You are on page 1of 141

Building Schedule of Rates

For
Urgent Special Repairs, Renovations, Additions and
Improvements, Minor Works and Maintenance to
Government Buildings- 2016

Colombo, Gampaha & Kalutara Districts

B.S.R-2016
Department of Buildings

Chief Engineer Estimates,


Estimate Division,
Dept. of Buildings,
" Sethsiripaya",
Battaramulla.

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

Rs.

Prime =
Department of Buildings, Sethsiripaya, Battaramulla.

Maintenance BSR for 2016


Colombo, Gampaha & Kaluthara Districts
This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

A001
A002
A003
A004
A005
A006
A007
A008
A009
A010
A011
A012
A013
A014
A015
A016
A017
A018
A019
A020

A021

Description

A-DEMOLISHER
Demolishing brickwork in cement stacking brick and clearing debris
away
Demolishing brickwork in lime stacking brick and clearing debris
away
Demolishing cabook masonry in lime mortar stacking cabook and
clearing debris away
Dismantling cadjan roofing or walling stacking timber and clearing
debris
Removing existing Ceiling, stacking materials and clearing debris
Demolishing Cement concrete , and clearing debris in floors (Up to 6"
thick)
Demolishing reinforced cement concrete in suspended floors of 4"
thick, removing reinforcement and clearing debris
Removing and stacking corrugated sheets, iron, asbestos or
Aluminium alloy from roof , or walls
Removing and stacking corrugated sheets, iron asbestos or Aluminium
alloy from roofs or walls of two storied buildings
Removing and stacking Corrugated sheets, iron, asbestos or
Aluminium alloy from roofs or walls of three storeyed buildings
Removing and stacking Door or Window, size up to 40 Sq.ft: from
existing walls
Removing and stacking Door or Window, size over 40 sq.ft from
existing walls
Removing and stacking Door or Window, sash only up to 40 Sq.ft:
from existing walls
Removing and stacking Door or Window, sash only over 40 sq.ft:
from existing walls
Removing and stacking Down pipes, 4" to 6" dia: G.I. old or decayed,
from existing building
Demolishing drains and clearing debris
Removing and stacking Expanded Metal from existing frames
Uprooting fence , rolling up and stacking barbed wire and all other
materials . (Length of fencing to be measured)
Demolishing floors brick paved, and clearing debris away
Removing and stacking gate sash after demolishing cement concrete
blocks or removing posts and separating pintols (Demolishing
brickwork where necessary paid for separately).
Removing and stacking Glass panes in doors and windows and
fanlights

This BSR is for Maintenance works only

S07- 26

Item
Unit

BSR Rate
2016

Cube

1,444

Cube

1,925

Cube

1,683

Sqr
Sqr

187
590

Cube

8,573

Sqr

6,192

Sqr

667

Sqr

725

Sqr

790

Nos

858

Nos

1,191

Nos

135

Nos

203

L.ft
L.ft
sq.ft

10
19
18

L.ft
Sqr

46
715

Nos

953

sq.ft

38

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

A022 Removing and stacking Gutter, eaves, from roofs of single storeyed
L.ft
buildings
A023 Removing and stacking gutter, eaves, from roofs of 2 storeyed
L.ft
buildings
A024 Removing and stacking gutter, eaves, from roofs of three storeyed
L.ft
buildings
A025 Removing and stacking partitions at site including making good to
sq.ft
walls and floors
Chipping lime plastering
Sqr
A026 Chipping lime plastering and clearing debris away
A027 Chipping rendering, cement, and clearing debris away from brick
Sqr
walls and floors
A028 Chipping rendering, cement, and clearing debris away from cement
Sqr
concrete floors and walls
Roof removing
A029 Roof removing tiles and timber, stacking serviceable materials and
Sqr
clearing debris in single storeyed buildings
A030 Roof removing tiles and timber, stacking serviceable materials and
Sqr
clearing debris in two storeyed buildings
A031 Roof removing tiles and timber, stacking serviceable materials and
Sqr
clearing debris in three storeyed buildings
Demolishing rubble
A032 Demolishing rubble masonry in cement, stacking rubble and clearing
Cube
debris
A033 Demolishing rubble masonry in lime, stacking rubble and clearing
Cube
debris
Sqr
A034 Demolishing tiles, glazed and clearing debris
Removing and stacking tiles
A035 Removing and stacking tiles Calicut or half round, from roof of single
Sqr
storeyed buildings
A036 Removing and stacking tiles Calicut or half round, from roof of 2
Sqr
storeyed buildings
A037 Removing and stacking tiles Calicut or half round, from roofs of three
Sqr
storeyed buildings
Removing water proof, asbestos ceiling & Valance or Barge
boards.
A038 Removing waterproof Treatment or hot bitumen from flat roof and
Sqr
clearing debris away
A039 Removing ceiling asbestos including timber framework, stacking
serviceable materials and clearing debris away in single storeyed
Sqr
buildings
A040 Removing ceiling asbestos including timber framework, stacking
serviceable materials and clearing debris away in two storeyed
Sqr
buildings

This BSR is for Maintenance works only

S07- 27

BSR Rate
2016

7
11
15
34
358
1,072
1,608

1,331
1,750
2,226

2,648
1,925
1,905

477
722
963

1,905

2,182

2,662

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

A041 Removing and stacking Valance, Barge board materials and clearing
L.ft
debris away in single storeyed building
A042 Removing and stacking Valance, Barge board materials and clearing
L.ft
debris away in two storeyed building
Chipping cement plaster
Sqr
A043 Chipping cement plaster, soffit and clearing debris away
Transporting debris
A044 Transporting debris cleared away from site by tractor (app10 miles
Load
away). Rate to include loading & unloading.
A045 Transporting debris cleared away from site by 3.5 cube capacity heavy
Load
vehicle and loading with JCB machine ( app. 10 miles away )
Preparatory work
A046 Clearing site vegetation including removal of bushes, shrub under
growth hedges and tree stumps up to 12" girth measured at height up
to 3' 0" above ground level ,removing rubbish up to a distance of 150
Sqr
ft beyond the outer walls of the proposed building.
Felling Trees
A047 Removing trees and stumps size of girth varies from 1' 0" and up to 2'
0" and girths are measured at 3' 0" height above ground level including
cutting of trunks and branches, grubbing up roots, staking of
serviceable materials and disposal of unserviceable materials.( aveg. 6"
Nos
dia. and aveg. ht 10')
Removing
trees
and
stumps
size
of
girth
varies
beyond
2'
0""
and
up
A048
to 4' 0" and girths are measured at 3' 0" height above ground level
including cutting of trunks and branches, grubbing up roots, staking of
serviceable materials and disposal of unserviceable materials. ( aveg.
Nos
12" dia. and aveg. ht 16' 6")
A049 Removing trees and stumps size of girth varies beyond 4' 0" and up to
8' 0 " and girths are measured at 3' 0" height above ground level
including cutting of trunks and branches, grubbing up roots, staking of
serviceable materials and disposal of unserviceable materials. ( aveg. 2'
Nos
0"dia. and aveg. ht 23' 0")
A050 Removing trees and stumps size of girth varies beyond 8' 0 " and
girths are measured at 3' 0" height above ground level including
cutting of trunks and branches, grubbing up roots, staking of
serviceable materials and disposal of unserviceable materials. ( aveg. 3'
Nos
4" dia. and aveg. ht 33' 0")
Removing Top Soil
A051 Removing top soil to a depth not exceeding 6" & depositing as
Sqr
directed within site

This BSR is for Maintenance works only

S07- 28

BSR Rate
2016

7
10
1,352

3,406
Deleted

142

491

2,159

14,764

24,575

958

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

B001

B002

B003

B004

B005

B006

B007

B008
B009
B010
B011
B012

B013
B014

B015

B016

Description

B-EXCAVATOR
Excavation over site to reduce level in any material except rock
requiring blasting including depositing and levelling as directed up to a
distance not exceeding 30ft
Excavation in trenches for walls/column pits in soft/loose soil from, 0
to 5ft deep and depositing excavated material to a distance not
exceeding 30ft . (earth work support to be paid separately).
Excavation in trenches for walls/column pits in ordinary soil from, 0 to
5ft deep and depositing excavated material to a distance not exceeding
30ft . (earth work support to be paid separately).
Excavation in trenches for walls/column pits in hard dense soil from 0
to 5ft deep and depositing excavated material to a distance not
exceeding 30ft . (earth work support to be paid separately).
Excavation in trenches for walls/column pits in mud/wet soil from 0 to
5ft deep and depositing excavated material to a distance not exceeding
30ft . (earth work support to be paid separately).
Excavation in trenches for walls/column pits in soft disintegrated rock
(not requiring blasting) up to a depth of 5ft and depositing excavated
material to a distance not exceeding 30ft . (earth work support to be
paid separately).
Excavation in trenches for walls/column pits in hard rock requiring
blasting up to a depth of 5ft and depositing excavated material to a
distance not exceeding 30ft . (earth work support to be paid
separately).
Benching rock in foundation in 3"-6" steps.(Blasting not allowed)
- Deleted Backfilling & compacting pits and trenches with available earth .
Backfilling & compacting pits and trenches with imported earth.
Cutting turf sods loading to hand carts and transporting up to 30 yards
laying and watering for 30 days .(Royalty for turf pegging and
transport beyond 30 yards paid separately)
Drains, earth, in any soil except rock requiring blasting cut to gradient
and shape as directed and depositing soil within site
Excavation for foundation in any material except rock requiring
blasting, part return fill in and ram, and disposing surplus within site
as directed.(not exceeding 5ft depth)
Excavation & levelling site in any material except rock requiring
blasting, including depositing and levelling.
Note:-For excavation beyond the depth of 5' 0" an additional
unskilled labourer should be added for every additional depth of 5'
0" or part thereof for each cube of excavation beyond the original 5'
0" depth.
Filling Under floors & foundations
Filling under floors with gravel or other approved quality of filling,
spread, water and well rammed in 3" layers with available earth

This BSR is for Maintenance works only

S07- 29

Item
Unit

BSR Rate
2016

Cube

1,548

Cube

953

Cube

2,144

Cube

3,334

Cube

2,858

Cube

2,382

Cube
sq.ft
Sqr
Cube
Cube

3,428
274
Deleted
953
4,933

Sqr

Deleted

Cube

1,363

Cube

1,601

Cube

1,112

Cube

1,720

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

B017 Filling under floors with gravel or other approved quality of filling,
Cube
spread, watered and well rammed in 3" layers with imported earth.
B018 Sand filling in Column footing, under wall foundations, watered and
Cube
well rammed.
Earth work supports
B019 Earthwork support (open planking) in trenches up to a depth of 5ft 0"
sq.ft
(2" thick class 2 Timber )
B020 Earthwork support (close planking) in trenches up to 5ft 0" depth (2"
sq.ft
thick class 2 Timber )
B021 Earthwork support (Close planking ) in deep excavation in trenches up
to 15ft 0" depth. Consider trench of 15ft 0" width 5ft 0" at top and 3ft
6" at bottom. (2" thick class 2 Timber )(area supported 2/15ft x 15ft)
sq.ft
450 sq.ft

This BSR is for Maintenance works only

S07- 30

BSR Rate
2016

5,938
16,754

109
194

219

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

C001
C002
C003
C004
C005
C006

C007

C008

C009
C010
C011
C012
C013

C014

C015

Description

C-CONCRETER
Concreting Mass (Gr.15 Mix)
Mixing and Placing of cement concrete 1:3:6 with 1" metal, hand
mixing up to 1 cube, in ground floor. (Shuttering paid for separately)
Mixing and Placing of cement concrete 1:3:6 (1") using mixer,
above one cube, in ground floor. (Shuttering paid for separately)
Mixing and Placing of concrete 1:3:6 with 2" metal, using mixer,
above one cube, in ground floor. (Shuttering paid for separately)
Mixing and Placing of cement concrete 1:3:6 (2"), hand mixing up to
one cube, in ground floor.(Shuttering paid for separately)
Mixing and Placing of cement concrete 1:2 :5 (1") using mixer,
above one cube, in ground floor.(Shuttering paid for separately)
Mixing and Placing of cement concrete 1:2 :5 (1"), hand mixing up
to one cube, in ground floor. (Shuttering paid for separately)
Concreting Drains (Gr.15 Mix)
Drains semi-circular in cement concrete 1:3:6(1"), 9" wide and 9"
average depth, 3" thick sides and base, inclusive of 1/2" cement
rendering 1:3 with necessary expansion joints and
excavation(shuttering paid separately), but without ramp.
Drains semi-circular in cement concrete 1:3:6(1") 9" wide and 9"
average depth, 3" thick sides and base, inclusive of 1/2" cement
rendering 1:3 with necessary expansion joints and
excavation(shuttering paid separately),but with 1ft 6" wide ramp .
Concrete (Grade 20 Mix)
Cement concrete 1:2:4(3/4") using mixer, above one cube. (R/F and
Shuttering paid for separately)
Cement concrete 1:2:4(3/4")using mixer, up to one cube. (R/F and
Shuttering paid for separately)
Channels 2" semi-circular, forming in cement concrete floors and 1/2"
cement rendering 1:2 (Extra over concrete floors)
Channels 4" semi-circular, forming in cement concrete floors and 1/2"
cement rendering 1:2 (Extra over concrete floors)
Supplying & laying corbel stone in cement concrete1:2:4(3/4")
reinforced with 4 Nos: 3/8" rods ( shuttering paid separately)
Curbs
Supplying and laying curb in cement concrete 1:2:4 (3/4") 9" high 3"
wide and cement rendered 1/2" thick 1:2.(shuttering excavation paid
separately)
Concreting Drains, semi-circular
Supplying and laying Drains, semi-circular, in cement concrete
1:3:6(1") 9" wide and 9" average depth, with 3" thick sides and base
inclusive of 1/2" cement rendering 1:3 expansion joints as necessary,
including necessary excavation (Shuttering paid separately)

This BSR is for Maintenance works only

S07- 31

Item
Unit

BSR Rate
2016

Cube

38,288

Cube

32,672

Cube

33,407

Cube

37,307

Cube

36,986

Cube

41,756

L.ft

606

L.ft

1,121

Cube

44,032

Cube

44,334

L.ft

82

L.ft

126

Nos

678

L.ft

349

L.ft

557

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

C016
C017
C018
C019
C020
C021
C022
C023
C024

C025
C026
C027

C028

C029

C030

C031

C032
C033

Description

Concreting Lintols (Gr. 20 Mix)


Lintol, cement concrete 1:2:4(3/4") 4 1/2" x 6" (Reinforcement paid
for separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 9" x 6" (Reinforcement paid for
separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 9" x 9" (Reinforcement paid for
separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 12" x 9" (Reinforcement paid for
separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 13 1/2" x 6" (Reinforcement paid
for separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 13 1/2" x 9" (Reinforcement paid
for separately). Rate inclusive of shuttering
Lintol, cement concrete 1:2:4(3/4") 13 1/2" x 12" (Reinforcement
paid for separately). Rate inclusive of shuttering
Pad stones in cement concrete 1:2:4(3/4" Metal) precast or in situ.
Slabs over drains
Slabs over drains ,cement concrete 3" thick 1:2 :4 (3/4) and 1/2"
cement rendering 1:2 .(Reinforcement paid for separately ) Rate
inclusive of shuttering
Spur stones 8" x 8" x 6" in cement concrete 1:2:4(3/4") for veranda
posts supplying and fixing(shuttering paid for separately)
Spur stones 4" x 3" x 2" in cement concrete 1:2:4(3/4") for door posts
supplying and fixing(shuttering paid for separately)
Squatting plate for latrines , cement concrete 1:2:4( 3/4'') as per type
plan.
Concreting of Beams and Columns (Gr. 20 Concrete)
Cement concrete 1:2:4(3/4") in column shafts in ground floor, using
mixer and vibrator. (Reinforcement, shuttering and finishes paid for
separately)
Cement concrete 1:2:4(3/4") in column shafts in first floor, using
mixer and vibrator. (Reinforcement, shuttering and finishes paid for
separately).
Cement concrete 1:2:4(3/4") in column shafts in second floor, using
mixer and vibrator. (Reinforcement, shuttering and finishes paid for
separately).
Cement concrete 1:2:4(3/4") in beams in ground floor, using mixer
and vibrator. (Reinforcement, shuttering and finishes paid for
separately)
Cement concrete 1:2:4(3/4") in beams in first floor, using mixer and
vibrator. (Reinforcement, shuttering and finishes paid for separately)
Cement concrete 1:2:4(3/4") in beams in second floor, using mixer and
vibrator. (Reinforcement, shuttering and finishes paid for separately)

This BSR is for Maintenance works only

S07- 32

Item
Unit

BSR Rate
2016

L.ft

239

L.ft

307

L.ft

396

L.ft

483

L.ft

406

L.ft

546

L.ft
Nos

657
614

sq.ft

205

Nos

237

Nos

195

Nos

1,872

Cube

45,492

Cube

47,397

Cube

48,350

Cube

44,609

Cube

46,514

Cube

47,466

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

C034
C035

C036
C037

C038

C039

C040

C041

C042

C043
C044
C045
C046

C047

C048

C049

C050

Description

Concreting Slabs (Gr. 20 Mix)


4" thick R.C.C 1:2:4(3/4") in 1st: floor slab using mixer and vibrator.
(Reinforcement and shuttering paid for separately)
5" thick R.C.C. in 1st: floor slab using mixer and vibrator.
(Reinforcement and shuttering paid for separately)
Concreting Structural Elements (Gr. 25 Mix)
Cement concrete 1:1:3(3/4") in ground floor, using mixer and
vibrator.
Cement concrete 1:1:3(3/4") in column shafts in ground floor,
using mixer and vibrator. (Reinforcement, shuttering and finishes paid
for separately)
Cement concrete 1:1:3(3/4") in column shafts in first floor, using
mixer and vibrator. (Reinforcement, shuttering and finishes paid for
separately).
Cement concrete 1:1:3(3/4") in column shafts in second floor,
using mixer and vibrator. (Reinforcement, shuttering and finishes paid
for separately).
Cement concrete 1:1:3(3/4") in beams in ground floor, using
mixer and vibrator. (Reinforcement, shuttering and finishes paid for
separately)
Cement concrete 1:1:3(3/4") in beams in first floor, using mixer
and vibrator. (Reinforcement, shuttering and finishes paid for
separately)
Cement concrete 1:1:3(3/4") in beams in second floor, using mixer
and vibrator. (Reinforcement, shuttering and finishes paid for
separately)
Ready mixed Concrete
Supplying and laying redy mixed concrete grade 20.
Supplying and laying readymixed concrete grade25
Charges for hiring concrete pump Truck for pumping.
Form work (Untreated Non-structural Category A)
Shuttering for floor slab concrete including 4" x 2" (untreated nonstructural category A) timber joists and necessary props. up to 12ft
height. (Rate to include for dismantling same when required).
Shuttering for column shaft 9" x 9" including (untreated non-structural
category A) timber joists and necessary props etc. (Rate to include for
dismantling same when required)
Shuttering for beam sides & soffit in (untreated non-structural
category B) timber, joists and necessary props etc. (Rate to include for
dismantling same when required)
Shuttering for Ground beam sides in Class (II) timber, joists and
necessary props etc. (Rate to include for dismantling same when
required)
Shuttering for footings in Class (II) timber, joists and necessary props
etc. (Rate to include for dismantling same when required)

This BSR is for Maintenance works only

S07- 33

Item
Unit

BSR Rate
2016

Sqr

15,033

Sqr

20,083

Cube

46,610

Cube

47,562

Cube

48,515

Cube

49,467

Cube

48,515

Cube

52,325

Cube

54,230

Cube
Cube
Cube

49,201
50,279
2,286

Sqr

16,076

sq.ft

182

sq.ft

141

sq.ft

124

sq.ft

91

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

C051

C052

C053

C054

C055

Description

Form work (Using Timber planks)


Form work with (untreated non-structural category B) timber planks
for column shafts 9" x 9" including (untreated non-structural
category B) timber joists and necessary props etc. Rate to include for
dismantling same when required.
Form work with (untreated non-structural category B) timber planks
for beam sides soffits including (untreated non-structural category B)
timber props etc. (Rate to include for dismantling same when
required).
Plywood form work (20mm tk.)
Supplying and fixing of 3/4" or (20mm) thick plywood form work for
concrete beams in ground floor, including (untreated non-structural
category B) timber planks , Battens & Joists for beam sides, soffits
etc. (Rate to include for dismantling the same when required).
consider 9"x12" beam to 20ft, long contact area 55sft.
Supplying and fixing 3/4" or (20mm) thick plywood form work in
column in ground floor, including (untreated non-structural category
B) timber joists and necessary props etc. Rate to include for
dismantling same when required. Consider area 15 sq.ft. ( 5ft high
9"x9" col. )
Supplying and fixing 3/4" or (20mm) thick plywood timber formwork
for underside of first floor slab, including 4" x 2" (untreated nonstructural category B) timber joists and necessary props. up to 12ft
height. (Rate to include for dismantling same when required).
consider 20 x 10 area - 200sft.

This BSR is for Maintenance works only

S07- 34

Item
Unit

BSR Rate
2016

sq.ft

127

sq.ft

102

sq.ft

260

sq.ft

200

sq.ft

245

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

D001
D002
D003
D004
D005
D006
D007
D008
D009

D010
D011
D012
D013
D014
D015
D016
D017
D018
D019
D020
D021
D022

D023

Description

D-BRICKLAYER
Arch, Segmental, Brick in cement 1:3 including centering.
Brickwork in (1:5) cement mortar
Brickwork in cement mortar (1:5) above 1 cube, in ground floor.
Brickwork in cement mortar (1:5) up to 1 cube, in ground floor. (up
to first floor level).
Brickwork in cement mortar 1:5 with bricks available at site including
sorting and cleaning bricks.
Brickwork 4 1/2" thick in cement mortar 1:5 above 1 square.
Brickwork 4 1/2" thick in cement mortar 1:5 up to 1 square.
Brickwork 4 1/2" thick in cement mortar 1:5 with available bricks
including sorting and cleaning.
9" thick brick wall cement sand 1:5 in ground floor
Brick work 13 thick in cement sand 1:5 in superstructure in ground
floor
Brickwork Wire cut)
4 thick brick wall (wire cut) in cement sand 1:5 in ground floor
9" thick in cement and sand 1:5 with wire cut brick
13 thick brick wall (wire cut) in cement sand 1:5 in ground floor
Extra over for brickwork ,from first floor level to second floor. ( for
Item Nos. D002 to D005)
Extra over for brickwork ,from second floor level to third floor. ( for
Item Nos. D002 to D005)
Extra over 4 1/2" brickwork ,from first floor level to second floor. (
for Item Nos. D006 to D008)
Extra over 4 1/2" brickwork , ,above second floor level. ( for Item
Nos. D006 to D008)
Coping, brick in cement 1:5, weathering and throating on 4 1/2" walls,
cement rendering 1/2" 1:3 complete.
Coping, brick in cement 1:5, weathering and throating on 9" walls, and
1/2" cement rendering 1:3 complete.
Coping, brick in cement 1:5, weathering and throating on 14" walls,
cement rendering 1/2" 1:3 complete.
Coping, brick in cement 1:5, weathering and throating on 9" walls, and
1/2" cement rendering 1:3 with available brick.
Cornices, brick in cement 1:5 and, cement rendering 1:3 up to 9"
projection and 9" depth.
Door or Window inserting in existing walls including makings,
openings and making good to floors and walls (Lintol or Arch, and
door or window paid for separately).
Drains, brick in cement (1:5) 9" to 12" average depth, 12" wide and
cement rendering 1/2" thick 1:2 finished smooth complete with
expansion joints as necessary including excavation. (Apron paid for
separately).

This BSR is for Maintenance works only

S07- 35

Item
Unit

BSR Rate
2016

Cube

45,430

Cube

38,986

Cube

41,119

Cube
Sqr
Sqr

18,456
14,271
15,276

Sqr
Sqr

7,292
27,838

Sqr

41,696

Sqr
Sqr
Sqr

20,217
38,424
60,476

Cube

1,658

Cube

4,592

Sqr

705

Sqr

1,734

L.ft

275

L.ft

382

L.ft

570

L.ft

289

L.ft

560

sq.ft

176

L.ft

769

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

D024 Drains, brick in cement 1:5, 6"-9" average depth and 9" wide, cement
rendering 1/2", 1:2 finished smooth complete with expansion joints as
necessary including excavation (apron paid for separately).
D025 Drains, scott's pattern, including apron formed of brick masonry in
cement mortar 1:5 and 1/2" cement rendered, finished smooth
complete with expansion joints as necessary including excavation
(apron paid for separately)
D026 Steps, 12" wide and 6" to 9" high masonry or brickwork in cement
mortar 1:3, rendering 1/2" cement 1:2 with foundation 6" below
ground.
D027 Vent opening up to 12" height and 6" width forming on existing walls
and walls made good.
Brickwork in (1:8) cement mortar
D028 Brickwork in cement and sand 1:8 in foundation up to D.P.C.
D029 Brickwork in cement and sand 1:8 in superstructure in ground floor.
(9" thick)
D030 Brickwork in cement and sand 1:8 in 1st: floor. (9" thick)
D031 Brickwork in cement and sand 1:8 in 2nd: floor. (9" thick)

This BSR is for Maintenance works only

S07- 36

Item
Unit

BSR Rate
2016

L.ft

512

L.ft

560

L.ft

399

Nos

348

Cube

37,680

Cube
Cube
Cube

39,826
39,343
41,725

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

E001
E002
E003

E004

E005

E006

E007

E008

E009

E010

Description

E-MASON
Random Rubble
Random Rubble Masonry in cement Mortar 1:5, above 1 cube.
Random Rubble Masonry in cement Mortar 1:5, up to 1 cube.
Random Rubble Masonry in cement mortar 1:5 with available rubble
including sorting out and cleaning rubble.
Cellular (Hollow) block masonry
4" thick Cellular (Hollow) block masonry in cement and sand mortar
1:5 in ground floor cavities unfilled. ( size of each block 16"x8"x4")
(Min com/st 3.0 N/mm2 )
6" thick Cellular (Hollow) block masonry in cement and sand mortar
1:5 in ground floor, cavities unfilled. ( size of each block 16"x8"x6")
(Min com/st 3.0 N/mm2 )
8" thick Cellular (Hollow) block masonry in cement and sand mortar
1:5 in ground floor Cavities unfilled. ( size of each block 16"x8"x8")
(Min com/st 3.0 N/mm2 )10'x10' area
Solid block masonry
4" thick solid block masonry in cement and sand mortar 1:5 in ground
floor. ( size of each block 16"x8"x4") 10'x10' area (Min com/st 3.0
N/mm2 )
6" thick solid block masonry in cement and sand mortar 1:5 in ground
floor.10'x10' area (size of each block 16"x8"x6") (Min com/st 3.0
N/mm2 )
8" thick solid block masonry in cement and sand mortar 1:5 in ground
floor. 10'x10' area ( size of each block 16"x8"x8") (Min com/st 3.0
N/mm2 )
Paste rubble masonry
Supplying & Laying Paste rubble masonry in cement and sand 1:2 in
ground Floor. Granite minimum 40mm thick

This BSR is for Maintenance works only

S07- 37

Item
Unit

BSR Rate
2016

Cube
Cube

31,021
33,355

Cube

25,763

Sqr

13,669

Sqr

18,009

Sqr

24,121

Sqr

16,223

Sqr

23,117

Sqr

30,281

Sqr

67,925

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

F001
F002
F003
F004

F005
F006

F007

F008
F009
F010
F011

F012

Description

F-PAVIOR
Expansion joints in brick floors, filling with bitumen and sand.
Expansion joints in concrete floors filling with bitumen and sand (to
full depth of concrete and rendering)." tk and 4" deep.
Floors, brick paving, 3" thick, set in lime mortar 2:5 and cement
rendering 1/2"thick, 1:3 mixture.
Floors, brick paving 3" thick, set in lime mortar 2:5 and cement
rendering 1/2" thick, 1:3 with available bricks, including sorting out
and cleaning bricks.
Floors, cement concrete 1:2:5(1" metal) 3" thick cement rendering
1/2", 1:3 with expansion joints filling with cement and sand.
Floors, upper, cement concrete 1:2:4(3/4") 4" thick, cement rendering
1/2", 1:3 with lime putty rendering to soffit and expansion joints filling
with cement and sand (Reinforcement paid for separately).
Floors, gravel
Floors, gravel 4" thick, spreading, watering and ramming.
Floor tiles (Laying only)
Fixing tiles on floors with all specials, including raking plaster and
bedding in cement mortar 1:3 pointed with tile grout to match the
tiles. (Tiles supplied by the client or paid separately.
--Do-- for, tiles 8" x 8" in size.
--Do-- for, tiles 12" x 12" in size.
--Do-- for, tiles 16" x 16" in size.
--Do-- for, tiles 24" x 24" in size
Floor tiles; (Gloss/Semi Gloss/Matt) - Vitreous Porcelain
( Homogenous/ Non Homogenous)-Local
Porcelain Homogenous/ Non Homogenous Vitreous, floor tiles with
all specials supplying and fixing to floors including raking plaster and
bedding in cement mortar 1:3 and pointed with tile grout to match the
tiles. ( Rocell or equivalent brand)
--Do-- for, 12"x12" MATT floor tile
Prime Cost of, 12"x12" MATT floor tile (Rocell or Equivalent)=Rs.148

F013 --Do-- for, 12"x12" GLOSS floor tile


Prime Cost of, 12"x12" GLOSS floor tile (Rocell or Equivalent)=Rs.120

F014 --Do-- for, 12"x12" SEMI GLOSS floor tile


Prime Cost of, 12"x12" SEMI GLOSS floor tile (Rocell or Equivalent)=Rs.130

BSR Rate
2016

L.ft

21

L.ft

47

Sqr

17,358

Sqr

12,944

Sqr

15,107

Sqr

Deleted

Sqr

1,486

sq.ft
sq.ft
sq.ft
sq.ft

108
107
102
101

sq.ft

314

120130

sq.ft

Prime Cost of, 16"x16" MATT floor tile (Rocell or Equivalent)=Rs.388

sq.ft

Prime Cost of, 18"x18" MATT floor tile (Rocell or Equivalent)=Rs.411

F017 --Do-- for, 20"x20" GLOSS floor tile


Prime Cost of, 20"x20" GLOSS floor tile (Rocell or Equivalent)=Rs.649
Prime Cost of, 24"x12" MATT floor tile (Rocell or Equivalent)=Rs.600

S07- 38

373

120133

681

120134

sq.ft

619

120135

sq.ft

F018 --Do-- for, 24"x12" MATT floor tile

168

120132

sq.ft

F016 --Do-- for, 18"x18" MATT floor tile

198

120131

sq.ft

F015 --Do-- for, 16"x16" MATT floor tile

This BSR is for Maintenance works only

Item
Unit

120136

404

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

F019 --Do-- for, 24"x12" GLOSS floor tile


Prime Cost of, 24"x12" GLOSS floor tile (Rocell or Equivalent)=Rs.550
Prime Cost of, 24"x16" MATT floor tile (Rocell or Equivalent)=Rs.695

F021 --Do-- for, 24"x24" POLISH floor tile


Prime Cost of, 24"x24" POLISH floor tile (Rocell or Equivalent)=Rs.1352
Prime Cost of, 24"x24" MATT floor tile (Rocell or Equivalent)=Rs.1206
Prime Cost of, 36"x18" MATT floor tile (Rocell or Equivalent)=Rs.1242

Floor tiles- Rustic Type ( Homogenous)-Local


Floor tiles- Rustic Type ( Homogenous), with all specials supplying
and fixing to floors including raking plaster and bedding in cement
mortar 1:3 and pointed with tile grout to match the tiles. ( Rocell or
equivalent brand)
F024 --Do-- for, 12" x 12" in size.
Prime Cost of, Tiles 12"x12" Rustic Type ( Homogenius) ( Rocell )=Rs.197
Prime Cost of, Tiles 16" x 16"Rustic Type ( Homogenius) ( Rocell )=Rs.334

Tile Skirting
F026 Vitreous ceramic floor tiles Skirting 12"x4" supplying and fixing to
bottom line of wall including raking plaster bedding with cement
mortar 1:3 and pointed with tile grout to match the tiles. (Quality
approved by the Engineer.)
Prime Cost of, 12"x12" MATT floor tile (Rocell or Equivalent)=Rs.148

Terrazzo tile flooring


Terrazzo tile flooring supplying and laying.
Terrazzo, wall lining with precast walling slabs 1 1/2" thick
supplying and fixing to complete.
Wall tiles -glazed ( Approved Quality)
Tiles, glazed with all specials, supplying and fixing to walls including
raking plaster and backing in cement mortar 1:3. for available tiles
(Tiles supplied by the client or paid separately.)
Wall tiles -Local
Tiles glazed with all specials , supplying and fixing to walls including
raking plaster backing in cement mortar 1:3 and pointed with tile grout
to match the tiles.(Lanka wall Tiles or equivalent brand)
--Do-- for Coloured, white or printed 10 "x13"
Prime Cost of, Glazed colour walls Tiles 10"x 13" (Lanka Walltile or equi)=Rs.136

F031 --Do-- for Coloured, white or printed 8 "x8"


Prime Cost of, Glazed colour walls Tiles 8 "x8" (Lanka Walltile or equi)=Rs.69

--Do-- for Coloured, white or printed 8 "x12"


Prime Cost of, Glazed colour walls Tiles 8"x12" (Lanka Walltile or equi)=Rs.101

F033

--Do-- for Coloured, white or printed 8 "x16"


Prime Cost of, Glazed colour walls Tiles 8 "x16" (Lanka Walltile or equi)=Rs.132

This BSR is for Maintenance works only

120137

S07- 39

588

120138

sq.ft

1,996

120139

1,063

120140

727

120141

sq.ft

382

120087

sq.ft

F025 --Do-- for,16" x 16" in size.

F032

295

sq.ft

F023 --Do-- for, 36"x18" MATT floor tile

F030

sq.ft

sq.ft

F022 --Do-- for, 24"x24" MATT floor tile

F029

BSR Rate
2016

sq.ft

F020 --Do-- for, 24"x16" MATT floor tile

F027
F028

Item
Unit

368

120088

L.ft

151

120130

Sqr

29,722

sq.ft

295

sq.ft

105

sq.ft

319

120099

sq.ft

322

120100

sq.ft

317

120101

sq.ft
120102

312

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

F034 --Do-- for Coloured, white or printed 12 "x16"


Prime Cost of, Glazed colour walls Tiles 12"x16" (Lanka Walltile or equi)=Rs.246

F035 --Do-- for Coloured, white or printed 12 "x24"


Prime Cost of, Glazed colour walls Tiles 12"x24" (Lanka Walltile or equi)=Rs.400

Wall tiles (Fixing only)


Fixing tiles on walls with all specials , including raking plaster backing
in cement mortar 1:3 and pointed with tile grout to match the tiles.
(Tiles supplied by the client or paid separately.)
F036 --Do-- for size up to 8 "x16".
F037 --Do-- for size up to 12 "x24".
Border Tiles for Wall (Decorative)
F038 Boarder tiles glazed colour 8"X3", with decorative patterns ,
supplying and fixing to walls including raking plaster backing in
cement mortar 1:3 and pointed with tile grout to match the
tiles.(Lanka wall Tiles or equivalent, Range of a Tile Price : Rs80-149)

Item
Unit

BSR Rate
2016

sq.ft

369

120103

sq.ft

390

120104

sq.ft
sq.ft

104
111

L.ft

320

L.ft

483

L.ft

349

L.ft

455

sq.ft

1,102

F039 Boarder tiles glazed colour 8"X3", with decorative patterns ,


supplying and fixing to walls including raking plaster backing in
cement mortar 1:3 and pointed with tile grout to match the
tiles.(Lanka wall Tiles or equivalent, Range of a Tile Price Rs150-218)
F040 Boarder tiles glazed colour 12"X3", with decorative patterns ,
supplying and fixing to walls including raking plaster backing in
cement mortar 1:3 and pointed with tile grout to match the
tiles.(Lanka wall Tiles or equivalent, Range of a Tile Price : Rs155231)
F041 Boarder tiles glazed colour 12"X3", with decorative patterns ,
supplying and fixing to walls including raking plaster backing in
cement mortar 1:3 and pointed with tile grout to match the
tiles.(Lanka wall Tiles or equivalent, Range of a Tile Price : Rs232307)
Granite flooring-Local
F042 Granite floor tiles 12" x 12"x1/2" (Local) supplying and fixing to
floors including raking plaster bedding with cement mortar 1:3.
Prime Cost of, Granite floor tiles 12" x 12"x " (Local, Range 1)=Rs.750

F043 Granite floor tiles 24" x 12"x3/4" (Local) supplying and fixing to
floors including raking plaster bedding with cement mortar 1:3.
Prime Cost of, Granite floor tiles 24" x 12"x" (Local, Range 2)=Rs.2700

F044 Labour cost for fixing 12" x 4"x1/2" Granite skirting to bottom line of
walls including cutting ,rounding & Forming edges polishing etc.
Glass block
F045 Glass block 8" x 8" with all specials supplying and fixing to walls
including raking plaster and bedding in cement mortar 1:3.

This BSR is for Maintenance works only

S07- 40

120108

sq.ft

1,887

120109

L.ft

127

sq.ft

1,482

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

F046

F047

F048

F049

F050

F051

F052

F053

F054

Description

PVC carpeting
Supplying and laying PVC carpeting with necessary adhesive etc.
(Upto 150 sq.ft only)
Vinyl Sheet Flooring
Supplying and laying 2mm thick Vinyl Flooring with necessary
adhesive etc. (Mipolam 150 or equivalent) (Upto 150 sq.ft only)
Vinyl Tile
Supplying and laying 2mm thick Vinyl tile with necessary adhesive
etc. (Mactile - Gerflor or equivalent) (Upto 150 sq.ft only)
Loop pile carpeting
Supplying and laying Loop pile carpeting with 5mm thick with
Mcfoam under layer , firmly bonded to the existing floor. Carpet
having primary & Secondary backings, namely polypropylene &
Classic back respectively. And having the minimum pile weight of 20
Oz-USA per sq. yard. & loop density of 6,100 Oz/Cu.yard. (Neyland
II or equivalent) (Upto 150 sq.ft only)
Cut pile carpeting
Supplying and laying 1/8 gauged, Wide Open Cut pile carpeting (USA
or equivalent) with 5mm thick with Mac Form under layer , firmly
bonded to the existing floor. Carpet having primary & Secondary
backings, namely woven polypropylene & Classic back polypropylene,
respectively. And having the minimum pile weight of 30 Oz per sq.
yard. & loop density of 5320 Oz/Cu.yard. (Upto 150 sq.ft only)
Interlocking paving
Supplying and Laying 80mm thick "Uni" type Coloured interlocking
paving blocks having Compressive Strength of 40N/mm2, layed on
plain improved sub surface. Rate inclusive for Quarry dust bedding
(Upto 150 sq.ft only)
Supplying and Laying 80mm thick "Uni" type Natural cement colour
interlocking paving blocks having Compressive Strength of 40N/mm2,
layed on plain improved sub surface. Rate inclusive for Quarry dust
bedding. (Upto 150 sq.ft only)
Paving tile Slabs
Supplying and Laying 300 x300 x50mm thick Non Reinforced,
Natural cement colour, Concrete paving Slab, layed on plain
improved sub surface. Rate inclusive for Quarry dust bedding. (Upto
150 sq.ft only)
Supplying and Laying 300 x300 x50mm thick Reinforced, Natural
cement colour, Concrete paving Slab, layed on plain improved sub
surface. Rate inclusive for Quarry dust bedding. (Upto 150 sq.ft only)

This BSR is for Maintenance works only

S07- 41

Item
Unit

BSR Rate
2016

sq.ft

Deleted

sq.ft

270

sq.ft

157

sq.ft

169

sq.ft

326

sq.ft

346

sq.ft

312

sq.ft

254

sq.ft

367

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Sqr

3,120

Sqr

37,081

Sqr

33,088

Sqr

11,443

Sqr

32,570

Sqr

33,113

Sqr

12,011

Sqr

15,716

sq.ft

219

Sqr

38,512

Sqr

39,332

G-ROOFER
Corrugated sheets
G001 Corrugated sheets, iron, asbestos or Aluminium alloy fixed with hook
bolts and nuts to roofing or walling, (Corrugated sheets available).

