Professional Documents
Culture Documents
1998
2000
About us
AIRMEEX was founded in 1995 in Valenton by Mr Caliskan, Mr
Erol and Mr Biancotto. They had developped innovating concepts on
engines depollution and material protection on hazardous area.
Since then, the owners use creative ideas and market trends for
producing new products and solutions for our customers.
All new products meet high quality standards with current tech-
The company is a real success, gets bigger and had to move out
every year until 2003 when AIRMEEX builds its new plant in Vigneux
sur Seine.
Airmeex is one of the leading companies in producing exhaust
gas reduction systems and hazardous area material protection.
nologies.
We are a dynamic and strong team and our business drivers
brought us up to the top in the last years. For satisfying our customers requirements and for delivering high quality, we have
expanded our locations.
ATEX - IP
Protection
ELECTRIC ZONE 22
system SAFEX 3D category 3D
ELECTRIC ZONE 21
system SAFEX 2D category 2D
DIESEL ZONE 2 IIB T3 - T4
DIESEX system category 3G
DIESEL ZONE 1 IIB T3-T4
system MOBILEX category 2G
DIESEL ZONE 22
system DUSTEX 3D category 3D
DIESEL ZONE 21
system DUSTEX 2D category 2D
IP44 - 55 - 65 - PROTECTION
PROOFEX System
HAZARDOUS AREAS
DEFINITIONS
EXPLOSIVE ATMOSPHERE
It is a mixture, in air, of flammable vapour, fog or dust which,
after the explosion, is propaged to the unburnt explosive mixture.
MAIN REQUIREMENTS
OF ATEX DIRECTIVE
An explosive atmosphere may be present either as during normal operation or the result of an incident such
- Mechanical failure (pump, valve, sensor, etc..)
- Electrical failure
(short circuit, lightning, ambient temperature increasing)
- Electrostatic discharge
PARAMETERS
CONDITIONS
Ignition temperature
L.I.E.
This is the lower limit of explosivity.
This the miminum concentration level of a dangerous liquid
that should ignitated in air
L.S.E.
This is the higher limit of explosivity.
This the maximal concentration (Vapour, gas, dust) under that
the mixture could ignitated
FLASH POINT
This the lowest temperature at which a dangerous liquid
generates enough vapour to ignitated.
20
21
22
Gas
Dust
Gas
Dust
Gas
Dust
Explosive
Atmosphere
Permanent presence
Intermittent presence
Manufacture of Products
Industry Activity
ATEX Directive
category 94/9/CE
Tanks or reactors
1G
1D
2D
For Diesel
Applied standards
DIESEL FORKLIFT
No protection possible
for forklift
Only EEx ia
for electronic devices
Applied standards
ELECTRIC FORKLIFT
No protection possible
for forklift
Only EEx ia
for electronic devices
AIRMEEX system
3D
For Diesel
ZONE 1 IIB
T3 or T4
comply En 1834-1
AIRMEEX system
Occasional presence
for Diesel
ZONE 21
comply EN1834-3
ZONE 2 IIB
T3 or T4
comply En 1834-1
For Diesel
ZONE 22
comply En 1834-3
EEx d IIB T4
EN 50014-EN 50018
EN 50019-EN 50020
MOBILEX
DUSTEX 2D
DIESEX 3G
DUSTEX 3D
ZONE 2 IIB
For electric part
IP 6x - EN60529
directive 94/9/EC
EN 50054
EN 50057
EN 50021
IP5X-EN 60529
directive 94/9/EC
EUROPEX
SAFEX
SAFEX
SAFEX 3D
EEx d IIB T4
EN 50014-EN 50018
EN 50019-EN 50020
Class T Cenelec
T6
T5
T4
T3
T2
T1
Maxi surface T
85C
100C
135C
200C
300C
450 C
IIA Propane
IIB Ethylen
IIC Hydrogen
ELECTRIC
ZONE 2 IIB T3-T4
SAFEX System
category 3G comply with
ATEX directive
94/9/EC
Head light
EEx d IIB T4
Flashing beacon
EEx d IIB T4
Tail lights
EEx d IIB T4
Reverse bleeper
EEx nC
Drive motor
Pump motor
EEx nR
Antistatic wheels
Control unit-contactor
box
EEx n R
9- Manual horn.
