-50

-60

-60
0.8

1.6

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

CP0402A0836BN
CP0402A0881BN
CP0402A0902BN
CP0402A0947BN
CP0402A0897BN
CP0402A0942BN
CP0402A1441BN
CP0402A1747BN
CP0402A1842BN
CP0402A1880BN
CP0402A1960BN
CP0402A1907BN
CP0402A1890BN
CP0402A2442BN
CP0402A3500BN
CP0402A5000BN
CP0402A5500BN
CP0402A6000BN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples
CP0402A0836CN
CP0402A0881CN
CP0402A0902CN
CP0402A0947CN
CP0402A0897CN
CP0402A0942CN
CP0402A1441CN
CP0402A1747CN
CP0402A1842CN
CP0402A1880CN
CP0402A1960CN
CP0402A1907CN
CP0402A1890CN
CP0402A2442CN
CP0402A3500CN
CP0402A5000CN
CP0402A5500CN
CP0402A6000CN

4.8

5.6

6.4

-72

0
I. Loss

-4

-10
Coupling

-8

-20
-30

-12

R. Loss

-40

-16

7.318"

-50

-20

Isolation

-60
0.8

1.6

2.4

3.2

4.8

5.6

6.4

-24

Frequency [GHz]

CP0402AxxxxCNTR
0

0
I. Loss

-10

Coupling, Return Loss,


Isolation, [dB]

Application

CP0402AxxxxBNTR

Coupler P/N CP0402AxxxxCN


Frequency Coupling I. Loss Return Directivity
Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
23.60
0.20
33
869 - 894
23.00
0.20
33
890 - 915
23.00
0.20
26
935 - 960
22.50
0.20
33
22
880 915
23.00
0.20
25
925 960
22.50
0.20
32
1429 - 1453
19.00
0.25
31
1710 - 1785
17.20
0.25
30
1805 - 1880
17.00
0.25
30
1850 - 1910
16.80
0.25
30
19
1930 - 1990
16.50
0.25
29
1895 - 1920
16.80
0.25
29
1880 - 1900
16.80
0.25
30
2400 - 2484
14.70
0.45
28
3450 - 3550
10.97
0.67
23
17
4950 - 5050
8.00
1.00
21
16
5450 - 5550
7.50
1.10
21
15
5950 - 6050
7.10
1.30
23
15

3.2

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
22.00
0.20
28
869 - 894
21.70
0.20
28
890 - 915
21.50
0.20
28
935 - 960
21.00
0.25
27
880 915
21.50
0.20
28
925 960
21.00
0.25
27
1429 - 1453
17.50
0.25
24
27
1710 - 1785
16.00
0.30
23
1805 - 1880
15.50
0.35
23
1850 - 1910
15.50
0.35
23
1930 - 1990
15.00
0.35
22
1895 - 1920
15.50
0.35
23
1880 - 1900
15.50
0.35
23
2400 - 2484
13.30
0.40
21
3450 - 3550
9.40
0.80
18
14
4950 - 5050
7.40
1.20
14
13
5450 - 5550
6.70
1.60
14
13
5950 - 6050
6.10
2.00
14
13

2.4

Frequency [GHz]

Coupler P/N CP0402AxxxxBN


P/N
Examples

I Loss [dB]

E-GSM

-10

I Loss [dB]

GSM

CP0402A0836AN
CP0402A0881AN
CP0402A0902AN
CP0402A0947AN
CP0402A0897AN
CP0402A0942AN
CP0402A1441AN
CP0402A1747AN
CP0402A1842AN
CP0402A1880AN
CP0402A1960AN
CP0402A1907AN
CP0402A1890AN
CP0402A2442AN
CP0402A3500AN
CP0402A5000AN
CP0402A5500AN
CP0402A6000AN

I. Loss

-4
Coupling

-20
-30

-8
R. Loss

-12

-40

I Loss [dB]

AMPS

P/N
Examples*

CP0402AxxxxANTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
19.10
0.25
32
869 - 894
18.60
0.25
31
890 - 915
18.50
0.25
31
935 - 960
18.00
0.25
31
880 915
18.50
0.25
31
925 960
18.00
0.25
31
1429 - 1453
14.50
0.40
28
21
1710 - 1785
13.00
0.50
26
1805 - 1880
12.50
0.50
26
1850 - 1910
12.30
0.50
25
1930 - 1990
12.00
0.50
25
1895 - 1920
12.30
0.50
25
1880 - 1900
12.30
0.50
25
2400 - 2484
10.30
0.70
23
3450 - 3550
7.60
1.30
15
14
4950 - 5050
5.00
1.50
15
13
5450 - 5550
4.60
1.50
14
13
5950 - 6050
4.00
1.50
14
13

-16

-50

-20
Isolation

-60
0.8

1.6

2.4

3.2

4.8

5.6

6.4

-24

Frequency [GHz]

Important: Couplers can be used at any frequency within the indicated range.

51

Thin-Film Directional Couplers


CP0402 High Directivity LGA Termination
Coupler P/N CP0402AxxxxDN

E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-2
Coupling

-20

-4

-30 R. Loss

-6

-40

-8

-50

-10
Isolation

-60
0.8

1.6

Coupler P/N CP0402AxxxxEN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

CP0402A0836EN
CP0402A0881EN
CP0402A0902EN
CP0402A0947EN
CP0402A0897EN
CP0402A0942EN
CP0402A1441EN
CP0402A1747EN
CP0402A1842EN
CP0402A1880EN
CP0402A1960EN
CP0402A1907EN
CP0402A1890EN
CP0402A2442EN
CP0402A3500EN
CP0402A5000EN
CP0402A5500EN
CP0402A6000EN

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
27.20
0.20
35
869 - 894
26.80
0.20
34
890 - 915
26.50
0.20
34
935 - 960
26.00
0.20
34
25
880 915
26.50
0.20
34
925 960
26.00
0.20
34
1429 - 1453
22.30
0.25
29
1710 - 1785
20.50
0.25
27
1805 - 1880
20.30
0.25
26
1850 - 1910
20.00
0.25
26
23
1930 - 1990
20.00
0.25
26
1895 - 1920
20.00
0.25
26
1880 - 1900
20.00
0.25
26
2400 - 2484
18.00
0.35
23
3450 - 3550
15.00
0.37
20
16
4950 - 5050
12.50
0.50
18
13
5450 - 5550
11.50
0.65
16
13
5950 - 6050
11.10
0.70
15
13

3.2

4.8

5.6

6.4

-12

CP0402AxxxxENTR
0

0
I. Loss

Coupling, Return Loss,


Isolation, [dB]

Application

P/N
Examples

2.4

Frequency [GHz]

-10

-2

-20 Coupling

-4

-30

-6

-40

R. Loss

-8

-50

-10
Isolation

-60
0.8

1.6

2.4

3.2

4.8

5.6

-12
6.4

Frequency [GHz]

Coupler P/N CP0402AxxxxFN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples
CP0402A0836FN
CP0402A0881FN
CP0402A0902FN
CP0402A0947FN
CP0402A0897FN
CP0402A0942FN
CP0402A1441FN
CP0402A1747FN
CP.0402A1842FN
CP0402A1880FN
CP0402A1960FN
CP0402A1907FN
CP0402A1890FN
CP0402A2442FN
CP0402A3500FN
CP0402A5000FN
CP0402A5500FN
CP0402A6000FN

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
31.00
0.20
29.10
869 - 894
30.70
0.20
28.60
890 - 915
30.60
0.20
28.50
935 - 960
30.00
0.20
28.10
880 915
30.60
0.20
28.50
925 960
30.00
0.20
28.10
1429 - 1453
26.50
0.20
25.00
11
1710 - 1785
25.00
0.20
23.80
1805 - 1880
24.50
0.20
23.60
1850 - 1910
24.20
0.20
23.50
1930 - 1990
24.00
0.20
23.30
1895 - 1920
24.20
0.20
23.40
1880 - 1900
24.20
0.20
23.50
2400 - 2484
22.00
0.25
22.60
3450 - 3550
18.00
0.27
22.00
9
4950 - 5050
15.70
0.30
23.01
8
5450 - 5550
15.20
0.30
20.36
7.5
5950 - 6050
14.50
0.30
18.94
7.5

Important: Couplers can be used at any frequency within the indicated range.

52

CP0402AxxxxFNTR
0

0
I. Loss

-1

-10

-2

-20
R. Loss

-3

-30
Coupling

-4

-40
Isolation

-5

-50
-60
0.8

1.6

2.4

3.2

4.8

5.6

6.4

-6

I Loss [dB]

Application

Coupling, Return Loss,


Isolation, [dB]

-10

I Loss [dB]

GSM

CP0402A0836DN
CP0402A0881DN
CP0402A0902DN
CP0402A0947DN
CP0402A0897DN
CP0402A0942DN
CP0402A1441DN
CP0402A1747DN
CP0402A1842DN
CP0402A1880DN
CP0402A1960DN
CP0402A1907DN
CP0402A1890DN
CP0402A2442DN
CP0402A3500DN
CP0402A5000DN
CP0402A5500DN
CP0402A6000DN

0
I. Loss

I Loss [dB]

AMPS

P/N
Examples*

CP0402AxxxxDNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
25.20
0.20
29
869 - 894
24.80
0.20
28
890 - 915
24.70
0.20
28
935 - 960
24.10
0.20
28
20
880 915
24.70
0.20
28
925 960
24.10
0.20
28
1429 - 1453
20.50
0.20
25
1710 - 1785
19.00
0.20
24
1805 - 1880
18.50
0.25
23
1850 - 1910
18.20
0.25
23
18
1930 - 1990
18.00
0.25
23
1895 - 1920
18.10
0.25
23
1880 - 1900
18.20
0.25
23
2400 - 2484
16.00
0.35
22
3450 - 3550
12.50
0.46
21
17
4950 - 5050
10.00
0.65
21
16
5450 - 5550
9.60
0.76
20
15
5950 - 6050
9.10
0.84
20
15

Thin-Film Directional Couplers


CP0603 High Directivity LGA Termination
GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY

DIMENSIONS:
(Bottom View)

The ITF LGA Coupler is based on thin-film multilayer technology.


The technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Coupler is offered in a variety of frequency bands compatible
with various types of high frequency wireless systems.

APPLICATIONS

FEATURES

B
A

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation
Operating/Storage Temp
-40C to +85C
Power Rating 3W RF Cont

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs

millimeters (inches)

T
W
1.600.10
(0.0630.004)
0.840.10
(0.0330.004)
0.600.10
(0.0240.004)

L
W
T

0.250.05
(0.0100.002)
0.200.05
(0.0080.002)
0.050.05
(0.0020.002)

A
B
S

HOW TO ORDER
CP

0603

****

TR

Style

Size

Sub Type

Termination
Code

Packaging Code

0603

Type

Frequency

Directional Coupler

(MHz)

TR = Tape and Reel

L = LGA Sn90, Pb10


**N = LGA Sn100

**RoHS compliant

QUALITY INSPECTION

TERMINALS (Top View)

Finished parts are 100% tested for electrical parameters and


visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

OUT

Not RoHS Compliant

50 OHM
LEAD-FREE COMPATIBLE
COMPONENT

TERMINATION
Sn90Pb10 or Lead-Free Sn100 Nickel/Solder coating
compatible with automatic soldering technologies: reflow,
wave soldering, vapor phase and manual.

ORIENTATION IN TAPE

OUT

50
OHM

OUT

IN

COUPLING
For RoHS compliant products,
please select correct termination style.

Recommended Pad Layout Dimensions

mm (inches)

1.10
(0.043)

50
OHM

0.40
(0.016)

IN

CP

IN

CP
0.50
(0.020)
1.75 (0.069)
*The recommended distance to the PCB Ground Plane is 0.254mm (0.010")

53

Thin-Film Directional Couplers


CP0603 High Directivity LGA Termination
CP0603 - TYPE SELECTION CHART
Coupling vs. Frequency
0
CP0603Axxxx CN
CP0603Axxxx HN
CP0603Axxxx KN
CP0603Axxxx AN
CP0603Axxxx DN
CP0603Axxxx BN
CP0603Axxxx MN
CP0603Axxxx EN
CP0603Axxxx LN

-5

-10

CP0603Axxxx FN

-15

CP0603Axxxx GN

dB

-20

-25

-30

-35

-40

0.5

1.5

2.5

3.5

4.5

5.5

Frequency [GHz]

Intermediate coupling factors are readily available.


Please contact factory.

54

Thin-Film Directional Couplers


CP0603 High Directivity LGA Type
Coupler P/N CP0603AxxxxAN

PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-10

-8
Coupling

-20
-30

-16
R. Loss

-24

-40
-50

-32
-40

Isolation

-60
0.8

1.6

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples*
CP0603A0836BN
CP0603A0881BN
CP0603A0902BN
CP0603A0947BN
CP0603A0897BN
CP0603A0942BN
CP0603A1441BN
CP0603A1747BN
CP0603A1842BN
CP0603A1880BN
CP0603A1960BN
CP0603A1907BN
CP0603A1890BN
CP0603A2442BN
CP0603A3500BN
CP0603A5000BN
CP0603A5500BN
CP0603A6000BN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples*
CP0603A0836CN
CP0603A0881CN
CP0603A0902CN
CP0603A0947CN
CP0603A0897CN
CP0603A0942CN
CP0603A1441CN
CP0603A1747CN
CP0603A1842CN
CP0603A1880CN
CP0603A1960CN
CP0603A1907CN
CP0603A1890CN
CP0603A2442CN
CP0603A3500CN
CP0603A5000CN
CP0603A5500CN
CP0603A6000CN

4.8

5.6

6.4

-48

-2

-10
Coupling

-4

-20

-6

-30
R. Loss

-8

-40

-50

Isolation

0.8

1.6

2.4

3.2

4.0

4.8

5.6

6.4

-10

Frequency [GHz]

CP0603AxxxxCNTR
0
-10

Coupling, Return Loss,


Isolation, [dB]

Application

I. Loss

Coupler P/N CP0603AxxxxCN


Frequency Coupling I. Loss Return Directivity
Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
15.2
0.35
23
869 - 894
15.0
0.35
23
890 - 915
14.7
0.35
23
935 - 960
14.3
0.40
22
23
880 - 915
14.7
0.35
23
925 - 960
14.3
0.40
22
1429 - 1453
11.0
0.70
19
1710 - 1785
9.5
0.80
18
1805 - 1880
9.0
0.90
17
1850 - 1910
8.8
0.90
17
1930 - 1990
8.5
1.00
17
21
1895 - 1920
8.8
0.90
17
1880 - 1900
8.8
0.90
17
2400 - 2484
7.0
1.40
15
3450 - 3550
4.8
2.0
23
20
4950 - 5050
3.0
3.6
21
17
5450 - 5550
3.0
4.0
20.6
16
5950 - 6050
2.5
4.5
20.5
16

3.2

CP0603AxxxxBNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

2.4

Frequency [GHz]

Coupler P/N CP0603AxxxxBN


Frequency Coupling I. Loss Return Directivity
Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
23.0
0.20
31
869 - 894
22.7
0.20
31
890 - 915
22.5
0.20
31
935 - 960
22.0
0.20
30
24
880 - 915
22.5
0.20
31
925 - 960
22.0
0.20
30
1429 - 1453
18.5
0.25
27
1710 - 1785
17.0
0.25
25
1805 - 1880
16.4
0.25
25
1850 - 1910
16.2
0.25
25
1930 - 1990
16.0
0.25
24
21
1895 - 1920
16.1
0.25
25
1880 - 1900
16.2
0.25
25
2400 - 2484
14.2
0.35
23
3450 - 3550
11.2
0.6
20
20
4950 - 5050
8.4
1.1
16.7
17
5450 - 5550
7.8
1.4
15.7
16
5950 - 6050
7.2
1.6
15
15

I Loss [dB]

E-GSM

I Loss [dB]

GSM

CP0603A0836AN
CP0603A0881AN
CP0603A0902AN
CP0603A0947AN
CP0603A0897AN
CP0603A0942AN
CP0603A1441AN
CP0603A1747AN
CP0603A1842AN
CP0603A1880AN
CP0603A1960AN
CP0603A1907AN
CP0603A1890AN
CP0603A2442AN
CP0603A3500AN
CP0603A5000AN
CP0603A5500AN
CP0603A6000AN

CP0603AxxxxANTR
I. Loss

I. Loss
Coupling

-20

-20

-40
R. Loss

-30

-60

-40

-80

I Loss [dB]

AMPS

P/N
Examples*

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
20.0
0.25
28
869 - 894
19.7
0.25
28
890 - 915
19.4
0.25
27
935 - 960
19.0
0.25
27
880 - 915
19.4
0.25
28
925 - 960
19.0
0.25
27
1429 - 1453
15.5
0.40
24
22
1710 - 1785
14.0
0.50
22
1805 - 1880
13.5
0.50
22
1850 - 1910
13.2
0.50
22
1930 - 1990
13.0
0.55
21
1895 - 1920
13.2
0.50
22
1880 - 1900
13.2
0.50
22
2400 - 2484
11.5
0.75
20
3450 - 3550
8.6
1.3
17
20
4950 - 5050
6.1
2.2
13
14
5450 - 5550
5.5
2.5
15
13
5950 - 6050
5
3
11.6
13

Isolation

-50
-60
0.8

-100

1.6

2.4

3.2

4.8

5.6

6.4

-120

Frequency [GHz]

Important: Couplers can be used at any frequency within the indicated range.

55

Thin-Film Directional Couplers


CP0603 High Directivity LGA Type
Coupler P/N CP0603AxxxxDN

PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-8

-20
-30

-12

R. Loss

-16

-40
-50

-20

Isolation

-60
0.8

1.6

Coupler P/N CP603AxxxxEN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples*
CP0603A0836EN
CP0603A0881EN
CP0603A0902EN
CP0603A0947EN
CP0603A0897EN
CP0603A0942EN
CP0603A1441EN
CP0603A1747EN
CP0603A1842EN
CP0603A1880EN
CP0603A1960EN
CP0603A1907EN
CP0603A1890EN
CP0603A2442EN
CP0603A3500EN
CP0603A5000EN
CP0603A5500EN
CP0603A6000EN

Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

CP0603A0836FN
CP0603A0881FN
CP0603A0902FN
CP0603A0947FN
CP0603A0897FN
CP0603A0942FN
CP0603A1441FN
CP0603A1747FN
CP0603A1842FN
CP0603A1880FN
CP0603A1960FN
CP0603A1907FN
CP0603A1890FN
CP0603A2442FN
CP0603A3500FN
CP0603A5000FN
CP0603A5500FN
CP0603A6000FN

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
31.2
0.20
32
869 - 894
30.8
0.20
32
890 - 915
30.5
0.20
30
935 - 960
30.2
0.20
30
880 - 915
30.5
0.20
30
925 - 960
30.2
0.20
30
1429 - 1453
27.0
0.25
28
12
1710 - 1785
25.0
0.25
27
1805 - 1880
26.5
0.25
27
1850 - 1910
24.3
0.25
27
1930 - 1990
24.0
0.25
28
1895 - 1920
24.2
0.25
27
1880 - 1900
24.2
0.25
27
2400 - 2484
21.5
0.25
25
3450 - 3550
17.8
0.33
20.0
13
4950 - 5050
15.4
0.62
14.86
12
5450 - 5550
14.8
0.86
13.58
12
5950 - 6050
14.3
1.02
12.58
11

Important: Couplers can be used at any frequency within the indicated range.

56

4.8

5.6

6.4

-24

CP0603AxxxxENTR
0
I. Loss

-10
-20

-4
Coupling

-8

-30

-12
R. Loss

-40
-50

-16
-20

Isolation

-60
0.8

1.6

2.4

3.2

4.8

5.6

6.4

-24

Frequency [GHz]

Coupler P/N CP603AxxxxFN


P/N
Examples*

3.2

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
25.8
0.20
32
869 - 894
25.3
0.20
32
890 - 915
25.0
0.20
32
935 - 960
24.7
0.20
31
880 - 915
26.0
0.20
32
925 - 960
24.7
0.20
31
1429 - 1453
22.0
0.25
28
21
1710 - 1785
19.5
0.30
26
1805 - 1880
19.0
0.30
26
1850 - 1910
18.8
0.30
26
1930 - 1990
18.5
0.30
26
1895 - 1920
18.7
0.30
26
1880 - 1900
18.8
0.30
26
2400 - 2484
17.0
0.40
24
3450 - 3550
13.2
0.5
18
20
4950 - 5050
10.7
0.9
13
16
5450 - 5550
10.2
1.2
12
15
5950 - 6050
9.7
1.4
12
14

2.4

Frequency [GHz]

CP0603AxxxxFNTR
0

0
I. Loss

-10

Coupling, Return Loss,


Isolation, [dB]

Coupling

I Loss [dB]

E-GSM

-4

-10

I Loss [dB]

GSM

CP0603A0836DN
CP0603A0881DN
CP0603A0902DN
CP0603A0947DN
CP0603A0897DN
CP0603A0942DN
CP0603A1441DN
CP0603A1747DN
CP0603A1842DN
CP0603A1880DN
CP0603A1960DN
CP0603A1907DN
CP0603A1890DN
CP0603A2442DN
CP0603A3500DN
CP0603A5000DN
CP0603A5500DN
CP0603A6000DN

I. Loss

-4

-20

-8
Coupling

-30

-12
R. Loss

-40

-16
Isolation

-50
-60
0.8

-20

1.6

2.4

3.2

Frequency [GHz]

4.8

5.6

6.4

-24

I Loss [dB]

AMPS

P/N
Examples*

CP0603AxxxxDNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
22.0
0.25
31
869 - 894
21.8
0.25
30
890 - 915
21.3
0.25
30
935 - 960
21.0
0.30
30
30
880 - 915
21.3
0.25
30
925 - 960
21.0
0.30
30
1429 - 1453
17.7
0.40
27
1710 - 1785
16.0
0.40
25
1805 - 1880
15.4
0.40
25
1850 - 1910
15.2
0.40
24
1930 - 1990
15.0
0.40
24
25
1895 - 1920
15.2
0.40
24
1880 - 1900
15.2
0.40
24
2400 - 2484
13.3
0.55
22
3450 - 3550
10.1
0.66
25.3
20
4950 - 5050
7.8
1.17
21.1
18
5450 - 5550
6.8
1.39
19.9
18
5950 - 6050
6.3
1.64
18.8
17

Thin-Film Directional Couplers


CP0603 High Directivity LGA Type
Coupler P/N CP603AxxxxGN

PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-4

-20

-8
R. Loss

-30

-12
Coupling

-40
-50

-16
-20

Isolation

-60
0.8

1.6

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples*
CP0603A0836HN
CP0603A0881HN
CP0603A0902HN
CP0603A0947HN
CP0603A0897HN
CP0603A0942HN
CP0603A1441HN
CP0603A1747HN
CP0603A1842HN
CP0603A1880HN
CP0603A1960HN
CP0603A1907HN
CP0603A1890HN
CP0603A2442HN
CP0603A3500HN
CP0603A5000HN
CP0603A5500HN
CP0603A6000HN

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

CP0603A0836MN
CP0603A0881MN
CP0603A0902MN
CP0603A0947MN
CP0603A0897MN
CP0603A0942MN
CP0603A1441MN
CP0603A1747MN
CP0603A1842MN
CP0603A1880MN
CP0603A1960MN
CP0603A1907MN
CP0603A1890MN
CP0603A2442MN
CP0603A3500MN
CP0603A5000MN
CP0603A5500MN
CP0603A6000MN

4.8

5.6

6.4

-24

CP0603AxxxxHNTR

-10

-20

-30

-10

Coupling

-20

R. Loss

-30

-40

-40
Isolation

-50
0.8

1.6

2.4

3.2

4.8

5.6

6.4

-50

Frequency [GHz]

CP0603AxxxxMNTR
0

0
I. Loss

-10

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
24.2
0.20
33
869 - 894
23.8
0.20
32
890 - 915
23.4
0.20
32
935 - 960
23.2
0.20
32
23
880 - 915
23.4
0.20
32
925 - 960
23.2
0.20
32
1429 - 1453
20.0
0.25
28
1710 - 1785
18.4
0.25
27
1805 - 1880
18.0
0.25
26
1850 - 1910
17.8
0.25
26
1930 - 1990
17.5
0.25
26
20
1895 - 1920
17.7
0.25
26
1880 - 1900
17.8
0.25
26
2400 - 2484
15.6
0.35
24
3450 - 3550
12.8
0.58
18
20
4950 - 5050
10.2
1.0
15
16
5450 - 5550
9.7
1.2
15
14
5950 - 6050
8.9
1.5
13.5
9

I. Loss

Coupler P/N CP603AxxxxMN


P/N
Examples*

3.2

Coupling, Return Loss,


Isolation, [dB]

Application

2.4

Frequency [GHz]

Coupler P/N CP603AxxxxHN


Frequency Coupling I. Loss Return Directivity
Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
17.3
0.30
26
869 - 894
17.0
0.30
25
890 - 915
16.7
0.30
25
935 - 960
16.3
0.35
25
26
880 - 915
17.0
0.35
25
925 - 960
16.3
0.35
25
1429 - 1453
13.0
0.55
22
1710 - 1785
11.4
0.75
20
1805 - 1880
11.0
0.75
20
1850 - 1910
10.8
0.75
19
1930 - 1990
10.5
0.75
19
24
1895 - 1920
10.7
0.75
19
1880 - 1900
10.8
0.75
19
2400 - 2484
8.8
1.00
17
3450 - 3550
5.9
1.48
25
21
4950 - 5050
4.4
2.59
22
18
5450 - 5550
4
2.95
22
17
5950 - 6050
3.5
3.37
21
17

I Loss [dB]

E-GSM

-10

I Loss [dB]

GSM

CP0603A0836GN
CP0603A0881GN
CP0603A0902GN
CP0603A0947GN
CP0603A0897GN
CP0603A0942GN
CP0603A1441GN
CP0603A1747GN
CP0603A1842GN
CP0603A1880GN
CP0603A1960GN
CP0603A1907GN
CP0603A1890GN
CP0603A2442GN
CP0603A3500GN
CP0603A5000GN
CP0603A5500GN
CP0603A6000GN

0
I. Loss

-20

-2
Coupling

-4

-30

-6
R. Loss

-40
-50

-8
-10

Isolation

-60
0.8

I Loss [dB]

AMPS

P/N
Examples*

CP0603AxxxxGNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
34.2
0.20
30
869 - 894
33.8
0.20
30
890 - 915
33.6
0.20
30
935 - 960
33.2
0.20
29
880 - 915
33.6
0.20
30
925 - 960
33.2
0.20
29
1429 - 1453
30.0
0.25
25
13
1710 - 1785
28.5
0.25
24
1805 - 1880
28.0
0.25
24
1850 - 1910
27.7
0.25
24
1930 - 1990
27.5
0.25
23
1895 - 1920
27.6
0.25
24
1880 - 1900
27.7
0.25
24
2400 - 2484
25.5
0.25
22
3450 - 3550
21.6
0.31
20
13
4950 - 5050
19
0.39
16
12
5450 - 5550
18.5
0.57
15
12
5950 - 6050
18.0
0.74
14
11

1.6

2.4

3.2

4.8

5.6

6.4

-12

Frequency [GHz]

Important: Couplers can be used at any frequency within the indicated range.

57

Thin-Film Directional Couplers


CP0603 High Directivity LGA Type
Coupler P/N CP603AxxxxLN

E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

-20

-8

Coupling

-12

-30
R. Loss

-16

-40
-50

Isolation

-60
0.8

-20

1.6

Coupler P/N CP603AxxxxKN


Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN
WiFi

P/N
Examples*
CP0603A0836KN
CP0603A0881KN
CP0603A0902KN
CP0603A0947KN
CP0603A0897KN
CP0603A0942KN
CP0603A1441KN
CP0603A1747KN
CP0603A1842KN
CP0603A1880KN
CP0603A1960KN
CP0603A1907KN
CP0603A1890KN
CP0603A2442KN
CP0603A3500KN
CP0603A5000KN
CP0603A5500KN
CP0603A6000KN

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
18.5
0.14
30
869 - 894
18.1
0.14
29
26
890 - 915
17.6
0.15
29
935 - 960
17.3
0.15
29
880 - 915
17.9
0.147
29
25
925 - 960
17.6
0.15
29
1429 - 1453
14
0.27
25
1710 - 1785
12.4
0.36
23
1805 - 1880
12
0.39
22.5
1850 - 1910
11.8
0.4
22
24
1930 - 1990
11.4
0.44
22
1895 - 1920
11.5
0.43
22
1880 - 1900
11.7
0.41
22
2400 - 2484
9.7
0.6
19
23
3450 - 3550
7.2
1.15
15
19
4950 - 5050
4.7
2.15
15
5450 - 5550
4.2
2.5
17
13
5950 - 6050
3.7
2.8
19

Important: Couplers can be used at any frequency within the indicated range.

58

2.4

3.2

4.8

5.6

6.4

-24

Frequency [GHz]

CP0603AxxxxKNTR
0

I. Loss

-10

Coupling, Return Loss,


Isolation, [dB]

-4

-10

I Loss [dB]

GSM

CP0603A0836LN
CP0603A0881LN
CP0603A0902LN
CP0603A0947LN
CP0603A0897LN
CP0603A0942LN
CP0603A1441LN
CP0603A1747LN
CP0603A1842LN
CP0603A1880LN
CP0603A1960LN
CP0603A1907LN
CP0603A1890LN
CP0603A2442LN
CP0603A3500LN
CP0603A5000LN
CP0603A5500LN
CP0603A6000LN

I. Loss

-20

-30

-12

-24

Coupling

-36

R. Loss

-40

-48
Isolation

-50
0.8

1.6

2.4

3.2

Frequency [GHz]

4.8

5.6

6.4

-60

I Loss [dB]

AMPS

P/N
Examples*

CP0603AxxxxLNTR
0

Coupling, Return Loss,


Isolation, [dB]

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
26.89
0.08
32.5
869 - 894
26.55
0.08
32.2
890 - 915
26.2
0.09
31.9
18
935 - 960
25.87
0.09
31.5
880 - 915
26.2
0.09
31.9
925 - 960
25.87
0.09
31.5
1429 - 1453
22.31
0.12
28.1
17.5
1710 - 1785
20.51
0.15
26.4
1805 - 1880
20.03
0.15
26
1850 - 1910
19.87
0.16
26
1930 - 1990
19.57
0.17
25.5
16.5
1895 - 1920
19.77
0.16
25.7
1880 - 1900
19.87
0.16
25.8
2400 - 2484
17.7
0.22
23.9
3450 - 3550
14.85
0.56
20.6
16
4950 - 5050
12.4
0.95
17.8
11
5450 - 5550
11.83
1.2
17.1
9
5950 - 6050
11.08
1.33
15.9

Thin-Film Directional Couplers


CP0402 / CP0603 High Directivity Couplers Test Jigs
GENERAL DESCRIPTION
These jigs are designed for testing the CP0402 and CP0603
High Directivity Couplers using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.254mm (0.010") from the microstrips.
The substrate used is Neltecs NH9338ST0254C1BC.

The connectors are SMA type (female), Johnson Components


Inc. Product P/N: 142-0701-841.
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 SMA termination.

MEASUREMENT PROCEDURE
When measuring a component, it can be either soldered or
pressed using a non-metallic stick until all four ports touch
the appropriate pads. Set the VNA to the relevant frequency
band. Connect the VNA using a 10dB attenuator on the jig

terminal connected to port 2. Follow the VNAs instruction


manual and use the calibration jig to perform a full 2-Port
calibration in the required bandwidths.

Place the coupler on the measurement jig as follows:


Input (Coupler) Connector 1 (Jig)
Output (Coupler) Connector 2 (Jig)

Termination (Coupler) Connector 3 (Jig)


Coupling (Coupler) Connector 4 (Jig)

To measure I. Loss connect:


Connector 1 (Jig) Port 1 (VNA) Connector 3 (Jig) 50
Connector 2 (Jig) Port 2 (VNA) Connector 4 (Jig) 50

To measure R. Loss and Coupling connect:


Connector 1 (Jig) Port 1 (VNA) Connector 3 (Jig) 50
Connector 2 (Jig) 50
Connector 4 (Jig) Port 2 (VNA)

To measure Isolation connect:


Connector 1 (Jig) 50
Connector 3 (Jig) 50
Connector 2 (Jig) Port 1 (VNA) Connector 4 (Jig) Port 2 (VNA)

Measurement Jig
Connector 1

Calibration Jig
Short Line
to GND.

OPEN

HS

Connector 2

Connector
Johnson
P/N 142-0701-841

TH

Open
Line

Connector 4

Connector 3

Load &
Through

Load &
Through

59

Thin-Film Directional Couplers


CP0603 SMD Type
DIMENSIONS:

GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY

millimeters (inches)

The ITF SMD Coupler is based on thin-film multilayer technology.


The technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Coupler is offered in a variety of frequency bands compatible with
various types of high frequency wireless systems.

L
T

B1
A

APPLICATIONS

FEATURES

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs

Top View

Bottom View

Miniature Size: 0603


Frequency Range: 800MHz - 3GHz
Characteristic Impedance: 50
Operating / Storage Temp.: -40C to +85C
Power Rating: 3W Continuous
Low Profile
Rugged Construction
Taped and Reeled

0603
1.60.1
(0.0630.004)
0.840.1
(0.0330.004)
0.600.1
(0.0280.004)
0.350.15
(0.0140.006)
0.1750.1
(0.0070.004)
0.00+0.1/0-0.0
(0.00+0.004/-0.0)

L
W
T
A
B
B1

HOW TO ORDER
CP

0603

****

TR

Style

Size

Sub Type

Termination
Code

Packaging Code

0603

Type

Frequency

Directional Coupler

MHz

TR = Tape and Reel

W = Sn90, Pb10
**S = Sn100

**RoHS compliant

TERMINALS (Top View)

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

OUT

Not RoHS Compliant

50 OHM
LEAD-FREE COMPATIBLE
COMPONENT

TERMINATION
Nickel/Solder coating compatible with automatic soldering
technologies: reflow, wave soldering, vapor phase and
manual.

IN

COUPLING
For RoHS compliant products,
please select correct termination style.

Recommended Pad Layout Dimensions


mm (inches)
1.85
(0.073)
0.45
(0.018)

0.28
1.08
(0.011) (0.043)

60

Orientation in tape

Thin-Film Directional Couplers


CP0603 SMD Type
Coupler P/N CP0603A****AS

PDC
PCN
PCS
PHP
DECT
Wireless LAN

0.25

0.4
0.6

1.2

0.65
0.6

I. Loss

-10

-2

Coupling

Isolation

-20
-30

-8

-50

-10

-60
0.5

1.0

1.5

0.85

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Coupling
[dB]
161
15.51
15.51
151
15.51
151
11.51
101
9.51
91
91
91
91
7.51

0.25

0.55

0.8

1.2

1.3

1.4

GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling
[dB]
211
20.51
20.51
201
20.51
201
16.51
151
14.51
14.51
141
14.51
14.51
12.51

-12
3.5

3.0

-10

I. Loss

-2

Coupling
Return Loss

-20

-6

-40

-8

-50

-10
1.0

1.5

2.0

-12
3.0

2.5

Frequency (GHz)

I. Loss VSWR
max
max
0.25

0.40

-4

Isolation

-30

-60
0.5

1.1

1.2

0.5

0
Coupling, Return Loss,
Isolation (dB)

AMPS

P/N
Examples
CP0603A0836CS
CP0603A0881CS
CP0603A0902CS
CP0603A0947CS
CP0603A0897CS
CP0603A0942CS
CP0603A1441CS
CP0603A1747CS
CP0603A1842CS
CP0603A1880CS
CP0603A1960CS
CP0603A1907CS
CP0603A1890CS
CP0603A2442CS

2.5

CP0603A****BS
I. Loss VSWR
max
max

Coupler P/N CP0603A****CS


Application

2.0

Frequency (GHz)

Coupling, Return Loss,


Isolation (dB)

Application

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

-6

-40

Coupler P/N CP0603A****BS


P/N
Examples
CP0603A0836BS
CP0603A0881BS
CP0603A0902BS
CP0603A0947BS
CP0603A0897BS
CP0603A0942BS
CP0603A1441BS
CP0603A1747BS
CP0603A1842BS
CP0603A1880BS
CP0603A1960BS
CP0603A1907BS
CP0603A1890BS
CP0603A2442BS

-4

Return Loss

I. Loss (dB)

E-GSM

CP0603A****AS

I. Loss VSWR
max
max

I. Loss (dB)

GSM

Coupling
[dB]
18.51
18.51
181
17.51
181
17.51
141
12.51
121
121
11.51
121
121
101

CP0603A****CS

-10
-20

Coupling

Isolation

-30
Return Loss

-40
-50
-60
-70
0.5

0.65

0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
3.5

I. Loss

1.0

1.5

2.0

2.5

3.0

I. Loss (dB)

AMPS

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling, Return Loss,


Isolation (dB)

Application

P/N
Examples
CP0603A0836AS
CP0603A0881AS
CP0603A0902AS
CP0603A0947AS
CP0603A0897AS
CP0603A0942AS
CP0603A1441AS
CP0603A1747AS
CP0603A1842AS
CP0603A1880AS
CP0603A1960AS
CP0603A1907AS
CP0603A1890AS
CP0603A2442AS

Frequency (GHz)

Coupler P/N CP0603A****DS

GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Coupling
[dB]
15.01
14.51
14.51
141
14.51
141
10.51
91
8.51
8.51
81
8.51
8.51
6.51

CP0603A****DS

I. Loss VSWR
max
max
0.40

0.7

1.2

1.3

0.9
1.0
1.5

Important: Couplers can be used at any frequency within the indicated range.

