Professional Documents
Culture Documents
CARBON STEEL PIPING (NON IBR); THK. <= 10MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH NB 26 INCH - 36 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH NB 26 INCH - 36 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH NB 26 INCH - 36 INCH CARBON STEEL PIPING (NON IBR); THK. > 10MM AND <= 20MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH NB 26 INCH - 36 INCH NB 38 INCH - 48 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH NB 38 INCH - 48 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH NB 26 INCH - 36 INCH NB 38 INCH - 48 INCH CARBON STEEL PIPING (IBR); THK. <= TO 10MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH -
NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH CARBON STEEL PIPING (IBR); THK. > 10MM AND <= 20MM FABRICATION (BUTT WELD) NB 16 INCH - 24 INCH ERECTION (OTHER THAN SPOOL) NB 16 INCH - 24 INCH STAINLESS STEEL PIPING (NON-IBR); THK. <= 10MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH ALLOY STEEL PIPING (NON-IBR); THK. <= 10MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ALLOY STEEL PIPING (NON-IBR); THK. > 10MM AND <= 20MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH ERECTION (OTHER THAN SPOOL) NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH ALLOY STEEL PIPING (NON-IBR); THK. > 20MM AND <= 30MM -
FABRICATION (BUTT WELD) NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ERECTION (OTHER THAN SPOOL) NB 8 INCH - 14 INCH ALLOY STEEL PIPING (IBR); THK. <= 10MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH FABRICATION (FILLET WELD) NB UPTO 1.5 INCH ERECTION (OTHER THAN SPOOL) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ALLOY STEEL PIPING (IBR); THK. > 10MM AND <= 20MM FABRICATION (BUTT WELD) NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ERECTION (OTHER THAN SPOOL) NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ALLOY STEEL PIPING (IBR); THK. > 20MM AND <= 30MM FABRICATION (BUTT WELD) NB UPTO 1.5 INCH NB 2 INCH - 6 INCH NB 8 INCH - 14 INCH ERECTION (OTHER THAN SPOOL) NB 8 INCH - 14 INCH CARBON STEEL GALVANIZED NB 0.750
INCHES STEAM TRACERS CARBON STEEL NB 0.500
INCHES NB 0.750
INCHES VALVES :- Transportation of all types of valves (Including special valves, motor
operated valves, PRDS, PSVs, TSVs, Control valves, On-Off/Shutdown valves, Self
actuating valves) from Owner's storage points to contractor's stores/worksite and
installation of valves for all rating including assembly of valves accessories like air
bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing
Positive Material Identification(PMI) using alloy analysers as per specification,
drawings and directions of Engineer-in-Charge. FLANGED/WAFER VALVES INCLUDING MOV (UPTO 600#) NB 0.500
INCHES NB 0.750
INCHES -
NB 1.000
INCHES NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 4.000
INCHES NB 6.000
INCHES NB 8.000
INCHES NB 10.000
INCHES NB 12.000
INCHES NB 14.000
INCHES NB 16.000
INCHES NB 18.000
INCHES NB 20.000
INCHES NB 24.000
INCHES NB 26.000
INCHES NB 30.000
INCHES NB 36.000
INCHES NB 42.000
INCHES CONTROL VALVES (UPTO 600#) NB 0.750
INCHES NB 1.000
INCHES NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 4.000
INCHES NB 6.000
INCHES NB 8.000
INCHES NB 10.000
INCHES NB 12.000
INCHES NB 14.000
INCHES NB 16.000
INCHES NB 20.000
INCHES NB 24.000
INCHES NB 30.000
INCHES CONTROL VALVES (900# & ABOVE) NB 12.000
INCHES AS/SS BW-VALVES INCLUDING MOV(IBR) NB 0.500
INCHES NB 0.750
INCHES NB 2.000
INCHES NB 12.000
INCHES PRESS. RELIEF/ SAFETY VALVES, PILOT OP. SAFETY VALVES (UPTO 600#)(
Size are valve inlet size) NB 0.750
INCHES NB 1.000
INCHES -
NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 4.000
INCHES NB 6.000
INCHES NB 8.000
INCHES BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types of piping as
called for in EIL Specification No.6-76-0002 on already erected system including
supply of all materials, recording devices, instruments etc; Providing all normal and
special equipment and gadgets, skilled / un skilled labour, specialist, supervisory staff
and completing the work in all respects as per specifications and instructions of
engineer-in-charge. some joints may require bolt tensioning more than once, but,
payment for one joint shall be made only once. 150# JOINTS NB 14.000
INCHES NB 16.000
INCHES NB 20.000
INCHES NB 24.000
INCHES NB 26.000
INCHES NB 30.000
INCHES NB 36.000
INCHES NB 42.000
INCHES 300# JOINTS NB 10.000
INCHES NB 12.000
INCHES NB 14.000
INCHES NB 16.000
INCHES NB 18.000
INCHES NB 20.000
INCHES NB 24.000
INCHES 600# JOINTS NB 6.000
INCHES NB 8.000
INCHES NB 12.000
INCHES 900# JOINTS NB 8.000
INCHES NB 10.000
INCHES NB 12.000
INCHES 1500# JOINTS NB 1.500
INCHES NB 2.000
INCHES REINFORCING PADS FOR PIPES :- Fabrication of reinforcing pads for pipe
connection wherever required (from pipes only supplied by the Owner) and
erection, fitup, welding & testing (including DP/MP) if required of the same and
performing Positive Material Identification(PMI) using alloy analysers as per the
NB 14.000
INCHES NB 16.000
INCHES NB 18.000
INCHES NB 20.000
INCHES NB 24.000
INCHES NB 26.000
INCHES NB 30.000
INCHES NB 36.000
INCHES NB 42.000
INCHES MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of
different sizes of CS/AS/SS piping of all types and thicknessess in shop, in position,
