Professional Documents
Culture Documents
Operation Manual
Table of Content
I Using Environment....................................................................................2
II Installation Reminder................................................................................2
III Button Explanation..................................................................................4
IV Right way of pressing fingerprint...........................................................5
V Menu Operation........................................................................................6
VI Register....................................................................................................8
VII New Rge.................................................................................................9
VIII Password.............................................................................................11
VIIII ID Card..............................................................................................12
X Fp & Card...............................................................................................14
XI Fp & Password......................................................................................15
XII Admin...................................................................................................16
XIII Sup. User............................................................................................17
XIV U - Upload..........................................................................................17
XV Delete...................................................................................................18
XVI Set COMM.........................................................................................19
XVII LockCtrl............................................................................................22
XVIII Advanced.........................................................................................31
XVIIII Logs...............................................................................................33
XX Set Time...............................................................................................35
XXI Bell.....................................................................................................35
XXII ViewInfo............................................................................................36
XXIII Record Detail...................................................................................37
XXIV System Detail...................................................................................37
XXV Inquiry of in out record.....................................................................38
I Using Environment
1. It is better to avoid putting the fingerprint or card machine under shining of light. Shining
of light will degrade seriously the performance of the fingerprint sensor. It will cause the
failure of verification by fingerprint sensor.
2. The working temperature of the fingerprint/card machine should be in the range of 060.
Try to avoid using it in outdoor for a long time or the normal operation will be affected. If it
is really necessary to use it in outdoor, please try to use it in shaded area with radiating
equipment. In winter, we can add some warm facilities in company with it.
menggunakan Lingkungan
1
Operation Manual
1. Lebih baik untuk menghindari menempatkan sidik jari atau kartu mesin di bawah bersinar terang.
Bersinar cahaya akan menurunkan serius kinerja sensor sidik jari. Ini akan menyebabkan kegagalan
verifikasi oleh sensor sidik jari.
2. Suhu kerja mesin sidik jari / kartu harus dalam kisaran 0 -60 . Cobalah untuk menghindari
menggunakannya di luar ruangan untuk waktu yang lama atau operasi normal akan terpengaruh. Jika
itu benar-benar perlu untuk menggunakannya di luar ruangan, coba untuk menggunakannya di daerah
yang teduh dengan peralatan memancar. Di musim dingin, kita dapat menambahkan beberapa fasilitas
hangat di perusahaan dengan itu.
II Installation Reminder
1. Before installation, please make sure the power of the fingerprint/card device is off.
Installion with power on or cable connection with power on may damge the machine.
2. In season of Autum or Winter, human being has static electricity. Before installation, please
connect the wire of ground before others. This is to prevent damage of machine by instant static
electricity over voltage.
3. Please do not expose the socket. They must have cable plug inserted. Besides, please do not
expose the contact of electric wire to the air to prevent short circuit between 2 wires. To help
the identification of the electric wire, please use different color for different pin. For
example, we always use green color wire for grounding.
4. Before connecting the power cable, please do all the connection of other cables first. At
last, connecting the power cable. If some problem has been discovered, disconnect the power
immediately.
5. If the distance betwen the power socket and the fingerpint/card machine is very far away,
please do not use network cable for electric wire extension. The standard electric wire should
be used instead. Be remined that if the distance is far way, the voltage of the power adaptor
will be degraded continuously.
6. If user connects the cable wrongly causing the damage of the machine, the warranty will be
voided.
7. It is better to install the fingerprint/card machine at around 1.4 to 1.5 metres high.
instalasi Pengingat
1. Sebelum instalasi, pastikan kekuatan perangkat / kartu sidik jari off. Installion dengan
kekuatan atau koneksi kabel dengan daya mungkin damge mesin.
Operation Manual
2. Dalam musim Autum atau musim dingin, manusia memiliki listrik statis. Sebelum instalasi,
silahkan hubungkan kabel tanah sebelum orang lain. Hal ini untuk mencegah kerusakan mesin dengan
listrik statis instan tegangan lebih.
3. Jangan mengekspos soket. Mereka harus memiliki konektor kabel dimasukkan. Selain itu, jangan
mengekspos kontak kawat listrik ke udara untuk mencegah sirkuit pendek antara 2 kabel. Untuk
membantu identifikasi kawat listrik, gunakan warna yang berbeda untuk pin yang berbeda. Sebagai
contoh, kami selalu menggunakan kawat warna hijau untuk grounding.