10- Instructions manual.
ELECTRIC
ZONE 1 IIB T3-T4
EUROPEX System
category 2G comply with
ATEX directive 94/9/EC
Tail lights
EEx d IIB T4
Flashing beacon
EEx d IIB T4
Reverse bleeper
EEx i IIB T4
Head lights
EEx d IIB T4
Antistatic
seat
Drive motor
EEx d IIB T4
Antistatic wheels
Airmeex is notified by INERIS to design and manufacture products for explosive atmospheres guaranted to the last standards.
The Protection System EUROPEX TM adapts on any type of materials of electric handling and fullfills the requirements of ATEX
EC/94/9 directive for the equipment of group II category 2G for Zone 1.
TM
Europex is the ideal solution for a maximum flame - proof protection for the needs for industries at the risks while qualities of the
materials of origin and them specifies.
CE confirmity is made out either by the constuction of the original
equipment or by Airmeex in accordance with ATEX directives.
All plastic parts like wheels, seat and others which could generated electrostatic discharge are protected as well. Also mechanical
parts creating sparks or over heating are into account in the protection system such as brakes, forks and hydraulic parts.
7- Manual horn
8- Plastic parts and seat with antistatic treatment
9- Stainless steel cladded forks
ELECTRIC TRANSPALET
ZONE 1 IIB T3-T4
EUROPEX System
category 2G comply with
ATEX directive
94/9/EC
Battery Connector
EEx d IIB T4
Pump motor
EEx d IIB T4
ATEX Battery
EEx e II T6
Drive motor
EEx d IIB T4
Airmeex is notified by INERIS to design and manufacture products for explosive atmospheres guaranted to the last standards.
The Protection System EUROPEX TM adapts on any type of materials of electric handling and fullfills the requirements of ATEX
EC/94/9 directive for the equipment of group II category 2G for Zone 1.
Europex TM is the ideal solution for a maximum flame - proof protection for the needs for industries at the risks while qualities of the
materials of origin and them specifies.
CE confirmity is made out either by the constuction of the original
equipment or by Airmeex in accordance with ATEX directives.
7- Manual horn
2- SAFETY
2 - SAFETY
DIESEL
ZONE 2 IIB T4-T3
DIESEX system
category 3G
comply with Directive
ATEX 94/9/CE
Alternator
EEx d IIB T4
Head light
EEx d IIB T4
AIRMEEX patent
Start motor
EEx d IIB T4
Stainless steel
cladded forks
AIRMEEX patent
The Protection System DIESEXTM adapts on any type diesel forklifts and fullfills the requirements of ATEX EC/94/9 directive for the
equipment of group II category 3G for Zone 2.
DIESEX TM is the ideal solution for a maximum flame - proof protection for the needs for industries at the risks while qualities of the
materials of origin and them specifies.
All temperature sensors and safety accessories are fail - safe and
stop the forklift in all circumstances.
All plastics parts like wheels, seat and others which could generated electrostatic discharge are protectes as well. Also mechanical
parts creating sparks or over heating are into account in the protection system such as brakes, forks and hydraulic parts.
2- SECURITY
EEx nC controlled sensors provide an automatic inlet shut
down and fuel shut down simultaneously.
- High exhaust temperature sensor (200C)
- High coolant temperature sensor (99C)
- Low engine oil pressure sensor (0.8 bar)
DIESEL
ZONE 1 IIB T3-T4
MOBILEX system
category 2G
comply with Directive
ATEX 94/9/CE
Work light
EEx d IIB T4
Flashing beacon
EEx d IIB T4
Electric controlbox
EEx d IIB T4
Control switches
EEx nC
Watercooled exhaustmanifold including self
cleaning
AIRMEEX patent
Stainless steel
cladding forks
Alternator
EEx d IIB T4
Start motor
EEx d IIB T4
AIRMEEX patent
Airmeex is notified by INERIS to design and manufacture products for explosive atmospheres guaranted to the last standards.