G002

G003

G004

G005

G006

Corrugated Aluminium sheets


Corrugated Aluminium sheets 24 B.W.G roofing on
(Group3,Category A) timber purlins supplied and fixed with
Aluminium hooks and nuts or Aluminium drive screws including
limpet washers etc.: complete with Aluminium ridging, including
treating timber with wood preservative
Corrugated Aluminium sheet walling 24 B.W.G on 4" x 2"
(Group3,Category A) timber framework, sheets to have 4" end lap and
1" corrugation side lap. (Wall plate measured separately).
Corrugated Aluminium sheets 24 B.W.G supplied and fixed to roof or
wall (on existing framework) with hook bolts or drive screws etc.:
Sheets to have 4" end lap and 1" corrugation side lap. (Wall plate
measured separately).
Corrugated Asbestos Sheets
Corrugated asbestos (Mascons or equivalent.) sheet roofing on
(Group3,Category A) timber purlins supplied and fixed complete
including treating timber with wood preservative (Ridging measured
separately).
Corrugated asbestos (Mascons or equivalent.) sheet walling on 4"x2"
(Group3,Category A) timber framework supplied and fixed complete.

G007 Corrugated asbestos sheets supplied and fixed to roof or wall on


existing framework with necessary coach screws and limpet washers
or hook bolts.
Corrugated Asbestos "Colorup" Sheets
G008 Corrugated asbestos "Colorup" Sheets supplied and fixed to roof
or wall on existing framework with necessary coach screws and
limpet washers or hook bolts.
Zinc Aluminium Sheet Roofing
G009 Supplying and fixing Zinc Aluminium roofing sheets (0.47 gauge)on
existing frame work using nut & bolt / self tapping screws or fasteners.
(Rhino Supermet or Equivalent.)
Corrugated galvanized iron Sheet Roofing
G010 Corrugated galvanized iron Roofing 24 B.W.G on (Group3,Category
A) timber purlins supplied and fixed complete with G.I ridging,
washers, hook bolts or clips including treating timber with wood
preservative. (Sheets to have 6" end laps and 1ft 1/2" corrugation
side )
G011 Supplying and fixing 22 B.W.G Corrugated G.I walling on
(Group3,Category A) timber framework
This BSR is for Maintenance works only

S07- 42

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

G012 Corrugated G.I sheets 24 B.W.G supplied and fixed to roof, wall or
fence with necessary cup washers and hook bolts and screws. (Timber
framework paid for separately).
Leaks -on roofs
G013 Leaks (up to 5 in number) in Tiled roofs of single storeyed buildings
made good.
G014 Leaks (above 5 in number) in roofs of single storeyed buildings made
good.
G015 Leaks (Up to 5 in number) in roofs of buildings above one story made
good).
G016 Leaks (above 5 in number) in roofs of buildings above one story made
good).
G017 Leaks in corrugated sheet roofs made good with bitumen washers and
G.I bolts and nuts.
G018 Leaks in corrugated sheet roofs patched with jute hesseain dipped in
Asphalt and laid over with cement and sand layer above.
Ridging
G019 Ridging, asbestos cement, Aluminium alloy, or G.I available, fixed
with hook bolts or screws.
G020 Ridging, Calicut pattern, bedded in cement and lime mortar 1:1:4,
Coloured to match tiles.
G021 Ridging, Calicut pattern bedded in cement and lime mortar 1:1:4,
Coloured to match tiles, (Tiles available at site).
G022 Ridging, Galvanized iron 24 B.W.G 18" wide overall supplied and
fixed complete.
G023 Ridging with asbestos cement close fitting ridges (Mascons or
equivalent.) supplied and fixed complete with roofing screws or hook
bolts.
G024 Ridging, half round tiles, bedded in lime, cement mortar 1:1:4 and
Coloured to match tiles.
G025 Ridging with half round tiles bedded in lime cement mortar 1:1:4 and
Coloured to match tiles (Tiles available at site).
G026 Ridging, half round or Calicut pattern removed and re-laid in cement
lime mortar 1:1:4 and Coloured to match tile.
Zinc Aluminium ridge capping
G027 Supplying and fixing Zinc Aluminium ridge capping (width 914mm )
0.47 gauge, to existing sheet roof, using new fasteners or st /screws.
(Rhino Supermet or Equivalent.)
G028 Supplying and fixing Zinc Aluminium ridge capping(457mm girth) (
.47 gauge ) , to existing sheet roof, using new fasteners or st /screws.
(Rhino Supermet or Equivalent.)
Skylight glass
G029 Skylight glass 2ft 0"x2ft 0", 1/4" thick ribbed, supplied & fixed to roof
including necessary lime cement filleting.

This BSR is for Maintenance works only

S07- 43

Item
Unit

BSR Rate
2016

Sqr

5,512

Nos

159

Nos

40

Nos

199

Nos

80

Nos

188

Nos

155

L.ft

107

L.ft

178

L.ft

125

L.ft

379

L.ft

385

L.ft

176

L.ft

146

L.ft

167

L.ft

642

L.ft

439

Nos

2,206

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

G030
G031
G032
G033
G034
G035
G036
G037
G038
G039

Description

Tiles, Calicut pattern, flat


Note: Refer Item numbers From H100 & H101 for Roofs with
Calicut pattern tiles on (Group3, Category A) sawn timber
framework
Tiles, Calicut pattern, flat, supplied and laid up to 5 tiles in single
storeyed buildings.
Tiles, Calicut pattern, flat, supplied and laid (above 5 and up to 25) in
Single Storeyed buildings.
Tiles, Calicut pattern, flat, supplied and laid up to 5 Tiles in buildings
of more than one story.
Tiles, Calicut pattern, flat, supplied and laid above 5 and up to 25 in
buildings of more than one story.
Tiles Calicut pattern, supplied and laid in any building.
Tiles Calicut pattern laid in any building (tiles available at site).
Tiles Calicut pattern, ventilator, supplied and laid in single storeyed
building.
Tiles Calicut pattern, ventilator, supplied and laid in buildings of over
one story.
Tiles, Fiber glass, laid in small quantities including fixing with G.I
wire where necessary (tiles available at site)
Tiles, Fiber glass, Calicut pattern, supplied and fixed.
Tiles half round
Note: Refer Item numbers From H102 & H103 for Roofs with
Half round tiles on (Group3, Category A) sawn timber framework

G040 Tiles half round supplied and laid, up to 50, in single storeyed
buildings.
G041 Tiles half round supplied and laid, above 50 and up to 100 in single
storeyed buildings.
G042 Tiles, half round, supplied and laid up to 50 on buildings of more than
one story.
G043 Tiles, half round above 50 and up to 100 in number supplied and laid
on roof of buildings of more than one story.
G044 Tiles half round, supplied and laid in any building.
G045 Tiles, half round, laid in any building (Tiles available at site)
G046 Shifting and re-laying half round tiles.
G047 Shifting and re-laying Calicut pattern tiles.
G048 Supplying and laying half round tiles on the existing asbestos roof.
Structural Steel Purlins for Roof
Supplying & Fixing Structural & Mild Steel "C"" channel purling,
together with 75mmx75mmx6mm L-Iron cleats on roof truss with
10mm dia. Bolt and nuts. (Painting Paid for separately)
G049 --Do-- for (weight 6.7 Kg/m) & 76x38mm size "C" channel purling
G050 --Do-- for (weight 10.42 Kg/m) & 102x51mm size "C" channel
purling
This BSR is for Maintenance works only

S07- 44

Item
Unit

BSR Rate
2016

Nos

97

Nos

85

Nos

116

Nos
Sqr
Sqr

93
10,002
477

Nos

191

Nos

312

Nos
Nos

60
993

Nos

30

Nos

28

Nos

34

Nos
Sqr
Sqr
Sqr
Sqr
Sqr

32
16,193
953
715
318
8,509

L.ft

488

L.ft

584

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

G051 --Do-- for (weight 14.9 Kg/m) & 127x64mm size "C" channel
purling,
G052 --Do-- for (weight 17.88Kg/m) & 152x76mm size "C" channel
purling,
High tensile Galvanized steel, C-channel purlins for Roof
Supplying & Fixing High tensile Galvanized Steel "C" channel
purlins, having the member thickness of 2.0mm (Tensile strength 450
N/mm2) standards complying with JISG 3302. Each Purlins
connected with 75mmx75mmx6mm L-Iron cleats on roof truss
together with 10mm dia. Bolt and nuts. (Painting is not considered)
G053 --Do-- with the sectional dimensions of "C" channel ,
100mmx50mmx15mm
G054 --Do-- with the sectional dimensions of "C" channel ,
150mmx65mmx20mm
Heat and Sound insulation (Double side luminary Aluminium
foil)
G055 1/2" thick heat and sound insulation sheet laying on 3"x3" GI mesh
existing steel purling and fixing with binding
Timber Members for Roofing
Note:- Please find Timber Reapers from Item No H095 to H099
G056 Supply and fixing 2''x2'' (Group3,Category A) timber Battons in roof
work, with nails over 100' 0"
G057 Supply and fixing 4''x2'' (Group3,Category A) timber rafters for roof
work.
G058 Supply and fixing 7''x2'' (Group3,Category A) timber ridge plate in
roof work.
G059 Supply and fixing 4''x3'' (Group3,Category A) timber wall plate in
roof work.
G060 Supply and fixing 5''x3'' (Group3,Category A) timber purling in roof
work.
G061 Supply and fixing 4''x3'' (Group3,Category A) timber Struts, up to 6'
height in roof structure, including forming necessary Timber joints at
both ends. 2' Timber bearer provided at Bottom.

This BSR is for Maintenance works only

S07- 45

Item
Unit

BSR Rate
2016

L.ft

897

L.ft

965

L.ft

298

L.ft

373

sq.ft

110

L.ft

131

L.ft

289

L.ft

568

L.ft

450

L.ft

576

L.ft

645

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

H001
H002
H003
H004
H005
H006

H007

H008

H009

H010

H011
H012

H013

H014

Description

H-CARPENTER & JOINER


Beading, Burma Teak, 1 1/2" to 2" x1/2" plain chamfering, supplying
and fixing complete with brass screws.
Beading, Burma Teak, 1"x 3/4" plain chamfering, supplying and fixing
complete with brass screws.
Beading, Alstonia or local timber 1 1/2" to 2"x1/2" plain chamfering,
supplying and fixing complete with brass screws.
Beading, Halmilla, 1 1/2" to 2" x 1/2", plain chamfering, supplying
and fixing complete with brass screws.
Beading or filleting in Ginisapu or local timber for glass panes
supplying and fixing complete with brass springs or brass panel pins.
Beading or filleting on underside of ceiling removing and re-fixing
with brass screws complete.
Boards, barge, valance, fascia
Boards, barge, valance, fascia, 9" wide & 1" thick, in (Group
5,Category A), local timber fixing complete with necessary screws
new or renewing.(above one Cubic foot)
Boards, barge, valance, fascia, 9" wide & 1" thick, in (Group
5,Category A),local timber supplying and fixing complete with
necessary screws new or renewing, up to 1 Cu.ft.
Boards, barge, valance, fascia, 9" wide & 1" thick, in (Group
5,Category B), local timber fixing complete with necessary screws
new or renewing.(above one Cubic foot)
Boards, barge, valance, fascia, 9" wide & 1" thick, in (Group
5,Category B),local timber supplying and fixing complete with
necessary screws new or renewing, up to 1 Cu.ft.
Boards, barge, valance, fascia, available, fixing including cutting and
minor repairs.
Boards, barge, valance, fascia, 10" wide & 1" thick, in imported
timber (Kempas or Tulan) fixing complete with necessary screws new
or renewing.
Ceiling / Partition
Ceiling, asbestos (Mascons or equivalent.) , flat fixing with clout
headed nails to 4" x 2" joists and 2"x2" bearers of (Group 4,Category
A) timber, including 1 1/2" x 1/2" cover fillets and 2 1/2" x 1 1/2"
coves of Alstonia or equivalent timber. Rate to include 2 coats of
wood preservatives to joists and bearers. Primer undercoating and two
coats of emulsion paint to Asbestos sheets.
Flat asbestos (Mascons or equivalent.) horizontal eaves ceiling
comprising 2" x 2" bearars in (Group 4,Category A) timber, asbestos
sheet supplied and fixed with beadings & cove moulding, rate to
include for applying wood preservative to timber frame, two coats
enamel paint for beadings, and two coats of emulsion paint to ceiling.

This BSR is for Maintenance works only

S07- 46

Item
Unit

BSR Rate
2016

L.ft

151

L.ft

124

L.ft

40

L.ft

87

L.ft

49

L.ft

33

L.ft

371

L.ft

379

L.ft

195

L.ft

198

sq.ft

69

L.ft

582

Sqr

41,758

Sqr

30,565

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Sqr

1,339

Sqr

6,595

L.ft
Sqr

75
2,350

Sqr

12,535

Sqr

13,075

Sqr

10,948

Sqr

13,443

Nos
Sqr

1,935
239

Sqr

39,406

Sqr

41,717

sq.ft

Deleted

sq.ft

600

H015 Ceiling, asbestos, plywood, available, cut and fixing on existing


bearers, rafters or frames (beading or cover fillets paid for separately)
H016 Ceiling or partition, asbestos supplying and fixing with clout headed
nails to existing bearers, rafters or frames (Beadings or cove fillets
paid for separately)
H017 Ceiling board, 6" x 5/8" to 3/4", lunumedella, renewing in small
quantities rate to include for scaffolding (up to 30 L.ft.)
H018 Ceiling, Lunumedella, available at site, fixing with new wire nails.
H019 Ceiling or partition, Lunumedella, 1/2" planed, lapped and nailed to
existing frames or underside of rafters, above 1 square (Fillets and
beadings paid for separately)
H020 Ceiling or partition, Lunumedella, 1/2"planed, lapped and nailed to
existing frames or underside of rafters, up to 1 square (Fillets and
beadings paid for separately)
H021 Ceiling or partition, Lunumedella, 1/2" beading and rebating, nailing to
underside of existing joists, rafters or frames, above one square (Fillets
and beadings, paid for separately)
H022 Ceiling or partition, Lunumedella, 5/8" beading and rebating, nailing to
underside of existing joists, rafters or frames, up to one square (Fillets
and beadings, paid for separately)
H023 Ceiling openings 2ft 0" x 1ft 6" approx., forming complete with 2" x
2" bearers. (Glass tiles or sheets paid for separately)
H024 Ceiling, upper side cleaning and debris clearing away.
H025 Ceiling Lunumedella 1/2" planks, lapped and nailed to framework
consisting of finished size with 3 3/4" x 1 3/4" joists and 1 3/4" x 1
3/4" bearers in (Group 4,Category A) timber, Rate to include for 2
coats of wood preservatives to joists and bearers.
H026 Ceiling Lunumedella 3/4" thick planks, lapped and nailed to
framework consisting of finished size with 3 3/4" x 1 3/4" joists and 1
3/4" x 1 3/4" bearers in (Group 4,Category A) timber, Rate to include
for 2 coats of wood preservatives to joists and bearers.
Partitions
H027 Partitions paneling 7 ft 0" to 10 ft 0" with 1/2" thick chipboard with
finished size 3 3/4" x 1 3/4" and 3 3/4" x 3 3/4" upright fixed at 3ft
0" interval and 4" x 2" as horizontal members in (Group 4,Category
A) timber. Rate to include for fixing chipboard to both sides. data 9ft
9"x7ft 0"=6
H028 Partition - panelled with 3/8" chipboard with finished size 3' 3/4"x 1'
3/4"and 3' 3/4"x 3' 3/4" uprights fixing at 3' 0" interval sand 4"x 2"
as horizontal members in (Group 4,Category A) timber. Rate to
include for fixing chipboard to both sides. data 9ft 9"x7ft 0"=68.25
sq.ft

This BSR is for Maintenance works only

S07- 47

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

H029 Partitions glazed 7ft -0" - 10ft -0" height 3/16" thick and paneling
1/2" thick plywood with finished size 3 3/4" x 2 3/4" and 3 3/4" x 3
3/4" upright at 3ft 0" intervals and 4" x 2" as horizontal members in
(Group 4,Category A) timber. Rate to include for fixing chipboard to
both sides of frame2"x1/2" (Group 4,Category A) timber boarding
around glass pane.
H030 Partitions glazed 7ft 0" - 10ft -0" height 3/16" thick and paneling 3/8"
thick plywood with finished size 3 3/4" x 2 3/4" upright at 3ft 0"
interval and 4" x 2" as horizontal members in (Group 4,Category A)
timber. Rate to include for fixing chipboard to both sides of frame 2"
x 1/2"
H031 Partitions available fixing, including making good to walls and floors.
H032 Partitions, fully paneling, or paneling and glazing 1 1/8" thick with
4" x 2" frames and 1" x 1" quadrant fillets supplying and fixing
complete with brass screws in (Group 4,Category A) local timber.
H033 Partitions, glazing and paneling with plywood panels in (Group
4,Category A) timber (main posts 4" x 4" x 10ft 0" intermediate
posts 4" x 2" x 7ft 0" approx., and 1 1/2" x 8" capping complete)
Plywood Panels
H034 Plywood panels, 3 ply, supplying and fixing to existing frames
(beadings to be paid for separately)
Cove, mouldings
H035 Cove, mouldings, Halmilla 2 1/2" x 1 1/2" fixing with brass screws
and plugs new or renewing.
H036 Cove, mouldings, Alstonia or equivalent 2 1/2" x 1 1/2" fixing with
brass screws and plugs new or renewing.
Doors or windows
H037 Doors or windows, legging, bracing and battening with groove and
tongue joints finished size 3 3/4" x 2 3/4" frames and 3/4" to 7/8"
thick sashes in (Group 2,Category A) local timber complete with
brass furniture(Rim lock, Hinges).( Door Size 2' 6"x6' 6" = 16s.ft)
H038 Doors or windows, legging, bracing and battening with groove and
tongue joints finished size 3 3/4" x 2 3/4" frames and 3/4" to 7/8"
thick sashes in (Group 2,Category B) local timber complete with
brass furniture.( Door Size 2' 6"x6'x 6" = 16s.ft)
H039 Doors or windows ledging, bracing and battening, 3/4" to 7/8" thick
sash only, in (Group 2,Category A) timber supplying and fixing with
available (brass/Iron) furniture.
H040 Doors or windows ledging, bracing and battening, 3/4" to 7/8" thick
sash only, in (Group 2,Category B) timber supplying and fixing with
available (brass/Iron) furniture.
H041 Doors or windows, framing and battening, with finished size 3 3/4" x 2
3/4" frames and 1" to 1 1/8" sashes in (Group 2,Category A) local
timber complete with brass furniture.

This BSR is for Maintenance works only

S07- 48

Item
Unit

BSR Rate
2016

sq.ft

624

sq.ft
sq.ft

607
52

sq.ft

1,162

sq.ft

1,263

sq.ft

Deleted

L.ft

190

L.ft

136

sq.ft

1,598

sq.ft

1,007

sq.ft

1,011

sq.ft

693

sq.ft

1,665

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

H042 Doors or windows, framing and battening, with finished size 3 3/4" x 2
3/4" frames and 1" to 1 1/8" sashes in (Group 2,Category B) local
timber complete with brass furniture.
H043 Doors or windows, framing and battening, with finished size 3 3/4" x 2
3/4" frames and 1 1/4" to 1 1/2" sashes in (Group 2,Category A) local
timber complete with brass furniture.
H044 Doors or windows, framing and battening, with finished size 3 3/4" x 2
3/4" frames and 1 1/4" to 1 1/2" sashes in (Group 2,Category B) local
timber complete with brass furniture.
H045 Doors or Windows, sash only 1" to 1 1/8" thick in (Group 2,Category
A) timber supplying and fixing complete with available
(brass/Iron)furniture.
H046 Doors or Windows, framing and battening, sash only 1" to 1 1/8" thick
in (Group 2,Category B) local timber, supplying and fixing complete
with available (brass/Iron)furniture.
H047 Doors or Windows, sash only 1 1/4" thick in (Group 2,Category A)
timber supplying and fixing complete with available
(brass/Iron)furniture.
H048 Doors or Windows, sash only 1 1/4" to 1 1/2" thick in (Group
2,Category B) local timber supplying and fixing complete with
available (brass/Iron) furniture.
H049 Doors for garages, framing and battening in (Category A) timber with
5" x 4" frames and 1 1/2" thick sashes supplying and fixing complete
with iron pintols and strap hinges.
H050 Doors or Windows, glazing and/or paneling with finished size 3 3/4"
x 2 3/4" frames (Group 1,Category A) and 1 1/8" to 1 1/4" sashes in
(Group 2,Category A) local timber supplying and fixing complete with
brass furniture.
H051 Doors or Windows, glazing and/or paneling with finished size 3 3/4"
x 2 3/4" frames (Group 1,Category B) and 1 1/8" to 1 1/4" sashes in
(Group 2,Category B) local timber supplying and fixing complete with
brass furniture.
H052 Doors or Windows, glazing and/or paneling, sash only 1 1/8" to 1
1/4" thick in (Group 2,Category A) timber with available (brass/Iron)
furniture.
H053 Doors or Windows, glazing and/or paneling, sash only 1 1/8" to 1
1/4" thick in (Group 2,Category B) timber with available (brass/Iron)
furniture.
H054 Doors paneling and trellising B.R.C. weld mesh No.32, with 4 3/4" x 2
3/4" frames (Group 1,Category A) and 1 1/8" thick sashes in (Group
2,Category A) timber, supplying and fixing complete with brass
furniture.
H055 Doors paneling and trellising B.R.C. weld mesh No.32 sash only 1
1/8",supplying and fixing with available (brass/Iron)furniture.

This BSR is for Maintenance works only

S07- 49

Item
Unit

BSR Rate
2016

sq.ft

1,090

sq.ft

1,571

sq.ft

1,138

sq.ft

978

sq.ft

694

sq.ft

1,006

sq.ft

721

sq.ft

1,153

sq.ft

1,782

sq.ft

1,029

sq.ft

1,130

sq.ft

777

sq.ft

1,336

sq.ft

803

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

H056 Doors, paneling and trellising/B.R.C. weld mesh No.32 sash only 1
1/4" thick in (Group 2,Category A) timber with available furniture.
H057 Doors paneling with finished size 3 3/4" x 2 3/4" frames (Group
1,Category A) and 1 1/8" - 1 1/4" sashes in (Group 2,Category A)
timber supplying and fixing complete with available (brass/Iron)
furniture.
H058 Door or Window, removing, easing and re-fixing.
H059 Door or Window, easing only.
H060 Door or Window frames renewing in short lengths with (Group
2,Category A) timber. assume 3ft length of door frame renewed. 5'
x3'
H061 Door or Window frame altering, existing rebate fillet using (Group
2,Category A) timber with screws and sashes rehung on opposite side.
H062 Door or Window, Glazing bars renewing in (Group 2,Category A)
timber.
H063 Door Stops in (Group 2,Category A) timber 1 1/2" x 1 1/2" x 5"
tapering, supplying and fixing.
H064 Door or Window sashes, available, fixing in position (sash and fittings
available at site)
H065 Door sashes swing, removing and re-fixing in new position.
H066 Doors, swing 1" thick in (Group 2,Category A) timber with ( ")
width Ply wood panels supplying and fixing complete with brass
gravity hinges.
Door frame
H067 Door frame with finished size 3 3/4" x 2 3/4" in (Group 1,Category
A) timber supplying & fixing in position. (data 2' 6"x 6' 6" =16.25s.ft
or 16.5' ft long)
H068 Door frame with finished size 3 3/4" x 1 3/4" in (Group 1,Category
B) timber supplying and fixing in position. (data 2' 6"x 6' 6" =16.25s.ft
or 16.5' ft long)
H069 Door frame with finished size 3 3/4" x 2 3/4" in (Group 7,Category
A) timber supplying & fixing in position. (data 2' 6"x 6' 6" =16.25s.ft
or 16.5' ft long)
Window frame
H070 Window frame with finished size 3 3/4" x 1 3/4" in (Group
7,Category B) timber supplying and fixing in position. (data6' x4'
=24s.ft or28 ft long)
Plywood Door
** Note:(Brand - GINTOTA or equivalent)
H071 Door,1 1/4" thick plywood ordinary finish (Moisture Resistant) single
sash, size 2' 9"x6' 9", hung on finished size 3 3/4" x 2 3/4" frame in
(Group 1,Category A) timber and complete with brass furniture's.
.(Door Lock paid Separately)

This BSR is for Maintenance works only

S07- 50

Item
Unit

BSR Rate
2016

sq.ft

867

sq.ft
Nos
Nos

1,768
405
151

L.ft

891

Nos

3,361

L.ft

225

Nos

266

Nos
Nos

881
540

sq.ft

1,057

L.ft

567

L.ft

253

L.ft

778

L.ft

813

sq.ft

995

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

H072 Door,1 1/4" thick plywood ordinary finish (Moisture Resistant) single
sash, size 2' 9"x6' 9", hung on finished size 3 3/4" x 2 3/4" frame in
(Group 1,Category B) timber and complete with brass furniture's.
.(Door Lock paid Separately)
H073 Supplying and fixing Door 1" thick, plywood, ordinary finish
(Moisture Resistant), single sash, size 2' 9"x6' 9",hung to the existing
frame including necessary brass fittings.(Door Lock paid Separately)
data 2ft 9"x6ft 9"=18.56s.ft
H074 Supplying & fixing ,1 1/4" thick Ply wood door, Both Side Luxury
finish (Moisture Resistant) ,size 2' 9"x6' 9", single sash, hung to
existing frame including necessary brass fittings.(Door Lock paid
Separately) data 2ft 9"x6ft 9"=18.56s.ft
Doors or windows framing and battening sash
H075 Doors or windows framing and battening finished size with 3 3/4"
x 2 3/4" frames and 1 1/4" to 1 1/2" sashes in (Group 7, Category A)
local timber complete with brass furniture.
H076 Doors or windows framing and battening sash only 1" to 11/8" thick in
(Group 7, Category A) timber supplying and fixing complete with
available furniture.
H077 Door or windows framing and battening sash only 1 1/4" to 1 1/2"
thick in (Group 7, Category A) timber supplying and fixing complete
with available furniture.
Doors glazing and/or paneling
H078 Doors glazing and/or paneling finished size with 3 3/4"x2 3/4" frames
and 1 1/8" to 1 1/4" thick sashes in (Group 7, Category A) timber
supplying and fixing complete with brass furniture.
H079 Doors glazing and/or paneling sash only 1 1/8" to 1 1/4" thick in
(Group 7, Category A) timber special class with available ironmonger.
H080 Windows glazing and paneling finished size with 3 3/ 4" x 2 3/4" frame
and 1 1/8" to 1 1/4" thick sash in (Group 7, Category A) timber
supplying and fixing complete with brass furniture.
H081 Windows glazed and panelled, sash only 1 1/8" to 1 1/4" thick in
(Group 2, Category A) timber with available ironmonger.
Fillets, quadrant
H082 Fillets, quadrant 3/4" x 3/4" supplying and fixing with nails, in (Group
6) timber.
H083 Fillets, quadrant 1" x 1" in (Group 6) timber supplying and fixing with
nails.

This BSR is for Maintenance works only

S07- 51

Item
Unit

BSR Rate
2016

sq.ft

841

sq.ft

512

sq.ft

828

sq.ft

2,118

sq.ft

1,186

sq.ft

1,332

sq.ft

1,787

sq.ft

1,545

sq.ft

2,226

sq.ft

972

L.ft

34

L.ft

38

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

H084

H085

H086

H087

H088

H089
H090
H091

H092

H093

H094

H095

H096
H097

Description

Timber Gate
Gate, 1 3/4" as per type plan for bungalow, 6 1/2" top rail, with 2
3/4" x 3/4" weather capping, 8" lock and bottom rails and styles,
splay meeting styles, 2" x 1 1/4" verticals at 3 1/2" centers in groups
of 3, panels of 4" x3/4" groove and tongued boards fixed raking, and
1/2" dia. tension bars fixed complete using available fittings.(Group 1,
Category A) local timber.
Gate 1 3/4" thick for bungalows, 4" top rails and styles, 8" bottom
rails, 3" braces, 1 3/4" x 1 3/4" and 1" x 1 1/4" verticals at 4" centers
supplying and fixing complete using available fittings (Group 1,
Category A) local timber.
Gate 1 1/2" thick, with 4" top and bottom rails, styles and braces and
2" x 1" laths fixing at 4" centers supplying fixing complete with
available furniture (Group 1, Category A) local timber.
Gate 1 3/4" thick with 4" top and bottom rails, styles and braces, and
3/4" bars at 4" centers supplying fixing complete with available fittings
(Group 1, Category A) local timber.
Gate sash with gate posts available at site, fixing complete including
fixing post (Gate and Posts available).
Louver blades
Louver blades 3/8" minimum thickness in (Group 1, Category A)
timber up to 4" width supplying and fixing.
Louver blades 3/8" minimum thickness in (Group 1, Category A)
timber over 4" and up to 6".
Louver blades 3/8" minimum thickness in (Group 1, Category A)
timber over 6" and up to 9".
Wooden Posts
Posts, veranda, 5" x 5" tapering to 4" x 4" in (Group3, Category A)
timber, supplying and fixing on spur stones (spur stones paid for
separately)
Posts, veranda 6" x 6" tapering to 5" x 5" in (Group3, Category A)
timber supplying and fixing on spur stones (spur stones paid for
separately)
Posts, Wooden, round jungle timber 5" minimum and average 6" dia.
supplying and fixing.
Reapers, timber
Reapers 2" x 1" in (Group3, Category A) timber supplying and fixing
new or renewing with iron nails, up to 100 L.ft: (Shifting of tiles to be
paid for separately)
Reapers 2" x 1" in (Group3, Category B) local timber up to 100 L.ft:
supplying and fixing.
Reapers 2" x 1/2" in (Group3, Category A) timber supplying and
fixing, new or renewing, with iron nails up to 100 L.ft: (Shifting of
tiles to be paid for separately)

This BSR is for Maintenance works only

S07- 52

Item
Unit

BSR Rate
2016

sq.ft

1,363

sq.ft

1,030

sq.ft

628

sq.ft

1,178

Nos

1,255

L.ft

155

L.ft

176

L.ft

242

L.ft

1,085

L.ft

1,531

L.ft

70

L.ft

36

L.ft

29

L.ft

25

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

H098 Reapers 2" x 1/2" in (Group3, Category A) timber supplying and


fixing new or renewing, with iron nails over 100 L.ft:
H099 Reapers, available fixing with wire nails.
Roof with sawn timber framework & Covering Tiles on it
H100 Roof with Calicut pattern tiles on (Group3, Category A) sawn timber
framework complete with ridges, hips etc.
H101 Roof with Calicut pattern tiles on (Group3, Category B) sawn timber
framework complete with ridges, hips etc.
H102 Roof with half round tiles on (Group3, Category A) sawn timber
framework complete with ridges, hips etc.
H103 Roof with half round tiles on (Group3, Category B) timber framework
complete with ridges, hips etc.
Shelving
H104 Shelving in (Group2, Category A) timber 1" thick on triangular
brackets with 2 Nos. Horizontals 1 1/2" x 3/4" and 1 1/2" x 1/2"
verticals and struts, and 2" x 1" skirting as per Type Plan 31638,
supplying and fixing to walls with plugs. (Shelving area to be
measured separately.
H105 Shelving in (Group2, Category A) timber 1" thick framing with 2"x2"
uprights and 2" x 2" horizontals and 2" x 1/2" skirting supplying and
fixing to wall as per type plan 17988 Shelving area to be measured
separately.
H106 Shelving of the types as per plan no 31638, 17988 removed and
refixing new possession.
Skirting
H107 Supplying and fixing Skirting in (Group5, Category A) board 3"x"
on walls.
H108 Supplying and fixing Skirting in (Group5, Category A) timber boards,
6"x " on walls.
Other Carpentry work.
H109 Timber available, sorted out, cut to required sizes and fixing in
partitions and frames. per 10 L.ft 4x3 or 4x6 Cu.ft
H110 Timber, available, sorted out, cut to required sizes and fixing in roof
and other carpentry work.
H111 Timber, Milla, fixing or renewing in posts and frames. per .5 Cu.ft
H112 Timber (Group 4,Category A), (excluding Milla) supplying and fixing
new or renewing in partitions and frames, including panels and boards.
H113 Timber (Group 4,Category B) supplying and fixing new or renewing
in partitions and frames, including panels and boards.
H114 Timber (Group 4,Category A) supplying and fixing new or renewing
in, other carpentry work.
H115 Timber (Group 4,Category B) supplying and fixing new or renewing
in, other carpentry work.

This BSR is for Maintenance works only

S07- 53

Item
Unit

BSR Rate
2016

L.ft
L.ft

21
6

Sqr

46,006

Sqr

28,935

Sqr

55,998

Sqr

38,430

sq.ft

936

sq.ft

977

sq.ft

50

L.ft

203

L.ft

287

Cu.ft

1,160

Cu.ft
Cu.ft

741
8,287

Cu.ft

6,851

Cu.ft

3,997

Cu.ft

5,948

Cu.ft

3,093

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

H116
H117
H118
H119
H120
H121
H122
H123

H124

Description

Trellis
Trellis laths 1/2" x 1/2" renewing in (Group 2,Category A) local
timber, in quantities (Over 100 L.ft)
Trellis laths 1/2" x 1/2" renewing in (Group 2,Category A) local
timber, in quantities ( Up to 100 L.ft)
Trellis laths 1" x 1/2" renewing in (Group 2,Category A) local timber,
in quantities over 100 L.ft:
Trellis laths 1" x 1/2" renewing in (Group 2,Category A) local timber,
in small quantities up to 100 L.ft:
Trellis laths 1" x 1" supplying and fixing.
Trellis latches 2" x 1/2" in (Group 2,Category A)timber, renewing.
Trellis partition with 1/2" x 1/2" laths fixing 2" apart diagonally,
horizontally or vertically, on 4" x 2" milla timber framing.
Trellis screens with laths 1 3/4" x 3/8" at 1 1/4" distance apart
vertically and horizontally in Milla timber frames 1 1/2" x 2
1/2"supplying fixing to walls complete.
Trellis screens with laths 1" x 3/8" at 1 1/4" distance apart vertically
and horizontally on Milla frames 3" x 1" supplying and fixing to walls
complete.

This BSR is for Maintenance works only

S07- 54

Item
Unit

BSR Rate
2016

L.ft

21

L.ft

22

L.ft

22

L.ft
L.ft
L.ft

28
35
38

sq.ft

956

sq.ft

647

sq.ft

1,004

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

J001
J002
J003
J004
J005
J006
J007
J008

Description

J-IRONMONGER
Bolts and Nuts, Iron
Bolts and Nuts, iron 1 3/4" x 1/4" with washers fixing complete.
Bolts and Nuts, iron 2 1/2" x 3/8" with washers fixing complete.
Bolts and Nuts, iron 5" x 3/8" with washers supplying and fixing
complete.
Bolts and Nuts, iron 9" x 3/8" with washers supplying and fixing
complete.
Bolts and Nuts, iron 5" x 1/2" with washers supplying and fixing
complete.
Bolts and Nuts, iron 6" x 1/2" with washers supplying and fixing
complete.
Bolts and Nuts, iron 12" x 5/8" with washers fixing complete.
Bolts tower, 3" Iron, heavy quality supplying and fixing with Iron screws.

Item
Unit

BSR Rate
2016

Nos
Nos

67
80

Nos

121

Nos

209

Nos

121

Nos
Nos

127
209

Nos

259

Nos

297

Nos

344

Nos

382

Nos

1,633

Nos

849

sq.ft

110

sq.ft

335

sq.ft

317

set
set
set
set
set

51
53
95
146
152

J009 Bolts tower, 4" Iron, heavy quality supplying and fixing with Iron screws.
J010 Bolts tower, 5" Iron, heavy quality supplying and fixing with Iron screws.
J011 Bolts tower, 6" Iron, heavy quality supplying and fixing with Iron screws.
J012 Bolts tower, 2ft 9" Iron, heavy quality supplying and fixing with Iron
screws.
Iron Brackets
J013 Brackets with 1 1/2" x 1/4" flat iron 3ft 6" long (approx.) fish tailed at
ends, supplying and fixing to walls and walls made good.
Weld mesh
J014 2"x2" Weld mesh No.12, supplying and fixing to existing frames with
staples (fillets and beadings to be paid for separately)
J015 2"x2" Weld mesh No.10 supplying and fixing to window frames with
2" x 1/2" (Group 2) timber beadings, and painting weld mesh with 2
coats anti-corrosive paint, and beadings with primer, undercoat and 2
coats enamel paint to approved colour. Rate to include for making
openings for bolts, casement stays etc.
J016 2"x2" Weld mesh No.12 supplying and fixing to window frames with
2" x 1/2" (Group 2) timber beading, and painting weld mesh with 2
coats anti-corrosive paint, and beadings with primer, undercoat and 2
coats enamel paint to approved tint Rate to include for making
openings for bolts, casement stays etc.
Cabin Hooks
J017 Cabin Hooks and eyes, 2" Iron, supplying and fixing.
J018 Cabin Hooks and eyes, 3" Iron, supplying and fixing.
J019 Cabin Hooks and eyes, 6" Iron, supplying and fixing.
J020 Cabin Hooks and eyes, 8" Iron, supplying and fixing.
J021 Cabin Hooks and eyes, 9" Iron, supplying and fixing.

This BSR is for Maintenance works only

S07- 55

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

J022
J023
J024
J025
J026
J027
J028
J029
J030

J031

J032

J033

J034
J035
J036

J037
J038
J039
J040
J041
J042

Description

Casement Stays
Casement Stays, Iron 10" heavy quality, supplying and fixing.
Casement Stays, Iron 12" heavy quality, supplying and fixing.
Chimney
Chimney flue pipe available, fixing only.
Chimney flue pipe 6" dia. making and fixing with G.I sheets 22
B.W.G.
Chimney flue pipe 8"-12" dia making and fixing with G.I sheets 22
B.W.G (Sheets to be supplied by Department)
Cowel G.I 24 B.W.G making and fixing for 6" - 9" flue pipes.
Cowel G.I available, fixing complete for 6" -9" dia. flue pipes.
Expanded metal No.8" B.R.C Fabric supplying and laying as
reinforcement in floor and foundation.
Expanded metal, zinc sheet, wire gauge etc. fixing with iron screws to
existing frames with fillets or beadings ,fillets or beadings to be paid
for separately, and expanded metal, zinc sheet, or wire gauge
(available at site / supplied by the client).
Fly proofing, perforated zinc, 1/16" mesh, supplying and fixing to
existing frames (fillets to be paid for separately)
Gate, Iron
Gate, iron, with 1 1/2" x 1 1/2" x 1/4" angle iron framework including
bracing and horizontal centre member, with 5/8" dia. M.S bars at 6"
centers complete with strap hinges, hasp and staples.
Gutter Hooks
Gutter Hooks or brackets 3/4" x 1/8" supplying and fixing complete
with Iron screws.
Hasp and staple
Hasp and staple 4" iron, safety type of approved heavy quality,
supplying and fixing with iron screws.
Hasp and staple 6" iron, safety type of approved heavy quality,
supplying and fixing with iron screws complete.
Hasp and staple 12" x 2" iron, specially made out of 1/4" iron plate
and fixing with 1/4" x 2" bolts and nuts complete.
Hinges (Iron)
Hinges, butt, 2" iron of approved heavy quality supplying and fixing
with iron screws.
Hinges, butt, 3" iron of approved quality supplying and fixing with
iron screws.
Hinges, butt, 4" iron of approved quality supplying and fixing with
iron screws.
Hinges, butt, 5" iron of approved quality supplying and fixing with
iron screws.
Hinges supplied by Dept. fixing complete with screws.
Hinges, strap iron 1 1/2" x 1/4" x 1ft 0" long supplying & fixing with
necessary bolts and nuts (excluding pintols)

This BSR is for Maintenance works only

S07- 56

Item
Unit

BSR Rate
2016

Nos
Nos

259
291

L.ft

108

L.ft

519

L.ft
Nos
Nos

325
2,427
515

sq.ft

173

sq.ft

56

sq.ft

259

sq.ft

1,150

Nos

248

Nos

246

Nos

260

Nos

2,216

pairs

472

pairs

510

pairs

609

pairs
pairs

715
250

Nos

1,039

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

J043 Hinges, strap iron 2" x 1/4" 3ft 0" long supplying and fixing with
necessary bolts and nuts (excluding pintols)
J044 Hinges, double strap, 2 1/2" x 3/8" x 3ft 6" flat iron bent to shape and
fixing complete with bolts and nuts as per plan 23097
J045 Hinges, double strap, 2 1/2" x 3/8" x 5ft 6" flat iron bent to shape and
fixing complete with bolts and nuts as per plan 23097
J046 Hinges T 6" Iron, heavy quality supplying and fixing with iron screws
complete.
J047 Hinges, T 7" Iron, heavy quality supplying and fixing with iron screws
complete.
J048 Hinges, T 8" Iron, heavy quality supplying and fixing with iron screws
complete.
J049 Hinges, T 10" Iron, heavy quality supplying and fixing with iron
screws complete.
J050 Hinges, T 12" Iron, heavy quality supplying and fixing with iron
screws complete.
J051 Hinges, T 14" Iron, heavy quality supplying and fixing with iron
screws complete.
J052 Hinges, spring, Japanese Helical, door supplying and fixing with iron
screws complete.
Hinges (Stainless Steel) for Timber Doors
J053 Supplying and fixing UNION Butt Hinges, , 102x76x 3mm (thick)
2BB stainless steel, for wooden doors with brass screws.
J054 Supplying and fixing UNION Butt Hinges, , 102x76x 2mm (thick)
2BB stainless steel, for wooden doors with brass screws.
Holdfast
J055 Holdfast 1/8" x 2" x 9" flat iron supplying and fixing complete. per
No.
J056 Iron rods supplying by the client, cut to correct lengths, inserted in
window frames and painted with 2 coats anti-corrosive paint.
Locks (iron)
Note: Refer Item numbers From K039 to K058 for (Brass /
Quality) Locks
J057 Keys, Iron for door locks making and supplying.
J058 Keys, Iron for cupboards, making and supplying.
J059 Locks, available, fixing with screws.
J060 Locks, repairing and re-fixing.
J061 Locks, rim, 4" iron, superior quality, heavy type supplying and fixing
with iron screws complete.
J062 Locks, rim, 6" iron, superior quality, heavy type supplying and fixing
with iron screws complete.
J063 Locks, Motice, 4" iron, superior quality, heavy type supplying and
fixing with iron screws complete.
J064 Locks, Motice, 6" iron, superior quality, heavy type supplying and
fixing with iron screws complete.
This BSR is for Maintenance works only

S07- 57

Item
Unit

BSR Rate
2016

Nos

1,895

Nos

2,907

Nos

4,040

pairs

677

pairs

702

pairs

728

pairs

875

pairs

901

pairs

951

Nos

1,140

pairs

4,364

pairs

3,636

Nos

492

Nos

121

Nos
Nos
Nos
Nos

429
346
311
485

Nos

1,032

Nos

1,318

Nos

1,310

Nos

1,544

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

J065 Locks, Bird type supplying and fixing with iron screws complete.
Prime Cost of, Bird night latch lock (china)=Rs.850

J066

J067
J068
J069
J070

Mild steel rods


Mild steel rods in reinforcing lintols, beams, columns and slabs,
bending to shape, laying in position and tying with G.I wire as
directed.
Mild steel rods in foundation bending to shape, laying in position and
tying with G.I wire as directed.
M.S rods available., bending to shape, tying with G.I wire and laying
in position as directed in reinforcing lintols beams and floors.
M.S rods available, bending to shape, tying with G.I wire and laying in
position as directed reinforcing foundations.
M.S bars 5/8" dia. supplying and fixing in window frames at 4"
centers and painted with two coats Aluminium or anti- corrosive paint.

