Professional Documents
Culture Documents
l If the SMT PC cannot communicate with the BTS, the Communication failed dialog box
is displayed, as shown in the following. Go to Step 2.
Step 3 In the Select Communication Port areas, click Network Port. In the Configure IP area,
set the
IP address to 192.168.0.72.
Step 4 Click OK.
The Site Maintenance Terminal System window is displayed.
Step 5 In the Site Maintenance Terminal System window, click User , and select User Login .
Enter user Name (Omc by default) and User Password (omc by default). Login to the BTS is
successful.
Double-click GTMU.
Right-click the RRU module to be queried and select Board Information from the shortcut
menu.
Right-click the GTMU to be queried and select Board Information from the shortcut menu.
Board
Board Management
Double-click GTMU
Right-click the RRU module
Reset
Board
Check whether there are major level alarms or critical level alarm.
Board
Board Management
Double-click GTMU
Right-click the RRU module
Board
alarm
Check whether there are major level alarms or critical level alarm.