Pls find my email regarding colilert for water bacti.
regards, Albert -Dear Eng'r De Dios, Please find below the prices for the quantification of coliform and E coli using Idexx reagents. 1. Colilert 18 ( WP200I-18 , pack of 200) Snap pack for 100 ml samples which provides coliform and E coli result in just 18 hours. Samples turn yellow when coliforms are present and fluoresce to indicate the presence of E coli. Both presence/absence testing or quantification using quantitray method. @ Php 69,800.00/pack of 200 2. 120 ml shrink-banded vessels ( WV120SBST-200) The shrink banded vessel which contains sodium thiosulfate use to collect water samples for the testing @Php 16,800.00/pack of 200 3. Quanti-Tray ( WQT100) Are used to quantify results using colilert 18. Quanti-Tray has 51 wells and provides counts from 1 to 200/100ml. Quanti-Tray eliminates subjective colony interpretation and time consuming confirmation. @Php 49,600.00/pack of 200 4. Quanti-Tray Sealer 2X ( WQTS2X-230) Quanti-Tray automates the sample handling of bacterial enumeration. It seals Quanti-Tray in approximately 15 seconds per tray. @ Php 298,800.00/unit 5. Quanti-Tray Comparator ( WQTC) Easy to use sample comparators indicate the minimum amount of color change or fluorescence to be considered a positive result @Php 2,480.00/bottle 6. UV Lamp (WEA160F) A 6-watt fluorescent, 365 nm long wave UV lamp with bulb for reading of positive result for E coli @ Php 20,440.00/unit 7. UV Viewing Cabinet ( WCM-10) Aluminum cabinet with built-in UV absorbing window. access curtain and holding bracket for the lamps @ 22, 240.00/unit 8. General Incubator ( LIB030M ) Digital incubator with temperature range of 5degree C above ambient to 60 degree C. Temperature stability and uniformity is 0.50 degree C. This incubator is used to incubate the water samples at 35 degree C for 18 hours test. Capacity should be 32 liters at 220 VAC, 60Hz. @ Php 105,000.00/unit Thanks and regards, Albert F Delfin Brownstone aia-Tech Inc