1.5

0
I. Loss
-10
Coupling

Return Loss

-20
Isolation
-30
-40
-50
-60
0.5

0.7

0.9

1.1

1.3

1.5

1.7

1.9

2.1

2.3

0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
2.5

I. Loss (dB)

AMPS

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling, Return Loss,


Isolation (dB)

Application

P/N
Examples
CP0603A0836DS
CP0603A0881DS
CP0603A0902DS
CP0603A0947DS
CP0603A0897DS
CP0603A0942DS
CP0603A1441DS
CP0603A1747DS
CP0603A1842DS
CP0603A1880DS
CP0603A1960DS
CP0603A1907DS
CP0603A1890DS
CP0603A2442DS

Frequency (GHz)

61

Thin-Film Directional Couplers


CP0603 SMD Type
Coupler P/N CP0603B****AS

E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

I. Loss VSWR
max
max
0.2

0.25

1.2

CP0603B****AS

0.3

-10

GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling
[dB]
25.51
251
251
24.51
251
24.51
211
191
191
18.51
18.51
18.51
18.51
16.51

Coupling

-3
-5

Isolation

-30

-7
Return Loss

-40

-9

-50
-60
0.5

-11
1.0

1.5

2.0

0.45

2.5

3.0

3.5

-13
4.0

Frequency (GHz)

CP0603B****BS

I. Loss VSWR
max
max

0.2
1.2
0.25

0
Coupling, Return Loss,
Isolation (dB)

AMPS

P/N
Examples
CP0603B0836BS
CP0603B0881BS
CP0603B0902BS
CP0603B0947BS
CP0603B0897BS
CP0603B0942BS
CP0603B1441BS
CP0603B1747BS
CP0603B1842BS
CP0603B1880BS
CP0603B1960BS
CP0603B1907BS
CP0603B1890BS
CP0603B2442BS

-1

-20

Coupler P/N CP0603B****BS


Application

I. Loss

I. Loss (dB)

GSM

Coupling
[dB]
24.51
241
241
23.51
241
23.51
201
181
17.51
17.51
17.51
17.51
17.51
15.51

-2

-15
-20

Coupling

-25

Return Loss

-4
-6

-30
-35
-40
-45
-50
0.5

0.35

I. Loss

-5
-10

Isolation

1.0

1.5

I. Loss (dB)

AMPS

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling, Return Loss,


Isolation (dB)

Application

P/N
Examples
CP0603B0836AS
CP0603B0881AS
CP0603B0902AS
CP0603B0947AS
CP0603B0897AS
CP0603B0942AS
CP0603B1441AS
CP0603B1747AS
CP0603B1842AS
CP0603B1880AS
CP0603B1960AS
CP0603B1907AS
CP0603B1890AS
CP0603B2442AS

-8

2.0

2.5

3.0

3.5

-10
4.0

Frequency (GHz)

Coupler P/N CP0603B****CS

GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Coupling
[dB]
26.51
261
261
25.51
261
25.51
221
20.51
201
201
19.51
201
201
181

CP0603B****CS
I. Loss VSWR
max
max

0.2
1.2

0.25

0.35

Important: Couplers can be used at any frequency within the indicated range.

62

1.3

0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0.5

I. Loss

-2
Coupling

-4
-6

Return Loss

-8

Isolation

1.0

1.5

2.0

2.5

Frequency (GHz)

3.0

3.5

-10
4.0

I. Loss (dB)

AMPS

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling, Return Loss,


Isolation (dB)

Application

P/N
Examples
CP0603B0836CS
CP0603B0881CS
CP0603B0902CS
CP0603B0947CS
CP0603B0897CS
CP0603B0942CS
CP0603B1441CS
CP0603B1747CS
CP0603B1842CS
CP0603B1880CS
CP0603B1960CS
CP0603B1907CS
CP0603B1890CS
CP0603B2442CS

Thin-Film Directional Couplers


CP0603 SMD Type High Directivity
Coupler P/N CP0603D****AS
-5

-4

-10

Coupling

-15
-20
-25

-2

1.0

1.2

CP0603D0836BS
CP0603D0881BS
CP0603D0902BS
GSM
CP0603D0947BS
CP0603D0897BS
E-GSM
CP0603D0942BS
PDC
CP0603D1441BS
CP0603D1747BS
PCN
CP0603D1842BS
CP0603D1880BS
PCS
CP0603D1960BS
PHP
CP0603D1907BS
DECT
CP0603D1890BS
Wireless LAN CP0603D2442BS
AMPS

-12

1.4

-14
1.6

1.8

2.0

2.2

-16
2.4

CP0603D****BS
0
Coupling, Return Loss,
Isolation (dB)

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
20.00
36
869 - 894
19.50
890 - 915
35
0.25
935 - 960
19.00
880 - 915
19.50
36
925 - 960
19.00
35
19
1429 - 1453 15.50
0.40
30
1710 - 1785 14.00
0.50
28
1805 - 1880
1850 - 1910 13.50
1930 - 1990
0.55
27
1895 - 1920
13.00
1880 - 1900
2400 - 2484 11.00
0.70
24

-10

Frequency (GHz)

Coupler P/N CP0603D****BS


P/N
Examples

-8

Isolation

-35
-40
0.8

-6

Return Loss

-30

I. Loss (dB)

CP0603D0836AS
AMPS
CP0603D0881AS
CP0603D0902AS
GSM
CP0603D0947AS
CP0603D0897AS
E-GSM
CP0603D0942AS
PDC
CP0603D1441AS
CP0603D1747AS
PCN
CP0603D1842AS
CP0603D1880AS
PCS
CP0603D1960AS
PHP
CP0603D1907AS
DECT
CP0603D1890AS
Wireless LAN CP0603D2442AS

I. Loss

0
-1

I. Loss

-5
-10

-2

Coupling

-15

-3
-4

-20
-25
-30
-35

-6
-7

Isolation

-40
-45
0.8

-5

Return Loss

1.0

1.2

1.4
1.6
1.8
Frequency (GHz)

I. Loss (dB)

P/N
Examples

CP0603D****AS
0
Coupling, Return Loss,
Isolation (dB)

Application

Frequency Coupling I. Loss Return Directivity


Band
[dB]
max. Loss
[dB]
[MHz]
[dB]
[dB]
824 - 849
13.50
23
869 - 894
13.00
890 - 915
935 - 960
12.50
0.50
22
21
880 - 915
13.00
925 - 960
12.50
1429 - 1453
9.00
1.00
18
19
1710 - 1785
8.00
18
17
1805 - 1880
7.50
1850 - 1910
1930 - 1990
1.40
17
1895 - 1920
7.00
16
1880 - 1900
2400 - 2484
5.50
2.00
15
15

2.0

2.2

-8
-9
2.4

Important: Couplers can be used at any frequency within the indicated range.

63

Thin-Film Directional Couplers


CP0805 SMD Type
GENERAL DESCRIPTION
ITF (Integrated Thin-Film) TECHNOLOGY

DIMENSIONS:
(Top View)

The ITF SMD Coupler is based on thin-film multilayer technology.


The technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Coupler is offered in a variety of frequency bands compatible with
various types of high frequency wireless systems.

FEATURES

millimeters (inches)

W
B

L
T

APPLICATIONS

Small Size: 0805


Frequency Range: 800MHz - 3GHz
Characteristic Impedance: 50
Operating / Storage Temp.:
-40C to +85C
Power Rating: 3W Continuous
Low Profile
Rugged Construction
Taped and Reeled

Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs

A
0805
2.030.1 (0.0800.004)
1.550.1 (0.0610.004)
0.980.1 (0.0390.004)
0.560.25 (0.0220.010)
0.350.15 (0.0140.006)

L
W
T
A
B

HOW TO ORDER
CP

0805

Style

Size

Directional Coupler

0805

0902

TR

Layout Type

Frequency

Sub Type
(see layout
sub-types)

Termination
Code

Packaging Code

MHz

(see layout types)

Not RoHS Compliant

TR = Tape and Reel

W = Nickel/Solder
(Sn/Pb)
**S = Nickel / Lead
Free Solder
(Sn100)
**RoHS compliant

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

TERMINATION
Nickel/Solder coating (Sn, Pb) compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.

Recommended Pad Layout Dimensions mm (inches)

2.33
(0.092)
0.60
(0.024)

2.25
0.65 (0.089)
(0.026)

NOTE: Components must be mounted on the board with the white (Alumina)
side DOWN.

64

Thin-Film Directional Couplers


CP0805 Layout Types
LAYOUT

Sn100 LAYOUT
50 OHM
(External
Resistor)

RF IN
Port

RF OUT
Port

COUP

50 OHM

COUP
Port

50 OHM
(External
Resistor)

RF IN
Port

RF OUT
Port

COUP

50 OHM

RF IN

RF OUT

Type: A
Sub-Type: A

-15
dB

-20

-1

-25
-30

-35

Isolation

-35
-40
-45
-50
0.60

0.80

1.00

1.20

1.60

1.40

1.80

-2
-3
-4

-20
-25
-30

-1

Coupling

-15

R. Loss

RF OUT

I. Loss

-10

Coupling

RF IN

Type: A
Sub-Type: B

-5

dB

-10

I. Loss

I. Loss (dB)

0
-5

COUP
Port

Sn100 LAYOUT

Isolation

-5
-6

R. Loss

-7

-40

-8

-45
-50
0.60

-9
0.80

1.00

2.00

1.20

I. Loss (dB)

LAYOUT

1.60

1.40

1.80

-10
2.00

Frequency (GHz)

Frequency (GHz)

Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT

P/N
Examples
CP0805A0836AW
CP0805A0881AW
CP0805A0902AW
CP0805A0947AW
CP0805A0897AW
CP0805A0942AW
CP0805A1441AW
CP0805A1747AW
CP0805A1842AW
CP0805A1880AW
CP0805A1960AW
CP0805A1907AW
CP0805A1890AW

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900

Coupling
[dB]
16.51
161
161
15.51
161
15.51
121
10.51
101
9.51
9.51
9.51
9.51

I. Loss VSWR
max
max
0.25

Application
AMPS
GSM

1.2

E-GSM
PDC

0.5
0.7
0.8

1.3
1.4

PCN
PCS
PHP
DECT
Wireless LAN

P/N
Examples
CP0805A0836BW
CP0805A0881BW
CP0805A0902BW
CP0805A0947BW
CP0805A0897BW
CP0805A0942BW
CP0805A1441BW
CP0805A1747BW
CP0805A1842BW
CP0805A1880BW
CP0805A1960BW
CP0805A1907BW
CP0805A1890BW
CP0805A2442BW

LAYOUT
50 OHM

dB

-15
-20
-25
-30

COUP

0.25

1.2

0.35
0.5
0.6
0.7
0.6

1.4

0.9

50 OHM

RF IN
IN

0
-10

I. Loss VSWR
max
max

Sn100 LAYOUT

Type: A
Sub-Type: C
-5

Coupling
[dB]
191
18.51
181
181
18.51
181
14.51
12.51
12.51
121
11.51
121
121
101

COUP

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

RF OUT

OUT

I. Loss
Coupling

Application

Isolation

AMPS

R. Loss

GSM
E-GSM

-35
-40

PDC

-45
-50
0.60

PCN
0.80

1.00

1.20

1.40

1.60

1.80

2.00

2.20

2.40

Frequency (GHz)

Important: Couplers can be used at any frequency within the indicated range.

PCS
PHP
DECT
Wireless LAN

P/N
Examples
CP0805A0836CW
CP0805A0881CW
CP0805A0902CW
CP0805A0947CW
CP0805A0897CW
CP0805A0942CW
CP0805A1441CW
CP0805A1747CW
CP0805A1842CW
CP0805A1880CW
Cp0805A1960CW
CP0805A1907CW
CP0805A1890CW
CP0805A2442CW

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling
[dB]
141
13.51
13.51
131
13.51
131
9.51
81
81
7.51
7.51
7.51
7.51
61

I. Loss VSWR
max
max
0.5
1.4
1.15
1.6

1.8

1.75

2.2

2.5

65

Thin-Film Directional Couplers


CP0805 Layout Types
LAYOUT

COUP

Sn100 LAYOUT

50 OHM

COUP

50 OHM

COUP

RF IN

IN

IN

RF OUT

0
I. Loss

-10

Isolation
dB

-20
-25
-30

Coupling
I. Loss (dB)

Coupling

-15
dB

I. Loss

-5

-10

-15

R. Loss

Isolation
-20

-35
-40

-25

-45
-50
0.60

-30
0.50

0.80

1.00

1.20

1.40

1.60

1.80

2.00

2.20

2.40

R. Loss
0.75

Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

P/N
Examples
CP0805A0836DW
CP0805A0881DW
CP0805A0902DW
CP0805A0947DW
CP0805A0897DW
CP0805A0942DW
CP0805A1441DW
CP0805A1747DW
CP0805A1842DW
CP0805A1880DW
Cp0805A1960DW
CP0805A1907DW
CP0805A1890DW
CP0805A2442DW

1.00

1.25

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling
[dB]
13.01
12.51
12.51
121
12.51
121
8.51
71
71
71
6.51
6.51
71
5.51

I. Loss VSWR
max
max
0.5

1.4

Application
AMPS
GSM
E-GSM

1.25

1.8

PDC
PCN

1.85
2.15

2.1

1.85
2.4

1.8
2.1

PCS
PHP
DECT
Wireless LAN

P/N
Examples
CP0805A0836EW
CP0805A0881EW
CP0805A0902EW
CP0805A0947EW
CP0805A0897EW
CP0805A0942EW
CP0805A1441EW
CP0805A1747EW
CP0805A1842EW
CP0805A1880EW
Cp0805A1960EW
CP0805A1907EW
CP0805A1890EW
CP0805A2442EW

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

LAYOUT
RF IN
Port

-1
-3
-4

R. Loss

-5
-6

Isolation

-45
-50
1.00

RF OUT
Port

-2

Coupling

I. Loss (dB)

dB

-35
-40

-7
-8

1.20

1.40

1.60

1.80

2.00

2.20

-9
-10
2.40

Frequency (GHz)

Application
AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

Important: Couplers can be used at any frequency within the indicated range.

66

2.00

Coupling
[dB]
111
10.51
10.51
101
10.51
101
71
5.51
5.51
51
51
51
51
41

I. Loss VSWR
max
max
0.85

1.4

1.8

1.8

2.7

2.2

3.15

2.4

4.2

Sn100 LAYOUT
COUP Port

RF IN

0
I. Loss
-5

-25
-30

1.75

COUP

Type: B
Sub-Type: A

-15
-20

1.50

Frequency (GHz)

Frequency (GHz)

-10

RF OUT

Type: A
Sub-Type: E

RF IN

OUT

OUT

Type: A
Sub-Type: D
-5

50 OHM

50 OHM

COUP

LAYOUT

Sn100 LAYOUT

50 OHM
(External
Resistor)

P/N
Examples
CP0805B0836AW
CP0805B0881AW
CP0805B0902AW
CP0805B0947AW
CP0805B0897AW
CP0805B0942AW
CP0805B1441AW
CP0805B1747AW
Cp0805B1842AW
CP0805B1880AW
CP0805B1960AW
CP0805B1907AW
CP0805B1890AW
CP0805B2442AW

RF OUT

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

50 OHM

Coupling
[dB]
21.51
211
211
20.51
211
20.51
171
15.51
15.51
151
14.51
151
151
131

I. Loss VSWR
max
max

0.25

1.2
0.3
0.4
0.3
0.4

Thin-Film Directional Couplers


CP0805 Layout Types
RF IN
Port

LAYOUT

Sn100 LAYOUT
COUP Port

RF IN

RF IN
Port

COUP Port

RF IN

50 OHM
(External
Resistor)

RF OUT
Port

RF OUT

50 OHM

50 OHM
(External
Resistor)

RF OUT
Port

R. Loss

-35
-40

Isolation

-45
-50
1.00

-1
-2

-5

-3
-4
-5

Coupling

-25
-30

-6

-15
-20

-7
-8

1.40

1.60

1.80

2.00

2.20

2.40

-35
-40

AMPS
GSM
E-GSM
PDC
PCN
PCS
PHP
DECT
Wireless LAN

P/N
Examples
CP0805B0836BW
CP0805B0881BW
CP0805B0902BW
CP0805B0947BW
CP0805B0897BW
CP0805B0942BW
CP0805B1441BW
CP0805B1747BW
CP0805B1842BW
CP0805B1880BW
CP0805B1960BW
CP0805B1907BW
CP0805B1890BW
CP0805B2442BW

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

0
I. Loss

-1
-2
-3

Coupling

-4
-5

R. Loss

-6
-7

Isolation

-8
-9

-45

-10
2.60

-50
1.10

Frequency (GHz)

Application

-25
-30

-9
1.20

50 OHM

-10

dB

I. Loss

I. Loss (dB)

dB

-15
-20

RF OUT

Type: B
Sub-Type: C

Type: B
Sub-Type: B
0
-5
-10

COUP

COUP

Sn100 LAYOUT

I. Loss (dB)

LAYOUT

1.30

1.50

1.70

1.90

2.10

2.30

-10
2.50

Frequency (GHz)

Coupling
[dB]
23.51
231
22.51
221
231
221
18.51
171
16.51
16.51
161
161
161
141

I. Loss VSWR
max
max

Application
AMPS
GSM
E-GSM

0.25

PDC
1.2

PCN
PCS

0.4

PHP
DECT
Wireless LAN

P/N
Examples
CP0805B0836CW
CP0805B0881CW
CP0805B0902CW
CP0805B0947CW
CP0805B0897CW
CP0805B0942CW
CP0805B1441CW
CP0805B1747CW
Cp0805B1842CW
CP0805B1880CW
Cp0805B1960CW
CP0805B1907CW
CP0805B1890CW
CP0805B2442CW

Frequency
Band [MHz]
824 - 849
869 - 894
890 - 915
935 - 960
880 - 915
925 - 960
1429 - 1453
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
2400 - 2484

Coupling
[dB]
251
24.51
241
241
24.51
241
201
18.51
18.51
181
17.51
181
181
161

I. Loss VSWR
max
max

0.25
1.2

0.4

Important: Couplers can be used at any frequency within the indicated range.

67

Thin-Film Directional Couplers


CP0805 Layout Types
UHF DIRECTIONAL COUPLER
CP0805L0436BSTR
Sn100 LAYOUT

VHF DIRECTIONAL COUPLER


CP0805L0155ASTR
Sn100 LAYOUT
COUP

OUT

50
OHM

P/N

Frequency
[MHz]

Coupling
[dB]

R. Loss
[dB]

CP0805L0155ASTR

155

17.11

24

IN

I. Loss
max
[dB]
0.35

P/N

Frequency
[MHz]

Coupling
[dB]

R. Loss
[dB]

22

CP0805L0436BSTR

403-470

15.851

35

-40

-16

Isolation
300

400

500

-20
600

Frequency (MHz)

Important: Couplers can be used at any frequency within the indicated range.

68

-1
-2

-30
-40
-50

-3

Isolation

-4

R. Loss

-60
200

300

-5

400

500

600

Frequency (MHz)

700

-6
800

I. Loss (dB)

-12

R. Loss

200

22

I. Loss

-20

dB

dB

-8

-50
100

Directivity
[dB]

Coupling

-20
-30

I. Loss
max
[dB]
0.25

-10

-4

Coupling

I. Loss (dB)

-10

OUT

Directivity
[dB]

I. Loss

50
OHM

COUP

IN

Thin-Film Directional Couplers


CP0805 and CP0603 Test Jig
ITF TEST JIG FOR COUPLER TYPES 0805 AND 0603 SMD
GENERAL DESCRIPTION
MEASUREMENT PROCEDURE
This jig is designed for the testing of CP0805 and CP0603
series Directional Couplers using a vector network analyzer.
It consists of a FR4 multi-layer substrate, having 50
microstrips as conducting lines and a ground plane in the
middle layer, located at a distance of 0.2mm from the
microstrips.
The connectors are SMA type (female), Johnson Components
Inc. Product P/N: 142-0701-881.
The jig is designed for a full 2-port calibration. LOAD calibration
can be done either by a 50 SMA termination, or by soldering
a 50 chip resistor at the 50 ports.

When measuring a component, it can be either soldered or


pressed by a non-metallic stick until all four ports touch the
appropriate pads. To measure the coupling (and the R. Loss)
place the component on the Port 1 & Port 2 pads. Use two
SMA 50 terminations (male) to terminate the ports, which
are not connected to the network analyzer, and connect
the network analyzer to the two ports. A 90 rotation of
the component on its pads allows measuring a second
parameter (I. Loss).

Connector (1 of 12)
P/N 142-0701-881

Load & Thru


Calibration Area
Short

Open

Port 1

Port 2

Coupler 0805
50

50

Port 1

Port 2

Coupler 0603
50

50

CP0805 SERIES DIRECTIONAL COUPLERS


Orientation and Tape and Reel Packaging Specification

CP0805xxxxxxSTR (Sn100)

(Top View)

(Top View)

COUP

50
OHM

COUP

50
OHM

COUP

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

TYPE AA

TYPE AB

COUP

50
OHM

COUP

50
OHM

COUP

50
OHM

COUP

50
OHM

COUP

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

RF
OUT

RF
IN

RF
IN

COUP

RF
OUT

50
OHM
TYPE BA

TYPE AE

RF
IN

COUP

RF
OUT

50
OHM
TYPE BB

TYPE AC

RF
IN

COUP

RF
OUT

50
OHM
TYPE BC

The parts should be mounted on the PCB with White (Alumina)


side down and the "dark" side up.

TYPE AD

50
OHM
RF
OUT

TYPE AE

RF
IN

COUP

RF
IN

COUP

RF
IN

COUP

RF
OUT

50
OHM

RF
OUT

50
OHM

RF
OUT

50
OHM

TYPE BA

TYPE AD

TYPE AC

50
OHM

COUP

TYPE AB

RF
OUT

TYPE BB

TYPE AA

50
OHM

50
OHM

COUP

TYPE BC

The parts should be mounted on the PCB with printed side up.

69

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
FEATURES

GENERAL DESCRIPTION
RFAP TECHNOLOGY

The DB0603N 3dB 90 Coupler is based on thin-film


multilayer technology. The technology provides a
miniature part with excellent high frequency performance
and rugged construction for reliable automatic assembly.
The RFAP LGA 3dB 90 Coupler will be offered in a variety
of frequency bands compatible with various types of high
frequency wireless systems.

APPLICATIONS

LAND GRID ARRAY


ADVANTAGES:

Miniature 0603 size


Low I. Loss
High Isolation
Surface Mountable
RoHS Compliant
Supplied on T&R
Power Rating:
10W RF
Continuous

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation

DIMENSIONS:

Balanced Amplifiers and Signal Distribution in


Wireless Communications

Bottom View

millimeters (inches)
1.600.10
(0.0630.004)
0.840.10
(0.0330.004)
0.600.10
(0.0240.004)
0.250.05
(0.0100.002)
0.200.05
(0.0080.002)
0.050.05
(0.0020.002)

Recommended Pad Layout Dimensions

mm (inches)
W

T
A

1.10
(0.043)

0.40
(0.016)

0.50
(0.020)

B
A

L
T
W

ORIENTATION IN TAPE

1.75 (0.069)
50
OHM

OUT 1

IN

OUT 2

ELECTRICAL PARAMETERS
Part Number

DB0603N2140ANTR
DB0603N2400ANTR
DB0603N2600ANTR
DB0603N3000ANTR
DB0603N3500ANTR
DB0603N4600ANTR
DB0603N5500ANTR
DB0603N5800ANTR

Frequency
MHz
Min.
2040
2300
2400
2850
3300
4200
5100
5600

Max.
2240
2500
2800
3150
3700
5000
5900
6000

Port
Impedance

Typ.
50
50
50
50
50
50
50
50

NOTE: Additional Frequencies Available Upon Request

70

Return Loss
[dB]
Min.
15
12
12
12
12
12
12
12

Typ.
26
17
17
15
15
16
16
16

Isolation
[dB]
Min.
15
15
15
15
15
12
10
12

Typ.
23
23
23
26
26
15
14
17

Insertion Loss
[dB]
Typ.
0.30
0.25
0.25
0.20
0.20
0.50
0.60
0.40

Max.
0.40
0.35
0.35
0.30
0.30
0.70
0.80
0.90

Ampltidue
Balance
[dB]
Typ.
Max.
0.50
0.80
0.30
0.80
0.30
0.80
0.30
0.80
0.30
0.80
0.40
1.00
0.80
1.50
0.30
0.90

Phase Balance
(Relative to 90)
Deg
Typ.
Max
2
3
2
3
2
3
2
3
2
3
1.5
3
1
3
2
3

Power
Handing
Watts
Max.
10
10
10
10
10
10
10
10

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2040MHz to 2240MHz DB0603N2140ANTR
Return Loss - Input
-20
-22

dB

-24
-26
-28
-30
2030

2060

2090

2120

2150

2180

2210

2240

Frequency (MHz)

Insertion Loss
0

dB

-0.6

-1.2

-1.8
2030

2060

2090

2120

2150

2180

2210

2240

Frequency (MHz)

Amplitude Balance
2

dB

-1

-2
2030

2060

2090

2120

2150

2180

2210

2240

Frequency (MHz)

71

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2040MHz to 2240MHz DB0603N2140ANTR
Phase Balance
8

dB

-4

-8
2030

2060

2090

2120

2150

2180

2210

2240

2180

2210

2240

Frequency (MHz)

Isolation
-16
-18

dB

-20
-22
-24
-26
2030

2060

2090

2120

2150

Frequency (MHz)

72

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2200MHz to 2600MHz DB0603N2400ANTR
Return Loss - Input
-10
-12

dB

-14
-16
-18
-20
2200

2300

2400

2500

2600

Frequency (MHz)

Insertion Loss
0

dB

-0.6

-1.2

-1.8
2200

2300

2400

2500

2600

2500

2600

Frequency (MHz)

Amplitude Balance
2

dB

-1

-2
2200

2300

2400
Frequency (MHz)

73

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2200MHz to 2600MHz DB0603N2400ANTR
Phase Balance
8

dB

-4

-8
2200

2300

2400

2500

2600

2500

2600

Frequency (MHz)

Isolation
-20
-22

dB

-24
-26
-28
-30
2200

2300

2400
Frequency (MHz)

74

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2400MHz TO 2800MHz DB0603N2600ANTR
Return Loss - Input
-10
-12

dB

-14
-16
-18
-20
2400

2500

2600

2700

2800

Frequency (MHz)

Insertion Loss
0

dB

-0.6

-1.2

-1.8
2400

2500

2600

2700

2800

2700

2800

Frequency (MHz)

Amplitude Balance
2

dB

1
0
-1
-2
2400

2500

2600
Frequency (MHz)

75

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2400MHz TO 2800MHz DB0603N2600ANTR
Phase Balance
8

dB

4
0
-4
-8
2400

2500

2600

2700

2800

2700

2800

Frequency (MHz)

Isolation
-20

dB

-22
-24
-26
-28
-30
2400

2500

2600
Frequency (MHz)

76

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2850MHz to 3150MHz DB0603N3000ANTR
Return Loss - Input
-10
-12

dB

-14
-16
-18
-20
2800

2900

3000

3100

3200

Frequency (MHz)

Insertion Loss
0

dB

-0.6

-1.2

-1.8
2800

2900

3000

3100

3200

3100

3200

Frequency (MHz)

Amplitude Balance
2

dB

-1

-2
2800

2900

3000
Frequency (MHz)

77

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
2850MHz to 3150MHz DB0603N3000ANTR
Phase Balance
8

dB

-4

-8
2800

2900

3000

3100

3200

3100

3200

Frequency (MHz)

Isolation
-20
-22

dB

-24
-26
-28
-30
2800

2900

3000
Frequency (MHz)

78

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
3200MHz to 3800MHz DB0603N3500ANTR
Return Loss - Input
-10
-12

dB

-14
-16
-18
-20
3200

3300

3400

3500

3600

3700

3800

Frequency (MHz)

Insertion Loss
0

dB

-0.6

-1.2

-1.8
3200

3300

3400

3500

3600

3700

3800

3700

3800

Frequency (MHz)

Amplitude Balance
2

dB

-1

-2
3200

3300

3400

3500

3600

Frequency (MHz)

79

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
3200MHz to 3800MHz DB0603N3500ANTR
Phase Balance
8

dB

-4

-8
3200

3300

3400

3500

3600

3700

3800

3600

3700

3800

Frequency (MHz)

Isolation
-20
-22

dB

-24
-26
-28
-30
3200

3300

3400

3500
Frequency (MHz)

80

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
4200MHz TO 5000MHz DB0603N4600ANTR
Return Loss - Input
-12

dB

-14
-16
-18
-20
4200

4400

4600

4800

5000

Frequency (MHz)

Isolation
-12

dB

-14

-16

-18
4200

4400

4600

4800

5000

4800

5000

Frequency (MHz)

Insertion Loss

dB

-0.2
-0.4
-0.6
-0.8
4200

4400

4600
Frequency (MHz)

81

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
4200MHz TO 5000MHz DB0603N4600ANTR
Amplitude Balance
1

dB

0.5

-0.5

-1
4200

4400

4600

4800

5000

Frequency (MHz)

Phase Balance
3
2

deg

1
0
-1
-2
-3
4200

4400

4600
Frequency (MHz)

82

4800

5000

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
5100MHz TO 5900MHz DB0603N5500ANTR
Return Loss - Input
-12

dB

-14

-16

-18

-20
5100

5200

5300

5400

5500

5600

5700

5800

5900

Frequency (MHz)

Isolation
-10

dB

-12

-14

-16

-18
5100

5200

5300

5400

5500

5600

5700

5800

5900

5700

5800

5900

Frequency (MHz)

Insertion Loss
-0.2

dB

-0.4

-0.6

-0.8
5100

5200

5300

5400

5500

5600

Frequency (MHz)

83

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
5100MHz TO 5900MHz DB0603N5500ANTR
Amplitude Balance
1.5

dB

0.5

0
5100

5200

5300

5400

5500

5600

5700

5800

5900

5700

5800

5900

Frequency (MHz)

Phase Balance
3
2

dB

1
0
-1
-2
-3
5100

5200

5300

5400

5500

5600

Frequency (MHz)

84

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
5600MHz TO 6000MHz DB0603N5800ANTR
Return Loss - Input
-10
-12

dB

-14
-16
-18
-20
5600

5700

5800

5900

6000

Frequency (MHz)

Isolation
-12

dB

-14

-16

-18

-20
5600

5700

5800

5900

6000

5900

6000

Frequency (MHz)

Insertion Loss
0
-0.2

dB

-0.4
-0.6
-0.8
-1
5600

5700

5800
Frequency (MHz)

85

Thin-Film Directional Couplers


DB0603N 3dB 90 Couplers
5600MHz TO 6000MHz DB0603N5800ANTR
Amplitude Balance
1

dB

0.5

-0.5

-1
5600

5700

5800

5900

6000

Frequency (MHz)

Phase Balance
3
2

deg

1
0
-1
-2
-3
5600

5700

5800
Frequency (MHz)

86

5900

6000

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
GENERAL DESCRIPTION
ITF TECHNOLOGY
The ITF SMD 3dB 90 Coupler is based on thin-film multilayer
technology. The technology provides a miniature part with excellent
high frequency performance and rugged construction for reliable
automatic assembly.
The ITF 3dB 90 Coupler is offered in a variety of frequency bands
compatible with various types of high frequency wireless
systems.

Recommended Pad Layout Dimensions


2.24 (0.088)
0.70
(0.028)

mm (inches)

APPLICATIONS

FEATURES

Balanced Amplifiers and


Signal Distribution in
Mobile Communications

DIMENSIONS:

Bottom View

millimeters (inches)
2.030.10
(0.0800.004)
1.550.10
(0.0610.004)
0.980.15
(0.0370.006)
0.560.25
(0.0220.010)
0.350.15
(0.0140.006)

L
W
T

GROUND

Miniature 0805 size


Low I. Loss
High Isolation
Power Handling:
10W RF CW
Surface Mountable
Supplied on Tape and Reel
Operating Temperature
-40C to +85C

1.76
0.64 (0.069)
(0.025)

A
B

3
A

TERMINALS (Top View)


Orientation in Tape
0.15 (0.006) TYP.
50
OHM

IN

OUT1

50
OHM

OUT2

IN

OUT1
Code Letter
Marking
OUT2

ELECTRICAL PARAMETERS*
Part Number**
DB0805A0880ASTR
DB0805A0915ASTR
DB0805A0967ASTR
DB0805A1350ASTR
DB0805A1650ASTR
DB0805A1800ASTR
DB0805A1850ASTR
DB0805A1900ASTR
DB0805A1950ASTR
DB0805A2140ASTR
DB0805A2325ASTR

Frequency FO
[MHz]
88030
91530
96730
135050
165050
180050
185050
190050
195050
214050
232550

I. Loss @ FO
[dB]
0.35
0.35
0.35
0.35
0.35
0.30
0.30
0.30
0.25
0.25
0.25

Phase Balance Code Letter


[deg] max.
Marking
3
Y
3
V
3
V
3
C
3
F
3
F
3
K
3
K
3
K
3
L
3
T

**LEAD FREE TERMINATION


PART NUMBERS:
DB0805AxxxxASTR

LEAD-FREE COMPATIBLE
COMPONENT

*With Recommended Pad Layout


NOTE: Additional Frequencies Available Upon Request

87

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
880 30MHz DB0805A0880ASTR
-3.0
I. Loss 1

dB

-3.2

-3.4
I. Loss 2
-3.6

3
-3.8
850

865

880

895

910

Frequency (MHz)

-10
-12
-14
-16
dB

-18
-20

R. Loss
Isolation

-22
-24
-26
-28
-30
850

855

880
Frequency (MHz)

88

905

930

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
915 30MHz DB0805A0915ASTR
-2.8

-3.0

-3.2
dB

I. Loss 1
-3.4
I. Loss 2

-3.6

-3.8
885

900

915

930

945

Frequency (MHz)
-10
-12
-14
-16
dB

-18
-20

Isolation
R. Loss

-22
-24
-26
-28
-30
865

890

915

940

965

Frequency (MHz)

89

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
967 30MHz DB0805A0967ASTR
-2.8

-3.0

-3.2
dB

I. Loss 1

-3.4
I. Loss 2

-3.6

-3.8
937

952

967

982

997

Frequency (MHz)
-10
-12
-14
-16
dB

-18
-20
-22

R. Loss
Isolation

-24
-26
-28
-30
917

942

967
Frequency (MHz)

90

992

1017

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1350 50MHz DB0805A1350ASTR
-3.0

dB

-3.2

I. Loss 1

-3.4
I. Loss 2
-3.6

-3.8
1300

1350

1400

Frequency (MHz)

-10
-12
-14
-16
dB

-18
-20

Isolation
R. Loss

-22
-24
-26
-28
-30
1300

1350

1400

Frequency (MHz)

91

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1650 50MHz DB0805A1650ASTR
-2.8

-3.0

dB

I. Loss 1
-3.2

-3.4
I. Loss 2

3
-3.6
1550

1600

1650

1700

1750

1700

1750

Frequency (MHz)

-10
-12
-14
-16
dB

-18

Isolation
R. Loss

-20
-22
-24
-26
-28
-30
1550

1600

1650
Frequency (MHz)

92

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1800 50MHz DB0805A1800ASTR
-2.8

-3.0

dB

I. Loss 1
-3.2
I. Loss 2
-3.4

3
-3.6
1750

1775

1800

1825

1850

Frequency (MHz)

-10
-12
-14
-16
dB

-18
-20
-22

Isolation
R. Loss

-24
-26
-28
-30
1750

1775

1800

1825

1850

Frequency (MHz)

93

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1850 50MHz DB0805A1850ASTR
-2.8

-3.0

dB

I. Loss 1
-3.2
I. Loss 2
-3.4

3
-3.6
1800

1825

1850

1875

1900

Frequency (MHz)

-10
-12
-14
-16
dB

-18

R. Loss
Isolation

-20
-22
-24
-26
-28
-30
1800

1825

1850
Frequency (MHz)

94

1875

1900

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1900 50MHz DB0805A1900ASTR
-3.0
I. Loss 1

dB

-3.2
I. Loss 2
-3.4

3
-3.6
1850

1875

1900

1925

1950

Frequency (MHz)

-10
-12
-14
-16
dB

-18
-20
-22

Isolation
R. Loss

-24
-26
-28
-30
1850

1875

1900

1925

1950

Frequency (MHz)

95

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
1950 50MHz DB0805A1950ASTR
-2.8

-3.0

dB

I. Loss 1
-3.2
I. Loss 2
-3.4

-3.6
1900

1925

1950

1975

2000

Frequency (MHz)

-10
-12
-14
-16
dB

-18

R. Loss

-20

Isolation

-22
-24
-26
-28
-30
1900

1925

1950
Frequency (MHz)

96

1975

2000

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
2140 50MHz DB0805A2140ASTR
-2.6
-2.8

dB

-3.0
I. Loss 1
-3.2
I. Loss 2
-3.4
-3.6

-3.8
2040

2090

2140

2190

2240

Frequency (MHz)

-10
-12
-14
-16
dB

-18
-20
-22

R. Loss
Isolation

-24
-26
-28
-30
2140

2090

2140

2190

2240

Frequency (MHz)

97

Thin-Film Directional Couplers


DB0805 3dB 90 Couplers
2325 50MHz DB0805A2325ASTR
-3.0

-3.1

I. Loss 1

dB

-3.2

-3.3
I. Loss 2
-3.4

3
-3.5
2275

2300

2325

2350

2375

Frequency (MHz)

-10
-12
-14
-16

R. Loss

dB

-18

Isolation

-20
-22
-24
-26
-28
-30
2275

2300

2325
Frequency (MHz)

98

2350

2375

Thin-Film Directional Couplers


DB0805 3dB 90 Test Jigs
GENERAL DESCRIPTION
These jigs are designed for testing the DB0805 3dB 90
Couplers using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.254mm from the microstrips.
The substrate used is Neltecs NH9338ST0254C1BC.

The connectors are SMA type (female), Johnson Components


Inc. Product P/N: 142-0701-841.
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 SMA termination.

MEASUREMENT PROCEDURE
When measuring a component, it can be either soldered or
pressed using a non-metallic stick until all four ports touch
the appropriate pads. Set the VNA to the relevant frequency
band. Connect the VNA using a 10dB attenuator on the jig

terminal connected to port 2. Follow the VNAs instruction


manual and use the calibration jig to perform a full 2-port
calibration in the required bandwidths.

