Professional Documents
Culture Documents
sand formation. From local experience it is known that sonic log travel times in this
formation read too high because the formation is loosely consolidated. A correction
factor, Cp= 1.32, should be applied to the Wyllie time-average equation to correct
for lack of compaction.The matrix and formation fluid travel times are, tma = 46
s/ft and tf = 210 s/ft.
(2 marks)
What is the formation porosity, %, predicted using the Wyllie equation with a
compaction correction?
17
26
29
34
Q-2 From lab measurements on core samples from a zone of interest you are given
the following Archie parameters:
(2marks)
Cementation Factor = 0.4, n = 2, Cementation Exponent = 2.5
From resistivity measurements on produced formation water samples, R W = 0.05
ohm-m at reservoir temperature.From log measurements, Rt = 10.0 ohm-m and =
0.27. What is Sw%? (2marks)
Q-3
A primary objective of logging the micro Laterolog (MLL) is to determine
(1Marks):
Q-4 Invasion and resistivity profiles in a water bearing zones having fresh water
mud
(1Marks)
Rxo=Ri=Rt
Rxo> Ri> Rt
Rxo> Ri< Rt
Rxo<Ri<Rt
Q-5 Which of the following log best describes the diameter of the wellbore.
Caliper log
Micro latero log
MSFL
Density log