Professional Documents
Culture Documents
WGF107
GENERAL DESCRIPTION
Wagner WGF107 is a rigid moulded friction material; it
is charcoal grey in colour, and it has a basis of steel
filaments in a random dispersion. Selected friction
modifiers are combined with a specially developed
binder system to determine both the strength and the
frictional performance characteristics of the material.
Although not physically affected by slight
contamination, Wagner WGF107 is not suitable for use
under conditions of immersion in oil. Wagner WGF107
has a medium coefficient of friction, and maintains its
performance at all duty levels; it possesses good
thermal stability and static frictional behaviour.
This material has been developed for service on disc
brakes for cars and vans for replacement market use;
it is particularly suitable for use on rear axle
applications in the European market, including those
with integrated parking brakes, where it passes all
relevant ECE R90 approval tests.
AVAILABILITY
Manufactured in the form of pads for disc brakes,
integrally moulded to steel backplates.
APPLICATION
Disc brakes for light vehicles of all energy ratings.
TECHNICAL DATA
Friction
for design purposes
0.32
Typical Physical Properties
Specific gravity
2.67 g/cm3
Deflection in compression 0.65% (20C)
(to ISO 6310)
Deflection in compression 1.13% (400C)
(to ISO 6310)
Ultimate shear strength
3.3MPa
Rockwell Hardness (HRR) 72
Recommended operating range
Pressure
0.35-5.20 MPa
Rubbing speed
30m/s max
Continuous usage
225C max
Intermittent usage
350C max
Temperature limit
600C