You are on page 1of 86

Lecture: Renewable Energy Sources

section 2: Direct use of solar radiation energy

2.1 Performance solar radiation energy

2.2 Low-temperature collectors (NT)

2.3 NT-Application

2.4 High temperature collectors (HT)

2.5 HT-Application

2.6 photovoltaic

16/11/16 2009 UNIVERSITT ROSTOCK


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

2.1.1 Extraterrestrial radiation (outside the earth)


Sun draws its energy from the fusion of hydrogen nuclei, which are present as plasma
inside the sun
Fusion process in the sun

Matter Radiation electromagnetic radiation


(Son Light ) wavelength of =10-20 m
in near sea ca. 400 km/s (cosmic rays) till =1 km
(Electron , Proton) (HF-Radiation)

Sun is a fusion reactor and consists of 75% H2 und 25% He

- important process (98,5% of sun energy)


ist the p-p-cycle (Proton-Proton) according to Beth und Critchfild
Stellar nucleosynthesis
- strongly exothermic character Energy is emitted in the form of heat to the
environment (1% mass loss)

16/11/16 2009 UNIVERSITT ROSTOCK 2


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

P-p- circle (Proton-Proton-Reaktion):

triggered by the enormous pressure and gravitational forces of the sun is carried out a multi-step
fusion process of hydrogen into helium
in the first and most common reaction two H2-nuclei (Protonen; p) merges into one

Deuterium (2H), wherein a position (e+) and an electron neutrino ( ) are free.

In the second reaction a Deuterium (2H) and an another Proton (p) merges into a light
Helium 3 core (3He), unter Abgabe von Gammastrahlung ( ).
in der dritten Reaktion fusionieren zwei Helium-3-Kerne (3He) zu einem Helium-4-Kern (4He)
und setzen dabei zwei Protonen frei.

Quelle: Stieglitz; Heinzel Thermische Solarenergie

16/11/16 2009 UNIVERSITT ROSTOCK 3


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy
Bilanz p-p-Zyklus:
The total energy supplied for the hydrogen-helium nuclear fusion an amount of 0.267 Mev

4 p 24He 2s 26,72MeV [MeV] = Mega-Elektron volts


(Einheit der Energie/Teilchenphysik)

From the einstein formula the mass defect discharged completely in power will be 0.7%

PFussion , Sonne m
* c2
Formation of 1g helium will release 200 Mwh energy
sun burns 564 million tonnes of hydrogen to 560 million tonnes of helium per second

- 4 million tonnes of pure energy will be emitted

- Sun becomes lighter than present day (in 4.6 billion years)

- Actual mass of sun 1.98892 x 1030 kg burns for 5 billion years

- then cool down, inflate shrink [red giant]

[white dwarf] [Black dwarf] [black hole] ~ 1018Jahre


- 4 1018Jahre

16/11/16 2009 UNIVERSITT ROSTOCK 4


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

radiation:
Index "e" for physical quantities of radiation

dWe
Radiation flux e
dt
Radiation energy transported per time unit (in the visible range)"
Units (W)

specific radiation (radiation flow density):

d e
De
dA

Radiation energy emitted per unit time area as"


Unit [W / m ]

16/11/16 2009 UNIVERSITT ROSTOCK 5


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Stefan-Boltzmann law:
Specifies the power radiated by a black body heat depending on the
temperature.

DeS * TS4

5,67 *10 8 W
m2 K 4
Stefan-Bolzmann-Constant

DeS Radiation flux density of the black body
(absorption coefficient of ideal body

Max thermal radiation)

experimentally discovered in 1879 by Josef Stefan


in 1884 by Louis Balmi theoretically derived Stefan Bolz man Law
in 1900 Max Planck discovered the Planck's law of radiation from the the Stefan Bolz man law
through integration of all directions & wavelengths.

16/11/16 2009 UNIVERSITT ROSTOCK 6


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Radiant energy "not black body", with ambient temperature T2:

e De * A * * A * (T14 T24 ) [W]

integral emission cofficient

-Depending on the surface (color, structure,...) good: black and dull


- independent of [ f ( )]

ambient temperature
T2

16/11/16 2009 UNIVERSITT ROSTOCK 7


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Stefan-Boltzmann law:

The sun can be assumed to a good approximation as a black body with 5762 K
Irradiance of the sun's surface

DeSo * TSo4 eSo 62,49 *106 W
ASo m

Radiant power of the Sun

eSo DeSo * ASo * TSo4 * * d So


2
3,8 *10 26 W

with ASo * d So
2
(Kugel)

Sonnendurchmesser d So 1,39 *106 km

Frage: Which irradiance De arrives at the Earth?