on ground/overhead on rack and at all elevations; transportation of pipes, fittings,
flanges etc from owner's storage point to work site/ work shop, making necessary
scaffoldings, consumables, machinery, tools, tackles, labour and supervision
including attending repairs for completing the work as per the instruction of Engineerin-charge. FLAME CUTTING C.S PIPING IBR/NON IBR HACKSAW CUTTING C.S PIPING IBR/NON IBR BEVELLING
C.S PIPING IBR/NON IBR FITUP & WELDING C.S PIPING IBR/NON IBR FLAME CUTTING S.S PIPING IBR/NON IBR HACKSAW CUTTING S.S PIPING IBR/NON IBR BEVELLING
S.S PIPING IBR/NON IBR FITUP & WELDING S.S PIPING IBR/NON IBR FLAME CUTTING A.S PIPING IBR/NON IBR HACKSAW CUTTING A.S PIPING IBR/NON IBR BEVELLING
A.S PIPING IBR/NON IBR FITUP & WELDING A.S PIPING IBR/NON IBR FLAME CUTTING NICKEL/MONEL/INCOLOY PIPING HACKSAW CUTTING NICKEL/MONEL/INCOLOY PIPING BEVELLING
NICKEL/MONEL/INCOLOY PIPING FITUP & WELDING NICKEL/MONEL/INCOLOY PIPING REMOVAL ERECTED PIPING(ABOVE GROUND) :- Removal of piping existing/
erected including SW valves for modification as required as per
Drawings/P&IDs/instructions of Engineer-in-charge at all elevations, including
providing assistance to owner for draining, cleaning and purging of the lines to be
removed , unbolting of flanged joints /cutting of pipe lines wherever required,
installation of flanges and blind flanges, removal of insulation from insulated lines,
removing supports, steam tracers, all fittings and flanges, instruments etc, cutting of
pipes in appropriate length for transporting purposes, cleaning, flushing, drying and
transporting all materials to storage point(within the complex battery limits) designated
by Owner/EIL including stacking of material and disposing of waste etc as instructed
by Engineer-in-charge. C.S/A.S PIPING S.S PIPING -
NICKEL/MONEL/INCOLOY PIPING LOW FRICTION PADS: Supply, fabrication and fixing of low friction pads with suitable
bonding materials / fasteners, as specified in Drawings / Isometrics / Special support
sketches. TEFLON PAD WITH COMPRESSIVE STRENGTH (0.25 OFFSET) :1870 PSI GRAPHITE PAD WITH COMPRESSIVE STRENGTH : 2877 PSI PIPE DAVITS :
Supply, fabrication & erection of pipe davits as per EIL std. 7-12-023 for lowering of
aircooler motors/safety valves from structural platforms, fixing the same to platforms,
inspection as per specs., supply of all necessary materials, equipment, consumables,
labour, supervision etc. The work shall be carried out as per the specifications,
drawings & instruction of engineerincharge. MISCELLANAEOUS ITEMS FIRE WATER PIPING (ABOVE GROUND): Transportation of all piping items from
Owner's storage point to work site/work shop; fabrication including cutting, edge
preparation, (inclusive of grinding the edges of pipe, fittings, flanges etc. to match with
the mating edges of uneven/ different thickness wherever required); fitup, bending,
preheating wherever required, welding, threading, and laying of pipes of all types and
thickness over sleepers, overhead on racks and at all elevations and fixing of gaskets,
bolts, nuts including application of torque wherever required & all other inline
instruments and fittings, like elbows, reducers, tees, piping specials such as mitres
and fabricated fittings, vents, drains (but excluding reinforcing pads), SW valves upto
1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic,
pneumatic, vacuum, spark testing and any other type of testing as specified draining,
drying by compressed air, performing Positive Material identification(PMI) using alloy
analysers, completing all such works in all respects as per the specifications,
drawings and instructions of Engineer-in-Charge. PMI shall be performed by third
party as defined in PMI spec.
For Internal Epoxy coating, EIL Job Specification for "Internal coating of CS Fire water
piping", Doc No: A609-000-79-41-PLS-03, shall be followed.
For Epoxy coated pipes, item rates shall be inclusive of application of epoxy coating
of weld joints as per specification. CUPRO-NICKEL (90-10 Cu-Ni) PIPING; THK <= 10.0MM FABRICATION (BUTT WELD) UPTO NB 1.5 INCH NB 2 INCH - 6 INCH FABRICATION (FILLET WELD) UPTO 1.5 INCH ERECTION NB UPTO 1.5 INCH NB 2 INCH - NB 6 INCH INTERNALLY EPOXY COATED CARBON STEEL; THK <= 10MM FABRICATION (BUTT WELD) NB 2 INCH - NB 6 INCH -
NB 8 INCH - 14 INCH NB 16 INCH - 24 INCH FABRICATION (FILLET WELD) NB 2 INCH - 6 INCH ERECTION NB 2.0 INCH - 6.0 INCH NB 8.0 INCH - 14 INCH LOW FRICTION PADS:
Supply, fabrication and fixing low friction pads
(Teflon/Graphite/SS304 mirror finish) with suitable
bonding materials/fastners as specified in
drawings/isometrics/special support sketches. Stainless steel 10mm thick with mirror finish SS 304. CHEMICAL CLEANING / PICKLING:
Chemical Cleaning of Piping and Vessels as indicated in P&IDS. Work shall include
supply of all chemicals, temporary facilities, auxiliaries, boilers, heating
coils,thermometers, valves, pressure gauges, safety gears etc required for
satisfactory completion of work.The contractor should make a preliminary assessment
of the
site conditions and its existing facilities especially availability of HP/MP Steam,
Circulating pumps, Amine Tanks, etc to make a final assessment of the temporary
facilities, auxiliaries and spares that has to be arranged by him for deployment at site.