Place the coupler on the measurement jig as follows:


Input (Coupler)
50 (Coupler)

Connector 1 (Jig)
Connector 2 (Jig)

Output 1 (Coupler) Connector 3 (Jig)


Output 2 (Coupler) Connector 4 (Jig)

To measure R. Loss and I. Loss 1 connect:


Connector 1 (Jig) Port 1 (VNA) Connector 3 (Jig) Port 2 (VNA)
Connector 2 (Jig) 50
Connector 4 (Jig) 50

To measure R. Loss and I. Loss 2 connect:


Connector 1 (Jig) Port 1 (VNA) Connector 3 (Jig) 50
Connector 2 (Jig) 50
Connector 4 (Jig) Port 2 (VNA)

To measure Isolation connect:


Connector 1 (Jig) 50
Connector 2 (Jig) 50

Connector 3 (Jig) Port 1 (VNA)


Connector 4 (Jig) Port 2 (VNA)

Calibration Jig

Measurement Jig
Connector 1

Load &
Through
Connector
Johnson
P/N 142-0701-841

Connector 2
Load &
Through

Connector 4

Connector 3

Short Line
to GND
Open
Line

99

Thin-Film RF/Microwave
Harmonic Low Pass Filter
LP0402/LP0603/LP0805

100

Thin-Film Low Pass Filter


LP0402N Series Harmonic Lead-Free LGA Termination
RFAP TECHNOLOGY

APPLICATIONS

The LP0402N Series Harmonic Low Pass Filter is based on


the proprietary RFAP Thin-Film multilayer technology. The
technology provides a miniature part with excellent high
frequency performance and rugged construction for reliable
automatic assembly.
The RFAP Harmonic Low Pass Filter is offered in a variety of
frequency bands compatible with various types of high
frequency wireless systems.

Wireless communications
Wireless LANs
GPS
WiMAX

LAND GRID ARRAY ADVANTAGES

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation

HOW TO ORDER
LP

0402

XXXX

TR

Style

Size

Type

Frequency

Sub-Type

Termination

Taped & Reeled

MHz

LGA
Lead Free

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

LEAD-FREE COMPATIBLE
COMPONENT

TERMINATION
Nickel/Lead-Free solder coating compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.

101

Thin-Film Low Pass Filter


LP0402N Series Harmonic Lead-Free LGA Termination
TERMINALS (Top View)

DIMENSIONS: millimeters (inches)


(Bottom View)
S

B
A

IN

GND

OUT

GND

RECOMMENDED PAD LAYOUT (mm)

W
L
W
T

1.00.05
(0.0400.002)
0.580.04
(0.0230.002)
0.350.5
(0.0140.002)

A
B
S

0.30
(0.012)

0.200.06
(0.0080.002)
0.180.05
(0.0070.002)
0.050.05
(0.0020.002)

0.20
(0.008)
0.15
(0.006)

0.51
(0.020)

ELECTRICAL CHARACTERISTICS
(Guaranteed over 40C to +85C Operating Temperature Range)
P/N

Frequency Band
[MHz]

LP0402N2442ANTR

2400-2484

LP0402N2690ANTR

2640-2740

LP0402N3500ANTR

3400-3600

LP0402N5200ANTR

5500-5350

LP0402N5500ANTR

5350-5650

LP0402N5800ANTR

5600-6000

NOTE: Additional Frequencies Available Upon Request

102

I. Loss
[dB]
0.35 typ
0.5 max
0.35 typ
0.5 max
0.3 typ
0.5 max
0.2 typ
0.5 max
0.2 typ
0.5 max
0.2 typ
0.5 max

R. Loss
[dB]

Attenuation
@ 2xF0
[dB]

Attenuation
@ 3xF0
[dB]

20

30

17

20

30

20

19

30

20

19

30

20

15

30

16

25

Thin-Film Low Pass Filter


LP0402N Series Harmonic Lead-Free LGA Termination
LP0402N2442ANTR

LP0402N5800ANTR
0

0
-5

-5

F0

F0

-10

-10

-20

-20

S21
S11 -25
(dB)

S21
S11 -25
(dB)

3F0

-30

-30
-35

-35
-40

-40

2F0

-45
0

2F0

-45

10

12

Frequency (GHz)

10

12

14

16

Frequency (GHz)

LP0402N2690ANTR

LP0402N3500ANTR
0

0
F0

-10

F0

-10

S21 -20
S11

S21 -20
S11

3F0

(dB) -30
-40

3F0

(dB) -30
2F0

-40

2F0

-50

-50
0

10

12

14

Frequency (GHz)

10

12

14

Frequency (GHz)

LP0402N5500ANTR

LP0402N5200ANTR

-5

F0

-10

F0

-10

S21
S11 -25

-20

S21 -20
S11

(dB) -30

(dB) -30

-35

-40

-40

2F0

-45
0

Frequency (GHz)

10

2F0

-50
12

14

10

12

14

Frequency (GHz)

103

Thin-Film Low Pass Filter


LP0402N Series Harmonic Lead-Free LGA Termination Test Jig
TEST JIG FOR LP0402 LOW PASS FILTER
GENERAL DESCRIPTION

MEASUREMENT PROCEDURE

These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltecs NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), Johnson
Components Inc. Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 SMA termination.

Follow the VNAs instruction manual and use the calibration


jig to perform a full 2-Port calibration in the required bandwidths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter) GND (Jig)
(Filter)
Output
Connector 2 (Jig)
GND (Filter) GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).

Measurement

Connector 1

Calibration Jig

Short line to
GND

Open
line

4
Connector
Johnson
P/N 142-0701-841

Connector 2

104

Load &
Through

Load &
Through

Thin-Film Low Pass Filter


LP0603 Lead-Free LGA Type
GENERAL DESCRIPTION

APPLICATIONS

The LP0603 ITF (Integrated Thin Film) Lead-Free LGA Low


Pass Filter is based on thin-film multilayer technology. The
technology provides a miniature part with excellent high
frequency performance and rugged construction for reliable
automatic assembly.
The ITF Low Pass Filters are offered in a variety of frequency
bands compatible with various types of high frequency
wireless systems.

LAND GRID ARRAY ADVANTAGES

FEATURES
Miniature Size: 0603
Frequency Range: 900MHz-5.5HGz
Characteristic Impedance: 50 Ohm
Operating/Storage Temperature: -40C to +85C
Power Rating: 3W Continuous
Low Profile
Rugged Construction
Lead Free
Taped and Reeled

Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LANs
RFID

Inherent Low Profile


Self Alignment during Reflow
Excellent Solderability
Low Parasitics
Better Heat Dissipation

HOW TO ORDER
LP

0603

XXXX

TR

Style

Size

Type

Frequency

Sub-Type

Termination

Taped & Reeled

0603

A or N

MHz

LGA
**Ni/Lead Free Solder
**RoHS compliant

FINAL QUALITY INSPECTION


Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

LEAD-FREE COMPATIBLE
COMPONENT

TERMINATION
Nickel/Lead-Free Solder coating compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.

105

Thin-Film Low Pass Filter


LP0603 Lead-Free LGA Type
TERMINALS AND ORIENTATION IN TAPE
(Top View)

DIMENSIONS: millimeters (inches)


(Bottom View)
S

B
A

IN

GND

IN

GND

OUT

GND

OUT

GND

L
T

RECOMMENDED PAD LAYOUT (mm)

W
L
W
T

1.60.1
(0.0630.004)
0.840.1
(0.0330.004)
0.600.1
(0.0240.004)

A
B
S

0.250.05
(0.0100.002)
0.200.05
(0.0080.002)
0.050.05
(0.0020.002)

1.10
(0.043)
0.40
(0.016)
0.50
(0.020)

1.75 (0.069)

ELECTRICAL CHARACTERISTICS
(Guaranteed over 40C to +85C Operating Temperature Range)
P/N

Frequency
Band [MHz]

LP0603A0902ANTR

890-915

LP0603A0947ANTR

935-960

LP0603A1747ANTR

1710-1785

LP0603A1842ANTR

1805-1880

LP0603A1880ANTR

1840-1920

LP0603A1950ANTR

1920-1980

LP0603A2140ANTR

2110-2170

LP0603A2442ANTR

2412-2472

LP0603N3500ANTR

3400-3600

LP0603N5200ANTR

5050-5350

LP0603N5500ANTR

5350-5650

I. Loss
[dB]
0.35 typ
(0.5 max)
0.35 typ
(0.5 max)
0.3 typ
(0.5 max)
0.3 typ
(0.5 max)
0.3 typ
(0.5 max)
0.3 typ
(0.5 max)
0.3 typ
(0.5 max)
0.3 typ
(0.5 max)
-0.3 typ.
-0.5 max.
-0.2 typ.
-0.5 max.
-0.2 typ.
-0.5 max.

NOTE: Additional Frequencies Available Upon Request

106

VSWR
max
[dB]
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4

Attentuation
typ.
[dB]
25 @ 2xF0
14 @ 3xF0
25 @ 2xF0
17 @ 3xF0
25 @ 2xF0
17 @ 3xF0
27 @ 2xF0
15 @ 3xF0
25 @ 2xF0
17 @ 3xF0
27 @ 2xF0
15 @ 3xF0
27 @ 2xF0
17 @ 3xF0
25 @ 2xF0
17 @ 3xF0
30 @ 2xF0
20 @ 3xF0
30 @ 2xF0
20 @ 3xF0
30 @ 2xF0
20 @ 3xF0

Thin-Film Low Pass Filter


LP0603 Lead-Free LGA Type
LP0603A0902ANTR

LP0603A0947ANTR
0

F0

F0

-13

-13
3F0

S21
S11 -25
(dB)
2F0

-38

-50

3F0

S21
S11 -25
(dB)
2F0

-38

0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00

-50

0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00

Frequency (GHz)

Frequency (GHz)

LP0603A1747ANTR
0

LP0603A1842ANTR
0

F0

F0

-13

-13
3F0

S21
S11 -25
(dB)
-38

-50

-38

2F0

3F0

S21
S11 -25
(dB)

0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00

-50

0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00

Frequency (GHz)

Frequency (GHz)

LP0603A1880ANTR
0

LP0603A1950ANTR
0

F0

-5

F0

-10

-13

-15

S21 -20
S11 -25
(dB) -30

3F0

-35
-40

2F0

-45
-50

2F0

0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00

Frequency (GHz)

3F0

S21
S11 -25
(dB)
2F0

-38

-50

0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00

Frequency (GHz)

107

Thin-Film Low Pass Filter


LP0603 Lead-Free LGA Type
LP0603A2140ANTR

LP0603A2442ANTR
0

0
-5

-5

F0

-15

-15

S21 -20
S11 -25
(dB) -30

S21 -20
S11 -25
(dB) -30

3F0

-35

-35

-40

-40

2F0

-45
-50

F0

-10

-10

3F0

2F0

-45
-50

0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00

0 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00

Frequency (GHz)

Frequency (GHz)

LP0603N3500ANTR

LP0603N5200ANTR
0

0
F0

-5

-5

-15

-15

S21 -20
S11 -25

S21 -20
S11 -25

3F0

(dB) -30

(dB) -30

-35

-35
-40

2F0

-40

2F0

-45
-50

F0

-10

-10

-45

10

11

12

-50

13

LP0603N5500ANTR
0
-5

F0

-10
-15

S21 -20
S11 -25
(dB) -30
-35

2F0

-40
-45
-50

Frequency (GHz)

108

Frequency (GHz)

Frequency (GHz)

10

11

12

13

10

11

12

13

Thin-Film Low Pass Filter


LP0603 Lead-Free LGA Type Test Jig
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
GENERAL DESCRIPTION

MEASUREMENT PROCEDURE

These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltecs NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), Johnson
Components Inc. Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 SMA termination.

Follow the VNAs instruction manual and use the calibration


jig to perform a full 2-Port calibration in the required bandwidths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter) GND (Jig)
(Filter)
Output
Connector 2 (Jig)
GND (Filter) GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).

Measurement

Connector 1

Calibration Jig

Short line to
GND

Open
line

4
Connector
Johnson
P/N 152-0701-841

Connector 2

Load &
Through

Load &
OUT

109

Thin-Film Low Pass Filter


LP0805 Type Harmonic
DIMENSIONS: millimeters (inches)

GENERAL DESCRIPTION
The ITF (Integrated Thin-Film) SMD Filter is based on thin-film
multilayer technology. The technology provides a miniature
part with excellent high frequency performance and rugged
construction for reliable automatic assembly.
The ITF Filter is offered in a variety of frequency bands compatible with various types of high frequency wireless systems.

W
T
A
B

FEATURES

Small Size: 0805


Frequency Range: 800MHz - 3.5GHz
Characteristic Impedance: 50
Operating / Storage Temp.: -40C to +85C
Power Rating: 3W Continuous
Low Profile
Rugged Construction
Taped and Reeled

PAD LAYOUT
See CP0805 pad layout on page 64.

FINAL QUALITY INSPECTION


Finished parts are 100% tested for electrical parameters and
visual/mechanical characteristics. Each production lot is
evaluated on a sample basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR 4 hours

APPLICATIONS
Mobile Communications
Satellite TV Receivers
GPS
Vehicle Location Systems
Wireless LANs

TERMINATION
Nickel/Solder coating (Sn, Pb) compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.

HOW TO ORDER
LP

0805A

0902

Style

Size

Frequency

Low Pass

0805

MHz

AW

TR

Termination

Packaging Code

AW= Nickel/Solder (SnPb)


**AS = Nickel/ Lead Free
Solder (Sn100)

TR = Tape and Reel

Not RoHS Compliant

**RoHS compliant

LEAD-FREE COMPATIBLE
COMPONENT

TERMINALS AND LAYOUT (Top View)


Orientation in Tape
TYPE A

IN

For RoHS compliant products,


please select correct termination style.

TYPE D

GND

IN

TYPE E

GND

IN

TYPE F (Sn100)

GND

GND

IN

MARKING
CODE

2.030.1
(0.0800.004)
1.550.1
(0.0610.004)
1.020.1
(0.0400.004)
0.560.25
(0.0220.010)
0.350.15
(0.0140.006)

OUT

110

GND OUT

GND OUT

GND

OUT

GND

Thin-Film Low Pass Filter


LP0805 Type Harmonic
ELECTRICAL CHARACTERISTICS
Part
Number
LP0805A0897AS
LP0805A0942AS
LP0805A0902AS
LP0805A0947AS
LP0805A1119AS
LP0805A0836AS
LP0805A0881AS
LP0805A1747AS
LP0805A1842AS
LP0805A1880AS
LP0805A1960AS
LP0805A1907AS
LP0805A1890AS
LP0805A2150AS
LP0805A2442AS
LP0805A3500AS

Application
E-GSM
GSM
AMPS
PCN
PCS
PHP
DECT
3G
Wireless LAN
WLL

Frequency
Band (MHz)
880 - 915
925 - 960
890 - 915
935 - 960
1101 - 1137
824 - 849
869 - 894
1710 - 1785
1805 - 1880
1850 - 1910
1930 - 1990
1895 - 1920
1880 - 1900
1905 - 2180
2400 - 2484
3400 ~ 3600

I. Loss
max

VSWR
max

Attenuation
(dB) Typical

0.4dB
(0.3dB typ)

1.7

30 @ 2XFo
20 @ 3xFo

Layout Type
(SnPb)
A
A
A
A
A
A
A
D
D
D
D
D
D
D
D
E

Layout Type F
Marking Code
E
F
E
F
H
A
C
I
J
K
M
L
K
N
S
X

Typical Electrical Performance


Fo

Fo

-10

-20

3Fo

-40
2Fo

-50

-30

dB

dB

-30

-40

3Fo
2Fo

-50

0.5

1.5

2.5

3.5

0.5

1.5

3.5

-70
0

Fo

3Fo

-50
-60

3Fo

1.5

2.5

3.5

-70
0

LP0805A1950ASTR

-20

-70
0

10

dB

3Fo

-40
-50

2Fo

-60

-40

10

-30
3Fo

-40
2Fo

-50

Frequency (GHz)

-60
6

-70
0

10

Frequency (GHz)

10

11

12

13

Frequency (GHz)

LP0805A1119ASTR

LP0805A2150ASTR

0
Fo

-10

Fo

-10

-20

-20

-30

dB

3Fo

2Fo

-40
-50

-30

3Fo

-40
2Fo

-50

-60
-70

-20
3Fo

-30

-70
0

10

Fo

-10

-60
4

LP0805A3500ASTR

2Fo
3

-50

Frequency (GHz)

dB

-30

dB

dB

LP0805A2442ASTR

-10

2Fo

Fo

-20

-70
0

3Fo
-40

-60
4

0
Fo

-10

-30

Frequency (GHz)

Frequency (GHz)

3.5

-50
2Fo

-20

-40

-60

2.5

-10

-30

-50

Fo

Fo

dB

dB

2Fo

0.5

1.5

LP0805A1842ASTR

-20

-30

-70
0

-10

-40

0.5

Frequency (GHz)

-20
dB

2.5

LP0805A1747ASTR

LP0805A0967ASTR
0

2Fo

Frequency (GHz)

Frequency (GHz)

-10

3Fo

-40

-60

-70
0

-30

-50

-60

-60

Fo

-10

-20

-20
dB

-10

-70
0

LP0805A0902ASTR

LP0805A0881ASTR

LP0805A0836ASTR
0

-60
0

0.5

1.5

2.5

Frequency (GHz)

3.5

-70

10

Frequency (GHz)

111

Thin-Film Low Pass Filter


LP0805 Test Jig
ITF TEST JIG FOR LOW PASS FILTER 0805
GENERAL DESCRIPTION

MEASUREMENT PROCEDURE

These jigs are designed for testing the LPF0805 Low Pass
Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50W microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.254 mm from the microstrips.
The substrate used is RF-35-0100-C1B107 (or similar).
The connectors are SMA type (female), Johnson
Components Inc. Product P/N: 142-0701-841(or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50W SMA termination.

Follow the VNAs instruction manual and use the calibration


jig to perform a full 2-Port calibration in the required bandwidths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter) GND (Jig)
(Filter)
Output
Connector 2 (Jig)
GND (Filter) GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).

Measurement

Connector 1

Calibration Jig

Short line to
GND

Open
line

Connector
Johnson
P/N 142-0701-841

Connector 2

112

Load
Through

Load
Through

High Performance Low Pass Filter


LP1206A0700ANTR
ITF TECHNOLOGY
The ITF LGA Filter is based on thin-film multilayer technology. The
technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Filter is offered in a variety of frequency bands compatible
with various types of high frequency wireless systems.

HOW TO ORDER
LP 1206

XXXX

FEATURES

APPLICATIONS

Small size: 1206


Frequency: 700MHz
Characteristic impedance: 50
Operating/Storage temp: -40C to +85C
Low profile
Rugged construction
Taped and reeled
RoHS compliant

Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LANs

DIMENSIONS (Bottom View)


A

TR
B

Type

Frequency
(MHz)

SubType

Termination

mm (inches)

Taped &
Reeled

FINAL QUALITY INSPECTION


Finished parts are 100% tested for electrical parameters and visual/mechanical characteristics.
Each production lot is evaluated on a sample
basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

TERMINATION
Nickel/ Lead free Solder coating (Sn100)
compatible with automatic soldering technologies:
reflow, wave soldering, vapor phase and manual.

L
T

B
H, S

3.100.10
(0.1220.004)
1.600.10
(0.0630.004)
0.600.30
(0.0240.012)
0.390.10
0.0150.004
0.330.10
0.0130.004
0.050.05
(0.0020.002)

TERMINALS (Top View)


IN

GND
Orientation
Marking

OUT

GND

POWER RATING
3W RF Continuous

Recommended Pad Layout Dimensions

ORIENTATION IN TAPE

mm (inches)

0.80
(0.031)
0.70
(0.028)

IN

GND

OUT

GND

0.60
(0.024)

1.80
(0.071)

113

High Performance Low Pass Filter


LP1206A0700ANTR
TERMINALS (Top View)
Parameter
Fc
Rejection @ 900MHz
Insertion Loss
VSWR
Power Handling
Impedance
Operating Temp.
Size

Value
700
-35
0.9
2.3: 1
3
50
-40 to +85
1206

Unit
MHz
dB
dB

Notes
Min. (900MHz to 2GHz)
Max.
Max. (all ports)
Continuous

W
Ohm
C

TYPICAL ELECTRICAL PERFORMANCE


m1

m1: Frequency = 700.0MHz


S21 = -0.8dB

S11 (dB)
S21 (dB)

-10

m2: Frequency = 900.0MHz


S21 = -39.5dB

-20

-30
m2

-40

-50
0

0.4

0.6

0.8

1.0

1.2

1.4

Frequency (GHz)

114

1.6

1.8

2.0

2.2

High Performance Harmonic


Low Pass Filter
LP1206A0512BNTR
ITF TECHNOLOGY
The ITF LGA Filter is based on thin-film multilayer technology. The
technology provides a miniature part with excellent high frequency
performance and rugged construction for reliable automatic assembly.
The ITF Filter is offered in a variety of frequency bands compatible
with various types of high frequency wireless systems.

HOW TO ORDER
LP 1206

XXXX

FEATURES

APPLICATIONS

Small size: 1206


Frequency: 512MHz
Characteristic impedance: 50
Operating/Storage temp: -40C to +85C
Low profile
Rugged construction
Taped and reeled
RoHS compliant

Mobile communications
Satellite TV receivers
GPS
Vehicle location systems
Wireless LANs

DIMENSIONS (Bottom View)


B

TR
B

Type

Frequency
(MHz)

SubType

Termination

mm (inches)

Taped &
Reeled

FINAL QUALITY INSPECTION


Finished parts are 100% tested for electrical parameters and visual/mechanical characteristics.
Each production lot is evaluated on a sample
basis for:
Static Humidity: 85C, 85% RH, 160 hours
Endurance: 125C, IR, 4 hours

TERMINATION
Nickel/ Lead free Solder coating (Sn100)
compatible with automatic soldering technologies:
reflow, wave soldering, vapor phase and manual.

L
T

B
H, S

3.100.10
(0.1220.004)
1.600.10
(0.0630.004)
0.600.30
(0.0240.012)
0.390.10
0.0150.004
0.330.10
0.0130.004
0.050.05
(0.0020.002)

TERMINALS (Top View)


IN

GND
Orientation
Marking

OUT

GND

POWER RATING
3W RF Continuous

Recommended Pad Layout Dimensions

ORIENTATION IN TAPE

mm (inches)

0.80
(0.031)
0.70
(0.028)

IN

GND

OUT

GND

0.60
(0.024)

1.80
(0.071)

115

High Performance Harmonic


Low Pass Filter
LP1206A0512BNTR
TERMINALS (Top View)
Parameter
Fc
Rejection @ 900MHz
Insertion Loss
VSWR
Power Handling
Impedance
Operating Temp.
Size

Value
512
-35
0.8
2.3: 1
3
50
-40 to +85
1206

Unit
MHz
dB
dB

Notes
Min. (720MHz to 2GHz)
Max.
Max. (all ports)
Continuous

W
Ohm
C

TYPICAL ELECTRICAL PERFORMANCE


m1

S11 (dB)
S12 (dB)

-10

m1 freq = 512 MHz


S21 = -0.78 dB

-20

m2 freq = 720 MHz


S21 = -39 dB

-30

m2

-40
-50
-60
-70
-80
100

500

900

1300

1700

Frequency (MHz)

116

2100

2500

Thin-Film RF/Microwave
Products Designer Kits
Accu-P/Accu-L Kits

117

RF/Microwave Thin-Film Products


Designer Kits (Special Kits Available Upon Request)
Accu-P

Accu-P

Accu-P

Accu-P

Designer Kit Type 1700LF


Order Number: Accu-P 0201KITL2

Designer Kit Type 1800LF


Order Number: Accu-P 0201KITL3

Designer Kit Type 1300LF


Order Number: Accu-P 0402KITL1

Designer Kit Type 1400LF


Order Number: Accu-P 0402KITL2

Volts

100

50

25

16

Capacitors
Tolerance
Value (pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.7
5.6
6.8
7.5
8.2
10.0
12.0

P
P
P
P
P
P
P
P
P
P
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
G
G

600 Capacitors, 20 each of 30 values


Tolerance P = 0.02pF
A = 0.05pF
B = 0.1pF G = 2%

Volts

50

25

Capacitors
Tolerance
Value (pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.3
3.4
3.6
3.9
4.1
4.3
4.5
4.7

A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

600 Capacitors, 20 each of 30 values


Tolerance A = 0.05pF
B = 0.1pF

Volts

100

50

25
16

Capacitors
Tolerance
Value (pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0

P
P
P
P
P
P
P
P
P
P
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
G
G
G
G
G

600 Capacitors, 20 each of 30 values


Tolerance P = 0.02pF A = 0.05pF
B = 0.1pF G = 2%

Volts

100

50

Capacitors
Tolerance
Value (pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.3
3.4
3.6
3.9
4.1
4.3
4.5
4.7

A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

600 Capacitors, 20 each of 30 values


Tolerance A = 0.05pF
B = 0.1pF

Accu-P

Accu-P

Accu-P

Accu-P

Designer Kit Type 900LF


Order Number: Accu-P 0603KITL1

Designer Kit Type 800LF


Order Number: Accu-P 0805KITL2

Designer Kit Type 2800LF


Order Number: Accu-P 0201KITL5

Designer Kit Type 2700LF


Order Number: Accu-P 0402KITL4

Volts

5
100

50

25

Capacitors
Tolerance
Value (pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0

A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
G
G
G
G
G

600 Capacitors, 20 each of 30 values


Tolerance A = 0.05pF
B = 0.1pF
G = 2%

118

Volts

100

50

Capacitors
Tolerance
Value (pF)
0.1
0.2
0.3
0.4
0.5
0.7
0.8
0.9
1.0
1.2
1.5
1.8
2.0
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0

A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
G
G
G
G
G
J
J
J
J

300 Capacitors, 10 each of 30 values


Tolerance A = 0.05pF G = 2%
B = 0.1pF J = 5%

Volts

100

50

25

Capacitors
Tolerance
Value (pF)
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0

Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P

600 Capacitors, 20 each of 30 values


Tolerance Z = 0.01pF
P = 0.02pF

Volts

100

50

Capacitors
Tolerance
Value (pF)
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0

Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P

600 Capacitors, 20 each of 30 values


Tolerance Z = 0.01pF
P = 0.02pF

RF/Microwave Thin-Film Products


Designer Kits (Special Kits Available Upon Request)
Accu-P

Accu-P

Accu-P 01005

Designer Kit Type 2200LF


Order Number: Accu-P 0603KITL2

Designer Kit Type 700


Order Number: Accu-P 1210KIT02

Designer Kit Type 3100LF


Order Number: Accu-P C005KITL1

Volts

Capacitors
Tolerance
Value (pF)
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75

100

P
P
P
P
P
P
P
P
P
P
P
P
P
P
P

300 Capacitors, 20 each of 15 values


Tolerance P = 0.02pF

Accu-L 0201
Designer Kit Type 3200
Order Number: Accu-L 0201KIT1

Inductance
Value (nH)

Tolerance

0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3

A
A
A
A
A
A
A
A
B
B
B
B
B

260 Inductors, 20 each of 13 values


Tolerance A = 0.05nH
B = 0.1nH

Volts

Capacitors
Tolerance
Value (pF)
1.0
1.5
1.8
2.2
2.7
3.3
4.7
5.6
6.8
10.0
12.0
18.0
22.0
27.0
33.0

100

B
B
B
B
B
B
B
B
B
G
G
G
G
G
G

150 Capacitors, 10 each of 15 values


Tolerance B = 0.1pF
G = 2%

Volts

Capacitors
Tolerance
Value (pF)
0.05
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.5
1.8
2.2

16

P
P
P
P
P
P
P
P
P
P
Q
Q
Q
Q
Q

7500 Capacitors, 500 each of 15 values


Tolerance P = 0.02pF
Q = 0.03pF

Accu-L

Accu-L

Designer Kit Type 2500


Order Number: Accu-L L0402KIT01

Designer Kit Type 1600LF


Order Number: Accu-L 0603KITL2

Inductance
Value (nH)

Tolerance

0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8

A
A
A
A
A
A
A
B
B
B
B
B

240 Inductors, 20 each of 12 values


Tolerance A = 0.05nH
B = 0.1nH

Inductance
Value (nH)

Tolerance

1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15

C
C
C
C
C
C
C
C
C
C
C
G
G
G

280 Inductors, 20 each of 14 values


Tolerance C = 0.2nH
G = 2%

Accu-L
Designer Kit Type 1100LF
Order Number: Accu-L 0805KITL2

Inductance
Value (nH)

Tolerance

1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0

C
C
C
C
C
C
C
D
D
J
J
J
J
J

280 Inductors, 20 each of 14 values


Tolerance C = 0.2nH

D = 0.5nH
J = 5%

119

TM

Multilayer Organic (MLO )


Technology
MLOTM Capacitors
MLOTM Diplexers
MLOTM Inductors
MLOTM SMT Crossovers

120

Multi-Layer Organic Capacitors


Based on its patented multilayer low loss organic (MLOTM) technology. These new
capacitors represent a paradigm shift from traditional ceramic and thin film passive
SMD components. Multilayer Organic Capacitors (MLOC) are polymer based
capacitors that use high conductivity copper interconnects in a multilayer fashion.
The ability to fabricate these components on large area substrates and state of the
art laser direct imaging allow for improved cost benefits and tolerance control. The
end result is a state of the art low ESR and high SRF low profile RF capacitor that can
support frequencies well above one GHz. Additionally MLOCs are expansion
matched to printed circuit boards to allow for improved reliability.

FEATURES

APPLICATIONS

Low ESR
Hi-Q
High Self Resonance
Tight Tolerance
Low Dielectric Absorption
(0.0015%)

RF Power Amplifiers
Low Noise Amplifiers
Filter Networks
Instrumentation

HOW TO ORDER
ML

03

1R8

Case Size

Capacitance

03 = 0603

EIA Capacitance Code in pF.


First two digits = significant
figures or R for decimal
place.

Voltage
Code

AVX Style

5 = 50V
V = 250V
7 = 500V

2A
Packaging Code

Failure Rate
Code

2A = 7" Reel Unmarked

A = Not
Applicable

Third digit = number of zeros


or after R significant figures.

Capacitance
Tolerance Code

Temperature
Coefficient Code

P = 0.02 pF
A = .05 pF
B = .10 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%

1 = 030ppm
R
T

Termination Style
Code
T = Ni, Sin

LEAD-FREE COMPATIBLE
COMPONENT

MECHANICAL DIMENSIONS:

inches (millimeters)

Case

Length (L)

Width (W)

Thickness (T)

Band Width (B)

Castellation Radius (R)

0603

0.063 0.004
(1.600 0.102)

0.033 0.004
(0.838 0.102)

0.025 0.004
(0.635 0.102)

0.015 0.005
(0.381 0.127)

0.008 0.002
(0.203 0.051)

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).
8mm carrier
7" reel, 3,000 pcs per reel

121

Multi-Layer Organic Capacitors


ENVIRONMENTAL CHARACTERISTICS
TEST
Life (Endurance) MIL-STD-202F
Method 108A
Accelerated Damp Heat Steady
State MIL-STD-202F Method 103B
Temperature Cycling
MIL-STD-202F Method 107E
MIL-STD-883D Method 1010.7
Resistance to Solder Heat
IEC-68-2-58

CONDITIONS
125C, 2UR, 1000 hours
85C, 85% RH, UR, 1000 hours
55C to +125C, 15 cycles MLOTM

260C 5C for 10 secs.

REQUIREMENT
No visible damage C/C 2% for C5pF
C/C 0.25pF for C<5pF
No visible damage C/C 2% for C5pF
C/C 0.25pF for C<5pF
No visible damage C/C 2% for C5pF
C/C 0.25pF for C<5pF
C remains within initial limits

MECHANICAL SPECIFICATIONS
TEST
Solderability IEC-68-2-58
Leach Resistance IEC-68-2-58

Adhesion MIL-STD-202F
Method 211A
Termination Bond Strength
IEC-68-2-21 Amend. 2
Robustness of Termination
IEC-68-2-21 Amend. 2
Storage

CONDITIONS
Components completely immersed in
a solder bath at 235C for 2 secs.
Components completely immersed in
a solder bath at 2605C for 60 secs.
A force of 5N applied for 10 secs.
Tested as shown in diagram
A force of 5N applied for 10 secs.
12 months minimum with components
stored in as received packaging

QUALITY & RELIABILITY


TM

MLO capacitors utilize high density interconnect wiring


technology on well established low loss organic materials.

REQUIREMENT
Terminations to be well tinned, minimum 95%
coverage
Dissolution of termination faces 15% of area
Dissolution of termination edges 25% of
length
No visible damage
No visible damage C/C 2% for C5pF
C/C 0.25pF for C<5pF
No visible damage
Good solderability

Solderability;
Dimensional, mechanical and temperature stability.

QUALITY ASSURANCE
FINAL QUALITY INSPECTION

Finished parts are tested for standard electrical parameters


and visual/mechanical characteristics. Each production lot
is 100% evaluated for: capacitance and proof voltage at
2.5 UR. In addition, production is periodically evaluated for:
Average capacitance with histogram printout for
capacitance distribution;
IR and Breakdown Voltage distribution;
Temperature Coefficient;

The reliability of these multilayer organic capacitors has


been extensively studied. Various methods and standards
have been used to ensure a high quality component
including JEDEC, Mil Spec and IPC testing. AVXs quality
assurance policy is based on well established international
industry standards. The reliability of the capacitors is
determined by accelerated testing under the following
conditions:
Life (Endurance)
Accelerated Damp
Heat Steady State

125C, 2UR, 1000 hours


85C, 85% RH, UR,
1000 hours.

TABLE I: CASE SIZE ML03


Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2

122

Cap. Tol.
P, A, B
P, A, B
P, A, B
P, A, B
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C

WVDC
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500

Cap. pF
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.5
2.7

Cap. Tol.
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C

WVDC
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250, 500
50, 250

Cap. pF
3.0
3.3
3.6
3.9

Cap. Tol.
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C

WVDC
50, 250
50, 250
50, 250
50, 250

Multi-Layer Organic Capacitors


TypicalESR
ESRvs.
vs.Frequency
Frequency
Typical
OPC TM
0603
MLO
0603
10.00

0.4 pF

1.00

Ohm

0.7 pF
0.9 pF
1.4 pF
1.7 pF

0.10

2.2 pF

0.01
0.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

1.60

1.80

2.00

GHz

Typical Q vs. Frequency


MLOTM 0603
10000

1000
2.5 pF

100

2.0 pF
1.5 pF

1.0pF

10

0.5pF

0.1
-1

10

Frequency (GHz)

123

Multi-Layer Organic Capacitors


Typical
Self Self
Resonant
Frequency
vs. Capacitance
Typical
Resonant
Frequency
vs Capacitance
TM
MLOOPC
0603
0603

GHz

1000

10

1
0.1

pF

124

10

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0603 diplexer is a best in class low profile


multilayer organic passive device that is based
on AVXs patented multilayer organic high density
interconnect technology. The MLO diplexer
uses high dielectric constant and low loss
materials to realize high Q passive printed
elements such as inductors, and capacitors in a
multilayer stack up. The MLO diplexers can
support multiple wireless standards such as
WCDMA, CDMA, WLAN, GSM, and BT. These
diplexers are less than 0.5mm in height and are
ideally suited for band switching for dual band
systems. All diplexers are expansion matched to
printed circuit boards thereby resulting in
improved reliability vs. ceramic and Si
components.

Multiband applications including


WiFi, WiMax, GPS, and cellular
bands

5425

TR

Design

Size

Inherent Low Profile


Excellent Solderability
Low Parasitics
High Heat Dissipation

Bottom
View
Bottom
View

Frequency
(MHz)

Finish
7 = Au
T = NiSn

Packaging
Tape & Reel

0.880.20
(0.0350.008)

0.040.04
(0.0020.002)
0.060.10

1.280.20 0.460.10
(0.0500.008)(0.0180.004)

(0.0020.004)

0.250.10
(0.0100.004)

0.610.05
0.950.05
(0.0240.002)

(0.0370.002)

QUALITY INSPECTION

0.510.05
(0.0200.002)

Finished parts are 100% tested for electrical parameters


and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni Au, Ni Sn and OSP coatings
which are compatible with automatic soldering
technologies which include reflow, wave soldering, vapor
phase and manual.

ORIENTATION IN TAPE

0.200.10
(0.0080.004)

Terminal No.
1
2
3
4
5
6

Unit: mm (inches)

PART NUMBER: DP03B54257TR


Electrical Characteristics @ 25C

Mechanical Characteristics @ 25C

Unit: mm (inches)

Terminal Name
GND
Common
GND
Low Frequency Port
GND
High Frequency Port

4.5W Maximum

0.450.10

(0.0180.004)
0.550.10
(0.0220.004)

0.440.10
0.450.10
(0.0170.004)
(0.0180.004)

1.650.20
2.120.20
(0.0650.008)
(0.0830.008)

POWER CAPACITY

0.150.02
(0.0060.001)

No. Parameter
1
Insertion
Loss
2
3
Attenuation
4
6
7 Attenuation
8
9
Isolation
10
11
VSWR
12
VSWR
13
VSWR
14
VSWR

Top View

Side
View
Side
View

0.640.05
0.230.10
(0.0090.004)
(0.0250.002)

0.200.10 0.300.10
(0.0120.004)
(0.0080.004)

Type

COMPONENT DIMENSIONS AND FUNCTIONS

HOW TO ORDER
DP 03

LAND GRID ARRAY


ADVANTAGES

Freq. (MHz)
2400-2496
4900-5950
500-2700
9800-11900
4800-4992
4900-5950
7200-7500
500-2700
4900-5950
2400-2500
4900-5950
2400-2500
4900-5950

Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)

Port
Low
High
High
High
Low
Low
Low
Low-High
Low-High
Ant
Ant
Low
High

Specification
0.55 max
1.2 max
28 min
10 min
20 min
23 min
26 min
28 min
22 min
2.0 max
2.0 max
2.0 max
2.0 max

Typ. value
0.40
0.80
35
14
25
27
30
35
25
1.5
1.3
1.5
1.3

Unit
dB
dB
dB
dB
dB
dB
dB
dB
dB
-

1.65 x 0.88 (0.065 x 0.035)


0.42 (0.017)
0.77

125

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
S PARAMETER MEASUREMENTS
LOW BAND PORT ATTENUATION

HIGH BAND PORT ATTENUATION

Low Band Attenuation

High Band Attenuation

Frequency
4.800 GHz
4.992 GHz
4.900 GHz
5.400 GHz
5.590 GHz
7.200 GHz
7.488 GHz

Frequency
0.500 GHz
2.400 GHz
2.450 GHz
2.496 GHz
2.700 GHz
9.800 GHz
11.90 GHz

Attenuation
25.302
29.935
27.471
32.647
26.099
34.531
26.860

LOW BAND INSERTION LOSS

Attenuation
35.133
39.019
41.406
42.793
31.607
13.967
28.352

HIGH BAND INSERTION LOSS

Low Band Insertion Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz

126

Insertion Loss
0.404
0.418
0.420

High Band Insertion Loss


Frequency
4.900 GHz
5.400 GHz
5.950 GHz

Insertion Loss
0.909
0.577
0.562

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
S PARAMETER MEASUREMENTS
COMMON PORT RETURN LOSS

ISOLATION

Common Return Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz
4.900 GHz
5.400 GHz
5.950 GHz

Return Loss
14.066
14.162
14.325
12.750
24.603
21.310

Isolation
VSWR
1.494
1.487
1.476
1.599
1.125
1.188

LOW BAND RETURN LOSS

Frequency
0.500 GHz
1.550 GHz
2.400 GHz
2.450 GHz
2.496 GHz
2.700 GHz
4.900 GHz
5.400 GHz
5.950 GHz

Attenuation
32.253
28.144
28.913
43.562
52.470
31.566
27.731
34.304
26.249

HIGH BAND RETURN LOSS

Low Band Return Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz

Return Loss
14.232
14.429
14.572

VSWR
1.482
1.469
1.459

High Band Return Loss


Frequency
4.900 GHz
5.400 GHz
5.950 GHz

Return Loss
12.587
27.577
22.533

VSWR
1.087
1.161

127

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0603 diplexer is a best in class low profile


multilayer organic passive device that is based
on AVXs patented multilayer organic high density
interconnect technology. The MLO diplexer
uses high dielectric constant and low loss
materials to realize high Q passive printed
elements such as inductors, and capacitors in a
multilayer stack up. The MLO diplexers can
support multiple wireless standards such as
WCDMA, CDMA, WLAN, GSM, and BT. These
diplexers are less than 0.5mm in height and are
ideally suited for band switching for dual band
systems. All diplexers are expansion matched to
printed circuit boards thereby resulting in
improved reliability vs. ceramic and Si
components.