Solar constant, on the earths surface (without atmosphere)

De
DeSo

16/11/16 2009 UNIVERSITT ROSTOCK 8


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Wien's displacement law:

gibt an, bei welcher Wellenlnge ein nach dem Planckschen Strahlungsgesetzt strahlender
schwarzer Krper je nach seiner Temperatur die grte Strahlungsenergie abgibt.

Connection between temper39ature of the black body with the most radiated
wavelength
Radiation spectrum of a black body
3
max * T konst 2,818 *10 mK

Quelle: Stieglitz; Heinzel Thermische Solarenergie


Planck's radiation spectrum for different temperatures

De()
Strahlungs-flussdicht 1000 K
e

800 K

Wellenlnge
[m]
max

16/11/16 2009 UNIVERSITT ROSTOCK 9


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Spectrum of solar radiation:

the solar radiation is radiated throughout in the corrugated length range from 0,276 to 4,96 m
90 % of the radiation = 0,3 1,5 m (visible and near IR-area)
Maximum intensity at 0,5 m
Solar constant is thus equal to the area under the curve


De De ( )d
0

De()
7% 47% 46%

black body
(5900 K)

extraterrestrische Sonne
(AM0)

wavelength
0,38 0,78 3 [m]
(visible area)

16/11/16 2009 UNIVERSITT ROSTOCK 10


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

AIR mass condition (AM):

1
AM
sin( h 5)

h Altitude angle of the sun


AM0 ...outside the atmosphere Atmosphere

AM1 ... at sea level by verticle irradiation of the


atmosphere

AM1,5 ...1,5time the verticle path through the


atmosphere
(efficiency statement)

earth's surface
Quelle: Stieglitz; Heinzel Thermische Solarenergie

16/11/16 2009 UNIVERSITT ROSTOCK 11


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

2.1.2 Terrestrial radiation (on Earth usable)

Atmosphere passage weakening in all wavelenghts


absorbance (lat. Exinction)

only two windows at the earths surface (rest stopped by absorbance)


visible / RF radiation

majority of the IR spectrum is absorbed by water, carbon dioxide and trace


gases.. Two transparent areas remain (3-5 m and 8-12m)
I II

Quelle: thermografie.d

Window I Window II
visible / 1m RF range
De=1kW/m De=10-9W/m
technically
usable

16/11/16 2009 UNIVERSITT ROSTOCK 12


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Components of the terrestrial radiation


De

Extraterrestrial radiation De
De De
auf die Atmosphre treffende Sonnenstrahlung
De
Global radiation DeG
on the earth's surface impinging solar radiation (to reduce the account of losses in the
atmosphere)
Atmospheric losses: reflection, scattering, absorption

DeD
direct radiation
weakened by scattering and absorption extraterrestrial radiation

DeH
diffuse sky radiation
by dispersion of the direct radiation on the earth's surface suitable radiation

16/11/16 2009 UNIVERSITT ROSTOCK 13


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Radiation balance of the Earth

on the earth's surface suitable radiation ~50% of the extra-terrestrial radiation


reducing effect reflection of atmosphere and Earth's surface, Scattering in Atmosphere and
absorption by atmosphere
long wave atmospheric counter-radiation exceeds the power density of the global
radiation, but its wavelength corresponds to the temperature of the earth's surface
no use on panels possible

shortwave Longwave
Total radiation radiation radiation
100 % Albedo 72 %
28 % 3%
CO2- & H2O-Emission
64 %
20%
Absorption
(Wolken, Ozon, H2O,
5% Absorption
Staub, Dunst)
(Wolken)
25% 109 % 13 %
Streuung
5% 25 %

2%
Reflexion 1% Reflexion Heat
teansport-
Direct radiation 29 %
22 % diffuse Strahlung 25 %

47 % Earths surface longwave 114 % 96 % atmospheric


radiation back radiation

16/11/16 2009 UNIVERSITT ROSTOCK 14


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Transmissionsgesetz

The radiation balance of the Earth system atmosphere differs regionally and temporally
from one another
Transmissionsgesetzt describes reflection (Albedo) and scattering and absorption
(losses in the atmosphere)
Both effects are dependent on the wavelength

De
Transmissionsfaktor (at the vertical irradiation) Longwave radiation DR

Atm.. back radiation DA

G DeD direkte
De Globalstra hlung Global radiation DeG
Reflected radiation DeG,R
1 2 3 4 10 11 12
t [Monat]
RS
G RS * MS * Ab Rayleigh scattering (particles d << )
MS Mie scattering (dust & aerosols, d )
Ab absorption (Gas)
RS , MS , Ab Are table values

16/11/16 2009 UNIVERSITT ROSTOCK 15


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Rayleigh scattering in dependence to wavelength


Rayleigh scattering ( RS )
Rayleigh-Streuung
ideal Atmosphere (without impurities)
happen on particles d (molecules in the air)
Quelle: TU Dres
the shorter , the stronger is the scattering
responsible for effect color of the sky
(blue sky Himmel, red evening sun / red light has lower
frequency than blue light)
RS 0,906
for vertical irradiation (m=1, h=90 AM1)