Required numbers of operating and supervisory staff for the Degreasing operation
need to be deployed by the contractor so as to ensure continuous availability of
manpower during the
entire operation and whatever else even though not
expressly mentioned herein and in specification but
required to perform the work as per specifications and instructions of Engineer-inCharge. CHEMICAL CLEANING OF HP/MP/LP STEAM GENERATORS
(SPEC NO. A609-101-79-41-CCS-07, REV 0) NB 0.75 INCH NB 1.0 INCH NB 2.0 INCH DEGREASING OF CARBON STEEL PIPING & VESSELS IN AMINE SERVICE
(SPEC NO. A609-000-79-41-CCS-03, REV 0) NB 0.5 INCH NB 0.75 INCH NB 1.0 INCH NB 1.5 INCH NB 2 INCH NB 3.0 INCH NB 4.0 INCH NB 6.0 INCH NB 8.0 INCH -
NB 1.000
INCHES NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 4.000
INCHES NB 6.000
INCHES NB 8.0 INCHES NB 12.0 INCHES FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE
SPECIFICATION/AS/SS) NB 0.750
INCHES NB 1.000
INCHES NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 6.000
INCHES FOR JOINTS ABOVE THK. 8MM NB 0.500
INCHES NB 0.750
INCHES NB 1.000
INCHES NB 1.500
INCHES NB 2.000
INCHES NB 3.000
INCHES NB 4.000
INCHES NB 6.000
INCHES NB 8.000
INCHES NB 10.000
INCHES NB 12.000
INCHES NB 14.000
INCHES NB 16.000
INCHES NB 18.000
INCHES NB 20.000
INCHES NB 24.000
INCHES NB 26.000
INCHES NB 30.000
INCHES NB 36.000
INCHES NB 42.000
INCHES CONVENTIONAL RADIOGRAPHY :- Performance of
radiographic inspection on piping of all types &
thicknesses including providing or hiring of all necessary equipment and whatever
else even though not expressly mentioned but required to perform the work as per
specifications and instructions of Engineer-in-Charge. Radiographs shall be submitted
to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on
repaired joints due to Contractor's fault and for additional radiography necessitated
due to poor performance of contractor's welders shall be done at contractor's cost)
Dismatling & Erection of valves :Debolting/ Dismantling / dropping of all types & ratings of erected valves, control
vales, safety valves cleaning, transporting the same to owners storage point / work
shop ( if required ) by providing required scaffoldings at all levels and location, tools &
tackels, consumables, necessary manpower, as per direction of owner/ engineer in
charge.
Issuing of valves ( all size & rating ) from owner's storage point, transporting the same
to work site, erection at all elevation/ location, installation & tightening of gaskets,
bolts nuts by providing necessary scaffolding, manpower, consumables, tools &
tackels, etc and complete the work in all respect as per drawing , instruction of
owner's / engineer in charge. CONTROL VALVES (INCLUDING SPECIAL VALVES, ON-OFF VALVES, SDVs,
MOVs AND PCVs) Control valves Upto 600# NB 0.75 INCHES NB 1.0 INCHES NB 1.5 INCHES NB 2.0 INCHES NB 3.0 INCHES NB 4.0 INCHES NB 6.0 INCHES NB 8.0 INCHES NB 10.0 INCHES NB 12.0 INCHES NB 14.0 INCHES NB 16.0 INCHES NB 20.0 INCHES NB 24.0 INCHES NB 30.0 INCHES CONTROL VALVES (900#) NB 12.0 INCHES SAFETY VALVES (INCLUDING PILOT OPERATED & THERMAL RELIEF) UPTO 300# INLET SIZE 0.75 INCH INLET SIZE NB 1 INCH INLET SIZE NB 1.5 INCH INLET SIZE NB 2.0 INCH INLET SIZE NB 3.0 INCH INLET SIZE NB 4.0 INCH INLET SIZE NB 6.0 INCH INLET SIZE NB 8.0 INCH CHECK VALVES NB 0.5 INCH NB 0.75 INCH NB 1.0 INCH -
NB 1.5 INCH NB 2.0 INCH NB 3.0 INCH NB 4.0 INCH NB 6.0 INCH NB 8.0 INCH NB 10.0 INCH NB 14.0 INCH NB 16.0 INCH NB 18.0 INCH NB 20.0 INCH NB 24.0 INCH BOXING-UP OF PIPING / EQUIPMENT FLANGES:
Box-up of flange joints / Blinds by providing required scaffoldings / temporary
supports / mechanical jacks at all locations and elevation, engaging manpower, tools
& tackels, tightening Torque wrench/ Tensioner ( wherever torque tightening is
required ), lapping Paste,
including issuing and transportation of bolts, nuts and
gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of
flanges where ever required, removal of temporary gaskets / studs, nuts / test blinds
installed by others and completing the work in all respect as per specification, drawing
and instruction of owner / engineer in charge.)
