Professional Documents
Culture Documents
moulding
www.hales.com.au
components
Moulders Catalogue 25/3/10 11:51 AM Page 1
Contents
Water Fittings & Hose ................................................................................3
Connector Plugs..................................................................................................................................................................................3
Socket Connectors...........................................................................................................................................................................4
Brass Extension Plugs..................................................................................................................................................................5
Quick Connect Water Jumpers..........................................................................................................................................6
Telescopic Water Fittings...........................................................................................................................................................7
Brass Water / Air Fittings..................................................................................................................................................8-15
Pressure Plugs....................................................................................................................................................................................15
Hose & Fittings...................................................................................................................................................................................16
Push Lock Fittings & Hose ...................................................................................................................................................16
Contents
Multipole Connectors.........................................................................................................................................................21-23
www.hales.com.au 1
Moulders Catalogue 25/3/10 11:51 AM Page 2
Contents continued...
Date Stamps....................................................................................................35
Cumsa Standard Date Stamp........................................................................................................................................35
Cumsa Standard Date Insert ...........................................................................................................................................35
Mould Dating Inserts ..................................................................................................................................................................36
Double Date Stamp.....................................................................................................................................................................37
Mould Identification Month / Year Inserts...........................................................................................................38
Reference Insert ...............................................................................................................................................................................39
2 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 3
Connector Plugs
d1
A
R
d
H
d1
A
R
d
R
d
SW
L
d1
R
d
Part R d di L SW
Number Series Thread
CM251F 1/8 6 9 28 13
CM252F 200 Series 1/4 6 9 32 17
CM253F 3/8 6 9 34 19
CM352F 1/4 9 13 37 17
CM353F 300 Series 3/8 9 13 39 19
CM354F 1/2 9 13 46 24
www.hales.com.au 3
Moulders Catalogue 25/3/10 11:51 AM Page 4
Socket Connectors
Flow
Hose ID
Flow
D
L
Hose ID
Straight Socket L
Flow
D
Part Part Hose Flow L D Series
Number Number ID
W/O Valve With Valve
Hose ID
CM206 CM206V 3/8 1/4 51mm 17 200
Water Fittings & Hose
Hales Socket Connectors offer an efficient and CM306 CM306V 3/8 1/4 64mm 23 300
speedy method of hose removal. Made of brass with CM308 CM308V 1/2 3/8 66.5mm 23 300
stainless steel bearings, they are of premium quality.
CM506 CM506V 3/4 5/8 89mm 30 500
D
D
L1
L1
Hose ID
D
Hose ID
Flow
L1
L
Flow
Hose ID
L
90O Socket
Flow
L1
L1
D
D
e
os
Fl
ow
H
L
ID
e
os
Fl
ow
ID
H
e
os
Fl
ow
H
45O Socket
Part Part Hose Flow L L1 D Series
Number Number ID
W/O Valve With Valve
CM226 CM226V 3/8 1/8 55.5mm 22mm 18 200
CM328 CM328V 1/2 3/8 75mm 25mm 24 300
CM526 CM526V 3/4 5/8 77mm 30mm 32 500
4 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 5
H
d
Hales Brass Extensions offer the flexibility of a long thread, making precise adjustments easy.
Part L T d di A Part L T d di A
Number Number
CM251252 2 1/2 1/8 1/4 3/8 11/16 CM351252 2 1/2 1/8 3/8 1/2 7/8
CM2514 4 1/8 1/4 3/8 1 CM3514 4 1/8 3/8 1/2 1
CM251512 5 1/2 1/8 1/4 3/8 1 CM351512 5 1/2 1/8 3/8 1/2 1
CM2517 7 1/8 1/4 3/8 1 CM3517 7 1/8 3/8 1/2 1
CM251812 8 1/2 1/8 1/4 3/8 1 CM351812 8 1/2 1/8 3/8 1/2 1
CM252212 2 1/2 1/4 1/4 3/8 7/8 CM352212 2 1/2 1/4 3/8 1/2 7/8
CM2524 4 1/4 1/4 3/8 1 1/4 CM3524 4 1/4 3/8 1/2 1 1/4
CM252512 5 1/2 1/4 1/4 3/8 1 1/4 CM352512 5 1/2 1/4 3/8 1/2 1 1/4
CM2527 7 1/4 1/4 3/8 1 1/4 CM3527 7 1/4 3/8 1/2 1 1/4
CM252812 8 1/2 1/4 1/4 3/8 1 1/4 CM352812 8 1/2 1/4 3/8 1/2 1 1/4
CM253212 2 1/2 3/8 1/4 3/8 1 CM35210 10 1/4 3/8 1/2 1 1/4
Height
www.hales.com.au 5
Moulders Catalogue 25/3/10 11:51 AM Page 6
C
C
Water Fittings & Hose
L
L
Hose ID
Hose ID
Part FHS Hose L C M A Hales Water Jumpers offer smooth unrestricted flow paths
Number Series ID and consistent coolant flow rate, eliminating crimped hoses.