4. Sebelum menghubungkan kabel listrik, silakan melakukan semua sambungan kabel lain pertama.
Akhirnya, menghubungkan kabel listrik. Jika beberapa masalah telah ditemukan, lepaskan listrik
segera.
5. Jika jarak betwen soket listrik dan mesin Fingerpint / kartu sangat jauh, jangan gunakan
kabel jaringan untuk perpanjangan kawat listrik. Kawat listrik standar harus digunakan sebagai
gantinya. Akan remined bahwa jika jaraknya cara yang jauh, tegangan dari adaptor daya akan
terdegradasi terus menerus.
6. Jika pengguna menghubungkan kabel salah menyebabkan kerusakan mesin, garansi akan voided.
7. Lebih baik untuk menginstal mesin sidik jari / kartu di tinggi sekitar 1,4 ke 1,5 meter.
Operation Manual
F2
F3
F4
ESC
MENU
OK
Fig 2-1
Button Description: Tombol Keterangan:
ESC
MENU
OK
* character
down arrow
screen
09
up arrow
screen
for
for
to invoke an
current screen
the
current
the
current
item
in
the
F1
F2
F3
F4
ESC keluar dari layar saat ini atau dan untuk membatalkan tindakan
MENU untuk mengakses item menu
OK untuk mengkonfirmasi layar saat
* * Karakter
panah untuk layar saat
panah bawah untuk layar saat
0 ... 9 untuk memohon item di layar saat
F1 untuk mengubah status saat ini untuk bertugas
F2 untuk mengubah status saat ini untuk tugas off
4
Operation Manual
Correct
not parallel
not in centre
tilt
Operation Manual
V Menu Operation
When the fingerprint/card machine is in idle mode, pressing the button "MENU" will go into the
main menu. To select a menu item, press the item numeric key and it will be invoked.
Operasi menu
Ketika mesin sidik jari / kartu dalam modus siaga, menekan tombol "MENU" akan masuk ke menu
utama. Untuk memilih item menu, tekan tombol numerik item dan akan dipanggil.
MENU
1. Register
2. Delete
3. Set COMM
4.LockCtrl
5. Advanced
ViewInfo
Operation Manual
Operation Manual
VI Register
In the machine idle state, press "MENU" to go into the main menu. If there is at least one
administrator in the fingerprint device, press menu button will require the administrator
fingerprint/card/password to access the menu.
Dalam mesin negara siaga, tekan "MENU" untuk masuk ke menu utama. Jika ada setidaknya satu
administrator di perangkat sidik jari, tombol menu tekan akan memerlukan administrator sidik jari
/ kartu / password untuk mengakses menu.
Menu
Register
Delete
Set COMM
LockCtrl
Advanced
Esc-ESC
Set-OK
Esc-ESC
In
1.
2.
3.
Set-OK
the menu item of "User", you can see 3 sub-items. They are
New Reg.
Backup
Threat FP
User
New Reg.
Backup
Threat FP
Esc-ESC
Set-OK
New Reg.
an user enroll the fingerprint the first time (or password or card)
Backup
an user enroll the second fingerprint (password or card)
8
Operation Manual
Threat FP
an user can only have 1 duress fingerprint
New Reg.
pengguna mendaftarkan sidik jari yang pertama kali (atau password atau kartu)
Backup
pengguna mendaftarkan sidik jari kedua (password atau kartu)
Ancaman FP
pengguna hanya dapat memiliki 1 paksaan sidik jari
ID 00000001
In the fingerprintEsc-ESC
enrollment Set-OK
screen, press fingerprint 2 times. If both image are near, the
enrollment succeed.
Pada layar pendaftaran sidik jari, tekan jari 2 kali. Jika kedua gambar yang dekat, pendaftaran
berhasil.
New Reg.
00000001-0
First Time
If the enrollment of fingerprint succeed, the machine will ask whether to continue to enroll
another user.
Jika pendaftaran sidik jari berhasil, mesin akan menanyakan apakah akan terus mendaftarkan
pengguna lain.
9
Operation Manual
New Reg.
Continue
Esc-ESC
Con-OK
Click "OK" button to continue another enrollment. Or, click "ESC" button to cause the menu to go
back to the enrollment method.