DEBLINDING OF FLANGE JOINTS:- Opening of stud/ nuts, removal of blinds,
cleaning of mating surfaces, tranportaion of the blind to the space specified by owner
( where ever required ) and completing the job in all respect by engaging all
necessary scaffolding at all elevation/ location, manpower, tools & tackels, lifting
arrangements, consumables and complete the work in all respect as per instruction of
owner's/ engineer in charge. 150 # Flange assembly NB 0.75 INCH NB 1.0 INCH NB 1.5 INCH NB 2.0 INCH NB 3.0 INCH NB 4.0 INCH NB 6.0 INCH NB 8.0 INCH NB 10.0 INCH NB 12.0 INCH NB 14.0 INCH NB 16.0 INCH NB 18.0 INCH NB 20.0 INCH NB 24.0 INCH NB 30.0 INCH NB 36.0 INCH -
NB 42.0 INCH 300 # Flange assembly NB 0.75 INCH NB 1.0 INCH NB 1.5 INCH NB 2.0 INCH NB 3.0 INCH NB 4.0 INCH NB 6.0 INCH NB 8.0 INCH NB 10.0 INCH NB 12.0 INCH NB 14.0 INCH NB 16.0 INCH NB 18.0 INCH NB 24.0 INCH NB 30.0 INCH 600 # Flange assembly NB 1.0 INCH NB 1.5 INCH NB 2.0 INCH NB 3.0 INCH NB 4.0 INCH NB 8.0 INCH NB 12.0 INCH 900 # Flange assembly NB 2.0 INCH NB 4.0 INCH NB 10.0 INCH NB 12.0 INCH NB 14.0 INCH NB 16.0 INCH 1500 # Flange assembly NB 10.0 INCH FABRICATION OF TAIL BLINDS :Issuing and transportation of CS plates from owner store to work site, marking to the
required shape and size, gas cutting of the same, grinding the edges to smoothness
by providing all necessary tools & tackels, manpower, consumables etc and complete
the job in all respect as per the instruction of owner's/ engineer in charge. NB 0.5 INCH NB 0.75 INCH NB 1.0 INCH NB 1.5 INCH NB 2.0 INCH NB 3.0 INCH -
NB 4.0 INCH NB 6.0 INCH NB 8.0 INCH NB 10.0 INCH NB 12.0 INCH NB 14.0 INCH NB 16.0 INCH NB 18.0 INCH NB 20.0 INCH NB 24.0 INCH NB 26.0 INCH NB 30.0 INCH NB 36.0 INCH NB 42.0 INCH MAN POWER ASSISTANCE FOR PRECOMMISSIONING ACTIVITIES:Providing supervisor, skilled and unskilled man power assistance for any type of job
as directed for project precommissioning activities such as air and water flushing,
card board blasting with air,steam blowing, air drying,leak testing, pressure testing/
holding tests, work related to compressors, pump,
such as oil filling, centrifuging of oil,alignment of rotating equipments, hot/cold
alignment & running of rotating equipmenrts, vibration reading,checking bores of
orifices, checks on pipe hangers/supports, guides for hot and cold settings on round
the clockbasis including providing electrodes, filler wire, gas, card board, target plate
proper scaffolding, hand tools, equipment, machinery,
consumables and single point responsibility of
contractor's supervision. Contractor shall engage
physically fit manpower who have executed similar works in precommissioning of
process units.
Note: This manpower will be utilized for precommissioning requirtement over and
above that already described elsewhere in this SOR.
One man day is 12 hour duty. SKILLED (WITH HAND TOOLS, EQUIPMENTS/
MACHINERY, CONSUMABLES) SEMI SKILLED (WITH HAND TOOLS) HELPER/UNSKILLED Manhole Opening & Box-up ( For size from 20" to 24" dia, all ratings ) :- Opening of
manhole flanges of static equipments at any elevation & reboxing up of the
same,cleaning of mating surfaces of flanges, Cleaning & greasing of bolts & nuts,
providing gaskets , stud nuts ( gaskets & stud nuts to be issued from owner store &
transported to site if required ), tightening the bolts by manual / torque wrench/
tensioner by providing all necessary manpower, tools & tackels,Torque wrench / Bolt
tensioner ( wherever required), Lapping Paste, scaffolding, consumables etc and
complete the job in all respect up to the satishfaction / instruction of owner's /
engineer in charge.
-
Cleaning of Strainers / Filters (all ratings) :- Opening of flange joints/ cover flanges of
strainer, revoval of filters, strainers from position, cleaning of strainers and internals
and reboxing up to its original position, hot bolting, fixing of additional wire meshby
tying/ stiching for flushing requirement ( wherever necessary ) by providing all nessary
manpower, scaffolding at all elevation & location, tools & tackels, consumables etc
and complete the job in all respect as per the instruction of owner's / engineer in
charge. EPOXY COATING OF PIPING ITEMS:
Application of Epoxy coating on pipes, fittings, flanges etc. including supply of glass
reinforced epoxy, essential equipments, tools & tackles, consumables etc. to perform
the work as per requirements specified in Document "Job specification for internal
coating of CS fire water piping and fittings", Doc. no. A609-000-79-41-PLS-03 and
instructions of engineer-in charge. Epoxy coating of piping items: ULTRASONIC TESTING :- Performance of ultrasonic
examination on piping of all types & thickness including providing or hiring of all
necessary equipments and whatever else even though not expressly mentioned but
required to perform the work as per requirements specified in job specification no
A609-000-06-41-WSP-01 (job specification of welding for fabrication of piping) and
instruction of Engineer-in-Charge. Ultrasonic testing using advanced techniques like
PAUT and /TOFD.
Reports shall be submitted to the EngineerinCharge. (Repeat testing due to defective report on
repaired joints due to contractor's fault and for additional testing necessitated due to
poor performance of contractor's welders shall be done at contractors cost).