Item
Unit

BSR Rate
2016

Nos

1,390

100199

cwt

11,799

cwt

11,259

cwt

2,299

cwt

1,759

L.ft

113

L.ft

153

Nos

1,292

Nos

266

sq.ft

168

sq.ft

57

sq.ft

323

sq.ft

252

sq.ft

326

cwt

11,809

cwt

11,269

J071 M.S bars 3/4" dia. supplying and fixing in window frames at 4"
centers and painted with two coats Aluminium or anti- corrosive paint.
J072 Pintols for gates and garage doors supplying and fixing in cement
concrete (concrete to be paid for separately)
J073 Rag Bolts 4" x 5/8" with nuts and washers supplying and fixing
complete.
J074 Sheets, G.I plain, 24 B..W.G with hooked joints supplying and fixing
to existing frames with wire nails.
Wire mesh
J075 Wire netting, hexagonal mesh 1/2" supplying and fixing (beading to be
paid for separately)
J076 Wire mesh 1/2" galvanized, supplying and fixing with available fillets,
including removing existing.
J077 Wire mesh 1/4" galvanized, supplying and fixing with available fillets,
including removing existing.
J078 Wire mesh 1/16" galvanized, supplying and fixing with available fillets
including removing existing.
Reinforcement, with Tor steel rods
J079 Tor steel rods in reinforcing lintols, beams, columns and slabs bending
to shape, laying in position and tying with G.I wire as directed.
J080 Tor steel rods in foundation or Floors, bending to shape, laying in
position and tying with G.I wire as directed.

This BSR is for Maintenance works only

S07- 58

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

J081

J082

J083

J084

J085

J086

Description

Chain-link fencing
Note: Refer Item numbers From S011 to S024 for Barbed wire
fencing
Supplying and fixing 2"dia. heavy duty GI pipe uprights for receiving
chain-link fence. Rate to include for painting one coat of anticorrosive
and two coats of enamel paint and welding 6"x6"x1/4" thick MS plate
to bottom of pipe and fixing fiberglass pipe cap 2" dia.(Rate exclude
cement concrete base & Excavation.)
Supplying and fixing, open area 2"x2", 5' 0"ft. high (gauge 10)
galvanized and PVC coated Chain link fence . Fixed to existing GI
post and including horizontal bracing with 5/8"x 1/4" MS flat iron
with GI J bolts and washers , PVC coated tying wires etc.,
Supplying and fixing, open area 2"x2", 5' 0"ft. high (gauge 12
galvanized and PVC coated Chain link fence . Fixed to existing GI
post and including horizontal bracing with 5/8"x 1/4" MS flat iron
with GI J bolts and washers , PVC coated tying wires etc.,
Supplying and welding 11/2"x11/2"x1/4"MS angle iron horizontal
bracing to existing GI pipe posts. Rate to include for painting one coat
of anticorrosive paint and two coats of enamel paint.
Mild Steel Grill work
Fabricating and fixing of MS grills with 1"x1/4" flat iron frame and
1/4"dia.MS. rods welded to diamond shape 3"centres both ways.
Guard rails ( Heavy duty GI-Pipe)
Fabricating and fixing of 3' 0" high, heavy duty GI. Pipe Guard railing,
consisting of 1"dia.Vertical pipe (Balusters) raised at 6" intervals &
firmly fixed to Concrete floor at bottom & welded to 2"dia.heavy
duty Horizontal GI. pipe top rail. Two rows of 1" dia. heavy duty GI
pipe bracings welded to Vertical pipes horizontally at mid way.(
painting Paid Separately)Considered 20' 0" long hand rail

Hand rails ( Heavy duty GI-Pipe)


J087 Fabricating and fixing of 3' 0" high, heavy duty GI. Pipe Hand railing,
consisting of " dia. uprights at 12" centers. 1/4" thick 2"x2" M.S
plate welded to the bottom end of uprights and embedded in concrete
floor. The top end of the upright welded to 1"dia.G.I hand rail.
Considered 11' 2" long hand rail
Hand rails (Stainless Steel, 1.5mm thick Pipe- Grade 304 )
J088 Fabricating and fixing of 3' 0" high, stainless steel railing, consisting of
" dia 1.5mm Thick stainless steel (Pipe) uprights at 12" centers. 1/4"
thick 2"x2" M.S plate welded to the bottom end of uprights and
embedded in concrete floor, covered with stainless steel base cap. The
top end of the upright welded to Stainless Steel Pipes,1"dia.x
1.5mm Thick , hand rail (All stainless steel members are in Grade
304). Considered 11' 2" long hand rail

This BSR is for Maintenance works only

S07- 59

Item
Unit

BSR Rate
2016

L.ft

840

sq.ft

153

sq.ft

118

L.ft

286

sq.ft

438

L.ft

1,775

L.ft

1,600

L.ft

2,647

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Web Truss - (Angle between 150 - 450)


J089 Fabricating & Fixing Steel web Truss , Span less than 8m consist of
top chord, bottom chord & bracings. Including all , gusset plates ,
cleats , rivets , nuts, washers, rag bolts, separators etc.. (Rate shall
include for painting of two coats of anticorrosive paint & one coat of
enamel paint.) (Hoisting charges paid separately)

This BSR is for Maintenance works only

S07- 60

Item
Unit

BSR Rate
2016

Kg

388

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

K001

K002
K003
K004
K005
K006
K007
K008
K009
K010
K011
K012
K013
K014
K015
K016
K017

K018
K019
K020
K021
K022

K023

Description

K-BRASS FOUNDER
Bolts, Casement fasteners or stays, removing and re-fixing including
making good to holes in frames and sashes.
Bolts, barrel, brass
Bolts, barrel, brass, polished, 2 1/2" heavy quality supplying and fixing
with brass screws.
Bolts, barrel, brass, polished, 3" heavy quality supplying and fixing
with brass screws.
Bolts, barrel, brass, polished, 4" heavy quality supplying and fixing
with brass screws.
Bolts, barrel, brass, polished, 5" heavy quality supplying and fixing
with brass screws.
Bolts, barrel, brass, polished, 6" heavy quality supplying and fixing
with brass screws.
Bolts, brass, skeleton 8" supplying & fixing with brass screws.
Bolts, brass, skeleton 10" supplying & fixing with brass screws.
Bolts, brass, skeleton 12" supplying & fixing with brass screws.
Bolts, brass, skeleton 14" supplying & fixing with brass screws.
Cabin Hooks (Brass)
Cabin Hooks 2" polished, brass, heavy quality supplying and fixing
with brass screws.
Cabin Hooks 3" polished, brass, heavy quality supplying and fixing
with brass screws.
Cabin Hooks 6" polished, brass, heavy quality supplying and fixing
with brass screws.
Cabin Hooks, 8", polished, brass heavy Quality supplying & fixing
with brass screws.
Cabin Hooks, 9", polished, brass heavy quality supplying & fixing with
brass screws.
Cabin Hooks, 10", polished, brass heavy quality supplying & fixing
with brass screws.
Cabin Hooks, 12", polished, brass heavy quality supplying & fixing
with brass screws.
Casement fasteners, brass
Casement fasteners, brass with Motice plate, polished heavy quality
supplying and fixing with brass screws.
Casement stays, polished 10" heavy quality supplying and fixing.
Casement stays, polished 12" heavy quality supplying and fixing.
Fanlight Catches, brass heavy quality, supplying and fixing with brass
screws complete.
Handles, door, brass, polished heavy quality supplying and fixing with
brass screws complete.
Hasp and staple, brass
Hasp and staple, Safety type, 6" brass, polished heavy quality
supplying and fixing with brass screws, complete.

This BSR is for Maintenance works only

S07- 61

Item
Unit

BSR Rate
2016

Nos

76

Nos

335

Nos

452

Nos

538

Nos

611

Nos
Nos
Nos
Nos
Nos

617
392
430
468
548

Nos

291

Nos

316

Nos

367

Nos

430

Nos

468

Nos

494

Nos

519

Nos
Nos
Nos

411
373
398

Nos

284

Nos

539

Nos

329

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

K024 Hasp and staple, Safety type, 4" brass, polished heavy quality
supplying and fixing with brass screws, complete.
K025 Hat Hooks, brass, supplying and fixing with brass screws.
Hinges, brass
K026 Hinges, butt, 2" brass, polished heavy quality supplying and fixing with
brass screws complete.
K027 Hinges, butt, 3" brass polished heavy quality supplying and fixing with
brass screws complete.
K028 Hinges, butt, 3 1/2" brass polished heavy quality supplying and fixing
with brass screws complete.
K029 Hinges, butt, 4" brass polished heavy quality supplying and fixing with
brass screws complete.
K030 Hinges, butt, 5" brass polished heavy quality supplying and fixing with
brass screws complete.
K031 Hinges centre pivoted (consisting of 2 pieces) brass, polished heavy
quality supplying and fixing with brass screws complete.
K032 Hinges, gravity, brass supplying and fixing with brass screws
complete.
K033 Hinges, Parliamentary, 4" brass, polished heavy quality supplying and
fixing with brass screws complete.
K034 Hinges, Parliamentary, 5" brass, polished heavy quality supplying and
fixing with brass screws complete.
K035 Hinges, Parliamentary, 6" brass, polished heavy quality supplying and
fixing with brass screws complete.
K036 Hinges, Spring, available, repairing and re-fixing.
K037 Hinges, spring, double acting, brass 4" supplying and fixing.
K038 fixing Hinges, available complete with brass screws.
Locks (Brass)
Note: Refer Item numbers From J057 to J065 for Iron Locks.&
Item numbers From U743 to upward for Aluminium Door Locks.
K039 Keys, brass for door locks, making and supplying.
K040 Knobs for door locks, polished brass, heavy quality, renewing with
brass screws.
K041 Locks, door, available, fixing with screws.
K042 Locks, door repairing and re-fixing.
K043 Locks, cupboards, 2 1/2" brass, 4 levers with brass screws supplying
and fixing complete.
K044 Locks, cupboard, repairing and re-fixing.
K045 Locks, rim 6" polished brass, 2 levers, superior quality and English
make, supplying and fixing.
K046 Locks, rim 5" single lever of best quality local manufacture, supplying
and fixing.
K047 Supplying and fixing ,night latch/Rim Lock (Duplicate/Local), with
duplicate keys.
This BSR is for Maintenance works only

S07- 62

Item
Unit

BSR Rate
2016

Nos
Nos

297
259

pairs

669

pairs

923

pairs

1,369

pairs

1,381

pairs

1,470

pairs

595

pairs

875

pairs

1,369

Nos

742

Nos
Nos
Nos
Nos

815
523
1,833
797

Nos

505

set
Nos
Nos

336
333
520

Nos
Nos

385
318

Nos

1,318

Nos

1,159

Nos

1,615

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

K048 Supplying and fixing , Yale or Union, night latch Lock (Rim Lock),
with duplicate keys. (Nos: 80 or 89),(Imported, British or south
African make)

Item
Unit

BSR Rate
2016

Nos

8,231

Prime Cost of, Lock, Yale night latch,(Imported,British or south African make)=Rs.6159
100207

K049 Supplying and fixing Union, night latch Lock (Rim Lock), with
duplicate keys. (Nos: 1022,1027 or 1028),(Imported, British or south
African make)

Nos

10,992

Prime Cost of, Lock, Union, night latch,(Imported,British or south African make)=Rs.8333
100221

K050 Door rings, brass 1 3/4" to 1 1/2" supplying and fixing to doors and
windows with brass screws.
Prime Cost of, Door rings, brass 1" =Rs.160

Nos

283

100258

K051 Supplying & fixing Motice (local) single Lock.


100208

Nos

3,144

100208

K052 Supplying and fixing Motice Lock (local) double.


Prime Cost of, Lock Mortice (local) double, =Rs.2300

Nos
100209

K053 Supplying and fixing two Lever single door UNION Motice Lock
(No2295),(Imported, British or south African make).

Nos

Prime Cost of, Lock, Mortice Union (No2295),(Imported,Original) single =Rs.2439

100210

K054 Supplying and fixing two Lever double door UNION Motice Lock
(No2242), (Imported, British or south African make).
Prime Cost of, Lock, Mortice Union (No2242),(Imported,Original) Double =Rs.4956

4,128

Nos

3,701

7,501

100211

K055 Supplying and fixing UNION Cylinder Lock (No: PC 064 SC)
including Door handle pair,(Imported, British or south African make).
Nos
Prime Cost of, UNION Cylindrical Motice Lock (No:X985),(Imported,British or south
Africa)=Rs.1853

K056 Supplying and fixing UNION Nob set Lock (No:X96300) (Imported,
British or south African make).
Prime Cost of, UNION Nob set Lock for a Door (No:X96300) (Imported,British or south
African make). =Rs.4055

K057 Supplying and fixing UNION Nob set Lock for Toilets (No:X96350)
(Imported, British or south African make).
Prime Cost of, Supplying and fixing UNION Nob set Lock for Toilet door (No:X96350)
(Imported,British or south African make). =Rs.4115

4,926

100214

Nos

5,754

100217

Nos

5,830

100218

K058 Supplying and fixing RANIYO-PADMA Handle - Black (On Plate)


Nos
Prime Cost of, RANIYO-PADMA Handle - Black (On Plate)=Rs.1720

This BSR is for Maintenance works only

S07- 63

100220

2,788

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

L001
L002
L003
L004
L005
L006
L007
L008

L009

L010

L011
L012
L013
L014
L015
L016
L017
L018
L019
L020
L021
L022
L023
L024

Description

L-PLASTERER
Plastering (walls)
(5/8") thick plastering to wall in cement lime and sand 1:1:5 finished
semi rough with wooden float.
(5/8") thick plastering to wall in cement lime and sand 1:1:5 finished
smooth with lime putty floating.
(5/8") thick plastering 1:5 cement and sand semi rough
Plastering (beams, slab soffits)
3/8" thick plastering to R.C.C. beams, slab soffit in cement and sand
1:3 including floating with lime putty.
Clay plastering and lime puttying smooth.
Cove moulding 2 1/2" x 2 1/2" in cement mortar 1:2 built in existing
wall.
Repairing cracks in wall, plastered in cement mortar 1:3 after
chipping 2" to 4" wide.
Cresting with broken glass in cement mortar 1:4 on coping of
boundary wall.
Moulding
Moulding 3" x 1/2" in walls in lime and cement mortar 1:1:4 only for
replacements to match existing or to be "extra" over rate for
plastering.
Moulding 6" x 1" in walls in lime and cement mortar 1:1:4 only for
replacements to match existing or to be "extra" over rate for
plastering.
Moulding 4" x 2" in cement and sand 1:2 built in existing wall.
Flashing or plaster bands laid over tiles 4" to 6" wide on roof in
cement and lime mortar 1:1:4.
Letters embossed in plaster 3/4" thick up to 6" high in cement and
sand 1:2 cement floated and painted complete.
( 5/8") thick plastering to walls in lime and sand 2:5 including
floating, finished smooth with lime putty.
Pointing flush in cement 1:2 in surface cracks including raking out
joints.
Pointing, tuck, projected in cement 1:2 on brick masonry etc.
Rendering Cement
Rendering, (1/2") thick, 1:2 cement and sand, above 1 square.
Rendering, (1/2") thick, 1:2 cement and sand, up to 1 square.
Rendering, (1/2") thick, 1:3 cement and sand, above 1 square.
Rendering, (1/2") thick, 1:3 cement and sand, up to 1 square.
Rendering, (3/4") thick, 1:2 cement and sand , above 1 square.
Rendering, (3/4") thick, 1:2 cement and sand ,up to 1 Square.
Rendering, (3/4") thick, 1:3 cement and sand , above 1 square.
Rendering, (3/4") thick, 1:3 cement and sand ,up to 1 square.

This BSR is for Maintenance works only

S07- 64

Item
Unit

BSR Rate
2016

Sqr

4,849

Sqr
Sqr

5,617
4,217

Sqr
Sqr

6,005
3,341

L.ft

71

L.ft

39

L.ft

89

L.ft

72

L.ft
L.ft

113
150

L.ft

53

Nos

249

Sqr

4,938

L.ft
sq.ft

31
81

Sqr
Sqr
Sqr
Sqr
Sqr
Sqr
Sqr
Sqr

3,870
4,086
3,391
3,607
5,021
5,392
4,612
4,835

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

L025
L026
L027

L028

L029
L030

L031

L032

L033
L034

Description

Cement floating coat.


Neat cement floating coat on already Layed rendering surface, finish
smooth with Mason trowel.
Coloured cement (Red or Black) floating coat on already Layed
rendering surface, finish smooth with Mason trowel.
Coloured cement (Brown or Green) floating coat on already Layed
rendering surface, finish smooth with Mason trowel.
Cement Rendering and smooth Coloured floating coat
Rendering (3/4") thick, 1:3 cement and sand and floating coat, using
Coloured (Red/Black) finished smooth with Mason trowel.
Rendering Cement with Pudlo
Rendering cement 3/4" 1:2 with Pudlo, 5 lbs. to 100 lbs., cement.
Skirting in cement mortar
Skirting in cement mortar 1:3, 1/2" x 4" projected or flushed with
wall, and finished with neat Cement smooth and including forming
groove.
Skirting in cement mortar 1:3, 1/2" x 4" projected or flushed with
wall, and finished with Red Cement floating, including forming
groove.
D.P.C- 3/4"
D.P.C- 3/4" thick in cement, sand 1:2 finished smooth with 2 coats of
hot tar.
Plastering (Reveals)
Plastering external reveals 4" wide finished rough.
Plastering internal reveals 4" wide finished smooth.

This BSR is for Maintenance works only

S07- 65

Item
Unit

BSR Rate
2016

Sqr

797

Sqr

1,308

Sqr

1,308

Sqr

6,142

Sqr

7,104

L.ft

93

L.ft

110

Sqr

8,507

L.ft
L.ft

109
130

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

M001
M002
M003
M004
M005

Description

M-TINKER
GI-Down pipes / Hold fasts
Making and fixing Down pipes 4" dia. Using G.I 22 B.W.G with
holdfasts or plugs fixed to walls in cement 1:3.
Making and fixing Down pipes 6" dia. Using G.I 22 B.W.G with
holdfasts or plugs fixing to walls in cement 1:3.
Making and fixing Down pipes, rectangular, using G.I 22 B.W.G. 4" x
3" with holdfasts or plugs fixing to walls in cement 1:3.
Making and fixing Down pipes 4" x 6", circular or Rectangular, with
holdfasts or plugs fixing to walls (G.I sheets available)
Extra over Items 1 - 4 in Two storeyed buildings.

Item
Unit

BSR Rate
2016

L.ft

375

L.ft

591

L.ft

576

L.ft

265

L.ft

88

L.ft

103

L.ft

18

L.ft

399

L.ft

190

L.ft

494

L.ft

448

L.ft

237

L.ft

559

L.ft

L.ft

11

L.ft

L.ft

13

Nos

1,188

M006 Extra over Items 1 - 4 in buildings of Three or more storeys.


M007 Down pipes, loose or new, fixing with holdfasts or plugs including
making good to walls (down pipes available; Plugs or holdfast to be
paid for separately.
G.I Flashing
M008 Flashing, G.I 22 B.W.G 1ft 6" wide, supplying and fixing with 6"
turning up along, and top edge tucking well into wall in cement and
lime mortar, including removal of old flashing.
M009 Flashing G.I refixing, including making good to walls in cement and
lime mortar.
Zn/Al-Flashing
M010 Flashing, 0.47mm thick, Hi Tensile Zn/Al , 1'-6" wide, supplying and
fixing with 0'-6" turning up along, and top edge tucking well into wall
and groove filled with silicon.
G.I semicircular Gutters
M011 Gutters, eaves 6" G.I semicircular 22 B.W.G making and fixing with
hooks or brackets and screws, and joints to be soldered complete.
M012 Gutters, eaves 6" G.I semicircular 22 B.W.G making and fixing with
hooks or brackets and screws, and joints to be soldered complete. (G.I
sheets available).
M013 Gutter, eaves 6" moulded, G.I 22 B.W.G making and fixing complete
including brackets.
M014 Gutters, eaves and down pipes, cleaning in Single Storeyed Buildings.
M015 Gutters, eaves and down pipes, cleaning in Two Storey Buildings.
M016 Gutters eaves. re-grading in Single Storeyed Buildings.
M017 Gutters eaves. re-grading in Two Storeyed Buildings.
M018 Gutters, existing, making opening to receive 4" to 6" down pipe,
attaching spigot piece, joints to be soldered and making good.
This BSR is for Maintenance works only

S07- 66

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

M019 Gutter heads, 10" x 10" x 2ft 0" making of G.I Sheets 22 B.W.G and
fixing.
M020 Gutter heads, 10" x 10" x 2ft 0" making of G.I Sheets 22 B.W.G and
fixing. (Sheets available)
M021 Making and fixing Gutter heads, 9" x 9" x 1ft 0" of G.I Sheets 22
B.W.G .
M022 Making and fixing Gutter heads, 9" x 9" x 1ft 0" of G.I Sheets 22
B.W.G . (Sheets available.)
M023 Gutter hooks or brackets 3/4" x 1/8" supplying and fixing complete
with Iron screws.
M024 Gutters, leaks repairing or joints to be soldered.
M025 Gutters, parapet, G.I 3ft 0" overall, 22 B.W.G renewing on existing
boards, joints to be soldered and laid complete.
M026 Renewing gutters, valley, 18 B.W.G 36" wide, on existing boards,
sheets to be tarred, joints to be soldered and cement, lime filleting
complete.
M027 Renewing gutters, valley, 18 B.W.G 36" wide, on existing boards,
sheets to be tarred, joints to be soldered and cement lime filleting
complete (G.I sheets available)
M028 Renewing swan Neck approx. 3ft 4" long 4" dia. 22 B.W.G .
M029

M030

M031

M032

M033

M034
M035

Making tank, Hot Water, 1ft 6" x 1ft 0" x 1ft 6" high with G.I
Sheets, 22 B.W.G riveting and soldering, supplying and fixing
(Connecting U pipe and tap to be paid for separately)
Gutters parapet - G.I 3ft 0" overall 22 B.W.G renewing including
timber 1" boarding, joints to be soldered and laid complete.
Valley gutter (G.I)
Gutters valley, 18 B.W.G 36" wide, renewing including timber 1"
thick boarding, sheet t be tarred, joints to be soldered and cement lime
filleting complete.
Zinc Aluminium Colour bonded valley gutter (0.47mm)
Supplying and fixing Zinc Aluminium sheet valley gutter (0.47mm)
thick ,width 914mm and fixing to roof with self trapping
screws.(Excluding timber boarding). Hi-tensile (Grade-550) Colour
Supplying and fixing Zinc Aluminium sheet valley gutter (0.47mm)
thick ,width 457mm and fixing to roof with self trapping
screws.(Excluding timber boarding) Hi-tensile (Grade-550) Colour
Zn/Alu high tensile down pipes
Supplying, fixing 0.47mm tk., Zn/Alu Hi-tensile (Grade-550) Colour
down pipe (914mm girth) with brackets.
Supplying, fixing 0.47mm tk., Zn/Alu Hi-tensile (Grade-550) Colour
down pipe (457mm girth) with brackets.

This BSR is for Maintenance works only

S07- 67

Item
Unit

BSR Rate
2016

Nos

5,176

Nos

3,310

Nos

3,995

Nos

2,342

Nos

286

Nos

397

L.ft

744

L.ft

723

L.ft

183

Nos

2,905

Nos

519

L.ft

2,423

L.ft

2,566

L.ft

587

L.ft

4,708

L.ft

529

L.ft

308

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Zn/Alu gutters
M036 Supplying, fixing 0.47mm tk., Alu gutters (914mm girth) with
brackets & specials. Hi-tensile (Grade-550) Colour
M037 Supplying, fixing 0.47mm tk., Alu gutters (457mm girth) with
brackets & specials.
Zn/Alu Down pipe Bends
M038 Supplying, fixing 0.47mm tk., Zn/Alu Hi-tensile (Grade-550) Colour.
Down pipe Bend (for 914mm girth gutter) with brackets & specials.

Item
Unit

BSR Rate
2016

L.ft

578

L.ft

335

Nos

1,201

Nos

910

M039 Supplying, fixing 0.47mm tk., Zn/Alu Hi-tensile (Grade-550) Colour.


Down pipe Bend (for 457mm girth gutter) with brackets & specials.

This BSR is for Maintenance works only

S07- 68

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

N001
N002
N003
N004
N005
N006

Description

N-GLAZER
Glass panes fixing with (Group 6 category A) timber beadings (Glass
available)
Glass panes 3 mm clear supplying and fixing with (Group 6) timber
beadings.
Glass panes 5 mm clear, supplying and fixing with (Group 6) timber
Beadings.
Glass panes 5 mm pinhead or obscure supplying and fixing with
(Group 6) timber beadings.
Glass panes 3 mm pinhead or obscure supplying and fixing with
(Group 6) timber beadings.
Paint removing from painted glass panes with Caustic Soda Solution
or other paint remover.

This BSR is for Maintenance works only

S07- 69

Item
Unit

BSR Rate
2016

sq.ft

154

sq.ft

233

sq.ft

297

sq.ft

292

sq.ft

239

sq.ft

34

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

P001

P002

P003

P004

P005

P006

P007

P008
P009
P010

P011
P012
P013

Description

P-PAINTER & DECORATOR


Scraping Walls
Walls, scraped to original plaster, sand papering and lime putting
cracks and defects, preparing surface for Distemper, snowcem, paint
or similar application.
Walls, scraping and removing soot and levelling internally in Kitchen
(extra over colour washing)
Surface preparation (Old work) for Painting (Scraping /Patching
/Smoothing)
Surface preparation, old work of Internal faces of walls, scraped to
original plaster, patching up cracks and defects, with Acrylic wall
putty, applying one coat of Acrylic wall Filler, sand papering and
preparation of surface for application of Emulsion or Enamel paint. (
Painting Paid Separately)
Surface preparation, old work of External faces of walls, scraped to
original plaster, patching up cracks and defects, with Acrylic wall
putty, sand papering and preparation of surface for application of
Weather Shield or Enamel paint. ( Painting Paid Separately)
Surface preparation, old work of External faces of walls, scraped to
original plaster, patching up cracks and defects, with Acrylic wall
putty, sand papering and preparation of surface for application of
Weather Shield or Enamel paint in Two Storied building.( Painting
Paid Separately)
Surface preparation, old work of External faces of walls, scraped to
original plaster, patching up cracks and defects, with Acrylic wall
putty, sand papering and preparation of surface for application of
Weather Shield or Enamel paint in more than Two Storied building. (
Painting Paid Separately)
Skim coat
Applying Skim Coat compound on walls or soffit two coats, finished
smooth with sand papering, and prepare for colour washing.
Cement washing to walls
Cement washing to walls of single storeyed buildings, 1 coat, patching
and preparing surface.
Cement washing to walls of single storeyed buildings, 2 coat, patching
and preparing surface.
Cement washing externally to walls of building with upper floors, 1
coat.
White or colour washing walls
White or colour washing walls of single storeyed buildings 1 coat,
including patching up and preparing surface.
White or colour washing walls of single storeyed buildings 2 coats,
including patching up and preparing surface.
White or Colour washing external walls of two storeyed buildings, 1
coat.

This BSR is for Maintenance works only

S07- 70

Item
Unit

BSR Rate
2016

Sqr

1,127

Sqr

239

Sqr

1,998

Sqr

1,441

Sqr

1,821

Sqr

2,148

Sq.ft

23

Sqr

272

Sqr

462

Sqr

345

Sqr

260

Sqr

457

Sqr

310

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

P014 White or Colour washing external walls in buildings, of more than 2


storeys, 1 coat.
P015 White or Colour washing external walls in Two storeyed buildings, 2
coats.
P016 White or Colour washing external walls in building with more than 2
storeys, 2 coats.
Snowcem paint
P017 Painting walls with snowcem or equivalent cement paint, 2 coats to
new work.
P018 Painting walls with snowcem or equivalent cement paint, 2 coats to
old walls after scraping existing colour wash, sand papering and
wiping down.
P019 Painting walls with snowcem or equivalent cement on old walls after
scraping existing colour wash, sand papering and wiping down one
coat.
Acrylic wall Filler ( Primer for Interior)
P020 Painting walls with Acrylic wall Filler. (CIC or Equivalent.)
Alkali resisting primer
P021 Alkali resisting primer has good adhesion properties to the substrate.
specially recommended the walls need to paint before curing or less
than 2 weeks after plastering. (CIC, Causeway or Equivalent.)
Elastometic (Crack Bridging) filler Primer
Applying
Elastometic (Crack Bridging) filler primer for adverse
P022
weather condition like high thermal variances in day and night to avoid
existing hair line cracks and prevents further cracks appearing. (Also
Elastomeric primer should control algae and fungus and rich with
good elongation & colour retention properties.) (CIC, Causeway or
Equivalent.)
Alkali resisting water Proofing sealer
P023 Painting walls with one coat of Alkali resisting water Proofing sealer
where necessary. (CIC or Equivalent.)
Heat Resistant paint
P024 Applying Heat Resistant paint, one coat to all exposed surfaces on
walls already prepared. (CIC or Equivalent.)
Silicone masonry water repellent paint
P025 Painting Walls with one coat of Silicone masonry water repellent
paint.
Bathroom paint
P026 Painting Walls with one coat of Bathroom paint. (CIC or Equivalent.)
Emulsion paint (Interior)
P027 Painting Walls with one coat of emulsion paint. (On New work or
already prepared old work). (CIC or Equivalent.)
P028 Painting on New walls with two coats of emulsion paint. (Primer coat
paid separately) (CIC or Equivalent.)
This BSR is for Maintenance works only

S07- 71

Item
Unit

BSR Rate
2016

Sqr

358

Sqr

545

Sqr

590

Sqr

2,900

Sqr

3,138

Sqr

1,825

Sqr

1,307

Sqr

1,748

Sqr

1,780

Sqr

2,134

Sqr

4,875

Sqr

1,317

Sqr

1,697

Sqr

1,555

Sqr

2,827

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

P029 Painting Walls with Emulsion paint, One coat including preparing
surface of old work. (CIC or Equivalent.)
P030 Painting Walls with Emulsion paint, Two coats including preparing
surface of old work. (CIC or Equivalent.)
Painting General Purpose weather shied ( Exterior)
P031 Painting external walls with One coat of weather shied paint.
(Excluding Primer Coat). (CIC or Equivalent.)
P032 Painting external walls with Two coats of weather shied paint.
(Excluding Primer Coat). (CIC or Equivalent.)
Painting on old work with General Purpose weather shied
(Exterior paint) , including surface preparation.
P033 Painting walls with weather shied paint One coat including wire
brushing and sand papering of old work. (CIC or Equivalent.)
P034 Painting walls with weather shied paint Two coat including wire
brushing and sand papering of old work. (CIC or Equivalent.)
Painting on New work with, Two Coats of Acrylic Emulsion
weather shied (Exterior paint), and One coat of Elastomeric filler
Primer (under Coat).
P035 Painting on New work, weather shied (Exterior paint) One Coat, with
One Primer under Coat. -(CIC or Equivalent.)
P036 Painting on New work, weather shied (Exterior paint) Two Coats ,
with One Primer under Coat. -(CIC or Equivalent.)
Acrylic Emulsion (Exterior paint)
P037 Painting external walls with Two coats of Acrylic Emulsion (Exterior
paint) paint resist against algae, fungus and scrubs. (On New work or
already prepared old work). -(CIC or Equivalent.)
Painting asbestos sheet roof
P038 Painting over the asbestos sheet roof with Two coats of roof shield
paint. (CIC or Equivalent.)
P039 Painting under side of asbestos roofing sheet with One coat of
emulsion paint (CIC or Equivalent.)
P040 Painting under side of asbestos roofing sheet with Two coats of
emulsion paint (CIC or Equivalent.)
P041 Painting under side of asbestos roofing sheet with One coat of primer
after preparing surface (CIC or Equivalent.)
Floor Painting
P042 Painting floors with One coat of quick drying Floor paint including
washing, cleaning and smoothing down the surface. (CIC or
Equivalent.)
P043 Painting floors with Two coats of quick drying Floor paint including
washing, cleaning and smoothing down the surface. (CIC or
Equivalent.)

This BSR is for Maintenance works only

S07- 72

Item
Unit

BSR Rate
2016

Sqr

1,846

Sqr

3,144

Sqr

2,022

Sqr

3,774

Sqr

2,378

Sqr

3,894

Sqr

3,068

Sqr

4,803

Sqr

3,778

Sqr

2,952

Sqr

1,935

Sqr

3,072

Sqr

2,909

Sqr

2,464

Sqr

4,777

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

P044

P045

P046
P047

P048

P049
P050

Description

Epoxy Floor Painting


Painting floors with One coat of Epoxy Floor Paint including
washing, cleaning and smoothing down the surface. (CIC or
Equivalent.)
Painting floors with Two coats of Epoxy Floor Paint including
washing, cleaning and smoothing down the surface. (CIC or
Equivalent.)
Anticorrosive paint
Painting steelwork, One coat with anticorrosive paint including
removing scale and wire brushing. (CIC or Equivalent.)
Painting steelwork, Two coats, with anticorrosive paint including
removing scale and wire brushing. (CIC or Equivalent.)
Painting on GI Surface
Painting new galvanized iron GI Adhesion Promoter One coat and
One coat of Dulux metal primer Zink chromate or duco oil primer or
equivalent including washing surface with water after manufactures
specification.
Aluminium paint
Aluminium paint, One coat on metal surfaces. (CIC or Equivalent.)
Aluminium paint, One coat, along 2" thick band. (CIC or Equivalent.)

P051 Aluminium paint, Two coats, along 2" thick band. (CIC or
Equivalent.)
Enamel paint
P052 Painting One coat of Enamel paint, including washing and cleaning
the surface. (CIC or Equivalent.)
P053 Painting Two coats of Enamel paint, including washing and cleaning
the surface. (CIC or Equivalent.)
Removal of Paint from timber.
P054 Paint removed entirely with blow lamp to bare timber.
P055 Painting G.I pipes 3/4" to 1/2" with approved paint, 2 coats.
Wood preservative
P056 Wood preservative, (clear) applied to woodwork one coat (old work)
(CIC or Equivalent.)
P057 Wood preservative, (clear) applied to woodwork two coats (New
work) (CIC or Equivalent.)
Enamel paint with Wood primer Under coat
P058 Painting new woodwork, with primer, undercoat and Two coats of
enamel paint. (CIC or Equivalent.)
P059 Painting new woodwork with approved primer, one coat. (CIC or
Equivalent.)
Polishing wood work with Wax
P060 Polishing Woodwork with Wax, including thoroughly sand papering
surface in new work only of permanent fixtures.

This BSR is for Maintenance works only

S07- 73

Item
Unit

BSR Rate
2016

Sqr

1,599

Sqr

5,384

Sqr

1,590

Sqr

2,943

Sqr

3,536

Sqr

1,420

L.ft

L.ft

16

Sqr

1,854

Sqr

3,460

Sqr
L.ft

1,636
18

Sqr

941

Sqr

1,749

Sqr

5,684

Sqr

1,322

Sqr

3,671

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

P061
P062

P063
P064
P065

P066
P067

P068
P069
P070
P071

P072
P073
P074
P075
P076

Description

Painting with Wood sheen


Painting with Wood sheen paint including washing cleaning and
smoothing down surface, One coat.
Painting with wood sheen paint including washing cleaning and
smoothing down surface, Two coats.
Polyurethane Varnishing
Varnishing on old wood surface with one coat of polyurethane
varnish-Gloss, after washing down and sand papering.
Varnishing on old wood surface with two coats of polyurethane
varnish-Gloss, after washing down and sand papering.
Varnishing on New wood work with one coat of sanding sealer and
two coats of polyurethane varnish-Gloss, after sand papering.
polyurethane varnish-Matt
Varnishing with polyurethane varnish-Matt, after washing down and
sand papering, Two coats.
Varnishing on New wood work with one coat of sanding sealer and
two coats of polyurethane varnish-Matt, after sand papering.
Removing Varnish
Varnishing, removing entirely to bare timber and preparing surface.
Painting with Sanding sealer / Woof finish Lacquer
Applying new woodwork with Two coats of Sanding sealer and two
coats of wood finish
Applying wood finish, one coat, including washing, cleaning and
smoothing down surface.
Applying wood finish, one coat, including two coats of sanding
sealer after washing, cleaning and smoothing down surface.
Painting with Perque varnish
Cutting, levelling ,polishing and applying two coats of Perque
varnish for an existing timber base floor.
Applying masonry sealer for walls One coat.
Painting Letters on (Board / Wall)
Lettering 1" to 1 1/2" painted in Sinhalese, English or Tamil, including
painting background.
Lettering 2" to 3" painted in Sinhalese, English or Tamil, including
painting background.
Lettering 4" to 5" painted in Sinhalese, English or Tamil, including
painting background.

This BSR is for Maintenance works only

S07- 74

Item
Unit

BSR Rate
2016

Sqr

1,861

Sqr

3,225

Sqr

2,288

Sqr

4,040

Sqr

5,779

Sqr

4,245

Sqr

5,983

Sqr

2,109

Sqr

6,387

Sqr

2,158

Sqr

6,112

Sq.ft
Sqr

100
1,873

Nos

46

Nos

191

Nos

106

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Nos

310

Nos

437

Nos

460

Nos
Nos

706
151

Nos

199

Nos

1,037

Nos

1,393

Nos

2,362

Nos
Nos

3,659
304

Nos

Deleted

Nos

5,727

Q-PLUMBER
Ball valve-UPVC
Q001 Supplying & fixing UPVC ball valve 1/2" dia. (S-Lon or equivalent)
Q002 Supplying & fixing UPVC ball valve 3/4" dia. (S-Lon or equivalent)
Q003 Supplying & fixing UPVC ball valve 1" dia.

