Professional Documents
Culture Documents
Brochure
Page 2
Need additional scalability and quad-node resiliency? The all-flash HPE 3PAR StoreServ
8450 and converged flash 8440 both scale to four nodes and 1843 Terabytes (TB) of raw
flash capacity, with the converged flash array also supporting spinning media for additional
scalability and flexibility.
Looking for massive headroom? The new HPE 3PAR StoreServ Storage 20800 All-Flash Starter
Kit offers the industrys most scalable flash architecture with up to 60 PB of aggregate usable
capacity, 10million IOPS, and 300 Gbps bandwidth in a four-system federation. 5
Brochure
Page 3
To understand how the HPE 3PAR StoreServ architecture is flash-optimized, its critical to first
understand some of the fundamental limitations of the other all-flash array options available
today. These options give you a choice between two general categories. On one hand, you
have all-flash and hybrid systems from major storage vendors that typically leverage legacy
architectures that were never designed for flash, but are now being used to support SSDs. This
is an inefficient and expensive way to deploy flash, and has resulted in a healthy ecosystem of
startups looking to fill the gap with purpose-built, all-flash arrays.
Your other option is an all-flash system that is highly specializedgenerally targeted at either
delivering incredible flash-based performance or lowering the cost of deploying flash. While
some of these niche systems may deliver impressive performance or a low entry price point,
they cannot deliver both ultra-high performance and a low all-flash array cost at the same
timeso you have to trade one for the other.
What is even more troubling is that benefits offered by these niche systems come at the expense
of adding another silo to your data center, meaning you have to sacrifice enterprise-class
resiliency, scalability, federated data mobility, and in some cases advanced data services such as
replication and quality of service (QoS) controls. So while its true that, among these options, you
can surely find an array that fits your specific needs today, they are all inherently limited.
Any architecture that relies on a modular design cannot offer Tier-1 resiliency. Any solution that
is limited in scalability and lacks rich data services cannot give you the most return on your
storage investment. Adding flash to the equation only magnifies these limitations.
Brochure
Page 4
With the HPE 3PAR File Services Suite software license, the entire flash-optimized family
of HPE3PAR StoreServ Storage arrays supports home directory consolidation, group/
departmental shares, and corporate shares in addition to workloads ideally suited for block
protocols. You also get an Object Access API for custom cloud applicationsall using the
same hardware, the same system capacity, and the newly redesigned HPE 3PAR StoreServ
Management Console (SSMC)
HPE 3PAR StoreServ 8200 All-Flash Starter Kit
Looking for a complete all-flash array at the lowest cost? The HPE 3PAR StoreServ 8200
All-Flash Starter Kit gives you an affordable entry point without limiting your ability to grow
or deploy advanced data services. With 11.5 TB of usable capacity to start, you can easily
increase this initial configuration by adding more cMLCs to a maximum usable capacity of
1.3PB. Essential software and three years of 24x7 Proactive Care support are included with
the Starter Kit, as is a free HPE 3PAR Online Import software license for easy migration from
HPEEVA Storage, EMC CLARiiON, VMAX, and VNX arrays, and HDS TagmaStore NSC, USP,
and VSPstorage systemsso everything you need is rolled into one easy package.
An unconditional, 5-year warranty on all HPE 3PAR StoreServ SSDsincluding high-capacity,
high-density 3.84 TB cMLCsprotects your flash media investment. Federated data movement
between all HPE 3PAR StoreServ Storage systems means that your new all-flash array wont
become a stranded island in the middle of your data center and technology refreshes will
forever be painless and simple.
The All-Flash HPE 3PAR StoreServ 8450 Storage Array
When it comes to flash, the HPE 3PAR StoreServ 8450 gives you the best of both worlds. Not
only does a Mesh-Active design remove the bottlenecks that can choke legacy architectures
and limit scalability, but it lowers your cost per usable gigabyte through an impressive lineup of
unique hardware and software efficiencies that extend your flash investments.
Simply put, the 8450 gives you all of the benefits of flash without any limitations, so you can
invest in a storage system that doesnt just meet your immediate needs, but is designed to
handle whatever your future might bring.