Multiband applications including


WiFi, WiMax, GPS, and cellular
bands

5425

TR

Design

Size

Inherent Low Profile


Excellent Solderability
Low Parasitics
High Heat Dissipation

Bottom
View
Bottom
View

Frequency
(MHz)

Finish
7 = Au
T = NiSn

Packaging
Tape & Reel

0.880.20
(0.0350.008)

0.040.04
(0.0020.002)
0.060.10

1.280.20 0.460.10
(0.0500.008)(0.0180.004)

(0.0020.004)

0.250.10
(0.0100.004)

0.610.05
0.950.05
(0.0240.002)

(0.0370.002)

QUALITY INSPECTION

0.510.05
(0.0200.002)

Finished parts are 100% tested for electrical parameters


and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni Au, Ni Sn and OSP coatings
which are compatible with automatic soldering
technologies which include reflow, wave soldering, vapor
phase and manual.

0.200.10
(0.0080.004)

Side
View
Side
View

0.640.05
0.230.10
(0.0090.004)
(0.0250.002)

0.200.10 0.300.10
(0.0120.004)
(0.0080.004)

Type

COMPONENT DIMENSIONS AND FUNCTIONS

HOW TO ORDER
DP 03

LAND GRID ARRAY


ADVANTAGES

0.150.02
(0.0060.001)

1.650.20
2.120.20
(0.0650.008)
(0.0830.008)

Terminal No.
1
2
3
4
5
6

0.450.10

(0.0180.004)
0.550.10
(0.0220.004)

0.440.10
0.450.10
(0.0170.004)
(0.0180.004)

Unit: mm (inches)

Unit: mm (inches)

Terminal Name
Low Frequency Port
GND
High Frequency Port
GND
Common
GND

PART NUMBER: DP03A54257TR


Electrical Characteristics @ 25C

ORIENTATION IN TAPE

POWER CAPACITY

No. Parameter
1
Insertion
Loss
2
3
Attenuation
4
6
7 Attenuation
8
9
Isolation
10
11
VSWR
12
VSWR
13
VSWR
14
VSWR

4.5W Maximum

Mechanical Characteristics @ 25C

Top View

Freq. (MHz)
2400-2496
4900-5950
500-2700
9800-11900
4800-4992
4900-5950
7200-7500
500-2700
4900-5950
2400-2500
4900-5950
2400-2500
4900-5950

Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)

128

Port
Low
High
High
High
Low
Low
Low
Low-High
Low-High
Ant
Ant
Low
High

Specification
0.55 max
1.2 max
28 min
10 min
20 min
23 min
26 min
28 min
22 min
2.0 max
2.0 max
2.0 max
2.0 max

Typ. value
0.40
0.80
35
14
25
27
30
35
25
1.5
1.3
1.5
1.3

Unit
dB
dB
dB
dB
dB
dB
dB
dB
dB
-

1.65 x 0.88 (0.065 x 0.035)


0.42 (0.017)
0.77

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
S PARAMETER MEASUREMENTS
LOW BAND PORT ATTENUATION

HIGH BAND PORT ATTENUATION

Low Band Attenuation

High Band Attenuation

Frequency
4.800 GHz
4.992 GHz
4.900 GHz
5.400 GHz
5.590 GHz
7.200 GHz
7.488 GHz

Frequency
0.500 GHz
2.400 GHz
2.450 GHz
2.496 GHz
2.700 GHz
9.800 GHz
11.90 GHz

Attenuation
25.302
29.935
27.471
32.647
26.099
34.531
26.860

LOW BAND INSERTION LOSS

Attenuation
35.133
39.019
41.406
42.793
31.607
13.967
28.352

HIGH BAND INSERTION LOSS

Low Band Insertion Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz

Insertion Loss
0.404
0.418
0.420

High Band Insertion Loss


Frequency
4.900 GHz
5.400 GHz
5.950 GHz

Insertion Loss
0.909
0.577
0.562

129

Multilayer Organic (MLOTM)


0603 WLAN/BT Diplexer
S PARAMETER MEASUREMENTS
COMMON PORT RETURN LOSS

ISOLATION

Common Return Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz
4.900 GHz
5.400 GHz
5.950 GHz

Return Loss
14.066
14.162
14.325
12.750
24.603
21.310

Isolation
VSWR
1.494
1.487
1.476
1.599
1.125
1.188

LOW BAND RETURN LOSS

Frequency
0.500 GHz
1.550 GHz
2.400 GHz
2.450 GHz
2.496 GHz
2.700 GHz
4.900 GHz
5.400 GHz
5.950 GHz

Attenuation
32.253
28.144
28.913
43.562
52.470
31.566
27.731
34.304
26.249

HIGH BAND RETURN LOSS

Low Band Return Loss


Frequency
2.400 GHz
2.450 GHz
2.496 GHz

130

Return Loss
14.232
14.429
14.572

VSWR
1.482
1.469
1.459

High Band Return Loss


Frequency
4.900 GHz
5.400 GHz
5.950 GHz

Return Loss
12.587
27.577
22.533

VSWR
1.087
1.161

Multilayer Organic (MLOTM)


0805 CDMA Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0805 diplexer is a best in class low profile


multilayer organic passive device that is based
on AVXs patented multilayer organic high
density interconnect technology. The MLOTM
diplexer uses high dielectric constant and low
loss materials to realize high Q passive printed
passive elements such as inductors and
capacitors in a multilayer stack up. The MLOTM
diplexers can support multiple wireless
standards such as WCDMA, CDMA, WLAN,
and GSM and are less than 0.6mm in
thickness. These components are ideally
suited for band switching for dual band
systems. All diplexers are expansion matched
to FR4 thereby resulting in improved reliability
over standard Si and ceramic devices.

Multiband applications including WCDMA,


WLAN, WiMax, GPS, and cellular bands

HOW TO ORDER
DP 05
Type

Size

1920

TR

Design

Frequency
(MHz)

Finish
7 = Au
T = NiSn

Packaging
Tape & Reel
TR = 3 Kpcs
TR/500 = 500 pcs

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters
and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni/Sn, Immersion Sn, Immersion Au
and OSP coatings which are compatible with automatic
soldering technologies which include reflow, wave
soldering, vapor phase and manual.

Low Insertion Loss


Excellent Solderability
Low Parasitics
Low Profile

Bottom View

Side View
0.640.05
(0.0250.002)

0.200.10
(0.0080.004)

0.040.04
(0.0020.002)

1.280.20
(0.0500.008)

0.250.10
(0.0100.004)

0.950.05
(0.0370.002)

0.200.10
(0.0080.004)
2.120.20
(0.0830.008)

Terminal No.
1
2
3
4
5
6

0.550.10
(0.0220.004)

0.440.10
(0.0170.004)

Unit: mm (inches)

Terminal Name
High Frequency Port
GND
Low Frequency Port
GND
Common Port
GND

PART NUMBER: DP05A19207TR

ORIENTATION IN TAPE
Top View

4.5W Maximum

COMPONENT DIMENSIONS AND FUNCTIONS

POWER CAPACITY

LAND GRID ARRAY


ADVANTAGES

Specification @ 25C
Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)
Frequency Range (F1) (MHz)
Frequency Range (F2) (MHz)
Insertion Loss (F1, at Fc) (dB)
Insertion Loss (F2, at Fc) (dB)
Attenuation (F1) at (F2) (dB)
Attenuation (F2) at (F1) (dB)
VSWR (Input @ F1)
VSWR (Input @ F2)
VSWR (Lowband @ F1)
VSWR (Highband @ F2)

6
2.12 x 1.28 (0.083 x 0.050)
0.55 (0.021)
1.5
85935
192070
-0.4
-0.6
-23
-23
1.4
1.3
1.4
1.4

131

Multilayer Organic (MLOTM)


0805 CDMA Diplexer
S PARAMETER MEASUREMENTS
0

0
-5

-5

-15
-20
-25
-30

-15
-20
-25

Return Loss

-30

Return Loss

-35
0.4 0.6

High Band

-10
dB(S(1,1)
dB(S(2,1)

dB(S(1,1)
dB(S(3,1)

-10

Low Band

-35
0.8 1.0

1.2 1.4

1.6 1.8 2.0

2.2

-40
0.4 0.6

2.4 2.6

0.8 1.0

1.2 1.4

freq, GHz

1.6 1.8 2.0

2.2

2.4 2.6

freq, GHz

-12
-14
-16
dB(S(2,3))

-18
-20
-22
-24
-26

Isolation

-28
-30
-32
0.4 0.6

0.8 1.0

1.2 1.4

1.6 1.8 2.0

2.2

2.4 2.6

freq, GHz

Note: Measurements were taken using an Anritsu 4 port VNA; Diplexer was mounted on a custom evaluation board. To reduce systematic errors from the VNA, the coaxial
measurement cables, and evaluation board, a Short-Open-Load-Thru (SOLT) calibration was performed, using a custom fabricated calibration substrate. This is the most
common coaxial calibration methods.

132

Multilayer Organic (MLOTM)


0805 WCDMA Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0805 diplexer is a best in class low profile


multilayer organic passive device that is based
on AVXs patented multilayer organic high
density interconnect technology. The MLOTM
diplexer uses high dielectric constant and low
loss materials to realize high Q passive printed
passive elements such as inductors and
capacitors in a multilayer stack up. The MLOTM
diplexers can support multiple wireless
standards such as WCDMA, CDMA, WLAN,
and GSM and are less than 0.6mm in
thickness. These components are ideally
suited for band switching for dual band
systems. All diplexers are expansion matched
to FR4 thereby resulting in improved reliability
over standard Si and ceramic devices.

Multiband applications including WCDMA,


WLAN, WiMax, GPS, and cellular bands

Type

1940

Design

Size

Frequency
(MHz)

7
Finish
7 = Au
T = NiSn

TR
Packaging
Tape & Reel
TR = 3 Kpcs
TR/500 = 500 pcs

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters
and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni/Sn, Immersion Sn, Immersion Au
and OSP coatings which are compatible with automatic
soldering technologies which include reflow, wave
soldering, vapor phase and manual.

Top View

5
4

POWER CAPACITY
4.5W Maximum

Low Insertion Loss


Excellent Solderability
Low Parasitics
Low Profile

Bottom View
0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

3
0.040.04
(0.0020.002)

1.280.20
(0.0500.008)

0.250.10
(0.0100.004)

0.950.05
(0.0370.002)

0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

Side View
0.640.05
(0.0250.002)

2.120.20
(0.0830.008)

Terminal No.
1
2
3
4
5
6

0.550.10
(0.0220.004)

0.440.10
0.440.10
(0.0170.004)
(0.0170.004)

Unit: mm (inches)

Terminal Name
High Frequency Port
GND
Low Frequency Port
GND
Common Port
GND

PART NUMBER: DP05A19407TR

ORIENTATION IN TAPE

COMPONENT DIMENSIONS AND FUNCTIONS

HOW TO ORDER
DP 05

LAND GRID ARRAY


ADVANTAGES

Specification @ 25C
Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)
Frequency Range (F1) (MHz)
Frequency Range (F2) (MHz)
Insertion Loss (F1, at Fc) (dB)
Insertion Loss (F2, at Fc) (dB)
Attenuation (F1) at (F2) (dB)
Attenuation (F2) at (F1) (dB)
VSWR (Input @ F1)
VSWR (Input @ F2)
VSWR (Lowband @ F1)
VSWR (Highband @ F2)

6
2.12 x 1.28 (0.083 x 0.050)
0.55 (0.021)
1.5
89268
1940230
-0.4
-0.65
-23
-20
1.3
1.4
1.4
1.2

133

Multilayer Organic (MLOTM)


0805 WCDMA Diplexer
S PARAMETER MEASUREMENTS
0

-5

dB(S(1.1)
dB(S(2.1)

dB(S(1.1)
dB(S(3.1)

-10

-10

-15
-20
-25
-30

High Band

Low Band

0.8 1.0

-30
-40

Return Loss

-50

Return Loss

-35
0.4 0.6

-20

1.2 1.4

1.6

1.8 2.0

2.2

-60
0.4 0.6

2.4 2.6

0.8 1.0

1.2 1.4

freq, GHz

1.6

1.8 2.0

2.2

2.4 2.6

freq, GHz

-5

dB(S(2.3))

-10
-15
-20

Isolation

-25
-30
-35
0.4 0.6

0.8 1.0

1.2 1.4

1.6

1.8 2.0

2.2

2.4 2.6

freq, GHz

Note: Measurements were taken using an Anritsu 4 port VNA; Diplexer was mounted on a custom evaluation board. To reduce systematic errors from the VNA, the coaxial
measurement cables, and evaluation board, a Short-Open-Load-Thru (SOLT) calibration was performed, using a custom fabricated calibration substrate. This is the most
common coaxial calibration methods.

134

Multilayer Organic (MLOTM)


0805 WLAN Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0805 diplexer is a best in class low


profile multilayer organic passive device
that is based on AVXs patented multilayer
organic high density interconnect
technology. The MLOTM diplexer uses high
dielectric constant and low loss materials
to realize high Q passive printed elements
such as inductors and capacitors in a
multilayer stack up. The MLOTM diplexers
can support multiple wireless standards
such as WCDMA, CDMA, WLAN and
GSM. These components which are less
than 0.6mm in thickness are ideally suited
for band switching for dual band systems.
All diplexers are expansion matched to
FR4 thereby resulting in improved reliability
over standard Si and ceramic devices.

Multiband applications including WiFi,


WiMax, GPS, and cellular bands

Type

Size

5250

TR

Design

Frequency
(MHz)

Finish
7 = Au
T = NiSn

Packaging
Tape & Reel
TR = 3 Kpcs
TR/500 = 500 pcs

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters
and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni/Sn, Immersion Sn, Immersion Au
and OSP coatings which are compatible with automatic
soldering technologies which include reflow, wave
soldering, vapor phase and manual.

ORIENTATION IN TAPE
Top View

POWER CAPACITY
4.5W Maximum

Low Insertion Loss


Excellent Solderability
Low Parasitics
Low Profile

COMPONENT DIMENSIONS AND FUNCTIONS

HOW TO ORDER
DP 05

LAND GRID ARRAY


ADVANTAGES

Bottom View
0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

3
0.040.04
(0.0020.002)

1.280.20
(0.0500.008)

0.250.10
(0.0100.004)

0.950.05
(0.0370.002)

0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

Side View
0.640.05
(0.0250.002)

2.120.20
(0.0830.008)

Terminal No.
1
2
3
4
5
6

0.550.10
(0.0220.004)

0.440.10
0.440.10
(0.0170.004)
(0.0170.004)

Unit: mm (inches)

Terminal Name
High Frequency Port
GND
Low Frequency Port
GND
Common Port
GND

PART NUMBER: DP05A52507TR


Specification @ 25C
Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)
Frequency Range (F1) (MHz)
Frequency Range (F2) (MHz)
Insertion Loss (F1) (dB)
Insertion Loss (F2) (dB)
Attenuation (F1) at (F2) (dB)
Attenuation (F2) at (F1) (dB)
Return Loss (Lowband @ F1) (dB)
Return Loss (Highband @ F2) (dB)
Isolation (Lowband @ F1) (dB)
Isolation (Highband @ F2) (dB)

2.12 x 1.28 (0.083 x 0.050)


0.55 (0.021)
1.5
245050
5250100
-0.5
-0.5
-20
-20
-12
-12
-25
-21

135

Multilayer Organic (MLOTM)


0805 WLAN Diplexer
S PARAMETER MEASUREMENTS
0
-5

0
Low Band

-5

-15

-10
dB_S11
dB_S31

dB_S11
dB_S21

-10
Return Loss

-15

-20

-20

-25

-25

-30
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

-30
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

freq, GHz

dB_S23

-10
-15
-20
Isolation
-25
-30
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
freq, GHz

136

Return Loss

freq, GHz

-5

High Band

Multilayer Organic (MLOTM)


0805 WLAN/BT Diplexer
MLOTM TECHNOLOGY

APPLICATIONS

The 0805 MLO diplexer is best in class low


profile multilayer organic passive device that
is based on AVXs patented multilayer organic
high density interconnect technology. The
MLOTM diplexer uses high dielectric constant
and low loss materials to realize high Q
passive printed elements such as inductors
and capacitors in a multilayer stack up. The
MLOTM diplexers can support multiple wireless
standards such as WCDMA, CDMA, WLAN
and GSM. These components which are less
than 0.5mm in thickness are ideally suited for
band switching for dual band systems. All
MLOTM diplexers are expansion matched to
FR4 thereby resulting in improved reliability
over standard Si and ceramic devices.

Multiband applications including WiFi, BT,


WiMax, GPS, and cellular bands

TM

Type

5425

Design

Size

Frequency
(MHz)

7
Finish
7 = Au
T = NiSn

TR
Packaging
Tape & Reel
TR = 3 Kpcs
TR/500 = 500 pcs

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters
and visual characteristics.

OPERATING TEMPERATURE
-40C to +85C

TERMINATION
Finishes available in Ni/Sn, Immersion Sn, Immersion Au
and OSP coatings which are compatible with automatic
soldering technologies which include reflow, wave
soldering, vapor phase and manual.

ORIENTATION IN TAPE
Top View

POWER CAPACITY
4.5W Maximum

Low Insertion Loss


Excellent Solderability
Low Parasitics
Matched CTE to PCB

COMPONENT DIMENSIONS AND FUNCTIONS

HOW TO ORDER
DP 05

LAND GRID ARRAY


ADVANTAGES

Bottom View
0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

3
0.040.04
(0.0020.002)

1.280.20
(0.0500.008)

0.250.10
(0.0100.004)

0.950.05
(0.0370.002)

0.200.10
0.200.10
(0.0080.004)
(0.0080.004)

Side View
0.640.05
(0.0250.002)

2.120.20
(0.0830.008)

Terminal No.
1
2
3
4
5
6

0.550.10
(0.0220.004)

0.440.10
0.440.10
(0.0170.004)
(0.0170.004)

Unit: mm (inches)

Terminal Name
Low Frequency Port
GND
High Frequency Port
GND
Common Port
GND

PART NUMBER: DP05B54257TR


Specification @ 25C
Size [mm(inches)]
Height [mm(inches)]
Volume (mm^3)
Pass Band Range (F1) (MHz)
Pass Band Range (F2) (MHz)
Insertion Loss (F1) (dB)
Insertion Loss (F2) (dB)
Attenuation (F1)
4800MHz - 6000MHz (dB)
Attenuation 3 x (F1) (dB)
Attenuation (F2)
1800MHz - 2500MHz (dB)
Attenuation 2 x (F2) (dB)
Attenuation 3 x (F2) (dB)
VSWR (Input @ F1)
VSWR (Input @ F2)
VSWR (Lowband @ F1)
VSWR (Highband @ F2)

2.12 x 1.28 (0.083 x 0.050)


0.55 (0.021)
1.5
2450 +/-50MHz
5425 +/-525MHz
-0.5
-1.0
-36
-31
-26
-13
-15
1.2
1.7
1.2
1.7

137

Multilayer Organic (MLOTM)


0805 WLAN/BT Diplexer
S PARAMETER MEASUREMENTS
4.95 GHz
-1.218 dB

5.45 GHz
-0.6133 dB

5.95 GHz
-1.178 dB

0
10.8 GHz
-17.255 dB

-10
2.5 GHz
-0.454 dB

-20
16.30 GHz
-23.06 dB

-30
dB

11.95 GHz
-16.991 dB

-40
1.8 GHz
-25.611 dB

7.5 GHz
-24.673 dB

2.5 GHz
-28.013

-50
-60
4.8 GHz
-69.659 dB

High Band
Low Band
Return Loss

-70
-80
5.E+08

3.E+09

5.E+09

7.E+09

9.E+09

1.E+10

Frequency (0.5 - 17GHz)

138

1.E+10

1.E+10

1.E+10

Multilayer Organic (MLOTM)


AUTOMATED SMT ASSEMBLY
Stencil thickness and aperture openings should be adjusted
according to the optimal solder volume. The following are
general recommendations for SMT mounting of MLOTM
devices onto the PCB.

The following section describes the guidelines for automated


SMT assembly of MLOTM RF devices which are typically Land
Grid Array (LGA) packages or side termination SMT pacages.
Control of solder and solder paste volume is critical for
surface mount assembly of MLOTM RF devices onto the PCB.

SMT REFLOW PROFILE


may be required to improve the out-gassing of solder paste.
In addition, the reflow profile depends on the PCB density
and the type of solder paste used. Standard no-clean solder
paste is generally recommended. If another type of flux is
used, complete removal of flux residual may be necessary.
Example of a typical lead free reflow profile is shown below.

Common IR or convection reflow SMT processes shall be


used for the assembly. Standard SMT reflow profiles, for
eutectic and Pb free solders, can be used to surface mount
the MLOTM devices onto the PCB. In all cases, a temperature
gradient of 3C/sec, or less, should be maintained to prevent
warpage of the package and to ensure that all joints reflow
properly. Additional soak time and slower preheating time

tp

Tp

Critical Zone
TL to Tp

Ramp-up

Temperature

TL

tL

Ts max
Ts min

Ramp-down

ts
Preheat

25

t 25C to Peak

Time
Figure A. Typical Lead Free Profile and Parameters

Profile Parameter
Ramp-up rate (Tsmax to Tp
Preheat temperature (Ts min to Ts max)
Preheat time (ts)
Time above TL, 217C (tL)
Peak temperature (Tp)
Time within 5C of peak temperature (tp)
Ramp-down rate
Time 25C to peak temperature

Pb free, Convection, IR/Convection


3C/second max.
150C to 200C
60 180 seconds
60 120 seconds
260C
10 20 seconds
4C/second max.
6 minutes max.

139

MLOTM Tight Tolerance Inductors


The Multilayer Organic Tight Tolerance Inductor is a low profile organic
based inductor that can support mobile communications, satellite applications, GPS, matching networks, and collision avoidance. The MLOTM
Tight Tolerance Inductor series of components are based on AVXs
patented multilayer organic technology (US patent 6,987,307). MLOTM
Tight Tolerance Inductors incorporate very low loss organic materials
which allow for high Q and high stability over frequency. MLOTM Tight
Tolerance Inductors are surface mountable and are expansion matched to
FR4 printed wiring boards. MLOTM Tight Tolerance Inductors utilize fine line
high density interconnect technology thereby allowing for tight tolerance
control and high repeatability. Reliability testing is performed to JEDEC
and mil standards. Finishes are available in RoHS compliant Sn.

APPLICATIONS

FEATURES

Mobile communications
Satellite Applications
GPS
Collision Avoidance
Wireless LANs

SURFACE MOUNT
ADVANTAGES

Tight Tolerance
High Frequency
High Withstanding Voltage
Low DC Resistance
Surface Mountable
0402 Case Size
RoHS Compliant Finishes
Available in Tape and Reel

Inherent Low Profile


Excellent Solderability
Low Parasitics
Better Heat Dissipation
Expansion Matched to PCB

HOW TO ORDER

HL

02

XXX

TR

Style
Tight
Tolerance

Size
02 = 0402

Inductance
Expressed in nH
(2 significant digits + number of zeros)
for values <10nH,
letter R denotes decimal point.
Example:
22nH = 220
4.7nH = 4R7

Tolerance
A = 0.05nH
B = 0.1nH
G = 2%

Termination
Sn100

Packaging
5000pcs
T&R

DIMENSIONS

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics.

R
T

TERMINATION
RoHS compliant Sn finish.

L
W

OPERATING TEMPERATURE
mm (inches)

1.000.10
(0.0400.004)

0.580.075
(0.0230.003)

0.350.10
(0.0140.004)

0.1250.050
(0.0050.002)

140

-55C to +125C

MLOTM Tight Tolerance Inductors


0402 ELECTRICAL SPECIFICATIONS
L (nH)
450MHz
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
30
32

Available
Inductance Tolerance
A = 0.05nH, B = 0.1nH
G = 2%
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.05nH, 0.1nH
0.1nH
0.1nH
0.1nH
0.1nH
2%
2%
2%
2%
2%
2%
2%
2%

Q
450MHz

Idc max
(mA)

Rdc max
(m)

SRF min
(GHz)

15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15

450
450
420
410
410
295
295
230
295
230
230
230
230
200
200
180
180
170
150
140
115
105
95
95
85
75
75
65
65

100
100
100
100
110
13
150
150
160
18
200
200
250
300
340
350
400
480
500
600
800
1000
1100
1200
1500
1900
2100
2200
2200

7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
6
5
4
4
3
3
3
2
2

Specifications based on performance of component assembled properly on printed circuit board with 50 nominal impedance.

141

MLOTM High Current Inductors


The Multilayer Organic High Current Inductor is a low profile organic
based inductor that can support mobile communications, satellite
applications, GPS, matching networks, and collision avoidance. Based on
AVXs patented multilayer organic technology (US patent 6,987,307), the
0402 size Multilayer Organic High Current Inductor allows for much higher
current handling over similar multilayer ceramic chip inductors, a 50%
average increase in current handling over comparable thin film products
with similar Q, and current handling approaching that of wire wound
ceramic chip inductors. MLOTM High Current Inductors incorporate very
low loss organic materials which allow for high Q and high stability over
frequency. They are surface mountable and are expansion matched to
FR4 printed wiring boards. MLOTM High Current Inductors utilize fine line
high density interconnect technology thereby allowing for tight tolerance
control and high repeatability. Reliability testing is performed to JEDEC
and mil standards. Finishes are available in RoHS compliant Sn.

APPLICATIONS

FEATURES

Mobile communications
Satellite Applications
GPS
Collision Avoidance
Wireless LANs

SURFACE MOUNT
ADVANTAGES

High Q
High SRF
High Frequency
High Current Handling
Low DC Resistance
Surface Mountable
0402 Case Size
RoHS Compliant Finishes
Available in Tape and Reel

Inherent Low Profile


Excellent Solderability
Low Parasitics
Better Heat Dissipation
Expansion Matched to PCB

HOW TO ORDER

HLC

02

XXX

TR

Type
HLC = High Current

Size
02 = 0402

Inductance
Expressed in nH
(2 significant digits + number of zeros)
for values <10nH,
letter R denotes decimal point.
Example:
22nH = 220
4.7nH = 4R7

Tolerance
B = 0.1nH
C = 0.2nH
D = 0.5nH
G = 2%
H = 3%.
J = 5%

Termination
Sn100

Packaging
5000pcs T&R

DIMENSIONS

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics.

R
T

TERMINATION
RoHS compliant Sn finish.

L
W

OPERATING TEMPERATURE
mm (inches)

1.000.10
(0.0400.004)

0.580.075
(0.0230.003)

0.350.10
(0.0140.004)

0.1250.050
(0.0050.002)

142

-55C to +125C

MLOTM High Current Inductors


0402 ELECTRICAL SPECIFICATIONS

L (nH)
450 MHz
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
30
32

450 MHz
Test Frequency
Available
Inductance Tolerance
B = 0.1nH, C = 0.2nH
D = 0.5nH, G = 2%
H = 3%, J = 5%
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
0.1nH, 0.2nH, 0.5nH
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%

900 MHz
Test Frequency

1900 MHz
Test Frequency

Q
450 MHz

L (nH)
900 MHz

Q
900 MHz

L (nH)
1900 MHz

Q
1900 MHz

30
26
25
24
24
25
25
25
25
26
27
27
27
27
27
27
28
29
30
30
29
30
32
32
28
30
29
28
28

0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.7
5.7
6.9
8.4
10.3
12.5
15.9
19.4
24.0
30.5
34.0
37.7

42
36
34
33
33
34
35
35
35
35
36
37
36
36
36
37
38
39
40
39
37
38
40
38
32
34
30
27
27

0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.7
4.0
4.9
6.0
7.5
9.4
12.0
15.7
22.3
31.1
44.7
n/a
n/a
n/a

55
47
45
43
44
44
45
45
45
45
46
47
46
44
44
45
46
45
44
41
37
35
31
24
15
11
n/a
n/a
n/a

2400 MHz
Test Frequency
L (nH)
Q
2400 MHz 2400 MHz
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.1
2.2
2.4
2.7
3.1
3.4
3.8
4.1
5.1
6.3
8.0
10.4
13.9
19.8
33.0
60.0
n/a
n/a
n/a
n/a

61
52
50
48
48
49
50
49
49
49
50
50
48
46
46
46
47
44
42
37
31
27
19
9
0.3
n/a
n/a
n/a
n/a

SRF Min
(GHz)

Rdc Max
(m)

Idc Max
(mA)

>20
>20
>20
20
20
19
19
18
18
17
16
15
14
12
11
10
10
9
8
7
6
5
4
4
3
3
3
2
2

100
100
100
100
110
130
150
150
160
180
200
200
250
300
340
350
400
480
500
600
800
1000
1100
1200
1500
1900
2100
2200
2200

875
835
800
782
751
725
679
660
626
596
571
549
521
497
476
457
441
405
375
343
315
290
265
240
210
202
184
180
175

Specifications based on performance of component assembled properly on printed circuit board with 50 nominal impedance.
Idc max: Maximum 15C rise in component temperature over ambient.

143

MLOTM Hi-Q Inductors


The Multilayer Organic Hi-Q Inductor is a low profile organic based
inductor that can support mobile communications, satellite applications,
GPS, matching networks, and collision avoidance. The MLOTM Hi-Q
Inductor series of components are based on AVXs patented multilayer
organic technology (US patent 6,987,307 and 7,439,840). MLOTM Hi-Q
Inductors incorporate very low loss organic materials and low profile
copper which allow for high Q and high stability over frequency. MLOTM HiQ Inductors are surface mountable and are expansion matched to FR4
printed wiring boards. MLOTM Hi-Q Inductors utilize fine line high density
interconnect technology thereby allowing for tight tolerance control and
high repeatability. Reliability testing is performed to JEDEC and mil
standards. Finishes are available in RoHS compliant Sn.

APPLICATIONS

FEATURES

Mobile communications
Satellite Applications
GPS
Collision Avoidance
Wireless LANs

SURFACE MOUNT
ADVANTAGES

High Q
High SRF
High Frequency
Low DC Resistance
Surface Mountable
0402 Case Size
RoHS Compliant Finishes
Available in Tape and Reel

Inherent Low Profile


Excellent Solderability
Low Parasitics
Better Heat Dissipation
Expansion Matched to PCB

HOW TO ORDER

HLQ

02

XXX

TR

Type
HLQ = High Q

Size
02 = 0402

Inductance
Expressed in nH
(2 significant digits + number of zeros)
for values <10nH,
letter R denotes decimal point.
Example:
22nH = 220
4.7nH = 4R7

Tolerance
B = 0.1nH
C = 0.2nH
H = 3%

Termination
Sn100

Packaging
5000pcs T&R

DIMENSIONS

QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics.

R
T

TERMINATION
RoHS compliant Sn finish.

L
W

OPERATING TEMPERATURE
mm (inches)

1.000.10
(0.0400.004)

0.580.075
(0.0230.003)

0.350.10
(0.0140.004)

0.1250.050
(0.0050.002)

144

-55C to +125C

MLOTM Hi-Q Inductors


0402 ELECTRICAL SPECIFICATIONS
L (nH)
450MHz
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
30
32

Available
Inductance Tolerance
B = 0.1nH, C = 0.2nH
H = 3%
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
0.1nH, 0.2nH
3%
3%
3%
3%
3%
3%
3%
3%
3%
3%

Q min
450MHz

SRF min
(GHz)

Rdc max
(m)

Idc max
(mA)

17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17

7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
6
5
4
4
3
3
3
2
2

100
100
100
100
110
130
150
150
160
180
200
200
250
300
340
350
400
480
500
600
800
1000
1100
1200
1500
1900
2100
2200
2200

350
350
330
330
330
330
330
300
300
245
245
245
245
225
225
200
200
195
170
160
130
120
110
110
110
95
95
85
85

Specifications based on performance of component assembled properly on printed circuit board with 50 nominal impedance.
Idc max: Maximum 15C rise in component temperature over ambient.

145

MLOTM Inductors
MLOTM INDUCTOR PERFORMANCE CHARACTERISTICS
Typical Performance: 2.0nH
Max Q
53

50

SRF
10.85

40

50

30
20

40

10
0

30

-10
20

-20

Inductance @
450MHz 2.0nH

10

-30

Inductance (nH)

60

-40
-50

0
2

10

12

Frequency (GHz)

45

SRF
5.65

40
35

30
25
20
15

Inductance @
450MHz 4.7nH

10
5
0
0

10

120
100
80
60
40
20
0
-20
-40
-60
-80
-100
12

Inductance (nH)

Typical Performance: 4.7nH


Max Q
45

50

Frequency (GHz)

Typical Performance: 18.2nH

400

SRF
2.38

40

300

Max Q
32

35

200

30

100

25

20
-100

15

Inductance @
450MHz 18.2nH

10

-200
-300

-400

0
0

0.5

1.5

2.5

Frequency (GHz)

146

3.5

Inductance (nH)

45

MLOTM Inductors
AUTOMATED SMT ASSEMBLY
Stencil thickness and aperture openings should be adjusted
according to the optimal solder volume. The following are
general recommendations for SMT mounting of MLOTM
devices onto the PCB.

The following section describes the guidelines for automated


SMT assembly of MLOTM RF devices which are typically Land
Grid Array (LGA) packages or side termination SMT packages.
Control of solder and solder paste volume is critical for
surface mount assembly of MLOTM RF devices onto the PCB.

SMT REFLOW PROFILE


may be required to improve the out-gassing of solder paste.
In addition, the reflow profile depends on the PCB density
and the type of solder paste used. Standard no-clean solder
paste is generally recommended. If another type of flux is
used, complete removal of flux residual may be necessary.
Example of a typical lead free reflow profile is shown below.

Common IR or convection reflow SMT processes shall be


used for the assembly. Standard SMT reflow profiles, for
eutectic and Pb free solders, can be used to surface mount
the MLOTM devices onto the PCB. In all cases, a temperature
gradient of 3C/sec, or less, should be maintained to prevent
warpage of the package and to ensure that all joints reflow
properly. Additional soak time and slower preheating time

tp

Tp

Critical Zone
TL to Tp

Ramp-up

Temperature

TL

tL

Ts max
Ts min

Ramp-down

ts
Preheat

25

t 25C to Peak

Time
Figure A. Typical Lead Free Profile and Parameters

Profile Parameter
Ramp-up rate (Tsmax to Tp
Preheat temperature (Ts min to Ts max)
Preheat time (ts)
Time above TL, 217C (tL)
Peak temperature (Tp)
Time within 5C of peak temperature (tp)
Ramp-down rate
Time 25C to peak temperature

Pb free, Convection, IR/Convection


3C/second max.
150C to 200C
60 180 seconds
60 120 seconds
260C
10 20 seconds
4C/second max.
6 minutes max.

147

MLOTM RF-DC SMT Crossover


GENERAL DESCRIPTION
The MLOTM SMT RF-DC Crossover is a very low profile crossover that intersects an
RF and DC circuit trace in an SMT package. The RF-DC Crossover is a low cost
solution for applications where a critical RF circuit trace intersects a DC circuit precluding the need for an expensive multilayer printed circuit board. The SMT package can support frequencies up to 6 GHz. MLOTM crossovers have been subjected
to JEDEC reliability standards and 100% electrically tested. The RF-DC crossovers
are available in NiSn.

FEATURES

APPLICATIONS

DC 6.0 GHz
RF DC Crossover
Low Loss
DC Isolation
Surface Mountable
Tape and Reel
100% Tested

Mobile communications
GPS
Vehicle location systems
Wireless LANs

LAND GRID ARRAY


ADVANTAGES

TOP VIEW

Inherent Low Profile


Excellent Solderability
Low Parasitics
Better Heat Dissipation

HOW TO ORDER
X2A

2020

RFDC

Series

Size

Type

Packaging
T = 1000pcs T&R
T/250 = 250pcs T&R
B = Bulk

Port
Impedance
(ohms)
50
50
50

Ins.
Loss
(dB max)
0.05
0.10
0.15

Frequency
(GHz)
DC -2.5
2.5 4.0
4.0 6.0

Return Loss
(dB min)

Power
(Watts)

JC
(C /Watts)

20
20
15

30
19
9

140
140
140

Operating
Temperature
(C)
-55 to +85
-55 to +85
-55 to +85

* Specification based on performance of component assembled properly on printed circuit board with 50 nominal impedance.

QUALITY INSPECTION

TERMINATION

Finished parts are 100% tested for electrical


parameters and visual characteristics.

NiSn compatible with automatic soldering


technologies: Pb free reflow, wave soldering, vapor
phase and manual.

