Professional Documents
Culture Documents
Homes
and Gardens.
LOT No.:
DATE OF PURCHASE:
If you have any questions regarding assembly or if you are missing parts, do not return
this item to the Retailer Store. Please call our toll-free customer service number and
have your instructions and parts list ready to provide the model name, part name or
factory number:
1-866-942-5362
8:30 a.m. - 4:30 p.m. PST, Monday - Friday
Or visit our website 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to parts@,whalenfurniture.com
Stock # BH10-084-001-16
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we
will repair or replace it for up to 1 year from date of purchase. Every Whalen Furniture
product is designed to meet your highest expectations. We guarantee that you will
immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m. PST Monday to Friday
/TMAXIMUMLOAD
This unit is intended for use only with the maximum weights
indicated. Use with products heavier than the maximum weights indicated may result
in instability causing possible injury.
Page 2
Stock # BH10-084-001-16
Please read completely through the instructions and verify that all parts listed are present
before beginning assembly.
B- Leg (4)
Page 3
Stock # BH10-084-001-16
Assembly Instructions
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and c o n f m that you have all the hardware and required parts listed.
2. Place Bench Top (A) upside down on a smooth & protective surface as shown in the below diagram.
3. Attach 4 Legs (B) to the apron comers of Bench Top (A) by inserting the Hanger Bolts pre-attached on
Leg through the pre-drilled holes on corner block, fit Flat Washer (3), Lock Washer (2) and Nut (1)
onto each Hanger Bolt, then securely tighten the nuts with Open Wrench provided. See the below
diagram.
4. Stand the unit upright.
Description:
Sketch
6?3
Q ~ YTools rewired:
(8~~s)
Open Wrench
cl
(8~~s)
a.
(8~~s)
Page 4
Better
H O
~ ~ S
and Gardens.
Page 5
*BH10-084-001-16-1-BT
*BH10-084-00I-16-2-L
*BH10-084-001-16-3-CH
*BH10-084-001-16-4-N
*BH10-084-001-16-5-LW
*BH10-084-001-16-6-FW
*BH10-084-001-16-7-OW
Bench Top
Leg
Complete Hardware
Nut
Lock Washer
Flat Washer
Open Wrench