Ultrasonic testing machine and consumables for testing will be arranged by the
contractor. However
CONTRACTOR must submit all the reports and details
after converting the reports in digital format to the OWNER. Bidder to ensure the
interpretation from Level 3 inspectors.
PAINTING (UNITS) :- Supply of paints and primers, preparation of surfaces and
application of primer and finish paints, identification (Line numbering), lettering, colour
bands, colour coding etc. as specified including rubdown and touch up of shop primer
wherever required, providing scaffolding for all heights, labour, material, tools and
PIPES NB: .5
NB: .75
NB: 1
NB: 1.5
NB: 2
NB: 3
NB: 4
NB: 6
NB: 8
NB: 10
NB: 12
NB: 14
NB: 20
NB: 24
VALVES NB: 2
NB: 3
NB: 4
NB: 6
NB: 8
NB: 10
NB: 12
NB: 14
Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches -
DESIGN TEMP GROUP: 401 TO 550 (DEG C)SURFACE PREPARATION: SSPCSP-10, PRIMER: 1 COAT OF F-12@ 20 DFT/ COAT, FINISH COAT: 2 COATS OF
F-12 @ 20 DFT/ COAT; ( 2 X 20=40) PIPES NB: .5
Inches NB: 2
Inches NB: 8
Inches NB: 24
Inches PAINTING OF INSULATED SURFACES FOR INDUSTRIAL MARINE
ENVIRONMENT AS PER JOB SPEC A609-000-79-41-PLS-01 FOR CS/LTCS/LOW
ALLOY STEEL PIPING DESIGN TEMP GROUP: -45 TO 125 (DEG C)SURFACE PREPARATION: SSPCSP-10, PRIMER: 1COAT OF F-9 @ 75 DFT/COAT, FINISH COAT: 3 COATS OF
F-15 @ 75 DFT/COAT PIPES NB: .5
Inches NB: .75
Inches NB: 1
Inches NB: 1.5
Inches NB: 2
Inches NB: 3
Inches -
NB: 4
NB: 6
NB: 8
NB: 10
NB: 12
NB: 14
NB: 16
NB: 18
NB: 20
NB: 24
NB: 30
VALVES NB: 2
NB: 3
NB: 4
NB: 6
NB: 8
NB: 10
NB: 12
NB: 16
NB: 18
NB: 20
NB: 24
Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches -
DESIGN TEMP GROUP: 126 TO 400 (DEG C)SURFACE PREPARATION: SSPCSP-10, PRIMER: 1COAT OF F-9 @ 65-75 DFT/COAT, FINISH COAT: 3 COATS OF
F-12 @ 20 DFT/COAT
PIPES NB: .5
Inches NB: .75
Inches NB: 1
Inches NB: 1.5
Inches NB: 2
Inches NB: 3
Inches NB: 4
Inches NB: 6
Inches NB: 8
Inches NB: 10
Inches NB: 12
Inches NB: 14
Inches NB: 16
Inches NB: 18
Inches NB: 20
Inches NB: 24
Inches NB: 26
Inches NB: 30
Inches -
NB: 36
NB: 42
VALVES NB: 2
NB: 3
NB: 4
NB: 6
NB: 8
NB: 10
NB: 12
NB: 14
NB: 16
NB: 20
NB: 24
NB: 26
NB: 36
NB: 42
Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches -
DESIGN TEMP GROUP: 401 TO 450 (DEG C)SURFACE PREPARATION: SSPCSP-10, PRIMER: 1 COAT OF F-12 @20 DFT/COAT, FINISH COAT: 3 COATS OF
F-12 @ 20 DFT/COAT PIPES NB: .75
Inches NB: 1
Inches NB: 1.5
Inches NB: 2
Inches NB: 3
Inches VALVES NB: 2
Inches NB: 3
Inches PAINTING OF INSULATED SURFACES FOR INDUSTRIAL MARINE
ENVIRONMENT AS PER JOB SPEC A609-000-79-41-PLS-01 FOR SS/AS/ ALLOY20 PIPING DESIGN TEMP GROUP: -30 TO 125 (DEG C)SURFACE PREPARATION: SWEEP
BLASTING/LIGHT BLAST CLEAN AS PER GRADE Sa-1.0, OF SWEDISH
STANDARDS SIS-05-5900 (LATEST) (15-25 SURFACE PROFILE), PRIMER: 1
COAT OF F-15@ 80 DFT/COAT, FINISH COAT: 1 COAT OF F-15
INTERMEDIATE COAT @ 80 DFT/COAT + 1 COAT of F-15 FINISH COAT @ 80
DFT/COAT PIPES NB: .5
Inches NB: .75
Inches NB: 1
Inches NB: 1.5
Inches NB: 2
Inches VALVES -
NB: 2
Inches -
***************************************************************
LEGENDS / NOTES FOR INSULATION WORKS
***************************************************************
** Types of Insulation :
IH/HC/H = Insulation for Heat Conservation
IT/ST/T = Insulation for Steam Traced Lines
IS/PP/P = Insulation for Personal Safety
IC
= Cold Insulation for Anti-condensation
IE/ET = Insulation for Electrically Traced Lines
IJ
= Insulation for Jacketed Lines
IK
= Insulation for Dual Insulated Lines
** Basic Line Surface Materials :
CS = Carbon Steel (Including LT Carbon Steel)
AS = Alloy Steel
SS = Stainless Steel
** Notes :
1. For insulation type IT/ST/T,tracer size and tracer numbers shall be as per
specification.
