Professional Documents
Culture Documents
USER
S MANUAL
System disarmed
Profile
For a better understanding of this product, please read this user
manual throughly before using it.
CONTENTS
Features
Alarm Host Introduction
Initialization
System Settings
Enter Settings
Add Remote Controller
Delete Remote Controller
Coding of Defense Zone
Delete Defense Zone
Defense Zone Place Setting
Defense Zone Mode Setting
Siren Setting for Alarm
Alarm Delay Setting
Alarm Number Setting
Delete Alarm Number
SMS Number Setting
Delete SMS Number
Network Center Setting
Voice Recording
Record Play
System Date Setting
System Time Setting
Timely Arm Setting
Timely Disarm Setting
Wireless Control Setting
Wireless Siren Coding
1
2
4
4
4
5
5
6
7
7
8
9
9
10
10
11
11
12
12
12
13
14
14
15
15
16
16
17
17
18
18
19
20
20
21
22
22
23
24
24
25
25
26
26
27
27
28
28
29
29
30
31
Features
Chapter 1. Features
Elegant and advanced touch keypad for easy operation;
128x64 lattice LCD screen with clock display;
4 wired and 10 wireless defense zones; each wireless zone supports
maximum 10 sensors;
Support maximum 8 remote controllers;
Built-in high-volume speaker, and artificial intelligent digital voice
announcer;
Built-in artificial intelligent English message;
10-second automatic voice message recording;
Can preset 6 phone numbers: when alarming, system will make audio
call to these numbers automatically;
Can preset 3 SMS numbers: when alarming, system will send SMS;
Timely arm and disarm;
Can be used as a wireless telephone by using keypad to make calls;
One-key-control: out arm, home arm, arm by remote controller or
phone call;
SOS, fire, gas, door, hall, window, balcony, and boundary places
alarm;
Real-time, delay, 24 hours, bypass defense zones programming
function;
Wireless learning code: easy to add additional wireless accessories;
Remote control the device to arm, disarm, monitor, and intercom by
phone;
Record checking: the device can store 30 alarm records;
Different arm status: out arm, home arm, delay arm and timely arm;
Arm by different ways: panel keypad, remote controller, remote call;
Alarm call has the priority: even when the number of the device is busy;
Built-in LI battery: automatically recharge.
3
1
System disarmed
RED
SIREN+
SIREN-
T_VCC
CLK
DATA
T_GND
GND
Zone 1
GND
10
Zone 2
11
GND
12
Zone 3
13
GND
14
Zone 4
15
GND
GND
WIRED SENSOR
Zone 4
GND
15
GND
Zone 3
14
Zone4
GND
13
12
GND
Zonel
Zone3
GND
11
T-GND
GND
Zone 2
DATA
10
CLK
Zone2
3
T-Vcc
GND
2
SIREN-
GND
1
SIREN+
Zone l
GND
T-GND
DATA
CLK
POWER IN
ON
BLACK
SIREN
4. Wired ports
T-Vcc
SIREN-
SIREN+
OFF
GND
Wired sensor 2: support both NO and NC
GND
Wired sensor 3: support both NO and NC
GND
Wired sensor 4: support both NO and NC
GND
Initialization
Chapter 3. Initialization
Correct initiation of the main panel is important to its normal working
and lifespan.
1. Connect the wired accessories that you need.
2. Insert SIM card.
3. Connect the power adaptor. The main panel will start self-inspection
and the POWER indicator LED will flash once. If this LED does not
light on, you need to restart the panel. Please do it at least 10
seconds later as repeated power on and off in short time is bad to
the panel's service life.
4. There will be a short beep after searching GSM network successfully.
The signal icon will display on the screen and the power status LED
will flash every 3 seconds.
5. Turn on the battery switch.
6. Check the GSM signal icon on the LCD screen. Signal less than 3
lattice will affect the normal performance. Please put the main panel
at the place with good GSM signal.
Remote control
System disarmed
System disarmed
Enter:
11/12/12
11:49
888888
Exit
Enter
System Settings
Remote control
Remote control 1
Enter
Exit
Remote control 1
Back
000000000
Delete
Trigger code
Enter
Exit
Remote control 1
077015192
Error
Repeat code
Back
Remote control 1
Coding
Normal code
Save
Back
Save
Remote control 1
Save completed
Save
System Settings
Remote control 1
Remote control
Remote control 1
Coding
Delete completed
Delete
Enter
Exit
Enter
Exit
Zone 1
Zone 1
Zone
Exit
Enter
Exit
Coding
000000000
Delete
Trigger sensor
Enter
Back
Save
System Settings
Zone 1
Zone 1
241015162
Error
Normal code
Repeat code
Save
Back
Zone 1
Save completed
Save
Back
Zone 1
Zone
Zone 1
Coding
Delete completed
Delete
Exit
Enter
Exit
Enter
System Settings
Operation figures:
Fig 1: enter defense zone setting
Zone 1
Zone 1
Place: Fire
Place: GAS
Armed: Enable
Armed: Enable
Zone
Enter
Exit
Enter
Back
Enter
Back
The format of alarm SMS: [01~10] zone [place] alarm. For example,
you set the place of zone 4 as window. The alarm SMS you receive
is: 04 zone window alarm.
