Professional Documents
Culture Documents
Modified existing steel piping and electrical conduit designs to allow for
new automated pipe bender using 3D CAD programs Solid Edge/NX.
Developed new piping products that reduce assembly time of fuel piping by
an estimated 50%, eliminating regular maintenance and minimizing failure.
2
Piping Design Engineer
Main resource for pipe support design and analysis using FEA and
Mathcad software.
Designed plant piping based on pipe stress analysis using Caesar II pipe
stress software.
3
Piping Design Engineer
Designed new chemical process piping systems for clients in various
industries
Performed Stress Analysis on a variety of piping systems, including glasslined and Teflonlined pipe
Worked closely with clients to ensure new piping systems met all process
requirements
4
Piping Design Engineer
Performed pipe wall thickness calculations according to ASME Codes,
B31.1 and B31.3.
Designed pipe support on the vessel to support over size pipe such as
pipe larger than 24".
Specified valve selection, branch charts, flanges, gaskets and bolting for
piping design.
5
Construction Services / Piping Design
Engineer
Utilizing AutoCAD 2D and CADworks 3D to develop pipe spool
drawings for shop and field fabrication of utility and process cooling
water systems for new and modified steel plants. Acquire material
take-off from schematic diagrams and designs. Redesign plant layout
in the field at customer's request.
On site CAD station setup for immediate design modification of plant layout
due to interference's encountered during installation.
Designed pipe layouts for projects in the oil & gas industry by using
International Codes & Standards (ASME B-31.3).
7
Piping Design Engineer
Headed three (3) piping and equipment layout senior designers for detailed
design of slug catcher and cooling water piping systems.
Supervised three (3) field piping engineers for piping pre-fabrication and
installation.
9
Piping Design Engineer
1
Industrial Piping Design Engineer
3D modeling of piping and equipment according to the field laser scan for
SALMAN offshore oil platform (PP3). To complete the process it is necessary to
joining LFM and AVEVA PDMS software