148

OPERATING
TEMPERATURE
- 55C to +85C

MLOTM RF-DC SMT Crossover


MECHANICAL OUTLINE
TOP

BOTTOM
RF IN/OUT

RF IN/OUT
4.98 0.25
(0.196 0.010)

0.40 0.04
(0.016 0.002)

1.12 0.10
(0.044 0.004)

GND

GND

GND

GND

0.74 0.10 X4
(0.029 0.004 X4)
4.98 0.25
(0.196 0.010)

GND

GND

GND

GND

0.99 0.20 X4 SQ
(0.039 0.008 X4 SQ)

RF IN/OUT

0.76 0.10 X4
(0.030 0.004 X4)

RF IN/OUT

SIDE

0.40 0.04
(0.016 0.002)

X4)

149

MLOTM RF-DC SMT Crossover


RF-DC SMT CROSSOVER PERFORMANCE: 0.3 GHZ TO 6 GHZ
RF/DC Crossover
Crossover Insertion
Insertion Loss
Loss
RF/DC
0.0

Insertion Loss (dB)

-0.1

-0.2

-0.3

-0.4

-0.5
0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

Frequency (GHz)

RF/DC
RF/DCCrossover
CrossoverReturn
ReturnLoss
Loss
-10-

Return Loss (dB)

-20

-30

-40

-50

-60
0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

Frequency (GHz)

MOUNTING PROCEDURE

MOUNTING FOOTPRINT

MLOTM SMT crossovers require 50


transmission lines leading to and from all of the
RF ports. Proper grounding is required in order
to ensure optimal device performance. If these
conditions are not met then performance
parameters including insertion loss, return loss
and any isolation may not meet published
values. All of the MLOTM components utilize
castellated interconnects which allow for high
yield assembly, expansion matched and
halogen free dielectric. When mounting the
user must be mindful of the following: a) ensure
the RF pads of the device are in contact with
the circuit trace of the printed circuit board and
b) the ground plane of neither the component
nor the PCB is in contact with the RF signal.
Parts are specifically oriented in the tape and
reel.

To ensure proper
electrical and thermal
performance there must
be a ground plane with
100% solder connection
underneath the part.

150

3.75
(0.148)
1.60 SQ TYP
(0.063)

Multiple
plated thru holes
to ground

50
Transmission
Line

0.86 TYP
(0.034)
DC Line

Dimensions are in mm (inches)

MLOTM RF-RF SMT Crossover


GENERAL DESCRIPTION
The MLOTM SMT RF-RF Crossover is a very low profile crossover that intersects an
RF and RF circuit trace in an SMT package. The RF-RF Crossover is a low cost
solution for applications where a critical RF circuit trace intersects a RF circuit
precluding the need for an expensive multilayer printed circuit board. The SMT
package can support frequencies up to 6 GHz. MLOTM crossovers have been
subjected to JEDEC reliability standards and 100% electrically tested. The RF-RF
crossovers are available in NiSn.

FEATURES

APPLICATIONS

DC 6.0 GHz
RF RF Crossover
Low Loss
High Isolation
Surface Mountable
Tape and Reel
100% Tested

Mobile communications
GPS
Vehicle location systems
Wireless LANs

TOP VIEW

LAND GRID ARRAY


ADVANTAGES

Inherent Low Profile


Excellent Solderability
Low Parasitics
Better Heat Dissipation

HOW TO ORDER
X2B

2020

RFRF

Series

Size

Type

Packaging
T = 1000pcs T&R
T/250 = 250pcs T&R
B = Bulk

Frequency
(GHz)
DC -2.5
2.5 4.0
4.0 6.0

Port
Impedance
(ohms)
50
50
50

Ins.
Loss
(dB max)
0.05
0.10
0.15

Return Loss
(dB min)

Isolation
(dB min)

Power
(Watts)

JC
(C /Watts)

20
18
10

50
30
20

30
19
9

150
150
150

Operating
Temperature
(C)
-55 to +85
-55 to +85
-55 to +85

* Specification based on performance of component assembled properly on printed circuit board with 50 nominal impedance.

QUALITY INSPECTION

TERMINATION

Finished parts are 100% tested for electrical


parameters and visual characteristics.

NiSn compatible with automatic soldering


technologies: Pb free reflow, wave soldering, vapor
phase and manual.

OPERATING
TEMPERATURE
- 55C to +85C

151

MLOTM RF-RF SMT Crossover


MECHANICAL OUTLINE
0.552 (0.022)
0.740
(0.029)

TOP

0.552 (0.022)

0.210
(0.008)

0.740
(0.029)

BOTTOM

0.750 (0.030)

2.49 (0.098)

4.978
(0.196)

0.750 (0.030)

2.49 (0.098)

0.462 x 4
(0.018 x 4)

3.50
(0.138)

2.409
(0.095)

0.564 x 4
(0.022 x 4)

0.462 x 4
(0.018 x 4)

0.750 (0.030)
4.126 (0.162)

0.739
(0.029)

2.214 (0.087)

0.750 (0.030)
4.126 (0.162)
2.214 (0.087)

2.490 (0.098)

2.490 (0.098)

2.866 (0.106)

2.866 (0.106)

4.978 (0.196)

4.978 (0.196)

SIDE

0.40 0.04
(0.016 0.002)

D
4
X4)

6
N/OUT
D

152

3.00
(0.118)

4.978
(0.196)

0.564 x 4
(0.022 x 4)

0.462 x 4
(0.018 x 4)

3.50
(0.138)
3.00
(0.118)

0.739
(0.029)

0.210
(0.008)

0.462 x 4
(0.018 x 4)

MLOTM RF-RF SMT Crossover


RF-RF SMT CROSSOVER PERFORMANCE: 0.3 GHZ TO 6 GHZ
RF/RF Crossover Return Loss

0.02

-10

-0.02

-20

-30

-0.07

Return Loss 2 (dB)


Return Loss 1 (dB)

Insertion Loss 2 (dB)


Insertion Loss 1 (dB)

RF/RF Crossover Insertion Loss

-0.12

-40

-50

-0.17
-60

-0.22
0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

-70

6.0

0.5

1.0

1.5

2.0

2.5

Frequency (GHz)

RF/RF Crossover Isolation

3.5

4.0

4.5

5.0

5.5

6.0

RF/RF Crossover Phase Balance

-20

-30

-40

Phase Balance (C)

Isolation (dB)

3.0

Frequency (GHz)

-50

-60

-70

-2

-4

-80
0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

-6
0.5

1.0

1.5

2.0

2.5

Frequency (GHz)

3.0

3.5

4.0

4.5

5.0

5.5

6.0

Frequency (GHz)

MOUNTING PROCEDURE

MOUNTING FOOTPRINT

MLOTM SMT crossovers require 50


transmission lines leading to and from
all of the RF ports. Proper grounding is
required in order to ensure optimal
device performance. If these conditions
are not met then performance
parameters including insertion loss,
return loss and any isolation may not
meet published values. All of the MLOTM
components
utilize
castellated
interconnects which allow for high yield
assembly, expansion matched and
halogen free dielectric. When mounting
the user must be mindful of the
following: a) ensure the RF pads of the
device are in contact with the circuit
trace of the printed circuit board and b)
the ground plane of neither the
component nor the PCB is in contact
with the RF signal. Parts are specifically
oriented in the tape and reel.

To ensure proper electrical and thermal performance there must be a ground plane
with 100% solder connection underneath the part.
1.60 8Q TYP
(0.063)

Multiple
plated thru holes
to ground

4 x 50
Transmission
Line

TYP
034)

0.86 TYP
(0.034)

1.07 TYP
(0.042)

Dimensions are in mm (inches)

153

MLOTM SMT Crossover


AUTOMATED SMT ASSEMBLY
surface mount assembly of MLOTM RF devices onto the PCB.
Stencil thickness and aperture openings should be adjusted
according to the optimal solder volume. The following are
general recommendations for SMT mounting of MLOTM
devices onto the PCB.

The following section describes the guidelines for automated


SMT assembly of MLOTM RF devices which are typically
Land Grid Array (LGA) packages or side termination
SMT packages.
Control of solder and solder paste volume is critical for

SMT REFLOW PROFILE


may be required to improve the out-gassing of solder paste.
In addition, the reflow profile depends on the PCB density
and the type of solder paste used. Standard no-clean solder
paste is generally recommended. If another type of flux is
used, complete removal of flux residual may be necessary.
Example of a typical lead free reflow profile is shown below:

Common IR or convection reflow SMT processes shall be


used for the assembly. Standard SMT reflow profiles, for
eutectic and Pb free solders, can be used to surface mount
the MLOTM devices onto the PCB. In all cases, a temperature
gradient of 3C/sec, or less, should be maintained to prevent
warpage of the package and to ensure that all joints reflow
properly. Additional soak time and slower preheating time

tp

Tp

Critical Zone
TL to Tp

Ramp-up

Temperature

TL

tL

Ts max
Ts min

Ramp-down

ts
Preheat

25

t 25C to Peak

Time
Profile Parameter
Ramp-up rate (Tsmax to Tp)
Preheat temperature (Ts min to Ts max)
Preheat time (ts)
Time above TL, 217C (tL)
Peak temperature (Tp)
Time within 5C of peak temperature (tp)
Ramp-down rate
Time 25C to peak temperature

154

Pb free, Convection, IR/Convection


3C/second max.
150C to 200C
60 180 seconds
60 120 seconds
260C
10 20 seconds
4C/second max.
6 minutes max.

RF Inductors
AL Series - Air Core Inductors
AS Series - Square Air Core Inductors
LCWC - Wire Wound Chip Inductors

155

Air Core RF Inductors


AL Series
GENERAL DESCRIPTION
AVX Air Core RF Inductors, part of the wound air core inductor family, are
ideal for RF circuits, broadband I/O filtering, frequency selection, or
impedance matching. The air core inductor provides better performance
over solid core inductors with higher Q, and better current handling
capabilities.

FEATURES

APPLICATIONS

Air Core Construction


High Q
High Current
Excellent SRF
Many inductance values ranging
from 1.65nH to 538nH

RF Applications
RF Circuits
Broadband I/O Filtering
Impedance Matching/Tuning
Decoupling/Bypassing

HOW TO ORDER
AL

05A

02N5

Air Core Inductor

Size
Size
05A = 0605
05B = 0605
12A = 1212
12B = 1212
016 = 1516
023 = 2523

Inductance
02N5 = 2.5nH
12N5 = 12.5nH
130N = 130nH

Tolerance
G = 2%
J = 5%
K = 10%

Termination
T = Sn/Ag over Cu
(96.5% Sn, 3% Ag,
0.5% Cu)

R
Packaging
R = 7" reel
S = 13" reel*
*AL016 & AL023 Only

ELECTRICAL SPECIFICATIONS
Technical Data
Inductance Range
Inductance Tolerance
Rated Current
Operating Temperature
Termination

156

All technical data related to an ambient temperature of +25C


1.65nH to 538nH
2%, 5%, 10%
1.5A to 4.0A
-40C to +125C
96.5% Tin/3% Silver over 0.5% Copper

Air Core RF Inductors


AL Series
ELECTRICAL SPECIFICATIONS
AVX P/N

Turns

AL05A1N65KTR
AL05A2N55*TR
AL05A3N85*TR
AL05A5N45*TR
AL05B05N6*TR
AL05B7N15*TR
AL05B08N8*TR
AL05B9N85*TR
AL05B12N5*TR
AL12A02N5KTR
AL12A05N0*TR
AL12A08N0*TR
AL12A12N5*TR
AL12A18N5*TR
AL12B17N5*TR
AL12B22N0*TR
AL12B28N0*TR
AL12B35N5*TR
AL12B43N0*TR
AL01622N0*TS
AL01627N0*TS
AL01633N0*TS
AL01639N0*TS
AL01647N0*TS
AL01656N0*TS
AL01668N0*TS
AL01682N0*TS
AL016100N*TS
AL016120N*TS
AL02390N0*TS
AL023111N*TS
AL023130N*TS
AL023169N*TS
AL023206N*TS
AL023222N*TS
AL023246N*TS
AL023307N*TS
AL023380N*TS
AL023422N*TS
AL023491N*TS
AL023538N*TS

2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
4
5
5
6
6
7
7
8
9
9
9
10
11
12
13
14
15
16
17
18
19
20

Inductance
(nH)
1.65
2.55
3.85
5.45
5.6
7.15
8.8
9.85
12.55
2.5
5
8
12.5
18.5
17.5
22
28
35.5
43
22
27
33
39
47
56
68
82
100
120
90
111
130
169
206
222
246
307
380
422
491
538

Tolerance
(%)
K
J, K
G, J, K
G, J
G, J
G, J
G, J
G, J
G, J
K
J, K
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J
G, J

Q
min.
100
100
100
100
100
100
100
100
100
145
140
140
137
132
100
102
105
112
106
100
100
100
100
100
100
100
100
100
100
95
87
87
95
95
92
95
95
95
95
95
87

Q
typ.
135
135
130
135
135
125
120
120
115
125
114
104
104
114
114
110
114
114
114
114
114
104

Test Freq.
(MHz)
800
800
800
800
800
800
800
800
800
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50

DCR max
(m)
4
5
6
8
9
10
12
13
14
1.1
1.8
2.6
3.4
3.9
4.5
5.2
6
6.8
7.9
4.2
4
4.8
4.4
5.6
6.2
8.2
9.4
12.3
17.3
15
15
20
25
30
35
35
35
50
60
65
90

SRF
GHz (min.)
10
8.2
7.5
7
6.5
6
6
5.2
4.6
12.5
6.5
5
3.3
2.5
2.2
2.1
1.8
1.5
1.2
3.2
2.7
2.5
2.1
2.1
1.5
1.5
1.3
1.2
1.1
1.140
1.020
0.900
0.875
0.800
0.730
0.685
0.660
0.590
0.540
0.535
0.490

Ir max
Amps
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
3.00
3.50
3.00
3.00
3.00
3.00
2.50
2.50
1.70
1.50
3.50
3.50
3.00
3.00
3.00
3.00
3.00
3.00
2.50
2.50
2.00
2.00

*Tolerance: G= 2%, J: 5%, K: 10%


a. Test Equipment:
L/Q: HP-4291B With HP16193A test fixture or equivalent.
SRF: HP8753E /HP8720D or equivalent.
RDC: Chroma 16502 or equivalent.
b. Operating temperature range: -40C to +125C.
c. For Temperature Rise: 15C
d. Storage Temp.: -40C to +85C.
f. MSL: Level 1

157

Air Core RF Inductors


AL Series
PHYSICAL DIMENSIONS
AL12A, AL12B, AL016, AL023

Tinned Length

SIDE

END

TOP

180

30

AL05A, AL05B
SIDE

END

TOP
F

D
180

Measure Line 0
C

30

Co-Plane 0.10 (0.004)

TINNED LENGTH BETWEEN 30 AND 180

mm (inches)
Part Number
AL05A
AL05B
AL12A
AL12B
AL016
AL023

A
1.42 0.13
(0.056 0.005)
1.42 0.13
(0.056 0.005)
3.05 max.
(0.120 max.)
3.05 max.
(0.120 max.)
3.81
(0.150)
6.35 max.
(0.250 max.)

B
1.37 0.15
(0.056 0.005)
1.37 0.15
(0.056 0.005)
3.18 max.
(0.125 max.)
3.18 max.
(0.125 max.)
4.20 max.
(0.165 max.)
5.90 max.
(0.232 max.)

C
0.89 0.25
(0.035 0.010)
0.89 0.25
(0.035 0.010)
0.58 0.38
(0.023 .0.015)
0.58 0.38
(0.023 0.015)
1.53 0.39
(0.060 0.015)
1.02 0.39
(0.040 0.015)

D
2.21 0.25
(0.087 0.010)
4.04 0.30
(0.159 0.012)
3.68 max.
(0.145 max.)
6.86 max.
(0.270 max.)
4.83 max.
(0.190 max.)
10.55 max.
(0.415 max.)

E
1.83 0.25
(0.072 0.010)
3.66 0.30
(0.144 0.012)
2.92 0.25
(0.115 0.010)
5.84 0.25
(0.230 0.010)
4.32 0.39
(0.170 0.015)
7.98 0.51
(0.314 0.020)

F
0.51 max.
(0.200 max.)
0.51 max.
0.200 max.

G
0.35 min.
(0.014 min.)
0.35 min.
0.014 min.

RECOMMENDED LAND PATTERNS


mm (inches)
Part Number
AL05A
AL05B

AL12A
AL12B
AL016
AL023

158

A
2.62
(0.103)
4.45
(0.175)
4.19
(0.165)
7.24
(0.285)
5.80
(0.228)
10.0
(0.394)

B
2.46
(0.097)
2.46
(0.097)
3.30
(0.130)
3.30
(0.130)
5.16
(0.203)
4.70
(0.185)

C
1.04
(0.041)
2.87
(0.113)
1.65
(0.065)
4.70
(0.185)
2.85
(0.112)
5.95
(0.234)

D
1.02
(0.040)
1.02
(0.040)
2.79
(0.110)
2.79
(0.110)
2.62
(0.103)
2.42
(0.095)

E
0.79
(0.031)
0.79
(0.031)
1.27
(0.050)
1.27
(0.050)
1.48
(0.058)
2.04
(0.080)

b
c
a

Air Core RF Inductors


AL Series
PERFORMANCE SPECIFICATIONS
AL05A
Typical Q vs. Frequency

200

150
Q

Inductance (nH)

Inductance vs. Frequency

5.45nH
3.85nH
2.55nH
1.65nH

100
50

0
10

0
1

10

100

1000

10000

100

1000

10000

Frequency (MHz)

Frequency (MHz)

AL05B
Inductance vs. Frequency

Typical Q vs. Frequency


150

15
100

12
9

5.60nH
7.15nH
8.80nH
9.85nH
12.6nH

Inductance (nH)

18

50

3
0
10

100

1000

0
10

10000

100

1000

10000

Frequency (MHz)

Frequency (MHz)

AL12A
Typical Q vs. Frequency

30

210

25

180
150

20
15

Inductance (nH)

Inductance vs. Frequency

10

90
60

30

0
10

2.50nH
5.00nH
8.00nH
12.5nH
18.5nH

120

0
100

1000

Frequency (MHz)

10000

100

1000

10000

Frequency (MHz)

159

Air Core RF Inductors


AL Series
PERFORMANCE SPECIFICATIONS
AL12B
Inductance vs. Frequency

Typical Q vs. Frequency


140
120

150

100
Q

Inductance (nH)

200

100

17.5nH
22.0nH
28.0nH
35.5nH
43.0nH

80
60
40

50

20
0
100

0
10

100

1000

10000

1000
Frequency (MHz)

Frequency (MHz)

AL016
Typical Q vs. Frequency

250

300

200

250

22.0nH
39.0nH
47.0nH
56.0nH
68.0nH
82.0nH
120nH

200

150
Q

Inductance (nH)

Inductance vs. Frequency

100

150
100

50

50

0
10

100

1000

0
10

10000

100

1000

10000

Frequency (MHz)

Frequency (MHz)

AL023
Inductance vs. Frequency

Typical Q vs. Frequency


160

800

140
120

600
Q

Inductance (nH)

1000

400

60

0
1

10

100

Frequency (MHz)

160

100
80

200

90.0nH
169nH
307nH
538nH

1000

40
10

100
Frequency (MHz)

1000

Air Core RF Inductors


AL Series
TYPICAL RoHS REFLOW PROFILE
300

Time within 5C
of peak temperature
(30 seconds)

250

Ramp-Up
3C/sec max

Temperature (C)

217
200

Ramp-Down
6C/sec max
Peak Temperature
255260C

150

Reow
Time above 217C
(60150 seconds)

Preheat / Soak
(60120 seconds)

100

50

0
0

30

60

90

120

150

180

210

240

270

300

Time (seconds)

161

Air Core RF Inductors


AL Series
PACKAGING SPECIFICATIONS
The force for tearing off cover tape is
10 to 130 grams in the arrow direction

Thickness (t)
0.10 (.004) max

165 to 180

Embossed Cavity

Top Cover Tape

Base Tape
Embossed Carrier
Start

End

No Components

Components

No Components

160 (6.299) min


Cover Tape

390 (15.354) min


560 (22.047) max

User Direction of Feed

CARRIER TAPE REELS

DIMENSIONS OF CARRIER TAPE


4.0 0.1
(0.157 0.004)

G
MATERIAL:

PLASTIC

2.0 0.1
(0.079 0.004)
1.5 +0.1/-0
(0.059 +0.004/-0)

1.75 0.1
(0.069 0.004)

t
B

W
5
P

T
mm (inches)

Series
AL05A

AL05B
AL12A
AL12B
AL016
AL023

162

ITEM
DIM.
TOL.
DIM.
TOL.
DIM.
TOL.
DIM.
TOL.
DIM.
TOL.
DIM.
TOL.

A
178
2.0
180
MAX
178
2.0
178
2.0
340
MAX
340
MAX

B
21
0.8
21
0.8
25
1.0
50
1.0
20.2
MIN
20.2
MIN

C
13
0.8
13
+0.5/-0.2
15
0.5
15
0.5
13
0.5
13
0.5

N
75
2.0
50
MIN
75
2.0
75
2.0
100
REF
100
REF

G
8.4
+1.5
12.4
+2.0
12.5
+1.5
16.5
+1.5
16.5
0.5
24.5
0.5

T
12.5
+1.5
18.4
MAX
16.4
+1.5
20.4
+1.5
25.5
0.5
30.4
0.5

W
8
0.3
12
0.30
12
0.2
16
0.2
16
0.30
24.0
0.30

P
4
0.1
4
0.10
8
0.1
8
0.1
12
0.10
12.0
0.10

t
0.30
0.05
0.35
0.05
0.25
0.05
0.25
0.05
0.30
0.05
0.35
0.05

Square Air Core RF Inductors


AS Series
GENERAL DESCRIPTION
AVX Square Air Core RF Inductors, part of the wound air core inductor
family, are ideal for RF circuits, broadband I/O filtering, frequency selection,
or impedance matching. The unique square cross section of the air core
inductor provides better performance, and offers manufacturing
advantages over toroidal coils.

FEATURES

APPLICATIONS

Square cross section construction


Available in 0806, 0807, and 0908 sizes
20 Inducance values ranging
from 5.5nH to 27.3nH
High Q
High Current
Excellent SRF

RF Applications
RF Circuits
Broadband I/O Filtering
Impedance Matching

HOW TO ORDER
AS

06

05N5

Air Core Inductor


(Square Cross
Section)

Size
Size
06 = 0806
07 = 0807
08 = 0908

Inductance
05N5 =5.5nH
06N0 = 6.0nH
12N3 = 12.3nH

Tolerance
G = 2%
J = 5%
K = 10%

Termination
T = Sn/Ag over Cu
(96.5% Sn, 3% Ag,
0.5% Cu)

Packaging
R = 7 inch reel
(2000 pieces per reel)

ELECTRICAL SPECIFICATIONS
Technical Data
Inductance Range
Inductance Tolerance
Rated Current
Operating Temperature
Termination

All technical data related to an ambient temperature of +25C


5.5nH to 27.3nH
2%, 5%, 10%
2.7A, 2.9A, 4.4A
-40C to +125C
96.5% Tin/3% Silver over 0.5% Copper

ELECTRICAL SPECIFICATIONS

Note:

AVX P/N

Turns

AS0605N5*TR
AS0606N0*TR
AS0608N9*TR
AS0612N3*TR
AS0615N7*TR
AS0619N4*TR
AS0706N9*TR
AS0710N2*TR
AS0711N2*TR
AS0713N7*TR
AS0717N0*TR
AS0722N0*TR
AS0808N1*TR
AS0812N1*TR
AS0814N7*TR
AS0816N6*TR
AS0821N5*TR
AS0823N0*TR
AS0825N0*TR
AS0827N3*TR

3
3
4
5
6
7
3
4
4
5
6
7
3
4
4
5
6
6
7
7

Inductance
(nH)
5.5
6
8.9
12.3
15.7
19.4
6.9
10.2
11.2
13.7
17
22
8.1
12.1
14.7
16.6
21.5
23
25
27.3

Tolerance
(%)
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K
G, J, K

1. *Tolerance: G=2%, J=5%, K=10%


2. Inductance & Q measured on the HP4291B. With HP16193A test fixture.
3. SRF measured using the HP8753E

Q
min.
60
64
90
90
90
90
100
100
90
100
100
100
130
130
90
130
130
130
130
130

Test Freq.
(MHz)
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400

DCR max
(m)
3.4
6
7
8
9
10
6
7
6.3
8
9
10
6
7
7.2
8
9
10
10
10

SRF
(GHz)
4.9
5.2
4.3
4.8
4.4
4
4.6
4
3.6
4.3
4
3.5
5.2
4.3
3
3.4
3.7
2.6
2.5
3.2

Ir max
(A)
2.9
2.9
2.9
2.9
2.9
2.9
2.7
2.7
2.7
2.7
2.7
2.7
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4

4. Operating Temperature range: -40C to +125C


5. Electrical Specifications at 25C
6. MSL: Level 1

163

Square Air Core RF Inductors


AS Series
PHYSICAL DIMENSIONS
A

MAX.
C

MIN.
B

F
mm (inches)
Part Number
AS0605N5*TR
AS0606N0*TR
AS0608N9*TR
AS0612N3*TR
AS0615N7*TR
AS0619N4*TR
AS0706N9*TR
AS0710N2*TR
AS0711N2*TR
AS0713N7*TR
AS0717N0*TR
AS0722N0*TR
AS0808N1*TR
AS0812N0*TR
AS0814N7*TR
AS0816N6*TR
AS0821N5*TR
AS0823N0*TR

AS0825N0*TR
AS0827N3*TR

164

A
1.3460.102
(0.0530.004)
1.2950.102
(0.0510.004)
1.6260.152
(0.6400.006)
1.9300.152
(0.0760.006)
2.2860.152
(0.090.006)
2.5910.152
(0.1020.006)
1.2950.102
(0.0510.004)
1.6260.152
(0.0640.006)
1.5490.152
(0.0610.006)
1.9300.152
(0.0760.006)
2.2860.152
(0.090.006)
2.5910.152
(0.1020.006)
1.4730.152
(0.0580.006)
1.8540.152
(0.0730.006)
1.5490.152
(0.0610.006)
2.2100.152
(0.0870.006)
2.5650.152
(0.1010.006)
2.2350.152
(0.0880.006)
2.9720.152
(0.1170.006)
2.9720.152
(0.1170.006)

B
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
1.8290.254
(0.0720.01)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)
2.1340.152
(0.0840.006)

C
1.3970.102
(0.0550.004)
1.3970.102
(0.0550.004)
1.3970.102
(0.0550.004)
1.3970.102
(0.0550.004)
1.3970.102
(0.0550.004)
1.3970.102
(0.0550.004)
1.5240.254
(0.0600.010)
1.5240.254
(0.0600.010)
1.5240.254
(0.0600.010)
1.5240.254
(0.0600.010)
1.5240.254
(0.0600.010)
1.5240.254
(0.0600.010)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)
1.8290.152
(0.0720.006)

D
0.962
(0.038)
0.99
(0.390)
1.27
(0.050)
1.63
(0.064)
1.96
(0.070)
2.29
(0.090)
1.02
(0.040)
1.32
(0.052)
1.24
(0.049)
1.57
(0.062)
1.93
(0.076)
2.29
(0.090)
1.12
(0.044)
1.45
(0.570)
1.24
(0.049)
1.83
(0.072)
2.18
(0.086)
1.90
(0.075)
2.57
(0.101)
2.57
(0.101)

E
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)

F
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)
0.64
(0.025)

Square Air Core RF Inductors


AS Series
PERFORMANCE SPECIFICATIONS
AS06
Inductance vs. Frequency

Typical Q vs. Frequency

30

20
15

Inductance (nH)

25

10
5
0
10

100

1000

160
140
120
100
80
60
40
20
0
10

10000

19N4
15N7
08N9
05N5

100

1000

10000

Frequency (MHz)

Frequency (MHz)

AS07
Typical Q vs. Frequency

30

250

25

200

20
15

100

10

50

5
0
10

22N0
17N0
11N2
06N9

150
Q

Inductance (nH)

Inductance vs. Frequency

100

1000

0
10

10000

100

1000

10000

Frequency (MHz)

Frequency (MHz)

AS08
Typical Q vs. Frequency

80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0

10

Inductance (nH)

Inductance vs. Frequency

100

1000

Frequency (MHz)

10000

500
450
400
350
300
250
200
150
100
50
0
10

27N3
16N6
12N1
08N1

100

1000

10000

Frequency (MHz)

165

Square Air Core RF Inductors


AS Series
TYPICAL RoHS REFLOW PROFILE
300

Time within 5C
of peak temperature
(30 seconds)

250

Ramp-Up
3C/sec max

Temperature (C)

217
200

Ramp-Down
6C/sec max
Peak Temperature
255260C

150

Reow
Time above 217C
(60150 seconds)

Preheat / Soak
(60120 seconds)

100

50

0
0

30

60

90

120

150

180

Time (seconds)

166

210

240

270

300

Square Air Core RF Inductors


AS Series
PACKAGING SPECIFICATIONS
The force for tearing off cover tape is
10 to 130 grams in the arrow direction

Thickness (t)
0.10 (.004) max

165 to 180
Top Cover Tape

Embossed Cavity

Base Tape
Embossed Carrier
Start

End

No Components

Components

No Components

160 (6.299) min


Cover Tape

390 (15.354) min


560 (22.047) max

User Direction of Feed

CARRIER TAPE REELS

DIMENSIONS OF CARRIER TAPE


G
P2

D0

P0

F
W

E
D1
C

P1

T
mm (inches)

ITEM
DIM.
TOL.

A
178
(7.008)
2.0
(0.079)

B
25
(0.984)
1.0
(0.039)

C
15
(0.591)
0.5
(0.020)

G
12.5
(0.492)
+1.5
(0.059)

N
75
(2.953)
2.0
(0.079)

T
16.4
(0.646)
+1.5
(0.059)

W
12.0
(0.472)
0.2
(0.008)

E
1.75
(0.069)
0.1
(0.004)

F
5.50
(0.217)
0.1
(0.004)

P1
4.00
(0.157)
0.1
(0.004)

P2
2.0
(0.079)
0.1
(0.004)

P0
4.0
(0.157)
0.1
(0.004)

D0
1.5
(0.059)
+0.1
(0.004)

D1
1.0
(0.039)
0.1
(0.004)

t
0.23
(0.009)
0.05
(0.020)

167

Wire Wound Chip Inductor


LCWC Series
FEATURES

APPLICATIONS

Ceramic base provide high SRF


Ultra-compact inductors provide high Q factors
Low profile, high current are available
Miniature SMD chip inductor for fully automated
assembly
Outstanding endurance from Pull-up force,
mechanical shock and pressure
Tighter tolerance down to 2%
Smaller size of 0402 (1005)

RF Products:
Cellular Phone (CDMA/GSM/PHS)
Cordless Phone (DECT/CT1CT2)
Remote Control, Security System
Wireless PDA
Smart Phone
WLL, Wireless LAN / Mouse /
Keyboard / Earphone
VCO, RF Module & Other Wireless Products

Overall
B

COLOR CODING

CONSTRUCTION

DIMENSIONS

Base Station, Repeater


GPS Receiver
Broad Band Applications:
CATV Filter, Tuner
Cable Modem/ XDSL Tuner
Set Top Box
IT Applications:
USB 2.0
IEEE 1394

UV Glue

Pad
Layout

Color Coding
Ceramic Core

E
Terminal

Electrode
(Ag/Pd+Ni+Sn)

Terminal Wraparound:
Approx. 0.007 inches
0.18 (0.007) Both Ends

Magnet Wire

STANDARD
Type

Size
(inch)

0402

0402

0603

0603

0805

0805

1008

1008

1206

1206

mm (inches)
A
Max.
1.27
(0.050)
1.80
(0.071)
2.29
(0.090)
2.92
(0.115)
3.45
(0.136)

B
Max.
0.76
(0.030)
1.12
(0.044)
1.73
(0.068)
2.79
(0.110)
1.90
(0.075)

C
Max.
0.61
(0.024)
1.02
(0.040)
1.52
(0.060)
2.13
(0.084)
1.40
(0.055)

D
Ref.
0.15
(0.006)
0.38
(0.015)
0.51
(0.020)
0.65
(0.026)
0.50
(0.020)

A
Max.
2.29
(0.090)
2.92
(0.115)

B
Max.
1.73
(0.068)
2.79
(0.110)

C
Max.
1.03
(0.041)
1.40
(0.055)

D
Ref.
0.51
(0.020)
0.65
(0.026)

B
Max.
1.12
(0.044)
1.73
(0.068)
2.79
(0.110)

C
Max.
1.02
(0.040)
1.52
(0.060)
2.03
(0.080)

D
Ref.
0.38
(0.015)
0.51
(0.020)
0.65
(0.026)

0.51
(0.020)
0.76
(0.030)
1.27
(0.050)
2.03
(0.080)
1.60
(0.063)

0.23
(0.009)
0.33
(0.013)
0.44
(0.017)
0.51
(0.020)
0.50
(0.020)

0.56
(0.022)
0.86
(0.034)
1.02
(0.040)
1.52
(0.060)
2.20
(0.087)

0.66
(0.026)
1.02
(0.040)
1.78
(0.070)
2.54
(0.100)
1.93
(0.076)

0.50
(0.020)
0.64
(0.025)
1.02
(0.040)
1.02
(0.040)
1.02
(0.040)

0.46
(0.018)
0.64
(0.025)
0.76
(0.030)
1.27
(0.050)
1.78
(0.070)

LOW PROFILE
Type

Size
(inch)

0805

0805

1008

1008

mm (inches)
E

1.27
(0.050)
2.03
(0.080)

0.44
(0.017)
0.51
(0.020)

1.02
(0.040)
1.52
(0.060)

1.78
(0.070)
2.54
(0.100)

1.02
(0.040)
1.02
(0.040)

0.76
(0.030)
1.27
(0.050)

HIGH CURRENT/HIGH Q
Type

Size
(inch)

0603

0603

0805

0805

1008

1008

168

A
Max.
1.80
(0.071)
2.29
(0.090)
2.92
(0.115)

mm (inches)
E

0.76
(0.030)
1.27
(0.050)
2.03
(0.080)

0.33
(0.013)
0.44
(0.017)
0.51
(0.020)

0.86
(0.034)
1.02
(0.040)
1.52
(0.060)

1.02
(0.040)
1.78
(0.070)
2.54
(0.100)

0.64
(0.025)
1.02
(0.040)
1.02
(0.040)

0.64
(0.025)
0.76
(0.030)
1.27
(0.050)

Weight (g)
(1000pcs)
0.8
3.46
12.13
30.73
40

Wire Wound Chip Inductor


LCWC Series
HOW TO ORDER
LC

WC

0402

101

Family
LC = Chip Inductor

Series
WC = WW Ceramic

Size
0402
0603
0805
1008
1206

Tolerance
G = 2%
J = 5%
K = 10%

Inductance
3N9 = 3.9nH
39N = 39nH
R39 = 390nH
3R9 = 3900nH
153 = 15000nH

Style
G = Standard
Q = High Q/
Current
R = Low Profile

Termination
T = Sn Plate

Special
A = Standard

Packaging
R = 7" Reel

STANDARD ELECTRICAL SPECIFICATIONS


0402
lnductance
(nH)
1.0
1.9
2.0
2.2
2.4
2.7
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
8.7
9.0
9.5
10
11
12
13
15
16
18
19
20
22
23
24
27
30
33
36
39
40
43
47
51
56
68

Tolerance
10%
10%
10%
10%
10%
10%
10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Quality Factor
Min.
16
16
16
19
15
16
19
19
19
18
18
20
20
20
20
22
22
18
22
18
21
24
24
24
24
24
25
24
25
25
24
25
24
25
24
24
25
24
25
25
25
25
22

SRF
Factor
12.70
11.30
11.10
10.80
10.50
10.40
7.00
6.80
5.80
6.00
4.70
4.80
4.80
4.80
4.80
4.80
4.40
4.10
4.16
4.00
3.90
3.68
3.60
3.45
3.28
3.10
3.10
3.04
3.00
2.80
2.72
2.70
2.48
2.35
2.35
2.32
2.10
2.24
2.03
2.10
1.75
1.76
1.62

DCR
() max.
0.045
0.070
0.070
0.070
0.070
0.120
0.066
0.066
0.066
0.091
0.130
0.083
0.083
0.083
0.083
0.104
0.104
0.200
0.104
0.200
0.195
0.120
0.120
0.210
0.172
0.220
0.230
0.202
0.250
0.300
0.300
0.300
0.300
0.350
0.350
0.440
0.550
0.500
0.810
0.830
0.820
0.970
1.120

lDC
(mA) max.
1360
1040
1040
960
790
640
840
840
840
700
640
800
760
760
680
680
680
480
680
480
480
640
640
440
560
560
420
480
420
400
400
400
400
400
400
320
200
320
100
150
100
100
100

900MHz
L
Q
1.02
77
1.72
68
1.93
54
2.19
59
2.24
51
2.23
42
3.10
65
3.56
45
3.89
50
4.19
47
4.55
48
5.15
56
5.16
54
6.16
52
6.56
63
7.91
60
8.50
57
8.78
54
9.07
62
9.42
54
9.80
50
10.70
52
11.90
53
13.40
51
14.60
55
16.60
46
18.30
57
19.10
50
20.70
52
23.20
53
23.80
49
25.10
51
28.70
49
31.10
46
34.90
31
39.50
44
41.70
47
39.00
44
45.80
46
50.00
38
50.40
47
57.40
49
69.60
45

1.7GHz
L
Q
1.02
69
1.74
82
1.93
75
2.23
100
2.27
68
2.25
61
3.12
87
3.62
71
4.00
75
4.30
71
4.68
68
5.25
82
5.28
81
6.37
76
6.93
78
8.22
88
8.85
84
9.21
73
9.53
78
9.98
69
10.10
67
11.20
78
12.70
71
14.60
57
15.50
77
18.80
47
20.30
62
21.10
67
23.70
53
26.80
53
26.90
64
29.50
50
33.50
63
38.50
39
41.70
32
48.40
53
50.20
45
47.40
33
61.60
34
55.80
37
59.40
37
72.40
40
83.40
38

169

Wire Wound Chip Inductor


LCWC Series
0603

lnductance
(nH)
1.6
1.8
2.2
2.3
3.3
3.6
3.9
4.3
4.5
4.7
5.1
5.6
6.2
6.3
6.8
7.5
8.2
8.7
9.1
9.5
10
11
12
15
16
17
18
20
22
23
24
27
30
33
36
39
43
47
51
56
62
68
72
82
91
100
110
120
130
140
150
160
180
220
260
270
280
300
330
390
470

170

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
200
200
200
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
100

Quality Factor
Min.
24
16
15
16
22
22
22
22
20
25
20
20
25
25
27
28
27
28
35
28
31
31
35
35
35
35
35
40
38
38
38
40
40
40
37
40
38
38
38
38
37
37
34
34
30
34
32
32
30
28
28
25
25
25
25
25
25
25
25
25
23