(S-Lon or equivalent)

Q004 Supplying & fixing UPVC ball valve 1 1/4" dia. (S-Lon or
equivalent)
Q005 Fixing ball valve 1/2" to 1" (available.)
Ball valve-Brass
Q006 Repairing & fixing ball valve. removing and refixing
Q007 Supplying & fixing Brass Ball valve " or 20mm-(Peglar or
equivalent.)
Q008 Supplying & fixing Ball valve Brass " or 25mm-(Peglar or
equivalent.)
Q009 Supplying & fixing Ball valve Brass 1" or 32mm-(Peglar or
equivalent.)
Q010 Supplying & fixing Ball valve Brass 1" or 50mm -(Peglar or
equivalent.) with necessary fittings.
Q011 Soldering & fixing ball to lever operating Valve (available)
Concealed Taps/Valves-Chromium plated
Q012 Supply and fixing concealed valve 1/2"dia.
Q013 Supplying and fixing Concealed valve 1/2"dia.(American Standard or
Equivalent.)
Prime Cost of, Chromium plated Concealed valve (Amarican Standerd)=Rs.4450

Q014 Supplying & fixing Concealed Taps/Valves-Chromium plated "


dia.(Plumber)
Prime Cost of, Concealed Valve (plumber), "dia.=Rs.3500

Flush valve
Q015 Supplying and fixing cobra flush valve
Q016 Supplying and fixing wall Urinal Flush Valve(FM 3A903)-High
Quality
Prime Cost of, Urinal Flush Valve(Rocell)-High Qaulity=Rs.6385

Q017 Supplying and fixing wall Urinal Sensor Flush Valve(FM 3L303)-High
Quality
Prime Cost of, Urinal Sensor Flush Valve(Rocell)-High Qaulity=Rs.18351

Flush valve to existing Urinal (Imported )


Q018 Supplying and fixing wall Urinal Flush Valve(Cobra)-High Quality
Prime Cost of, Urinal Flush Valve(Cobra)-High Qaulity=Rs.16082

Q019 Supplying & fixing flush valve to existing Urinal (American Standard
or Equivalent.)
Prime Cost of, Flush valve to existing Urinal (American Standerd)=Rs.10017

This BSR is for Maintenance works only

S07- 75

80869

Nos

4,683

80868

Nos

Deleted

Nos

8,302

80068

Nos

1,126

80069

Nos

20,758

80066

Nos
80067

13,055

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Nos

1,243

Nos

2,072

Nos

2,977

Nos

3,755

Nos

4,263

Nos

6,235

Nos

8,775

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos
Nos
Nos

2,243
2,968
4,596

Nos

8,282

Gate valve brass for Max. 17.5 bars (Pegler 1065 or equivalent)
Q020 Supplying and fixing 3/8" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q021 Supplying and fixing 1/2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q022 Supplying and fixing 3/4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q023 Supplying and fixing 1" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q024 Supplying and fixing 1 1/4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q025 Supplying and fixing 1 1/2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q026 Supplying and fixing 2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Gate valve brass for Max. 20 bars (Pegler 1068 or equivalent)
Q027 Supplying and fixing 1/4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q028 Supplying and fixing 1/2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q029 Supplying and fixing 3/4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q030 Supplying and fixing 1" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q031 Supplying and fixing 1 1/4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q032 Supplying and fixing 1 1/2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q033 Supplying and fixing 2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q034 Supplying and fixing 2 1/2" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q035 Supplying and fixing 3" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Q036 Supplying and fixing 4" dia: gate valve brass imported (Pegler or
equivalent, approved quality).
Float valve (Pegler 855 or equivalent)
Q037 Supplying & fixing 1/2" dia. brass float valve with necessary fittings
Q038 Supplying & fixing 3/4" dia. brass float valve with necessary fittings
Q039 Supplying & fixing 1" dia. brass float valve with necessary fittings
Q040 Supplying & fixing 1 1/4" dia. brass float valve with necessary fittings
Prime Cost of, 1 1/4" dia. brass float value with 5" Plastic Ball=Rs.6311

This BSR is for Maintenance works only

S07- 76

80843

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Nos

18,001

Q041 Supplying & fixing 1 1/2" dia. brass float valve with necessary fittings
Prime Cost of, 1 1/2" dia. brass float value with 5" Plastic Ball=Rs.14002

Q042 Supplying & fixing 2" dia. brass float valve with necessary fittings
Prime Cost of, 2" dia. brass float value with 5" Plastic Ball=Rs.26897

Q043
Q044
Q045
Q046
Q047
Q048
Q049
Q050
Q051

Q052
Q053
Q054

Q055

Foot valve Brass


Supplying & fixing 1" dia. Copper foot valve with necessary fittings
Supplying & fixing 1 1/2" dia. Copper foot valve with necessary
fittings
Supplying & fixing 2" dia. Copper foot valve with necessary fittings
Foot valve PVC
Supplying & fixing 1" dia. PVC foot valve with necessary fittings (L/D
or equivalent)
Supplying & fixing 1 1/4" dia. PVC foot valve with necessary fittings
(L/D or equivalent)
Supplying & fixing 1 1/2" dia. PVC foot valve with necessary fittings
(L/D or equivalent)
Supplying & fixing 2" dia. PVC foot valve with necessary fittings (L/D
or equivalent)
Supplying & fixing 2 1/2" dia. PVC foot valve with necessary fittings
(L/D or equivalent)
Supplying & fixing 3" dia. PVC foot valve with necessary fittings (L/D
or equivalent)
Lavatory Basin
Fixing Lavatory Basin to wall, and connecting to existing water
service and making good. (Basin, brackets and fittings available).
Fixing Basin, Lavatory, existing brackets. (Tap, Waste trap and Basin
available).
Supplying & fixing complete Basin, Lavatory, 22" x 16" with waste
plug, new brackets, (tap, trap, and outlet pipe will be paid for
separately)
Supplying & fixing complete Basin, Lavatory, 22" x 16" with waste
plug, existing brackets, ( tap, trap, and outlet pipe will be paid for
separately).
Prime Cost of, Basin, Lavatory, 22" x 16" with waste plug, =Rs.3200

Q056 Supplying & fixing complete Basin, Lavatory, 25" x 18" with waste
plug, new brackets, ( tap, trap, and outlet pipe will be paid for
separately)
Prime Cost of, Basin, Lavatory, 25" x 18" with waste plug, new brackets, =Rs.3900

Q057 Supplying & fixing complete Basin, Lavatory, 25" x 18" with waste
plug, on existing brackets, ( tap, trap, and outlet pipe will be paid
for separately).
Prime Cost of, Basin, Lavatory, 25" x 18" with waste plug, =Rs.4100

This BSR is for Maintenance works only

S07- 77

80844

Nos

34,715

80845

Nos

2,588

Nos
Nos

4,334
5,255

Nos

1,153

Nos

1,432

Nos

1,661

Nos

1,813

Nos

2,144

Nos

2,588

Nos

3,094

Nos

1,217

Nos

7,028

Nos

5,281

80611

Nos

7,892

80612

Nos
80613

6,435

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q058
Q059

Q060
Q061
Q062
Q063
Q064
Q065
Q066
Q067
Q068
Q069
Q070

Q071
Q072

Description

Removing bath room Fittings


Removing basin, sink or urinal including all fittings, and making walls
good.
Baths, C.I enamel, removing and re-fixing in New position and
making good to walls and floors (Extra piping required will be paid for
separately)
Fixing bath, enamelled, C.I. any size, including trap, tap outlet, pipes
etc. complete (Bath and fittings available).
supplying and fixing bath, enamelled, 3" roll edge, C.I 5ft 6" including
trap, tap etc. (out-let pipes will be paid for separately)
Fixing bends, elbows, tees, crosses, G.I any size up to 2" (fittings
available)
Supplying and fixing bends, G.I 1/2".
Supplying and fixing bends, G.I 3/4".
Supplying and fixing bends, G.I 1".
Supplying and fixing bends, G.I 1 1/4".
Supplying and fixing bends, G.I 1 1/2".
Supplying and fixing bends, G.I 2".
Supplying and fixing bends, G.I 3".
Closet-pedestal type
Fixing closet, pedestal type, available at site with cement concrete
after breaking concrete floor, and making good and making
connections to soil and flush pipes.
Closet, pedestal type, disconnecting and plugging sewer connection
and making good all affected walls and floors.
Supplying & fixing ,pedestal closet (Indian make) ( seat and cover
available)
Prime Cost of, Pedestal closet (Indian make) ( seat and cover available) =Rs.7900

Q073 Supplying & fixing closet, pedestal type, approved quality with low
level glazed earthenware flushing cistern, flush pipe double plastic seat
cover, 1/2" stop cock, trap etc. (Indian make)
Plastic seat cover, imported
Q074 Supplying and fixing plastic seat cover, imported, approved quality.
Close coupled water closet suite (white) -Imported
Q075 Supplying & fixing, close coupled water closet suite, white, (4/2.6 Lit
) with water closet Pan, Cistern, Seat & Seat cover and trap etc.:
complete (Twyford- Refresh brand or equivalent approved quality).
Q076 Supplying & fixing, close coupled water closet suite, white, (4/2.6 Lit
) with water closet Pan, Cistern, Seat & Seat cover and trap etc.:
complete. (BECA-American standards or equivalent)
Prime Cost of, Close coupled water closet suite,white (BECCA-Amarican
standerds)=Rs.24543

This BSR is for Maintenance works only

S07- 78

Item
Unit

BSR Rate
2016

Nos

1,288

Nos

4,027

Nos

3,065

Nos

Deleted

Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos

119
398
462
601
919
1,046
1,319
3,286

Nos

2,322

Nos

1,693

Nos

12,355

80655

Nos

8,351

Nos

3,632

Nos

Deleted

Nos

33,831

80661

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Close coupled water closet suite (white)-Manufactured in Sri


Lanka.
Q077 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite (white / Colour) with wash down 6/3 liter
dual flushing. Has a horizontal outlet and cistern with water inlet from
bottom. Complete with Seat, Seat cover and concealed trap etc. .
(Make: Rocell , Model: URBAN-D or equivalent )
Prime Cost of, Close coupled water closet suite,white (Urban D-Rocell)=Rs.18246

Q078 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite(White/ Colour) with wash down 6/3 liter
dual flushing. Has a horizontal outlet and cistern with water inlet from
bottom. Complete with Seat, Seat cover and concealed trap etc. .
(Make: Rocell , Model: DUNE or equivalent )
Prime Cost of, Close coupled water closet suite,white (Dune-Rocell)=Rs.21793

Q079 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection.
Cistern with water inlet from bottom. Complete with Seat, Seat cover
and concealed trap etc. . (Make: Rocell , Model: INTENCE or
equivalent )
Prime Cost of, Close coupled water closet suite,white (Intence-Rocell)=Rs.34823

Q080 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection.
Cistern with water inlet from bottom. Complete with Seat, Seat cover
and concealed trap etc. . (Make: Rocell , Model: Elements Aquaor
equivalent )
Prime Cost of, Element aqua water closet with seat cover (Rocell)=Rs.29710

Q081 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection.
Cistern with water inlet from bottom. Complete with Seat, Seat cover
and concealed trap etc. . (Make: Rocell , Model: Aqua+ or equivalent
)
Prime Cost of, Aqua + water closet with seat cover (Rocell)=Rs.35442

Q082 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection.
Cistern with water inlet from bottom. Complete with Seat, Seat cover
and concealed trap etc. . (Make: Rocell , Model: Summer Blue or
equivalent )
Prime Cost of, Summer Blue closet with seat cover (Rocell)=Rs.79300

This BSR is for Maintenance works only

S07- 79

Item
Unit

BSR Rate
2016

Nos

25,834

80662

Nos

30,338

80663

Nos

46,886

80664

Nos

40,393

80666

Nos

47,672

80667

Nos
80668

103,372

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Item
Unit

BSR Rate
2016

Q083 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection. InWall Tank Cistern with water inlet from bottom. Complete with Seat,
Seat cover and concealed trap etc. . (Make: Rocell , Model: Eternity
Nos
or equivalent)

85,751

Description

Prime Cost of, Eternity water closet with seat cover (Rocell)=Rs.64150

80669

Q084 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection. InWall Tank Cistern with water inlet from bottom. Complete with Seat,
Seat cover and concealed trap etc. . (Make: Rocell , Model: Urbanity
Nos
or equivalent)
Prime Cost of, Urbanity water closet with seat cover (Rocell)=Rs.65514

Q085 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection. InWall Tank Cistern with water inlet from bottom. Complete with Seat,
Seat cover and concealed trap etc. . (Make: Rocell , Model: Escape or
Nos
equivalent)
Prime Cost of, Escape closet with seat cover (Rocell)=Rs.64969

Q086 Supplying & fixing, Vitreous china floor standing close coupled,
Water Closet (toilet) suite with wash down 6/3 liter dual flushing. Has
horizontal outlet and two lateral holes for bottom water connection.
Cistern with water inlet from bottom. Complete with Seat, Electric
Seat cover and concealed trap etc. . (Make: Rocell , Model:
Sensofresh or equivalent)
Prime Cost of, Sensofresh closet with Electric seat cover (Rocell)=Rs.140764

Close coupled water closet suite (colour)


Q087 Supplying and fixing closed couple water closet suit (Coloured) with
flushing cistern ,flush pipe, double plastic sheet cover ,stop cock, trap
etc.(Twyford or equivalent approved quality)
Prime Cost of, Low level Closet suit (Twyford) with seat cover-white=Rs.40947

Nos

181,431

80672

Nos

55,274

80659

Prime Cost of, Floor standing bidet (white colour),( 22" x 14") (Dune-Rocell)=Rs.11375
80726

S07- 80

86,791

80671

Close coupled European type low level commode suit (white )


Q088 Supplying and fixing close coupled European type low level commode
suit white colour with 9 liter capacity which vitreous China low level
Nos
cistern.(Twyford -Refresh brand)
Bidet, pedestal type-Imported
Nos
Q089 Deleted
Bidet, pedestal type, Manufactured in Sri Lanka.
Q090 Supplying & fixing Vitreous china floor standing bidet (white colour),
Nominal size ( 22" x 14 1/2") floor to Rim height 16", complete with
overflow hole, deck mounted single hole centre set bidet faucet. (DuneNos

This BSR is for Maintenance works only

87,483

80670

57,874
Deleted

15,438

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Nos

15,207

Q091 Supplying & fixing Vitreous china floor standing bidet (white colour),
Nominal size (22"x151/2") floor to Rim height 16 1/2", complete with
overflow hole, deck mounted single hole centre set bidet
Prime Cost of, Floor standing bidet (white colour),(22"x15") (Urband DRocell)=Rs.11193

Q092

Q093
Q094

Q095
Q096
Q097

Q098

Bath wear set (3-Pieces)-Fixing Only


Fixing pedestal wash basin pedestal low level cistern & bidet with
necessary specials & connecting to existing service line (Fittings are
available.)
Closet-squatting type
Supplying & fixing closet, squatting type, with trap. (Indian)
Removing Closet-squatting type
Removing closet, squatting type, plugging sewer connections and
floor made good.
Fixing available Closet-squatting type
Fixing in cement concrete closet, squatting type, fixed, including
breaking floor (closet available)
Fixing in cement concrete closet, squatting type, fixed including trap,
including breaking floor (closet and trap available)
Fixing closet, squatting type, including flushing cistern and pipes
complete. (Closet and all fittings available)
Squatting pan- European
Supplying and fixing foot rest squatting pan and trap white to
working order.(Twyford or equivalent approved quality)
Prime Cost of, Squtting Pan & Trap (White)-Europion typeTwyford or
equivalent=Rs.15924

Q099 Supplying and fixing foot rest type squatting pan and trap colour to
working order.(American standards or equivalent)
Prime Cost of, Squtting Pan & Trap -(American standerds)-S.No:100F=Rs.7905

Squatting pan Ceramic ( Indian)


Q100 Supplying & fixing squatting pan with foot rest Ceramic (Indian or
equivalent)
Prime Cost of, Squatting pan with foot rest Ceramic ( Indian ) =Rs.1700

Closet squatting type ( Indian or equivalent)


Q101 Supplying & fixing closet squatting type with trap complete with
cistern plastic flush pipe etc.: Indian or equivalent (approved quality).
Prime Cost of, Closet squatting type with foot rest -Indian =Rs.2800

Cistern high level (Plastic)- ( Indian or equivalent)


Q102 Supplying & fixing flushing cistern high level (Plastic).
Prime Cost of, Flushing Cistern high level (Plastic).Indian=Rs.3000

Cistern high level, ceramic-(Twyford or equivalent approved


quality)
Q103 Supplying and fixing ceramic high level cistern with fittings white
,complete.(Twyford or equivalent approved quality)
Prime Cost of, High level Cistern ceramic (Twyford)=Rs.15924

This BSR is for Maintenance works only

S07- 81

80727

Nos

5,637

Nos

4,954

Nos

2,017

Nos

2,232

Nos

2,771

Nos

4,828

Nos

23,213

80650

Nos

13,028

80651

Nos

3,681

80652

Nos

15,105

80657

Nos

4,167

80718

Nos
80721

21,329

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Cistern, high level, auto flush-Ceramic


Q104 Supplying & fixing high level ceramic automatic cistern
Prime Cost of, High level ceramic automatic cistern=Rs.7200

Cistern, high level, auto flush-Plastic


Q105 Supplying & fixing high level cistern plastic auto flush (2 gallons
capacity) complete with flush pipe, sprinkler pipe, necessary fittings
complete to working order.
Prime Cost of, High level Cistern plastic auto flush (2 gallons capacity) complete with
flush pipe, sprinkler pipe, necessary fittings =Rs.6400

Item
Unit

BSR Rate
2016

Nos

10,310

80720

Nos

9,294

80717

Cistern low level, flushing- porcelain (Indian , approved quality).


Q106 Supplying & fixing flushing cistern low level porcelain Coloured,
(Indian , approved quality).
Prime Cost of, Flushing cistern low level porcelain coloured (indian , approved
quality).=Rs.4800

Syphon
Q107 Supplying and fixing siphon for existing cistern (Indian)
Prime Cost of, Syphon System (Indian)=Rs.850

7,262

80719

Nos

1,210

80955

Q108 Supplying and fixing siphon for existing cistern (American Standard
or Equivalent.)
Prime Cost of, Syphon system (Amarican standerd)=Rs.1940

Magic Bend
Q109 Supplying and Magic bend 4" dia. For existing W.C. set etc.
Prime Cost of, Magic bend 4" dia. =Rs.1392

Nos

2,594

80956

Nos

2,038

80210

Urinal(Indian)
Q110 Supplying & fixing urinal, wall type.

Nos

Prime Cost of, Urinal wall type =Rs.1625

3,695

80698

Q111 Fixing available urinal, wall type.


Urinal Imported- Twyford
Q112 Supplying and fixing bowl urinal white.(Twyford or equivalent
approved quality)
Prime Cost of, Urinal wall type (white)-Europion(Twyford)=Rs.8645

Q113 Supplying and fixing bowl urinal colour.(Twyford or equivalent


approved quality)
Prime Cost of, Urinal wall type (Colour)-Europion(Twyford)=Rs.10200

Q114 Supplying and fixing (New wash brook ) urinal.(American standards


or equivalent)
Prime Cost of, New wash brook urinal.(American standerds)=Rs.31000

Q115 Supplying & fixing Wall urinal with brackets.(American standards


or equivalent)
Prime Cost of, Wall urinal with brackets.(American standerds)=Rs.10201

Urinal - Manufactured in Sri Lanka.


Q116 Supplying & fixing Wall urinal with Flush Valve.(Flo Point Urinal Rocell or equivalent)
Prime Cost of, Flo point urinal with F.V (Rocell)=Rs.27890

This BSR is for Maintenance works only

Nos

S07- 82

Nos

1,550

Nos

12,427

80699

Nos

14,402

80700

Nos

40,818

80702

Nos

13,289

80703

Nos
80704

35,754

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Item
Unit

BSR Rate
2016

Q117 Supplying & fixing Wall urinal with Flush Valve.(Dew Point Urinal Nos
Rocell or equivalent)

29,513

Description

Prime Cost of, Dew point urinal with F.V (Rocell)=Rs.22976

Q118 Supplying & fixing Wall urinal with Sensor.(Flo Point Urinal Rocell or equivalent)
Prime Cost of, Flo point urinal withSensor (Rocell)=Rs.46133

Q119 Supplying & fixing Wall urinal with Sensor.(Dew Point Urinal Rocell or equivalent)
Prime Cost of, Dew point urinal withSensor (Rocell)=Rs.37398

Sink and fittings-Fixing Only


Q120 Fixing sink, any size, complete with waste plug, trap & brackets (sink
and fittings available)
Sink
Q121 Supplying & fixing sink, glazed, earthenware 30" x20"x8" with waste
plug, brackets etc. complete.
Prime Cost of, Sink, glazed, earthenware 30" x20"x8" waste plug, chain=Rs.3650

Q122 Supplying & fixing sink, glazed, earthenware 30" x 18" x 8" with
waste plug, on existing supports.

80705

Nos

58,923

80706

Nos

47,829

80707

Nos

Nos

2,775

6,359

80760

Nos

5,525

Prime Cost of, Sink,glazed,earthenware 30" x 18" x 8" with waste plug, chain=Rs.3500
80761

Q123 Supplying & fixing sink, glazed earthenware 24" x 18" x 8" with waste
plug, brackets etc., complete.
Q124 Supplying & fixing sink, glazed, earthenware 24" x 18" x 8" with
waste plug, on existing supports.
Replacing Sink
Q125 Removing & refixing sink or basin, in new position.
Q126 Sink built in brick in cement 1:5 & cement rendered 1/2" (1:2), 2ft 0"
x 2ft 0" with 6" high curb including making hole in wall and supplying
& fixing 2" outlet pipe.
Stainless steel kitchen sink
Q127 Supplying & fixing approved quality, stainless steel kitchen sink with
single bowl & draining board with necessary waste plug, brackets etc.:
Prime Cost of, Stainless steel kitchen sink with single bowl & draining board with
necessary waste plug, brackets etc:=Rs.3000

Q128 Supplying & fixing approved quality, stainless steel kitchen sink with
double bowl & draining board with necessary waste plug, brackets
etc.:
Prime Cost of, Stainless steel kitchen sink with double bowl & draining board with
necessary waste plug, brackets etc:=Rs.10000

Q129 Supplying & fixing 800X510mm stainless steel kitchen sink with single
bowl & draining board with necessary waste plug, brackets etc.:
(Teka or Equivalent)
Prime Cost of, SS kitchen sink with single bowl teka=Rs.17795

This BSR is for Maintenance works only

S07- 83

Nos

6,041

Nos

5,398

Nos

4,017

Nos

3,342

Nos

4,358

80763

Nos

13,383

80764

Nos
80765

23,148

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q130 Supplying & fixing 1600X510mm stainless steel kitchen sink with
double bowl & draining board with necessary waste plug, brackets
etc.: (Teka or Equivalent)
Prime Cost of, SS kitchen sink with doubl bowl teka=Rs.36188

Item
Unit

BSR Rate
2016

Nos

46,642

80766

Wash Basin
Q131 Supplying & fixing wash Basin 22"x16" white pedestal type with pillar
tap, waste plug and other necessary fittings.(Indian approved quality)
Nos
Prime Cost of, Wash basin 22"x15" coloured with pedestal (Indian approved
quality)=Rs.6800

Q132 Supplying and fixing Wash Basin with pedestal


25"x18"white.(Twyford -Refresh Brand or equivalent)
Prime Cost of, Wash Basin white 25"x18"-Twyford or equi.=Rs.22000

Q133 supplying and fixing Lavatory wash basin with pedestal 20"x18"
(American Standerd-Kimera)
Prime Cost of, wash basin & pedastal (American Standerd)=Rs.21210

10,234

80614

Nos

29,168

80619

Nos

28,165

80620

Wash Basin (local Bath wear)


Q134 Supplying & fixing Vitreous China floor standing wash basin (white
colour) having nominal side of ( 23"x 18" ) with universal height
pedestal of floor to Rim height 33", over flow hole and single tap hole
in centre, including pedestal, Wash basin fixing kit. (Urband D-Rocell
or equivalent)
Nos
Prime Cost of, Wash basin (white colour), (23"x 18" ) with universal height pedestal
(Urband D-Rocell)=Rs.8190

Q135 Supplying & fixing Vitreous China floor standing wash basin (white
colour) having nominal side of (241/2"x 19") with universal height
pedestal of floor to Rim height 32 1/2", over flow hole and single tap
hole in centre, including pedestal, Wash basin fixing kit. (DuneRocell)
Prime Cost of, Wash basin( 24"x 19" ) with universal height pedestal (DuneRocell)=Rs.9919

Q136 Supplying & fixing Vitreous China floor standing wash basin (white
colour) having nominal side of (241/2"x 19") with universal height
pedestal of floor to Rim height 32 1/2", over flow hole and single tap
hole in centre, including pedestal, Wash basin fixing kit. (IntenseRocell or equivalent)
Prime Cost of, Wash basin (white), ( 24"x 19" ) with universal height pedestal (IntenseRocell)=Rs.19291

Q137 Supplying & fixing Vitreous China floor standing wash basin (white
colour) having nominal side of (241/2"x 19") with universal height
pedestal of floor to Rim height 32 1/2", over flow hole and single tap
hole in centre, including pedestal, Wash basin fixing kit. (Elements
Aqua-Rocell or equivalent)
Prime Cost of, Element aqua wash basin with pedestal (Rocell)=Rs.18108

This BSR is for Maintenance works only

S07- 84

12,070

80627

Nos

14,266

80628

Nos

26,168

80629

Nos
80630

24,666

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q138 Supplying & fixing Vitreous China floor standing wash basin (white
colour) having nominal side of (241/2"x 19") with universal height
pedestal of floor to Rim height 32 1/2", over flow hole and single tap
hole in centre, including pedestal, Wash basin fixing kit. (Aqua+ Rocell or equivalent)
Prime Cost of, Aqua + wash basin with pedestal (Rocell)=Rs.18745

Item
Unit

BSR Rate
2016

Nos

25,475

80631

Q139 Supplying & fixing Vitreous China floor standing wash basin (white
colour) wall mounted brackets, over flow hole and single tap hole in
centre, Wash basin fixing kit. (Summer Blue-Rocell or equivalent)
Nos
Prime Cost of, Summer Blue wash basin (Rocell)=Rs.45041

Q140 Supplying & fixing Vitreous China floor standing wash basin (white
colour) wall mounted brackets, over flow hole and single tap hole in
centre, Wash basin fixing kit. (Eternity-Rocell or equivalent)
Cupling, pipe, paid separately
Prime Cost of, Eternity wash basin with wall mount kit(Rocell)=Rs.17653

Q141 Supplying & fixing Vitreous China floor standing wash basin (white
colour) wall mounted brackets, over flow hole and single tap hole in
centre, Wash basin fixing kit. (Urbanity-Rocell or equivalent)
Cupling, pipe, paid separately
Prime Cost of, Urbanity wash basin with wall mount kit(Rocell)=Rs.24204

Q142 Supplying & fixing vitreous chaina wash basin 22"x15" Coloured with
pedestal ( Equivalent to Rocell)
Prime Cost of, Wash basin 22"x15" coloured with pedestal (Indian approved
quality)=Rs.6800

Corner wash basin (Imported quality)


Q143 Supplying & fixing corner wash basin with one tap waste plug, new
brackets etc.(Imported quality)
Prime Cost of, Corner wash basin with one tap waste plug, new brackets. (Imported
quality)=Rs.4000

Corner wash basin (Indian, approved quality)


Q144 Supplying & fixing corner wash basin with one tap, waste plug, new
brackets etc.(Indian, approved quality)
Prime Cost of, Corner wash basin with one tap, waste plug, new brackets etc.(Indian,
approved quality)=Rs.4250

Corner wash basin (local Bath wear)


Q145 Supplying & fixing corner wash basin with one tap, waste plug, new
brackets etc.(Aqua Corner - Rocell or equivalent)
Prime Cost of, Aqua Corner basing with wall mount kit(Rocell)=Rs.7281

Vanity basin
Q146 Supplying and fixing Vanity basin 25"x16" white.(Refresh-Twyford
or equivalent approved quality)
Prime Cost of, Vanity Basin 25"x16" White-Twyford or equivalent=Rs.13650

Q147 Supplying and fixing Vanity basin 25"x16"colour.(Galerie-Twyford


or equivalent approved quality)
Prime Cost of, Vanity Basin 25"x16" Colour-Twyford or equivalent=Rs.18250

This BSR is for Maintenance works only

S07- 85

58,870

80632

Nos

24,088

80633

Nos

32,407

80634

Nos

10,332

80614

Nos

6,786

80616

Nos

7,104

80617

Nos

10,953

80635

Nos

18,817

80625

Nos
80626

24,659

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q148
Q149

Q150

Q151

Description

Rubber plugs
Supplying & fixing plugs, rubber 1" to 1 1/4" for wash basins and
sinks.
Supplying & fixing plugs, rubber 1 1/2" to 2" for wash basins and
sinks.
Wooden plugs
Bedding in cement mortar 1:2, plugs, wooden, in (Group 6 category
A) timber 4" long, tapered 3" to 2" square section, including making
holes in walls, floor etc.
Bottle traps
Supplying & fixing 1 1/4" dia: plastic bottle trap (Indian or equivalent,
approved quality).

Item
Unit

BSR Rate
2016

Nos

95

Nos

102

Nos

163

Nos

520

Prime Cost of, Bottle trap,1"dia: plastic . (Indian or eqivalent, approved quality)=Rs.350
80479

Q152 Supplying & fixing 1 1/2" dia: plastic bottle trap (Indian or
equivalent, approved quality).

Nos

584

Prime Cost of, Bottle trap,1"dia: plastic (Indian or eqivalent, approved quality)=Rs.400
80480

Q153 Supplying & fixing 2" dia: plastic bottle trap (Indian or equivalent,
approved quality).
Prime Cost of, Bottle trap, 2" dia: plastic.=Rs.700

Q154 Supplying & fixing 1 1/4" dia: bottle trap stainless steel approved
quality.
Prime Cost of, Bottle trap,1" dia: stainless steel =Rs.2400

Q155 Supplying & fixing 1 1/2" dia: bottle trap stainless steel approved
quality.
Prime Cost of, Bottle trap, 1"dia: stainless steel =Rs.4500

Q156
Q157
Q158
Q159
Q160
Q161

PVC P-Trap (2" dia.)


Supplying and fixing PVC, P-Trap (2" dia. )
Fixing and Repairing , available Taps
Fixing cocks, brass any size, bib or push. (cock available)
Removing cocks, brass bib, push or stop cock, 1/2" to 1 1/2".
Repairing cocks, bib or stop by fixing leather washers.
Repairing cocks, self closing by fixing leather washer.
Bib Taps (Metallic)
Supplying & fixing brass, bib taps, 1/2" (Chinese or equivalent,
approved quality)

Nos

965

80481

Nos

3,124

80482

Nos

5,791

80483

Nos

889

Nos
Nos
Nos
Nos

116
45
139
274

Nos

825

Prime Cost of, Bib tap," dia: brass (Chinees or eqivalent, approved quality)=Rs.550
80820

Q162 Supplying & fixing brass, chromium plated bib tap 1/2" . (Plumber or
Equivalent.)
Prime Cost of, Bib tap," chromium plated (Plumber)=Rs.3300

Q163 Supplying & fixing 1/2" dia. bib tap with long body chromium plated.
(Approved quality)
Prime Cost of, Bib tap with long body,"dia. chromium plated.=Rs.2100

This BSR is for Maintenance works only

S07- 86

Nos

4,317

80886

Nos
80823

2,838

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q164 Supplying and fixing 1/2" dia: chromium plated bib tap imported
(Duro or equivalent)
Prime Cost of, Bib tap," dia: chromium plated (Dura life)=Rs.3500

Bib Taps (Plastic)


Q165 Supplying & fixing Plastic Bib Tap " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Bib Tap " dia. (T- Handle) (S-Lon or Equi.) =Rs.204

Q166 Supplying & fixing Plastic Bib Tap " dia. (Round- Handle)(S-Lon
or Equivalent.)
Prime Cost of, Plastic Bib Tap " dia. (Round- Handle) (S-Lon or Equi.)=Rs.204

Q167 Supplying & fixing Plastic Bib Tap " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Bib Tap " dia. (T- Handle) (S-Lon or Equi.)=Rs.239

Item
Unit

BSR Rate
2016

Nos

4,556

80822

Nos

371

80320

Nos

371

80321

Nos

415

80322

Q168 Supplying & fixing Plastic Bib Tap " dia. (Round- Handle)(S-Lon
Nos
or Equivalent.)
Q169 Supplying & fixing Plastic long, Neck Bib Tap " dia. (T- Handle) (SNos
Lon or Equivalent.)

509
400

Prime Cost of, Plastic Bib Tap long Neck " dia. (T- Handle) (S-Lon or Equi.) =Rs.227
80324

Q170 Supplying & fixing Plastic Bib Tap, long Neck " dia. (RoundHandle)(S-Lon or Equivalent.)
Prime Cost of, Plastic Bib Tap long Neck " dia. (Round- Handle) (S-Lon or
Equi.)=Rs.259

Swan-Neck tap-(Metallic)
Q171 Supplying & fixing chromium plated swan-neck tap " (Plumber) with
necessary specials.
Prime Cost of, Chromium plated swan-neck tap " (Dura Life Plumber)=Rs.5600

Swan-Neck tap-(Plastic)
Q172 Supplying & fixing Plastic Swan- tap " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Swan Tap " dia. (S-Lon or Equi.)(T- Handle)=Rs.954

Nos

440

80325

Nos

7,350

80829

Nos

1,450

80338

Q173 Supplying & fixing Plastic Swan-Neck tap " dia. (Round- Handle)(SNos
Lon or Equivalent.)

1,450

Prime Cost of, Plastic Swan Neck Tap " dia. (S-Lon or Equi.) (Round- Handle)=Rs.954
80339

Chromium plated angle Taps/Valves 1/2"


Q174 Supplying & fixing chromium plated angle tap 1/2" with necessary
specials, imported, approved quality. (Duro or equivalent).
Prime Cost of, Chromium plated Angle valve " (Duro)=Rs.1366

Q175 Supplying & fixing chromium plated angle tap 1/2" with necessary
specials, imported, approved quality. (Indian or equivalent).
Prime Cost of, Chromium plated Angle valve " (Plumber) nectar=Rs.1800

Angle Taps/Valves (Plastic)


Q176 Supplying & fixing Plastic Angle Tap " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Right Angle Tap " dia. (T- Handle) (S-Lon or Equi.)=Rs.271

This BSR is for Maintenance works only

S07- 87

Nos

1,973

80832

Nos

2,524

80833

Nos
80334

583

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q177 Supplying & fixing Plastic Angle " dia. (Round- Handle)(S-Lon or
Equivalent.)

Item
Unit

BSR Rate
2016

Nos

514

Prime Cost of, Plastic Right Angle Tap " dia. (Round- Handle) (S-Lon or Equi.) =Rs.217
80335

Chromium plated basin tap 1/2"


Q178 Supplying and fixing basin tap.(Twyford or equivalent approved
quality)
Prime Cost of, Basin tap " dia.(Twyford or equi)=Rs.4323

Q179
Q180
Q181

Q182

Push taps
Supplying & fixing push taps 1/2" Brass, Becks, or equivalent
approved quality.
Supplying & fixing push taps, 1/2" Brass, light pattern.
Stop tap. (Imported approved quality)
Supplying & fixing 1/2" dia. chromium plated stop tap. (Imported
approved quality, concealed type)
Stop Taps (Plastic)
Supplying & fixing Plastic Stop Taps " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Stop Tap " dia. (T- Handle) (S-Lon or Equi.)=Rs.261

Q183 Supplying & fixing Plastic Stop Taps " dia. (Round- Handle)(S-Lon
or Equivalent.)
Prime Cost of, Plastic Stop Tap " dia. (Round- Handle) (S-Lon or Equi.)=Rs.215

Q184 Supplying & fixing Plastic Stop Taps " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Stop Tap " dia. (T- Handle) (S-Lon or Equi.)=Rs.330

Q185 Supplying & fixing Plastic Stop Taps " dia. (Round- Handle)(SLon or Equivalent.)
Prime Cost of, Plastic Stop Tap " dia. (Round- Handle) (S-Lon or Equi.)=Rs.215

Q186 Supplying & fixing Plastic Stop Taps 1" dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Stop Tap 1" dia. (T- Handle) (S-Lon or Equi.)=Rs.468

Q187 Supplying & fixing Plastic Stop Taps 1" dia. (Round- Handle)(S-Lon
or Equivalent.)
Prime Cost of, Plastic Stop Tap 1" dia. (Round- Handle) (S-Lon or Equi.)=Rs.531

Bath tub tap


Q188 S/F 3/4" dia. bath tub tap chromium plated, imported approved
quality.
Garden Taps (brass)
Q189 Supplying & fixing garden tap 1/2" dia: brass, heavy quality, with
necessary specials, imported, approved quality.
Garden Taps (Plastic)
Q190 Supplying & fixing Plastic Garden Tap " dia. (T- Handle) (S-Lon or
Equivalent.)
Prime Cost of, Plastic Garden Tap " dia. (T- Handle) (S-Lon or Equi.) =Rs.232

This BSR is for Maintenance works only

S07- 88

Nos

5,656

80618

Nos
Nos

1,269
1,174

Nos

2,148

Nos

701

80328

Nos

643

80329

Nos

789

80330

Nos

643

80329

Nos

964

80332

Nos

1,044

80333

Nos

1,930

Nos

1,966

Nos

406

80326

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q191 Supplying & fixing Plastic Garden Tap " dia. (Round- Handle)(SLon or Equivalent.)
Prime Cost of, Plastic Garden Tap " dia. (Round- Handle) (S-Lon or Equi.)=Rs.301

Pillar cocks
Q192 Repairing pillar cocks, fixing to Basin carefully without making any
damage to Basin.
Q193 Supplying & fixing pillar cocks 1/2" Chromium plated, to basins.
(Plumber or equivalent)
Pillar taps
Q194 Supplying and fixing 1/2" dia: chromium plated Pillar tap. (American
Standard or Equivalent.)

Item
Unit

BSR Rate
2016

Nos

494

80327

Nos

269

Nos

2,143

Nos

4,407

Prime Cost of, Chromium plated Pillar tap, " dia:. (Amarican Standerd)-4604=Rs.3382
80900

Q195 Supplying & fixing 3/4" Chromium plated pillar Cock, to baths.
,(Plumber or equivalent)
Prime Cost of, Pillar cocks "Chromium plated,(Plumber or eqivalent) =Rs.2400

Nos
80899

Basin Piller Taps (Plastic)


Q196 Supplying & fixing Plastic Basin Piller tap " dia. (Round- Handle)(SNos
Lon or Equivalent.)
Prime Cost of, Plastic Basin Piller Tap " dia. (S-Lon or Equi.) =Rs.556

Q197
Q198
Q199
Q200
Q201
Q202
Q203
Q204
Q205
Q206
Q207
Q208
Q209
Q210
Q211
Q212
Q213
Q214
Q215
Q216
Q217
Q218

Stop cock
Supplying & fixing stop cock, brass 1/2" dia.
Supplying & fixing stop cock, brass 3/4" dia.
Supplying & fixing stop cock, brass 1" dia.
Supplying & fixing stop cock, brass 1 1/4" dia.
Supplying & fixing stop cock, brass 1 1/2" dia.
Supplying & fixing stop cock, brass 2" dia.
Supplying & fixing stop cock, chromium plated 1/2" dia .
Connector, G.I
Supplying and fixing connector G.I 1/2".
Supplying and fixing connector, G.I 3/4".
Supplying and fixing connector, G.I 1".
Supplying and fixing connector G.I 1 1/4".
Supplying and fixing connector G.I 1 1/2".
Supplying and fixing connector G.I 2".
Supplying and fixing connector G.I 3".
Fixing connector, any size up to 1 1/2" (Fixing only)
Fixing connector, above 1 1/2" and up to 3" (Fixing only)
Supplying and fixing cover and seat for pedestal closets in Teak
including polishing.
Supplying & fixing cover and seat for pedestal closets in plastic.
Elbow, G.I
Supplying and fixing elbow, G.I 1/2".
Supplying and fixing elbow G.I 3/4".
Supplying and fixing elbow G.I 1".
Supplying and fixing elbow G.I 1 1/4".

This BSR is for Maintenance works only

S07- 89

3,286

945

80336

Nos
Nos
Nos
Nos
Nos
Nos
Nos

1,212
1,568
2,076
2,711
3,632
5,697
4,362

Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos

351
364
377
624
656
810
880
161
206

Nos
Nos

Deleted
1,937

Nos
Nos
Nos
Nos

189
227
284
373

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q219 Supplying and fixing elbow G.I 1 1/2".