Klik tombol "OK" untuk melanjutkan pendaftaran lain. Atau, klik tombol "ESC" untuk menyebabkan
menu untuk kembali ke metode pendaftaran.
New Reg.
Finger
ID Card
Password
FP & Card
5 FP & Pass
Esc-ESC
Set-OK
Backup
A user can enroll the other fingerprint for backup purpose. In case the main fingerprint has
problem in verification, it can change to use another fingerprint.
The operation of backup enrollment is similar to that of the new enrollment. Backup enrollment
only could be done for existing user.
Threat FP(some fingerprint/card machine has this function)
To enroll duress fingerprint, select "User" -> " Threat FP ". If the duress fingerprint function
is on, the fingerprint/card machine could trigger the alarm when duress fingerprint is used in
verification.
Backup
Seorang pengguna dapat mendaftarkan sidik jari lain untuk tujuan cadangan. Dalam kasus sidi
k jari utama memiliki masalah dalam verifikasi, dapat mengubah menggunakan sidik jari yang l
ain.
Operasi pendaftaran cadangan adalah mirip dengan pendaftaran baru. Backup pendaftaran han
ya bisa dilakukan bagi pengguna yang sudah ada.
Ancaman FP (beberapa mesin sidik jari / kartu memiliki fungsi ini)
Untuk mendaftarkan sidik jari paksaan, pilih "User" -> "Ancaman FP". Jika fungsi paksaan sidik
jari pada, mesin sidik jari / kartu bisa memicu alarm ketika tekanan sidik jari digunakan dalam
verifikasi.
10
Operation Manual
VIII password
In the menu of " New Reg.", select "Password"
Dalam menu "New Reg.", Pilih "Password"
Password
ID 00000001
Esc-ESC
Set-OK
Input the user ID of the new user and click "OK" button to confirm.
Masukan user ID dari pengguna baru dan klik tombol "OK" untuk konfirmasi.
Password
ID 00000001
PWDIn
PWDIn
Esc-ESC
Set-OK
Input a new password of maximum 8 characters. After input, do the input again for verification.
If both values are the same, the enrollment succeed.
Masukan password baru dari maksimum 8 karakter. Setelah input, melakukan input lagi untuk
verifikasi. Jika kedua nilai adalah sama, pendaftaran berhasil.
VIIII ID Card
In the menu of "New Reg.", select "ID Card".
Dalam menu "New Reg.", Pilih "ID Card".
New Reg.
Finger
ID Card
Password
FP & Card
FP & Password
Esc-ESC
Set-OK
11
Operation Manual
Input the " ID" of the new user and click "OK" button to confirm.
Masukkan "ID" dari pengguna baru dan klik tombol "OK" untuk konfirmasi.
New Reg.
ID 00000001
Esc-ESC
Set-OK
In Card NO.
Esc-ESC
Set-OK
X Fp& Card
In the menu of New Reg., select FP & Card.
Dalam menu "New Reg.", Pilih "FP & Card".
New Reg.
FP
ID Card
Password
4 FP & Card
5 FP & Password
Esc-ESC
Set-OK
New Reg.
ID 00000001
12
Esc-ESC
Set-OK
Operation Manual
Swipe a card in the card sensing area. In the fingerprint enrollment screen, use a finger to press
2 times. If both pressing are ok, the enrollment is succeeded.
Menggesek kartu di daerah penginderaan kartu. Pada layar pendaftaran sidik jari, gunakan jari
untuk menekan 2 kali. Jika kedua menekan ok, pendaftaran tersebut berhasil.
In Card NO.
FP&Card
0000000001-8
First time
Note: After the enrollment of fingerprint & card, you can try the verification. Either pressing
fingerprint or swipe your card and then press fingerprint.
Catatan: Setelah pendaftaran sidik jari & kartu, Anda dapat mencoba verifikasi. Entah menekan
sidik jari atau menggesek kartu Anda dan kemudian tekan sidik jari.
XI Fp & Password
In the New Reg., select FP&Password.
Dalam "New Reg.", Pilih "FP & Password".
New Reg.
FP
ID Card
3 Password
4 FP & Card
5 FP & Password
Esc-ESC
Set-OK
Input a user ID and click OK. Press a finger 2 times. If both pressing are ok, input the same
password 2 times. Now the enrollment is succeeded.
