Professional Documents
Culture Documents
April 2014
ii
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V7.0
Contents
Uempty
Contents
Overview
Organization and summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Requirements
Lab configuration overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Network requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setup
Network setup instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
System setup instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TSM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preparing the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Software setup instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing Tivoli Storage Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Remote labs
Remote lab access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Remote lab setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Appendix
Instructor and student system checklists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Passwords and IDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
iii
Part 1. Overview
Important: The classroom must be ready to run lab exercises before the first day of class. You
might want to create a virtualized environment that you can maintain and reuse. Test the entire
setup thoroughly to avoid problems during class time. If you experience problems and need
assistance, contact the IBM Help Desk:
Toll-Free: 1-888-502-5511
International: 1-404-238-6000
Email: Insthelp@us.ibm.com
Classroom setup
Server1 is
on TSM1
There is one system for this setup, this can be physical or virtual. A pre-configured
virtual machine image is available for this course.
Table 1. Lab environment summary: 2 system labels on isolated network, internet access optional
Machine type
Instructor and
System label or student? processor RAM
TSM1
Instructor 3.2 GHz
1 GB
and student
Hard disk
size
100 GB
Display
1024 x 768
Operating
system
Windows
2008 R2
Server
Software
Mozilla Firefox
Adobe Acrobat
Reader
64-bit
PowerPoint viewer
IBM Tivoli Storage
Manager 7.1
IBM Tivoli Storage Manager 7.1 Advanced Administration, Tuning, and Troubleshooting
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V7.0
Organization and summary
Uempty
User name
labadmin
db2user1
admin1
Password
Object00
Object00
admin1
TSM Client ID
client
client
admin1
admin1
Comment
case sensitive
log on using this ID
This is the primary TSM administrative
ID.Additional administrative IDs are
created as part of the lab. Students are
prompted when they should be used and
ID and PWD are noted in lab instructions.
This is the primary TSM client
ID.Additional client IDs are created using
scripts. Students are prompted when they
should be used and ID and PWD are
noted in lab instructions.
Primary Operations Center ID
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Part 2. Requirements
Example: For instance, if the instructor requires two systems and each of 12 students requires
one system each, you make the following calculation:
2 instructor systems + (12 students x 1 system each) = 14 systems for the class
RAM
7 GB*
Hard disk
100 GB
Display
resolution
1024 x 768
Operating system
Windows 2008 R2
Server 64-bit
Note:
RAM
7 GB*
Display
Hard disk resolution Operating system
100 GB
1024 x 768 Windows 2008 R2
Server 64-bit
Note: The student and instructor machines are set up with all the same software, except that the
instructor machine also needs Power Point viewer. The instructors may also choose to load
additional materials on their own system as they deem necessary.
Network requirements
Configure and test the specific network requirements for this class as shown in Table 5. The words must not
provide indicate that this feature will interfere with student exercises and must not be present in the
classroom. The words not necessary indicate that the course does not require the feature, but it will not
interfere with exercises if it is present in the classroom.
If isolated networks are required, each set of student and instructor systems must be on its own private
network that is not visible to any other set of student systems in the classroom. If a single network is required,
all classroom systems must be connected to the same network.
Classroom requirement
isolated networks
optional
required
IBM Tivoli Storage Manager 7.1 Advanced Administration, Tuning, and Troubleshooting
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V7.0
Lab configuration overview
Software requirements
Uempty
Software requirements
Obtain the following software before starting classroom setup. The classroom provider is responsible for
obtaining software licenses for any non-IBM software.
Version
SP1 or later
64 bit
7.1.0
9.0 or later
3.6.2
Operating systems
Microsoft Windows
Server 2008 R2 64-bit
Microsoft Windows
Server 2008 64-bit
Windows
Windows
TSM1
TSM1
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Part 3. Setup
10
11
V7.0
System setup instructions
TSM1
Uempty
TSM1
Preparing the environment
1. Install Microsoft Windows 2008 ServerR2 in accordance with the current Setup Guide for a Windows
2008 R2 stand-alone server. Do not configure Active Directory on TSM1. Active Directory is only required
on TSM2.