Q220 Supplying and fixing elbow G.I 2".
Q221 Cleaning flushing cistern C.I 2 gallons and painting one coat of anticorrosive paint internally.
Q222 Supplying & fixing flushing cistern, C.I 2 gallons, existing flush pipe
and brackets etc. including ball valve.
Q223 Fixing flushing Cistern complete (cistern & brackets available)
Q224 Supplying & fixing flushing Cistern, low level, porcelain ,approved
quality complete.
Q225 Fitting in position in cistern flushing cistern lever forged out of
wrought iron, 1" x 3/16" approx. 1ft 6" long bent to shape, drilled at
both ends.
Q226 Flushing cistern, disconnecting and plugging water connection and
making good all damage to wall floors etc.
Q227 Flushing cistern, removing and re-fixing in new position including
necessary plugs, and making good to walls.
Q228 Flush pipe of pedestal closets, re-joining with yarn and putty after
removing old putty etc.
Q229 Flush pipe G.I fixing, including soldering joints, (Fixing only)
Q230 Flush pipe, G.I supplying and fixing complete.
Hooks for pipes
Q231 Hooks for 1/2" pipes, supplying and fixing.
Q232 Hooks for 3/4" pipes, supplying and fixing.
Q233 Hooks for 1" pipes, supplying and fixing.
Q234 Hooks for 1 1/4" pipes, supplying and fixing.
Q235 Hooks for 1 1/2" pipes, supplying and fixing.
Q236 Hooks for pipes, available, fixing.
Jam Nuts
Q237 Jam Nuts, G.I 1/2" supplying and fixing.
Q238 Jam Nuts, G.I 3/4" supplying and fixing.
Q239 Jam Nuts, G.I 1" supplying and fixing.
Q240 Jam Nuts, G.I 1 1/4" supplying and fixing.
Q241 Jam Nuts, G.I 1 1/2" supplying and fixing.
Q242 Jam Nuts, G.I 2" supplying and fixing.
Q243 Jam Nuts, any size up to 2" fixing (Jam Nut available).
Nipples, G.I
Q244 Nipples, G.I 1/2" Supplying & fixing.
Q245 Nipples, G.I 3/4" Supplying & fixing
Q246 Nipples, G.I 1" Supplying & fixing.
Q247 Nipples, G.I 1 1/4" Supplying & fixing.
Q248 Nipples, G.I 1 1/2" Supplying & fixing.
Q249 Nipples, G.I 2" Supplying & fixing.
Q250 Nipples, any size up to 2" fixed. (Nipple available).

This BSR is for Maintenance works only

S07- 90

Item
Unit

BSR Rate
2016

Nos
Nos

436
627

Nos

646

Nos
Nos

4,631
1,914

Nos

8,725

Nos

1,611

Nos

1,167

Nos

3,080

Nos
Nos
Nos

378
690
1,637

Nos
Nos
Nos
Nos
Nos
Nos

36
36
40
45
46
16

Nos
Nos
Nos
Nos
Nos
Nos
Nos

187
199
276
326
377
441
34

Nos
Nos
Nos
Nos
Nos
Nos
Nos

174
212
263
301
352
479
60

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q251

Q252

Q253

Q254

Q255

Q256

Q257

Q258

Q259
Q260
Q261
Q262
Q263
Q264
Q265
Q266
Q267
Q268

Description

Pipes G.I
Pipes G.I 1/2" supplying and fixing (fittings to be paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls (pipe hooks to be paid for separately)
Pipes G.I 3/4" supplying and fixing (fittings to be paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls (pipe hooks to be paid for separately).
Pipes, G.I 1" supplying and fixing (fittings to be paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 1 1/4" supplying and fixing (fittings to be paid for
separately) including any necessary trenching, backfilling and making
good, or fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 1 1/2" supplying and fixing (fittings to be paid for
separately) including any necessary trenching, backfilling and making
good, or fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 2" supplying and fixing (fittings paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 2 1/2" supplying and fixing (fittings paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 3" supplying and fixing (fittings to be paid for separately)
including any necessary trenching, backfilling and making good, or
fixing to walls. (Pipe hooks to be paid for separately)
Pipes, G.I 1/2" to 2" fixing complete with specials such as bends,
elbows etc. (pipes and specials available)
Pipes, G.I 2 1/2" to 3" fixing complete with specials such as bends,
elbows etc. (pipes and specials available)
Pipes, G.I any size up to 2" removing and trench filling in.
Pipes, G.I 4" dia. removing, and walls floors etc. making good.
Pipes, G.I existing, taking out, cleaning and relaying, any size up to 2"
including backfilling.
Pipes, G.I 2 1/2" to 3" taking out, cleaning & relaying including
backfilling.
Pipes, G.I existing, any size up to 2" taking out, cleaning and relaying
in new position, including backfilling.
Pipe joints, lead making good including soldering.
Pipes, outlet, up to 8ft 0" cleaning, (removing & relaying where
necessary will be paid for separately) assume 2ft 0" length
Pipes, underground, leaks repairing, including necessary trenching and
backfilling (pipes or fittings to be used in repairs paid for separately)

Q269 Plugs, G.I any size fixing (Plug available)


Q270 Plugs, G.I 1/2" supplying and fixing.
This BSR is for Maintenance works only

S07- 91

Item
Unit

BSR Rate
2016

L.ft

180

L.ft

250

L.ft

293

L.ft

349

L.ft

387

L.ft

529

L.ft

696

L.ft

807

L.ft

39

L.ft
L.ft
L.ft

54
30
97

L.ft

54

L.ft

74

L.ft
Nos

76
770

L.ft

30

Nos
Nos
Nos

1,114
23
188

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q271
Q272
Q273
Q274
Q275
Q276
Q277
Q278
Q279
Q280
Q281
Q282
Q283
Q284
Q285
Q286
Q287
Q288
Q289
Q290

Q291

Q292

Q293

Q294

Q295
Q296

Description

Plugs, G.I 3/4" supplying and fixing.


Plugs, G.I 1" supplying and fixing.
Plugs, G.I 1/4" supplying and fixing.
Plugs, G.I 1 1/2" supplying and fixing.
Plugs, G.I 2" supplying and fixing.
Socket G.I
Socket G.I 1/2" plain supplying & fixing.
Socket, G.I 3/4" plain supplying and fixing.
Socket, G.I 1" plain supplying and fixing.
Socket, G.I 1 1/4" plain supplying and fixing.
Socket, G.I 1 1/2" plain supplying and fixing.
Socket, G.I 2" plain supplying and fixing.
Socket, G.I 3" plain supplying and fixing.
Socket, G.I reducing 3/4" to smaller sizes supplying and fixing.
Socket, G.I reducing 1" to smaller size supplying and fixing.
Socket, G.I reducing 1 1/4" to smaller sizes supplying and fixing.
Socket, G.I reducing 1 1/2" to smaller sizes supplying and fixing.
Socket G.I reducing 2" to smaller sizes, supplying and fixing.
Sockets G.I reducing 3" to smaller sizes supplying and fixing.
Socket G.I any size fixing (socket available).
R.S.J 's as supports for tanks
Supplying & fixing in position steel work in R.S.J ' s as supports for
tanks, up to 20' 0" height and painting 2 coats anti-corrosive paint.
Removing tank G.I
Removing tank G.I, 25 to 200 gls. on existing supports up to 20' 0"
height and connecting to existing pipes including disconnecting and
taking down old tank and painting new tank 2 coats anticorrosive
paint. (Tank available and scaffolding paid separately)
Removing tank G.I. 250 to 400 gls. on existing supports up to 20' 0"
height and connecting to existing pipes including disconnecting and
taking down old tank and painting new tank 2 coats anticorrosive
paint. (Tank available and scaffolding paid separately)
Fixing tank, G.I
Fixing tank, G.I 25 - 250 gals. with overflow washout and stop cock,
fixed on R.S joists and painted 2 coats of anticorrosive paint &
connecting to supply and delivery pipes, (Tank fittings, pipes and
R.S.J will be paid for separately).
fixing tank, G.I. 250 - 400 gals. with overflow washout and stop cock,
fixed on R.S joists and painting 2 coats of anticorrosive paint
connecting to supply and delivery pipes, (Tank fittings, pipes and
R.S.J will be paid for separately).
Clearing & washing tank
Clearing & washing tank, storage, up to 400 gals capacity.
Cleaning & washing tank, storage, over 400 gals. Capacity.

This BSR is for Maintenance works only

S07- 92

Item
Unit

BSR Rate
2016

Nos
Nos
Nos
Nos
Nos

213
250
302
429
493

Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos

157
198
217
259
338
388
602
236
261
274
287
336
399
58

cwt

12,015

Nos

3,757

Nos

5,493

Nos

4,346

Nos

4,714

Nos
Nos

562
1,038

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q297 Removing tank, storage, G.I and walls made good (scaffolding will be
paid for separately where necessary).
Plastishell (Double Layer) water tank (Slon PE+ or Equivalent)
Q298 Supplying and fixing Plastishell (Single Layer) water tank 350 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank350 literPlastishell.=Rs.5848

Q299 Supplying and fixing Plastishell (Single Layer) water tank 500 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 500lit Plastishell.=Rs.7020

Q300 Supplying and fixing Plastishell (Single Layer) water tank 750 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 750 liter Plastishell.=Rs.11716

Q301 Supplying and fixing Plastishell (Single Layer) water tank 1000 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 1000lit Plastishell.=Rs.13635

Q302 Supplying and fixing Plastishell (Single Layer) water tank 1500 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 1500lit. Plastishell.=Rs.21210

Q303 Supplying and fixing Plastishell (Single Layer) water tank 5000 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 5000lit Plastishell.=Rs.55550

Plastishell (Triple Layer) water tank (Slon PE+ Premium or


Equivalent)
Q304 Supplying and fixing Plastishell (Triple Layer) water tank, 1500 lit.
capacity. ( fittings paid for separately ).
Q305 Supplying and fixing Plastishell (Triple Layer) water tank, ( 2000 liter)
capacity. ( fittings paid for separately ).
Q306 Supplying and fixing Plastishell (Triple Layer) water tank,5000 liter
capacity. ( fittings paid for separately ).
Prime Cost of, Water tank 5000lit Plastishell.=Rs.63529

Floater switch
Q307 Supplying and fixing floater switch with necessary fittings to over head
water tank.
Prime Cost of, Floater switch =Rs.1200

BSR Rate
2016

Nos

1,517

Nos

8,908

80555

Nos

10,396

80556

Nos

16,599

80557

Nos

19,036

80558

Nos

28,418

80559

Nos

72,268

80561

Nos

Deleted

Nos

Deleted

Nos

83,191

80576

Nos

2,667

150167

Tees
Tees, G.I 1/2" equal supplying and fixing.
Tees, G.I 3/4" equal supplying and fixing.
Tees, G.I 1" equal supplying and fixing.
Tees, G.I 1 1/4" equal supplying and fixing.
Tees, G.I 1 1/2" equal supplying and fixing.
Tees, G.I 2" equal, supplying and fixing.
Traps
Q314 Trap, lead fixed in position with one wipe joint (Trap available).
Q315 Trap lead, 1 1/4" supplying and fixing with one wipe joint.
Q308
Q309
Q310
Q311
Q312
Q313

This BSR is for Maintenance works only

Item
Unit

S07- 93

Nos
Nos
Nos
Nos
Nos
Nos

220
246
347
424
500
614

Nos
Nos

2,743
3,454

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q316 Trap lead 1 1/2" supplying and fixing with one wipe joint.
Q317 Trap, lead 2" supplying and fixing with one wipe joint.
Q318 Trap, lead 1" to 2" soldering and refixing.
Bath room accessories (Total Set)
Q319 Supplying & fixing set of bath room accessories such as toilet paper
holder, soap tray, tooth brush holder, towel bar and rings ,Bath room
glass shelves etc. with necessary materials, approved quality.
Tumbler holder
Q320 Supplying & fixing tumbler holder, chromium plated, to wall with rawl
plugs.
Prime Cost of, Tumbler holder, chromium plated, (Indian)=Rs.800

Item
Unit

BSR Rate
2016

Nos
Nos
Nos

4,220
6,053
3,445

Nos

Deleted

Nos

1,210

80806

Soap tray/dish
Q321 Supplying & fixing soap tray, white porcelain, to wall with rawl plugs.
Nos
Prime Cost of, Soap tray, white porcelain,(indian) =Rs.500

Q322 Supplying and fixing chromium plated soap tray.


Prime Cost of, Chromium plated soap tray.(American Standerd)-2501=Rs.5096

Q323 Supplying and fixing soap dish (American Standard or Equivalent.)


Prime Cost of, Soap dish (American Standerd)-6582=Rs.3243

Soap dispenser
Q324 Supplying & fixing soap dispenser (American Standard or
Equivalent.), white porcelain, to wall with rawl plugs.
Prime Cost of, Soap dispenser 800cc (Amarican Standerd)=Rs.24740

Shelves, plate glass


Q325 Supplying & fixing shelves, plate glass 24" x 5" with chromium plated
brackets to wall with Rawl Plugs.
Prime Cost of, Shelves, plate glass 24" x 5" with chromium plated brackets =Rs.500

Towel rail
Q326 Supplying & fixing chromium plated towel rail (Indian), 2ft 0" long
and , " dia. with necessary rawl plugs and screws.
Prime Cost of, Chromium plated towel rail (indian) , 2ft 0" long and , " dia. Width rawl
plugs and screws.=Rs.1100

Q327 Supplying & fixing chromium plated Towel rail (American Standard or
Equivalent.-S. No:6588) , 2ft 0" long and , " dia. with necessary
rawl plugs and screws.
Prime Cost of, Towel rail (American Standerd)-6588=Rs.3080

Paper holder SEVA


Q328 Supplying & fixing SEVA paper holder (American Standard or
Equivalent.) complete to working order.
Prime Cost of, SEVA paper holder (American Standerd)=Rs.3414

Tooth brush holder


Q329 Supplying & fixing tooth brush holder, Chromium plated to wall with
rawl plugs.
Prime Cost of, Tooth brush holder, Chromium plated (indian)=Rs.600

This BSR is for Maintenance works only

S07- 94

829

80785

Nos

6,718

80786

Nos

4,365

80788

Nos

31,577

80787

Nos

877

80914

Nos

1,686

80800

Nos

4,201

80799

Nos

4,471

80793

Nos
80805

956

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q330 Supplying & fixing tooth brush holder (American Standard or


Equivalent.) complete to working order.
Prime Cost of, Tooth brushr holder (American Standerd)-6582=Rs.2800

Robe hook (SEVA)


Q331 Supplying & fixing SEVA Robe hook (American Standard or
Equivalent.) complete to working order.
Prime Cost of, SEVA Robe hook (American Standerd)=Rs.3061

Bath room mirror,


Q332 Supplying & fixing mirror, bevelled, bath room type, oval shape, 20" x
16" Max. and min. dimensions, to wall with Rawl plugs and chromium
plated fittings.
Prime Cost of, Mirror with fittings 20"x16"(ovel shaped)=Rs.2400

Q333 Supplying & fixing 24" x 18", 5mm thickness bevelled rectangular
mirror, to wall with Rawl plugs, noton tape and chromium plated
fittings.
Prime Cost of, Mirror with fittings 24"x18"(Rectanguler shaped)=Rs.3250

Q334 Supplying and fixing toilet mirror cabinet with necessary rawl plugs
and screws etc.( D 1003 s/s)
Shower rose-Fixing Only
Q335 Fixing shower rose, any size (shower rose Paid separately).
Shower rose
Q336 Supplying & fixing Shower rose, 6" copper.
Q337 Supplying & fixing shower Rose 7" chromium plated.
Q338 Soldering and refixing shower Rose.
Q339 Supplying & fixing PVC- 6" x 1/2" shower rose.
Plastic Jet Shower rose
Q340 Supplying & fixing Plastic Jet Shower Rose " dia. (S-Lon or
Equivalent.)
Q341 Supplying & fixing Jet shower complete(American Standard or
Equivalent.)
Prime Cost of, Jet shower (Amarican Standerd)(modle 6060/6022)=Rs.5950

Shower head
Q342 Supplying & fixing Shower head with arm. (American Standard or
equivalent)
Prime Cost of, Shower head with arm (Amarican Standerd) CF 9026=Rs.6232

Bidet spray imported


Q343 Supplying and fixing bidet spray imported Indian or equivalent.
Prime Cost of, Bidet spray imported ( Plumber )=Rs.3535

Q344 Supplying and fixing bidet spray imported (Grohe or equivalent).


Prime Cost of, Bidet spray ( Grohe or equivalent )=Rs.4545

Accessories
Q345 Supplying & fixing chain, chromium plated, for bath or basin, with
plug.
Q346 Supplying & fixing chain pulls, chromium plated, for flushing cistern.

This BSR is for Maintenance works only

S07- 95

Item
Unit

BSR Rate
2016

Nos

3,691

80808

Nos

4,023

80602

Nos

3,670

80645

Nos

4,749

80646

Nos

9,258

Nos

104

Nos
Nos
Nos
Nos

Deleted
459
482
599

Nos

859

Nos

7,683

80772

Nos

8,133

80777

Nos

4,768

80735

Nos

6,063

80736

Nos
Nos

203
292

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q347

Q348
Q349
Q350
Q351
Q352
Q353
Q354
Q355
Q356
Q357
Q358
Q359
Q360
Q361
Q362
Q363
Q364
Q365
Q366

Description

Fixing bends, elbows and tees- Workmanship only


Fixing bends, elbows and tees and other specials of P.V.C size
3".(Workmanship only).
Bends P.V.C
Supplying & fixing bends P.V.C 1/2".
Supplying & fixing bends P.V.C 3/4".
Supplying & fixing bends P.V.C 1".
Supplying & fixing bends P.V.C 1 1/4".
Supplying & fixing bends P.V.C 1 1/2".
Supplying & fixing bends P.V.C 2".
Supplying & fixing bends P.V.C 3".
Elbows P.V.C
Supplying & fixing elbows P.V.C 1/2".
Supplying & fixing elbows P.V.C 3/4".
Supplying & fixing elbows P.V.C 1".
Supplying & fixing elbows P.V.C 1 1/4".
Supplying & fixing elbows P.V.C 1 1/2".
Supplying & fixing elbows P.V.C 2".
Supplying & fixing elbows P.V.C 3".
Reducing sockets & Tees P.V.C
Supplying & fixing sockets reducing P.V.C (3/4"x1/2" ) to smaller
sizes.
Supplying & fixing sockets reducing P.V.C (1" x3/4") to smaller
sizes.
Supplying & fixing sockets reducing P.V.C (1 1/4"x1") to smaller
sizes.
Supplying & fixing sockets reducing P.V.C (1 1/2" x1 1/4") to smaller
sizes.
Supplying & fixing sockets reducing P.V.C (2" x1") to smaller sizes.

Q367 Supplying & fixing sockets reducing P.V.C (2" x1 1/2") to smaller
sizes.
Reducing Tees P.V.C
Q368 Supplying & fixing tees reducing P.V.C (3/4"x1/2" ) to smaller sizes.
Q369 Supplying & fixing tees reducing P.V.C (1" x3/4") to smaller sizes.
Q370 Supplying & fixing tees reducing P.V.C (1 1/4"x1") to smaller sizes.
Q371 Supplying & fixing tees reducing P.V.C (1 1/2" x1 1/4") to smaller
sizes.
Q372 Supplying & fixing tees reducing P.V.C (2" x1 1/2") to smaller sizes.
Q373 Supplying & fixing tees reducing P.V.C (3" x 2") to smaller sizes.
Q374 Supplying & fixing reducing tee P.V.C. ( 4" - 2")
Repair Sockets & Tees P.V.C
Q375 Supplying & fixing repair socket P.V.C 1/2".
Q376 Supplying & fixing repair socket P.V.C 3/4".
This BSR is for Maintenance works only

S07- 96

Item
Unit

BSR Rate
2016

Nos

47

Nos
Nos
Nos
Nos
Nos
Nos
Nos

82
97
115
199
290
447
1,825

Nos
Nos
Nos
Nos
Nos
Nos
Nos

67
87
97
124
194
250
656

Nos

78

Nos

94

Nos

130

Nos

168

Nos

201

Nos

223

Nos
Nos

100
108

Nos

166

Nos
Nos
Nos
Nos

242
377
919
2,424

Nos
Nos

69
82

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q377
Q378
Q379
Q380
Q381
Q382
Q383
Q384
Q385
Q386
Q387
Q388
Q389
Q390
Q391
Q392
Q393
Q394
Q395
Q396
Q397
Q398
Q399
Q400
Q401
Q402
Q403
Q404
Q405
Q406
Q407
Q408
Q409

Q410

Description

Supplying & fixing repair socket P.V.C 1".


Supplying & fixing repair socket P.V.C 1 1/4".
Supplying & fixing repair socket P.V.C 1 1/2".
Supplying & fixing repair socket P.V.C 2".
Supplying & fixing repair socket P.V.C 3".
Valve Socket P.V.C
Supplying & fixing valve socket P.V.C 1/2".
Supplying & fixing valve socket P.V.C 3/4".
Supplying & fixing valve socket P.V.C 1".
Supplying & fixing valve socket P.V.C 1 1/4".
Supplying & fixing valve socket P.V.C 1 1/2".
Supplying & fixing valve socket P.V.C 2".
Supplying & fixing valve socket P.V.C 3".
Faucet Socket P.V.C
Supplying & fixing faucet sockets P.V.C 1/2".
Supplying & fixing faucet sockets P.V.C 3/4".
Supplying & fixing faucet sockets P.V.C 1".
Supplying & fixing faucet sockets P.V.C 1 1/4".
Supplying & fixing faucet sockets P.V.C 1 1/2".
Supplying & fixing faucet sockets P.V.C 2". P
Supplying & fixing faucet sockets P.V.C 3".
Tapered union without thread P.V.C
Supplying & fixing tapered union without thread P.V.C 1/2".
Supplying & fixing tapered union without thread P.V.C 3/4".
Supplying & fixing tapered union without thread P.V.C 1".
Supplying & fixing tapered union without thread P.V.C 1 1/4".
Supplying & fixing tapered union without thread P.V.C 1 1/2".
Supplying & fixing tapered union without thread P.V.C 2".
Supplying & fixing tapered union without thread P.V.C 3".
Supplying & fixing tapered union with thread for P.V.C and metal
pipe connection 1/2".
Supplying & fixing tapered union 3/4" with thread for P.V.C & metal
pipe connections.
Supplying & fixing tapered union 1" with thread for P.V.C & metal
pipe connections.
Supplying & fixing tapered union 1 1/4" with thread for P.V.C &
metal pipe connections.
Supplying & fixing tapered union 1 1/2" with thread for P.V.C &
metal pipe connections.
Supplying & fixing tapered union 2" with thread for P.V.C & metal
pipe connections.
Supplying & fixing tapered union 3" with thread for P.V.C & metal
pipe connections.
Equal tees-P.V.C
Supplying & fixing tees equal P.V.C 1/2".

This BSR is for Maintenance works only

S07- 97

Item
Unit

BSR Rate
2016

Nos
Nos
Nos
Nos
Nos

95
123
160
236
636

Nos
Nos
Nos
Nos
Nos
Nos
Nos

138
153
233
395
391
608
4,048

Nos
Nos
Nos
Nos
Nos
Nos
Nos

72
87
97
138
168
209
555

Nos
Nos
Nos
Nos
Nos
Nos
Nos

682
745
1,253
2,079
2,714
3,539
3,857

Nos

364

Nos

491

Nos

491

Nos

809

Nos

961

Nos

1,698

Nos

2,447

Nos

72

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Q411
Q412
Q413
Q414
Q415
Q416
Q417
Q418
Q419
Q420
Q421
Q422
Q423
Q424
Q425
Q426
Q427
Q428
Q429
Q430
Q431
Q432
Q433
Q434
Q435
Q436
Q437

Q438
Q439
Q440
Q441

Description

Supplying & fixing tees equal P.V.C 3/4".


Supplying & fixing tees equal P.V.C 1".
Supplying & fixing tees equal P.V.C 1 1/4".
Supplying & fixing tees equal P.V.C 1 1/2".
Supplying & fixing tees equal P.V.C 2".
Supplying & fixing tees equal P.V.C 3".
Plugs, sockets-P.V.C
Supplying & fixing plugs P.V.C 1/2".
Supplying & fixing plugs P.V.C 3/4".
Supplying & fixing plugs P.V.C 1".
Supplying & fixing plugs P.V.C 1 1/4".
Supplying & fixing plugs P.V.C 1 1/2".
Supplying & fixing Plugs P.V.C 2".
Supplying & fixing plugs P.V.C 3".
Supplying & fixing sockets plain P.V.C 1/2".
Supplying & fixing sockets plain P.V.C 3/4".
Supplying & fixing sockets plain P.V.C 1".
Supplying & fixing sockets plain P.V.C 1 1/4".
Supplying & fixing sockets plain P.V.C 1 1/2".
Supplying & fixing sockets plain P.V.C 2".
Supplying & fixing sockets plain P.V.C 3".
Pipes P.V.C
Supplying & fixing pipes P.V.C, 1/2" dia.(Type 1000)- PE.(Fittings
paid separately).
Supplying & fixing pipes P.V.C, 3/4"dia.(Type 1000)- PE (Fittings
paid separately).
Supplying & fixing pipes P.V.C, 1"dia. (Type 1000)- PE(Fittings paid
separately).
Supplying & fixing pipes P.V.C, 1 1/4"dia. (Type 1000)- PE(Fittings
paid separately).
Supplying & fixing pipes P.V.C 1 1/2"dia. (Type 1000)- PE (Fittings
paid separately).
Supplying & fixing pipes P.V.C, 2"dia. (Type 1000)- PE (Fittings
paid separately).
Supplying & fixing pipes P.V.C 3". (Type 1000)- PE (Fittings paid
separately).
Fixing pipes
Fixing pipes P.V.C, 1/2" to 2" dia. Complete with specials. (pipes &
specials paid separately).
Fixing pipes P.V.C, 2 1/2" to 3"dia. complete with specials. (pipes &
specials paid separately).
Forming bends or jointing pipes by heating without fixing specials in
rigid P.V.C, 1/2" to 1"dia. (Workmanship only).
Forming bends or jointing pipes by heating without fixing specials in
rigid P.V.C 1 1/4" to 2" dia.(Workmanship only).

This BSR is for Maintenance works only

S07- 98

Item
Unit

BSR Rate
2016

Nos
Nos
Nos
Nos
Nos
Nos

97
123
166
247
308
842

Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos

74
83
78
115
143
191
668
69
82
95
123
160
236
655

L.ft

23

L.ft

53

L.ft

112

L.ft

147

L.ft

191

L.ft

306

L.ft

576

L.ft

32

L.ft

42

Nos

53

Nos

82

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Q442 Forming bends or jointing pipes by heating without fixing specials in


rigid P.V.C, 2 1/2" to 3"dia. (Workmanship only).
Pipes P.V.C (25% pipe cost included for Specials)
Q443 Supplying & fixing pipes P.V.C, 1/2" dia. (Type 1000) including
specials. (25% pipe cost included for Specials)
Q444 Supplying & fixing pipes P.V.C, 3/4"dia. (Type 1000) including
specials. (25% pipe cost included for Specials)
Q445 Supplying & fixing pipes P.V.C, 1"dia. (Type 1000) including
specials. (25% pipe cost included for Specials)
Q446 Supplying & fixing pipes P.V.C, 1 1/4"dia. (Type 1000) including
specials. (25% pipe cost included for Specials)
Q447 Supplying & fixing pipes P.V.C, 1 1/2"dia. (Type 1000) including
specials. (25% pipe cost included for Specials)
Q448 Supplying & fixing pipes P.V.C, 2"dia. (Type 1000) including specials.
(25% pipe cost included for Specials)
Flexible cord (S--Lon or Equivalent))
Q449 Supplying and fixing flexible cord -12" (S-lon or equivalent)
Q450 Supplying and fixing flexible cord -18" (S-lon or equivalent)
Q451 Supplying and fixing flexible cord -24" (S-lon or equivalent)
Q452 Supplying and fixing flexible cord -48" (S-lon or equivalent)
Q453 Supplying and fixing flexible cord -60" (S-lon or equivalent)
Flexible cord (Imported European)
Q454 Supplying and fixing flexible cord 1ft -6" imported, approved quality.
(Italy or equivalent). " dia.
Q455 Supplying and fixing flexible cord 1ft -0" imported, approved quality.
(Italy or equivalent). " dia.
Flexible hose
Q456 Supplying and fixing 1/2" dia: Flexible hose (American Standard or
Equivalent.) 1ft -6" long
Prime Cost of, Flexible hose (Amarican Standerd) - 18"=Rs.443

Q457
Q458
Q459
Q460
Q461

Garden Watering Hose " dia.


Supplying Garden Hose " dia. & 15m long (S-Lon or equivalent).
Supplying Garden Hose " dia. & 30m long (S-Lon or equivalent).
Water pump
Installing available 3/4"-1" water pump with necessary fittings, foot
valve, concrete base, rag bolts etc.(concrete paid for separately)
Installing available 1 1/2"-2" dia. water pump with necessary fittings,
concrete base and rag bolts.(concrete paid for separately).
Supplying and installation of "Jinasena" 1/2" dia. Water pressure pump
Prime Cost of, Pressure pump (Br - 50)=Rs.18370

Q462 Supplying and fixing 1" dia. pressure pump 110/A 18/1 (Centric type
pumping unit)
Prime Cost of, Presure pump,1" dia. ( 110/A 18/1)=Rs.34532

This BSR is for Maintenance works only

S07- 99

Item
Unit

BSR Rate
2016

Nos

102

L.ft

29

L.ft

66

L.ft

136

L.ft

179

L.ft

233

L.ft

376

Nos
Nos
Nos
Nos
Nos

247
295
356
524
571

Nos

798

Nos

670

Nos

670

80751

Nos
Nos

1,397
2,667

Nos

5,332

Nos

7,453

Nos

28,696

80976

Nos
80975

51,197

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Electric water geyser


Q463 Replacing available Electric water Geyser , making hot water Supply
in order.
Q464 Supplying and fixing 50 Liter Electric water Geyser ( approved
quality) on a wall or existing brackets and connected to the hot water
supply system.(hot water piping system paid separately)
Prime Cost of, Water greezer (water heater 50 lit.)-Ariston or equi=Rs.27500

Q465 Supplying and replacing of Electric water geezer (water heater 30 lit.)
imported quality.
Prime Cost of, Water greezer (water heater 30 lit.)Ariston or equi=Rs.23500

Q466 Supplying and fixing of instant water geezer (water booster pump)
imported quality.
Prime Cost of, Instant water greezer (with booster pump.)=Rs.15449

Q467 Supplying and fixing of instant water geezer (water booster pump)
imported quality.
Prime Cost of, Instant water greezer (with booster pump.)=Rs.17509

Q468 Supplying and fixing of instant water geezer (water booster pump)
imported quality.
Prime Cost of, Instant water greezer (with booster pump.)=Rs.25749

Plastic gully
Q469 Supplying & fixing plastic gully grating 6"x6".
Q470 Providing Catch pit 6"x6"x3" in cement mortar.
Shower tray fiberglass
Q471 Supplying & fixing shower tray fiberglass 30" x 32" including waste
plug & specials

Item
Unit

BSR Rate
2016

Nos

1,099

Nos

36,564

80965

Nos

30,969

80966

Nos

Deleted

80967

Nos

23,107

80968

Nos

33,572

80969

Nos
Nos

308
500

Nos

9,733

Prime Cost of, Shower tray fiberglass 30" x 32" including waste plug & specials=Rs.7000
80773

Elbows for down pipe.


Q472 Supplying & fixing or replacing, only a 3 1/2" P.V.C. elbows for
down pipe.
Running head.
Q473 Supplying & fixing or replacing, only a P.V.C. running head.
Gutter end.
Q474 Supplying & fixing or replacing, only a square type P.V.C. gutter
ends.
Gutter Joint.
Q475 Supplying & fixing or replacing, only a square type P.V.C. gutter
joints.
Eves gutters (PVC)-Square type
Q476 Supplying and fixing eves gutters square type PVC with necessary
specials, including running heads, miter joints, gutter joints, gutter
brackets, gutter ends etc.
Q477 Supplying & fixing eave gutters 6" half-round P.V.C with P.V.C
brackets.

This BSR is for Maintenance works only

S07- 100

Nos

403

Nos

585

Nos

359

Nos

378

L.ft

243

L.ft

201

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Down pipes 3" dia. P.V.C


Q478 Supplying & fixing rain water down pipes 3 " dia. P.V.C to wall,
with necessary specials, including elbows, sockets, clips etc.

This BSR is for Maintenance works only

S07- 101

Item
Unit

BSR Rate
2016

L.ft

149

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

R001
R002
R003
R004

R005

R006

Description

R-DRAIN LAYER
Interceptor, Earthenware
Interceptor, earthenware, 4" supplying and fixing.
Interceptor, earthenware, 6" supplying and fixing.
Interceptor, earthenware, 4" supplying and fixing. (Fixing only).
Manhole- brick in cement
Manhole 2'-0" x 2'-0" and up to 2'-0" deep, 9" thick brick in cement
1:3 walls and cement rendering 1/2" (1:2) with 6" cement concrete
foundation 1:3:6(2" metal) including forming channels, but without
cover.
Manhole 3'-6" x 2'-3" and 2'-0" to 4'-0" deep 9" thick brick in cement
1:3 walls and cement rendering 1/2" (1:2) with 6" cement concrete
foundation 1:3:6(2" metal) including forming channels, but without
cover.
Manhole 3'-6" x 2'-3" and 4'-0" to 6'-0" deep, 9" thick brick in cement
1:3 walls and cement rendering 1/2" (1:2) with 6" cement concrete
foundation 1:3:6 (2" metal) including forming channels, but without
cover.
RCC Manhole (Type A)- [As per Drg.No 2013-TP-ST06 & ST07]

Item
Unit

BSR Rate
2016

Nos
Nos
Nos

4,613
5,803
1,057

Nos

11,230

Nos

18,871

Nos

31,428

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

R007 RCC Manhole type A, Internal dimensions 475 x 625mm (depth up to


450mm) wall thickness 150mm & base Slab thickness 150mm. (Cover
Slab & Inlet / Outlet Connections Paid for Separately) Single R/F
R008 RCC Manhole type A, Internal dimensions 475 x 625mm (Depth is
greater than 450mm & up to 600mm) wall thickness 187.5 mm & base
Slab thickness 175 mm. (Cover Slab & Inlet / Outlet Connections
Paid Separately) Double R/F
R009 RCC Manhole type , Internal dimensions A- 475 x 625mm (Depth is
greater than600mm & upto750 mm) wall thickness 187.5mm & base
Slab thickness 175 mm. (Cover Slab & Inlet / Outlet Connections
Paid for Separately) Double R/F
R010 RCC Manhole type A, Internal dimensions 475 x 625mm (Depth is
greater than 750mm & up to 900mm) wall thickness 187.5mm & base
Slab thickness 175mm. (Cover Slab & Inlet / Outlet Connections Paid
for Separately) Double R/F
RCC Manhole (Type B)- [As per Drg.No 2013-TP-ST06]
R011 RCC Manhole type B ,Internal dimensions 475 x 750mm (depth up to
450mm)wall thickness 150 mm & base Slab thickness 150 mm.(Cover
Slab & Inlet / Outlet Connections Paid Separately) Single R/F
R012 RCC Manhole type B - 475 x 750mm internally (Depth is greater than
450mm & up to 600mm) wall thickness 175 mm & base Slab thickness
175mm. (Cover Slab & Inlet / Outlet Connections Paid Separately)
Double R/F
This BSR is for Maintenance works only

S07- 102

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

R013 RCC Manhole type B- 475 x 750mm internally (Depth is greater


than600mm & upto750 mm) wall thickness 175 mm & base Slab
thickness 175mm. (Cover Slab & Inlet / Outlet Connections Paid
Separately) Double R/F
R014 RCC Manhole type B, Internal dimensions 475 x 750mm internally
(Depth is greater than 750mm & up to 900mm) wall thickness 175
mm & base Slab thickness 175mm. (Cover Slab & Inlet / Outlet
Connections Paid Separately) Double R/F
RCC Manhole (Type C)- [As per Drg.No 2013-TP-ST06]
R015 RCC Manhole type C- 475 x1050mm internally (Depth up to 450mm)
wall thickness 100 mm & base Slab thickness 150 mm. (Cover Slab &
Inlet / Outlet Connections Paid Separately) Single R/F
R016

R017

R018

R019

R020
R021

R022
R023
R024
R025

RCC Manhole type C , Internal dimensions 475 x1050mm (Depth is


greater than 450mm & up to 600mm) wall thickness 175 mm & base
Slab thickness 175 mm. (Cover Slab & Inlet / Outlet Connections Paid
Separately) Double R/F
RCC Manhole type C, Internal dimensions 475 x1050mm
internally(Depth is greater than600mm & upto750 mm) wall thickness
175 mm & base Slab thickness 175mm.. (Cover Slab & Inlet / Outlet
Connections Paid Separately) Double R/F
RCC Manhole type C , Internal dimensions 475 x1050mm (Depth is
greater than 750mm & up to 900mm) wall thickness 175 mm & base
Slab thickness 175mm. (Cover Slab & Inlet / Outlet Connections Paid
Separately) Double R/F
Manhole cover, reinforced concrete
Manhole cover, reinforced concrete 3" thick 2ft 0" x 2ft 0" approx.
supplying and fixing, reinforced with 1/4" dia. M.S. rods at 3" centers,
both ways.
Manhole cover, Cast Iron
Manhole cover C.I rectangular, above 1 cwt. supplying and fixing.
Manhole cover Ductile iron rectangular 2'X2', supplying and fixing.
(heavy duty) 12.5 TON (Prime cost Rs.17,000)
Cast iron grating
Grating C.I, 6" x 6" supplying and fixing.
Wire dome (Steel)
Wire domes for 2" pipes supplying and fixing.
Wire domes for 4" pipes supplying and fixing.
Wire dome (PVC)
Supplying & fixing PVC wire dome for 2" dia. P.V.C drainage pipes.

Item
Unit

BSR Rate
2016

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

Nos

Deleted

sq.ft

367

Nos

10,987

Nos

23,037

Nos

523

Nos
Nos

356
419

Nos

292

Nos

387

Nos

951

R026 Supplying & fixing PVC wire dome for 4" dia. P.V.C drainage pipes.
Drainage Fittings 4" (110mm) dia-(Local make)
R027 Supplying & fixing 4" dia. P.V.C plain socket (Local make)
This BSR is for Maintenance works only

S07- 103

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

R028 Supplying & fixing 4" dia. P.V.C drainage elbow with single Door,
approved quality with rubber ring joint.(Locally made)
R029 Supplying & fixing 4" dia. P.V.C drainage bend 45 degree. (S-Lon or
Equivalent.)
R030 Supplying & fixing 4" dia. P.V.C drainage bend 45 degree ,with single
Door (S-Lon or Equivalent.)
R031 Supplying & fixing 4" dia. P.V.C drainage bend 89 degree. (S-Lon or
Equivalent.)
R032 Supplying & fixing 4" dia. P.V.C drainage bend 89 degree. With single
Door (S-Lon or Equivalent.)
R033 Supplying & fixing 4" dia. P.V.C drainage Tee. (S-Lon or Equivalent.)
R034 Supplying & fixing 4" dia. P.V.C drainage Swept Tee. (S-Lon or
Equivalent.)
R035 Supplying & fixing 4" dia. P.V.C drainage Tee. with single Door (SLon or Equivalent.)
R036 Supplying & fixing 4" dia. P.V.C drainage Swept Tee. with single
Door (S-Lon or Equivalent.)
R037 Supplying & fixing 4" dia. P.V.C drainage "Y" junction (S-Lon or
Equivalent.)
R038 Supplying & fixing 4" dia. P.V.C drainage "Y" junction with single
Door (S-Lon or Equivalent.)
Drainage Fittings 2" (63mm) dia.
R039 Supplying & fixing 2" dia. P.V.C drainage bend 45 degree. (S-Lon or
Equivalent.)
R040 Supplying & fixing 2" dia. P.V.C drainage bend 45 degree, with single
Door (S-Lon or Equivalent.)
R041 Supplying & fixing 2" dia. P.V.C drainage bend 89 degree. (S-Lon or
Equivalent.)
R042 Supplying & fixing 2" dia. P.V.C drainage bend 89 degree, with single
Door (S-Lon or Equivalent.)
R043 Supplying & fixing 2" dia. P.V.C drainage Tee. (S-Lon or Equivalent.)
R044 Supplying & fixing 2" dia. P.V.C drainage Swept Tee. (S-Lon or
Equivalent.)
R045 Supplying & fixing 4" dia. P.V.C drainage Tee. with single Door (SLon or Equivalent.)
R046 Supplying & fixing 2" dia. P.V.C drainage Swept Tee. with single
Door (S-Lon or Equivalent.)
R047 Supplying & fixing 2" dia. P.V.C drainage "Y" junction (S-Lon or
Equivalent.)
R048 Supplying & fixing 2" dia. P.V.C drainage "Y" junction with single
Door (S-Lon or Equivalent.)