Masukan user ID dan klik "OK". Tekan jari 2 kali. Jika kedua menekan ok, masukan password yang
sama 2 kali. Sekarang pendaftaran tersebut berhasil.
13
Operation Manual
New Reg.
ID 00000001
Esc-ESC
Set-OK
New Reg.
PWDIn
PWDIn
Esc-ESC
Note: In
password
Catatan:
password
Set-OK
the verification, press fingerprint and you will be prompted to input the password. If
is correct, the verification is ok.
Dalam verifikasi, tekan sidik jari dan Anda akan diminta untuk memasukkan password. Jika
sudah benar, verifikasi ok.
XII Admin
Enrollment of administrator is to prevent normal user from chaning the fingerprint machine
parameter. The method is the same as that of user. The enrolled administrator has no difference
in normal operation. The operation of administrator will be logged in the fingerprint machine.
Pendaftaran administrator adalah untuk mencegah user biasa dari chaning parameter mesin sidik
jari. Metode ini sama dengan pengguna. administrator terdaftar tidak memiliki perbedaan dalam
operasi normal. Operasi administrator akan dicatat dalam mesin sidik jari.
XIII Sup.User
Super user is equal to lower level administrator. It only has partial administration rights. The
enrollment of it is the same as normal user.
Difference : Super user only has rights of user enrollment, download data (u disk download
in out records, modification of IP and so on).
To enroll super user, we need to have at least one administrator. In the normal operation, super
user has no difference. The operation of super user in the fingerprint/card machine has been
logged in the machine.
Super user sama dengan administrator tingkat yang lebih rendah. Hanya memiliki hak
14
Operation Manual
XIV U- Upload
We can use U disk to upload enrollment information. The enrollment information is downloaded from
one machine. Please be noted that the device number of the enrollment information must be the
same as that of the target machine.
For example, the downloaded enrollment is in file afp_001.dat. 001 is the machine id. The target
machine must also have the same machine id of 001.
Kita dapat menggunakan U disk untuk meng-upload informasi pendaftaran. Informasi pendaftaran didownload dari satu mesin. Harap dicatat bahwa jumlah perangkat informasi pendaftaran harus sama
seperti yang dari mesin target.
Misalnya, pendaftaran download ada di file afp_001.dat. 001 adalah mesin id. Mesin target juga
harus memiliki id mesin yang sama dari 001.
XV Delete
In the main menu, select Delete.
Dalam menu utama, pilih "Hapus".
Menu
1 Register
2 Delete
3 Set COMM
4 lockCtrl
5 Advanced
Esc-ESC
Input the user ID for deletion.
Masukkan ID pengguna untuk penghapusan.
Set-OK
Delete
ID 00000001
15
Operation Manual
Delete
Sure to delete
No-ESC
Yes-OK
Continue
Esc-ESC
Continue-OK
Esc-ESC
Set-OK
U down
This item is to download in out records and enrollment information to U disk.
RS485 Dwnld
This is to set the RS485 communication speed in bits per second.
Ethernet
This is to set the parameter for TCP/IP connection. It has IP address, subnet mask, gateway. Set
it according to the actual requirement.
U Disk Download
16
Operation Manual
Download data
C) Select Glog&Del to download in out record into the U disk as a text file. The file name
will look like GLG_001.txt.
D) Take out the U disk and insert it into the computer. In the attendance software, select get
u disk enrollment to get the enrollment information into software.
2USB Connection
This is for USB cable communication between computer and the fingerprint machine.
3RS485 Connection
17
Operation Manual
By using RS485 to 232 connector, the communication distance could be extended into 800 meters or
more.
It is suggested to use baud rate of 9600 bps for rs485 communication which will give a stable
data transfer.
4 Ethernet Communication
the default IP address of ethernet communication is 192.168.1.224. This is the legal IP address
in a lot of LAN. Please set the corresponding subnet mask and gateway.
Note: If fingerprint/card machine is connected with computer directly, we need to use ethernet
10/100 base-t cross over cable.
download informasi pendaftaran
A) Insert U disk ke disk U soket dari mesin sidik jari.
B) Pilih menu -> U - bawah.
C) Pilih "Enr.Data" untuk men-download semua informasi pendaftaran (Info sidik jari, nama dan
sebagainya) ke dalam U disk sebagai file AFP_001.dat.