SRF
Factor
12.5
12.5
6.00
>4.00
>6.00
5.80
>6.00
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
4.80
4.80
4.80
4.80
5.40
4.80
4.00
4.00
4.00
3.30
3.20
3.10
3.00
3.00
2.85
2.80
2.80
2.80
2.30
2.30
2.20
2.00
2.00
1.90
1.90
1.80
1.70
1.70
1.70
1.70
1.40
1.35
1.30
1.40
1.30
1.30
1.30
1.25
1.20
1.00
0.90
1.00
0.75
0.90
0.90
0.60

DCR
() max.
0.030
0.045
0.100
0.140
0.080
0.063
0.080
0.063
0.120
0.120
0.160
0.170
0.110
0.110
0.110
0.106
0.110
0.109
0.130
0.135
0.130
0.086
0.130
0.170
0.110
0.170
0.170
0.190
0.190
0.190
0.130
0.220
0.150
0.220
0.250
0.250
0.280
0.280
0.280
0.310
0.340
0.340
0.490
0.540
0.500
0.580
0.610
0.650
0.720
0.870
0.950
1.400
1.400
1.600
2.000
2.100
2.400
2.500
3.800
4.350
3.600

lDC
(mA) max.
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
600
600
600
600
600
600
600
600
600
600
600
600
400
400
400
300
300
300
280
280
280
250
250
200
200
100
150
100
100
80

900MHz
L
Q
1.53
35
1.63
35
2.18
41
2.32
32
3.35
47
3.53
49
3.95
49
4.32
49
4.74
55
4.65
53
5.13
47
5.53
56
6.28
60
6.67
41
6.75
60
7.70
60
8.25
64
8.86
62
9.20
70
9.70
59
10.0
66
11.3
53
12.3
72
15.4
64
16.5
55
17.6
56
18.7
70
20.7
80
22.8
73
24.1
71
25.7
45
29.2
74
31.4
47
36.0
67
39.1
47
42.7
60
46.9
44
52.2
62
55.5
69
62.5
56
68.0
40
80.5
54
82.0
53
96.2
54
110.0
50
124.0
49
138.0
43
166.0
39
185.0
60
190.0
80
230.0
25
215.0
20
305.0
22
377.0
21
469.0
21
523.0
19
524.0
18
539.7
21
680.4
20
734.5
29
-

1.7GHz
L
Q
1.58
55
1.66
50
2.20
64
2.35
40
3.40
65
3.58
65
3.96
67
4.43
67
4.87
92
4.80
67
5.36
56
5.86
77
6.40
85
6.86
61
7.10
81
7.82
65
8.40
81
9.32
58
9.70
80
9.92
61
10.6
83
12.1
56
13.5
83
16.8
89
18.0
52
19.4
44
21.4
69
23.5
30
26.1
71
28.0
71
30.9
40
34.6
65
39.8
28
49.5
42
48.9
24
60.2
40
60.3
21
77.2
35
82.2
34
97.0
26
110
10
168
21
135
20
177
21
416.4
6
319.5
13
342.7
15
529.3
8
-

Color
Code
Blue
Black
White
Yellow
Red
Violet
Brown
Orange
Gray
Violet
Green
Yellow
Black
Black
Red
Brown
Green
Yellow
Black
Blue
Orange
Gray
Yellow
Green
White
Red
Blue
Green
Violet
Orange
Black
Gray
Brown
White
Red
Black
Orange
Brown
Blue
Red
Gray
Orange
Yellow
Green
Brown
Blue
Violet
Gray
White
Blue
White
Yellow
Black
Brown
Violet
Red
Green
Orange
Blue
Yellow
White

Wire Wound Chip Inductor


LCWC Series
0805
Inductance
(nH)
2.7
2.8
3.0
3.3
5.6
6.2
6.8
7.5
8.2
8.7
10
12
15
18
22
24
27
33
36
39
43
47
56
68
72
82
91
100
110
120
150
180
200
220
240
250
270
300
330
360
390
430
470
560
600
620
680
750
820
1000
1200
1500
1800
2200
2700
3300
4700

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
200
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
50
50
25
25
25
25
25
25
25
7.9
7.9
7.9
7.9
7.9
7.9
7.9

Quality Factor
min.
80 @ 1500MHz
80 @ 1500MHz
65 @ 1500MHz
50 @ 1500MHz
65 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
60 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
55 @ 500MHz
50 @ 500MHz
55 @ 500MHz
60 @ 500MHz
55 @ 500MHz
60 @ 500MHz
60 @ 500MHz
60 @ 500MHz
60 @ 500MHz
60 @ 500MHz
65 @ 500MHz
65 @ 500MHz
65 @ 500MHz
65 @ 500MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
44 @ 250MHz
50 @ 250MHz
48 @ 250MHz
48 @ 250MHz
48 @ 250MHz
48 @ 250MHz
48 @ 250MHz
33 @ 100MHz
33 @ 100MHz
23 @ 50MHz
23 @ 50MHz
23 @ 50MHz
23 @ 50MHz
23 @ 50MHz
23 @ 50MHz
20 @ 50MHz
18 @ 25MHz
16 @ 25MHz
16 @ 7.9MHz
16 @ 7.9MHz
16 @ 7.9MHz
15 @ 7.9MHz
15 @ 7.9MHz

SRF
(GHz) min.
7.900
7.900
7.900
6.000
5.500
5.500
5.500
4.500
4.700
4.000
4.200
4.000
3.400
3.300
2.600
2.000
2.500
2.050
1.700
2.000
1.650
1.650
1.550
1.450
1.400
1.300
1.200
1.200
1.000
1.100
0.920
0.870
0.860
0.850
0.690
0.680
0.650
0.620
0.600
0.580
0.560
0.430
0.375
0.340
0.260
0.220
0.200
0.200
0.200
0.100
0.100
0.100
0.080
0.060
0.050
0.040
0.040

DCR
() max.
0.06
0.06
0.06
0.08
0.08
0.11
0.11
0.14
0.12
0.21
0.10
0.15
0.17
0.20
0.22
0.22
0.25
0.27
0.27
0.29
0.34
0.31
0.34
0.38
0.40
0.42
0.48
0.46
0.48
0.51
0.56
0.64
0.66
0.70
1.00
1.00
1.00
1.20
1.40
1.45
1.50
1.70
1.70
1.90
1.60
2.20
2.20
2.30
2.35
2.50
2.50
2.50
2.50
2.70
3.10
4.40
6.40

IDC
(mA) max.
800
800
800
600
600
600
600
600
600
400
600
600
600
600
500
500
500
500
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
350
350
350
330
310
300
290
230
250
230
450
210
190
180
180
170
170
170
170
160
150
90
90

Color Code
Brown
Gray
White
Black
Orange
Green
Brown
Green
Red
White
Blue
Orange
Yellow
Green
Blue
Gray
Violet
Gray
Orange
White
Yellow
Black
Brown
Red
Green
Orange
Black
Yellow
Brown
Green
Blue
Violet
Orange
Gray
Red
Green
White
Yellow
Black
Green
Brown
Blue
Red
Orange
White
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Red
Orange
Blue
Green

171

Wire Wound Chip Inductor


LCWC Series
1008

Inductance
(nH)
*5.6
*10
*12
*15
*18
*22
24
*27
*33
36
*39
*47
*56
*62
*68
75
*82
91
*100
*120
*150
*180
*220
*240
*270
*300
*330
*360
*390
*430
*470
*560
*620
*680
*750
*820
*910
*1000
*1200
*1500
*1800
*2200
*2700
*3300
*3900
*4700
5600
6800
8200
10000
12000
15000

Tolerance
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
2.52
2.52
2.52

*Test Methods I Instrument: Network I Spectrum Analyzer

172

Quality Factor
min.
50 @ 1500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 350MHz
55 @ 350MHz
55 @ 350MHz
55 @ 350MHz
60 @ 350MHz
60 @ 350MHz
60 @ 350MHz
65 @ 350MHz
65 @ 350MHz
65 @ 350MHz
65 @ 350MHz
60 @ 350MHz
60 @ 350MHz
50 @ 350MHz
60 @ 350MHz
60 @ 350MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
35 @ 50MHz
35 @ 50MHz
35 @ 50MHz
28 @ 50MHz
28 @ 50MHz
28 @ 50MHz
22 @ 25MHz
22 @ 25MHz
18 @ 25MHz
18 @ 25MHz
16 @ 7.96MHz
15 @ 7.96MHz
15 @ 7.96MHz
15 @ 7.96MHz
15 @ 7.96MHz
15 @ 7.96MHz

SRF
(GHz) min.
4.000
4.100
3.300
2.500
2.400
2.400
1.900
1.600
1.600
1.600
1.500
1.500
1.300
1.250
1.300
1.100
1.000
1.000
1.000
0.950
0.850
0.750
0.700
0.650
0.600
0.585
0.570
0.530
0.500
0.480
0.450
0.415
0.375
0.375
0.360
0.350
0.320
0.290
0.250
0.200
0.160
0.160
0.140
0.110
0.100
0.090
0.020
0.040
0.025
0.020
0.018
0.015

DCR
() max.
0.15
0.08
0.09
0.11
0.12
0.12
0.13
0.13
0.14
0.15
0.15
0.16
0.18
0.20
0.20
0.21
0.22
0.45
0.56
0.63
0.70
0.77
0.84
0.88
0.91
1.00
1.05
1.10
1.12
1.15
1.19
1.33
1.40
1.47
1.54
1.61
1.68
1.75
2.00
2.30
2.60
2.80
3.20
3.40
3.60
4.00
4.00
4.90
6.00
9.00
10.5
11.5

IDC
(mA) max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
650
650
800
620
500
500
690
450
450
470
630
470
470
580
300
540
360
400
380
370
310
330
300
280
290
290
260
260
240
200
170
150
130
120

Color Code
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
Orange
White
Black
Brown
Blue
Red
White
Orange
White
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet

Wire Wound Chip Inductor


LCWC Series
1206
Inductance
(nH)
6.8
10
12
15
18
22
24
27
33
39
47
56
62
68
82
91
100
120
150
180
220
270
300
330
360
390
470
560
620
680
750
820
910
1000
1200

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
35
35
35
35
35
35
35
35

Quality Factor
min.
30 @ 300MHz
40 @ 300MHz
40 @ 300MHz
40 @ 300MHz
50 @ 300MHz
50 @ 300MHz
50 @ 300MHz
50 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
60 @ 300MHz
55 @ 300MHz
55 @ 300MHz
55 @ 300MHz
50 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz
45 @ 150MHz

SRF
(GHz) min.
5.50
4.00
3.20
3.20
2.80
2.20
2.00
1.80
1.80
1.80
1.50
1.45
1.20
1.20
1.20
1.10
1.10
0.75
0.95
0.90
0.76
0.74
0.68
0.65
0.60
0.60
0.55
0.47
0.47
0.45
0.44
0.42
0.41
0.40
0.38

DCR
() max.
0.07
0.08
0.08
0.10
0.10
0.10
0.10
0.11
0.11
0.12
0.13
0.14
0.20
0.26
0.21
0.24
0.26
0.26
0.31
0.43
0.50
0.56
0.60
0.62
0.65
0.75
1.30
1.34
1.58
1.58
2.25
1.82
2.95
2.80
3.20

IDC
(mA) max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
950
920
900
850
800
750
700
670
630
600
590
550
530
490
460
460
430
320
400
310
320
300

Color Code
Brown
Red
Orange
Yellow
Green
Blue
Red
Violet
Gray
White
Black
Brown
Violet
Red
Orange
White
Yellow
Green
Blue
Violet
Gray
White
Green
Black
Blue
Brown
Red
Orange
Gray
Yellow
White
Green
Green
Blue
Violet

173

Wire Wound Chip Inductor


LCWC Series
LOW PROFILE ELECTRICAL SPECIFICATIONS
0805
Inductance
(nH)
1.8
3.9
4.7
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
1000

Tolerance
5%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
200
150
150
150
150
25

Quality Factor
min.
55 @ 1500MHz
60 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
50 @ 1000MHz
55 @ 750MHz
55 @ 750MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
50 @ 500MHz
40 @ 250MHz
40 @ 250MHz
16 @ 50MHz

SRF
(GHz) min.
9.40
6.10
5.50
5.50
4.80
3.30
3.80
2.95
3.10
2.90
2.45
2.35
2.20
2.00
1.85
1.50
1.50
1.20
1.15
1.05
0.08

DCR
() max.
0.03
0.06
0.06
0.08
0.08
0.08
0.10
0.10
0.13
0.15
0.23
0.28
0.33
0.39
0.39
0.40
0.44
0.64
0.68
0.80
3.50

IDC
(mA) max.
800
800
800
800
800
800
800
800
800
800
600
600
600
600
500
500
500
400
300
300
170

L Freq.
(MHz)
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25

Quality Factor
min.
42 @ 1500MHz
42 @ 1500MHz
50 @ 1500MHz
50 @ 1500MHz
57 @ 500MHz
50 @ 350MHz
72 @ 500MHz
50 @ 350MHz
69 @ 500MHz
67 @ 500MHz
72 @ 500MHz
75 @ 500MHz
68 @ 500MHz
75 @ 500MHz
50 @ 350MHz
40 @ 100MHz

SRF
(GHz) min.
6.00
6.00
5.40
5.00
3.00
2.40
2.40
1.60
2.40
2.00
1.90
1.80
1.70
1.40
0.90
0.415

DCR
() max.
0.03
0.15
0.17
0.22
0.22
0.12
0.33
0.13
0.38
0.43
0.48
0.52
0.55
0.56
0.40
1.33

IDC
(mA) max.
1000
1000
1000
1000
1000
1000
1000
850
600
600
600
600
510
510
450
400

Color Code
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
Whit
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
Whit
Black

1008
Inductance
(nH)
3.3
4.2
6.8
8.2
15
18
20
27
30
40
50
60
70
80
180
560

174

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

Color Code
White
Black
Brown
Red
Orange
Gray
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Blue
Red

Wire Wound Chip Inductor


LCWC Series
HIGH CURRENT ELECTRICAL SPECIFICATIONS
0603
Inductance
(nH)
1.6
3.6
3.9
6.8
7.5
8.2
10
12
15
18
22
24

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250

Quality Factor
min.
24
24
25
35
38
38
38
38
38
40
42
42

SRF
(GHz) min.
12.50
5.90
5.90
5.80
3.70
3.70
3.70
3.00
2.80
2.80
2.40
2.40

DCR
() max.
0.030
0.048
0.054
0.054
0.059
0.060
0.071
0.075
0.080
0.099
0.099
0.105

IDC
(mA) max.
2400
2300
2200
2100
2100
2000
2000
2000
1900
1900
1800
1800

Color Code
Black
Brown
Red
Orange
Yellow
White
Green
Blue
Violet
Gray
White
Black

HIGH Q ELECTRICAL SPECIFICATIONS


0805
Inductance
(nH)
2.5
5.6
6.2
6.8
8.2
10
12
15
16
18
20
22
27
30
39
48
51

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

L Freq.
(MHz)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200

Quality Factor
min.
80 @ 1500MHz
98 @ 1500MHz
88 @ 1000MHz
80 @ 1000MHz
75 @ 1000MHz
80 @ 1000MHz
80 @ 1000MHz
80 @ 1000MHz
72 @ 500MHz
75 @ 500MHz
70 @ 500MHz
80 @ 500MHz
75 @ 500MHz
65 @ 500MHz
65 @ 500MHz
65 @ 500MHz
65 @ 500MHz

SRF
(GHz) min.
6.00
6.00
4.75
4.40
3.00
3.00
3.00
2.80
2.95
2.55
2.05
2.00
2.00
1.95
1.60
1.40
1.40

DCR
() max.
0.020
0.035
0.035
0.035
0.075
0.060
0.045
0.100
0.060
0.060
0.055
0.100
0.070
0.095
0.110
0.095
0.120

IDC
(mA) max.
1600
1600
1600
1600
1000
1600
1600
1200
1500
1400
1400
1200
1300
1200
1100
1200
1000

L Freq.
(MHz)
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

Quality Factor
min.
70 @ 1500MHz
75 @ 1500MHz
75 @ 1500MHz
75 @ 500MHz
60 @ 500MHz
70 @ 500MHz
62 @ 350MHz
62 @ 350MHz
75 @ 350MHz
75 @ 350MHz
75 @ 350MHz
75 @ 350MHz
80 @ 350MHz
80 @ 350MHz
50 @ 350MHz

SRF
(GHz) min.
6.00
6.00
6.00
3.80
3.60
2.80
2.70
2.05
1.70
1.30
1.45
1.23
1.15
1.06
0.82

DCR
() max.
0.04
0.05
0.05
0.05
0.06
0.06
0.07
0.07
0.09
0.09
0.12
0.12
0.13
0.16
0.16

IDC
(mA) max.
1600
1600
1600
1600
1600
1500
1400
1400
1300
1300
1200
1200
1100
1100
1000

Color Code
Black
Brown
Red
White
Gray
Black
Orange
Black
Yellow
Green
Blue
Black
Violet
Gray
White
Black
Brown

1008
Inductance
(nH)
3.0
3.9
4.1
7.8
10
12
18
22
33
39
47
56
68
82
100

Tolerance
5, 10%
5, 10%
5, 10%
5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%
2, 5, 10%

Color Code
Black
White
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
Brown
Red
Orange

175

Wire Wound Chip Inductor


LCWC Series
ENVIRONMENTAL CHARACTERISTICS
MECHANICAL PERFORMANCE TEST
Items
Inductance
Q
SRF
DC Resistance RDC

Requirement

Refer to standard electrical


characteristic spec.

Rated Current IDC


Over Load
Withstanding Voltage
Insulation Resistance

Inductors shall have no evidence of


electrical and mechanical damage
Inductors shall be no evidence of
electrical and mechanical damage.
1000M ohm min.

Test Methods
HP4286
HP4286
HP4287
Micro-Ohm meter (Gom-801G)
Applied the current to coils, The inductance change
should be less than 10% to initial value
Applied 2 times of rated allowed DC current
to inductor for a period of 5 minutes
AC voltage of 500 VAC applied between inductors
terminal and case for 1 min.
100 VDC applied between inductor terminal and
case and case

MECHANICAL PERFORMANCE TEST


Items

Requirement

Vibration

Appearance: No damage
L change: within 5%
Q change: within 10%

Resistance to
Soldering Heat
Component Adhesion
(Push Test)

1 lbs. For 0402


2 lbs. For 0603
3 lbs. For the rest

Drop

No damage

Solderability

90% covered with solder

Resistance to Solvent

No damage on appearance and marking

Test Methods
Test device shall be soldered on the substrate
Oscillation Frequency: 10 to 55 to 10Hz for 1 min.
Amplitude: 1.5 mm
Time: 2 hrs for each axis (X, Y &Z), total 6 hrs
Solder Temperature: 26050C
Immersion Time: 102 seconds
The device should be soldered (2605 for 10 seconds)
to a tinned copper subs rate. A dynamiter force gauge
should be applied to the side of the component. The
device must with stand a minimum force of 2 or 4
pounds without a failure of adhesion on termination
Dropping chip by each side and each corner.
Drop 10 times in total
Drop height: 100 cm
Drop weight: 125 g
Inductor shall be dipped in a melted solder bath at
2455 for 3 seconds
MIL-STD202F, Method 215D

CLIMATIC TEST
Items
Temperature Characteristic

Requirement

Humidity

Low Temperature Storage

Appearance: No damage
L change: within 10%
Q change: within 20%

1
2
3
4

Thermal Shock

7
High Temperature Storage
High Temperature Load Life
Damp Heat with Load

176

Test Methods
-40 ~ +125C
Temperature: 402C
Relative Humidity: 90 ~ 95% Time: 962 hrs
Measured after exposure in the room condition for 2 hrs
Temperature: -402C
Time: 962 hrs
Inductors are tested after 1 hour at room temperature
One cycle:
Step
Temperature (C)
Time (min.)

There should be no evidence of


short of open circuit.

-253
252
1253
252

30
15
30
15

Total: 5 cycles
Temperature: 1252C
Time: 962 hrs
Measured after exposure in the room condition for 1 hour
Temperature: 852C
Time: 100012 hrs
Load: Allowed DC current
Temperature: 402C
Relative Humidity: 90 ~ 95%
Time: 100012 hrs
Load: Allowed DC current

Wire Wound Chip Inductor


LCWC Series
REEL DIMENSIONS AND PACKAGING QUANTITY
1.20 0.20
(0.047 0.008)

D: 21.8 0.80
(0.858 0.031)

Thickness (t)
0.10 (.004) max

Label

Embossed Cavity

60.0 0.50
(2.362 0.020)

D: 13.0 0.30
(0.512 0.012)

9.00 0.30
(0.354 0.0112)

2.00 0.50
(0.079 0.020)

Embossed Carrier

11.4 1.00
(0.449 0.039)

PAPER TAPE SPECIFICATION AND PACKAGING QUANTITY


1.75 0.10
(0.069 0.004)

P0
P1

1.5

B
A

P
mm (inches)

Type
LCWC0402
LCWC0603

A
0.72
(0.028)
1.35
(0.053)

B
1.19
(0.047)
1.95
(0.077)

H
0.60
(0.024)
0.95
(0.037)

F
3.50
(0.138)
3.50
(0.138)

P
4.00
(0.157)
4.00
(0.157)

P0
4.00
(0.147)
4.00
(0.147)

P1
2.00
(0.079)
2.00
(0.079)

W
8.00
(0.315)
8.00
(0.315)

ReeI (EA)
4,000
4,000

EMBOSSED PLASTIC PAPER TAPE SPECIFICATION AND PACKAGING QUANTITY


4.00 0.10
(0.157 0.004)

1.50

D
1.50

mm (inches)
Type
LCWC0805
LCWC0805 (R)
LCWC0805 (Q)
LCWC1206
LCWC1008
LCWC1008 (R)
LCWC1008 (Q)

8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)
8.00 0.20
(0.315 0.008)

1.85 0.10
(0.073 0.073)
1.80 0.10
(0.071 0.073)
1.85 0.10
(0.073 0.073)
1.95 0.10
(0.077 0.073)
2.70 0.10
(0.106 0.073)
2.70 0.10
(0.106 0.073)
2.70 0.10
(0.106 0.073)

4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)
4.00 0.10
(0.157 0.073)

2.30 0.10
(0.091 0.073)
2.30 0.10
(0.091 0.073)
2.30 0.10
(0.091 0.073)
3.50 0.10
(0.138 0.073)
2.80 0.10
(0.110 0.073)
2.80 0.10
0.110 0.073)
2.80 0.10
0.110 0.073)

3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)
3.50 0.05
(0.138 0.002)

1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)
1.75 0.10
(0.069 0.073)

2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)
2.00 0.05
(0.079 0.002)

1.45 0.05
(0.057 0.002)
0.90 0.05
(0.035 0.002)
1.45 0.05
(0.057 0.002)
1.50 0.05
(0.059 0.002)
2.00 0.05
(0.079 0.002)
1.50 0.05
(0.059 0.002)
2.00 0.05
(0.079 0.002)

0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)
0.23 0.05
(0.009 0.002)

ReeI (EA)
2,000
2,000
2,000
2,000
2,000
2,000
2,000

177

RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
RF/Microwave C0G (NP0) Capacitors
RF/Microwave U Series Designer Kits

178

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
FEATURES:

Ultra Low ESR


High Q
High Self Resonance
Capacitance Range 0.1 pF to 1000 pF

APPLICATIONS:

RF Power Amplifiers
Low Noise Amplifiers
Filter Networks
MRI Systems

HOW TO ORDER
UQ

CB

AVX Style

100

Case Size

Capacitance

CA = 0605
CB = 1210
CR = 0709
CL = 0402
CS = 0603
CF = 0805

EIA Capacitance Code in pF.


First two digits = significant
figures or R for decimal
place.

See mechanical
dimensions below

Voltage
Code
5 = 50V
1 = 100V
E = 150V
2 = 200V
V = 250V
9 = 300V
7 = 500V

A 1J
10

ME
Packaging Code

Failure Rate
Code

ME = 7" Reel Marked


(0605, 1210 &
0709 only)
2A = 7" Unmarked
(0402, 0603, &
0805 only)

A = Not
Applicable

* Vertical T&R available

Temperature
Coefficient Code

MECHANICAL DIMENSIONS:
W

Third digit = number of zeros


or after R significant figures.

A = 030ppm/C

Capacitance
Tolerance Code

Termination Style
Code

A = .05 pF
B = .1 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

J = Nickel Barrier
Sn/Pb (60/40)
**T = 100% Tin
**C = Non-Magnetic
Barrier/Tin

**RoHS compliant

inches (millimeters)

Case

Length (L)

Width (W)

Thickness (T)

Band Width (bw)

UQCA

.055 + .015 - .010


(1.40+ .381 - .254)
.110 + .020 - .010
(2.79 +.508 -.254)
.070 .015
(1.78 .381)
.040 .004
(1.02 .100)
.063 .006
(1.60 0.15)
.079 .008
(2.01 0.20)

.055.015
(1.40.381)
.110.015
(2.79.381)
.090.010
(2.29.254)
.020.004
(0.51.100)
.032.006
(0.810.15)
.049.008
(1.240.20)

.057 (1.45) max.

.010 + .010 -.005


(.254 +.254 -.127)
.015.010
(.381.254)
.010 + .010 -.005
(.254 +.254 -.127)
.010 .006
(0.25 0.15)
.014 .006
(0.36 0.15)
.020 0.01
(0.51 0.25)

UQCB
bw

UQCR
UQCL
UQCS
UQCF

.102 (2.59) max.


.115 (2.92) max.
.024 (.600) max.
.035 (.890) max.
.051 (1.30) max.

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).
8mm carrier
7" reel: UQCA = 500 or 4000 pc T&R
UQCB = 500 or 1000 pc T&R
UQCR = 500 or 1000 pc T&R

UQCL = 500, 4000 or 10,000 pc T&R


UQCS = 500 or 4000 pc T&R
UQCF = 500 or 4000 pc T&R

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

Also available in:

Not RoHS Compliant

179

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
ELECTRICAL SPECIFICATIONS
Temperature Characteristic Code A
Temperature Coefficient (TCC)
Capacitance Range
Operating Temperature
Quality Factor (Q)
Insulation Resistance (IR)

Working Voltage (WVDC)


Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift

(A) 0 30 PPM/C
(A) 0.1 pF to 1000 pF
0.1 pF to 1000 pF: from -55C to +125C
Greater than 2,000 at 1 MHz
0.1 pF to 1000 pF
105 Megohms min. @ 25C at rated WVDC
104 Megohms min. @ 125C at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
None
None
(0.02% or 0.02 pF), whichever is greater

ENVIRONMENTAL CHARACTERISTICS
AVX UQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Thermal Shock
Moisture Resistance
Low Voltage Humidity

Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat

8
180

Mil-STD-202, Method 107, Condition A


Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85C with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125C
200% WVDC
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
Case Size A
TABLE I: TC: A (030PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22

Cap. Tol.
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200

Cap. pF
430
470
510
560
620
680
750
820
910
1000

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
200
200
100
100
100
50
50
50
50
50

Cap. Tol.
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
51
56
62
68
75
82
91
100

Cap. Tol.
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M

WVDC
500
500
500
500
500
500
500
500

Case Size B
TABLE II: TC: A (030PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390

Case Size R
TABLE III: TC: A (030PPM/C)
Cap. pF
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M
G, J, K, M

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47

8
181

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
Case Size L
TABLE IV: TC: A (030PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5

Cap. Tol.
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D

WVDC
200
200
200
200
200
200
200
200
200
200
200
200
200
200

Cap. pF
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6

Cap. Tol.
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D

WVDC
200
200
200
200
200
200
200
200
200
200
200
200
200
200

Cap. pF
6.2
6.8
7.5
8.2
9.1
10
11
12
15
18
20
22
24
27

Cap. Tol.
A, B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
200
200
200
200
200
200
200
200
200
200
200
200
200
200

Case Size S
TABLE V:
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4

Cap. Tol.
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
15
18

Cap. Tol.
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Case Size F
TABLE VI:
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0

8
182

Cap. Tol.
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
15
18
20
22
24
27

Cap. Tol.
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
150
180
200
220
240

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
UQ CA ESR vs. Frequency

UQ CA FSR & FPR vs. Capacitance

8
183

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CB ESR vs. Frequency

UQ CB FSR & FPR vs. Capacitance

8
184

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CR ESR vs. Frequency

UQ CR Resonance Horizontal Orientation

8
185

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CL ESR vs. Frequency

UQ CL Resonance Frequency

8
186

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CS ESR vs. Frequency

UQ CS ESR vs. Frequency

8
187

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CS Q vs. Capacitance

UQ CS Resonant Frequency

8
188

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC

UQ CF ESR vs. Frequency

UQ CF Resonant Frequency

8
189

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
B
C

MOUNTING PAD DIMENSIONS CASE CA:


Vertical Mount
Horizontal Mount

inches (millimeters)

Pad Size

A min

B min

C min

D min

Normal
High Density
Normal
High Density

0.070 (1.778)
0.050 (1.270)
0.080 (2.032)
0.060 (1.524)

0.050 (1.270)
0.030 (0.762)
0.050 (1.270)
0.030 (0.762)

0.030 (0.762)
0.030 (0.762)
0.030 (0.762)
0.030 (0.762)

0.130 (3.302)
0.090 (2.286)
0.130 (3.302)
0.090 (2.286)

MOUNTING PAD DIMENSIONS CASE CB:

inches (millimeters)

Cap Value

Pad Size

A min

B min

C min

D min

0.1 pF

Normal
High Density
Normal
High Density
Normal
High Density
Normal
High Density
Normal
High Density

0.065 (1.651)
0.045 (1.143)
0.090 (2.286)
0.070 (1.778)
0.110 (2.794)
0.090 (2.286)
0.120 (3.048)
0.100 (2.540)
0.130 (3.302)
0.110 (2.794)

0.050 (1.270)
0.030 (0.762)
0.050 (1.270)
0.030 (0.762)
0.050 (1.270)
0.030 (0.762)
0.050 (1.270)
0.030 (0.762)
0.050 (1.270)
0.030 (0.762)

0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)
0.075 (1.905)

0.175 (4.445)
0.135 (3.429)
0.175 (4.445)
0.135 (3.429)
0.175 (4.445)
0.135 (3.429)
0.175 (4.445)
0.135 (3.429)
0.175 (4.445)
0.135 (3.429)

Vertical Mount

0.2 pF
0.3 to
510 pF
> 510 pF
All
Values

Horizontal Mount

MOUNTING PAD DIMENSIONS CASE CL, CS & CF:


W

L
T

8
190

Case

A min.

B min.

C min.

D min.

0402 (1005)

.0275
(0.70)
.0393
(1.00)
.0590
(1.50)

.0354
(0.90)
.0433
(1.10)
.0512
(1.30)

.0157
(0.40)
.03236
(0.60)
.0236
(0.60)

.0866
(2.20)
.110
(2.80)
.1259
(3.20)

0603 (1608)
D

inches (millimeters)

0805 (2012)

Microwave MLCs
UQ Series High Q Ultra Low ESR MLC
DESIGN KITS
Kit #

Compliance

KITUQ800LF
LEAD-FREE COMPATIBLE
COMPONENT

Description

Cap Value

UQCA 0605 Series Ultra-Low ESR


High Q Microwave Capacitors

0.1 to 2.0

KITUQ810LF
LEAD-FREE COMPATIBLE
COMPONENT

KITUQ820LF
LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

LEAD-FREE COMPATIBLE
COMPONENT

5%

100 to 1000 pF

100, 120, 150, 180, 200, 220, 240, 270, 300, 330,
390, 470
560, 680, 820, 1000

5%
10%

0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5

0.1

1.6, 1.8, 2.0

0.25

1.0 to 10

1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3
3.9, 4.7, 5.6, 6.8, 8.2
10

0.1
0.25
5%

10 to 27

10, 12, 15, 18, 20, 22, 24, 27

5%

0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5

0.1

0.1 to 2.0

0.1 to 2.0
1.6, 1.8, 2.0

0.25

1.0 to 10

1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3
3.9, 4.7, 5.6, 6.8, 8.2
10

0.1
0.25
5%

10 to 100

10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47,
56, 68, 82, 100

5%

0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5

0.1

1.6, 1.8, 2.0

0.25

1.0 to 10

1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3
3.9, 4.7, 5.6, 6.8, 8.2
10

0.1
0.25
5%

10 to 100

10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47,
56, 68, 82, 100

5%

100 to 240

100, 120, 150, 180, 200, 220, 250

5%

0.1 to 2.0

16 different values, 15 pcs min. per value

UQCF 0805 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ350LF

10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47, 56, 68,
82, 100

16 different values, 15 pcs min. per value

UQCF 0805 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ340LF

10 to 100 pF

16 different values, 15 pcs min. per value

UQCF 0805 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ330LF

0.1
0.25
5%

16 different values, 15 pcs min. per value

UQCF 0805 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ320LF

1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3
3.9, 4.7, 5.6, 6.8, 8.0
10

16 different values, 15 pcs min. per value

UQCS 0603 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ270LF

1.0 to 10 pF

16 different values, 15 pcs min. per value

UQCS 0603 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ260LF

5%

8 different values, 15 pcs min. per value

UQCS 0603 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ250LF

10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47, 56,
68, 82, 100

16 different values, 15 pcs min. per value

UQCL 0402 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ380LF

10 to 100 pF

16 different values, 15 pcs min. per value

UQCL 0402 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ370LF

0.1
0.25
5%

16 different values,15 pcs min. per value

UQCL 0402 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ360LF

1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3
3.9, 4.7, 5.6, 6.8, 8.0
10

16 different values,15 pcs min. per value

UQCB 1210 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ850LF

1.0 to 10 pF

16 different values,15 pcs min. per value

UQCB 1210 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ840LF

0.25

16 different values,15 pcs min. per value

UQCB 1210 Series Ultra-Low ESR


High Q Microwave Capacitors

KITUQ830LF

0.1

1.6, 1.8, 2.0

16 different values,15 pcs min. per value

UQCA 0605 Series Ultra-Low ESR


High Q Microwave Capacitors

Tol. (pF)

0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5

16 different values,15 pcs min. per value

UQCA 0605 Series Ultra-Low ESR


High Q Microwave Capacitors

Cap. Values (pF)

7 different values, 15 pcs min. per value

8
191

Microwave MLCs
SQ Series Ultra Low ESR MLC
FEATURES:

Low ESR
High Q
High Self Resonance
Capacitance Range 0.1 pF to 5100 pF
175C Capability SQCB

APPLICATIONS:

RF Power Amplifiers
Low Noise Amplifiers
Filter Networks
MRI Systems

HOW TO ORDER
SQ

AVX Style

CA

100

Case Size

Capacitance

CA = 0605
CB = 1210

EIA Capacitance Code in pF.


First two digits = significant
figures or R for decimal
place.

See mechanical
dimensions below

Voltage
Code
5 = 50V
1 = 100V
E = 150V
2 = 200V
V = 250V
9 = 300V
7 = 500V

Temperature
Coefficient Code

MECHANICAL DIMENSIONS:
L

1A = 7" Reel Unmarked


6A = Waffle Pack Unmarked
ME = 7" Reel Marked
WE = Waffle Pack Marked

A = Not
Applicable

Capacitance
Tolerance Code
B = .1 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%
N = 30%

1A
Packaging Code

Failure Rate
Code

Third digit = number of zeros


or after R significant figures.