This BSR is for Maintenance works only

S07- 104

Item
Unit

BSR Rate
2016

Nos

1,218

Nos

804

Nos

958

Nos

736

Nos

1,040

Nos

1,080

Nos

1,180

Nos

1,207

Nos

1,388

Nos

1,244

Nos

1,117

Nos

438

Nos

531

Nos

594

Nos

915

Nos

633

Nos

630

Nos

755

Nos

821

Nos

603

Nos

771

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

R049
R050
R051
R052
R053
R054
R055
R056
R057
R058

R059

Description

Drainage Fittings 1"or (50mm) dia


Supplying & fixing 1" dia. P.V.C drainage bend 45 degree. (S-Lon
or Equivalent.)
Supplying & fixing 1" dia. P.V.C drainage bend 45 degree with
single Door (S-Lon or Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage bend 89 degree. (S-Lon
or Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage bend 89 degree, with
single Door (S-Lon or Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage Tee. (S-Lon or
Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage Swept Tee. (S-Lon or
Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage Tee. with single Door (SLon or Equivalent.)
Supplying & fixing 1"" dia. P.V.C drainage Swept Tee. with single
Door (S-Lon or Equivalent.)
Supplying & fixing 1" dia. P.V.C drainage "Y" junction (S-Lon or
Equivalent.)
Supplying & fixing 1" dia. P.V.C drainage "Y" junction with single
Door (S-Lon or Equivalent.)
Pipes P.V.C, 4"(110mm) dia, (type 250)-(Vent pipes fixed to
walls)
Supplying & fixing 4" dia. (type 250) P.V.C pipes as vent pipes fixed
to walls with necessary wooden plugs and P.V.C saddles at 4ft
centers.
Pipes P.V.C, 4"(110mm)dia, (type 400)-(Vent pipes fixed to walls)

R060 Supplying & fixing 4" dia. (type 400) P.V.C pipes, as drainage pipes
fixed to walls with necessary wooden plugs, brass screws & saddles at
4ft centers.
Pipes P.V.C, 4"(110mm) dia, (type 400)- lay in Trenches
R061 Pipes P.V.C, 4" dia, (type 400) laying on cement concrete 6" thick
bedding up to 2ft 0" depth of invert including excavation and cement
concrete hunching (1:3:6(1")).
R062 Pipes P.V.C, 4" dia, (type 400) laying on cement concrete 6" thick
bedding over 2 ft. up to 4 ft. depth of invert including excavation and
cement concrete hunching (1:3:6(1")).
R063 Drains P.V.C, 4" dia, (type 400) laying on cement concrete 6" thick
bedding over 4ft -0" up to 6ft -0" depth of invert including excavation
and cement concrete hunching (1:3:6(1")).
Drain Pipes P.V.C, 4" dia, (type 600)- lay in Trenches
R064 Drains, P.V.C, 4" dia: (type 600) laying on cement concrete 6" thick
bedding up to 2ft 0" depth of invert including excavation, back filling
and cement concrete hunching 1:3:6(1").
This BSR is for Maintenance works only

S07- 105

Item
Unit

BSR Rate
2016

Nos

409

Nos

485

Nos

415

Nos

485

Nos

541

Nos

596

Nos

647

Nos

744

Nos

577

Nos

656

L.ft

482

L.ft

571

L.ft

658

L.ft

768

L.ft

813

L.ft

1,006

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

R065 Drains P.V.C, 4" dia. (type 600) laying on cement concrete 6" thick
bedding over 2 ft. up to 4 ft. depth of invert including excavation
back filling and cement concrete hunching 1:3:6(1").
R066 Drains P.V.C, 4" dia. (type 600) laying on cement concrete 6" thick
bedding over 4 ft. up to 6 ft. depth of invert including excavation
back filling and cement concrete hunching 1:3:6(1").
Drain Pipes P.V.C, 6" dia, (type 600)- lay in Trenches
R067 Drains PVC, 6" dia. (type 600) laying on cement concrete 6" thick
bedding up to 2ft. depth of invert including excavation , backfilling
and cement concrete hunching 1:3:6 (1").
R068 Drains PVC, 6" dia.( type 600 ) laying on cement concrete 6" thick
bedding over 2ft. up to 4ft. depth of invert including excavation
backfilling and cement concrete hunching 1:3:6 (1" ).
R069 Drains PVC, 6" dia.( type 600 ) laying on cement concrete 6" thick
bedding 4ft. up to 6ft. depth of invert including excavation backfilling
and cement concrete hunching 1:3:6 (1") .
Drain Pipes P.V.C, 12" dia, (type 600)
R070 Drains PVC, 12" dia.( type 600 ) laying on cement concrete 6" thick
bedding over 2ft. up to 4ft. depth of invert including excavation
backfilling and cement concrete hunching 1:3:6 (1" ).

This BSR is for Maintenance works only

S07- 106

Item
Unit

BSR Rate
2016

L.ft

1,055

L.ft

1,205

L.ft

1,595

L.ft

1,648

L.ft

1,795

L.ft

4,517

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

S001

S002

S003
S004
S005
S006

S007

S008
S009

S010

S011

S012

S013

Description

S-MISCELLANEOUS
Bamboo barricade 3ft 0" high composing of whole bamboos with one
horizontal runner and uprights 6ft 0" apart, supplying and fixing and
removing as and when required, (Salvaged materials to be contractor s
property)
Bamboo barricade 4ft 0" high with 2 horizontal runners and uprights
6ft 0" apart, supplying and fixing and removing as and when required,
(Salvaged materials to be contractor s property).
Bamboo supplying only at site.
Bamboo supplying and fixing in position.
Bamboos removing and refixing with coir strings.
Scaffolding of Bamboos
Erecting scaffolding of Bamboos and planks for lifting or lowering of
storage tanks to a height of 15ft to 30ft and removing same after
completion of work (salvaged materials to be contractor's property).
Erecting scaffolding of Bamboos and planks for lifting or lowering of
storage tanks to a height of 30ft to 50ft and removing same after
completion of work (salvaged materials to be contractor s property).
Steel scaffolding Sets
Hiring a steel scaffolding set per day at site.
Labour for handling, Erecting & dismantling a steel scaffolding set .
(up to 30' feet height )
Garden lamp
Supplying and fixing garden lamp (Mushroom type)
Fencing
Note: Refer Item numbers From J080 to JO82 for chain-link
fencing
Fence, G.I barbed wire( gauge 14), four needles per each node & 4"
apart with three curls of wire, supplying & fixing on existing timber
posts with G.I staples. (Min Tensile Strength of B.wire 310 N/mm2)
Fence, G.I barbed wire( gauge 14), four needles per each node & 4"
apart with three curls of wire, supplying & fixing on existing concrete
posts with available hook bolts. (Min Tensile Strength of B.wire 310
N/mm2)
Fence, G.I barbed wire( gauge 14), four needles per each node & 4"
apart with three curls of wire, supplying & fixing in renewing short
lengths on timber posts. (Min Tensile Strength of B.wire 310 N/mm2)

S014 Fence, G.I barbed wire( gauge 14), four needles per each node & 4"
apart with three curls of wire, supplying & fixing on concrete posts
with available hook bolts, (Min Tensile Strength of B.wire 310
N/mm2)
S015 Fence, PVC coated barbed wire, four needles per each node & 3"
apart with three curls of wire, supplying & fixing on concrete posts
with available hook bolts.
This BSR is for Maintenance works only

S07- 107

Item
Unit

BSR Rate
2016

L.ft

75

L.ft
L.ft
L.ft
L.ft

89
19
24
5

Nos

18,233

Nos

Deleted

Nos

39

Nos

29

Nos

2,366

L.ft

11

L.ft

11

L.ft

12

L.ft

12

L.ft

16

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

S016 Fence barbed wire fixing with G.I staples on existing timber posts
(Barbed wire available).
S017 Fixing barbed wire fence with G.I staples on concrete posts with
available hook bolts.(barbed wire available).
S018 Fence, barbed wire, straining only and refixing with staples, (barbed
wire available)
S019 Fence, barbed wire, straining only and refixing on concrete posts with
available hook bolts.
S020 Fence posts or struts, Milla, Na, Palu or Satin 4" to 6" average dia.
supplying and fixing in ground complete, inclusive of sharpening and
tarring.
S021 Intermediate fence posts or struts, cement concrete 1:1 1/2: 3 (3/4")
reinforced with 4 Nos. 1/4" dia. M.S rods, 5ft 7" high square section
4" to 6" supplying and fixing complete as per drawing No. 68 of
22.07.1936.
S022 Intermediate fence posts or structs, cement concrete 1:1 1/2: 3 (3/4")
reinforced with 4 Nos. 1/4" dia. M.S rods, 7ft 6" high square section
4" to 6" supplying and fixing complete as per drawing No. 68 of
22.07.1936.
S023 End post and strut for Type barbed wire fence supplying and fixing
complete in cement concrete as per drawing No: 68 of 1936.
S024 Fence, bared wire, 5 strands, 12 1/2 B.W.G with 4 points at 3" centers
and R.C. posts (1:2:4) 3/4" metal, reinforced with 4 Nos. 1/4" rods
with No. 14 B.W.G stirrups at 8" centers. Post to be fixed at 8ft 0"
centers including excavation, cement concrete
S025 Straining Bolts, 18" long 1/2" dia. making and fixing (approx.).
S026 Stoneware pipes, 4" dia, over fume cupboards, supplying and fixing
along wall with iron brackets and plugs.
Well, bailing out water
S027 Well, bailing out water, 5ft -7" dia. up to 20ft depth including
cleaning well. say 5ft 0" depth of water
S028 Well, bailing out water, 5ft -7" dia. up to 21ft to 30ft depth
including cleaning well. say 5ft 0" depth of water
S029 Well, bailing out water, 8ft -10ft dia. and 20ft -30ft depth. say 5ft 0"
depth of water
S030 Dewatering from excavated foundation pits or Trenches using
submersible pump.
Water proofing (Treatment)
S031 Concrete waterproofing treatment by using Crystallization technology
according to Manufacturers specification's. ("Xypex" or equivalent
approved product including preparation of surface)
S032 Waterproofing treatment using cement based, micro-porous
(breathing), coating according to Manufacturers Specifications.
("Thoroseal" or equivalent approved product including preparation
of surface),
This BSR is for Maintenance works only

S07- 108

Item
Unit

BSR Rate
2016

L.ft

L.ft

L.ft

L.ft

L.ft

246

Nos

1,500

Nos

1,832

Nos

9,015

L.ft
Nos

366
666

L.ft

495

L.ft

286

L.ft

381

L.ft

477

Day

1,233

sq.ft

118

sq.ft

107

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

S033 Waterproofing treatment by using flexible polymer cement slurry


according to Manufacturers specification's. ("Masterseal
540"(Barralastic) or equivalent approved product including
preparation of surface)
S034 Waterproofing and crack isolation membrane type treatment to slab
less than 300m2 according to Manufacturers specification's.
("Mapelastic" or equivalent approved product including preparation
of surface)
S035 Waterproofing treatment to external walls by using acrylic elastomeric
high flexible bituminous coating according to Manufacturers
specification's. ("Synroof" or equivalent approved product including
preparation of surface)
Water proofing (Membrane)
S036 Supply & Laying 1000 gauge Polythene membrane.
Timber treatment
S037 Structural Timber treated by Vacuum Pressure Impregnation
Technique with approved wood preservatives such as CCB that are
registered by register of pesticides, for protection against wood
destroying agents such as wood bores, fungi and termites. (Execution
according to the Manufacturers specifications) (By "Finlay Celurised
treated " or equivalent system) Rate per Cubic Foot = Rs. 311.61/inc VAT
S038 Supplying and fixing PVC step nosing to stairway step edges using
approved adhesive.
Landscaping
Laying turf sods
S039 Supplying & laying turf sods of approved type including bedding
material, pegging and watering. (buffalo grass)
Road Construction
S040 Supplying and pilling approved 4" aggregate for road construction, at
site excluding hire charges.
S041 Supplying and pilling approved 1 1/2" aggregate for road
construction, at site excluding hire charges.
S042 Supplying and pilling approved 3/4" aggregate for road construction,
at site excluding hire charges.
S043 Supplying and pilling approved 1/2" aggregate for road construction,
at site excluding hire charges.
S044 Spreading ,watering & rolling 4" aggregate including hire charges of
roller.
S045 Spreading ,watering & rolling 2"- 3/4" aggregate including hire
charges of roller.
S046 Bitumen(80/100) surfacing first coat using 2Ltr/Sq.m including
blinding with sand at the rate of 125 Sq.m/Cu.m.
S047 Bitumen(80/100) surfacing 2 nd subsequent coat using 1 Ltr/Sq.m
including blinding at the rate of 125 Sq.m/Cu.m
This BSR is for Maintenance works only

S07- 109

Item
Unit

BSR Rate
2016

sq.ft

121

sq.ft

210

sq.ft

119

sq.ft

14

Cu.ft

381

L.ft

126

sq.ft

59

Cube

Deleted

Cube

Deleted

Cube

Deleted

Cube

Deleted

Cube

Deleted

Cube

Deleted

Sqr

Deleted

Sqr

Deleted

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

S048 Emulsion /Cold bitumen (CRS-1) surface treatment 1st coat with 3.5
Ltr/Sq.m including blinding with sand,@125 Sq.m/Cu.m(Manual)
S049 Emulsion /Cold bitumen (CRS-1) surface treatment subsequent coat
using 0.075 Ltr/Sq.m including blinding with sand,@125
Sq.m/Cu.m(Manual)
Providing Labour Services
S050 Providing Labour services in Un Skilled trades of any type of manual
work on day work basis.
S051 Providing Labour services in semi Skilled trades, on day work basis.
S052 Providing Labour services in Skilled trades such as Mason, Carpenter,
Bar bender ,Painter, polisher, Plumber, Simple Machines operator etc.
on day work basis.
S053 Providing Labour services in Skilled trades such as Fitter, Electrician,
Welder, Tiller, Glazier, Tinker, Mechanic, Aluminium fabricator,
Heavy equipment operator, Sign board Painter etc. on day work basis.

S054
S055
S056
S057
S058

S059

S060

S061

Flagging
Cords, woven, or picture, supplied and fixed.
Cords, flag, 1/4" dia. supplied and fixed.
Cords, flag mast, 3/8" dia. supplied and fixed.
Cords, flag mast, 1/2" dia. supplied and fixed.
Flags, average size 6ft x 3ft hung up on buildings as directed and
removed when required. (Flags available - any poles used are to be
paid for separately)
Flags, small (Burges) hung up on buildings as directed and removed
when required. (Flags available - any poles used are to be paid for
separately) (up to 100)
Flags, small (Burges) hung up on buildings as directed and removed
when required. (Flags available - any poles used are to be paid for
separately) (over 1000)
Flag poles (available) planted as directed removed when required, and
ground made good.

This BSR is for Maintenance works only

S07- 110

Item
Unit

BSR Rate
2016

Sqr

Deleted

Sqr

Deleted

Day
Day

953
1,080

Day

1,207

Day

1,334

L.ft
L.ft
L.ft
L.ft

20
23
22
23

Nos

60

Nos

Nos

Nos

75

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

T-ELECTRICAL INSTALLATIONS
Recommended makes of Electrical Accessories
MCCB:- Schneider, ABB, Terasaki, Siemens or equivalent.
MCBS & RCCBS:- Schneider , Siemens, Crabtree, Eaton,
Hager, Moeller, Legrand, F & G (Austria) or equivalent.
Cable :- ACL, Kelani, Sierra or equivalent.
Ceiling Fan:- K.D.K., National-Japanese origins
Exhaust Fan:- K.D.K., National-Japanese origins
Switch & socket outlet :- Tenby, Clipsal, MK, Crabtree, PDL,
Kevilton, Orange or Equivalent.
Fluorescent Lamp:- The choke, starter and capacitor should be of
good Quality. British, French, Australia, German or equivalent
And the tube should be preferably Thorn, Osram National Or
equivalent. The fluorescent fittings should be fabricated In gauge
not smaller than 24 SWG Zinc coated metal, Finished with power
coating (white in colour).
Distribution Board:- Shall be in surface mount metal enclosure
fabricated With Zinc coated sheet metal of gauge not less than 1.8
mm total enclosed, with hinged door with protective cover plate for
terminals, finished with powder coating of approved colour and
components as specified in the BOQ.
Energy Saving Bulbs:- 4 star rated.
Recommended Fabricators of Switch boards and Enclosures.
Elsteel
K.I.K. Lanka (Pvt) Ltd
Pubudu Engineering (pvt) Ltd
Richardsons Projects (pvt) Ltd
Bentota Power Generators (Pvt) Ltd
OS Project (Pvt) Ltd. (Orange)
Or similar product

This BSR is for Maintenance works only

S07- 111

Item
Unit

BSR Rate
2016

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

T001
T002
T003
T004
T005
T006

T007
T008
T009

T010
T011
T012
T013
T014
T015

T016
T017
T018

T019
T020

Description

In PVC conduit
Point wiring to be carried out with 2x1mm2 Cu/PVC/PVC + 2.5mm2
Cu/PVC earth cable terminated in a 3 terminal ceiling rose and sunk
switch, wired in concealed conduit in wall and above ceiling to be
supplied and installed to working order.
Lamp point wiring
Water tight lamp point wiring
Indoor Bracket lamp point wiring
Stair way lamp point wiring controlled by 2 No. two way switches
Ceiling fan point wiring complete with hook and sunk switch
5 AMP switch socket outlet
In PVC conduit
wiring to be carried out with 2x 2.5mm2 PVC/PVC/CU + 2.5mm2
PVC/CU earth cable wired in concealed conduit in wall and above
ceiling to be supplied and installed to working order
13 AMP switch socket outlet
15 AMP switch socket outlet
15 AMP switch socket outlet c/w 20A DP Switch with Neon Indicator
Lamp
In PVC Casing
Point wiring to be carried out with 2x1mm2 + Cu/PVC/PVC + 2.5
mm2 Cu/PVC earth cable terminated in a 3 terminal ceiling rose and
sunk switch, wired with PVC casing on wall and on soffit to be
supplied and installed to working order.
Lamp point wiring
Water tight lamp point wiring
Indoor Bracket lamp point wiring
Stair way Lamp point wiring controlled by 2 No. two way switches.
Ceiling fan point wiring complete with fan hook and sunk switch.
5 AMP switch socket outlet
In PVC Casing
Wiring to be carried out with 2x2.5mm2 Cu/PVC/PVC + 2.5mm2
Cu/PVC earth cable wired in PVC casing on wall, soffit and above
ceiling to be supplied and installed to working order
13 AMP switch socket outlet (Radial Circuit)
15 AMP switch socket outlet
15 AMP switch socket outlet c/w 20A DP
Distribution Boards
Supply, Wiring and Installation of distribution board in surface mount
plastic enclosure with the undermentioned switch gears to working
order.
2 way SP & N Distribution board complete with 30AMP 2P MCB and
40A 2P RCD(30mA)
4 way SP & N Distribution board complete with 30AMP 2P MCB and
40A 2P RCD(30mA)

This BSR is for Maintenance works only

S07- 112

Item
Unit

BSR Rate
2016

Nos
Nos
Nos
Nos
Nos
Nos

2,847
3,035
2,940
4,691
3,006
3,181

Nos
Nos

4,542
5,440

Nos

7,288

Nos
Nos
Nos
Nos
Nos
Nos

3,386
3,575
3,479
5,549
3,545
3,702

Nos
Nos
Nos

5,109
6,144
9,279

Nos

9,879

Nos

11,072

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

T021 6 way SP & N Distribution board complete with 30AMP 2P MCB and
40A 2P RCD(30mA)
T022 8 way SP & N Distribution board complete with 30AMP 2P MCB
and 40A 2P RCD(30mA)
T023 10 way SP & N Distribution board complete with 30AMP 2P MCB
and 40A 2P RCD(30mA)
T024 12 way SP & N Distribution board complete with 30AMP 2P MCB
and 40A 2P RCD(30mA)
T025 2 way SP & N Distribution board complete with 60AMP 2P MCB and
60A 2P RCD(30mA)
T026 4 way SP & N Distribution board complete with 60AMP 2P MCB and
60A 2P RCD(30mA)
T027 6 way SP & N Distribution board complete with 60AMP 2P MCB and
60A 2P RCD(30mA)
T028 8 way SP & N Distribution board complete with 60AMP 2P MCB
and 60A 2P RCD(30mA)
T029 10 way SP & N Distribution board complete with 60AMP 2P MCB
and 60A 2P RCD(30mA)
T030 12 way SP & N Distribution board complete with 60AMP 2P MCB
and 60A 2P RCD(30mA)
T031 Supplying and Installation of 2 way TP & N Distribution board
complete with 60 A 4P MCB and 2 No. 32 A 3P MCB (10kA) in
surface mount plastic enclosure.
T032 Supplying and Installation of 4 way TP & N Distribution board
complete with 60 A 4P MCCB and 4 No. 16 A 3P MCB type 3 in
surface mount metal enclosure.
T033 Supplying and Installation of 2 way TP & N Distribution board
complete with 100 A 4P MCCB and 2 No. 30/60AMP 3P MCCB in
surface mount metal enclosure.
T034 Supplying and Installation of 4 way TP & N Distribution board
complete with 125 A 4P MCCB and 4 No. 30/60AMP 3P MCCB in
surface mount metal enclosure.
T035 Supplying and Installation of 20-100AMP 4P MCCB in surface mount
metal enclosure
T036 Supplying and Installation of 40AMP 2P isolator complete with plastic
enclosure.
T037 Supplying and Installation of 60AMP 2P isolator complete with plastic
enclosure.
T038 Supplying and Installation of 40AMP 4P isolator complete with plastic
enclosure.
T039 Supplying and Installation of 60AMP 4P isolator complete with plastic
enclosure.
T040 Supplying and Installation of 40AMP 2P RCCB (30mA) complete
plastic enclosure.

This BSR is for Maintenance works only

S07- 113

Item
Unit

BSR Rate
2016

Nos

12,836

Nos

14,285

Nos

16,563

Nos

18,012

Nos

12,829

Nos

14,022

Nos

16,043

Nos

17,749

Nos

19,770

Nos

20,963

Nos

18,750

Nos

36,568

Nos

52,557

Nos

82,689

Nos

19,974

Nos

2,662

Nos

3,175

Nos

5,364

Nos

5,697

Nos

5,522

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

T041 Supplying and Installation of 60AMP 2P RCCB (30mA) complete


plastic enclosure.
T042 Supplying and Installation of 40AMP 4P RCCB (30mA) complete
plastic enclosure.
T043 Supplying and Installation of 60AMP 4P RCCB (30mA) complete
plastic enclosure.
Cabling in conduits
Cable shall be PVC/PVC/CU unless other wise specified to be
supplied and installed in conduit to working order.
T044 2x1 sq. mm + 2.5 sq. mm E cable
T045 2x2.5 sq. mm + 2.5 sq. mm E cable
T046 2x4 sq. mm + 2.5 sq. mm E cable
T047 2x6 sq. mm + 6 sq. mm E cable
T048 2x10 sq. mm + 10 sq. mm E cable
T049 2x16 sq. mm + 16 sq. mm E cable
T050 2x25 sq. mm + 16 sq. mm E cable
T051 4x2.5 sq. mm + 2.5 sq. mm E cable
T052 4x4 sq. mm + 4 sq. mm E cable
T053 4x6 sq. mm + 6 sq. mm E cable
T054 4x10 sq. mm +10 sq. mm E cable
T055 4x16 sq. mm +16 sq. mm E cable
T056 4x25 sq. mm +16 sq. mm E cable
T057 4x35 sq. mm +16 sq. mm E cable
Unarmored Cabling
Cable shall be Cu/PVC/PVC OR Cu/XLPE/Cu supplied and installed
in conduit or pressure pipe (type 1000) to working order.
T058 2C Cu/PVC/PVC 1.5 sq. mm + 2.5 sq. mm E cable
T059 2C Cu/PVC/PVC 2.5 sq. mm + 2.5 sq. mm E cable
T060 2C Cu/PVC/PVC 4 sq. mm + 4 sq. mm E cable
T061 2C Cu/PVC/PVC 6 sq. mm + 6 sq. mm E cable
T062 2C Cu/PVC/PVC 10 sq. mm + 10 sq. mm E cable
T063 2C Cu/PVC/PVC 16 sq. mm + 16 sq. mm E cable
T064 2C Cu/PVC/PVC 25 sq. mm + 16 sq. mm E cable
T065 4C Cu/XLPE/PVC 10 sq. mm + 10 sq. mm E cable
T066 4C Cu/XLPE/PVC 16 sq. mm + 16 sq. mm E cable
T067 4C Cu/XLPE/PVC 25 sq. mm + 16 sq. mm E cable
T068 4C Cu/XLPE/PVC 35 sq. mm + 16 sq. mm E cable
T069 4C Cu/XLPE/PVC 50 sq. mm + 25 sq. mm E cable
T070 4C Cu/XLPE/PVC 70 sq. mm + 35 sq. mm E cable
Armored Cabling
Cable shall be Cu/XLPE/SWA/PVC (BS 5467 : 1997 600/1000V)
supplied and installed in cable tile with necessary accessories &
materials to working order.
T071 4C Cu/XLPE/SWA/PVC 25 sq. mm
T072 4C Cu/XLPE/SWA/PVC 35 sq. mm
This BSR is for Maintenance works only

S07- 114

Item
Unit

BSR Rate
2016

Nos

7,228

Nos

9,545

Nos

12,111

M
M
M
M
M
M
M
M
M
M
M
M
M
M

220
387
566
850
1,337
2,085
2,920
613
939
1,348
2,255
3,238
4,717
6,466

M
M
M
M
M
M
M
M
M
M
M
M
M

582
755
1,391
1,807
2,466
3,463
4,379
3,587
4,670
5,914
6,931
9,566
13,363

M
M

6,729
7,934

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

T073
T074
T075
T076
T077
T078
T079
T080
T081
T082
T083
T084
T085
T086
T087
T088
T089
T090
T091
T092

T093

Description

4C Cu/XLPE/SWA/PVC 50 sq. mm
4C Cu/XLPE/SWA/PVC 70 sq. mm
4C Cu/XLPE/SWA/PVC 95 sq. mm
4C Cu/XLPE/SWA/PVC 120 sq. mm
4C Cu/XLPE/SWA/PVC 150 sq. mm
Cabling in PVC Casing
2x1 sq. mm + 2.5 sq. mm E cable
2x2.5 sq. mm + 2.5 sq. mm E cable
2x4 sq. mm + 2.5 sq. mm E cable
2x6 sq. mm + 6 sq. mm E cable
2x10 sq. mm +10 sq. mm E cable
2x16 sq. mm +16 sq. mm E cable
2x25 sq. mm +16 sq. mm E cable
4x2.5 sq. mm + 2.5 sq. mm E cable
4x4 sq. mm + 4 sq. mm E cable
4x6 sq. mm + 6 sq. mm E cable
4x10 sq. mm + 10 sq. mm E cable
4x16 sq. mm + 16 sq. mm E cable
4x25 sq. mm + 16 sq. mm E cable
4x35 sq. mm + 16 sq. mm E cable
Earth Electrode
Supplying and Installation of earth Electrode 50 mm dia. Of 2 LM to
working order complete with forming of a gulley around the pipe.
Luminaries and Fixtures
Supplying and Installation of Luminaries and fixtures complete with all
fixing accessories, G.I. Chains cup hook 2/3 core cable, connector
suspension holder etc. to working order.
Pendent Lamp C/W 250 mm dia. Conical plastic shade and 15W CFL
bulb
Prime Cost of, 250mm dia plastic conical shade =Rs.75

T094 Pendent Lamp C/W 200 mm dia. Glass globe and 15W CFL bulb
Prime Cost of, 200mm dia glass globe=Rs.415

BSR Rate
2016

M
M
M
M
M

10,384
13,586
18,160
21,851
26,902

M
M
M
M
M
M
M
M
M
M
M
M
M
M

293
448
672
914
1,359
2,032
3,045
713
1,067
1,571
2,478
3,470
4,870
6,433

Nos

5,900

Nos

966

150071

Nos

1,340

150075

T095 Indoor Bracket lamp C/W 200mm dia. Opal white glass globe & 11W
CFL bulb
Prime Cost of, Bracket lamp=Rs.1450

Nos

2,588

150076

T096 Water tight bracket lamp C/W 200mm dia. Clear aerylic globe & 15W
CFL bulb(4 star rated)
Prime Cost of, Water tight bracket lamp=Rs.2250

T097 Recessed fluorescent lamp fitting 1200mmx600mm complete with


polished Aluminium double parabolic louver and 2X36W bulb
Prime Cost of, Recessed fluorescent fitting c/w all (2 x 36w bulb) accessories as
specified above. Size 1200mm x 600 mm=Rs.9950

T098 Recessed fluorescent lamp fitting 1200mmx600mm complete with


polished Aluminium double parabolic louver and 3X36W bulb
Prime Cost of, Recessed fluorescent fitting c/w all (3 x 36w bulb) accessories as
specified above. Size 1200mm x 600mm.=Rs.11950

This BSR is for Maintenance works only

Item
Unit

S07- 115

Nos

3,571

150077

Nos

13,362

150080

Nos
150081

15,966

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

T099 Recessed fluorescent lamp fitting 600mmx600mm complete with


polished Aluminium double parabolic louver and 4X18W bulb
Prime Cost of, Recessed fluorescent fitting c/w all (4 x 18w bulb) accessories as
specified above. Size 600mm x 600 mm=Rs.9000

T100 Recessed fluorescent lamp fitting 600mmx600mm complete with


polished Aluminium double parabolic louver and 3X18W bulb
Prime Cost of, Recessed fluorescent fitting c/w all (3 x 18w bulb) accessories as
specified above. Size 600mm x 600mm=Rs.6100

Item
Unit

BSR Rate
2016

Nos

12,126

150082

Nos

8,351

150083

T101 Fluorescent lamp fitting 1200mm single batten type with 1X36W bulb
Nos
Prime Cost of, Fluorescent lamp fitting c/w all accessories as specified (batten type with
1 x 36w bulb) 1200mm long=Rs.3000

T102 Fluorescent lamp fitting 1200mm single totally encased suspension


type with 1X36W bulb
Prime Cost of, Fluorescent lamp fitting c/w all accessories as specified (totally encased
suspension type with 1 x 36w bulb) 1200mm long=Rs.4000

T103 Fluorescent lamp fitting 600mm single totally encased suspension type
with 1X18W bulb
Prime Cost of, Fluorescent lamp fitting c/w all accessories as specified (totally encased
suspension type with 1 x 18w bulb) 600mm long.=Rs.1062

T104 Fluorescent lamp fitting 1200mm single complete with prismatic


diffuser and 1X36W bulb suspension type

150084

Nos

Nos

Nos

T105 Fluorescent lamp fitting 600mm single complete with prismatic


diffuser and 1X18W bulb suspension type

Nos

Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 1 x 18w bulb) 600mm long. =Rs.700

150088

T106 Fluorescent lamp fitting 1200mm twin complete with prismatic


diffuser and 2X36W bulb suspension type

Nos

Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 2 x 36w bulb) 1200mm long. =Rs.2732

150089

T108 Fluorescent lamp fitting 1200mm twin industrial type c/w 2X36W bulb
(suspension type)
Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 2 x 36w bulb) 1200mm long. =Rs.2732

T109 Fluorescent lamp fitting 600mm single industrial type c/w 1X18W
bulb (suspension type)
Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 1 x 18w bulb) 600mm long. =Rs.700

T110 Recessed Down light fitting complete with 150mm dia. Polished
Aluminium reflector and 20W CFL bulb
Prime Cost of, Down light fitting=Rs.1650

Nos

2,199

1,240

3,885

2,199

150087

Nos

3,885

150089

Nos

1,240

150088

Nos

3,126

150092

T111 Ceiling lamp fitting C/W 200mm dia. Half spherical glass globe and
18W CFL bulb
Prime Cost of, Ceiling lamp fitting=Rs.1800

This BSR is for Maintenance works only

1,799

150086

150087

Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 1 x 36w bulb) 1200mm long. =Rs.1366

5,628

150085

Prime Cost of, Fluorescent lamp fitting c/w all accessories (Prismatic diffuser,
suspension type with 1 x 36w bulb) 1200mm long. =Rs.1366

T107 Fluorescent lamp fitting 1200mm single industrial type c/w 1X36W
bulb (suspension type)

4,214

Nos
150093

S07- 116

3,145

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

T112 Bulk head lamp water tight C/W 18W CFL bulb (4 star rated)
Prime Cost of, Bulk head lamp fitting=Rs.1900

T113
T114
T115

T116
T117
T118
T119
T120
T121
T122
T123
T124
T125
T126

T127
T128
T129
T130

T131

T132
T133
T134
T135

Switch socket outlet


Switch socket outlet 5AMP/13Amp/15AMP to be supplied and
installed complete with screws etc. to working order. (Excluding wires
& conduits)
5 AMP switch socket outlet
13 AMP switch socket outlet
15 AMP switch socket outlet
Replacing sunk switch
Replacing sunk switch complete with plastic sunk box to be supplied
and installed to working order.
Replacing 1 gang sunk switch
Replacing 2 gang sunk switch
Replacing 3 gang sunk switch
Replacing 4 gang sunk switch
Replacing 5 gang sunk switch
Replacing fan regulator dimmer type
Replacing Ceiling fan regulator
Replacing 20 AMP DP switch with Neon indicator
Replacing sunk Bell push
Replacing Cell Bell Ding Dong type excluding wires
Fans
Supply & Installation of Ceiling fan 1400mm dia. Complete with 3
speed regulator (Excluding wiring)
Exhaust Fans
Supply & Installation of 200mm dia. Exhaust fan with auto shutter
(K.D.K or equivalent) (Excluding wiring)
Supply & Installation of 250mm dia. Exhaust fan with auto shutter
(K.D.K or equivalent) (Excluding wiring)
Supply & Installation of 300mm dia. Exhaust fan with auto shutter
(K.D.K or equivalent) (Excluding wiring)
Supply & Installation of 450mm dia. Exhaust fan with auto shutter
(K.D.K or equivalent) (Excluding wiring)
Wall Fans
Supply & Installation of wall fan 450mm dia. Complete with 3 speed
regulator (Excluding wiring)
Fluorescent Lamp
Supply & Installation of fluorescent lamp components to working
order
20W/40W Choker
20W/40W starter
Capacitor 2.5-3.5MF
Fluorescent bulb 36W

This BSR is for Maintenance works only

S07- 117

Item
Unit

BSR Rate
2016

Nos

3,377

150094

Nos
Nos
Nos

726
759
921

Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos

366
500
676
949
1,141
1,256
1,456
1,666
576
2,397

Nos

11,147

Nos

7,844

Nos

8,629

Nos

9,545

Nos

10,918

Nos

11,966

Nos
Nos
Nos
Nos

695
219
509
244

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

T136
T137
T138
T139
T140
T141

T142
T143
T144
T145
T146
T147
T148
T149
T150
T151
T152
T153
T154
T155
T156
T157
T158
T159
T160
T161
T162
T163
T164
T165
T166
T167
T168

Description

Conduit Pipe
Supplying & installation of conduit pipe clipped in surface
18mm conduit pipe
20mm conduit pipe
25mm conduit pipe
30mm conduit pipe
40mm conduit pipe
50mm conduit pipe
PVC Casing
Supplying and Installation of PVC casing
10mmx20mm PVC Casing
14mmx24mm PVC Casing
16mmx40mm PVC Casing
25mmx40mm PVC Casing
50mmx25mm PVC Casing
50mmX50mm PVC Box Casing
50mmX75mm PVC Box Casing
100mmX50mm PVC Box Casing
100mmx27mm PVC Box Casing
Commissioning Wires
2x1 sq. mm Cu/PVC/PVC Cable
2 x 2.5 sq. mm Cu/PVC/PVC Cable
2 x 4 sq. mm Cu/PVC/PVC Cable
2 x 6 sq. mm Cu/PVC/PVC Cable
2 x 10 sq. mm Cu/PVC/PVC Cable
2 x 16 sq. mm Cu/PVC/PVC Cable
2 x 25 sq. mm Cu/PVC/PVC Cable
2 x 35 sq. mm Cu/PVC/PVC Cable
Commissioning Earth Wires
2.5 sq. mm Cu/PVC Earth cable
4 sq. mm Earth Wire
6 sq. mm Cu/PVC Earth cable
10 sq. mm Cu/PVC Earth cable
16 sq. mm Cu/PVC Earth cable
25 sq. mm Earth Wire
35 sq. mm Earth Wire
50 sq. mm Earth Wire
SUPPLY & INSTALLATION OF DOL STARTER
Supplying & installation of DOL STARTER single phase
Supplying & installation of DOL STARTER three phase

This BSR is for Maintenance works only

S07- 118

Item
Unit

BSR Rate
2016

M
M
M
M
M
M

87
87
102
223
315
374

M
M
M
M
M
M
M
M
M

130
88
182
237
282
428
501
622
520

M
M
M
M
M
M
M
M

129
293
405
617
955
1,490
2,307
3,082

M
M
M
M
M
M
M
M

137
221
310
472
700
1,155
1,563
2,042

Nos
Nos

20,365
25,519

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U001

U002

U003

U004

U005

U006

U007

Description

U-ALUMINIUM FABRICATOR
Boards and Glass Pans
One Side Fabric Pasted 3mm thick Ply Wood Boards for
Partitions
Supplying & Fabricating of Panel Boards consist of fabric cloths
(Alabama or equivalent.) and sponge sheets pasted on one side of the
ply wood board (3mm thick) and fix to existing partition frame work.
(Rate Exclusive of Aluminium beadings, necessary rubber beadings,
fasteners & etc.
Both Sides Fabric Pasted 3mm thick Ply Wood Boards for
Partitions, Doors or Windows
Supplying & Fabricating of Panel Boards consist of fabric cloths
(Alabama or equivalent.) and sponge sheets pasted on BOTH sides of
the ply wood board (3mm thick) and fix to existing partition frame
work. (Rate Exclusive of Aluminium beadings, necessary rubber
beadings, fasteners & etc.
PVC Laminated Ply Board for Partitions, Doors or Windows
Supplying, Fabricating and Fixing 3mm thick PVC Laminated Ply
Boards to existing partition frame work. (Rate Exclusive of
Aluminium beadings, necessary rubber beadings, fasteners & etc.)
One Side Coloured Al. Composite Cladding Boards for Partitions
only
Supplying, Fabricating & Fixing of 4mm thick Al. Composite Cladding
Boards (One side Coloured) to existing partition frame work. (Rate
Exclusive of Aluminium beadings, necessary rubber beadings,
fasteners & etc.)
One Side Coloured Al. Composite Cladding Boards for Doors and
Windows
Supplying, Fabricating & Fixing of 4mm thick Al. Composite Cladding
Boards (One side Coloured) to existing door or window frame work
with necessary rubber beadings.
Both Sides Coloured Al. Composite Cladding Boards for
Partitions only
Supplying, Fabricating & Fixing of 4mm thick Al. Composite Cladding
Boards in SINGLE SIDE of the existing partition frame work. (Rate
Exclusive of Aluminium beadings, necessary rubber beadings,
fasteners & etc.)
Both Sides Coloured Al. Composite Cladding Boards for Doors
and Windows
Supplying, Fabricating & Fixing of 4mm thick Al. Composite Cladding
Boards in SINGLE SIDE of the existing door or window frame work
with necessary rubber beadings.

