Professional Documents
Culture Documents
ISSN: 2319-1163
Department Driilig Production, Oil Gas University in Ploiesti, Romania, 2Department, Mechanical Engineering, Oil Gas
University in Ploiesti, Romania, 3Maria Rapadopoulos, Kavala Institute of Technology, Greece,
lavram@upg-ploiesti.ro, mstan@upg-ploiesti.ro, papa.maria2@hotmail.com
Abstract
Operating status of equipment can be appreciated in mechanical vibration analysis products and their parameters change over time.
The paper presents methods of making a real analysis of oil extraction plant and how to interpret the results.
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
919
ISSN: 2319-1163
Sudden failure
Friction parts;
Axial bearing failure;
The lack of lubricant in the bearings;
Disruption of cooling;
Failure of turbine or compressor blades;
Dynamic instability;
The presence of foreign objects;
Sealing fluid leaks fixed.
Parameter analyzed
Tooth inclination
0o 40o
(0 0,02) mm
1 2,2
(1 12) mm
z 2z
0,092 0,883
-
20 dB
12 dB
6 dB
3 dB
2 dB
3 dB
1 dB
little effect
The large errors of direction of
the tooth
Material stiffness
Tooth flank
Coverage
Modulul
Number of teeth
Specific displacement profile
Tooth width
Curved tooth
Stiffness and mass housing
4. DIAGNOSIS BEARINGS
Bearing, considered separately, the level of vibration and
noise is one of the global indicators of quality, reflecting the
effectiveness of specific technologies and installation finish.
On the other hand, the level of noise vibraiii bearings
mounted in a machine or equipment to an extent significant
influence, along with other performance, product
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
920
ISSN: 2319-1163
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
921
Speedinput
rpm
490
490
490
490
490
490
490
490
L1
L2
L3
L4
L5
L6
LC
M
Vibrations - V
rms m/s
0,121
0,185
0,145
0,162
0,117
0,128
0,107
1,109
Vibrations H
rms m/s
0,074
0,105
0,125
0,124
0,135
1,080
Speed input
L1
L2
L3
L4
L5
L6
rpm
Vibrations - V
Rms in m/s
110
127
204
137
148
182
0,035
0,031
0,033
0,110
0,106
0,080
ISSN: 2319-1163
PUMPS
The pump is a machine which converts mechanical energy
received from a driving source (for example, an electric
motor) hydraulic energy. Transport of the liquid by the pump
can only be achieved in a hydraulic system. Such a system
typically consists of: pipes, fittings, meters and of course the
pump, as the main element.
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
922
ISSN: 2319-1163
Table4. Experimental results from the analysis of vibrations multistage centrifugal pumps
Discharge
Pressure
[kPa]
1
0.8
0.6
0.3
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
923
ISSN: 2319-1163
CONCLUSIONS
Centrifugal pumps are machines that convert mechanical
energy into hydraulic energy by the active part (rotor), with
different structural forms: single-stage, multistage horizontal
or vertical multistage multistage oblique.
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
924
ISSN: 2319-1163
REFERENCES
[1]Giuseppe Aiello, s.a. Real time assessment of handarm
vibration system based on capacitive MEMS accelerometers,
Computers and Electronics in Agriculture, Volume 85, July
2012
[2]
Stan
Marius,
Fiabilitateasistemelorsiaplicatii,
EdituraUniversitii Petrol Gaze din Ploieti, ISBN 978-973719-249-3, 2010
[3]Stan Marius, Analysis the significance of reliable
experimentally determined distribution laws, 3 rd Symposium
with international participation Durability and Reliability of
__________________________________________________________________________________________
Volume: 02 Issue: 06 | Jun-2013, Available @ http://www.ijret.org
925