M = +9020ppm/C
A = 030ppm/C
C = 15% (J Termination only)

* Vertical T&R available

Termination Style Code


**1 = Pd/Ag
**7 = Ag/Ni/Au
J = Nickel Barrier Sn/Pb
(60/40)
**T = 100% Tin
H = Cu/Sn (Non-Magnetic)

**RoHS compliant

inches (millimeters)

Case

Length (L)

Width (W)

Thickness (T)

Band Width (bw)

SQCA*

.055 + .015 - .010


(1.40+ .381 - .254)
.110 + .020 - .010
(2.79 +.508 -.254)

.055.015
(1.40.381)
.110.010
(2.79.254)

.020/.057
(.508/1.45)
.030/.102
(.762/2.59)

.010 + .010 -.005


(.254 +.254 -.127)
.015.010
(.381.254)

SQCB*
bw

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
8mm carrier
7" reel: SQCA/SQCB = 1000 pcs

Not RoHS Compliant

WAFFLE PACK
SQCA 100 pcs
SQCB 100 pcs
LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

8
192

Microwave MLCs
SQ Series Ultra Low ESR MLC
ELECTRICAL SPECIFICATIONS
M&A
Temperature Coefficient (TCC)

Capacitance Range
Operating Temperature
Quality Factor (Q) M Dielectric A & B Case
A Dielectric B Case

A Dielectric A Case
Insulation Resistance (IR)

Working Voltage (WVDC)


Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift

(M) +90 20 PPM/C ( -55C to +125C)


(M) +90 30 PPM/C ( +125C to +175C)*
(A)
0 30 PPM/C
(M) 0.1 pF to 1000 pF
(A) 0.1 pF to 5100 pF
0.1 pF to 330 pF: from -55C to +175C*
360 pF to 5100 pF: from -55C to +125C
Greater than 10,000 at 1 MHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
Greater than 2,000 at 1 KHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
0.2 pF to 470 pF
106 Megohms min. @ 25C at rated WVDC
105 Megohms min. @ 125C at rated WVDC
510 pF to 5100 pF
105 Megohms min. @ 25C at rated WVDC
104 Megohms min. @ 125C at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
(for 500V rated 150% of rated voltage)
None
None
(0.02% or 0.02 pF), whichever is greater

C
15% (-55C to 125C)

0.001F to 0.1F
-55C to +125C
2.5% @ 1kHz
0.1 - 200 pF
220 - 1000 pF
1100 - 5100 pF
0.1 - 100 pF
110 - 1000 pF
104 Megohms min. @ 25C at rated WVDC
103 Megohms min. @ 125C at rated WVDC

See Capacitance Values table


250% of rated WVDC for 5 secs
<3% per decade hour
None
Not Applicable

* 175 SQCB & SQLB only

ENVIRONMENTAL CHARACTERISTICS
AVX SQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity

Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat

Mil-STD-202, Method 107, Condition A


Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85C with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125C
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C

8
193

Microwave MLCs
SQ Series Available Capacitance/Size/WVDC/T.C.
Case Size A
TABLE I: TC: M (+9020PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

Cap. pF
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

Cap. pF
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24

Cap. Tol.
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

Cap. pF
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

Cap. pF
WVDC
150, 250 150
150, 250 160
150, 250 180
150, 250 200
150, 250 220
150, 250 240
150, 250 270
150, 250 300
150, 250 330
150, 250 360
150, 250 390
150, 250 430
150, 200 470
150, 200 510
150, 200 560
150, 200 620
150, 200 680
750
150
820
150
910
150
1000
150

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50

TABLE II: TC: A (030PPM/C)


Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

Cap. pF
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250
150, 250

TABLE III: TC: C (15%)


Cap. pF
1000
1200
1500
1800
2000

8
194

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
2200
2700
3300
3900
4700

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
5100
5600
6800
8200
10000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130

Microwave MLCs
SQ Series Available Capacitance/Size/WVDC/T.C.
Case Size B
TABLE IV: TC: M (+9020PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300

Cap. pF
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150

Cap. pF
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5000
5100

Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

WVDC
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

TABLE V: TC: A (030PPM/C)


Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43

Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K

TABLE VI: TC: C (15%)


Cap. pF
5000
6800
8200
10000
12000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
15000
18000
27000
33000
39000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
47000
68000
82000
100000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50

8
195

Microwave MLCs
SQ Series Ultra Low ESR MLC

Typical ESR SQCA


10

ESR (ohms)

1pF
4.7pF
10pF

0.1

22pF
100pF
0.01

0.001
10

100

1000

Frequency (Mhz)

Typical ESR SQCB

ESR (ohms)

4.7pF
10pF
22pF
100pF
1000pF

0.1

0.01

0.001
10

100

Frequency (Mhz)

8
196

1000

Microwave MLCs
SQ Series Ultra Low ESR MLC

SQCA Max Current

Max Current (amps)

10

1pF

4.7pF
10pF
22pF

0.1

100pF

0.01
10

100

1000

10000

Frequency (Mhz)

SQCB Max Current

Max Current (amps)

100

4.7pF
10pF
22pF
100pF
1000pF

10

0.1
10

100

1000

10000

Frequency (Mhz)

8
197

Microwave MLCs
SQ Series Ultra Low ESR MLC

Series Resonant Frequency

SRF (Mhz)

10000

SQCA
SQCB

1000

100
1

B
A

10
100
Capacitance (pF)

1000

MOUNTING PAD DIMENSIONS:

inches (millimeters)

Case

A min

B min

C min

D min

SQCA
SQCB
SQCS
SQCF

0.082 (2.083)
0.131 (3.327)
0.038 (0.965)
0.059 (1.499)

0.051 (1.295)
0.051 (1.295)
0.043 (1.092)
0.051 (1.295)

0.032 (0.813)
0.074 (1.880)
0.025 (0.635)
0.024 (0.610)

0.130 (3.302)
0.177 (4.496)
0.112 (2.845)
0.125 (3.175)

Diel

Term

Range

Different Values

# per value

P90
C0G
P90
C0G
P90
C0G

100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS

.1 to 2pF

16

15

1 to 10pF

16

15

10 to 100pF

16

15

100 to 1000pF

16

15

1 to 10pF

16

15

10 to 100pF

16

15

100 to 1000pF

16

15

1000 to 5100 pF

11

15

SQCA & SQCB DESIGN KITS


PN
KITSQ100LF
KITSQ400LF
KITSQ200LF
KITSQ500LF
KITSQ300LF
KITSQ600LF
KITSQ700LF
KITSQ800LF
KITSQ1100LF
KITSQ900LF
KITSQ1200LF
KITSQ1000LF
KITSQ1300LF
KITSQ1400LF

8
198

Series
SQCA
SQCA
SQCA
SQCA
SQCB
SQCB
SQCB
SQCB

C0G
P90
C0G
P90
C0G
P90
C0G
C0G

Microwave MLCs
SQCS (0603) SQCF (0805) Ultra Low ESR MLC
FEATURES:

Low ESR
High Q
High Self Resonance
Capacitance Range 0.1 pF to 240 pF
EIA Size

APPLICATIONS:

RF Power Amplifiers
Low Noise Amplifiers
Filter Networks
Point to Point Radios

HOW TO ORDER
SQ

CS

AVX Style

100

Case Size

Capacitance

CS = 0603
CF = 0805

EIA Capacitance Code in pF.


First two digits = significant
figures or R for decimal
place.
Third digit = number of zeros
or after R significant figures.

Voltage
Code
V = 250V

Temperature
Coefficient Code
A = 030ppm/C

Packaging Code

Failure Rate
Code

1A = 7" Reel Unmarked


ME = 7" Reel Marked

A = Not
Applicable

Capacitance
Tolerance Code
A = .05 pF
B = .1 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%

1A

* Vertical T&R available


* 500 piece reels available

Termination
Style Code
**1 = Pd/Ag
**7 = Ag/Ni/Au
J = Nickel Barrier
Sn/Pb (60/40)
**T = 100% Tin
(Standard)
**RoHS compliant

A 1J
10

MECHANICAL DIMENSIONS:

inches (millimeters)

Case

Length (L)

Width (W)

Thickness (T)

Band Width (bw)

SQCS

.063.006
(1.60.152)
.079.008
(2.01.200)

.032.006
(.813.152)
.049.008
(1.24.200)

.030 Max.
(.762)
.045 Max.
(1.14)

.014.006
(.357.152)
.014.006
(.357.152)

bw

SQCF

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
8mm carrier
7" reel = 4000 pcs (500 piece options)

Not RoHS Compliant

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

199

Microwave MLCs
Low ESR MLC Capacitors
ELECTRICAL SPECIFICATIONS
Temperature Coefficient (TCC)
Operating Temperature
Quality Factor (Q)
Insulation Resistance (IR)

Working Voltage (WVDC)


Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift

(A)
0 30 PPM/C
-55C to +125C
Greater than 10,000 at 1 MHz
0.1 pF to 240 pF
105 Megohms min. @ 25C at rated WVDC
104 Megohms min. @ 125C at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
None
None
(0.02% or 0.02 pF), whichever is greater

ENVIRONMENTAL CHARACTERISTICS
AVX SQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity

Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat

8
200

Mil-STD-202, Method 107, Condition A


Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85C with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125C
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C

Microwave MLCs
SQ Series Available Capacitance/Size/WVDC/T.C.
TABLE I: TC: A (030PPM/C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2

Cap. Tol.
A, B
A, B
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16

CASE SIZE S
Cap. Tol.
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J

TABLE II: TC: A (030PPM/C)


Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2

Cap. Tol.
A, B
A, B
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100

Cap. Tol.
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. Tol.
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

CASE SIZE F

Cap. Tol.
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J

WVDC
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

Cap. pF
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120

Cap. pF
150
180
200
220
240

Cap. Tol.
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J

WVDC
250
250
250
250
250

8
201

Microwave MLCs
SQCS (0603) SQCF (0805) Ultra Low ESR MLC

Typical ESR SQCS

ESR (ohms)

1pF
4.7pF
0.1

10pF
22pF
100pF

0.01
10

100

1000

Frequency (Mhz)

Typical ESR SQCF

ESR (ohms)

1
1pF

0.1

4.7pF
10pF

0.01

100pF
240pF

0.001
10

100
Frequency (Mhz)

8
202

1000

Microwave MLCs
SQCS (0603) SQCF (0805) Ultra Low ESR MLC

Max Current SQCS


Max Current (amps)

100

1pF

10

4.7pF
10pF
22pF

100pF

0.1
10

100

1000

10000

Frequency (Mhz)

Max Current SQCF

Max Current (amps)

100
1pF

10

4.7pF
10pF
100pF

240pF

0.1
10

100

1000

10000

Frequency (Mhz)

8
203

Microwave MLCs
SQCS (0603) SQCF (0805) Ultra Low ESR MLC

Series Resonant Frequency

SRF (Mhz)

100000

10000
SQCS
SQCF

1000

100
1

10

100

1000

Capacitance (pF)

B
A

MOUNTING PAD DIMENSIONS:

inches (millimeters)

Case

A min

B min

C min

D min

SQCA
SQCB
SQCS
SQCF

0.082 (2.083)
0.131 (3.327)
0.038 (0.965)
0.059 (1.499)

0.051 (1.295)
0.051 (1.295)
0.043 (1.092)
0.051 (1.295)

0.032 (0.813)
0.074 (1.880)
0.025 (0.635)
0.024 (0.610)

0.130 (3.302)
0.177 (4.496)
0.112 (2.845)
0.125 (3.175)

SQCS & SQCF ENGINEERING KITS


PN
Kit
Kit
Kit
Kit

SQ1800LF
SQ1900LF
SQ1500LF
SQ1600LF

Series

Diel

SQCF

C0G

SQCS

C0G

Term

Range

Different Values

100% Tin
RoHS
100%Tin
RoHS

.1 to 10pF
10 to 240pF
.1 to 10pF
10 to 100pF

27
22
27
16

Tolerance per PF:


B from .1 to 3.3
J from 10 to 240
C from 3.9 to 8.2

8
204

# per value
15

15

MK Series Capacitors
Ultra Low ESR, C0G (NP0) Chip Capacitors
GENERAL INFORMATION
Capacitors are C0G (NP0) chip capacitors specially designed
for Ultra low ESR for applications in the communications
market. Max ESR and effective capacitance are met on each
value producing lot to lot uniformity. Sizes available are EIA
chip sizes 0402, 0603, 0805, and 1210.

DIMENSIONS: inches (millimeters)


0402

0603

0805

1210
A

A
C

A
C

B
D

E D
D

Size

0402
0603
0805
1210

0.0390.004
0.0600.010
0.0790.008
0.1260.008

B
(1.000.1)
(1.520.25)
(2.010.2)
(3.20.2)

0.0200.004
0.0300.010
0.0490.008
0.0980.008

(0.500.1)
(0.760.25)
(1.250.2)
(2.490.2)

inches (mm)
E

0.024 (0.6) max


0.036 (0.91) max
0.0400.005 (1.020.127)
0.0500.005 (1.270.127)

N/A
0.0100.005 (0.250.13)
0.0200.010 (0.510.254)
0.0250.015 (0.6350.381)

N/A
0.030 (0.76) min
0.020 (0.51) min
0.040 (1.02) min

HOW TO ORDER
MK05

Case Size

100

Dielectric =
Ultra Low
ESR

MK02 = 0402
MK03 = 0603
MK05 = 0805
MK10 = 1210

Capacitance
Tolerance
Code
B = 0.1pF
C = 0.25pF
D = 0.5pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

Voltage Code
3 = 25V
5 = 50V
1 = 100V
2 = 200V
V = 250V
7 = 500V

Capacitance
EIA Capacitance Code in pF.
First two digits = significant figures
or R for decimal place.
Third digit = number of zeros or
after R significant figures.

Termination

Special Code

T = 100% Tin

A = Standard

Failure Rate
Code

Packaging
Code

A = Not Applicable

2 = 7" Reel
4 = 13" Reel
9 = Bulk

LEAD-FREE COMPATIBLE
COMPONENT

8
205

MK Series Capacitors
Ultra Low ESR, C0G (NP0) Chip Capacitors
ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
Size
Size
Size
Size

MK02
MK03
MK05
MK10

0.2
0.2
1.0
1.0

pF
pF
pF
pF

to
to
to
to

Dielectric Working Voltage (DWV):

30 pF @ 1 MHz
120 pF @ 1 MHz
160 pF @ 1 MHz
1000 pF @ 1 MHz

250% of rated WVDC

Equivalent Series Resistance Typical (ESR):


MK02
MK03
MK05
MK10

Temperature Coefficient of Capacitance (TC):


030 ppm/C (-55 to +125C)

Insulation Resistance (IR):

Performance
Performance
Performance
Performance

Curve,
Curve,
Curve,
Curve,

page
page
page
page

207
207
207
207

Meets or exceeds the requirements


of MIL-C-55681

Working Voltage (WVDC):


-

See
See
See
See

MILITARY SPECIFICATIONS

1012 min. @ 25C and rated WVDC


1011 min. @ 125C and rated WVDC
Size
MK02
MK03
MK05
MK10

Working Voltage
50, 25 WVDC
250, 200, 100, 50 WVDC
250 WVDC
500, 200, 100 WVDC

CAPACITANCE RANGE

200

100V

100V

N/A

F,G,J,K,M

N/A

F,G,J,K,M N/A 100V 250V 500V


50V
50V
N/A

B,C,J,K,M
F,G,J,K,M

100
110
120
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

LEAD-FREE COMPATIBLE
COMPONENT

8
206

B,C,J,K,M 50V 250V 250V 500V

B,C,D
B,C,J,K,M

7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91

50V 250V 250V 500V

B,C,D

B,C,D

B,C
B,C,D

1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8

Size
Available
Cap (pF) Tolerance MK02 MK03 MK05 MK10

50V 250V N/A N/A

Size
Available
Cap (pF) Tolerance MK02 MK03 MK05 MK10

B,C

0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9

Size
Available
Cap (pF) Tolerance MK02 MK03 MK05 MK10

Size
Available
Cap (pF) Tolerance MK02 MK03 MK05 MK10

MK Series Capacitors
Ultra Low ESR, C0G (NP0) Chip Capacitors
MK02 ESR vs Frequency
0402

MK02 Q vs Frequency
0402
10000

22 pF
10 pF

100

5.1 pF
1.2 pF

ESR (Ohms)

1000
22 pF
10 pF

0.1

5.1 pF
1.2 pF

10

0.01
125

250

500

1000

2500

5000

125

250

500

1000

2500

MHz

MHz

MK03 Q vs Frequency
0603

MK03 ESR Vs Frequency


0603

5000

10000

10 pF
100

2.2 pF
1.2 pF

ESR (Ohms)

1000
10 pF
0.1

2.2 pF
1.2 pF

10

0.01
125

250

500

1000

2500

5000

125

250

500

1000

2500

MHz

MHz

MK05 Q vs Frequency
0805

MK05 ESR vs Frequency


0805

10000

5000

100 pF
100

10 pF
1.2 pF

ESR (Ohms)

1000
100 pF
0.1

10 pF
1.2 pF

10

0.01
125

250

500

1000

2500

5000

125

250

500

1000

2500

MHz

MHz

MK10 Q vs Frequency
1210

MK10 ESR vs Frequency


1210

5000

10000

100 pF
100

10 pF
1.2 pF

ESR (Ohms)

1000
100 pF
0.1

10 pF
1.2 pF

10

0.01
125

250

500

1000
MHz

2500

5000

125

250

500

1000

2500

5000

MHz

207

Microwave MLCs
AQ Series
These porcelain and ceramic dielectric multilayer capacitor
(MLC) chips are best suited for RF/ Microwave applications
typically ranging from 10 MHz to 4.2 GHz. Characteristic is a
fine grained, high density, high purity dielectric material impervious to moisture with heavy internal palladium electrodes.
These characteristics lend well to applications requiring:
1) high current carrying capabilities;
2) high quality factors;
3) very low equivalent series resistance;
4) very high series resonance;
5) excellent stability under stresses of changing voltage, frequency, time and temperature.

MECHANICAL DIMENSIONS:
L

A 1J
10

Case

Length (L)

Width (W)

Thickness (T)

Band Width (bw)

AQ11

.055.015
(1.40.381)
.055 + .015 - .010
(1.40+ .381 - .254)
.110.020
(2.79.508)
.110 + .020 - .010
(2.79 +.889 -.254)

.055.015
(1.40.381)
.055.015
(1.40.381)
.110.020
(2.79.508)
.110.010
(2.79.508)

.020/.057
(.508/1.45)
.020/.057
(.508/1.45)
.030/.102
(.762/2.59)
.030/.102
(.762/2.59)

.010 + .010 -.005


(.254 +.254 -.127)
.010 + .010 -.005
(.254 +.254 -.127)
.015.010
(.381.254)
.015.010
(.381.254)

AQ12
AQ13

bw

inches (millimeters)

AQ14

HOW TO ORDER
AQ

11

(See Chart)

AQ11, AQ12,
AQ13, AQ14

Capacitance

Case
Size
AVX Style

100

Voltage
Code
5 = 50V
1 = 100V
E = 150V
2 = 200V
9 = 300V
7 = 500V

EIA Capacitance Code in pF.


First two digits = significant
figures or R for decimal
place.
Third digit = number of zeros
or after R significant figures.

Temperature
Coefficient Code
M = +9020ppm/C (AQ11/12/13/14)
A = 030ppm/C (AQ11/12/13/14)
C = 15% (J Termination only) (AQ12/14)

PACKAGING

Capacitance
Tolerance
Code
B = .1 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%
N = 30%

Standard Packaging = Waffle Pack (maximum quantity is 80)

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).

Sizes SQCA through SQCB, CDR11/12 through 13/14.

8mm carrier
7" reel: 0.040" thickness = 2000 pcs
0.075" thickness = 2000 pcs
13" reel: 0.075" thickness = 10,000 pcs

208

ME

Failure Rate
Code

Packaging*
Code

A = Not
Applicable

3A = 13" Reel Unmarked


ME = 7" Reel Marked
RE = 13" Reel Marked
WE = Waffle Pack Marked
BE = Bulk Marked

Termination
Style Code
1 = Pd/Ag (AQ11/13 only)
7 = Ag/Ni/Au (AQ11/13 only)
J = Nickel Barrier Sn/Pb
(60/40) - (AQ12/14 only)
T = 100% Tin (AQ12/14 only)

Not RoHS Compliant

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

Microwave MLCs
AQ Series
ELECTRICAL SPECIFICATIONS
AQ11, AQ12, AQ13, AQ14
M&A
Temperature Coefficient (TCC)

Capacitance Range
Operating Temperature
Quality Factor (Q) M Dielectric A & B Case
A Dielectric B Case

A Dielectric A Case
Insulation Resistance (IR)

Working Voltage (WVDC)


Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift

(M) +90 20 PPM/C ( -55C to +125C)


(M) +90 30 PPM/C ( +125C to +175C)
(A)
0 30 PPM/C
(M) 0.1 pF to 1000 pF
(A) 0.1 pF to 5100 pF
0.1 pF to 330 pF: from -55C to +175C
360 pF to 5100 pF: from -55C to +125C
Greater than 10,000 at 1 MHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
Greater than 2,000 at 1 KHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
0.1 pF to 470 pF
106 Megohms min. @ 25C at rated WVDC
105 Megohms min. @ 125C at rated WVDC
510 pF to 5100 pF
105 Megohms min. @ 25C at rated WVDC
104 Megohms min. @ 125C at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
(for 500V rated 150% of rated voltage)
None
None
(0.02% or 0.02 pF), whichever is greater

C
15% (-55C to 125C)

0.001F to 0.1F
-55C to +125C
2.5% @ 1kHz
0.1 - 200 pF
220 - 1000 pF
1100 - 5100 pF
0.1 - 100 pF
110 - 1000 pF
104 Megohms min. @ 25C at rated WVDC
103 Megohms min. @ 125C at rated WVDC

See Capacitance Values table


250% of rated WVDC for 5 secs
<3% per decade hour
None
Not Applicable

ENVIRONMENTAL CHARACTERISTICS
AVX SQLB will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity

Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat

Mil-STD-202, Method 107, Condition A


Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85C with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125C
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C

8
209

Microwave MLCs
AQ Series Available Capacitance/Size/WVDC/T.C.
TABLE I: TC: M (+9020PPM/C)
CASE SIZE 11, 12, 13 & 14
Case

Length

Width

Thickness

Band Width

Avail. Term.

11
12
13
14

.055.015 (1.40.381)
.055.025 (1.40.635)
.110.020 (2.79.508)
.110 +0.035 -0.020 (2.79 +.889 -.508)

.055.015 (1.40.381)
.055.015 (1.40.381)
.110.020 (2.79.508)
.110.020 (2.79.508)

.020/.057 (.508/1.45)
.020/.057 (.508/1.45)
.030/.102 (.762/2.59)
.030/.102 (.762/2.59)

.010 +.010 -.005 (.254 +.254 -.127)


.010 +.010 -.005 (.254 +.254 -.127)
.015.010 (.381.254)
.015.010 (.381.254)

1& 7
J
1& 7
J

Case: AQ11, AQ12

DIMENSIONS: inches (millimeters)

Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100

210

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150

Case: AQ13, AQ14


Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91

Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

Cap. pF
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

WVDC
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150

Microwave MLCs
AQ Series Available Capacitance/Size/WVDC/T.C.
TABLE II: TC: A (030PPM/C)
CASE SIZE 11, 12, 13 & 14

DIMENSIONS: inches (millimeters)

Case

Length

Width

Thickness

Band Width

Avail. Term.

11
12
13
14

.055.015 (1.40.381)
.055.025 (1.40.635)
.110.020 (2.79.508)
.110 +0.035 -0.020 (2.79 +.889 -.508)

.055.015 (1.40.381)
.055.015 (1.40.381)
.110.020 (2.79.508)
.110.020 (2.79.508)

.020/.057 (.508/1.45)
.020/.057 (.508/1.45)
.030/.102 (.762/2.59)
.030/.102 (.762/2.59)

.010 +.010 -.005 (.254 +.254 -.127)


.010 +.010 -.005 (.254 +.254 -.127)
.015.010 (.381.254)
.015.010 (.381.254)

1& 7
J
1& 7
J

Case: AQ13, AQ14

Case: AQ11, AQ12


Cap. pF

Cap. Tol.

WVDC

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22

B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150

Cap. pF

24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

Cap. Tol.

WVDC

Cap. pF

Cap. Tol.

WVDC

Cap. pF

Cap. Tol.

WVDC

F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47

B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500

51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5000
5100

F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

TABLE III: TC: C (15%)

CASE SIZE 12 & 14

Case: AQ12
Cap. pF
1000
1200
1500
1800
2000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
2200
2700
3300
3900
4700

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Case: AQ14
Cap. pF
5100
5600
6800
8200
10000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
5000
6800
8200
10000
12000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
15000
18000
27000
33000
39000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50
50

Cap. pF
47000
68000
82000
100000

Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N

WVDC
50
50
50
50

211

Microwave MLCs
CDR Series MIL-PRF-55681 (RF/Microwave Chips)
MILITARY DESIGNATION PER MIL-PRF-55681
L

W
L

A 0J
47

0J

10

bw

bw

CDR11/12

CDR13/14

CROSS REFERENCE: AVX/MIL-PRF-55681


Per MIL-C-55681

AVX
Style

Length (L)

Width (W)

Thickness (T)
Max
Min

CDR11

AQ11

CDR12

AQ12

CDR13

AQ13

CDR14

AQ14

.055.015
(1.40.381)
.055.025
(1.40.635)
.110.020
(2.79.508)
.110 +.035 -0.020
(2.79 +.889 -.508)

.055.015
(1.40.381)
.055.015
(1.40.381)
.110.020
(2.79.508)
.110.020
(2.79.508)

.057
(1.45)
.057
(1.45)
.102
(2.59)
.102
(2.59)

Termination Band (bw)


Max
Min

.020
(.508)
.020
(.508)
.030
(.762)
.030
(.762)

.020
(.508)
.020
(.508)
.025
(.635)
.025
(.635)

.005
(.127)
.005
(.127)
.005
(.127)
.005
(.127)

HOW TO ORDER
CDR12

BG

101

MIL Style

Capacitance

CDR11, CDR12,
CDR13, CDR14

EIA Capacitance Code in pF.


First two digits = significant figures
or R for decimal place.
Third digit = number of zeros or
after R significant figures.

Voltage
Temperature
Limits
BG = +9020 ppm/C with and without
rated voltage from -55C to + 125C
BP = 030ppm/C with and without
rated voltage from -55C to +125C

Rated Voltage
Code
A = 50V
B = 100V
C = 200V
D = 300V
E = 500V

Capacitance
Tolerance Code

Failure Rate
Level

B = .1 pF
C = .25 pF
D = .5 pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

M = 1.0%
P = .1%
R = .01%
S = .001%

PACKAGING
Standard Packaging Quanity
CDR11-12 = 100 pcs per waffle pack
CDR13-14 = 80 pcs per waffle pack

TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481

Termination
Finish (Military
Designations)
Code

M = Palladium silver
N = Silver-nickel-gold
S = Solder coated final with a minimum of
4 percent lead
T = Silver
U = Base metallization-barrier metal-solder coated
(tin/lead alloy, with a minimum of 4 percent lead)
W = Base metallization-barrier metal-tinned (tin or
tin/lead alloy)
Y = Base metallization-barrier metal-tin (100 percent)
Z = Base metallization-barrier metal-tinned
(tin/lead alloy, with a minimum of 4 percent lead)
*See MIL-PRF-55681 Specification for more details

Not RoHS Compliant

(equivalent to IEC 286 part 3).

Sizes SQCA through SQCB, CDR11/12 through 13/14.

8mm carrier
7" reel: 0.040" thickness = 2000 pcs
0.075" thickness = 2000 pcs
13" reel: 0.075" thickness = 10,000 pcs

212

LEAD-FREE COMPATIBLE
COMPONENT

For RoHS compliant products,


please select correct termination style.

Microwave MLCs
CDR Series MIL-PRF-55681 (RF/Microwave Chips)
TABLE I: STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS
Type
Designation
1/

Capacitance
in pF

Capacitance
tolerance

Rated temperature
and
V/Temperature

WVDC

CDR1 -B-0R1AB-CDR1 -B-0R2AB-CDR1 -B-0R3A--CDR1 -B-0R4A--CDR1 -B-0R5A--CDR1 -B-0R6A--CDR1 -B-0R7A--CDR1 -B-0R8A--CDR1 -B-0R9A--CDR1 -B-1R0A--CDR1 -B-1R1A--CDR1 -B-1R2A--CDR1 -B-1R3A--CDR1 -B-1R4A--CDR1 -B-1R5A--CDR1 -B-1R6A--CDR1 -B-1R7A--CDR1 -B-1R8A--CDR1 -B-1R9A--CDR1 -B-2R0A--CDR1 -B-2R1A--CDR1 -B-2R2A--CDR1 -B-2R4A--CDR1 -B-2R7A--CDR1 -B-3R0A--CDR1 -B-3R3A--CDR1 -B-3R6A--CDR1 -B-3R9A--CDR1 -B-4R3A--CDR1 -B-4R7A--CDR1 -B-5R1A--CDR1 -B-5R6A--CDR1 -B-6R2A--CDR1 -B-6R8A--CDR1 -B-7R5A--CDR1 -B-8R2A--CDR1 -B-9R1A--CDR1 -B-100A--CDR1 -B-110A--CDR1 -B-120A--CDR1 -B-130A--CDR1 -B-150A--CDR1 -B-160A--CDR1 -B-180A--CDR1 -B-200A--CDR1 -B-220A--CDR1 -B-240A--CDR1 -B-270A---

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27

B
B
B, C
B, C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP

50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

Type
Designation
1/
CDR1 -B-300A--CDR1 -B-330A--CDR1 -B-360A--CDR1 -B-390A--CDR1 -B-430A--CDR1 -B-470A--CDR1 -B-510A--CDR1 -B-560A--CDR1 -B-620A--CDR1 -B-680A--CDR1 -B-750A--CDR1 -B-820A--CDR1 -B-910A--CDR1 -B-101A--CDR1 -B-111A--CDR1 -B-121A--CDR1 -B-131A--CDR1 -B-151A--CDR1 -B-161A--CDR1 -B-181A--CDR1 -B-201A--CDR1 -B-221A--CDR1 -B-241A--CDR1 -B-271A--CDR1 -B-301A--CDR1 -B-331A--CDR1 -B-361A--CDR1 -B-391A--CDR1 -B-431A--CDR1 -B-471A--CDR1 -B-511A--CDR1 -B-561A--CDR1 -B-621A--CDR1 -B-681A--CDR1 -B-751A--CDR1 -B-821A--CDR1 -B-911A--CDR1 -B-102A---

Capacitance
in pF
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

Capacitance
tolerance

Rated temperature
and
V/Temperature

WVDC

F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP

50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

1/Complete type designation will include additional symbols to indicate style,


voltage-temperature limits, capacitance tolerance (where applicable), termination finish (M or N for style CDR11, and S, U, W, Y or Z for style
CDR12) and failure rate level.

8
213

Microwave MLCs
CDR Series MIL-PRF-55681 (RF/Microwave Chips)
TABLE II: STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS
Type
Designation
1/
CDR1 -B-0R1*B-CDR1 -B-0R2*B-CDR1 -B-0R3*--CDR1 -B-0R4*--CDR1 -B-0R5*--CDR1 -B-0R6*--CDR1 -B-0R7*-CDR1 -B-0R8*--CDR1 -B-0R9*--CDR1 -B-1R0*--CDR1 -B-1R1*--CDR1 -B-1R2*--CDR1 -B-1R3*--CDR1 -B-1R4*--CDR1 -B-1R5*--CDR1 -B-1R6*--CDR1 -B-1R7*--CDR1 -B-1R8*--CDR1 -B-1R9*--CDR1 -B-2R0*--CDR1 -B-2R1*--CDR1 -B-2R2*-CDR1 -B-2R4*--CDR1 -B-2R7*--CDR1 -B-3R0*--CDR1 -B-3R3*--CDR1 -B-3R6*--CDR1 -B-3R9*--CDR1 -B-4R3*--CDR1 -B-4R7*--CDR1 -B-5R1*--CDR1 -B-5R6*--CDR1 -B-6R2*--CDR1 -B-6R8*--CDR1 -B-7R5*--CDR1 -B-8R2*--CDR1 -B-9R1*--CDR1 -B-100*--CDR1 -B-110*--CDR1 -B-120*--CDR1 -B-130*--CDR1 -B-150*--CDR1 -B-160*--CDR1 -B-180*--CDR1 -B-200*--CDR1 -B-220*--CDR1 -B-240*--CDR1 -B-270*--CDR1 -B-300*--CDR1 -B-330*--CDR1 -B-360*--CDR1 -B-390*--CDR1 -B-430*--CDR1 -B-470*--CDR1 -B-510*---

Capacitance
in pF

Capacitance
tolerance

Rated temperature
and
V/Temperature

WVDC

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51

B
B
B, C
B, C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP

200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/500

Type
Designation
1/
CDR1 -B-560*--CDR1 -B-620*--CDR1 -B-680*--CDR1 -B-750*--CDR1 -B-820*--CDR1 -B-910*--CDR1 -B-101*--CDR1 -B-111--CDR1 -B-121--CDR1 -B-131--CDR1 -B-151--CDR1 -B-161--CDR1 -B-181--CDR1 -B-201--CDR1 -B-221C--CDR1 -B-241C--CDR1 -B-271C--CDR1 -B-301C--CDR1 -B-331C--CDR1 -B-361C--CDR1 -B-391C--CDR1 -B-431C--CDR1 -B-471C--CDR1 -B-511B--CDR1 -B-561B--CDR1 -B-621B--CDR1 -B-681A--CDR1 -B-751A--CDR1 -B-821A--CDR1 -B-911A--CDR1 -B-102A--CDR1 -B-112A--CDR1 -B-122A--CDR1 -B-132A--CDR1 -B-152A--CDR1 -B-162A--CDR1 -B-182A--CDR1 -B-202A--CDR1 -B-222A--CDR1 -B-242A--CDR1 -B-272A--CDR1 -B-302A--CDR1 -B-332A--CDR1 -B-362A--CDR1 -B-392A--CDR1 -B-432A--CDR1 -B-472A--CDR1 -B-502A--CDR1 -B-512A---

214

56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5000
5100

Capacitance
tolerance

Rated temperature
and
V/Temperature

WVDC

F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M

BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BG, BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP

200/500
200/500
200/500
200/500
200/500
200/500
200/500
200/300
200/300
200/300
200/300
200/300
200/300
200/300
200
200
200
200
200
200
200
200
200
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

1/Complete type designation will include additional symbols to indicate style,


voltage-temperature limits, capacitance tolerance (where applicable), termination finish (M or N for style CDR13, and S, U, W, Y or Z for style
CDR14) and failure rate level.
*C=200V; E=500V.
C=200V; D=300V.

Capacitance
in pF

Microwave MLCs
Performance Curves
TYPICAL Q vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BG
STANDARD - M

TYPICAL ESR vs. FREQUENCY


AQ11/12
MIL-PRF-55681E - BG
STANDARD - M

10000

1000

ESR (ohms) 0.1

100

10

0.01
100

1000

100

Frequency (MHz)

1 Picofarad

AVX CORPORATION
10 Picofarad

1000
Frequency (MHz)

100 Picofarad

3.3 Picofarad

AVX CORPORATION
10 Picofarad

100 Picofarad

TYPICAL ESR vs. CAPACITANCE


AQ11/12
MIL-PRF-55681E - BG
STANDARD - M

TYPICAL Q vs. CAPACITANCE


AQ11/12
MIL-PRF-55681E - BG
STANDARD - M
1

10000

1000

ESR (ohms) 0.1

100

10

10

100

0.01
1

250 MHz

AVX CORPORATION
500 MHz

10

100

Capacitance (pF)

Capacitance (pF)

1000 MHz

250 MHz

AVX CORPORATION
500 MHz

1000 MHz

8
215

Microwave MLCs
Performance Curves
TYPICAL Q vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BG
STANDARD - M

10000

TYPICAL ESR vs. FREQUENCY


AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
1

1000

ESR (ohms) 0.1

100

10

100

1000

0.01

100

Frequency (MHz)
AVX CORPORATION
10 Picofarad
47 Picofarad

1 Picofarad

1000
Frequency (MHz)

330 Picofarad

TYPICAL Q vs. CAPACITANCE


AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
10000

1 Picofarad

AVX CORPORATION
15 Picofarad

100 Picofarad

TYPICAL ESR vs. CAPACITANCE


AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
1

1000

ESR (ohms) 0.1

100

10

10

100

0.01
1

Capacitance (pF)

250 MHz

8
216

AVX CORPORATION
500 MHz

10

100

Capacitance (pF)
1000 MHz

250 MHz

AVX CORPORATION
500 MHz

1000 MHz

Microwave MLCs
Performance Curves
TYPICAL ESR vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BP
STANDARD - A

TYPICAL Q vs. FREQUENCY


AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
1

10000

1000

ESR (ohms) 0.1

100

10

0.01
100

1000

100

Frequency (MHz)

1 Picofarad

AVX CORPORATION
15 Picofarad

1000
Frequency (MHz)

100 Picofarad

TYPICAL Q vs. CAPACITANCE


AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
10000

1 Picofarad

AVX CORPORATION
15 Picofarad

100 Picofarad

TYPICAL ESR vs. CAPACITANCE


AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
1

1000

ESR (ohms) 0.1

100

10

10

100

0.01
1

Capacitance (pF)

250 MHz

AVX CORPORATION
500 MHz

10

100

Capacitance (pF)

1000 MHz

250 MHz

AVX CORPORATION
500 MHz

1000 MHz

8
217

Microwave MLCs
Performance Curves
TYPICAL ESR vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BP
STANDARD - A

TYPICAL Q vs. FREQUENCY


AQ13/14
MIL-PRF-55681E - BP
STANDARD - A

10000

1000

ESR (ohms) 0.1

100

10

0.01
100

1000

100

2 Picofarad

AVX CORPORATION
15 Picofarad

1000
Frequency (MHz)

Frequency (MHz)

100 Picofarad

15 Picofarad

TYPICAL Q vs. CAPACITANCE


AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
10000

AVX CORPORATION
47 Picofarad

100 Picofarad

TYPICAL ESR vs. CAPACITANCE


AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
1

1000

ESR (ohms) 0.1

100

10

10

100

0.01
1

Capacitance (pF)

250 MHz

8
218

AVX CORPORATION
500 MHz

10

100

Capacitance (pF)

1000 MHz

250 MHz

AVX CORPORATION
500 MHz

1000 MHz

Microwave MLCs
Performance Curves

TYPICAL RESONANT FREQUENCY vs. CAPACITANCE


AVX AQ11-14 (CDR11-14)
10
AQ11/12
AQ13/14
Parallel Resonant
Frequency

Frequency (GHz)

AQ11/12
AQ13/14
1.0

Series Resonant
Frequency

0.1
1.0

100

10

1000

Capacitance (pF)

TYPICAL RESONANT FREQUENCY vs. CAPACITANCE


AVX 0603

Frequency (GHz)

10

Parallel Resonant
Frequency
1.0
Series Resonant
Frequency

0.1

100

10

1000

Capacitance (pF)

8
219

Microwave MLCs
Automatic Insertion Packaging
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
Sizes SQCA through SQCB, CDR11/12 through 13/14.

U Series - 402/0603/0805/1210 Size Chips

8mm carrier
7" reel: 0.040" thickness = 2000 pcs
0.075" thickness = 2000 pcs
13" reel: 0.075" thickness = 10,000 pcs

8mm carrier
7" reel: 0402 = 10,000 pcs
0603 & 0805 0.40" thickness = 4000 pcs
0805 . 0.040" thickness & 1210 = 2000 pcs
13" reel: 0.075" thickness = 10,000 pcs

REEL DIMENSIONS: millimeters (inches)

Tape
A
Size(1) Max.

B*
Min.

D*
N
Min. Min.

8mm
330
1.5 13.00.20 20.2 50
(12.992) (.059) (.512.008) (.795) (1.969)

W1

W2
Max.

W3

7.9 Min.
1.0
8.4 +-0.0
14.4
(.311)
(.331 +.060
-0.0 ) (.567) 10.9 Max.
(.429)
11.9 Min.
12.4 +2.0
-0.0
18.4
(.469)
+.076
(.488 -0.0 ) (.724) 15.4 Max.
(.607)

12mm

Metric dimensions will govern.


English measurements rounded and for reference only.
(1) For tape sizes 16mm and 24mm (used with chip size 3640) consult EIA RS-481 latest revision.

EMBOSSED CARRIER CONFIGURATION


8 & 12 MM TAPE ONLY
CONSTANT DIMENSIONS
Tape
Size

D0

8mm
and
12mm

+0.10
8.4 -0.0
(.059 +.004
-0.0 )

1.75 0.10
(.069 .004)

P0

P2

T
Max.

T1

G1

G2

4.0 0.10
2.0 0.05 0.600 0.10 0.75 0.75
(.157 .004) (.079 .002) (.024) (.004) (.030) (.030)
Max. Min. Min.
See
Note 3

See
Note 4

VARIABLE DIMENSIONS
Tape Size

8mm
12mm

B1
Max.

D1
Min.

See Note 6

See Note 5

4.55
(.179)
8.2
(.323)

1.0
(.039)
1.5
(.059)

P1

R
Min.