This BSR is for Maintenance works only

S07- 119

Item
Unit

BSR Rate
2016

sq.ft

194

sq.ft

322

sq.ft

63

sq.ft

298

sq.ft

328

sq.ft

345

sq.ft

375

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U008

U009

U010

U011

U012

U013

U014

U015

U016

U017
U018
U019
U020
U021

Description

Clear Glass 5mm thick for Partitions only


Supplying and Fixing of 5mm thick clear glass pan to existing partition
frame work. (Rate Exclusive of Aluminium beadings, necessary rubber
beadings, fasteners & etc.)
Clear Glass 5mm thick for Doors and Windows
Supplying and Fixing of 5mm thick clear glass pan to existing door or
window frame work with necessary rubber beadings.
Float Glass 5mm thick for Partitions only
Supplying and Fixing of 5mm thick float glass pan to existing partition
frame work. (Rate Exclusive of Aluminium beadings, necessary rubber
beadings, fasteners & etc.)
Float Glass 5mm thick for Doors and Windows
Supplying and Fixing of 5mm thick float glass pan to existing door or
window frame work with necessary rubber beadings.
Tinted Glass 5mm thick for Partitions only
Supplying and Fixing of 5mm thick tinted glass pan to existing
partition frame work. (Rate Exclusive of Aluminium beadings,
necessary rubber beadings, fasteners & etc.)
Tinted Glass 5mm thick for Doors and Windows
Supplying and Fixing of 5mm thick tinted glass pan to existing door
or window frame work with necessary rubber beadings.
Clear Glass 6mm thick for Partitions only
Supplying and Fixing of 6mm thick clear glass pan to existing partition
frame work. (Rate Exclusive of Aluminium beadings, necessary rubber
beadings, fasteners & etc.)
Clear Glass 6mm thick for Doors and Windows
Supplying and Fixing of 6mm thick clear glass pan to existing door or
window frame work with necessary rubber beadings.
Sand Blast Stickers
Supplying cutting and pasting of sand blast stickers in position.
Note: Refer figures for more details
Typical Aluminium Louvers
Aluminium Louvers with Louver Frame (52.5mm high 34.6mm
wide Louver blades; Alumex DG 01 or equivalent)
Supplying, Fabricating and Fixing 1.2mm thick 52.5mm high 34.6mm
wide Louver blades (Alumex DG 01 or equivalent) to 20.0 X 37.0mm
louver frame (Alumex DG 101 or equivalent) and fix to existing door,
window or partition frame work including necessary accessories.
Matt Finished Louver blades
Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades

This BSR is for Maintenance works only

S07- 120

Item
Unit

BSR Rate
2016

sq.ft

142

sq.ft

172

sq.ft

146

sq.ft

176

sq.ft

176

sq.ft

206

sq.ft

146

sq.ft

176

sq.ft

106

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,003
1,069
1,110
1,220
1,691

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

940
1,042
1,060
1,183
1,488

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,327
1,475
1,502
1,683
2,206

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,356
1,422
1,449
1,629
2,204

Aluminium Louvers with Louver Frame (60.0mm high 28.5mm


wide Louver blades; Alumex DG 03 or equivalent)
Supplying, Fabricating and Fixing 1.2mm thick 60.0mm high 28.5mm
wide Louver blades (Alumex DG 03 or equivalent) to 17.0 X 31.0mm
louver frame (Alumex DG 103 or equivalent) and fix to existing door,
window or partition frame work including all accessories.
U022
U023
U024
U025
U026

U027
U028
U029
U030
U031

U032
U033
U034
U035
U036

Matt Finished Louver blades


Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades
Aluminium Louvers with Louver Frame (34.5mm high 28.5mm
wide symmetrical "Y" type Louver blades; Alumex DG 04 or
equivalent)
Supplying, Fabricating and Fixing 1.2mm thick 34.5mm high 28.5mm
wide symmetrical "Y" type Louver blades (Alumex DG 04 or
equivalent) to 17.0 X 31.0mm louver frame (Alumex DG 103 or
equivalent) and fix to existing door, window or partition frame work
including all accessories.
Matt Finished Louver blades
Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades
Aluminium Louvers (39.5mm high 37.4mm wide asymmetrical
"Y" type Louver blades; Alumex DG 06 or equivalent) with
Louver Frame
Supplying, Fabricating and Fixing 1.2mm thick 39.5mm high 37.4mm
wide asymmetrical "Y" type Louver blades (Alumex DG 06 or
equivalent) to 17.0 X 40.0mm louver frame (Alumex DG 104 or
equivalent) and fix to existing door, window or partition frame work
including all accessories.
Matt Finished Louver blades
Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades

This BSR is for Maintenance works only

S07- 121

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

924
978
995
1,118
1,510

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

2,900
3,230
3,291
3,876
4,414

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

5,365
5,806
5,914
6,797
7,753

Aluminium Louvers (120.0mm high 37.4mm wide Louver blades;


Alumex DG 05 or equivalent) with Louver Frame
Supplying, Fabricating and Fixing 1.5mm thick 120.0mm high 37.4mm
wide Louver blades (Alumex DG 05 or equivalent) to 17.0 X 40.0mm
louver frame (Alumex DG 104 or equivalent) and fix to existing door,
window or partition frame work including all accessories
U037
U038
U039
U040
U041

U042
U043
U044
U045
U046

U047
U048
U049
U050
U051

Matt Finished Louver blades


Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades
Aluminium SUN Louvers with Louver Frame (Alumex ALU 180
or equivalent)
Supplying, Fabricating and Fixing 1.5mm thick 107.3mm high 26.0mm
wide sun Louver blades (Alumex ALU-180 or equivalent) to 25.0 X
125.0mm louver frame (Alumex ALU-181 or equivalent) and fix to
existing frame or wall. (Fix to existing frame or wall with accessories
paid separately)
Matt Finished Louver blades
Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades
Aluminium SUN Louvers (Alumex ALU 180 or equivalent) with
BIRD'S MOUTH BRACKETS (Alumex ALU 282 or equivalent)
Supplying, Fabricating and Fixing 1.5mm thick 107.3mm high 26.0mm
wide sun Louver blades (Alumex ALU-180 or equivalent) to Bird's
mouth brackets (Alumex ALU-282 or equivalent) and fix to existing
frame, Door, Window or wall with all accessories.
Matt Finished Louver blades
Natural Anodized Louver blades
Bronze Anodized Louver blades
Powder Coated Louver blades
Wood Finished Louver blades

This BSR is for Maintenance works only

S07- 122

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

332
343
346
363
425

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

458
482
489
520
650

Single Row Aluminium Partition Frame Work with Boards/Glass


Single row Aluminium Partition Frame Work(1.2mm thick ) with
Fully Board Panels (max. Height 1200mm)
Supplying, Fabricating and Installing of single row frame work with
FULLY BOARDED panels in both sides for ALUMINIUM
PARTITION consist of 1.2mm thick,76mm deep (width 23.0mm)
(Alumex or eq.) Aluminium extrusions. And GI channel stiffener frame
work enclosed in Aluminium frame work with an appropriate grid
pattern not exceeding 1200mm in both vertical & horizontal directions
suited to the available space and additional GI channel bracings placed
in 600mm centers at vertical direction. Rate inclusive of Aluminium
beadings (including necessary rubber beadings) necessary fasteners
etc. (PANNLE BOARDS PAID SEPERATLY) - Refer U001 to U016 for
glass & boards, U017 to U051 for louvers-

U052
U053
U054
U055
U056

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Single row Aluminium Partition Frame Work(1.2mm thick )
Fully Glass Pans (max. Height 1200mm)
Supplying, Fabricating and Installing single row panel frame work
with Fully Glass ALUMINIUM PARTITION consist of 1.2mm thick,
76mm deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions
to form an appropriate grid pattern not exceeding 1200mm in both
vertical & horizontal directions, suited to the available space consist of
glass pans. Rate inclusive of Aluminium beadings (including necessary
rubber beadings) necessary fasteners etc. (GLASS PANS PAID
SEPERATLY) - Refer U001 to U016 for glass & boards, U017 to U051 for
louvers-

U057
U058
U059
U060
U061

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 123

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Single Row Aluminium Partition Frame Work with Louvers


Single Row Aluminium Partition Frame Work (1.2mm thick)
Fully Louvered (max. Height 1200mm)
Supplying, Fabricating and Installing single row panel FULLY
ALUMINIUM LOUVER PARTITION with 1.2mm thick, 76mm deep
(width 23.0mm) (Alumex or eq.) Aluminium extrusions to form an
appropriate grid pattern not exceeding 1200mm in both vertical &
horizontal directions, suited to the available space and consist of
Aluminium louver framed panel. Rate inclusive of Aluminium beadings
(including necessary rubber beadings) necessary fasteners etc.
(SUPPLY & FIXING OF LOUVER BLADES WITH CAGE PAID
SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to U051 for
louvers-

U062
U063
U064
U065
U066

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2 Row Aluminium Partition Frame Work with Boards/Glass
Two Row Compiled Aluminium Partition Frame Work (1.2mm
thick) Fully Board Panels (max. height 2400mm)
Supplying, Fabricating and Installing two rows of panel frame work
with FULLY BOARDED panels in both sides for(Top & Bottom
rows) ALUMINIUM PARTITION consist of 1.2mm thick, 76mm
deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions. And GI
channel stiffener frame work enclosed in Aluminium frame work with
an appropriate grid pattern not exceeding 1200mm in both vertical &
horizontal directions suited to the available space and additional GI
channel bracings placed in 600mm centers at vertical direction. Rate
inclusive of Aluminium beadings (including necessary rubber beadings)
necessary fasteners etc. (PANEL BOARDS PAID SEPERATLY) Refer U001 to U016 for glass & boards, U017 to U051 for louvers -

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

353
368
372
392
487

U067
U068
U069
U070
U071

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

294
303
305
320
364

This BSR is for Maintenance works only

S07- 124

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

323
335
338
354
420

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

410
431
437
464
576

Two Row Compiled Aluminium Partition Frame Work (1.2mm


thick) - One Row with Boards & other Row with Glass Pans
(max. height 2400mm)
Supplying, Fabricating and Installing GLASS & BOARD two rows of
panel ALUMINIUM PARTITION frame work with 1.2mm thick,
76mm deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions.
And one row consist of BOAD panels in both sides of the partition
frame work and GI channel stiffener frame work enclosed in
appropriate grid pattern not exceeding 1200mm in both vertical &
horizontal directions, suited to the available space and additional GI
channel bracings to be placed in 600mm centers at vertical direction
and other row consist of glass pans, span not exceeding 1200mm in
both directions. Rate inclusive of Aluminium beadings (including
necessary rubber beadings) necessary fasteners etc. (GLASS PANS &
PANEL BOARDS PAID SEPERATLY) - Refer U001 to U016 for glass
& boards, U017 to U051 for louvers-

U072
U073
U074
U075
U076

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Two Row compiled Aluminium Partition Frame Work (1.2mm
thick) - with Fully Glass Pans
Supplying, Fabricating and Installing two rows of panel frame work
with Fully Glass pans for (Top & Bottom rows) ALUMINIUM
PARTITION consist of 1.2mm thick, 76mm deep (width 23.0mm)
(Alumex or eq.) Aluminium extrusions to form an appropriate grid
pattern not exceeding 1200mm in both vertical & horizontal
directions, suited to the available space. Rate inclusive of Aluminium
beadings (including necessary rubber beadings) necessary fasteners
etc. (GLASS PANS PAID SEPERATLY) - Refer U001 to U016 for glass
& boards, U017 to U051 for louvers-

U077
U078
U079
U080
U081

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 125

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

299
309
312
325
382

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

355
371
375
395
484

2 Row Aluminium Partition Frame Work with Louvers &


Boards/Glass
Two Row compiled Aluminium Partition Frame Work (1.2mm
thick)-One Row with Louvers and other Row with Boards (max.
height 2400mm)
Supplying, Fabricating and Installing of LOUVER & BOARD two
rows of panels ALUMINIUM PARTITION frame work with 1.2mm
thick, 76mm deep (width 23.0mm) (Alumex or eq.) Aluminium
extrusions, One row consist of BOARD panels in both sides of the
partition frame work and GI channel stiffener frame work enclosed in
Aluminium frame, with appropriate grid pattern not exceeding
1200mm in both vertical & horizontal directions, suited to the
available space and additional GI channel bracings placed in 600mm
centers at vertical direction. Other row consists of LOUVER framed
panels. Rate inclusive of Aluminium beadings (including necessary
rubber beadings) necessary fasteners etc. (SUPPLY & FIXING OF
LOUVER BLADES WITH CAGE & PANEL BOARDS PAID
SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to U051 for
louvers-

U082
U083
U084
U085
U086

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Two Row compiled Aluminium Partition Frame Work (1.2mm
thick)-One Row with Louvers and other Row with Glass (max.
height 2400mm)
Supplying, Fabricating and Fixing LOUVER & GLASS two rows of
panels ALUMINIUM PARTITION frame work with 1.2mm thick,
76mm deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions
to form an appropriate grid pattern not exceeding 1200mm in both
vertical & horizontal directions, suited to the available space and one
row consist of glass pans. Other row consists of LOUVER framed
panels. Rate inclusive of Aluminium beadings (including necessary
rubber beadings) necessary fasteners etc. (SUPPLY & FIXING OF
LOUVER BLADES WITH CAGE & GLASS PANS PAID
SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to U051 for
louvers-

U087
U088
U089
U090
U091

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 126

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

306
318
321
336
410

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

314
323
326
341
383

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

396
417
421
450
488

Two Row compiled Aluminium Partition Frame Work (1.2mm


thick) - Fully Louvered (max. height 2400mm)
Supplying, Fabricating and Fixing 2 rows of panel FULLY Aluminium
LOUVER Partition with 1.2mm thick, 76mm deep (width 23.0mm)
(Alumex or eq.) Aluminium extrusions to form an appropriate grid
pattern not exceeding 1200mm in both vertical & horizontal
directions, suited to the available space and both rows consist of
Aluminium louver framed panels. Rate inclusive of Aluminium
beadings (including necessary rubber beadings) necessary fasteners
etc. (SUPPLY & FIXING OF LOUVER BLADES WITH CAGE
PAID SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to
U051 for louvers-

U092
U093
U094
U095
U096

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
3 Row Aluminium Partitions
3 Row Compiled Aluminium Partition Frame Work (max. height
3600mm) - with Fully Board
Supplying, Fabricating and Installing 3 Row Compiled panel frame
work with FULLY BOARDED panels in both sides for (Top middle
& Bottom rows); ALUMINIUM PARTITION consist of 1.2mm
thick, 76mm deep (width 23.0mm) (Alumex or eq.) Aluminium
extrusions and GI channel stiffener frame work enclosed in Aluminium
frame work with an appropriate grid pattern, span not exceeding
1200mm in both vertical & horizontal directions suited to the available
space and additional GI channel bracings placed in 600mm centers at
vertical direction. Rate inclusive of Aluminium beadings (including
necessary rubber beadings) necessary fasteners etc. (PANEL
BOARDS PAID SEPERATLY) - Refer U001 to U016 for glass & boards,
U017 to U051 for louvers-

U097
U098
U099
U100
U101

U102
U103
U104
U105
U106

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick,100mm depth (width 50.0mm) (Alumex or eq.)
Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 127

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

345
357
360
378
440

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

492
524
530
572
626

3 Row Compiled Aluminium Partition Frame Work - 2 Rows


with Boards & Other Row with Glass Pans (max. height
3600mm)
Supplying, Fabricating and Installing GLASS & BOARD 3 row
Compiled panel ALUMINIUM PARTITION frame work with 1.2mm
thick, 76mm deep (width 23.0mm) (Alumex or eq.) Aluminium
extrusions. And two rows consist of BOAD panels in both sides of the
partition frame work and GI channel stiffener frame work enclosed in
appropriate grid pattern, span not exceeding 1200mm in both vertical
& horizontal directions, suited to the available space and additional GI
channel bracings placed in 600mm centers at vertical direction. Other
row consists of glass pans, span not exceeding 1200mm in both
directions. Rate inclusive of Aluminium beadings (including necessary
rubber beadings) necessary fasteners etc. (GLASS PANS & PANEL
BOARDS PAID SEPERATLY) - Refer U001 to U016 for glass & boards,
U017 to U051 for louvers-

U107
U108
U109
U110
U111

U112
U113
U114
U115
U116

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick,100mm depth (width 50.0mm) (Alumex or eq.)
extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 128

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

372
386
389
407
481

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

570
611
618
670
734

sq.ft

450

3 Row Compiled Aluminium Partition Frame Work - 1 Row with


Boards & Other 2 Rows with Glass Pans (max. height 3600mm)
Supplying, Fabricating and Installing GLASS & BOARD 3 row
Compiled panel ALUMINIUM PARTITION frame work with 1.2mm
thick, 76mm deep (width 23.0mm) (Alumex or eq.) Aluminium
extrusions. And one row consists of BOAD panels in both sides of the
partition frame work and GI channel stiffener frame work enclosed in
appropriate grid pattern, span not exceeding 1200mm in both vertical
& horizontal directions, suited to the available space and additional GI
channel bracings placed in 600mm centers at vertical direction. Other
two rows consist of glass pans, span not exceeding 1200mm in both
directions. Rate inclusive of Aluminium beadings (including necessary
rubber beadings) necessary fasteners etc. (GLASS PANS & PANEL
BOARDS PAID SEPERATLY) - Refer U001 to U016 for glass & boards,
U017 to U051 for louvers-

U117
U118
U119
U120
U121

U122
U123
U124
U125
U126

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
3 Row Compiled Aluminium Partition Frame Work - (max.
height 3600mm) fully Glass Panels
Supplying, Fabricating and Installing 3 Row Compiled panel frame
work with FULLY GLAZE pans for (Top middle & Bottom rows)
ALUMINIUM PARTITION consist of 1.2mm thick, 76mm deep
(width 23.0mm) (Alumex or eq.) Aluminium extrusions and glass
pans, to form an appropriate grid pattern, span not exceeding 1200mm
in both vertical & horizontal directions suited to the available space.
Rate inclusive of Aluminium beadings (including necessary rubber
beadings) necessary fasteners etc. (GLASS PANS PAID
SEPERATLY) - Refer U001 to U016 for glass & boards, U017 to U051 for
louvers-

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


extrusions
U127 Matt Finished Aluminium extrusion frame work
This BSR is for Maintenance works only

S07- 129

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U128
U129
U130
U131

U132
U133
U134
U135
U136

Description

Natural Anodized Aluminium extrusion frame work


Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
3 Panel Aluminium Louver Partitions
3 Row Compiled Aluminium Partition Frame Work - (max.
height 3600mm) one row with Louvers, Another row With
Boards & Remaining row with Glass.
Supplying, Fabricating and Fixing 3 Row Compiled panel frame work
with GLASS, BOARD & ALUMINIUM LOUVER PARTITION
consist of 1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)
Aluminium extrusions. And one row consists of BOAD panels in both
sides of the partition frame work and GI channel stiffener frame work
enclosed in appropriate grid pattern, span not exceeding 1200mm in
both vertical & horizontal directions, suited to the available space and
additional GI channel bracings placed in 600mm centers at vertical
direction. Another row consists of necessary LOUVER framed panels
& remaining row consists of glass pans suited to the available space.
Rate inclusive of Aluminium beadings (including necessary rubber
beadings) necessary fasteners etc. (SUPPLY & FIXING OF LOUVER
BLADES WITH CAGE, GLASS PANS & PANEL BOARDS PAID
SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to U051 for

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft

470
477
502
610

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

745
805
815
891
985

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

316
328
331
347
416

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

499
537
544
591
651

louvers-

U137
U138
U139
U140
U141

U142
U143
U144
U145
U146

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 130

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

285
294
297
309
361

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

415
443
447
483
528

3 Row Compiled Aluminium Partition Frame Work - (max.


height 3600mm) one row with Louvers, Remaining two rows with
Boards.
Supplying, Fabricating and Fixing 3 Row Compiled panel frame work
with BOARD & ALUMINIUM LOUVER PARTITION consist of
1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)
Aluminium extrusions. And two rows consist of BOAD panels in both
sides of the partition frame work and GI channel stiffener frame work
enclosed in appropriate grid pattern, span not exceeding 1200mm in
both vertical & horizontal directions, suited to the available space and
additional GI channel bracings placed in 600mm centers at vertical
direction. Other remaining row consists of necessary LOUVER
framed panels. Rate inclusive of Aluminium beadings (including
necessary rubber beadings) necessary fasteners etc. (SUPPLY &
FIXING OF LOUVER BLADES WITH CAGE & PANEL BOARDS
PAID SEPERATELY) - Refer U001 to U016 for glass & boards, U017 to
U051 for louvers-

U147
U148
U149
U150
U151

U152
U153
U154
U155
U156

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work

This BSR is for Maintenance works only

S07- 131

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

356
373
377
398
489

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

608
659
667
731
811

sq.ft
sq.ft

295
307

3 Row Compiled Aluminium Partition Frame Work - (max.


height 3600mm) one row with Louvers, Remaining two rows with
Glass.
Supplying, Fabricating and Fixing LOUVER & GLASS 3 Row
Compiled panel Aluminium Partition frame work with 1.2mm thick,
76mm deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions
to form an appropriate grid pattern, span not exceeding 1200mm in
both vertical & horizontal directions, suited to the available space.
Two rows consist of glass pans. Other row consists of LOUVER
panel frame with appropriate grid pattern suited to glass panels. Rate
inclusive of Aluminium beadings (including necessary rubber beadings)
necessary fasteners etc. (SUPPLY & FIXING OF LOUVER
BLADES WITH CAGE & GLASS PANS PAID SEPERATELY) Refer U001 to U016 for glass & boards, U017 to U051 for louvers-

U157
U158
U159
U160
U161

U162
U163
U164
U165
U166

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
Aluminium extrusions
Matt Finished Aluminium extrusion frame work
Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
3 Row Compiled Aluminium Partition Frame Work - (max.
height 3600mm) Fully Louvered.
Supplying, Fabricating and Fixing 3 Row Compiled panel FULLY
ALUMINIUM LOUVERED PARTITION with 1.2mm thick, 76mm
deep (width 23.0mm) (Alumex or eq.) Aluminium extrusions to form
an appropriate grid pattern, span not exceeding 1200mm in both
vertical & horizontal directions, suited to the available space and all
rows consist of Louvers enclosed with Aluminium louver frame. Rate
inclusive of Aluminium beadings (including necessary rubber beadings)
necessary fasteners etc. (SUPPLY & FIXING OF LOUVER
BLADES WITH LOUVER FRAME PAID SEPERATELY) - Refer
U001 to U016 for glass & boards, U017 to U051 for louvers-

1.2mm thick, 76mm deep (width 23.0mm) (Alumex or eq.)


Aluminium extrusions
U167 Matt Finished Aluminium extrusion frame work
U168 Natural Anodized Aluminium extrusion frame work
This BSR is for Maintenance works only

S07- 132

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U169 Bronze Anodized Aluminium extrusion frame work


U170 Powder Coated Aluminium extrusion frame work
U171 Wood Finished Aluminium extrusion frame work
2.0mm thick, 100mm depth (width 50.0mm) (Alumex or eq.)
Aluminium extrusions
U172 Matt Finished Aluminium extrusion frame work
U173 Natural Anodized Aluminium extrusion frame work
U174 Bronze Anodized Aluminium extrusion frame work
U175 Powder Coated Aluminium extrusion frame work
U176 Wood Finished Aluminium extrusion frame work
Aluminium 76mm Shop front
Supplying, Fabricating and Installing 1.2 mm thick,76mmAluminium
Shop front, frame work fixed as an appropriate grid pattern not
exceeding 1200mm in both vertical & horizontal directions, suit to the
available space including necessary rubber beadings, fasteners etc.
(SUPPLY & FIXING OF LOUVERS, GLASS PANS OR PANNLE
BOARDS PAID SEPERATELY) - Refer U001 to U016 for glass &

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft

310
325
398

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

498
539
546
597
660

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

433
451
456
488
598

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

576
619
631
678
806

sq.ft

1,046

boards, U017 to U051 for louvers-

U177
U178
U179
U180
U181

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Aluminium 100mm Shop front
Supplying, Fabricating and Fixing 1.5 mm thick,100mmAluminium
Shop front, frame work fixed as an appropriate grid pattern, span not
exceeding 1200mm in both vertical & horizontal directions, suit to the
available space including necessary rubber beadings, fasteners etc.
(SUPPLY & FIXING OF LOUVERS, GLASS PANS OR PANNLE
BOARDS PAID SEPERATELY) - Refer U001 to U016 for glass &
boards, U017 to U051 for louvers-

U182
U183
U184
U185
U186

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Aluminium Curtain Wall (2.0mm thick)
Supplying, Fabricating and Fixing Aluminium Curtain Wall with
2.0mm thick,98mm depth extrusions, frame work fixed as an
appropriate grid pattern, span not exceeding 1200mm in both vertical
& horizontal directions, suit to the available space including necessary
rubber beadings, fasteners etc. (SUPPLY & FIXING OF LOUVERS,
GLASS PANS OR PANNLE BOARDS PAID SEPERATELY) Refer U001 to U016 for glass & boards, U017 to U051 for louvers-

U187 Matt Finished Aluminium extrusion frame work


This BSR is for Maintenance works only

S07- 133

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U188
U189
U190
U191

Description

Natural Anodized Aluminium extrusion frame work


Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Aluminium Curtain Wall (1.5mm thick)
Supplying, Fabricating and Fixing Aluminium Curtain Wall with
1.5mm thick,85mm depth extrusions, frame work fixed as an
appropriate grid pattern, span not exceeding 1200mm in both vertical
& horizontal directions, suit to the available space including necessary
rubber beadings, fasteners etc. (SUPPLY & FIXING OF LOUVERS,
GLASS PANS OR PANNLE BOARDS PAID SEPERATELY) -

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft

1,147
1,167
1,291
1,633

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

697
754
772
827
984

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,127
1,195
1,209
1,291
1,549

Refer U001 to U016 for glass & boards, U017 to U051 for louvers-

U192
U193
U194
U195
U196

Matt Finished Aluminium extrusion frame work


Natural Anodized Aluminium extrusion frame work
Bronze Anodized Aluminium extrusion frame work
Powder Coated Aluminium extrusion frame work
Wood Finished Aluminium extrusion frame work
Aluminium doors
Aluminium Double Sashed Swing Door (sash only) for 1.6mm
thick 100mm Deep Door Frames
Supplying, Fabricating and Installing of Aluminium Double sashed
Swing Door (sash only) for 1.6mm thick 100mm deep door frames
with suitable wool felt. Rate inclusive of necessary fasteners and
hinges (Union or equivalent 102x76x2 mm) etc.( Glass/ Board, Door
closers, door locks and door handles paid separately) (Alumex
extrusion Nos. 100D-102, 100D-103, 100D-201, 100D-301, 100D401, 100D-501 or equivalent) -Refer U001 to U016 for glass & boards,
U017 to U051 for louvers, U743-U764 for accessories, U207-U241 for outer
frame-

U197
U198
U199
U200
U201

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 134

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,145
1,214
1,227
1,312
1,567

L.ft
L.ft
L.ft
L.ft
L.ft

784
825
836
920
1,006

L.ft
L.ft
L.ft
L.ft
L.ft

885
962
976
1,071
1,268

Aluminium Single Sashed Swing Door (sash only) for 1.6mm


thick 100mm Deep Door Frames
Supplying, Fabricating and Installing of Aluminium Single sashed
Swing door (sash only) for 1.6mm 100mm deep door frames with
suitable wool felt. Rate inclusive of necessary fasteners and hinges
(Union or equivalent 102x76x2 mm) etc.( Glass/ Board/ Louver
Panels, Door closers, door locks and door handles paid separately)
door sash only.(Alumex extrusion No's 100D-101, 100D-103, 100D201, 100D-301, 100D-401, 100D-501 or equivalent) -Refer U001 to
U016 for glass & boards, U017 to U051 for louvers, U743-U764 for accessories,
U207-U241 for outer frame-

U202
U203
U204
U205
U206

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Door Outer frames
Outer Door Frame (Frame Only) with1.6mm thick 100mm deep
Extrusion for Aluminium Double Sashed Swing Door
Supplying, Fabricating and Installing 1.6mm thick 45mm X 100mm
(depth) Aluminium outer door frame for double sash Swing door. Rate
inclusive of necessary fasteners and etc.( Door sashes, Door closers,
door locks and door handles paid separately) (Alumex extrusion No.
100D-3004H or equivalent) -Refer U001 to U016 for glass & boards, U017
to U051 for louvers, U743-U764 for accessories, U197-U206 for door sash-

U207
U208
U209
U210
U211

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Outer Door Frame (Frame Only) with1.5mm thick 100mm deep
Extrusion for Aluminium Single Sashed Swing Door
Supplying, Fabricating and Installing 1.5mm thick 45mmX100mm
(depth) Aluminium Single sashed Swing door outer frame only. Rate
inclusive of necessary fasteners and etc.( Door sashes, Door closers,
door locks and door handles paid separately) (Alumex extrusion No.
100D-3005 or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories, U197-U206 for door sash-

U212
U213
U214
U215
U216

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 135

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

L.ft
L.ft
L.ft
L.ft
L.ft

578
599
606
655
714

L.ft
L.ft
L.ft
L.ft
L.ft

717
773
794
846
1,087

L.ft
L.ft
L.ft
L.ft
L.ft

539
563
570
618
748

Outer Door Frame (Frame Only) with 1.2mm thick 76mm deep
Extrusion for Aluminium Single Sash Swing door
Supplying, Fabricating and Installing 1.2mm thick 45mmX76.2mm
(depth) Aluminium Single sashed Swing door outer frame only. Rate
inclusive of necessary fasteners and etc.( Door sashes, Door closers,
door locks and door handles paid separately) (Alumex extrusion No.
76D-3102 or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories, U197-U206 for door sash-

U217
U218
U219
U220
U221

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Outer Door Frame (Frame Only) with 1.5mm thick 100mm Deep
SHOP FRONT Aluminium Extrusions
Supplying, Fabricating and Installing 1.5mm thick 100mm (depth)
Aluminium Swing door outer frame for SHOP FRONT. Rate inclusive
of necessary fasteners and etc.( Door sashes, Door closers, door locks
and door handles paid separately) (Alumex extrusion Nos. SPR-205,
SPR-211or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories, U197-U206 for door sash-

U222
U223
U224
U225
U226

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Outer Door Frame (Frame Only) with 1.2mm thick 76mm Deep
SHOP FRONT Aluminium Extrusions
Supplying, Fabricating and Installing 1.2mm thick 76mm (depth)
Aluminium Swing door outer frame for SHOP FRONT. Rate inclusive
of necessary fasteners and etc.( Door sashes, Door closers, door locks
and door handles paid separately) (Alumex extrusion Nos. SPR-105,
SPR-211 or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories, U197-U206 for door sash-

U227
U228
U229
U230
U231

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 136

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

L.ft
L.ft
L.ft
L.ft
L.ft

551
571
575
604
734

L.ft
L.ft
L.ft
L.ft
L.ft

549
586
593
639
774

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

804
870
883
964
1,191

Outer Door Frame (Frame Only) with 1.2mm thick 76mm Deep
Partition Frame Aluminium Extrusions
Supplying, Fabricating and Installing 1.2mm thick 76mm (depth)
Aluminium Swing door outer frame with Aluminium Partition
extrusions. Rate inclusive of necessary fasteners and etc.( Door sashes,
Door closers, door locks and door handles paid separately) (Alumex
extrusion Nos. PT-5159 or equivalent) -Refer U001 to U016 for glass &
boards, U017 to U051 for louvers, U743-U764 for accessories, U197-U206 for
door sash-

U232
U233
U234
U235
U236

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Outer Door Frame (Frame Only) with 1.2mm thick 76mm Deep
Aluminium Extrusion for Single Sash Plywood door
Supplying, Fabricating and Installing 1.2mm thick 76mm (depth)
Aluminium door outer frame for single sashed plywood door. Rate
inclusive of necessary fasteners and etc.( Door sashes, Door closers,
door locks and door handles paid separately) (Alumex extrusion Nos.
76D-3101 or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories, H069-H072 for plywood door-

U237
U238
U239
U240
U241

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium Sliding Doors
80mm (1.5 mm thick) Aluminium Sliding Door (Undivided plane
Paneled Sashes)
Supplying, Fabricating and Installing 1.5mm thick 33.7mmX80mm
(depth) Aluminium framed two sliding door sashes (Undivided plane
Paneled Sashes) with suitable rubber beadings, necessary fasteners,
rollers & etc.( Glass pans or panel boards, Door closers, door locks
and door handles paid separately) (Alumex extrusion Nos. 80S-2001,
80S-2002, 80S2101 and etc. or equivalent) -Refer U001 to U016 for glass
& boards, U017 to U051 for louvers, U743-U764 for accessories-

U242
U243
U244
U245
U246

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 137

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

805
875
888
973
1,194

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

824
893
907
1,103
1,173

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

929
959
962
1,070
1,290

80mm (1.5 mm thick) Aluminium Sliding Door (Undivided plane


Paneled Sashes) with top fixed panels
Supplying, Fabricating and Installing 1.5mm thick 33.7mmX80mm
(depth) Aluminium framed two sliding door sashes (Undivided plane
Paneled Sash) with top fixed panels. Rate to include for suitable
rubber beadings, necessary fasteners, rollers & etc.( Glass pans or
panel boards, Door closers, door locks and door handles paid
separately) (Alumex extrusion Nos. 80S-2001, 80S-2002, 80S2101
and etc. or equivalent) -Refer U001 to U016 for glass & boards, U017 to
U051 for louvers, U743-U764 for accessories-

U247
U248
U249
U250
U251

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.5 mm thick) Aluminium Sliding Door (Undivided plane
Paneled Sashes)
Supplying, Fabricating and Installing 1.5mm thick 30mmX98mm
(depth) Aluminium framed one half fixed & Single Sliding Door sash
(Undivided plane Paneled Sashes) with suitable rubber beadings,
necessary fasteners, rollers & etc.( Glass pans or panel boards, Door
closers, door locks and door handles paid separately) (Alumex
extrusion Nos. SD-1001, DS-1101, SD1501 and etc. or equivalent) Refer U001 to U016 for glass & boards, U017 to U051 for louvers, U743-U764
for accessories-

U252
U253
U254
U255
U256

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.5 mm thick) Aluminium Sliding Door (Undivided plane
Paneled Sashes) with top fixed panel
Supplying, Fabricating and Installing 1.5mm thick 30mmX98mm
(depth) Aluminium framed one half fixed & Single Sliding Door sash
(Undivided plane Paneled Sashes) with top fixed panels. Rate to
include for suitable rubber beadings, necessary fasteners, rollers &
etc.( Glass pans or panel boards, Door closers, door locks and door
handles paid separately) (Alumex extrusion Nos. SD-1001, DS-1101,
SD1501 and etc. or equivalent) -Refer U001 to U016 for glass & boards,
U017 to U051 for louvers, U743-U764 for accessories-

U257
U258
U259
U260
U261

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 138

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

920
1,000
1,016
1,114
1,321

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

922
997
1,013
1,104
1,345

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

776
776
787
860
1,035

100mm (1.5 mm thick) Aluminium Sliding Door (Sashes Divided


to two Panels)
Supplying, Fabricating and Installing 1.5mm thick 30mmX98mm
(depth) Aluminium framed one half fixed & Single Sliding Door sash
(Sashes Divided to two Panels) with suitable rubber beadings,
necessary fasteners, rollers & etc.( Glass pans or panel boards, Door
closers, door locks and door handles paid separately) (Alumex
extrusion Nos. SD-1001, DS-1101, SD1501 and etc. or equivalent) Refer U001 to U016 for glass & boards, U017 to U051 for louvers, U743-U764
for accessories-

U262
U263
U264
U265
U266

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.5 mm thick) Aluminium Sliding Door (Sashes Divided
to two Panels) with top fixed panel
Supplying, Fabricating and Installing 1.5mm thick 30mmX98mm
(depth) Aluminium framed one half fixed & Single Door sash (Sashes
Divided to two Panels) with top fixed panels. Rate to include for
suitable rubber beadings, necessary fasteners, rollers & etc.( Glass
pans or panel boards, Door closers, door locks and door handles paid
separately) (Alumex extrusion Nos. SD-1001, DS-1101, SD1501 and
etc. or equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for
louvers, U743-U764 for accessories-

U267
U268
U269
U270
U271

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
80mm (1.5 mm thick) Aluminium 3 track Sliding Door
(Undivided plane Paneled Sashes)
Supplying, Fabricating and Installing 1.5mm thick 33.7mmX119.5mm
(depth) Aluminium framed 80mm 3 track (one sash fixed & other two
sliding) sliding Door sashes (Undivided plane Paneled Sashes) with
suitable rubber beadings, necessary fasteners, rollers & etc.( Glass
pans or panel boards, Door closers, door locks and door handles paid
separately) (Alumex extrusion Nos. 80S-2001A, SS-2101, 80SFL1001 and etc. or equivalent) -Refer U001 to U016 for glass & boards, U017
to U051 for louvers, U743-U764 for accessories-

U272
U273
U274
U275
U276

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 139

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

794
858
870
950
1,134

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

854
879
910
998
1,115

sq.ft
sq.ft
sq.ft
sq.ft

962
1,017
1,032
1,135

80mm (1.5 mm thick) Aluminium 3 track Sliding Door (Sashes


Divided to two Panels)
Supplying, Fabricating and Installing 1.5mm thick 33.7mmX119.5mm
(depth) Aluminium framed 80mm 3 track (one sash fixed & other two
sliding) sliding Door sashes (Sashes Divided to two Panels) with
suitable rubber beadings, necessary fasteners, rollers & etc.( Glass
pans or panel boards, Door closers, door locks and door handles paid
separately) (Alumex extrusion Nos. 80S-2001A, SS-2101, 80SFL1001 and etc. or equivalent) -Refer U001 to U016 for glass & boards, U017
to U051 for louvers, U743-U764 for accessories-

U277
U278
U279
U280
U281

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.6 mm thick) Aluminium 3 track Sliding Door
(Undivided plane Paneled Sashes)
Supplying, Fabricating and Installing 1.6mm thick 35mmX146.5mm
(depth) Aluminium framed 100mm 3 track (one sash fixed & other
two sliding) sliding Door sashes (Undivided plane Paneled Sashes)
with suitable rubber beadings, necessary fasteners, rollers & etc.(
Glass pans or panel boards, Door closers, door locks and door handles
paid separately) (Alumex extrusion Nos. SD-1001A, SD-1101A, SD1302 and etc. or equivalent) -Refer U001 to U016 for glass & boards, U017
to U051 for louvers, U743-U764 for accessories-

U282
U283
U284
U285
U286

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.6 mm thick) Aluminium 3 track Sliding Door
(Undivided plane Paneled Sashes) with top fixed panel
Supplying, Fabricating and Installing 1.5mm thick 35mmX146.5mm
(depth) Aluminium framed 100mm 3 track (one sash fixed & other
two sliding) sliding Door sashes (Undivided plane Paneled Sashes)
with top fixed panel. Rate to include for suitable rubber beadings,
necessary fasteners, rollers & etc.( Glass pans or panel boards, Door
closers, door locks and door handles paid separately) (Alumex
extrusion Nos. SD-1001A, SD-1101A, SD-1302 and etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,
U743-U764 for accessories-

U287
U288
U289
U290

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium

This BSR is for Maintenance works only

S07- 140

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U291 -DO-Wood Finished Aluminium


100mm (1.6 mm thick) Aluminium 3 track Sliding Door (Sashes
Divided to two Panels)
Supplying, Fabricating and Installing 1.6mm thick 35mmX146.5mm
(depth) Aluminium framed 100mm 3 track (one sash fixed & other
two sliding) sliding Door sashes (Sashes Divided to two Panels) with
suitable rubber beadings, necessary fasteners, rollers & etc.( Glass
pans or panel boards, Door closers, door locks and door handles paid
separately) (Alumex extrusion Nos. SD-1001A, SD-1101A, SD1302 and etc. or equivalent) -Refer U001 to U016 for glass & boards, U017

Item
Unit

BSR Rate
2016

sq.ft

1,296

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,001
1,061
1,151
1,184
1,339

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

991
1,049
1,065
1,172
1,341

to U051 for louvers, U743-U764 for accessories-

U292
U293
U294
U295
U296

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.6 mm thick) Aluminium 3 track Sliding Door (Sashes
Divided to two Panels) with top fixed panel
Supplying, Fabricating and Installing 1.6mm thick 35mmX146.5mm
(depth) Aluminium framed 100mm 3 track (one sash fixed & other
two sliding) sliding Door sashes (Sashes Divided to two Panels) with
top fixed panel. Rate to include for suitable rubber beadings, necessary
fasteners, rollers & etc.( Glass pans or panel boards, Door closers,
door locks and door handles paid separately) (Alumex extrusion Nos.
SD-1001A, SD-1101A, SD-1302 and etc. or equivalent) -Refer U001 to
U016 for glass & boards, U017 to U051 for louvers, U743-U764 for accessories-

U297
U298
U299
U300
U301

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
100mm (1.5 mm thick) Aluminium Double Glazed Sliding Door
(Sashes Divided to two Panels)
Supplying, Fabricating and Installing 1.5mm thick 42.5mmX100mm
(depth) Aluminium framed Double Glazed one half fixed & Single
Sliding Door sash (Double Glazed Sashes Divided to two Panels)
with suitable rubber beadings, necessary fasteners, rollers & etc.(
Glass pans or panel boards, Door closers, door locks and door handles
paid separately) (Alumex extrusion Nos. SDG-2001, SDG-2101,
SDG-2401 and etc. or equivalent) -Refer U001 to U016 for glass & boards,
U017 to U051 for louvers, U743-U764 for accessories-

U302
U303
U304
U305

982
1,055
1,072
1,168

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium

This BSR is for Maintenance works only

S07- 141

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

1,356

U306 -DO-Wood Finished Aluminium


100mm (1.5 mm thick) Aluminium Double Glazed Sliding Door
(Sashes Divided to two Panels) with top fixed panel
Supplying, Fabricating and Installing 1.5mm thick 42.5mmX100mm
(depth) Aluminium framed Double Glazed one half fixed & Single
Sliding Door sash (Double Glazed Sashes Divided to two Panels)
with top fixed panels. Rate to include for suitable rubber beadings,
necessary fasteners, rollers & etc.( Glass pans or panel boards, Door
closers, door locks and door handles paid separately) (Alumex
extrusion Nos. SDG-2001, SDG-2101, SDG-2401 and etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,
U743-U764 for accessories-

U307
U308
U309
U310
U311

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium Casement Windows
Casement Window Frames Only
Supplying, Fabricating & Installing of 1.2mm thick 41mm deep
Aluminium Casement window frame only. Rate to include for rubber
beadings, rawl plugs, fasteners etc. Window sash, Fixed Panels,
Louver Panels, hinges, locks paid separately. (Alumex extrusion Nos.
CA-1007, CA-1008 or equivalent) -Refer U001 to U016 for glass & boards,

