Professional Documents
Culture Documents
Error Mode
Error
Water
level
sensor
abnormal
Display
Cause/Appearance of Error
Way of Release
IE
Power Off
tE1
Temperatu
re sensor tE2
abnormal
tE3
3E1
3E2
3E3
3E4
PHI
If both AC
power signal
and DC link
voltage are
normal, this
Plo
error will be
released and
proceed the
previous
operation.
Motor
driving
abnormal
Power
abnormal
- 19 -
Power Off
Start button
Main relay
18E
abnormal
Switch
(button)
abnormal
Unplug the
If AC power signal is detected for longer than 4sec even after
power plug, and
connection of power plug or after opening of the relay by power
PCB needs to
off, this error will occur.
repair.
12E
Power Off
14E
No pressing of a
button longer
than 1sec will
release this error.
Door
abnormal
dE
dE1
dE2
Excessive 0F
water
level/water
leakage
11E
Fan motor
F
abnormal
Water
Drain
abnormal
Communic
ation
13E
abnormal
Water
Feed
abnormal
Power will be
automatically off
after 5sec.
Automatically
released after
25sec.
If there is no
abnormal
If a communication to MCU on the control panel is abnormal for
communication
longer than 2sec, it functions to reset MCU to 20mSec and to
for longer than
retry the communication. Abnormal communication for longer
1sec, it is
than 6sec will make this error.
automatically
released.
If less than 20.48kHz of frequency of water level sensor is
continuously kept longer than 10sec, this error will occur.
(caused by abnormal increase of water level due to breakdown
Power Off
of feed valve)
Appearance: It functions to operate drain pump to the frequency
level of 23.30kHz in 20sec-On/4sec-Off.
If higher than 24.70kHz of frequency of water level sensor
during washing and rinse, this error will occur.
(caused by water leakage at pump, hose, drum tub, etc.)
Power Off
Power Off
4E
If the feed water for washing or rinse doesn't reach the terminal
Start button
level of water supply after 20min, this error will occur.
4Ed
EC
5E
- 20 -
Start button
Start button
Heater
abnormal
Cooling
abnormal
HE1
Power Off
HE2
Power Off
CE
Unbalance
UE
error
- 21 -
Start button