2. Create an administrator called labadmin with password Object00.
3. Disable User Account controls. To turn off UAC. follow these steps:
a. Click Start > Control Panel.
b. In Control Panel, click User Accounts.
c.
d. In the User Accounts tasks window, click Turn User Account Control on or off.
e. If UAC is currently configured in Admin Approval Mode, the User Account Control message appears.
Click Continue.
f.
Clear the Use User Account Control (UAC) to help protect your computer check box, and then click
OK.
g. Click Restart Now to apply the change right away, or click Restart Later, and then close the User
Accounts tasks window.
4. Ensure the ALL IDs and passwords are set up to NEVER expire.
5. Ensure the Administrator ID labadmin is a member of the Administrators group.
6. Change system name to TSM1.
7. Partition the hard drive or add additional disks in your virtual machine using the following settings:
C:100
D: is
E: 10
F: 10
G: 10
H: 10
I: 10
GB primary
the CD/ROM drive (you may or may not have this drive)
GB
GB
GB
GB
GB
8. Set the IP address for each system to a unique address and also set the computer name to a unique
name on each system. TSM1 is 192.168.100.50, TSM2 192.168.100.80.
9. Make sure a supported browser is installed.
10. Create C:\scripts directory and copy all scripts to this directory. Scripts can be found in the classroom
setup directory.
11. Create the c:\drm directory and copy the drm instruction files to this directory.
12. Extract the TSM 7.1. client installation files into the directory C:\TSM_Images\Client.
13. Extract the TSM 7.1. server installation files into a directory named C:\TSM_Images\Server.
14. Extract the TSM 7.1. OperationsCenter files into a directory named OC.
Copyright IBM Corp. 2014
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
12
15. Create a C:\critical folder and copy the critical and accounts files from the classroom setup directory for
use in the labs.
16. Create a C:\Accounts directory and copy the accounts files from the classroom setup directory to here
for use in the labs.
17. The labs will work with a supported version of either Microsoft Internet Explorer Mozilla Firefox.
18. Ensure each machine has 16 GB RAM during installation. When install is complete you can reduce the
RAM to 7 GB each if you need to run both virtual machines on one host system.
13
IBM Tivoli Storage Manager 7.1 Advanced Administration, Tuning, and Troubleshooting
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
14
15
IBM Tivoli Storage Manager 7.1 Advanced Administration, Tuning, and Troubleshooting
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Verification procedures
Use the following information to verify the installation and configuration of the student and instructor lab
environments. Estimated verification time for one system label is 2 hours or less.
Perform the exercises for Unit 2, start the server, and connect with administrator admin1. If this task is
successful, your setup is verified.
16
17
18
19
Part 5. Appendix
20
TSM1
3.2 GHz
1 GB RAM
Software
see page 14
see page 7
<isolated/singl
IBM Tivoli
e>
Storage Manager
Extended Edition <Internet>
Windows
Network
Adobe Reader
<DHCP>
Mozilla Firefox
<other>
Verify
see
page 16
Notes
In Table 8, place a check mark by each requirement as you fulfill it for each system label.
When you have completed the setup for one student system, place a check mark in the last
column until you have checked the number of required student systems.
1 GB RAM
100 GB Hard
disk
1024 x 768
Display
Operating
system
Software
see page 14
IBM Tivoli
Storage
Manager
Windows Extended
Edition
2008
64-bit
see page 7
Verify
see
page 16 Number of students
1 2 3 4 5
<isolated/sin
gle>
<Internet>
<DHCP>
21
Network
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Important:
Be sure to give the instructor a copy of this page with the values that you set.
IBM suggestion
labadmin
labadmin
db2user1
client
admin1
Your value
Object00
Object00
Object00
client
admin1
22