2. Insulation thickness for IC where insulation material is Poly Urethane foam (PUF) /
Poly Isocyanurate (PIC) + Cellular Glass includes outer layer of 50mm of Cellular
Glass and Inner layer of balance thickness of PUF/PIC
3. Insulation for IE/ET consists of inner layer of Rockwool and outer layer of PUF /PIC. The
thicknesses have been specified as THK(I) and THK(O) for inner and outer
layers respectively.
*************************************************************** -
NB 2.000
INCHES; THICKNESS 65 MM NB 3.000
INCHES; THICKNESS 25 MM NB 3.000
INCHES; THICKNESS 40 MM NB 3.000
INCHES; THICKNESS 50 MM NB 3.000
INCHES; THICKNESS 65 MM NB 3.000
INCHES; THICKNESS 75 MM NB 4.000
INCHES; THICKNESS 25 MM NB 4.000
INCHES; THICKNESS 40 MM NB 4.000
INCHES; THICKNESS 65 MM NB 4.000
INCHES; THICKNESS 75 MM NB 6.000
INCHES; THICKNESS 40 MM NB 6.000
INCHES; THICKNESS 65 MM NB 8.000
INCHES; THICKNESS 40 MM NB 8.000
INCHES; THICKNESS 50 MM NB 8.000
INCHES; THICKNESS 65 MM NB 8.000
INCHES; THICKNESS 75 MM NB 8.000
INCHES; THICKNESS 90 MM NB10.000
INCHES; THICKNESS 40 MM NB10.000
INCHES; THICKNESS 50 MM NB10.000
INCHES; THICKNESS 65 MM NB10.000
INCHES; THICKNESS 90 MM NB12.000
INCHES; THICKNESS 40 MM NB12.000
INCHES; THICKNESS 50 MM NB12.000
INCHES; THICKNESS 65 MM NB12.000
INCHES; THICKNESS 90 MM NB14.000
INCHES; THICKNESS 40 MM NB14.000
INCHES; THICKNESS 50 MM NB14.000
INCHES; THICKNESS 65 MM NB16.000
INCHES; THICKNESS 40 MM NB16.000
INCHES; THICKNESS 50 MM NB18.000
INCHES; THICKNESS 50 MM NB30.000
INCHES; THICKNESS 40 MM FLANGE ASSEMBLIES NB 0.500
INCHES; THICKNESS 25 MM NB 0.500
INCHES; THICKNESS 65 MM NB 1.500
INCHES; THICKNESS 25 MM NB 1.500
INCHES; THICKNESS 50 MM NB 1.500
INCHES; THICKNESS 65 MM NB 2.000
INCHES; THICKNESS 25 MM NB 2.000
INCHES; THICKNESS 40 MM NB 2.000
INCHES; THICKNESS 50 MM NB 2.000
INCHES; THICKNESS 65 MM NB 3.000
INCHES; THICKNESS 40 MM NB 3.000
INCHES; THICKNESS 50 MM NB 3.000
INCHES; THICKNESS 65 MM -
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB16.000
INCHES; THICKNESS
BLIND FLANGE ASSEMBLIES NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
VALVE ASSEMBLIES NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
40 MM 65 MM 75 MM 40 MM 65 MM 90 MM 40 MM 40 MM 50 MM 25 MM 40 MM 50 MM 65 MM 40 MM 50 MM 40 MM 25 MM 40 MM 50 MM 65 MM 75 MM 25 MM 65 MM 75 MM 40 MM 65 MM 90 MM 40 MM 65 MM 25
40
50
65
25
40
50
65
25
40
50
65
40
50
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
NB 2.000
NB 2.000
NB 2.000
NB 2.000
NB 3.000
NB 3.000
NB 3.000
NB 3.000
NB 4.000
NB 4.000
NB 4.000
NB 6.000
NB 6.000
NB 8.000
NB 8.000
NB 8.000
NB 8.000
NB12.000
NB16.000
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
25 MM 40 MM 50 MM 65 MM 40 MM 50 MM 65 MM 75 MM 40 MM 65 MM 75 MM 40 MM 65 MM 50 MM 65 MM 75 MM 90 MM 65 MM 40 MM -
NB12.000
NB 6.000
NB 8.000
NB10.000
NB12.000
NB16.000
NB18.000
NB20.000
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
INCHES; THICKNESS
25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM -
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
NB16.000
INCHES; THICKNESS
NB18.000
INCHES; THICKNESS
FLANGE ASSEMBLIES NB 1.500
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
NB16.000
INCHES; THICKNESS
BLIND FLANGE ASSEMBLIES NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
50
65
75
90
65
75
50
90
MM
MM
MM
MM
MM
MM
MM
MM
25 MM 40 MM 25 MM 40 MM 50 MM 65 MM 25 MM 40 MM 50 MM 65 MM 75 MM 25 MM 40 MM 65 MM 75 MM 40 MM 65 MM 90 MM 40 MM 65 MM 75 MM 90 MM 65 MM 75 MM 90 MM 65 MM 75 MM 50 MM 25
40
50
65
25
40
50
MM
MM
MM
MM
MM
MM
MM
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
VALVE ASSEMBLIES NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.500
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 0.750
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.000
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 2.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
40
50
75
65
90
MM
MM
MM
MM
MM
25 MM 40 MM 50 MM 25 MM 40 MM 50 MM 65 MM 25 MM 40 MM 50 MM 65 MM 25 MM 40 MM 50 MM 65 MM 25 MM 40 MM 50 MM 65 MM 25 MM 40 MM 50 MM 75 MM 25 MM 40 MM 65 MM 75 MM 40 MM 65 MM 90 MM 40 MM 65 MM 75 MM 90 MM 50 MM 65 MM 75 MM 90 MM 65 MM -
NB12.000
NB16.000
NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
NB 8.000
INCHES; THICKNESS