D) Keluarkan disk U dan masukkan ke komputer. Dalam software absensi, pilih "mendapatkan disk
u pendaftaran" untuk mendapatkan informasi pendaftaran ke dalam perangkat lunak.
Catatan: Operasi di atas perlu dilakukan lagi setelah pengguna baru terdaftar ke dalam mesin
sidik jari / kartu.
Data Unduh
A) Insert U disk ke disk U soket dari mesin sidik jari.
B) Pilih menu -> U - bawah.
C) Pilih "Glg & Del" untuk men-download di record ke dalam U disk sebagai file teks. Nama
file akan terlihat seperti "GLG_001.txt".
D) Keluarkan disk U dan masukkan ke komputer. Dalam software absensi, pilih "mendapatkan disk
u pendaftaran" untuk mendapatkan informasi pendaftaran ke dalam perangkat lunak.
2) USB Connection
Ini adalah untuk komunikasi kabel USB antara komputer dan mesin sidik jari.
3) Koneksi RS485
Dengan menggunakan RS485 untuk 232 konektor, jarak komunikasi dapat diperpanjang menjadi 800
meter atau lebih.
Disarankan untuk menggunakan baud rate 9600 bps untuk komunikasi rs485 yang akan memberikan
18
Operation Manual
XVII LockCtrl
1 Time Setting
1.1 Day Period
We can set the daily time set according to the actual requirement. For example,
we may set only 6:00 to 8:00 can open the door or 17:00 to 19:00 can open the
door. The following table is an example of opening door time zone per day.
Pengaturan 1 Waktu
Periode 1.1 Day
Kita bisa mengatur waktu sehari-hari diatur sesuai dengan kebutuhan yang
sebenarnya. Sebagai contoh, kita dapat menetapkan hanya 6:00-08:00 bisa membuka
pintu atau 17:00-19:00 dapat membuka pintu. Tabel berikut adalah contoh membuka
zona waktu pintu per hari.
1
06:00
08:00
17:00
19:00
00:00
00:00
00:00
00:00
00:00
00:00
The following example shows that user can open door all the time per day.
Contoh berikut ini menunjukkan bahwa pengguna dapat membuka pintu sepanjang waktu per
hari.
00:00
23:59
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
Operation Manual
example, Monday to Friday will use time set 1. And, Saturday to Sunday will use time set 2 (can
open door all the time).
1.2 Week Periode
Sesuai dengan kebutuhan pengguna, kita dapat mengatur setiap hari dalam seminggu untuk
menggunakan waktu yang berbeda set. Misalnya, hari Senin sampai Jumat akan menggunakan waktu yang
ditetapkan 1. Dan, Sabtu sampai Minggu akan menggunakan waktu yang ditetapkan 2 (bisa membuka
pintu sepanjang waktu).
1
1
1
1
1
1
2
2
Catatan: Dalam mesin sidik jari / kartu, waktu mingguan mengatur 0 mewakili
membuka pintu sepanjang waktu. Waktu set Weely lainnya memiliki default tidak
memungkinkan pintu dibuka. default untuk waktu harian set memungkinkan pintu
terbuka sepanjang waktu.
2 Lock Register
Input the user ID for setting.
2 Kunci Register
Masukkan ID pengguna untuk pengaturan.
Lock Register
ID 00000001
Lock Register
Misalnya, pengguna dengan ID pengguna dari kelompok 00000001. Ini adalah 1 dan harian waktu yang
Group
1
ditetapkan adalah 1.
Week period
1
Effective Date
20
Esc-ESC
Set-OK
Operation Manual
If the user do verification, the fingerprint/card machine will determine the group of the user
and see whether it has rights of opening door. If the verification time is within the allowed
time zone of the group, the door will be opened. Otherwise, the door will not be opened.
Jika pengguna melakukan verifikasi, mesin sidik jari / kartu akan menentukan kelompok pengguna
dan melihat apakah ia memiliki hak membuka pintu. Jika waktu verifikasi dalam zona waktu yang
diizinkan kelompok, pintu akan dibuka. Jika tidak, pintu tidak akan dibuk
3 Unlock Group
Group1
Group 2
Group 3
Group 4
Group 5
0
0
0
0
0
It is to set the unlock group of users. For example, if we set a group of 12, it means user of
group 1 needs to be present with user of group 2 for opening door.
Example 1, Single unlock group
For example, we have group one of only time set 1.
