Professional Documents
Culture Documents
Below, we have compiled some of the case study turbines that will
be presented at this years international IQPC Giant Offshore Wind
Turbines conference. Read on to find out more about current
offshore turbine projects!
Senvion 6.2M152
The Senvion Senvion 6.2M152 takes offshore
wind turbines to the next generation. With a
larger turbine and a higher yield, the 6.2M152
is their most economical turbine yet!
Being an upgrade for the 6.2M126, the turbine
has been granted a new gearbox. The updated
gearbox, rotor and machine carrier have been
so efficiently optimized that the offshore turbine
now delivers up to 20 per cent more yield at a
wind speed of 9.5 m/s.
The package is rounded by an impressive rotor
diameter of 152 meters.
Source: www.senvion.com
Design data
Certification
Nominal power
6,150 kW (MV-side)
Cut-in wind speed
3,5 m/s
Nominal wind speed
12 m/s 11,5 m/s
Cut-out wind speed
25 m/s 30 m/s
Restart cut-in wind speed
20 m/s 25 m/s
Operating temperature range -20 +35 C
Gear system
Type
Three-stage planetary / spur gearbox
Gear ratio
i = approx. 116
Type of suspension Four-point contact suspension
Rotor
Diameter
152 m
Rotor area
18,146 m
Rotor speed 6,4 10,1 1/min (+15 %)
Power control Electrical pitch
www.giant-offshore-turbines.com
Source: www.rechargenews.com
Specification
Rated power
Rotor diameter
Hub height
No. of blades
Rotor location
Yaw control
Generator
Cut-In wind speed
Cut-out wind speed
Wind velocity class
HTW5.0-126
5MW (5,000kW)
126m
90m (approx.)
3
Downwind
Normal operation: Active control
Stand-by-mode inhigh winds: Free yaw
Permanent magnet synchronous generator
4 m/s
25 m/s
IEC-Class S (yearly meanwind speed:
10m/s)
www.giant-offshore-turbines.com
Rated Power
Turbine Model
Number of Turbines
Hub height
Rotor diameter
Hub Height
Blade length
Generator
Cut-In wind speed
Cut-out wind speed
Source: www.alstom.com
www.giant-offshore-turbines.com
6 MW
Haliade 150-6MW (Alstom
Power
1
90m (approx.)
150 m
100 m
73.5 m
Permanent magnet
synchronous generator
3 m/s
25 m/s
When China Ming Yang Wind Power Group announced that its
super compact drive ("SCD") offshore wind turbine prototype of
6.5MW platform was ready, it truly was a day for celebration.
The state of the art giant turbine is able to be expanded and
developed to a series of wind turbine generators ("WTGs") with
capacity ranging from 5.0MW to 7.0 MW. This cutting-edge SCD
wind turbine prototype features a two-blade design with a light
weight permanent magnet generator and is able to adapt to
various extreme offshore weather conditions, offering high
reliability at a lower weight to offshore wind farm operators,
particularly in typhoon-prone regions.
Mingyang 3 MW SCD
Rated Power
Turbine Model
Number of Turbines
Hub height
Rotor diameter
Blade length
Blades
Generator
Cut-In wind speed
Cut-out wind speed
6 MW
Mingyang 3 MW SCD
1
90m (approx.)
140 m
48 m
2
Permanent magnet synchronous
generator
3 m/s
22 m/s
www.giant-offshore-turbines.com
At this years international IQPC Giant Offshore Wind Turbines conference, you will have the chance to
meet industry experts from Hitachi, Senvion, Alstom, Mingyang, RWE Innogy, Vattenfall Europe,
DNV GL and many others to exchange expertise and opinions on first hand experience, technical
challenges and design properties for multi MW turbines and projects! Discuss these topics in person,
enlarge your network, and find out how to optimise multi MW turbine performance. Join industry experts
and discuss:
www.giant-offshore-turbines.com