NB10.000
INCHES; THICKNESS
NB12.000
INCHES; THICKNESS
NB14.000
INCHES; THICKNESS
NB18.000
INCHES; THICKNESS
NB20.000
INCHES; THICKNESS
NB24.000
INCHES; THICKNESS
NB30.000
INCHES; THICKNESS
FLANGE ASSEMBLIES NB 4.000
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
BLIND FLANGE ASSEMBLIES NB 0.750
INCHES; THICKNESS
VALVE ASSEMBLIES NB 0.750
INCHES; THICKNESS
NB 1.500
INCHES; THICKNESS
NB 6.000
INCHES; THICKNESS
25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM 25 MM -
NB12.000
INCHES; THICKNESS
NB14.000
INCHES; THICKNESS
NB16.000
INCHES; THICKNESS
NB16.000
INCHES; THICKNESS
NB18.000
INCHES; THICKNESS
NB18.000
INCHES; THICKNESS
NB20.000
INCHES; THICKNESS
NB20.000
INCHES; THICKNESS
NB24.000
INCHES; THICKNESS
NB24.000
INCHES; THICKNESS
NB30.000
INCHES; THICKNESS
NB30.000
INCHES; THICKNESS
NB36.000
INCHES; THICKNESS
NB36.000
INCHES; THICKNESS
NB42.000
INCHES; THICKNESS
FLANGE ASSEMBLIES NB 1.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
NB 3.000
INCHES; THICKNESS
VALVE ASSEMBLIES NB 4.000
INCHES; THICKNESS
25
25
25
40
25
40
65
75
25
40
25
75
40
75
75
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
MM
40 MM 25 MM 40 MM 50 MM -
Units
Quantity
Inch
Inch
Inch
Inch
Inch
Dia
Dia
Dia
Dia
Dia
2260
73560
35515
9995
4170
Inch
Inch
Inch
Inch
Inch
Dia
Dia
Dia
Dia
Dia
46345
210
65
65
65
Inch
Inch
Inch
Inch
Inch
M
M
M
M
M
34090
88520
48675
23630
11410
Inch
Inch
Inch
Inch
Inch
Inch
Dia
Dia
Dia
Dia
Dia
Dia
185
5290
14510
8405
5900
2500
Inch Dia
Inch Dia
70
65
Inch
Inch
Inch
Inch
Inch
Inch
M
M
M
M
M
M
Inch Dia
Inch Dia
370
6270
15175
14480
7505
9555
340
17595
Inch Dia
Inch Dia
5140
1740
Inch Dia
9625
Inch
Inch
Inch
Inch
M
M
M
M
8130
21940
11665
3565
Inch Dia
115
Inch M
130
Inch Dia
Inch Dia
60
360
Inch Dia
1140
Inch M
Inch M
575
485
Inch Dia
Inch Dia
Inch Dia
105
4170
465
Inch Dia
2410
Inch M
Inch M
Inch M
540
2035
500
Inch
Inch
Inch
Inch
15
5950
6590
350
Dia
Dia
Dia
Dia
Inch M
Inch M
Inch M
4725
7710
335
Inch Dia
Inch Dia
5
280
Inch M
110
Inch Dia
Inch Dia
Inch Dia
100
4215
410
Inch Dia
1960
Inch M
Inch M
Inch M
810
4575
55
Inch Dia
Inch Dia
350
1250
Inch M
Inch M
275
3210
Inch Dia
Inch Dia
Inch Dia
10
5
740
Inch M
750
Metres
10
Metres
Metres
35465
215
Nos
Nos
7
66
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
21
20
2217
801
337
398
312
108
46
10
38
4
9
12
3
1
7
4
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
3
66
51
40
31
30
36
25
7
7
5
1
3
3
1
Nos
Nos
Nos
Nos
Nos
3
9
1
10
Nos
Nos
1
26
Nos
Nos
Nos
Nos
Nos
Nos
23
4
14
27
7
8
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
3
8
4
46
1
1
3
3
Nos
Nos
Nos
Nos
Nos
Nos
Nos
16
14
8
8
1
7
23
Nos
Nos
Nos
18
49
10
Nos
Nos
Nos
1
4
20
Nos
Nos
7
3
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Inches
Inches
MT
MT
MT
16
3
20
1
5
3
3
1
3
1
1
1
1
1
1
14541
48191
14
5
7
MT
MT
MT
60
3
16
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
3
25
9
10
3
3
3
3
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
2315
6423
4164
3138
12225
4880
2258
3229
4280
1690
788
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
Inch
325
462
212
52
402
68
416
150
151
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Dia
Inch M
Inch M
3655
1220
4875
4875
25
10
30
30
440
150
590
590
5
5
5
5
6695
25
Inch M
Cu. M
Cu. M
MT
0.3
0.3
Inch Dia
Inch Dia
100
510
Inch Dia
130
Inch M
Inch M
60
270
Inch Dia
735
Inch Dia
Inch Dia
375
295
Inch Dia
330
Inch M
Inch M
1010
160
Cu. M
0.25
Metres
Metres
Metres
10
5
10
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
70
40
5
190
25
10
105
185
Metres
485
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
35
70
5
205
280
225
300
345
200
15
70
250
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
5
5
110
80
10
360
5
30
Nos
Nos
9
216
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
57
62
1052
490
257
270
3
1
Nos
Nos
Nos
Nos
Nos
Nos
125
103
104
922
538
5
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
4
14
7
26
680
53
338
710
905
289
211
70
78
23
10
39
7
39
14
13
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
3
53
14
16
263
122
65
68
1
1
Nos
Nos
Nos
Nos
Nos
Nos
31
26
26
230
134
1
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
1
4
1
7
170
13
85
178
226
73
52
18
20
7
3
10
1
9
4
4
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
3
66
51
40
31
30
36
25
7
7
5
1