Viton seals M
Viton seals M
6 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 7
øB
øB øB L Max.
L Max.
L Max.
L Min.
L Min.
L Min.
SW
SWSW
R øS
R R øS øS
MA.506518 35 21 26 1/8” 5 6 50 65
MA.650018 35 21 26 1/8” 5 6 65 100
MA.506514 35 21 26 1/4” 6 6 50 65
MA.650014 35 21 26 1/4” 6 6 65 100
MA.608514 39 25 30 1/4” 9 8 60 85
MA.851314 39 25 30 1/4” 9 8 85 130
MA.608538 39 25 30 3/8” 9 8 60 85
MA.851338 39 25 30 3/8” 9 8 85 130
L Max.
L Max.
L Max.
ø21
ø21ø21
L Min.
L Min.
L Min.
SW6
SW6
SW6
26
26 26 35
35 35
R øS
R R øS øS
www.hales.com.au 7
Moulders Catalogue 25/3/10 11:51 AM Page 8
8 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 9
www.hales.com.au 9
Moulders Catalogue 25/3/10 11:51 AM Page 10
10 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 11
www.hales.com.au 11
Moulders Catalogue 25/3/10 11:51 AM Page 12
12 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 13
www.hales.com.au 13
Moulders Catalogue 25/3/10 11:51 AM Page 14
14 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 15
Pressure Plugs
www.hales.com.au 15
Moulders Catalogue 25/3/10 11:51 AM Page 16
Oil Hose
No. ID OD Roll Colour Pressure
Crimping Service
Hose crimped to order
Polyurethane Hose
PU0604-200-U 6mmOD x 4mmID x 200m, Blue
PU0805-100-U 8mmOD x 5mmID x 100m, Blue
16 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 17
RMA Module
• Simultaneous digital setpoint and digital temperature indication.
• Accepts Type J or Type K thermocouple input (jumper selectable).
• Auto-tuning, with adjustable proportional band and rate.
• Bumpless auto/manual transfer.
• CompuStep bakeout feature prevents moisture at start-up.
• Built-in loop break, short, open, and reverse thermocouple protection
• Optional triac failure protection.
• Preset alarms at 30oF (17oC).
• Jumper-selectable self-start mode.
• Current monitor feature displays average current to load.
• CE-compliant.
Description Code
Multi Zone Temperature Control System
Mounting Boxes
www.hales.com.au 17
Moulders Catalogue 25/3/10 11:51 AM Page 18
Power Cables
Thermocouple Connecters
Connecter Zones
Connecter Zones
18 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 19
Description Code
Cable Length
www.hales.com.au 19
Moulders Catalogue 25/3/10 11:51 AM Page 20
Part Number # of Zones Length (Y) Width (X) Height (H) Mounting Hole (M1) Mounting Hole (M2)
PTBC005 005 8.66˝ 2.75˝ 4.50˝ 1.500 8.031
PRCB008 008 9.47˝ 2.75˝ 4.50˝ 1.500 8.843
PTBCO12 012 10.53˝ 2.75˝ 4.50˝ 1.500 9.906
Panel Zones
MFB= Blank 10= Single Zone
Panel Zones
MFS= Floorstand 5812= Adjustable
20 www.hales.com.au
Moulders Catalogue 25/3/10 11:51 AM Page 21
Multipole Connectors
CHI 06 L MHV 06 LG25 CNEM 06 T - Male Inserts
CNEF10 T
www.hales.com.au 21
Moulders Catalogue 25/3/10 11:39 AM Page 22
Multipole Connectors
MHP 16.225/240 MHV 16.25/32 CHI 16L
Temperature Controllers & Plugs
CNEF 16T
22 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 23
Multipole Connectors
MHP 24.225/240 MHV 24.32 CHI 24 L
www.hales.com.au 23