3.5 0.05
(.138 .002)
5.5 0.05
(.217 .002)

4.0 0.10
(.157 .004)
4.0 0.10
(.157 .004)

T2

A0B0K0

2.5 Max
(.098)
6.5 Max
(.256)

8.0 +0.3
-0.1
(.315 +.012
-.004 )
12.0 .30
(.472 .012)

See Note 1

See Note 2

25
(.984)
30
(1.181)

See Note 1

NOTES:
1. A0, B0, and K0 are determined by the max. dimensions to the ends of the
terminals extending from the component body and/or the body dimensions of
the component. The clearance between the end of the terminals or body of the
component to the sides and depth of the cavity (A0, B0, and K0) must be within
0.05 mm (.002) min. and 0.50 mm (.020) max. The clearance allowed must also
prevent rotation of the component within the cavity of not more than 20 degrees
(see sketches C & D).
2. Tape with components shall pass around radius R without damage. The
minimum trailer length (Note 2 Fig. 3) may require additional length to provide R
min. for 12mm embossed tape for reels with hub diameters approaching N min.
(Table 4).

8
220

3. G1 dimension is the flat area from the edge of the sprocket hole to either the
outward deformation of the carrier tape between the embossed cavities or to
the edge of the cavity whichever is less.
4. G2 dimension is the flat area from the edge of the carrier tape opposite the
sprocket holes to either the outward deformation of the carrier tape between the
embossed cavity or to the edge of the cavity whichever is less.
5. The embossment hole location shall be measured from the sprocket hole
controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
6. B1 dimension is a reference dimension for tape feeder clearance only.

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications
PRODUCT OFFERING
Hi-Q, high RF power, surface mount MLC capacitors from AVX
Corporation are characterized with ultra-low ESR and dissipation factor
at high frequencies. They are designed to handle high power and
high voltage levels for applications in RF power amplifiers, inductive
heating, high magnetic field environments (MRI coils), medical and
industrial electronics.

HOW TO ORDER
HQCC

AVX
Style
HQCC
HQCE
HQLC
HQLE

Voltage
300V = 9
500V = 7
800V = U
1000V = A
1500V = S
2500V = W
3000V = H
3600V = J
5000V = K
7200V = M

Temperature
Coefficient
C0G = A
P90 = M

DIMENSIONS

271

Capacitance Code
Capacitance
(2 significant digits
Tolerance
+ no. of zeros)
B = 0.1pf (<8.2pF)
Examples:
C = 0.25pF (<8.2pF)
4.7 pF = 4R7
D = 0.50pF (<8.2pF)
10 pF = 100
F = 1% (10pF)
100 pF = 101
G = 2%
1,000 pF = 102
J = 5%
K = 10%
M = 20%

Test Level
A = Standard

Termination*
Packaging
T = Plated Ni and Sn
1A = 7" Reel*
(RoHS Compliant)
6A = Waffle Pack
J = 5% Min Pb
7 = Plated Ni and Au
*HQCC & HQCE
A = Axial Ribbon
only
M = Microstrip
H = Cu/Sn (Non-Magnetic)
4 = Axial Ribbon (Non-Magnetic)
5 = Microstrip (Non-Magnetic)

MICROSTRIP

millimeters (inches)

WL

W
L

WL

HQCC
5.84 +0.51 -0.25
(0.230 +0.020 -0.010)
6.35 0.38
(0.250 0.015)
3.68 (0.145) max. for
capacitance values 680pF

W
L

HQCE
9.65 +0.38 -0.25
(0.380 +0.015 -0.010)
9.65 0.25
(0.380 0.010)

4.19 (0.165) max. for


capacitance values > 680pF
(Y) Overlap

TL

LL

(T) Thickness
Max.

AXIAL RIBBON

(W) Width

TL

LL

STYLE
(L) Length

1A

1.20 (0.040) max.

4.32 (0.170) max.

1.02 (0.040) max.

Not RoHS Compliant

LEAD-FREE COMPATIBLE
COMPONENT

STYLE
(L) Length
(W) Width
(T) Thickness
Max.

HQLC
6.22 0.64
(0.245 0.025)
6.35 0.38
(0.250 0.015)
3.68 (0.145) max. for
capacitance values 680pF
4.19 (0.165) max. for
capacitance values 680pF

HQLE
9.65 +0.89 -0.25
(0.380 +0.035 -0.010)
9.65 0.25
(0.380 0.010)
4.32 (0.170) max.

(Y) Overlap

N/A

N/A

(LL) Lead
Length

12.7 min.
(0.500)

19.05
(0.750)

6.10 0.127
(0.240 0.005)
0.102 0.025
(0.004 0.001)
High Purity Silver Leads
Leads are attached with
High Temperature Solder

8.89 0.25
(0.350 0.010)
0.25 0.13
(0.010 0.005)
High Purity Silver Leads
Leads are attached with
High Temperature Solder

(WL) Lead
Width
(TL) Lead
Thickness
Lead
Material

For RoHS compliant products,


please select correct termination style.

221

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications
DIELECTRIC PERFORMANCE CHARACTERISTICS
Capacitance Range

1.0pF to 2,700pF
(25C, 1.0 0.2 Vrms at 1kHz, for 1000 pF use 1MHz)
0.10pF, 0.25pF, 0.50pF, 1%, 2%, 5%, 10%, 20%
0.1% Max (+25C, 1.0 0.2 Vrms at 1kHz, for 1000 pF use 1MHz)
-55C to +125C
C0G: 0 30 ppm/C (-55C to +125C), P90: 90 30 ppm/C (-55C to +125C)
100K M min. @ +25C and 500VDC
10K M min. @ +125C and 500VDC
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC or less for 5 seconds.

Capacitance Tolerances
Dissipation Factor 25C
Operating Temperature Range
Temperature Characteristic
Insulation Resistance
Dielectric Strength

HQCC CAPACITANCE VALUES (A DIELECTRIC)


Cap
Code
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8

Cap
(pF)
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8

Tol.

B, C, D

Rated
WVDC

2500

Cap
Code
8R2
100
120
150
180
220
270
330
390
470
560

Cap
(pF)
8.2
10
12
15
18
22
27
33
39
47
56

Tol.

Rated
WVDC

B, C, D

F, G, J
K, M

2500

Cap
Code
680
820
101
121
151
181
221
271
331
391

Cap
(pF)
68
82
100
120
150
180
220
270
330
390

Tol.

F, G, J
K, M

Rated
WVDC

2500

1500

Cap
Code
471
561
681
821
102
122
152
182
222
272

Cap
(pF)
470
560
680
820
1000
1200
1500
1800
2200
2700

Tol.

1000
F, G, J
K, M
500
300

HQCC CAPACITANCE VALUES (M DIELECTRIC)


Cap
Code
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R5
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1

8
222

Cap
(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.5
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1

Tol.

B, C, D

Rated WVDC
Standard Extended

2500

3600

Cap
Code
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151

Cap
(pF)
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150

Tol.

F, G, J
K, M

Rated WVDC
Standard Extended

2500

3600

3000

Cap
Code
161
181
201
221
241
271
301
331
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
242
272

Cap
(pF)
160
180
200
220
240
270
300
330
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1500
1800
2200
2400
2700

Tol.

Rated WVDC
Standard Extended

2500

3000

1500

2000

1000

1500

F, G, J
K, M

500
300

Rated
WVDC
1500

800
500

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications
HQCE CAPACITANCE VALUES (A DIELECTRIC)
Cap
Code
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120

Cap
(pF)
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12

Tol.

Rated WVDC
Standard Extended

C, D
3600

7200

G, J,
K, M

Cap
Code
150
180
220
270
330
390
470
560
680
820
101
121
151
181

Cap
(pF)
15
18
22
27
33
39
47
56
68
82
100
120
150
180

Tol.

Rated WVDC
Standard Extended

7200
G, J,
K, M

3600

5000

Cap
Code
221
271
331
391
471
561
681
821
102
122
152
182
222

Cap
(pF)
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200

Cap
Code
331
391
471
561
681
821
102
122
152
182
222
272
332
472
512

Cap
(pF)
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
4700
5100

Tol.

Rated WVDC
Standard Extended

3600

G, J,
K, M

2500
NA
1000

HQCE CAPACITANCE VALUES (M DIELECTRIC)


Cap
Code
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150

Cap
(pF)
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15

Tol.

B, C, D

F, G, J,
K, M

Rated WVDC
Standard Extended

3600

7200

Cap
Code
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271

Cap
(pF)
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270

Tol.

Rated WVDC
Standard Extended

7200
F, G, J,
K, M

3600

5000
3600

Tol.

Rated WVDC
Standard Extended

3600
2500
F, G, J,
K, M

NA
1000

G, J
K, M

500

8
223

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications

HQCC PERFORMANCE CHARACTERISTICS (A DIELECTRIC)


ESR VS. CAPACITANCE
HQCC

100000

10000

500 MHz

0.1

30 MHz
150 MHz

ESR (Ohms)

Q VS. CAPACITANCE
HQCC

1000

30 MHz

0.01

150 MHz
100
500 MHz
(Typical)

(Typical)

0.001
1

10

100

1000

10

10000

10

100

Capacitance (pF)

SERIES RESONANCE VS. CAPACITANCE


HQCC

10000

1000

10000

Capacitance (pF)

CURRENT RATING VS. CAPACITANCE


HQCC

100

RMS Current (Amps)

Frequency (MHz)

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
15C/W. A power dissipation of 4W will result
in a case temperature of 125C.

1000

100

10
150 MHz

500 MHz

30 MHz

10 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

(Typical)
10

0.1
1

10

100

1000

10000

10

Capacitance (pF)

100

1000

10000

Capacitance (pF)

HQCC PERFORMANCE CHARACTERISTICS (M DIELECTRIC)


ESR VS. CAPACITANCE
HQCC

100000

10000

500 MHz

0.1

30 MHz
150 MHz

ESR (Ohms)

Q VS. CAPACITANCE
HQCC

1000

30 MHz

0.01

150 MHz
100
500 MHz
(Typical)

0.001
1

10

100

Capacitance (pF)

8
224

1000

10000

(Typical)
10

10

100

Capacitance (pF)

1000

10000

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications
SERIES RESONANCE VS. CAPACITANCE
HQCC

10000

CURRENT RATING VS. CAPACITANCE


HQCC

100

RMS Current (Amps)

Frequency (MHz)

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
15C/W. A power dissipation of 4W will result
in a case temperature of 125C.

1000

100

10
150 MHz

500 MHz

30 MHz

10 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

(Typical)
10

0.1
1

10

100

1000

10000

10

100

Capacitance (pF)

1000

10000

Capacitance (pF)

HQCE PERFORMANCE CHARACTERISTICS (A DIELECTRIC)


ESR VS. CAPACITANCE
HQCE

10000
0.1

30 MHz

ESR (Ohms)

Q VS. CAPACITANCE
HQCE

100000

30 MHz
1000

(Typical)

(Typical)
0.01

10

100

100

1000

ESR VS. CAPACITANCE


HQCE

1000

1000

Q VS. CAPACITANCE
HQCE

30 MHz
30 MHz
0.01

ESR (Ohms)

100

Capacitance (pF)
(1.0 pF to 400 pF)

Capacitance (pF)
(1.0 pF to 400 pF)

0.1

10

100

(Typical)

(Typical)
0.001

100

1000

Capacitance (pF)
(430 pF to 2200 pF)

10000

10

100

1000

10000

Capacitance (pF)
(430 pF to 2200 pF)

8
225

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications
SERIES RESONANCE VS. CAPACITANCE
HQCE

100

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
12C/W. A power dissipation of 5W will result
in a case temperature of 125C.

RMS Current (Amps)

Frequency (MHz)

10000

CURRENT RATING VS. CAPACITANCE


HQCE

1000

100

10

2 MHz

10 MHz

30 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

(Typical)
10

0.1
1

10

100

1000

10000

10

CURRENT RATING VS. CAPACITANCE


HQCE

100

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
12C/W. A power dissipation of 5W will result
in a case temperature of 125C.

RMS Current (Amps)

10 MHz
30 MHz
10
2 MHz

10
30 MHz
10 MHz

2 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

100

1000

CURRENT RATING VS. CAPACITANCE


HQCE

100

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
12C/W. A power dissipation of 5W will result
in a case temperature of 125C.

RMS Current (Amps)

100

Capacitance (pF)
(1.0 pF to 400 pF)

Capacitance (pF)

1000

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

0.1

10000

10

Capacitance (pF)
(430 pF to 2200 pF)

100

1000

Capacitance (pF)
(1.0 pF to 180 pF)

HQCE PERFORMANCE CHARACTERISTICS (M DIELECTRIC)


ESR VS CAPACITANCE
HQCE M Dielectric

Q VS CAPACITANCE
HQCE M Dielectric
100000

10000
30 MHz
0.1

ESR (Ohms)

30 MHz
1000

(Typical)

(Typical)

0.01
1

10

100

Capacitance (1.0 pF to 400 pF)

8
226

1000

100
1

10

100

Capacitance (1.0 pF to 400 pF)

1000

Hi-Q High RF Power


MLC Surface Mount Capacitors
For 600V to 7200V Applications

Q VS CAPACITANCE
HQCE M Dielectric

ESR VS CAPACITANCE
HQCE M Dielectric

1000

30 MHz

30 MHz

0.1

ESR (Ohms)

100

(Typical)

(Typical)
10

0.01
100

1000

100

10000

10000

Capacitance (430 pF to 5100 pF)

Capacitance (430 pF to 5100 pF)

SERIES RESONANCE VS CAPACITANCE


HQCE M Dielectric

CURRENT RATING VS CAPACITANCE


HQCE M Dielectric
100

10000

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
12C/W. A power dissipation of 5W will result
in a case temperature of 125C.
RMS Current (Amps)

Frequency (MHz)

1000

1000

100

10

30 MHz

10 MHz
2 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)

(Typical)
0.1

10
1

10

100

1000

10000

10

100

1000

Capacitance (1.0 pF to 400 pF)

Capacitance (pF)

CURRENT RATING VS CAPACITANCE


HQCE M Dielectric
100

RMS Current (Amps)

The current rating is based on a 65C mounting


surface and a device thermal resistance () of
12C/W. A power dissipation of 5W will result
in a case temperature of 125C.
10 MHz
30 MHz
10
2 MHz

Dotted line = Power dissipation limited


Solid line = Voltage limited (Vrms)
1

100

1000

10000

Capacitance (430 pF to 5100 pF)

8
227

RF/Microwave C0G (NP0)


Capacitors (RoHS)
Ultra Low ESR, CU Series, C0G (NP0) Chip Capacitors
GENERAL INFORMATION
CU Series capacitors are C0G (NP0) chip capacitors
specially designed for Ultra low ESR for applications in
the communications market. Sizes available are EIA chip
sizes 01005 and 0201.

LEAD-FREE COMPATIBLE
COMPONENT

DIMENSIONS:
01005

0201

A
C

B
D

Size

L
(Length)

W
(Width)

T
(Max. Thickness)

g
(min.)

mm (inches)
A
(Termination Min./Max.)

0402
(01005)
0603
(0201)

0.400.02
(0.0160.0008)
0.600.03
(0.0240.001)

0.200.02
0.0080.0008)
0.300.03
(0.0120.001)

0.22
(0.009)
0.33
(0.013)

0.13
(0.005)
0.15
(0.006)

0.70/0.14
(0.003/0.006)
0.10/0.20
(0.004/0.008)

HOW TO ORDER
CU01

100

Case Size
CU10 = 01005
CU01 = 0201

Voltage
Code
3 = 25V
Y = 16V

Dielectric
1 = 030ppm
C0G (NP0)

Capacitance
EIA Capacitance
Code in pF.

Capacitance
Tolerance
Code

Failure Rate
Code
A = Not
Applicable

Termination
T = Plated Ni
and Sn

Packaging
Code
2 = 7" Reel
4 = 13" Reel
U = 7" Reel
4mm TR
(01005)

Special
A = Standard

First two digits =


significant figures or
R for decimal place.
Third digit = number
of zeros or after R
significant figures.

ELECTRICAL CHARACTERISTICS
Capacitance Value Range:
Size 01005
Size 0201

0.5 to 22pF
0.5 to 22pF

Temperature Coefficient of Capacitance (TC):


030 ppm/C (-55 to +125C)

Insulation Resistance (IR):


1012 min. @ 25C and rated WVDC
1011 min. @ 125C and rated WVDC

Working Voltage (WVDC):


Size
01005 0201 -

8
228

Working Voltage
16 WVDC
25 WVDC

B = 0.1pF
C = 0.25pF
D = 0.5pF
G = 2%
J = 5%

RF/Microwave C0G (NP0)


Capacitors (RoHS)
Ultra Low ESR, CU Series, C0G (NP0) Chip Capacitors
CAPACITANCE RANGE
AvailableTolerance
01005
0201
B,C,D
B,C,D

G,J,K

B,C,D
C,D
C,D
D
D
J,K

J,K

Cap
(pF)
0.5
0.75
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.2
6.8
8.2
10.0
12.0
15.0
18.0
22.0

ULTRA LOW ESR, CU SERIES


01005 6.2pF
0
In. loss

-5
-10

F1
F2
F3
F4
F5

F (GHz)
0.31
1.28
2.408
4.635
4.897

IL
-0.40
-5.03
-11.58
-40.55
-31.82

R. loss
-9.68
-1.44
-0.27
-0.39
-0.47

F1
F2
F3
F4
F5

F (GHz)
0.31
1.28
2.408
4.635
4.897

IL
-0.13
-2.89
-8.09
-29.45
-38.55

R. loss
-12.90
-2.84
-0.60
-0.37
-0.45

F1
F2
F3
F4
F5

F (GHz)
0.31
1.28
2.408
4.635
4.897

IL
-2.90
-15.26
-45.65
-14.90
-12.89

R. loss
-2.85
-0.10
-0.10
-0.87
-1.08

-15

dB

-20
-25
-30
-35

R. loss

-40
-45
-50
0

10

12

Frequency (GHz)

0201 4.7pF
0
In. loss

-5
-10
-15

dB

-20
-25
-30
-35

R. loss

-40
-45
-50
0

10

12

Frequency (GHz)

0201 22pF
10
In. loss
0

dB

-10
-20
-30
R. loss

-40
-50
0

10

12

Frequency (GHz)

229

RF/Microwave C0G (NP0)


Capacitors (RoHS)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
GENERAL INFORMATION
are met on each value producing lot to lot uniformity.
Sizes available are EIA chip sizes 0603, 0805, and 1210.

U Series capacitors are C0G (NP0) chip capacitors specially designed for Ultra low ESR for applications in the
communications market. Max ESR and effective capacitance

DIMENSIONS: inches (millimeters)


0402

0603

0805

1210
A

A
C

B
D

E D
D

Size

0402
0603
0805
1210

0.0390.004
0.0600.010
0.0790.008
0.1260.008

B
(1.000.1)
(1.520.25)
(2.010.2)
(3.20.2)

0.0200.004
0.0300.010
0.0490.008
0.0980.008

(0.500.1)
(0.760.25)
(1.250.2)
(2.490.2)

inches (mm)
E

0.024 (0.6) max


0.036 (0.91) max
0.0400.005 (1.020.127)
0.0500.005 (1.270.127)

N/A
0.0100.005 (0.250.13)
0.0200.010 (0.510.254)
0.0250.015 (0.6350.381)

N/A
0.030 (0.76) min
0.020 (0.51) min
0.040 (1.02) min

HOW TO ORDER
0805

Case Size

100

Dielectric =
Ultra Low
ESR

0402
0603
0805
1210

=
=
=
=

25V
50V
100V
200V

Capacitance
Tolerance
Code
B = 0.1pF
C = 0.25pF
D = 0.5pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

Voltage Code
3
5
1
2

Capacitance
EIA Capacitance Code in pF.
First two digits = significant figures
or R for decimal place.

Termination

Special Code

T= Plated Ni and Sn

A = Standard

Failure Rate
Code

Packaging
Code

A = Not
Applicable

2 = 7" Reel
4 = 13" Reel
9 = Bulk

Third digit = number of zeros or


after R significant figures.

ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
Size
Size
Size
Size

0402
0603
0805
1210

0.2
1.0
1.6
2.4

pF
pF
pF
pF

to
to
to
to

22 pF @ 1 MHz
100 pF @ 1 MHz
160 pF @ 1 MHz
1000 pF @ 1 MHz

Temperature Coefficient of Capacitance (TC):


030 ppm/C (-55 to +125C)

Insulation Resistance (IR):


1012 min. @ 25C and rated WVDC
1011 min. @ 125C and rated WVDC

Working Voltage (WVDC):


Size
0402
0603
0805
1210

8
230

Working Voltage
50, 25 WVDC
200, 100, 50 WVDC
200, 100 WVDC
200, 100 WVDC

LEAD-FREE COMPATIBLE
COMPONENT

Dielectric Working Voltage (DWV):


250% of rated WVDC

Equivalent Series Resistance Typical (ESR):


0402
0603
0805
1210

See
See
See
See

Performance
Performance
Performance
Performance

Curve,
Curve,
Curve,
Curve,

page
page
page
page

231
231
231
231

Marking: Laser marking EIA J marking standard


(except 0603) (capacitance code and
tolerance upon request).

MILITARY SPECIFICATIONS
Meets or exceeds the requirements of MIL-C-55681

RF/Microwave C0G (NP0)


Capacitors (RoHS)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
CAPACITANCE RANGE

200V
100V

50V
N/A

F,G,J,K,M N/A 100V 200V 200V


50V
50V
N/A 200V
100V
100V
N/A

200V
100V

F,G,J,K,M

100
110
120
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

B,C,J,K,M 50V 200V 200V 200V


B,C,J,K,M
F,G,J,K,M

B,C,D
B,C,J,K,M

7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91

Size
0402 0603 0805 1210

50V 200V 200V 200V

B,C,D

B,C,D

B,C
B,C,D

1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8

Available
Cap (pF) Tolerance

N/A N/A

Size
0402 0603 0805 1210

N/A

Available
Cap (pF) Tolerance

50V

Size
0402 0603 0805 1210

B,C

Available
Cap (pF) Tolerance

0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9

Size
0402 0603 0805 1210

Available
Cap (pF) Tolerance

ULTRA LOW ESR, U SERIES


TYPICAL ESR vs. FREQUENCY
0603 U SERIES

TYPICAL ESR vs. FREQUENCY


0402 U SERIES
1

3.9 pF
4.7 pF
5.1 pF
6.8 pF
10.0 pF
15.0 pF

ESR (ohms)

ESR (ohms)

10 pF
15 pF
3.3 pF

0.1

0.01

0.01
0

500

1000

1500

2000

2500

500

1000

1500

2000

Frequency (MHz)

Frequency (MHz)

TYPICAL ESR vs. FREQUENCY


0805 U SERIES

TYPICAL ESR vs. FREQUENCY


1210 U SERIES

2500

100 pF
10.0 pF

ESR (ohms)

ESR (ohms)

0.1

0.1

0.1

10 pF
100 pF

300 pF

0.01

0.01
0

500

1000

1500

Frequency (MHz)

2000

2500

500

1000

1500

2000

Frequency (MHz)

ESR Measured on the Boonton 34A

8
231

RF/Microwave C0G (NP0)


Capacitors (RoHS)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
TYPICAL
SERIES RESONANT FREQUENCY
U SERIES CHIP
10

Frequency (GHz)

0402
0603
0805
1210

1.0

0.1
1.0

10

100
Capacitance (pF)

8
232

1000

RF/Microwave Automotive C0G (NP0)


Capacitors (RoHS), AEC Q200 Qualified
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
GENERAL INFORMATION
Automotive U Series capacitors are C0G (NP0) chip capacitors specially designed for Ultra low ESR for applications in
the automotive market. Max ESR and effective capacitance

are met on each value producing lot to lot uniformity. Sizes


available are EIA chip sizes 0402 and 0603.

DIMENSIONS: inches (millimeters)


0402

0603

A
C

B
D

Size

0402
0603

0.0390.004 (1.000.1)
0.0600.010 (1.520.25)

0.0200.004 (0.500.1)
0.0300.010 (0.760.25)

0.024 (0.6) max


0.036 (0.91) max

inches (mm)
E

D
N/A
0.0100.005 (0.250.13)

N/A
0.030 (0.76) min

HOW TO ORDER
0402

Case Size

100

Dielectric =
Ultra Low
ESR

0402
0603

Capacitance
Tolerance
Code
B = 0.1pF
C = 0.25pF
D = 0.5pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

Voltage Code
5 = 50V
1 = 100V
2 = 200V

Capacitance

Termination

Special Code

T= Plated Ni and Sn

A = Standard

Failure Rate
Code

Packaging
Code

4 = Automotive

2 = 7" Reel
4 = 13" Reel
9 = Bulk

EIA Capacitance Code in pF.


First two digits = significant figures
or R for decimal place.
Third digit = number of zeros or
after R significant figures.

ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
Size 0402 - 0.2 pF to 22 pF @ 1 MHz
Size 0603 - 1.0 pF to 100 pF @ 1 MHz

Temperature Coefficient of Capacitance (TC):


030 ppm/C (-55 to +125C)

Insulation Resistance (IR):


1012 min. @ 25C and rated WVDC
1011 min. @ 125C and rated WVDC

LEAD-FREE COMPATIBLE
COMPONENT

Dielectric Working Voltage (DWV):


250% of rated WVDC

Equivalent Series Resistance Typical (ESR):


0402
0603

See Performance Curve, page 234


See Performance Curve, page 234

Automotive Specifications
Meets or exceeds the requirements of AEC Q200

Working Voltage (WVDC):


Size
0402
0603

Working Voltage
50, 25 WVDC
200, 100, 50 WVDC

233

RF/Microwave Automotive C0G (NP0)


Capacitors (RoHS), AEC Q200 Qualified
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
CAPACITANCE RANGE
B,C,J,K,M 50V 200V
B,C,J,K,M
F,G,J,K,M

200V
100V

50V
N/A

B,C,D
B,C,J,K,M

7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91

B,C,D

50V 200V

100
110
120
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

Size
0402 0603

F,G,J,K,M N/A 100V


50V
50V
N/A

F,G,J,K,M

B,C
B,C,D

B,C,D

Available
Cap (pF) Tolerance

1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8

N/A

Size
0402 0603

Available
Cap (pF) Tolerance

50V

Size
0402 0603

B,C

Available
Cap (pF) Tolerance

0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9

Size
0402 0603

Available
Cap (pF) Tolerance

ULTRA LOW ESR, U SERIES


TYPICAL ESR vs. FREQUENCY
0603 U SERIES

TYPICAL ESR vs. FREQUENCY


0402 U SERIES
1

3.9 pF
4.7 pF
5.1 pF
6.8 pF
10.0 pF
15.0 pF

ESR (ohms)

ESR (ohms)

10 pF
15 pF
3.3 pF

0.1

0.01

0.01
0

500

1000

1500

Frequency (MHz)

234

0.1

2000

2500

500

1000

1500

Frequency (MHz)

2000

2500

RF/Microwave Automotive C0G (NP0)


Capacitors (RoHS), AEC Q200 Qualified
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
TYPICAL
SERIES RESONANT FREQUENCY
U SERIES CHIP
10

Frequency (GHz)

0402
0603

1.0

0.1
1.0

10

100

1000

Capacitance (pF)

235

RF/Microwave C0G (NP0)


Capacitors (Sn/Pb)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
GENERAL INFORMATION
are met on each value producing lot to lot uniformity.
Sizes available are EIA chip sizes 0603, 0805, and 1210.

U Series capacitors are C0G (NP0) chip capacitors specially designed for Ultra low ESR for applications in the
communications market. Max ESR and effective capacitance

DIMENSIONS: inches (millimeters)


0402

0603

0805

1210
A

A
C

B
D

E D
D

Size

0402
0603
0805
1210

0.0390.004
0.0600.010
0.0790.008
0.1260.008

B
(1.000.1)
(1.520.25)
(2.010.2)
(3.20.2)

0.0200.004
0.0300.010
0.0490.008
0.0980.008

(0.500.1)
(0.760.25)
(1.250.2)
(2.490.2)

inches (mm)
E

0.024 (0.6) max


0.036 (0.91) max
0.0400.005 (1.020.127)
0.0500.005 (1.270.127)

N/A
0.0100.005 (0.250.13)
0.0200.010 (0.510.254)
0.0250.015 (0.6350.381)

N/A
0.030 (0.76) min
0.020 (0.51) min
0.040 (1.02) min

HOW TO ORDER
LD05

Case Size

100

Dielectric =
Ultra Low
ESR

LD02 = 0402
LD03 = 0603
LD05 = 0805
LD10 = 1210

=
=
=
=

25V
50V
100V
200V

Capacitance
Tolerance
Code
B = 0.1pF
C = 0.25pF
D = 0.5pF
F = 1%
G = 2%
J = 5%
K = 10%
M = 20%

Voltage Code
3
5
1
2

Capacitance
EIA Capacitance Code in pF.

Termination

Special Code

B = 5% min lead

A = Standard

Failure Rate
Code

Packaging
Code

A = Not
Applicable

2 = 7" Reel
4 = 13" Reel
9 = Bulk

First two digits = significant figures


or R for decimal place.
Third digit = number of zeros or
after R significant figures.

Not RoHS Compliant

ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
Size
Size
Size
Size

0402
0603
0805
1210

0.2
1.0
1.6
2.4

pF
pF
pF
pF

to
to
to
to

22 pF @ 1 MHz
100 pF @ 1 MHz
160 pF @ 1 MHz
1000 pF @ 1 MHz

Temperature Coefficient of Capacitance (TC):


030 ppm/C (-55 to +125C)

Insulation Resistance (IR):


1012 min. @ 25C and rated WVDC
1011 min. @ 125C and rated WVDC

Working Voltage (WVDC):


Size
0402
0603
0805
1210

8
236

Working Voltage
50, 25 WVDC
200, 100, 50 WVDC
200, 100 WVDC
200, 100 WVDC

Dielectric Working Voltage (DWV):


250% of rated WVDC

Equivalent Series Resistance Typical (ESR):


0402
0603
0805
1210

See
See
See
See

Performance
Performance
Performance
Performance

Curve,
Curve,
Curve,
Curve,

page
page
page
page

237
237
237
237

Marking: Laser marking EIA J marking standard


(except 0603) (capacitance code and
tolerance upon request).

MILITARY SPECIFICATIONS
Meets or exceeds the requirements of MIL-C-55681

RF/Microwave C0G (NP0)


Capacitors (Sn/Pb)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
CAPACITANCE RANGE

B,C,J,K,M
F,G,J,K,M

200V
100V

50V
N/A

F,G,J,K,M N/A 100V 200V 200V


50V
50V
N/A 200V
100V
100V
N/A

200V
100V

100
110
120
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000

B,C,J,K,M 50V 200V 200V 200V

F,G,J,K,M

B,C,D
B,C,J,K,M

7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91

50V 200V 200V 200V

B,C,D

B,C,D

B,C
B,C,D

1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8

N/A N/A

N/A

50V

Size
Available
Cap (pF) Tolerance LD02 LD03 LD05 LD10

B,C

Size
Available
Cap (pF) Tolerance LD02 LD03 LD05 LD10

0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9

Size
Available
Cap (pF) Tolerance LD02 LD03 LD05 LD10

Size
Available
Cap (pF) Tolerance LD02 LD03 LD05 LD10

ULTRA LOW ESR, U SERIES


TYPICAL ESR vs. FREQUENCY
0603 U SERIES

TYPICAL ESR vs. FREQUENCY


0402 U SERIES
1

3.9 pF
4.7 pF
5.1 pF
6.8 pF
10.0 pF
15.0 pF

ESR (ohms)

ESR (ohms)

10 pF
15 pF
3.3 pF

0.1

0.01

0.01
0

500

1000

1500

2000

2500

500

1000

1500

2000

Frequency (MHz)

Frequency (MHz)

TYPICAL ESR vs. FREQUENCY


0805 U SERIES

TYPICAL ESR vs. FREQUENCY


1210 U SERIES

2500

100 pF
10.0 pF

ESR (ohms)

ESR (ohms)

0.1

0.1

0.1

10 pF
100 pF

300 pF

0.01

0.01
0

500

1000

1500

Frequency (MHz)

2000

2500

500

1000

1500

2000

Frequency (MHz)

ESR Measured on the Boonton 34A

8
237

RF/Microwave C0G (NP0)


Capacitors (Sn/Pb)
Ultra Low ESR, U Series, C0G (NP0) Chip Capacitors
TYPICAL
SERIES RESONANT FREQUENCY
U SERIES CHIP
10

Frequency (GHz)

0402
0603
0805
1210

1.0

0.1
1.0

10

100
Capacitance (pF)

8
238

1000

Designer Kits
U Dielectric Kits

Cap.
Value
pF
0.5
1.0
1.5
1.8
2.2
2.4
3.0
3.6

0402

0603

Kit 5000 UZ

Kit 4000 UZ

Tolerance

B (0.1pF)

Cap.
Value
pF
4.7
5.6
6.8
8.2
10.0
12.0
15.0

Tolerance

B (0.1pF)

J (5%)

***25 each of 15 values

Cap.
Value
pF
1.0
1.2
1.5
1.8
2.0
2.4
2.7
3.0
3.3
3.9
4.7
5.6

Tolerance

Cap.
Value
pF

B (0.1pF)

6.8
7.5
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0

Tolerance

B (0.1pF)

J (5%)

***25 each of 24 values

Cap.
Value
pF
1.0
1.5
2.2
2.4
2.7
3.0
3.3
3.9
4.7
5.6
7.5
8.2
9.1
10.0
12.0

0805

1210

Kit 3000 UZ

Kit 3500 UZ

Tolerance

B (0.1pF)

J (5%)

***25 each of 30 values

Cap.
Value
pF
15.0
18.0
22.0
24.0
27.0
33.0
36.0
39.0
47.0
56.0
68.0
82.0
100.0
130.0
160.0

Tolerance

Cap.
Value
pF

J (5%)

2.2
2.7
4.7
5.1
6.8
8.2
9.1
10.0
13.0
15.0
18.0
20.0
24.0
27.0
30.0

Tolerance

B (0.1pF)

J (5%)

Cap.
Value
pF

Tolerance

36.0
39.0
47.0
51.0
56.0
68.0
82.0
100.0
120.0
130.0
240.0
300.0
390.0
470.0
680.0

J (5%)

***25 each of 30 values

8
239

Other Products
SOLUTIONS ACROSS THE BOARD
Capacitors

Filters

Piezo

Advanced Power Film


Ceramic
Disc
Film
Glass
High Voltage
Leaded / Through Hole
Low ESR
Low Inductance
Military / Aerospace
MLCC Array
MOS / MIS
Niobium Oxide* (OxiCap)
RF / Microwave
(Power, Hi Q, Thin-Film)
Single Layer (SLC)
SMPS (Power Supply)
Stacked Ceramic
Supercapacitor (BestCap)
Tantalum
Tantalum Polymer
Trimmer

EMI (Bolt-In and SMD)


EMI / TVS Filter
Feedthrough
High Current Feedthrough
Low Pass (Thin-Film)
SAW

Acoustic Devices
Actuators

Circuit Protection

Module Devices

Fuses (Thin-Film)
MLV (TransGuard)
MLV Array (MultiGuard)
NTC Thermistors
Transient Voltage Suppressors
Zinc Oxide Varistors

Antenna Switch
Bluetooth
LTCC
GPS
RX Module
WLAN Module

RF / Microwave
Capacitors
Couplers
Inductors
PMC Custom Filters
Modules
Timing Devices
Passive Micro Components (PMC)
Diplexers
Crossovers

Integrated Passives
IDC (Low Inductance Array)
Passive Thick Film Array
Passive Micro Components (PMC)

Timing Devices
Ceramic Resonator
Clock Oscillator
Crystal Applied Product
MHz Crystal
SAW Resonator
TCXO

Connectors
2mm Hard Metric
Automotive Custom
Battery
Board to Board
1 piece Compression
2 piece Microleaf
Card Edge
DIN41612
FFC / FPC
IDC
Memory Connectors
PCMCIA Kits
Compact Flash
SO-DIMM
SIMM / RUIM
SDIO / SD
Military
PCI Express
Varicon Rack and Panel

For more information please visit


our website at
http://www.avx.com
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given
herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements
or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are
typical and may not apply to all applications.

AVX Corporation

240

AMERICAS

EUROPE

ASIA-PACIFIC

ASIA-KED
(KYOCERA Electronic Devices)

AVX Greenville, SC
Tel: 864-967-2150

AVX Limited, England


Tel: +44-1276-697000

AVX/Kyocera (S) Pte Ltd.,


Singapore

KED Hong Kong Ltd.


Tel: +852-2305-1080/1223

Tel: +65-6286-7555

AVX S.A.S., France


Tel: +33-1-69-18-46-00

AVX/Kyocera, Asia, Ltd.,


Hong Kong

AVX GmbH, Germany

Tel: +852-2363-3303

Tel: +49-0811-95949-0

AVX SRL, Italy

AVX/Kyocera Yuhan Hoesa,


South Korea

Tel: +39-02-614-571

Tel: +82-2785-6504

AVX Czech Republic

AVX/Kyocera HK Ltd.,
Taiwan

Tel: +420-57-57-57-521

KED Hong Kong Ltd.


Shenzen
Tel: +86-755-3398-9600

KED Company Ltd.


Shanghai
Tel: +86-21-3255-1833

KED Hong Kong Ltd.


Beijing
Tel: +86-10-5869-4655

Tel: +886-2-2656-0258

AVX/ELCO UK

KED Taiwan Ltd.

Tel: +44-1638-675000

AVX/Kyocera (M) Sdn Bhd,


Malaysia

ELCO Europe GmbH

Tel: +60-4228-1190

Tel: +49-2741-299-0

AVX S.A., Spain

AVX/Kyocera International
Trading Co. Ltd.,
Shanghai

Tel: +34-91-63-97-197

Tel: +86-21-3255 1933

AVX Benelux

AVX/Kyocera Asia Ltd.,


Shenzen

Tel: +65-6509-0328

Tel: +86-755-3336-0615

Kyocera Corporation
Japan

AVX/Kyocera International
Trading Co. Ltd.,
Beijing

Tel: +81-75-604-3449

Tel: +31-187-489-337

Tel: +886-2-2950-0268

KED Korea Yuhan Hoesa,


South Korea
Tel: +82-2-783-3604/6126

KED (S) Pte Ltd.


Singapore

Tel: +86-10-6588-3528

AVX/Kyocera India
Liaison Office
Tel: +91-80-6450-0715

Contact:

A KYOCERA GROUP COMPANY

http://www.avx.com

S-RFMTF0M1015-C

You might also like