3
3
1
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
1
26
23
4
14
27
7
8
Nos
Nos
Nos
182
8
138
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
150
282
98
38
55
30
9
1
5
1
1
1
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
161
182
100
601
228
329
166
285
130
59
5
72
4
16
12
9
12
Nos
12
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
44
139
228
991
358
199
369
667
87
35
27
7
3
36
17
Nos
Nos
Nos
Nos
Nos
Nos
Nos
22
17
182
13
65
27
17
Nos
Nos
Nos
Nos
Nos
Nos
7
85
20
4
4
9
Nos
33
Nos
Nos
Nos
Nos
Nos
Nos
10
10
10
10
10
10
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
10
10
10
10
10
10
10
10
10
10
10
10
10
10
MANDAY
1222
MANDAY
MANDAY
Nos
4889
4889
143
Nos
Sq. m
Inches
533
25
72
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
345
380
255
5
450
635
625
175
20
53
22
8
35
9
8
9
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
155
500
750
650
780
550
75
55
75
30
35
35
100
25
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
207
61
7
5
3
3
3
3
Metres
Metres
Metres
Metres
1950
40
60
25
Metres
Metres
Metres
Metres
Metres
Metres
820
2540
5445
3340
7020
2720
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
2510
1985
1770
1735
55
40
165
125
25
295
255
738
289
100
94
81
59
4
4
4
3
5
42205
1030
3185
5675
8175
5615
3775
4665
3555
1260
995
360
1130
220
165
225
90
300
Metres
Metres
150
285
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
703
308
152
190
144
47
17
5
25
5
7
3
7
4
Metres
Metres
Metres
Metres
Metres
25
5
85
350
20
Nos.
Nos.
135
1
Metres
Metres
Metres
Metres
Metres
605
10
25
40
120
Nos.
Metres
1105
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
65
40
55
235
605
325
495
245
55
80
50
120
NOs
NOs
NOs
NOs
4
4
5
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
20
55
10
20
35
205
80
40
55
1700
280
560
10
2035
120
10
505
1965
650
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
2000
120
750
375
665
125
10
1050
455
15
725
1125
230
535
505
160
380
145
50
210
15
50
95
365
30
50
30
60
165
185
35
145
4
3
3
4
4
4
5
8
53
8
4
5
NOs
NOs
NOs
NOs
NOs
NOs
NOs
5
1
3
5
3
1
3
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
Nos
NOs
NOs
NOs
NOs
NOs
NOs
NOs
1
1
26
200
109
52
10
13
4
4
9
4
1
4
4
5
5
1
1
3
1
1
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
3
40
7
5
46
255
113
74
12
107
31
62
52
21
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
18
124
36
211
33
18
64
8
17
4
3
7
33
13
3
9
5
3
4
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
10
10
10
10
10
10
115
85
205
30
30
95
75
30
NOs
NOs
NOs
NOs
NOs
3
9
1
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
50
80
120
810
1010
295
635
95
65
50
425
35
65
40
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
3
12
10
14
7
1
1
1
9
1
3
5
NOs
NOs
NOs
NOs
48
44
7
1
NOs
NOs
NOs
NOs
NOs
NOs
NOs
16
79
47
36
77
47
25
NOs
NOs
NOs
NOs
NOs
NOs
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
29
1
3
4
17
4
3
10
10
20
10
55
105
10
10
40
55
50
10
120
50
15
10
875
385
40
170
1635
120
15
75
20
660
215
20
445
205
15
400
40
140
20
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
120
35
165
15
65
60
95
30
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
3
16
1
9
4
7
1
7
1
1
16
4
13
31
3
8
17
3
4
1
7
3
1
1
1
1
5
4
NOs
NOs
NOs
NOs
NOs
NOs
NOs
5
83
3
3
5
36
70
NOs
NOs
NOs
NOs
NOs
5
1
1
3
1
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
3
8
4
7
104
10
3
5
38
74
17
3
25
53
8
1
96
83
18
9
70
9
25
3
20
16
3
30
30
3
18
3
13
3
7
4
1
1
13
NOs
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
3
1
30
105
60
345
215
15
365
125
20
10
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
9
1
1
7
8
1
1
1
NOs
NOs
NOs
42
51
7
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
43
81
25
146
38
8
27
8
Metres
Metres
Metres
Metres
Metres
20
10
100
160
50
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
205
60
165
50
15
15
15
35
40
50
NOs
NOs
1
1
NOs
NOs
NOs
NOs
3
42
1
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
15
10
10
10
10
75
10
10
30
30
10
30
10
30
35
50
10
85
10
20
30
15
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
40
10
35
10
20
15
10
10
15
40
10
10
20
35
60
NOs
NOs
NOs
1
1
20
NOs
12
Metres
Metres
10
10
Metres
Metres
Metres
Metres
10
30
40
35
NOs
NOs
10
20
NOs
12
NOs
NOs
NOs
NOs
13
3
1
7
Metres
Metres
Metres
10
210
50
NOs
NOs
NOs
4
5
NOs
NOs
NOs
4
8
5