Moulders Catalogue 25/3/10 11:39 AM Page 24
Band Heaters
• Low profile flexible leads
• 1 metre leads
• Premium MICA insulation
• Stainless bands
• Welded style made to order
• Other sizes made to order, fast delivery
24 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 25
www.hales.com.au 25
Moulders Catalogue 25/3/10 11:39 AM Page 26
Coil Heaters
Coil Heaters without thermocouple
Nozzle Heater Wattage & Length MX Nozzle Heater Front Load Style MT Nozzle Heater
X13045H 38.8 220 16 MX13045HFS 38.8 13.9 225 MT13045H 34 12.7 225
X13055H 48.8 230 16 MX13055HFS 38.8 13.9 250 MT13056H 44 12.7 250
X13065H 58.8 240 16 MX13065HFS 38.8 13.9 250 MT13066H 54 12.7 250
X13075H 68.8 250 16 MX13075HFS 38.8 13.9 290 MT13075H 64 12.7 290
X13095H 88.8 275 16 MX13095HFS 38.8 13.9 330 MT13105H 94 12.7 400
X13115H 108.8 300 16 MX13115HFS 38.8 13.9 400
Heaters & Thermocouples
X13145H 138.8 330 16 MX13145HFS 38.8 13.9 470 MT16036H 28 15.2 250
X13175H 168.8 365 16 MX13175HFS 38.8 13.9 550 MT16046H 38 15.2 290
MT16056H 48 15.2 330
X16045H 37.8 290 18.1 MX16045HFS 37.8 16.6 290 MT16076H 68 15.2 400
X16055H 47.8 310 18.1 MX16055HFS 47.8 16.6 330 MT16086H 78 15.2 470
X16065H 57.8 335 18.1 MX16065HFS 57.8 16.6 330 MT16116H 108 15.2 550
X16075H 67.8 360 18.1 MX16075HFS 67.8 16.6 400 MT16146H 138 15.2 620
X16095H 87.8 385 18.1 MX16095HFS 87.8 16.6 470 MT16167H 158 15.2 700
X16115H 107.8 410 18.1 MX16115HFS 107.8 16.6 550
X16145H 137.8 440 18.1 MX16145HFS 137.8 16.6 620 MT22056H 46.7 21.8 470
X16175H 167.8 475 18.1 MX16175HFS 167.8 16.6 700 MT22086H 74 21.8 620
MT22116H 104 21.8 700
X19055H 45.5 400 21.5 MX19055HFS 45.8 20.4 400 MT22146H 134 21.8 850
X19065H 55.3 435 21.5 MX19065HFS 55.8 20.4 470
X19075H 65.3 470 21.5 MX19075HFS 65.8 20.4 470 MT27075H 62.2 26.4 550
X19095H 85.3 505 21.5 MX19095HFS 85.8 20.4 550 MT27125H 111 26.4 800
X19115H 105.3 540 21.5 MX19115HFS 105.8 20.4 620 MT27175H 161 26.4 1000
X19145H 135.3 575 21.5 MX19145HFS 135.8 20.4 700 MT27225H 211 26.4 1400
X19175H 165.3 610 21.5 MX19175HFS 165.8 20.4 850
MT33100H 90.4 32.4 800
X27075H 60.4 570 30.3 MT33150H 137 32.4 1000
X27095H 80.4 680 30.3 MT33200H 187 32.4 1400
X27115H 100.4 780 30.3 MT33250H 237 32.4 1800
X27145H 103.4 815 30.3
X27175H 160.4 850 30.3
X27225H 210.4 905 30.3
X27275H 260.4 960 30.3 L
SX Sprue Heater
Code L Watt id
ID
SX24H SX13 & 16 Sprue Heater
22 250 24.3
SX30H SX19 & 27 Sprue Heater
22.5 290 30
26 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 27
www.hales.com.au 27
Moulders Catalogue 25/3/10 11:39 AM Page 28
Thermocouples - J Type
L
Heaters & Thermocouples
1/4
14
1/4
20
TE7003 Surface Type MASTE7003 Surface Type
Thermocouple
8
20
11
ɔ4.1
8
11
11
ɔ4.1
ɔ4.1
28 www.hales.com.au
Moulders Catalogue 25/3/10 12:05 PM Page 29
Mould Release
Silicone Mould Release
NANO-5MLKIT 5ml
NANO-FG-5MLKIT Food Grade 5ml
www.hales.com.au 29
Moulders Catalogue 25/3/10 11:39 AM Page 30
Soft Seal
Seals out moisture forming a waxy film, highly resistant to humidity & salt
spray.