7. Defense Zone Mode Setting
There are different defense zone modes: out arm, home arm, alarm
under disarm mode. For example, you need gas detectors working all
the time, please set ARM, HOME, and DISARM as enabled.
Method: enter defense zone setting menu, press 2 or 8 to choose
HOME arm status (enable or disable), press ENTER to confirm.
Setting methods for OUT arm and DISARM are the same.
Operation figures:
Fig 1: enter defense zone setting
Zone 1
Zone 1
HOME: Disable
HOME: Enable
Disarmed: Disable
Disarmed: Disable
Zone
Exit
Enter
Back
Enter
Back
Enter
System Settings
Zone 1
Zone 1
Siren: Disable
Siren: Enable
Delay: Disable
Delay: Disable
Zone
Enter
Exit
Enter
Back
Enter
Back
Zone 1
Zone 1
Siren: Disable
Siren: Enable
Delay: Disable
Delay: Disable
Zone
Exit
Enter
Back
Enter
Back
9
1
Enter
System Settings
Phone 1
Phone 1
Phone number
No number
123456789
Delete
Enter
Exit
Back
Save
Back
Phone 1
Phone 1
123456789#
Save completed
Delete
Enter
Back
Phone 1
Phone number
Phone 1
123456789#
123456789#
Delete
Exit
10
Enter
Back
Delete
Enter
Back
Enter
System Settings
Fig 4: the 1st number is deleted
Phone 1
Delete completed
SMS 1
SMS number
SMS 1
No number
13812345678
Delete
Enter
Exit
Back
Back
Save
SMS 1
Save completed
11
System Settings
Operation figures:
Fig 1: enter SMS number setting
SMS 1
SMS number
SMS 1
123456789#
13812345678#
Delete
Delete
Enter
Exit
Enter
Back
Enter
Back
SMS 1
Delete completed
Recording
Recording
Start recording
05
Recording
Exit
Enter
12
Back
Enter
Back
Enter
System Settings
Enter record setting, and then press 6 to choose play. The panel will
start playing the voice message you recorded. You can re-record if
you're not satisfied with it.
Operation figures:
Fig 1: enter record setting
Recording
Start recording
Play
Recording
Enter
Exit
Recording
Enter
Back
Enter
Back
Recording
05
Enter
Back
Date
Date
Time
11/12/12
00/00/00
Please enter
Enter
Exit
Date
Save completed
13
Back
Enter
Back
Save
System Settings
Time
Enter
Exit
Fig 4: input the time
Date
Time
11/12/12
16:25
Enter
Back
Enter
Back
Time
Time
00:00
Save completed
Please enter
Save
Back
Time
Exit
14
Enter
Back
Date
Timely arm
11/12/12
Disable
Enter
Back
Enter
System Settings
Timely arm
Save completed
Time
Exit
Enter
Back
Date
Timely disarm
11/12/12
Disable
Enter
Back
Enter
Timely disarm
Save completed
15
System Settings
Wireless Control
Control
Wireless siren
Enable
Transmission
Encryption
Exit
Enter
Back
Enter
Back
Enter
Fig 4:
After pressing ENTER key, the main unit will transmit a wireless signal to control the wireless siren.
16
System Settings
Operation figures:
Fig 1: enter wireless control
menu
Wireless siren
Control
Wireless Control
Disable
Enable
Encryption
Enter
Exit
Enter
Back
Wireless siren
Wireless siren
8907
Enter
Back
Save completed
Please input
Enter
Back
Operate password
Settings
Operate password
1234
4545
Please input
Exit
17
Enter
Back
Enter
Back
Save
System Settings
Fig 4: save it
Operate password
Save completed
Settings
Exit
Enter
Operate password
Program password
1234
888888
Back
Enter
Back
Enter
Program password
Save completed
18
System Settings
Settings
Enter
Exit
Operate password
Delay arm
1234
40
Enter
Back
Enter
Back
Delay arm
08
Please enter
Save
Back
Settings
Exit
19
Enter
Operate password
Delay alarm
1234
60
Back
Enter
Back
Enter
System Settings
Delay alarm
15
Please input
Save
Back
Settings
Enter
Exit
Operate password
Voice prompt
1234
Enable
Back
Enter
Back
Enter
Voice prompt
Disable
Back
Enter
20
System Settings
Settings
Enter
Exit
Operate password
Siren prompt
1234
Disable
Enter
Back
Enter
Back
Siren prompt
Enable
Enable
Enter
Back
Settings
Exit
21
Enter
Operate password
Backlight on
1234
Disable
Back
Enter
Back
Enter
System Settings
Backlight on
Enable
Enable
Enter
Back
Settings
Enter
Exit
Operate password
Remote siren
1234
Disable
Back
Enter
Back
Enter
Remote siren
Enable
Enable
Back
Enter
22
System Settings
numbers, so that users could know the status of the system in time.