The Protection System MOBILEXTM adapts on any type diesel
motors and fullfills the requirements of ATEX EC/94/9 directive for
the equipment of group II category 2G for Zone 1.
MOBILEX TM is the ideal solution for a maximum flame - proof
protection for the needs for industries at the risks while qualities of
the materials of origin and them specifies.
CE confirmity is made out either by the constuction of the original equipment or by Airmeex in accordance with ATEX directives.
The diesel engine is protected at the inlet and exhaust manifold by self
cleaning flame arrestor (Airmeex Patent) which does not required regular
maintenance. The exhaust heat exchanger is in double skin watercooled to
avoid hot surface temperature which can ignited the explosive atmosphere.
The electric parts which causes sparkes or such as the motor or contactors are protected according to CENELEC standards to avoid any ignition or
explosion of the dangerous atmosphere.
All temperature sensors and safety accessories are fail - safe and stop
the forklift in all circumstances.
All plastics parts like wheels, seat and others which could generated
electrostatic discharge are protected as well. Also mechanical parts creating
sparks or over heating are into account in the protection system such as
brakes, forks and hydraulic parts.
3- DASHBORD
- Engine coolant temperature thermometer
- Electronic warning light for alternator, oil pressure, overspeed, coolant temperature, exhaust temperature, mini fuel
level, brakes temperature
4- ATEX 2G - CENELEC Electric circuitry
- EEx d IIB T4 electric start motor
- EEx d IIB T4 alternator
- EEx e II T6 battery
- EEx d IIB T4 glow plugs
- EEx d IIB T4 control box including bipolar manual isolator
- EEX i IIB T4 intrinsic safety switches and sensors control
5- Zone 1 category 2G AIRMEEX certificate
6- Instructions manual
7- 1 year warranty or 1200 hours
3- ELECTRIC PROTECTION
3- ELECTRIC PROTECTION
2- SAFETY
4- Zone 21 category 2D AIRMEEX certificate
-
5- Instructions manual
6- 1 year warranty or 1200 hours
MANUAL TRANSPALET
ZONE 1-21
2GD category
comply with
ATEX 94/9/CE
Capacity
2000 kg
3000 kg
Forks width
540 mm
540 mm
Forks lenght
1150 mm
1150 mm
Fork width
160 mm
160 mm
Mini height
85 mm
85 mm
Lift
210 mm
210 mm
Total lenght
1510 mm
1510 mm
Turning radius
95
95
Wheel diameter
180 x 50
190 x 50
80 x 65
80 x 65
Weight
95 kg
100 kg
Certification
Material
INOX 304L
IP44 - 55 - 65 PROTECTION
PROOFEX System comply with EN 60529
Airmeex is specialized to design and produce products for dangerous area or special requirements.
The protection system PROOFEX is adapting to all kind of electrical machine working in hostile environment.
PROOFEX is the ideal solution for a maximal protection of your
devices by keeping all the original characteristics in the same time.
The electrical parts like motors, conatctors, ECU, switches are
protected regarding CENELEC standards to avoid any penetration of
dust or liquid.
Each enclosed motor is also temperature controlled by a sensor
providing a shutdown in case of overheating.
AIRMEEX could realize special protection for cold areas or
against corrosion.
IP55 PROTECTION
-
IP65 PROTECTION
-
DRIVE MOTOR
IP 55 ENCLOSED
PUMP MOTOR
IP 55 ENCLOSED
CONTROL UNIT
IP 55 ENCLOSED
Safety
Accessories
SHUTDOWN VALVE
SPARK ARRESTOR
FLAME ARRESTOR
STANDARD SILENCER
SHUTDOWN VALVE
The use of a diesel engine in hazardous areas such as the OIL
and CHEMICAL INDUSTRIES requires the use of a shutdown valve.
A diesel engine which absorbs hydrocarbon in the atmosphere is
likely to rev up and can only be stopped by a shutdown valve used
as an emergency stop.
Placed between the air filter and the inlet manifold, it closes the
air inlet by the use of a controlled valve.
