Professional Documents
Culture Documents
Assembly of X axis
G003796
1
Inserting the bearings
A
4x
1x
1x
2
Preparing the X axis tensioner
A
1x
1x
Pulley
M3 x 20 mm screw
1x
1x
Assembly:
Insert the screw (D) in the tensioners hole
until it is positioned as shown in figure 2. Affix
the pulley with the screw (C), as shown in
figure 4.
3
Inserting the X axis tensioner
A
1x
1x
3x
Assembly:
M6 nut
4
Sliding the bearings onto the smooth rods
A
2x
3x
5
Preparing the endstop sensor
A
1x
1x
2x
Endstop
Endstop mounted on a PCB with a LED indicator.
M3 nut
M3 x 10 mm screw
2x
6
Placing the endstop sensor on the smooth rod
A
1x
1x
Assembly:
7
Inserting the smooth rods into the lateral parts
A
1x
1x
1x
Assembly:
8
Assembling the motor
A
1x
2x
2x
1x
Nema 17 motor
M3 x 16 mm screw
M3 x 10 mm screw
1x
Assembly:
9
Inserting the adjusting screw for the endstop
sensor
A
1x
1x
Assembly:
M3 x 25 mm screw
10
Inserting the pulley into the motor
A
1x
Nema 17 motor
Nema 17 bipolar stepper motor (2.5A 1.8
deg/step).
1x
Assembly:
Fix the pulley to the motor with the help of a 2
mm Allen wrench. Tighten the set screw against
the chamfered part of the motors axis.