Professional Documents
Culture Documents
SiXCT
Installation Instructions
(4)
#6 x 3/4
(2)
#4 x 5/8
Terminal Block
Reed
Switch
Magnet
LED
Tamper
Switch
Mounting
The SiXCT can be mounted with several options:
Installation with magnet: Make gap is 0.75";
Break gap is 1.30".
Optional Wiring for Service loops:
a) surface wiring
b) concealed wiring
NOTE: Wiring limit is 3ft.
NOTE: After enrolling and before mounting the
device permanently, conduct Go/No Go tests (see
controllers instructions) to verify adequate signal
strength. Adjust the device location and orientation
as necessary.
*
*
*Optional
Serial Number
Loop Number
Zone Description 1
Zone Description 2
Device Type
Alarm Report
Panic
Response Type
Chime
Supervision
Home
PU
CON LL TO
NEC
T
0
10
45
20
30
The LED
Flashes; wait
up to about 20
seconds*
PU
CON LL TO
NEC
T
4
LED ON for
3 seconds
Battery Replacement
Push the bottom latch of the mounting
bracket back to disengage it. Then slide the
back housing, up and out to remove it from
the mounting bracket.
Slide the front and back housings in opposite
directions and pull the housings apart.
Remove the battery, wait 10 seconds, then
insert a new battery. Recommended
batteries:
Panasonic CR123A
Honeywell 466
Duracell DL123
Duracell DL123A
Place the front and back housings together
and slide them together as shown.
BATTERY CAUTION: Risk of fire, explosion and burns.
Do not recharge, disassemble, heat above 212 F (100 C)
or incinerate. Dispose of used batteries properly. Keep
away from children.
Wait 10
seconds
0
10
45
30
Honeywell 466
Duracell DL123
Duracell DL123A
Panasonic CR123A
Specifications:
Approval Listings:
FCC / IC
cETLus Listed
Conforms to UL 634
Certified to ULC/ORD-C634
Other Standards:
RoHS
Product must be tested at
least once each year
For the latest documentation and online support information, please go to:
https://mywebtech.honeywell.com/
For the latest warranty information, please go to:
www.honeywell.com/security/hsc/resources/wa.
For patent information, see www.honeywell.com/patents
MyWebTech
Warranty
Patents