Professional Documents
Culture Documents
Statement of VoIati[ity
Xer.x \VorkCentre E735/5740/571i5/
5755/5765/5775/5790
Statement of Volatility
Xcrox :kCentr. 5 35/57L.iO/57Li5/5755/5765/5775/579O
Notice
.oscnhes the locations, capacities and contents of volatile and non-volatile memory devices within the WorkCentre
s7tn:o, 3 3755/5765/5775/5790.
The contex: of the information in this document is that normal means of access or
reproduce, read, or extract stored or latent data. This does not include attempts to r nc...
storage methods by individuals or organizations with advanced skills or through the u:
specialty equipment not normally available in the industry or to the public.
.:
The content of tnc doconnt is provided for information purposes only. Performonc
chect to hce onnccb Xmx Corporation terms and conditions of sole and/or leasE N
cC croi ogreement or binding obligations between Xerox CorF n:
o.
:ein is exclusively
nnstitutes the
Signature
Printed Name
Cheuk Kan
Job Title
Preparation Date
th
21
March 201 0
.
1
\J\yvt
Printed Name
Larry Kovncit
Job Title
Preparation Date
March 2010
Steve Lyon
Program Manager
th
211
March 2010
Statement of Volatility
7
7
5/5775/5790
/5
515
51576
iO
i5/575
573
.Xerox WorkCentre 1
Introduction
The Xerox, WorkCentre 5735I57ti0/57L5/ 57551576515775/5790 is used to perform the following tasks:
Copying
Printing
Sconning (Network ond Local)
Foxing
This document describes the omounts ond types of memory contoined in the device in on eosy to read tabular format. To allow
security issues to be addressed as needed, specific commentary hos been included about job data and where Personally
Identifiable Information (P11) con be found in the system.
For larger Xerox systems that may contain multiple media feeders or multiple finishers, tabulated data is shown even though
these devices never contain any job or P11 data in electronic form. Also, in larger Xerox systems, another vendor may supply a
Digital Front End (DFE) that is connected to the Xerox Print Engine. In these cases, the vendor of the DFE must provide their awn
Statement of Volatility far the hardware which comprises their additions to Xerox products.
The information contained in this document has been verified at the time the product is released for sole. Manufacturing process
changes may require that memory amounts ore increased but, the purpose or contents of the memory will not change.
Non-Volatile Memory
All non-volatile memory listed is required for normal system operation and during service and diagnostic procedures.
Removal of any non-volatile memory will void the warranty.
All non-volatile memory cannot be accessed by occidental keystrokes (with exception of BIOS access keys).
Statement of Volatility
775/5790
7L
/57L
/5755/5765/5
5735/5
0
5
Xerox WorkCentre 1
System Descriptions
Volatile Memory
Size
J User Modifiable
Function or Use
Process to Sanitize
DRAM
2KB
(YIN)
N
SRAM
6KB
DDR2 SDRAM
UpgradeabLe to
1GB
2GB
SDRAM
80MB
Additional Information: There are also a numbers of RAM buffers in the video path that are used for image
manipulation (Reduce/Enlarge, etc.), and all have no data retention capability. When power is removed all data is lost. These
buffers are typically built into the ASICs. Typical bleed down time for all volatile memory is 10 seconds.
Function or Use
Process to Sanitize
32KB
User Modifiable
(YIN)
N
Flash ROM
128KB
Flash ROM
128MB
NVRAM
128KB
FlashROM
4MB
Size
Additional Information: There ore other non volatile memory devices in the system, but these are used solely for low
level I/O control Some examples of this distributed control are:
Power distribution, Photoreceptor ond main drive motors control
Paper Registration
Finisher
Removable
Y/N
Size:
User ModifiabLe:
YIN
Function:
Process to Sanitize:
80GB
Network Controller
Application and
Copy Controller
Application software.
Image storage,
processing and
Overflow EPC image
storage.
On Demand Image
Overwrite
CF
512MB
:
I
Additional Information:
USB
Complete an entry for each USB port
USB port and location
Purpose
-____
--------
USB A port
Software upgrade
USB B port
Walk up printing; Xerox diagnostic tools (PWS and CAT) and Xerox copier assistant
Purpose