Professional Documents
Culture Documents
ENGLISH...............................................................5
en
SUMMARY
1 WIRELESS CONFIGURATION OF LINKSYS WAP610N-EU
ACCESS POINT................................................................................5
2 CLIENT WIRELESS CONFIGURATION TO ACCESS THE WIFI
NETWORK........................................................................................6
3 ACCESS TO THE CONFIGURATION PAGE OF LINKSYS
WAP610N-EU ACCESS POINT........................................................6
4 DETECTION OF ADDRESS TCP/IP ACCESS POINT LINKSYS
WAP610N-EU...................................................................................7
en
OF
LINKSYS
Here below we reported the parameters that are necessary for the Wireless
configuration of the LINKSYS WAP610N-EU.
LINKSYS Access Point has already been configured to operate
with AXONE PALMTOP and PAD terminals, it is NOT necessary to
perform any kind of configuration.
The configuration data (password, encryption, etc.) reported
here below are strictly confidential and MAY NOT be disclosed.
ACCESS POINT CONFIGURATION:
*NOTE
Since the Access Point has to be connected to a pre-existing network, it is
presumed that a second device with DHCP Server enabled is already
present (es.: router ADSL, server class OC, etc.).
To avoid conflicts in the assignment of IP addresses, LINKSYS WAP610NEU Access Point DHCP Server is disabled by default.
If no other DHCP server is available in the network, enable the same
function in the Access Point.
en
Network
IP
192.168.1.*
address:
Every device connected to the network has an ID, called MAC address,
that identifies it correctly inside the same network.
Every LINKSYS WAP610N-EU Access Point indicates its MAC address
on the print on its bottom:
MAC address =
00-25-9C-90-10-60