Group1
Group2
Group5
111
Group2
No
Group10
No
In the above setting, we can see the first unlock group has 111. It means any 3 members of user
group 1 need to pass the verification for the door to be opened within the time zone.
Hal ini untuk mengatur kelompok unlock pengguna. Sebagai contoh, jika kita menetapkan kelompok
21
Operation Manual
dari 12, itu berarti pengguna dari kelompok 1 harus hadir dengan pengguna kelompok 2 untuk
membuka pintu.
Dalam hal ini, setiap pengguna dari kelompok 1 dapat membuka pintu hanya.
Dalam pengaturan di atas, kita dapat melihat kelompok unlock pertama memiliki 111. Ini berarti
setiap 3 anggota kelompok pengguna 1 harus lulus verifikasi untuk pintu akan dibuka dalam zona
waktu.
12
Group2
No
Group10
No
In the above setting, unlock group 1 has 12. It means a member of user group 1 and 2 must pass
verification before door can be opened. Any one of them could not open door solely.
Note : If the unlock group definition default does not have any setting, all users could not open
door. In the fingerprint/card machine, the default setting of unlock group 1 is user group 1. So,
any users of user group 1 can open door.
Contoh 3: Aktifkan grup dengan single user dari pengguna yang berbeda.
group1 12
group2 Tidak ada
...
Group10 ada
Dalam pengaturan di atas, membuka kelompok 1 memiliki 12. Ini berarti anggota dari kelompok
pengguna 1 dan 2 harus lulus verifikasi sebelum pintu dapat dibuka. Salah satu dari mereka tidak
bisa pintu terbuka semata-mata.
22
Operation Manual
Catatan: Jika kelompok membuka definisi default tidak memiliki pengaturan apapun, semua pengguna
tidak bisa membuka pintu. Di mesin sidik jari / kartu, pengaturan default dari kelompok unlock 1
adalah kelompok pengguna 1. Jadi, setiap pengguna dari kelompok pengguna 1 dapat membuka pintu.
4 Unlock Time
It is the time between the lock relay effective and the state of resume normal. The range of
value is 1-255 in second. The default is 5 seconds.
6 Threat Proc
It is to set one of the fingerprint for triggering the alarm during verification. This function
is used when someone hijack the user to open the door. The action could be door opening + alarm,
alarm only or door opening only.
6 Ancaman Proc
23
Operation Manual
Hal ini untuk mengatur salah satu sidik jari untuk memicu alarm saat verifikasi. Fungsi ini
digunakan ketika seseorang membajak pengguna untuk membuka pintu. tindakan bisa menjadi pembuka
pintu + alarm, alarm saja atau membuka pintu saja.
Setting
No
Description
Turn off the duress fingerprint alarm
Door
7 Alarm Proc
This function is used for connecting alarm sensor to the fingerprint/card machine for triggering
the alarm by its internal relay.
7 Alarm Proc
Fungsi ini digunakan untuk menghubungkan sensor alarm untuk mesin sidik jari / kartu untuk memicu
alarm dengan relay internal nya.
LockCtrl
7. Alarm Proc
No
8. Lurk Proc
No
9.Inter Lock
No
10 Users
No
11.Verify-Fail Count
No
Esc-ESC
Set-OK
Setting
Description
No
Even alarm action happens, the fingerprint/card machine does not send
alarm signal
Bahkan tindakan alarm terjadi, mesin sidik jari / kartu tidak
mengirim sinyal alarm
24
Operation Manual
Factory
setting
No
8 Lurk Proc
When anti-passback is set to 1 or 2, the function will be on as follows:
Ketika anti-passback diatur ke 1 atau 2, fungsi akan sebagai berikut:
LockCtrl
7. Alarm Proc
No
8. Lurk Proc
No
9.Inter Lock
No
10 Users
No
11.Verify-Fail Count
No
Esc-ESC
Setting
No
Set-OK
Description
Anti-passback is off
Anti-passback adalah off
Host
inside
Host
outside
When anti-passback is turned on in the fingerprint/card machine, the transaction record will have
the mark of in/out according to the setting in the anti-passback.
After the anti-passback is on, the verification must be in pair between main controller and
reader.
Ketika anti-passback dihidupkan dalam mesin sidik jari / kartu, catatan transaksi akan memiliki
25
Operation Manual
9 Inter Lock
This is to turn on the function of double door exclusive locking.