Table 1: How the HPE 3PAR StoreServ 8450 stacks up against other all-flash arrays
Flash Appliances
Design focus
Hardware focused
Performance
1,000,000 IOPS
200,000500,000 IOPS
1,000,000 IOPS
Architecture
Dual-controller
Dual-controller
Mesh-Active, Quad-controller
Data services
None
Limited
Complete, enterprise-class
Data mobility
Siloed
Capacity
granularity
Coarse
Granular
Fine-grained
Raw capacity
scalability
60280 TB
70120 TB
1843.2 TB
Usable capacity
scalability
40200 TB
(with RAID5)
250375 TB
5.5 PB
Cost6
Approximately
Approximately
$6$10 USD/GB (usable) $4$8 USD/GB (usable)
Approximately
$1.50 USD/GB (usable)7
Brochure
Page 5
Learn more
Want to learn more about the
flash-optimized HPE 3PAR StoreServ
Architecture? Read the technical white
paper HPE 3PAR StoreServ Storage:
optimized for flash to get all the details.
10
11
Brochure
Page 6
Standard sparing
Over-provisioned flash
Adaptive spares
Spares
X
20% gain
in user
space
User space
User space
High endurance at
high cost/GB
Adaptive spares
available for use
as over-provisioned
capacity only
as needed
High endurance at
lower cost/GB
With high-capacity 3.84 TB cMLC drives, Adaptive Sparing technology employs a modified
strategy that does not augment raw capacity but instead makes read-intensive drives both
read- and write-intensive. The result is greater system capacity and greater SSD endurance.
Controller/Firmware Quality
Enterprise-grade
cMLC
PC-grade
MLC
eMLC
cMLC
10
Brochure
Page 7
As already discussed, the use of Adaptive Sparing allows the HPE 3PAR Architecture to make
more efficient use of cMLC SSDs. This technology, in combination with other flash optimization
technologies presented in this paper, make it possible for the system to use high-density
1.92 TB and 3.84 TB enterprise-grade cMLC SSDs to deliver similar performance and media
endurance as compared to the use of MLC drives, but at a 2030 percent lower cost per
gigabyte. While releasing reserved SSD capacity does have a minimal impact on media
endurance at the drive levelon the order of one drive write per dayAdaptive Sparing
technology actually boosts media endurance at the system level equivalent to approximately
1to 2.5 drive writes per day for a net positive effect.
As a result, Adaptive Sparing allows the system to not only lower the cost of flash through the
use of cMLCs, but to extend system capacity and do this without sacrificing endurance. This
is only possible with a software stack optimized for flash. All currently available HPE 3PAR
StoreServ SSDs carry a five-year warranty offering unconditional replacement due to drive
failure, media wear-out, or both. Hewlett Packard Enterprise is able to offer this guarantee
because of the unique benefits of Adaptive Sparing and the other optimization technologies
built into the system operating system and hardware architecture.
12
Brochure
Unlike bolt-on thin storage solutions available with legacy platforms, HPE 3PAR StoreServ
Storage features hardware-enabled data compaction technologies that allow systems to run
in a state of consistently high capacity utilization without performance tradeoffs. In fact, the
HPE Get Thin Guarantee promises new HPE 3PAR StoreServ customers at least 50 percent
reduction in capacity requirements by simply replacing legacy storage with HPE 3PAR
StoreServ Storageguaranteed.13
Whether you choose the all-flash 8450, the converged flash 8440, the 8200 All-Flash Starter kit,
or one of the new enterprise flash models, the HPE 3PAR StoreServ Storage platform delivers
unique flash efficiencies that give you more from your investment. This lets you get the most out
of every dollar and I/O for lower TCO and increased storage ROI, backed by a 5-year SSD warranty.
If your organization is seeking to increase the productivity of employees while improving
protection and security of user-generated file data, Hewlett Packard Enterprise now offers
you a truly converged primary storage platform that effectively addresses an expanded set of
workloads. The HPE3PAR StoreServ File Persona Suite is your key to unlocking this capability
within any HPE3PAR StoreServ Storage system.
Combine this with the fact that the HPE 3PAR StoreServ Storage family uses the same OS
and offers the same rich set of enterprise-class data services across the entire portfoliofrom
midrange to high-end and across flash and spinning mediaand the choice becomes simple.
Investing in HPE 3PAR StoreServ Storage is investing in your future by choosing the last
primary storage platform youll ever need.
Learn more at
hpe.com/storage/3par
13
Copyright 20142015 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice.
The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not
be liable for technical or editorial errors or omissions contained herein.
Microsoft is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. VMware is a
registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions.
4AA5-2914ENW, November 2015, Rev. 5