30 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 31
Cleaners
Tool & Die Parts Cleaner
Contact Cleaner
Contact cleaner is a precision electronic cleaning solvent, leaves no
residue & is low in toxicity.
Lectra Clean
Electric motor & equipment cleaner. No flash point and quick drying.
Halesabsorbclay All purpose spill absorber, made from 100% absorbent granules
which are effective at absorbing spills and liquids.
Environmentally safe and easy to use 20kg bags.
www.hales.com.au 31
Moulders Catalogue 25/3/10 12:08 PM Page 32
HydraulicHydraulic Oils
Oils - Shell - Shell Tellus
Tellus
The most important component of any hydraulic system is
the fluid it contains. Shell Tellus Oils are proven anti-wear
performers; from the control of London’s Tower Bridge and
the London Eye to the lock gates on the Panama Canal,
precision control on Boeing flight simulators to
rubbish removal, Shell Tellus has you covered.
Performance features of Shell Tellus
• Superior anti wear performance – wear rates are approximately 1/10th
of those obtained with other anti wear hydraulic oils • Outstanding
pump protection and performance • Prolonged oil life • Good thermal
stability • Rapid air release and low foaming
Industry applications
Lubricants, Oils & Greases
Description High quality anti-wear hydraulic oils which contain oxidation, anti-foam and corrosion inhibitors.
Applications Suitable for most hydraulic applications such as machine tools, hydraulic presses and rams
as well as earthmoving equipment. Shell Tellus Oil(s) are not suitable for equipment containing
silver plated components with coated surfaces. Use Shell Tellus S instead.
Viscosity availability 22, 32, 46, 68, 100
Shell Tellus T
Description Shear stable hydraulic oils with high viscosity indexes which also contain zinc. Shell Tellus T
offers all the protection of Shell Tellus Oil but are specially formulated to be used in hydraulic
equipment subject to temperature extremes.
Applications Hydraulic power and control systems which are subject to the extremes of temperature.
Viscosity availability 15, 37, 46, 68, 100
Shell Tellus S
Description Premium quality hydraulic oils which contain no zinc or chlorine additives. Shell Tellus S offers
all the benefits of Shell Tellus Oil in addition to providing exceptional performance and long life
in hydraulic systems which are subject to severe duty.
Applications Hydraulic systems that are subject to severe duty and are critical to a plants operation. Shell
Tellus S can be used in systems containing silver plated components.
Viscosity availability 32, 46, 68, 100
32 www.hales.com.au
Moulders Catalogue 25/3/10 12:08 PM Page 33
Description Shell Corena S is a premium quality lubricant that is based on a blend of selected solvent
refined base oils and carefully chosen additives.
Applications Shell Corena S is specifically developed for oil-flooded rotary sliding vane and screw
compressors.
Viscosity availability 46, 68
Description Shell Corena AS is a fully synthetic compressor oil which is intended for oil-flooded rotary air
compressors which are operating at higher than normal temperatures.
Applications Shell Corena AS is intended for oil-flooded rotary air compressors which are operating at
higher than normal temperatures, equipment running under arduous conditions and ABB
Turbochargers.
Viscosity availability 46, 68
Shell Corena P
Description Shell Corena P is a premium quality reciprocating compressor lubricant. It is based upon a
range of specially selected base oils to provide a level of performance approaching that of
synthetic oils.
Applications Shell Corena P is suitable for reciprocating air compressors and breathing air compressors.
Viscosity availability 68, 100, 150
Description Shell Corena AP is an advanced fully synthetic reciprocating air compressor lubricant for
industrial reciprocating compressors operating under higher than normal temperatures and
severe duty.
Applications All industrial reciprocating air compressors which are operating at high pressures (over 30
bar) and high temperatures.
Viscosity availability 68, 100
Shell Corena CH 46
Description Shell Corena CH 46 is formulated using paraffinic base oils and additives which imparts anti-
oxidation, anti-wear, anti-corrosion and anti-foam properties.