10 Users
This is to set the number of different users verifcation for opening door. For example, if it is
set to 2, 2 different users' succeeded verification can only open the door.
11 Verify-Fail Count
This is to set the number of times of failure in verification for triggering the alarm. For
example, it is set to 5. It means the alarm will be fired after 5 times failure of verification
by fingerprint or password or cared.
9 Inter Lock
Hal ini untuk mengaktifkan fungsi ganda penguncian pintu eksklusif.
10 Pengguna
Ini adalah untuk mengatur jumlah pengguna yang berbeda verifcation untuk membuka pintu. Sebagai
contoh, jika sudah diatur untuk 2, verifikasi 2 pengguna yang berbeda 'berhasil hanya membuka
pintu.
11 Verifikasi-Fail Hitung
Ini adalah untuk mengatur berapa kali kegagalan dalam verifikasi untuk memicu alarm. Misalnya,
sudah diatur untuk 5. Ini berarti alarm akan dipecat setelah 5 kali gagal verifikasi oleh sidik
jari atau password atau peduli.
LockCtrl
8. Lurk Proc
No
9. Inter Lock
No
10 Users
No
11 Verify-Fail Count
12. Wiegan
26
Esc-ESC
No
Set-OK
12 Wiegan
This is to set the format of wiegand (number of bits). The default is 26 bits.
You can set it to 34 bits.
12 Weigand
26
Operation Manual
Ini adalah untuk mengatur format Weigand (jumlah bit). default adalah 26 bit. Anda dapat
mengaturnya untuk 34 bit.
XVIII Advanced
Advanced setting has 4 modules. They are terminal setting, record setting, time setting and time
bell.
Pengaturan lanjutan memiliki 4 modul. Mereka adalah pengaturan terminal, catatan pengaturan,
pengaturan waktu dan waktu bel.
Advanced
1. Device
2. Logs
3.Set time
4.Bell
Esc-ESC
Set-OK
Description
Range
Defaul
t
Machine ID
1-255
1-10
Multi
English
1-10
the fingerprint/card
machine
pengenal
unik
dari
Language
Volume
untuk
Operation Manual
mengatur
saver
idle
No/1-255
No
untuk
verification method
Multi
F/P/C
Upload UI
n/a
No
n/a
n/a
n/a
n/a
machine
metode
verifikasi
Setting
to factory default
mengembalikan parameter
mesin ke default pabrik
Manager
Cancel
to normal user
downgrade
semua
mesin
F/C/P
C+F
F+P
28
Operation Manual
XVIIII Logs
7.2.1 ARec Wrn
The fingerprint/card machine will record all the operation by administrator(e.g. enrolling a new
fingerprint, delete a fingerprint). The maximum record to store is 1000 pieces. When the number
of stored record will reach 1000 after a threshold, the machine will alert " ARec Wrn d" in the
screen. Management Threshold is the number of records remaining for reaching the maximum 1000
pieces.
For example, the management threshold record is set to 100. When the storage of management record
reaches 900, the machine will display the alert " ARec Wrn ".
7.2.1 Arec WRN
Mesin sidik jari / kartu akan mencatat semua operasi oleh administrator (mis. Mendaftarkan sidik
jari baru, menghapus sidik jari). Rekor maksimum untuk menyimpan 1000 buah. Ketika jumlah record
yang tersimpan akan mencapai 1000 setelah ambang batas, mesin akan mengingatkan "Arec WRN d" di
layar. Manajemen Threshold adalah jumlah record yang tersisa untuk mencapai maksimum 1000 lembar.
Misalnya, catatan ambang manajemen diatur ke 100. Ketika penyimpanan catatan manajemen mencapai
900, mesin akan menampilkan peringatan "Arec WRN".
7.2.2 URec Wrn
The operation of this is similar to that of the management record. The only difference is that it
is for in out record, not management record. For example, the in out threshold is set to 1500.
When the in out records reach 98501, the machine will display the alert of " URec Wrn". When the
in/out storage record reaches 100000, you will both see the alert and not allow to do
verification again till the in out records has been deleted.