SMS content:
Out arm: System armed; disarm: System disarmed.
Method: enter settings menu, and then you'll see operate password.
Press 6 to choose arm disarm SMS and choose enable or
disable.
Operation figures:
Fig 1: enter settings menu
Settings
Enter
Exit
Operate password
1234
Disable
Enter
Back
Enter
Back
Enable
Enter
Back
Language
Operate password
Settings
English
1234
Exit
23
Enter
Back
Enter
Back
Enter
System Settings
Settings
Exit
Enter
Operate password
Factory setting
1234
Restore
Back
Enter
Back
Enter
Plesse wait
Back to default
setting
24
Operation Instructions
System disarmed
System disarmed
Enter:
11/12/12
11:49
Plesse wait
Back to default
password
95175308246
] on the remote
Main panel operation: press [ARM]. The system will enter arm status
after the delay time (default: 60seconds)
System armed
11/12/12
25
11:49
Operation Instructions
2. Home Arm
Home arm means part of the defense zones are in arm status. When
there's someone at home, it is recommended, for safety purpose, to
enable some of the detectors (such as sensors for door, window,
balcony, etc), and disable the others (such as sensors for the hall or
some places easy to be triggered by person at home).
Use main panel keypad to press [STAY]. The screen will display
system armed.
Remote controller operation: press home arm button [
remote controller.
] on the
Home arm
11/12/12
11:49
3. Disarm
The purpose of disarming the system is to let it not in alert status. One
way is normal disarming after operation of arming, and the other is to
stop the main unit alarming. After the operation of disarm, all the
defense zones except 24-hour zone shall not work.
Use main panel keypad to input operation password + ENTER. The
screen will display system disarmed.
Remote controller operation: press disarm button [
controller.
Main panel operation: password+ENTER
26
] on the remote
Operation Instructions
System Disarmed
11/12/12
11:49
27
Operation Instructions
Press [1]: arm, if finished successfully, you will hear a voice prompt
System armed.
Press [2]: disarm, if finished successfully, you will hear a voice prompt
System disarmed.
Press [3]: monitoring for 30 seconds, to continue monitoring, press [3]
again to monitor for another 30 seconds.
Press [4]: two-way intercom for 30 seconds. You can't operate the main
unit during this time.
6. Emergency Help
Sometimes, there may be some accidents happening (such as sudden
illness of old people or children, fire accident, burglar intrusion). Press
[SOS] button on keypad, or [
] button on remote controller or
wireless panic button, the main unit will alarm and make call to the
preset user numbers.
Remote controller operation: press [
controller.
Main panel operation: press [SOS].
The SMS content for emergency help is: 00 zone SOS alarm.
28
Technical Parameters
System disarmed
Enter:
00
Alarm record: 01
Alarm record: 02
11/12/12
21:12
11/12/12
23:13
01 Zone
SOS
08 Zone
GAS
Exit
Exit
29
Input Voltage
DC12V/1A
Standby Current
<35mA
Alarming Current
<450mA
Wireless Frequency
315/433/868MHz, PT2262/EV1527
GSM Frequency
Back-up Battery
Siren Volume
100~110dB
Components List
List 2
Home
Defense Zone
Out Arm
Alarm
Type
Arm
Siren
Information
Zone 1
effective
invalid
real-time
Door alarm
yes
Zone 2
effective
invalid
real-time
Hall alarm
yes
Zone 3
effective
effective
real-time
Window alarm
yes
Zone 4
effective
effective
real-time
Balcony alarm
yes
Zone 5
effective
effective
24 hours
Fire alarm
yes
Zone 6
effective
effective
24 hours
Gas alarm
yes
Emergency button
effective
effective
24 hours
SOS alarm
no
Zone 7-10
effective
invalid
real-time
SOS alarm
yes
effective
invalid
real-time
SOS alarm
yes
Program Password
888888
Remote control
On
Operation
1234
Siren
Off
180 sec.
Home Appliance
Optional
Password
30
1 pc,
2 pcs,
1 pc,
1 pc,
1 pc,
1 pc,
1 pc.
31
32
Components List
33
2012.08.V2.0
MOBILE CALL
GSM Alarm System