Applications Shell Corena CH 46 has been developed specifically for the lubrication of oil flooded rotary
sliding vane and screw air compressors.
Viscosity availability 46
www.hales.com.au 33
Moulders Catalogue 25/3/10 12:08 PM Page 34
EDM Fluid
with other ingredients to form a gel-like material. Greases have the advantage that they tend to stay where they are put!
Performance features of Shell Greases
• Good corrosion resistance • Good oxidation and mechanical stability • Reliable high temperature performance
Industry applications • Automotive • Road transport • Agriculture • General manufacturing • Mining • Construction
Description Lithium based multi-purpose, lead free, extreme pressure grease with improved vibration resistance.
Applications Suitable for ball and roller bearings, plain bearings and general grease applications.
NLGI Availability 0, 1, 2
Lubricants, Oils & Greases
Shell Alvania RL
Description Shell Alvania RL are general purpose industrial greases based on a new lithium hydroxystearate soap
thickener fortified with anti-oxidant, antiwear and anti-rust additives.
Applications Suitable for use in electric motor bearings, generators, fans, alternators and pump bearings. Not
suitable in extreme pressure applications.
NLGI Availability 2, 3
Other Shell Alvania Greases: Shell Alvania HDX and Shell Alvania SDX
Shell Albida EP
Description High performance lithium complex, long life grease suited to high temperatures (max 150°C).
Applications Suited to general industrial applications.
NLGI Availability 1, 2
Other Shell Albida Greases include: Shell Albida GC1, Shell Albida HD2,
Shell Albida HDX2, Shell Albida MDX1 and Shell Albida MDX2
Shell Stamina EP
Description Shell Stamina EP is a fully synthetic, high temperature (max 180°C) Polyurea long life grease.
Applications Recommended for heavy-duty bearings subjected to high temperatures and extreme pressures.
NLGI Availability 2
Other Shell Stamina Greases: Shell Stamina HDS and Shell Stamina RL2
PTFE Grease
Shell Greases for Trucks and Cars
The Retinax range consists of automotive greases forThe ultimate
virtually P.T.F.E.
any kind paste from
of application, for the
highlyassembly of
specialized formulations
for specific applications, to hard working general-purpose greases.
injection mould tools, engine head assembly and
many other uses.
Shell Retinax EP
34 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 35
Cumsa Standard
Date Stamp
Mat.: INOX. 1.4034 - Hard. 51 ± 3 HRC.
Maximum working temperature 150°C. Patented System
Inner insert is always at the same level as the body of the date stamp.
Wide range of diameters. Only a H7 pocket required for assembly. No
downtime when changing inserts. Internal mechanism guarantees secure
replacement of inserts.
Date Stamps
Important: Indicate the
desired year after the
12 Months 12 Mon. + Yr Years Blank A C D E L N
reference
Special engraving
FA.0422SF FA.042212-.. FA.042204-.. FA.042200 4 2.2 6 3.5 12 4 available under request
FA.0530SF FA.053012-.. FA.053004-.. FA.053000 5 3 6 3.5 12 4
FA.0632SF FA.063212-.. FA.063205-.. FA.063200 6 3.2 12 4 20 5
FA.0847SF FA.084712-.. FA.084705-.. FA.084700 8 4.7 12 6 20 5
FA.1057SF FA.105712-.. FA.105706-.. FA.105700 10 5.7 12 8 20 6
FA.1267SF FA.126712-.. FA.126708-.. FA.126700 12 6.7 12 10 20 8
FA.1687SF FA.168712-.. FA.168710-.. FA.168700 16 8.7 12 12 20 10
FA.2007SF FA.200712-.. FA.200710-.. FA.200700 20 10.7 12 14 20 10
Date Insert
Mat.: INOX. 1.4034
Hardened 51 ± 3 HRC.
www.hales.com.au 35
Moulders Catalogue 25/3/10 11:39 AM Page 36
Dimension
DIA D L F
6 6 8 3.1
8 8 10 4.4
10 10 12 6.2
12 12 14 6.2
16 16 14 8.2
Date Stamps
20 20 16 11
Indication DIA Part No. DIA Part No. Indication DIA Part No. DIA Part No.
36 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 37
Date Stamps
12 Month. + Yr Blank A B C E N
www.hales.com.au 37
Moulders Catalogue 25/3/10 11:39 AM Page 38
38 www.hales.com.au
Moulders Catalogue 25/3/10 11:39 AM Page 39
Reference Insert
Mat.: INOX. 1.4034
Hardened 51 ± 3 HRC.