7.2.2 URec WRN
Operasi ini mirip dengan catatan manajemen. Satu-satunya perbedaan adalah bahwa dalam catatan
keluar, tidak record manajemen. Sebagai contoh, di luar ambang batas diatur ke 1500. Ketika di
luar catatan mencapai 98.501, mesin akan menampilkan peringatan dari "URec WRN". Ketika in / out
record penyimpanan mencapai 100.000, Anda akan baik melihat peringatan dan tidak memungkinkan
untuk melakukan verifikasi lagi sampai di luar catatan telah dihapus.
7.2.3 Reverify
It is to check whether user will do verification continuously within a period. It is suggested to
set this value to 5 minutes. If a user do verification other than the first time within the
setting period, the fingerprint/card machine will voice out (reverify). The record will not be
stored in the machine.
7.2.3 Verifikasi ulang
Hal ini untuk memeriksa apakah pengguna akan melakukan verifikasi terus menerus dalam jangka
29
Operation Manual
waktu. Disarankan untuk menetapkan nilai ini untuk 5 menit. Jika pengguna melakukan verifikasi
selain pertama kalinya dalam periode pengaturan, mesin sidik jari / kartu akan menyuarakan
(verifikasi ulang). Rekor tidak akan disimpan dalam mesin.
XX Set time
In the adanced menu, select "Set time" to connect the clock of the fingerprint/card machine. When
the machine is released from factory, the time of the machine is already set to Beijing area. If
it is not correct to the user region time, you can use this item to correct it.
Dalam menu adanced, pilih "Atur waktu" untuk menghubungkan jam dari mesin sidik jari / kartu.
Ketika mesin dilepaskan dari pabrik, saat mesin sudah diatur ke daerah Beijing. Jika tidak benar
untuk waktu wilayah pengguna, Anda dapat menggunakan item ini untuk memperbaikinya.
Set t time
Time
FRI
2013-01-01
16 12
XXI Bell
In Advanced, select Bell.
Dalam "Advanced", pilih "Bell".
Bell
1 Count
2 Time
Count
Esc-ESC
: Number of times for the bell to ring.
Set-OK
Time
: This is to set the time for the bell to ring.The maximum allowed time is 8.
30
Operation Manual
XXII ViewInfo
This is to inquire the storage information of the fingerprint/card machine. It includes storage
Detail, record detail, system Detail. Storage Info is to view the enrolled information.
Use up or down arrow to move the highlight bar into different items for pinpointing.
Ini adalah untuk menanyakan informasi penyimpanan mesin sidik jari / kartu. Ini termasuk "storage
Detail", "catatan rinci", "sistem Detail". Info penyimpanan adalah untuk melihat informasi
terdaftar. Gunakan atas atau bawah panah untuk memindahkan puncak bar menjadi item yang berbeda
untuk menunjukkan dengan tepat.
Storage Detail
1. User Reg
0
2. Manager Reg
0
3. Finger
0
Esc-ESC
Set-OK
4. Password
0
5. ID Card
0
User can either use the up or down arrow to move the current menu item or use numeric key
to go into exactly the menu item for inquiry of in out record or management record.
Pengguna bisa menggunakan "up" atau "down" panah untuk memindahkan item menu saat ini atau
gunakan tombol numerik untuk pergi ke persis item menu untuk penyelidikan dari dalam catatan
keluar atau merekam manajemen.
Operation Manual
User Confirm
2. After user do the verification, the user in out records in the current month will be
displayed.
2. Setelah pengguna melakukan verifikasi, pengguna di luar catatan dalam bulan berjalan akan
ditampilkan.
00001
2013-05 1/1
12 10
08 23 16 30
09 10
In the above screen, you can see that user id (00001) has in out records in 3 days. In 01
May 2013, it has 1 in record. In 02 May 2013, it has 2 in out records. In 03 May 2013, it
again has 1 in record. In the upper right corner, you can see 1/1. It means the current page
is 1 while the total pages is also 1.
Use to change the current page.
*** The End ***
Pada layar di atas, Anda dapat melihat bahwa user id (00001) telah di luar catatan dalam 3
hari. Pada 1 Mei 2013, ia memiliki 1 dalam catatan. Pada 2 Mei 2013, ia memiliki 2 di catatan
keluar. Pada 3 Mei 2013, lagi memiliki 1 dalam catatan. Di sudut kanan atas, Anda dapat melihat
1/1. Ini berarti halaman saat ini adalah 1 sedangkan total halaman juga 1.
Gunakan "", "" untuk mengubah halaman saat ini.
32