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

982
1,060
1,077
1,179
1,361

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

418
433
437
469
582

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

508
528
535
573
721

sq.ft
sq.ft
sq.ft
sq.ft

566
587
594
629

U017 to U051 for louvers, U743-U764 for accessories, U647-U676 for window
sashes-

U312
U313
U314
U315
U316

U317
U318
U319
U320
U321

U322
U323
U324
U325

41mm Aluminium Casement Window Frame for Single Sash


(Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Single Sash with
Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Single Sash with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium

This BSR is for Maintenance works only

S07- 142

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U326 -DO-Wood Finished Aluminium


41mm Aluminium Casement Window Frame for Single Sash with
Top and Both Side Fixed Panels
U327 -DO- Matt Finished Aluminium
U328 -DO- Natural Anodized Aluminium
U329 -DO- Bronzed Anodized Aluminium
U330 -DO-Powder Coated Aluminium
U331 -DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Double Sash
(Frame Only)
U332 -DO- Matt Finished Aluminium
U333 -DO- Natural Anodized Aluminium
U334 -DO- Bronzed Anodized Aluminium
U335 -DO-Powder Coated Aluminium
U336 -DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Double Sash
with Top Fixed Panel (Frame Only)
U337 -DO- Matt Finished Aluminium
U338 -DO- Natural Anodized Aluminium
U339 -DO- Bronzed Anodized Aluminium
U340 -DO-Powder Coated Aluminium
U341 -DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Double Sash
with Both Side Fixed Panels (Frame Only)
U342 -DO- Matt Finished Aluminium
U343 -DO- Natural Anodized Aluminium
U344 -DO- Bronzed Anodized Aluminium
U345 -DO-Powder Coated Aluminium
U346 -DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for Double Sash
with Top & Both Side Fixed Panels (Frame Only)
U347 -DO- Matt Finished Aluminium
U348 -DO- Natural Anodized Aluminium
U349 -DO- Bronzed Anodized Aluminium
U350 -DO-Powder Coated Aluminium
U351 -DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 3 Sashes (Frame
Only)
U352 -DO- Matt Finished Aluminium
U353 -DO- Natural Anodized Aluminium
U354 -DO- Bronzed Anodized Aluminium
U355 -DO-Powder Coated Aluminium
U356 -DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 143

Item
Unit

BSR Rate
2016

sq.ft

774

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

501
525
534
573
742

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

393
407
411
440
549

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

455
474
481
516
661

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

389
408
414
447
583

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

480
503
511
548
710

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

375
389
393
421
528

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U357
U358
U359
U360
U361

U362
U363
U364
U365
U366

U367
U368
U369
U370
U371

U372
U373
U374
U375
U376

U377
U378
U379
U380
U381

U382
U383
U384
U385
U386

U387

Description

41mm Aluminium Casement Window Frame for 3 Sashes with


Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 3 Sashes with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 3 Sashes with
Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 4 Sashes (Frame
Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 4 Sashes with
Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 4 Sashes with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
41mm Aluminium Casement Window Frame for 4 Sashes with
Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium

This BSR is for Maintenance works only

S07- 144

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

452
471
478
512
656

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

423
441
446
478
608

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

471
492
500
537
695

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

378
391
395
422
529

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

443
462
469
503
646

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

414
431
436
467
592

sq.ft

464

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U388
U389
U390
U391

Description

-DO- Natural Anodized Aluminium


-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Supplying, Fabricating & Installing of 1.2mm thick 60mm deep
Aluminium Casement window frame only. Rate to include for rubber
beadings, rawl plugs, fasteners etc. Window sash, Fixed Panels,
Louver Panels, hinges, locks paid separately. (Alumex extrusion Nos.
CA 1009 & CA 1010 or equivalent) -Refer U001 to U016 for glass &

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft

485
492
529
684

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

503
538
551
588
738

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

583
623
637
681
861

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

613
649
661
701
867

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

539
579
591
636
821

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

450
480
490
524
657

boards, U017 to U051 for louvers, U743-U764 for accessories, U647-U676 for
window sashes-

U392
U393
U394
U395
U396

U397
U398
U399
U400
U401

U402
U403
U404
U405
U406

U407
U408
U409
U410
U411

U412
U413
U414
U415
U416

60mm Aluminium Casement Window Frame for Single Sash


(Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Single Sash with
Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Single Sash with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Single Sash with
Top & Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Double Sash
(Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 145

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U417
U418
U419
U420
U421

U422
U423
U424
U425
U426

U427
U428
U429
U430
U431

U432
U433
U434
U435
U436

U437
U438
U439
U440
U441

U442
U443
U444
U445
U446

U447

Description

60mm Aluminium Casement Window Frame for Double Sash


with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Double Sash
with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for Double Sash
with Top & Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 3 Sashes (Frame
Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 3 Sashes with
Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 3 Sashes with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 3 Sashes with
Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium

This BSR is for Maintenance works only

S07- 146

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

502
538
550
590
755

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

431
465
476
513
667

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

514
552
563
606
782

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

423
451
460
493
621

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

490
525
535
575
735

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

463
495
505
541
687

sq.ft

501

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U448
U449
U450
U451

U452
U453
U454
U455
U456

U457
U458
U459
U460
U461

U462
U463
U464
U465
U466

U467
U468
U469
U470
U471

Description

-DO- Natural Anodized Aluminium


-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 4 Sashes (Frame
Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 4 Sashes with
Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 4 Sashes with
Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
60mm Aluminium Casement Window Frame for 4 Sashes with
Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Supplying, Fabricating & Installing of 1.2mm thick 70mm deep single
sashed Aluminium Casement window frame only. Rate to include for
rubber beadings, rawl plugs, fasteners etc. Window sash, Fixed Panels,
Louver Panels, hinges, locks paid separately. (Alumex extrusion Nos.
CA 1011 & CA 1012 or equivalent) -Refer U001 to U016 for glass &

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft

538
549
591
761

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

420
448
456
488
614

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

477
511
521
560
717

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

452
483
492
527
669

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

493
529
539
580
747

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

616
662
663
730
935

boards, U017 to U051 for louvers, U743-U764 for accessories, U647-U676 for
window sashes-

U472
U473
U474
U475
U476

70mm (1.2mm thick) Aluminium Casement Window Frame for


Single Sash (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 147

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U477
U478
U479
U480
U481

U482
U483
U484
U485
U486

U487
U488
U489
U490
U491

U492
U493
U494
U495
U496

U497
U498
U499
U500
U501

U502
U503
U504
U505
U506

Description

70mm (1.2mm thick) Aluminium Casement Window Frame for


Single Sash with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for
Single Sash with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for
Single Sash with Top & Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for
Double Sash (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for
Double Sash with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for
Double Sash with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 148

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

707
761
766
837
1,078

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

726
774
783
841
1,061

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

665
717
730
790
1,034

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

563
605
609
664
852

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

628
677
687
746
971

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

545
590
599
653
861

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

641
691
704
762
997

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

536
576
582
633
815

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

617
664
675
731
950

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

576
620
628
681
881

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

629
678
691
747
977

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

534
573
579
628
808

70mm (1.2mm thick) Aluminium Casement Window Frame for


Double Sash with Top & Both Side Fixed Panels (Frame Only)
U507
U508
U509
U510
U511

U512
U513
U514
U515
U516

U517
U518
U519
U520
U521

U522
U523
U524
U525
U526

U527
U528
U529
U530
U531

U532
U533
U534
U535
U536

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 3
Sashes (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 3
Sashes with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 3
Sashes with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 3
Sashes with Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 4
Sashes (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 149

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U537
U538
U539
U540
U541

U542
U543
U544
U545
U546

U547
U548
U549
U550
U551

Description

70mm (1.2mm thick) Aluminium Casement Window Frame for 4


Sashes with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 4
Sashes with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement Window Frame for 4
Sashes with Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Supplying, Fabricating & Installing of 1.5mm thick 70mm deep single
sashed Aluminium Casement window frame only. Rate to include for
rubber beadings, rawl plugs, fasteners etc. Window sash, Fixed Panels,
Louver Panels, hinges, locks paid separately. (Alumex extrusion Nos.
CA 1013,CA 1014 & CA 1015 or equivalent) -Refer U001 to U016 for

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

604
651
662
716
933

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

565
608
616
667
862

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

620
669
682
736
963

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

689
749
760
819
1,034

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

723
784
795
860
1,082

sq.ft
sq.ft

702
752

glass & boards, U017 to U051 for louvers, U743-U764 for accessories, U647U676 for window sashes-

U552
U553
U554
U555
U556

U557
U558
U559
U560
U561

U562
U563

70mm (1.5mm thick) Aluminium Casement Window Frame for


Single Sash (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Single Sash with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Single Sash with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium

This BSR is for Maintenance works only

S07- 150

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U564 -DO- Bronzed Anodized Aluminium


U565 -DO-Powder Coated Aluminium
U566 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Single Sash with Both Side Fixed Panels (Frame Only)
U567 -DO- Matt Finished Aluminium
U568 -DO- Natural Anodized Aluminium
U569 -DO- Bronzed Anodized Aluminium
U570 -DO-Powder Coated Aluminium
U571 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Double Sash (Frame Only)
U572 -DO- Matt Finished Aluminium
U573 -DO- Natural Anodized Aluminium
U574 -DO- Bronzed Anodized Aluminium
U575 -DO-Powder Coated Aluminium
U576 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Double Sash with Top Fixed Panel (Frame Only)
U577 -DO- Matt Finished Aluminium
U578 -DO- Natural Anodized Aluminium
U579 -DO- Bronzed Anodized Aluminium
U580 -DO-Powder Coated Aluminium
U581 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Double Sash with Both Side Fixed Panels (Frame Only)
U582 -DO- Matt Finished Aluminium
U583 -DO- Natural Anodized Aluminium
U584 -DO- Bronzed Anodized Aluminium
U585 -DO-Powder Coated Aluminium
U586 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for
Double Sash with Top & Both Side Fixed Panels (Frame Only)
U587
U588
U589
U590
U591

U592
U593
U594
U595

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 3
Sashes (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium

This BSR is for Maintenance works only

S07- 151

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft

761
807
996

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

609
660
669
723
917

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

618
670
680
729
924

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

626
680
689
746
947

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

536
584
593
638
823

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

593
643
652
704
895

sq.ft
sq.ft
sq.ft
sq.ft

584
634
643
690

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U596 -DO-Wood Finished Aluminium


70mm (1.5mm thick) Aluminium Casement Window Frame for 3
Sashes with Top Fixed Panel (Frame Only)
U597 -DO- Matt Finished Aluminium
U598 -DO- Natural Anodized Aluminium
U599 -DO- Bronzed Anodized Aluminium
U600 -DO-Powder Coated Aluminium
U601 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 3
Sashes with Both Side Fixed Panels (Frame Only)
U602 -DO- Matt Finished Aluminium
U603 -DO- Natural Anodized Aluminium
U604 -DO- Bronzed Anodized Aluminium
U605 -DO-Powder Coated Aluminium
U606 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 3
Sashes with Both Sides and Top Fixed Panels (Frame Only)
U607 -DO- Matt Finished Aluminium
U608 -DO- Natural Anodized Aluminium
U609 -DO- Bronzed Anodized Aluminium
U610 -DO-Powder Coated Aluminium
U611 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 4
Sashes (Frame Only)
U612 -DO- Matt Finished Aluminium
U613 -DO- Natural Anodized Aluminium
U614 -DO- Bronzed Anodized Aluminium
U615 -DO-Powder Coated Aluminium
U616 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 4
Sashes with Top Fixed Panel (Frame Only)
U617 -DO- Matt Finished Aluminium
U618 -DO- Natural Anodized Aluminium
U619 -DO- Bronzed Anodized Aluminium
U620 -DO-Powder Coated Aluminium
U621 -DO-Wood Finished Aluminium
70mm (1.5mm thick) Aluminium Casement Window Frame for 4
Sashes with Both Side Fixed Panels (Frame Only)
U622 -DO- Matt Finished Aluminium
U623 -DO- Natural Anodized Aluminium
U624 -DO- Bronzed Anodized Aluminium
U625 -DO-Powder Coated Aluminium
U626 -DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 152

Item
Unit

BSR Rate
2016

sq.ft

878

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

609
660
669
723
917

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

576
624
633
677
860

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

586
635
644
696
884

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

579
628
637
682
867

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

593
643
652
704
895

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

571
619
627
671
853

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U627
U628
U629
U630
U631

Description

70mm (1.5mm thick) Aluminium Casement Window Frame for 4


Sashes with Both Sides and Top Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium Casement & Pivot Window (Frame Only)
Supplying, Fabricating & Installing of 1.2mm thick 70mm deep single
sashed Matt Finished Aluminium Casement & Pivot window frame
only. Rate to include for rubber beadings, rawl plugs, fasteners etc.
Window sash, Fixed Panels, Louver Panels, hinges, locks paid
separately. (Alumex extrusion Nos. CA-1011,CA-1012 & PV-1001 or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

581
630
639
690
877

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

751
820
841
918
1,156

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

810
885
909
991
1,265

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

766
836
858
933
1,185

U743-U764 for accessories, U647-U676 for window sashes-

U632
U633
U634
U635
U636

U637
U638
U639
U640
U641

U642
U643
U644
U645
U646

70mm (1.2mm thick) Aluminium Casement & Pivot Window


Frame for Single Sash (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement & Pivot Window
Frame for Single Sash with Top Fixed Panel (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement & Pivot Window
Frame for Single Sash with Both Side Fixed Panels (Frame Only)
-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 153

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

724
767
775
829
957

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

844
887
898
967
1,167

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,143
1,223
1,242
1,355
1,616

Casement Window Sash Only


Aluminium Casement Window Sash (Sash Only) for 41mm,
60mm or 70mm (1.2mm tk.) frames
Supplying, Fabricating & Installing of 1.2mm thick 40mm X 35mm
(depth) Aluminium Casement window sash only. Rate to include for
weather strips, casement locks, fasteners etc. Glass pans or Window
panel boards paid separately. (Alumex extrusion No. CA-2005 or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,
U743-U764 for accessories, U677-U741 for window outer frame-

U647
U648
U649
U650
U651

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium Casement Window Sash (Sash Only) for 70mm
(1.5mm tk.) frame work
Supplying, Fabricating & Installing of 1.5mm thick 54.5mm X 35mm
(depth) Aluminium Casement window sash only. Rate to include for
weather strips, casement locks, fasteners etc. Glass pans or Window
panel boards paid separately. (Alumex extrusion No. CA-2007 or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,
U743-U764 for accessories, U677-U741 for window outer frame-

U652
U653
U654
U655
U656

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.5mm tk.) Divided Casement Window Sash Only
Aluminium Casement Divided Window Sash (Sash Divided to 2
portions) for 70mm (1.5mm tk.) frame work
Supplying, Fabricating & Installing of 1.5mm thick 62mm X 35mm
(depth) Aluminium Casement Divided window sash consist of two
portions. Rate to include for weather strips, casement locks, fasteners
etc. Glass pans or Window panel boards paid separately. (Alumex
extrusion Nos. CA-1116, CA-2008 or equivalent) -Refer U001 to U016
for glass & boards, U017 to U051 for louvers, U743-U764 for accessories, U677U741 for window outer frame-

U657
U658
U659
U660
U661

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 154

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,419
1,531
1,557
1,710
2,086

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

1,552
1,681
1,710
1,882
2,316

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

718
784
796
879
982

Aluminium Casement Divided Window Sash (Sash Divided to 4


portions) for 70mm (1.5mm tk.) frame work
Supplying, Fabricating & Installing of 1.5mm thick 62mm X 35mm
(depth) Aluminium Casement Divided window sash consist of 4
portions. Rate to include for weather strips, casement locks, fasteners
etc. Glass pans or Window panel boards paid separately. (Alumex
extrusion Nos. CA-1116, CA-2008 or equivalent) -Refer U001 to U016
for glass & boards, U017 to U051 for louvers, U743-U764 for accessories, U677U741 for window outer frame-

U662
U663
U664
U665
U666

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium Casement Divided Window Sash (Sash Divided to 6
portions) for 70mm (1.5mm tk.) frame work
Supplying, Fabricating & Installing of 1.5mm thick 62mm X 35mm
(depth) Aluminium Casement Divided window sash consist of 6
portions. Rate to include for weather strips, casement locks, fasteners
etc. Glass pans or Window panel boards paid separately. (Alumex
extrusion Nos. CA-1116, CA-2008 or equivalent) -Refer U001 to U016
for glass & boards, U017 to U051 for louvers, U743-U764 for accessories, U677U741 for window outer frame-

U667
U668
U669
U670
U671

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
70mm (1.2mm thick) Aluminium Casement & Pivot Window
Sash Only
Supplying, Fabricating & Installing of 1.5mm thick 42.5mm X 40mm
(depth) Aluminium Casement & Pivot window sash only. Rate to
include for weather strips, casement locks, fasteners etc. Glass pans or
Window panel boards paid separately. (Alumex extrusion No. PV2001 or equivalent) -Refer U001 to U016 for glass & boards, U017 to U051
for louvers, U743-U764 for accessories, U677-U741 for window outer frame-

U672
U673
U674
U675
U676

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 155

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

482
506
512
540
624

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

564
597
605
646
766

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

604
640
650
692
819

Aluminium Sliding windows


1.3mm thick 70mm Aluminium Sliding windows
1.3mm thick 70mm 1 Sash Fixed, Single Sash Aluminium Sliding
window
Supplying, Fabricating & Fixing Aluminium Window 1.3mm thick
,70mm depth Aluminium Framed (max. width 33.4mm) and Signal
sash(max. width 56.2mm) Sliding Window. Glass pans, Window
panel boards or Louver Panels paid separately. (Alumex extrusion No.
70S-1002, 70S-1202 & etc. or equivalent) -Refer U001 to U016 for glass
& boards, U017 to U051 for louvers, U743-U764 for accessories-

U677
U678
U679
U680
U681

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.3mm thick 70mm Double Sashed Aluminium Sliding window
Supplying, Fabricating & Fixing Aluminium window with 1.3mm thick
,70mm depth Aluminium framed (max. width 32.0mm) Double
sash(max. width 36.2mm)Sliding Window including necessary
beadings, sliding lock etc. Glass pans, Window panel boards or
Louver Panels paid separately. (Alumex extrusion No. 70S-1001, 70S1201-1, 70S-1101-1, 70S-1401, 70S-1501, 70S-1601, 70S-1701 &
etc. or equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for
louvers, U743-U764 for accessories-

U682
U683
U684
U685
U686

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.3mm thick 70mm Double Sashed Aluminium Sliding window
with 2 Fixed Panels at Top or Bottom
Supplying, Fabricating & Aluminium Window with 1.3mm thick
.
,70mm depth Aluminium Framed (max width 61.0mm) Double sash
(max. width 56.2mm) Sliding Window with Two fixed panels on top
to the window including necessary beadings, sliding lock etc. Glass
pans, Window panel boards or Louver Panels paid separately.(Alumex
extrusion No. 70S-1012, 70S-1201-1, 70S-1101-1, 70S-1401, 70S1501, 70S-1601, 70S-1701 & etc. or equivalent) -Refer U001 to U016 for
glass & boards, U017 to U051 for louvers, U743-U764 for accessories-

U687
U688
U689
U690
U691

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 156

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

564
598
606
647
762

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

23
626
635
679
791

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

644
688
696
749
892

1.3mm thick 70mm 4 Sashed Aluminium Sliding window


Supplying, Fabricating & Fixing Aluminium Window with 1.3mm
thick ,70mm depth Aluminium Framed (max. width 32.0mm) and
Four Sliding Sashes(max. width 30.0mm) including necessary
beadings, sliding locks etc. Glass pans, Window panel boards or
Louver Panels paid separately.(Alumex extrusion No. 70S-1206, 70S1001-1, 70S-1101-1, 70S-1401, 70S-1501, 70S-1601, 70S-1701 &
etc. or equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for
louvers, U743-U764 for accessories-

U692
U693
U694
U695
U696

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.3mm thick 70mm 4 Sashed Aluminium Sliding window with 4
Sliding Panels at Top or Bottom
Supplying, Fabricating & Fixing Aluminium Window with 1.3mm
thick ,70mm depth Aluminium Framed (max. width 60.0mm) Four
Sliding Sashes(max. width 30.0mm) with Four Sliding panels on Top
or Bottom of the Window including necessary beadings, sliding locks
etc. Glass pans, Window panel boards or Louver Panels paid
separately.(Alumex extrusion No. 70S-1201-1, 70S-1001-1, 70S1006, 70S-1914, 70S-1401, 70S-1501, 70S-1601, 70S-1701 & etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers, U743-U764 for
accessories-

U697
U698
U699
U700
U701

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.5mm thick 80mm Aluminium Sliding window
1.5mm thick 80mm 1 Sash Fixed Single Sash Aluminium Sliding
window
Supplying, Fabricating & Fixing Aluminium Window with 1.5mm
thick ,80mm depth Aluminium Framed (max. width 43.5mm) Signal
Sash (max. width 58.0mm) Sliding Window including necessary
beadings, sliding lock etc. Glass pans, Window panel boards or
Louver Panels paid separately.(Alumex extrusion No. 80S-2001, 80S2601, 80S-2602, 80S-2501, 80S-2102 & etc. or equivalent) -Refer U001
to U016 for glass & boards, U017 to U051 for louvers, U743-U764 for accessories-

U702
U703
U704
U705
U706

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 157

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

758
814
824
894
1,078

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

824
888
900
980
1,187

sq.ft
sq.ft
sq.ft

939
996
1,008

1.5mm thick 80mm Double Sashed Aluminium Sliding window


Supplying, Fabricating & Fixing Aluminium Window 1.5mm thick,
80mm depth Aluminium Framed(max. width 37.6mm) Double
Sash(max. width 58.0mm) Sliding Window including necessary
beadings, sliding lock etc. Glass pans, Window panel boards or
Louver Panels paid separately.(Alumex extrusion No. 80S-2002, 80S2101, 80S-2601, 80S-2501, 80S-2701 & etc. or equivalent) -Refer
U001 to U016 for glass & boards, U017 to U051 for louvers, U743-U764 for
accessories-

U707
U708
U709
U710
U711

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.5mm thick 80mm Double Sashed Aluminium Sliding window
with Fixed Panels at Top or Bottom
Supplying, Fabricating & Fixing Natural Anodized Aluminium
Window with 1.5mm thick, 80mm depth Aluminium Framed (max.
width 48.2mm)and Double Sash (max. width 58.0mm) Sliding
Window with Two fixed panels on top or Bottom to the window
including necessary beadings, sliding lock etc. Glass pans, Window
panel boards or Louver Panels paid separately. (Alumex extrusion No.
80S-2001, 80SFL-1001, 80SFL-1002, 80SFL-1003, 80S-2101, 80S2501, 80S-2601, 80S-2701 & etc. or equivalent) -Refer U001 to U016 for
glass & boards, U017 to U051 for louvers, U743-U764 for accessories-

U712
U713
U714
U715
U716

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.5mm thick 80mm Double Sashed Aluminium Sliding window
with 2 Fixed Panels at Both Sides
Supplying, Fabricating & Fixing Aluminium Window 1.5mm thick,
80mm depth Aluminium Framed (max. width 66.0mm) Double sash
(max. width 55.0mm) Sliding Window with Two fixed panels at sides
of the window including necessary beadings, sliding lock etc. Glass
pans, Window panel boards or Louver Panels paid separately.
(Alumex extrusion No. 80S-2001, 80SFL-1001, 80SFL-2102, 80SFL1003, 80S-2101, 80S-2501, 80S-2601, 80S-2701, 80S-2302 & etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers, U743-U764 for
accessories-

U717 -DO- Matt Finished Aluminium


U718 -DO- Natural Anodized Aluminium
U719 -DO-Bronzed Anodized Aluminium
This BSR is for Maintenance works only

S07- 158

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Item
Unit

BSR Rate
2016

sq.ft
U720 -DO-Powder Coated Aluminium
sq.ft
U721 -DO-Wood Finished Aluminium
1.5mm thick 80mm Double Sashed Aluminium Sliding window
with 2 Top Hang Sashes at Top or Bottom
Supplying, Fabricating & Fixing Aluminium Window 1.5mm thick,
80mm depth Aluminium Framed(max. width 48.2mm) Double sash
(max. width 58.0mm) Sliding Window with Two Hung panel sashes on
top or bottom to the window including necessary beadings, sliding
lock etc. Glass pans, Window panel boards or Louver Panels paid
separately. (Alumex extrusion No. 80S-2001, 80SFL-1001, 80SFL1002, 80SFL-1003, 80S-2101, 80S-2501, 80S-2601, 80S-2701, 80S2101 & etc. or equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for

1,078
1,229

Description

louvers, U743-U764 for accessories-

U722
U723
U724
U725
U726

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.5mm thick 80mm 4 Sashed Aluminium Sliding window with 4
Sashes Sliding Panels at Top or Bottom
Supplying, Fabricating & Fixing Aluminium Window with 1.5mm
.
thick, 80mm depth Aluminium Framed (max width 62.0mm) Four
Sliding Sashes(max. width 58.0mm) with Four Sliding panels on top or
bottom of the Window including necessary beadings, sliding locks etc.
Glass pans, Window panel boards or Louver Panels paid separately.
(Alumex extrusion No. 80S-2001, 80SFL-1001, 80S-2201, 80S2301, 80S-2101, 80S-2501, 80S-2601, 80S-2701, 80S-2101 & etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

900
967
980
1,065
1,291

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

766
824
834
905
1,088

U743-U764 for accessories-

U727
U728
U729
U730
U731

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

This BSR is for Maintenance works only

S07- 159

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

840
907
920
1,002
1,133

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

842
907
919
999
1,181

sq.ft

1,528

1.5mm thick 80mm 4 Sashed Aluminium Sliding window with 2


Fixed Panels at Both Sides
Supplying, Fabricating & Fixing Aluminium Window with 1.5mm
thick ,80mm depth Aluminium Framed (max. width 63.0mm) Four
.
Sliding Sashes(max width 55.0mm) with two fixed panels at both
sides Window including necessary beadings, sliding lock etc. Glass
pans, Window panel boards or Louver Panels paid separately.
(Alumex extrusion No. 80S-2001, 80SFL-1001, 80S-2201, 80S2301, 80S-2101, 80S-2501, 80S-2601, 80S-2701, 80S-2101 & etc. or
equivalent) -Refer U001 to U016 for glass & boards, U017 to U051 for louvers,
U743-U764 for accessories-

U732
U733
U734
U735
U736

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
1.5mm thick 80mm 6 Sashed Aluminium Sliding window
Supplying, Fabricating & Fixing Aluminium Window with 1.5mm
thick ,80mm depth Aluminium Framed (max. width 37.6mm) Six
Sashes Sliding Window(max. width 63.0mm) including necessary
beadings, sliding lock etc. Glass pans, Window panel boards or
Louver Panels paid separately. (Alumex extrusion No. 80S-2001,
80SFL-1001, 80S-2201, 80S-2301, 80S-2101, 80S-2501, 80S-2601,
80S-2701, 80S-2101 & etc. or equivalent) -Refer U001 to U016 for glass
& boards, U017 to U051 for louvers, U743-U764 for accessories-

-DO- Matt Finished Aluminium


-DO- Natural Anodized Aluminium
-DO-Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Aluminium composite cladding
U742 Supplying, fabricating and installing of 4.0mm thick Aluminium
composite cladding panel (Alucobond or equivalent European make)
with open joint tray panel system using non corrosive 50x81x3mm tk.
Aluminium "T" channel section (al 217), non corrosive 50x50x3mm
pressed Aluminium "U" wall bracket sub frame and AL 201 & AL 202
profiles on tray panel, Rate to include for ss nut and bolts, ss screws,
blind rivets, U channels, Nylon resistant, Anchor bolts, and other
necessary accessories. Bird mesh to be provided in side of vent areas,
all complete as per manufacture's specifications.
U737
U738
U739
U740
U741

This BSR is for Maintenance works only

S07- 160

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

Nos

5,791

Door lock for Aluminium Doors


U743 Supplying and Fixing UNION Door lock (No-X 920,X925 or X930)
for Aluminium Door with necessary accessories to working order
Prime Cost of, UNION Door lock (No-X 920,X925 or X930) for Aluminium Door=Rs.4318
100219

U744 Supplying and Fixing Door lock (No-VR50101B) for Aluminium


Door with necessary accessories to working order.
Prime Cost of, Door lock-VR50101B=Rs.5100

Nos

6,784

160001

U745 Supplying and Fixing Door lock (No-VR50101C) for Aluminium


Door with necessary accessories to working order.
Prime Cost of, Door lock-VR50101c=Rs.5640

Nos

7,470

160002

U746 Supplying and Fixing Door lock (Alpha) for Aluminium Door with
necessary accessories to working order.
Prime Cost of, Alpha lock=Rs.617

Nos

1,091

160324

U747 Supplying and Refixing Door lock Cylinder (Alpha) for Aluminium
Door with necessary accessories to working order.
Prime Cost of, Alpha lock cylinder=Rs.375

Nos

783

160325

Sliding lock for Aluminium door


U748 Supplying and Fixing Sliding lock for Aluminium door with necessary
accessories .
Prime Cost of, Sliding door Lock=Rs.694

Nos

1,082

160306

Stainless Steel Door Handle for Aluminium Doors


Supplying
and Fixing Stainless Steel Door Handle for Aluminium door
U749
with necessary accessories .
Prime Cost of, Stainless Steel Door handle=Rs.1500

Floor hinge
U750 Supplying and Fixing of UNION floor hinges (No: 8300) with
necessary accessories .(Imported, British or south African make),
Prime Cost of, UNION floor hing (No: 8300)=Rs.25676

U751 Supplying and fixing imported floor hinges (new star) of approved
quality including chipping of existing floors and making good after
completion.
Prime Cost of, Floor hinge=Rs.16500

Nos

2,106

160315

Nos

33,888

100245

Nos

22,407

160168

U752 Supplying and Fixing of VVP floor hinges with necessary


accessories .(Imported, British or south African make),
Prime Cost of, VVP floor hing=Rs.9500

Nos

13,344

160327

Hinges (Stainless Steel) for Aluminium Doors


U753 Supplying and fixing UNION Butt Hinges, , 4"x3"x 2mm (thick)
stainless steel, for Aluminium doors with pop rivets.
Prime Cost of, UNION Butt Hinges, , 4"x3"x 2mm (thick) stainless steel, for Aluminium
doors=Rs.2028

pairs

2,710

100161

Door Closer
U754 Supplying and fixing door closer (new star) with necessary accessories
Nos
Prime Cost of, Door closer (new star)=Rs.5094

This BSR is for Maintenance works only

160157

S07- 161

6,604

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

U755 Supplying and fixing door closer (Union or Yale) with necessary
accessories
Prime Cost of, Door closer (Union or yale) (Max 80 kg)=Rs.12810

U756 Supplying and fixing 8" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 8"=Rs.250

Item
Unit

BSR Rate
2016

Nos

16,403

160328

pairs

452

160318

U757 Supplying and fixing 10" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 10"=Rs.277

pairs

486

160319

U758 Supplying and fixing 12" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 12"=Rs.340

pairs

566

160320

U759 Supplying and fixing 14" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 14"=Rs.411

pairs

657

160321

U760 Supplying and fixing 16" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 16"=Rs.590

pairs

884

160322

U761 Supplying and fixing 18" bar hingers for casement windows with
necessary accessories
Prime Cost of, Bar hinger 18"=Rs.733

pairs

1,284

160323

U762 Supplying and fixing Casement Handel (04 hole) for windows with
necessary accessories
Prime Cost of, Casement window handle (4 hole)=Rs.215

U763 Supplying and fixing Crescent Lock for sliding windows with
necessary accessories
Prime Cost of, Crescent lock (sliding window)=Rs.143

U764 Supplying and fixing Magnetic Door Catcher (Plastic) with necessary
accessories
Prime Cost of, Door Catcher (plastic)=Rs.161

pairs

475

160316

pairs

384

160317

pairs

339

160326

Hot dip GI interlocking ceiling frame work only


U765 The frame members for suspended ceiling are in a standard kit (CKM
or equivalent). Main runners ( 38mmx24mmx3660mm) are fixed at
1220 centers securely suspended using 4mm dia. GI hanging rod to
the structural soffit or timber roof, using an appropriate suspension at
1220mm centers, Cross Tees (27mmx24mmx1220mm) of 1220mm
length to be fixed between the main runners at 610mm centers and
another cross tees (27mmx24mmx610mm) fixed at mid span between
610mm to form a grid structure of 610mmx 610mm in size. wall
angles (24mmx24mmx3050mm) are fixed at wall edges. ( Edge
molding and painting paid separately)
sq.ft

This BSR is for Maintenance works only

S07- 162

284

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

U766

U767

U768

U769

U770

Description

Mineral fiber suspended ceiling


Supplying & fixing of 2' 0"x2' 0"& 15mm thick (Mineral fiber) ceiling
boards lay on hot dip GI pre engineered interlocking ceiling frame
work. The frame members for suspended ceiling are in a standard kit
(CKM or equivalent). Main runners ( 38mmx24mmx3660mm) are
fixed at 1220 centers securely suspended using 4mm dia adjustable GI
hanging rod with spring clips to the structural soffit or existing roof
structure, using an appropriate suspension at 1220mm intervals along
each Main runners. Cross Tees (27mmx24mmx1220mm) of 1220mm
length to be fixed between the main runners at 610mm centers and
another cross tees (27mmx24mmx610mm) fixed at mid span between
610mm to form a grid structure of 610mmx 610mm in size. wall
angles (24mmx24mmx3050mm) are fixed at wall edges.
Mineral fiber Suspended ceiling
Supplying & fixing 4' -0"x 2' -0"x 1/2"thick Mineral fiber ceiling
boards lay on Existing interlock type ceiling frame work , forming a
panel side of 2' 0" X 2' 0", and at the average elevation of 12' 0"
from the working floor, (for 12 nos or 96 ft2)
Supplying and installing mineral fiber Japanese make suspended
exposed ceiling system, using 4' 0" x 2' 0"' X 15 mm thick ceiling
boards, lay on white colour interlock type, hot dip GI grid system ,
forming a panel side of 4' 0" x 2' 0"',and suspended on 4mm dia.
adjustable rods with spring clip to soffit of concrete or timber roofs. (
Edge molding paid separately)
Supplying and installing mineral fiber Japanese make suspended
exposed ceiling (Reveal edge) system, using 605 mm X 605 mm X 15
mm white colour ceiling boards lay on white colour interlock type hot
dip GI grid system , forming a panel side of 610mmx610mm,and
suspended on 4mm rods with spring clip to soffit of concrete or
timber roofs. . ( Edge molding & Painting paid separately)
Super Flex Suspended ceiling
Supplying and installing Super Flex (Plain) suspended ceiling system,
using 4 ft X 4 ft X 3.2 mm ceiling boards lay on white colour interlock
type hot dip GI grid system , forming a panel side of 2ft X2 ft , and
suspended on 4mm rods with spring clip to soffit of concrete or
timber roofs. ( Edge molding & Painting paid separately)

U771 Supplying and installing Super Flex (with design) suspended ceiling
system, using 4 ft X 4 ft X 3.2 mm ceiling boards in white colour
interlock type hot dip GI grid system , forming a panel side of 2ft X2
ft, and suspended on 4mm rods with spring clip to soffit of concrete
or timber roofs ( Edge molding & Painting paid separately)

This BSR is for Maintenance works only

S07- 163

Item
Unit

BSR Rate
2016

sq.ft

272

sq.ft

145

sq.ft

418

sq.ft

443

sq.ft

194

sq.ft

202

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Gypsum board suspended ceiling


U772 Supplying and fixing gypsum board suspended ceiling . using 2 ft x 2ft
X 9 mm. thick ceiling boards in white colour interlock type hot dip GI
grid system , forming a panel side of 610mmx610mm, and suspended
on 4mm GI hanging rods with spring clip to soffit of concrete or
timber roofs ( Edge molding & Painting paid separately)
Metal ceiling
U773 Supply and installation of concealed type metal false ceiling, at an
average elevation of 12' from the working floor Including revel edge
of 2' 0" X 2' 0" size 0.5mm minimum thickness, epoxy powder painted
steel Tiles (paint film thickness of average 80microns ) suspended to
the roof frame work with, 0.3 mm thick pre painted hot dip
galvanized, 15mm x 38mm plain TEE-grid bars and 20mm x 24mm
wall angles, suspended with adjustable burrerfly clip, 4mm dia. surface
treated galvanized steel hanger rods, complete with necessary anchor
bolts and any other accessories. (All in accordance with the approved
shop drawings, to the Engineers' satisfaction. )
Prime Cost of, Concealed type metal false ceiling, 600mm x 600mm size 0.5mm minimum
thickness, epoxy powder painted steel Tiles.=Rs.790

U774 Supply and installation of lay in type "E-Metallic Aluminium ceiling,


at an average elevation of 12' from the working floor, Including revel
edge of 2' 0" X 2' 0"mm size 0.7mm average thickness, 80 microns
high quality powder coated Aluminium perforated or plain ceiling
panels, suspended to the roof frame work with hot dip galvanized "T"
bars of 14mm x 38mm and wall angles of 19mm x 24mm suspended
with, adjustable burrerfly clip, 04mm GI hanging roads, anchor bolts
and all other accessories. (All in accordance with the approved shop
drawings, to the Engineers' satisfaction. )
Prime Cost of, E-Metalic Aluminum ceiling, 0.7mm tk. 600mm x 600mm size, high quality
powder coated Aluminum perforated or plain ceiling Tiles.=Rs.1350

Partitioning (Gypsum board)


U775 Supplying and fixing gypsum board partitioning with GI channel
member frame work fixed onto walls and floors , 1/2" thick gypsum
board fixed to both sides of frame work complete with making joints
using joint tape and gypsum compound to get wall finish. Rate to
include for applying one coat of acrylic wall filler to boards.
Removing and fixing an Aluminium door
U776 Removing existing Aluminium door with frame and fixing at new
position.
Aluminium, Ceiling panels (Pinholes)
U777 Supplying, fixing Aluminium 2'-0" x2'-0" ceiling panels (Pinholes)
with Aluminium frame work and adjustable.
Prime Cost of, Aluminium Pinholes Ceiling tile 2' x 2'=Rs.665

Aluminium, partitions with available extrusions


U778 Fixing available Aluminium partition with using new GI channels and
new rubber beadings, prop rivets, screws, nails, etc..
This BSR is for Maintenance works only

S07- 164

Item
Unit

BSR Rate
2016

sq.ft

388

sq.ft

585

70045

sq.ft

781

70046

sq.ft

614

sq.ft

228

sq.ft

474

160280

sq.ft

138

BSR 2016- Department of Buildings

Colombo, Gampaha Kaluthara Districts

This Building Schedule Rate(BSR) is the property of Department of Buildings (DOB). Reproducing, using of commercial purpose is prohibited. This
BSR is produced for the purpose of estimation only. Using this BSR for directly awarding works are prohibited. DOB is not responsible for using the
BSR without the consultation of the DOB

Item
Code

Description

Item
Unit

BSR Rate
2016

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

441
465
473
511
661

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

510
550
566
607
789

sq.ft
sq.ft
sq.ft
sq.ft
sq.ft

606
656
661
728
958

Aluminium Fixed Glass Windows


Supplying, Fabricating & Installing of 1.2mm thick 41mm deep
Aluminium Fixed Glass window frame only. Rate to include for rawl
plugs, fasteners etc. Glass Panels, Louver Panels, paid separately.
(Alumex extrusion Nos. CA-1007 or equivalent) - Refer U001 to U016 for glass &
boards, U017 to U051 for louvers-

U779
U780
U781
U782
U783

41mm Aluminium Fixed Glass Window Frame Only


-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Supplying, Fabricating & Installing of 1.2mm thick 60mm deep
Aluminium Fixed Glass window frame only. Rate to include for rawl
plugs, fasteners etc. Glass Panels, Louver Panels, paid separately.
(Alumex extrusion Nos. CA-1009 or equivalent)- Refer U001 to U016 for glass &
boards, U017 to U051 for louvers-

U784
U785
U786
U787
U788

60mm Aluminium Fixed Glass Window Frame Only


-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium
Supplying, Fabricating & Installing of 1.2mm thick 70mm deep
Aluminium Fixed Glass window frame only. Rate to include for rawl
plugs, fasteners etc. Glass Panels, Louver Panels, paid separately.
(Alumex extrusion Nos. CA-1011 or equivalent)- Refer U001 to U016 for glass &
boards, U017 to U051 for louvers-

U789
U790
U791
U792
U793

70mm Aluminium Fixed Glass Window Frame Only


-DO- Matt Finished Aluminium
-DO- Natural Anodized Aluminium
-DO- Bronzed Anodized Aluminium
-DO-Powder Coated Aluminium
-DO-Wood Finished Aluminium

--END--

This BSR is for Maintenance works only

S07- 165

You might also like