Different control options are available:
-
MANUAL by a handle
ELECTRIC by an emergency stop button and solenoid
12V or 24V
PNEUMATIC by an emergency stop button and jack
AUTOMATIC by depression (overspeed)
Technical Specifications
Airmeex Code
A 200001
A 200002
A 200003
A 200004
A 200005
A 200006
A 200007
A 200008
A 200009
A 200010
A 200011
A 200012
A 200013
A 200014
A 200015
A 200016
A 200017
A 200018
Type
42
70
52
31
70
20
30
52
80
65
36
80
25
30
62
100
71
46
80
25
30
68
109
78
51
80
25
30
75
130
86
58,5
80
25
30
90
140
106
66
80
25
30
100
150
126
71
80
25
30
122
180
140
86
90
30
30
132
180
150
86
90
30
30
Airmeex Code
A 200023
A 200024
A 200025
A 200026
A 200027
A 200028
A 200029
A 200030
A 200031
Type
ADN 40P
ADN 50P
ADN 60P
ADN 68P
ADN 75P
ADN 90P
ADN 100P
ADN 120P
ADN 130P
42
52
62
68
75
90
100
122
132
70
80
100
109
130
140
150
180
180
52
65
71
78
86
106
126
140
150
31
36
46
51
58,5
66
71
86
86
70
80
80
80
80
80
80
90
90
20
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
SPARK ARRESTOR
A spark arrestor is designed to stop sparks coming from the
DIESEL engine to avoid the propagation of explosion or fire in dangerous areas such as
-
Petrol refinery
Chemical plants
Silos
Pharmaceutical plants
Explosive transport
Airmeex Code
Type
A int. B ext.
Atmospherique
Turbo
10 - 45 cv
0 - 7,5 Kw
10 - 70 cv
7,5 - 51 Kw
10 - 45 cv
7,5 - 33 Kw
25 - 88 cv
18 - 65 Kw
50 - 180 cv
37 - 132 Kw
150 - 265 cv
110 - 195 Kw
350 - 500cv
257- 368 Kw
400 - 700 cv
294,515 Kw
500 - 1000 cv
368 - 736 Kw
10 - 40 cv
7,5 - 30 Kw
25 - 70 cv
7,5 - 30 Kw
110 - 160 cv
81 - 118 Kw
140 - 225 cv
103 - 155 Kw
225 - 400 cv
165 - 2958 Kw
350 - 600 cv
1257 - 440 Kw
400 - 1000 cv
295 - 736 Kw
A 360001
ASS25
25
50
260
200
30
A 360015
ASS38
45
155
365
265
50
A 360003
ASS51
51
97
470
330
70
A 360005
ASS63
63
155
456
396
70
A 360007
ASS89
89
155
850
690
80
A 360010
ASS114 127
205
980
825
80
A 360012
ASS230 152
230
1165
900
132,5
A 360014
ASS320 190
320
1280
1000
140
A 360013
ASS400 220
400
1500
1500
150
FLAME ARRESTOR
PFG flame arrestor is composed by three layers of filtering
grates.
The entire range is delivered with quick lock brackets and reduction rings to adapt to the diameter of the exaust pipe.
Airmeex Code
PFG Type
Tube diameter
mm
A 300001
PFG38
32 - 38,1
A 300002
PFG43
39 - 43,5
A 300003
PFG48
44 - 48,5
A 300004
PFG53
49 - 53,5
A 300005
PFG58
54 - 58,5
A 300006
PFG50
50
A 300007
PFG55
55
A 300008
PFG60
60
A 300009
PFG65
65
A 300010
PFG70
70
A 300011
PFG75
75
A 300012
PFG80
80
A 300013
PFG85
85
A 300014
PFG90
90
A 300015
PFG95
95
A 300016
PFG100
100
A 300017
PFG105
105
A 300018
PFG110
110
A 300019
PFG115
115
A 300020
PFG125
125
A 300021
PFG135
135
STANDARD
SILENCER
ARMEEX study and manufacture all types of silencer, our
product rage is going to 10 KW up to 3000 KW, with different
kind of materials.
All the studies are realized in our office in our bench test.