Professional Documents
Culture Documents
Applications
Stuck
2
pipe
7 8
Unlimited
cut penetration
The Mechanical Pipe Cutter tool operates on any wireline and requires minimal surface equipment.
The Baker Hughes Mechanical Pipe Cutter (MPC) electromechanical pipe-cutting tool
reduces logistical and environmental constraints of stuck pipe or pipe recovery operations
by providing precise, downhole pipe cutting without the use of ballistics or hazardous
chemicals, reducing rigsite down time, personnel risk, and overall intervention costs.
The MPC tool performs its precise cutting without damaging external tubulars or control
lines. Cutting penetration is continuously measured and controlled from the surface,
confirming the cut has been made successfully. The MPC tools temperature and pressure
ratings allow operators to cut pipe in hotter and deeper environments, while eliminating
expensive and time-consuming coiled-tubing or pipe operations.
Tool Specifications
Tool length
18.16 ft (5.54 m)
Two sections
8.33 ft (2.54 m)
9.83 ft (3 m)
Tool diameter
2 1/8-in. (54-mm) tool cuts 2 7/8-in. (73-mm) to 4-in. (102-mm) pipe
2 1/2-in. (64-mm) tool cuts 4-in. (102-mm) to 4 1/2-in. (114-mm) pipe
3 1/4-in. (83-mm) tool cuts 4-in. (102-mm) to 7-in. (178-mm) pipe
Rating
392F (200C) and 20,000 psi (1,379 bar)
Current pipe cutting sizes
2
7/8-in.
The multiple, clean cuts provided by the MPC tool eliminate additional fish
milling and ensure efficient pipe-recovery operations.
www.bakerhughes.com
Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do
not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including
those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished as is
and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
2011 Baker Hughes Incorporated. All rights reserved. 33434