Date Stamps
Ref. A B E H K S
www.hales.com.au 39
Moulders Catalogue 25/3/10 11:40 AM Page 40
Ejector Couplers
C F G H I J
Production Accessories
K L
Mould Closed-Material Injected Mould Open-Coupler Engages and Pushes Forward Coupler and Bars Pull Back the Ejector Plate
COUPLER
Code Thread F G H I J K L M
BARBS
Code Thread C D E
40 www.hales.com.au
Moulders Catalogue 25/3/10 11:40 AM Page 41
Production Accessories
Standard Coupler: QKAC18
www.hales.com.au 41
Moulders Catalogue 25/3/10 11:44 AM Page 42
Air Poppets
Mat.: INOX. 1.4034
Hardened 51 ± 3 HRC. Working pressure 1.5-6 BARS.
VA Ref. A B C D E H
VA.050412 5 3 12 1.5 4 7
Production Accessories
Double Valve
Ref. A B C E H
VD.080512 8 5 12 4 7
VD.100612 10 6 12 5 7
VD.120812 12 8 12 7 7
VD.161020 16 10 20 9 12
1 VD VA-FV
1 VD VA-FV
1 VD VA-FV
3
2
42 www.hales.com.au
3
Moulders Catalogue 25/3/10 11:44 AM Page 43
1.125
+.015
1.875 -.000
Progressive Counter Views positively mould usage by tracking P
L
activity for the life of the tool. Three mounting styles are available
.938
for easy installation of the Counter View.
Production Accessories
100 Series
Parting Line Mount CVPL-100 Internal Extension Mount CVIN-100
1.125
+.015
.375 Ø -.000
1.125
1.000 .250
P
L
+.015 .465
1.875 -.000
P
L .93 P
L1.000
.938
1.500 5/16 R
+.01 #8-32 SHCS (4)
-.00 x 1.00" long
Parting the mount makes the unit visible to the operator. The machinable 8” extension allows for mounting in the support plate
or rails.
1.125 Front ID plate may be stamped for easy tool identification prior to
.250 attachment onto Counter View housing. Machine pocket, threads,
and extension clearance hole as shown. Attach Counter View with
screws, ensuring that housing seats firmly into pocket, with the
aculator parallel to the parting line.
.93 P
L
+.015
.375 Ø -.000
P
ID
.465
1 2 3 4 5 6 7
.750
www.hales.com.au 43
ID
Moulders Catalogue 25/3/10 11:44 AM Page 44
The Thinswitch® Limit Switch has been tested for Operating Temperature
reliability over 10 million cycles without failure. Two T-222-LR Standard Model ...............................175oF max.
switches can be used in series for larger molds to (79.4oC max.)
ensure the ejector plate return, preventing costly mold HT-291-LR High Temp Model........................250oF max.
damage. (121oC max.)
Switching .............................................................................SPDT
Features and Benefits
Rated Current vs. Steel Temperature
• Over 10 million cycle life provides long
T-222-LR HT-291-LR
dependable service.
Amps °F °C Amps °F °C
• 175oF (79.4oC) standard temperature rating 5.0 85 29.4 5.0 100 37.7
allows installation into most molding applications. 4.0 120 49.0 4.5 155 68.3
3.0 155 68.3 4.0 210 98.8
• 250oF (121oC) high temperature unit is available 2.0 175 79.4 3.5 250 121.1
for higher temperature needs.
• Adjustable operating point allows actuation The Thinswitch® Limit Switch is designed for use in
between .187# and .250# from the base. very low power mold protection control circuits. It is
not intended to switch heavy loads in power
• In stock to provide same day delivery in most applications.
cases.
