Professional Documents
Culture Documents
Figure 1
2.
(a) Determine the value of Rf necessary for the circuit in figure 2 to operate
as an oscillator.
(b) Determine the frequency of oscillation.
{Given C1=C2=C3=0.001F, R1=R2=R3=10k}
Rf
0V
C1
C2
C3
Vout
R1
R2
R3
Figure 2
3.
Figure 3
4.
For the phase shift oscillator show that the feedback ratio determined by the
cascaded section is given by
R3
3
R 5RX C 2 j X C 3 6R2 X C
5.
Figure 4
6.
A PLL is locked onto an incoming signal with peak amplitude of 250mV and
a frequency of 10MHz at a phase angle of 30o. The 400mV peak VCO signal
is at a phase angle of 15o.
(a)
(b)
What is the value of the control Voltage being fed back to the
VCO at this point?