Materials
• 3/16# thick design fits snugly behind the ejector Body.................................................................Fibreglass-reinforced nylon
plate in the space provided by the rest buttons. Dome......................................................................................................Polyurethane
• Stripped and tinned 6 ft. wire leads make the Back Cover.....................................................................................Polyester film
switch ready to install without modification. Wire Leads.................................................................................22ga stranded,
3-conductor, shielded cable,
6 ft. (1.8m) long,
ends stripped and tinned
44 www.hales.com.au
Moulders Catalogue 25/3/10 11:44 AM Page 45
Housing Temperature
Standard Rating
T-222 Standard
175oF / 79.4oC maximum
HT-291 High Temperature
250oF / 121oC maximum
Production Accessories
Wiring Diagram
Parts Included
Normally 1 Thinswitch Limit Switch
Closed 1 Allen wrench (for height adjustment)
(red)
4 #10-24 button head screws
Common
(white) Normally 2 Wire Clamps
Open 1 Instruction sheet
(black)
Dimensions
Standard Housing
www.hales.com.au 45
Moulders Catalogue 25/3/10 11:44 AM Page 46
46 www.hales.com.au
Moulders Catalogue 25/3/10 12:11 PM Page 47
Sprue Snips
Part No Description Specifications
Production Accessories
Usable Blade Opening at Tip 16mm
Usable Blade Opening at Base 6mm
Knives
Throwaway Knife
Part Number Description
www.hales.com.au 47
Moulders Catalogue 25/3/10 12:11 PM Page 48
Deburring Tools
Rapid Burr
Part Number Description
Teddy Burr
Part Number Description
Edge-Off Plastic
Part Number Description
Noga Burr 5
Part Number Description
Liza Burr
Part Number Description
S10 Blade
Part Number Description
B10-Plastic
Part Number Description
N1 Blade
Part Number Description
48 www.hales.com.au
Moulders Catalogue 25/3/10 11:44 AM Page 49
Slotted Clamps
G
B
E
H
D
C
Boat Clamps
www.hales.com.au 49
Moulders Catalogue 25/3/10 11:44 AM Page 50
HT-2
Lifts 2.2Kg with POWERCAP
165mm extends to 845mm
The POWERCAP shields the sides of the magnet from
attaching to unwanted surfaces, and increases lifting capacity
by over 45% HT-3
Stainless steel telescoping handle is strong, long & lightweight Lifts 4.5Kg with POWERCAP
Mould Maintenance & Set Up
Inspection Mirrors
High Tech Inspection Mirrors - Longer, Stronger & Lightweight
50 www.hales.com.au
Moulders Catalogue 25/3/10 12:13 PM Page 51
www.hales.com.au 51
Moulders Catalogue 25/3/10 11:44 AM Page 52
Sprue Reamers
52 www.hales.com.au
Moulders Catalogue 25/3/10 12:14 PM Page 53
Diamond Paste
Hales Diamond Compound contains the finest grades of diamond particles. The result
is the best concentration.
DP01 1 14,000 LIGHT BLUE For the finest finish on all tooling
DP03 3 8,000 GREEN
DP06 6 3,000 YELLOW Commercial finish for most tooling
DP09 9 18,000 RED
DP15 15 12,000 LIGHT BROWN
www.hales.com.au 53
Moulders Catalogue 25/3/10 11:44 AM Page 54
F1
F2
Mould Maintenance & Set Up
VRS-F Starpoint
Eyebolt with Metric coarse thread, 360˚ Rotation
54 www.hales.com.au
Moulders Catalogue 25/3/10 11:44 AM Page 55
26.5
110
57
67 305
Part No. AØ B CØ D E F
EYE24 3/8” 21 14 9 20 18
EYE32 1/2” 28 19 11 25 23 D
C
EYE40 5/8” 35 24 15 32 30
Ø
EYE48 3/4” 42 29 16 37 40
EYE56 7/8” 50 33 20 44 41
EYE64 1” 57 38 22 51 46 E
EYE72 1 1/8” 71 48 28 66 50
EYE80 1 1/4” 71 48 28 65 50
EYE96 1 1/2” 86 55 33 75 66 F
EYE112 1 3/4” 86 55 33 75 66
ØA B
EYE128 2” 102 66 40 92 77
EYE160 2 1/2” 115 72 49 102 89
EYE192 3” 143 95 56 127 111
www.hales.com.au 55
Moulders Catalogue 0310 25/3/10 12:18 PM Page 56
56 www.hales.com.au
VICTORIA: QUEENSLAND:
45 Woodlands Drive, Braeside 3/42-50 Richland Avenue,
Victoria 3195 Australia Coopers Plains, QLD. 4108 Australia
Telephone: (61 3) 9587 7700 Telephone: (61 7) 3272 7500
Facsimile: (61 3) 9587 7711 Facsimile: (61 7) 3272 7505
moulding
www.hales.com.au
components