Mie scattering ( MS )

Scattering of particles (dust & impurities in the air)


dependent on the aerosol content of the air and to a lesser extent of
Distinction of four categories:
- highlands MS 1
- lowlands MS 0.925
- big city MS 0.839
- industry MS 0.744 (AM1 applicable for all )
16/11/16 2009 UNIVERSITT ROSTOCK 16
2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Gas absoption ( Ab ) Gas-Absoption


Steam obsorption
depending on optical path lengths and composition of the atmosphere
mainly by H2O and other greehouse gases
steam main part of the weakening (78 %)
Ozone (short-wave UV-light is obsorbed), oxygen (little), CO2 (long wavelength light &
infrared greenhouse effect)
Ab 1 (ideal atmosphere)
Ab 0,913 (normal atmosphere, h=90)

16/11/16 2009 UNIVERSITT ROSTOCK 17


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

opacity factor ( r ) Trbungsfaktor


Summary of scattering and absorption behavior in the atmosphere
indicates, how much Rayleigh atmosphere correspond to the state of the
atmosphere (table value)
it is in the following relationship to the transmission factor
r
G RS * MS * Ab RS
ln MS ln Ab
r 1 (vertical irradiation)
ln RS
opacity factor varies regionally and temporally, and is intended for vertical irradiation
due to the higher water vapour content, the opacity factor is higher in summer than
winter
middle opacity factor:
city = 3,7
highland = 2,15

16/11/16 2009 UNIVERSITT ROSTOCK 18


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

adjustment of an angled radiation on the earths surface

DeD r *m
De
G Rs sin( h ) Rs r
De
m H=1
H 1
Atmosphere passage m h n=0
sin( h) sin(h) DeD

Radiation on inclined surface r


DeDg De * cos( ) De * Rs sin( h ) * cos( )
- Solar constant inclined surface:
geneigt inclination angle Lot
g n De
Dip angle (Psi) on inclined surface
Deg De
m
Sun elevation angle H=1
h
- applies to idealized, plane-parallel, homogeneous atmosphere h n
- Praxis: Application of approximate formula(For Ex. German weather service) DeD

r
( 0 , 9 9 , 4*sin( h ))
DeDg De * e * cos( )

16/11/16 2009 UNIVERSITT ROSTOCK 19


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Sky radiation

in Germany, the diffuse sky radiation exceeds the direct radiation


significantly (see example HH)

De
whole
Global radiation DeG

direct DeD

diffuse DeH

t [month]
1 2 3 4 10 11 12

Performance and shares of global radiation DeG (HH, Germany)

hidden sun
clear blue sky overcast sky
hazy/cloudy
DeG [W/m] 600 1000 200 - 400 50 150
DeH/DeG[%] 10 - 20 20 - 80 80 - 100

16/11/16 2009 UNIVERSITT ROSTOCK 20


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Sky rediation Himmelsstrahlung


Sunmap Europe: global radiation on average 1981-2000 [kWh/ma]
average annual global radiation in
kWh
Hamburg:978 m a
Mnchen:1088
Vienna: 1120
Marseille: 1860
Sahara: 2500

Quelle: renewable-energy-concepts.com
Germany:
Annual average 115 W/m
Bright sunny days 600 W/m
DeG
Equator: [W/m] Honolulu

Bright sunny day 1000 W/m


Hamburg

t [month]
1 2 3 4 10 11 12

16/11/16 2009 UNIVERSITT ROSTOCK 21


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Determining the angle of inciden ( ) in dependence on time and place

from the solar constant and coordinate, the radiation flux for each location and
time are calculated
Angle of incidence depends on the inclination angle, location, reception area
and Sun
Assumption: spherical earth

DeG Lot
n

Determining the angle of incidence Lot


for all points of the earth:

cos( ) cos(n) sin(b) cos(b) cos(a) sin(n) sin( ) b


(b-n)
sin(b) cos(a ) sin(n) cos(n) cos(b) cos(n) cos(t * ) b Breitengrad
sin(a ) sin( n) cos( ) sin(t * ) n Neigungswinkel
Einfallswinkel
a Azimut (S,N=0)
t* Hour Angle of the Sun Ost positiv
West negativ
a azimuth angle (b-n) scheinbare Verschiebung
der Breite
Declination of the sun
16/11/16 2009 UNIVERSITT ROSTOCK 22
2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Declination of the sun

Declination of the sun ( )


N

Angle between Sunbeam and equator the Earth's interior =0


21.03
0 21.Mrz (beginning of spring)
23,5 21.Juni (beginning of summer) N
S
N

0 23.September (beginning of autumn) =23,5


S
=-23,5
21.12
21.06
-23,5 21.Dezember (beginning of winter) N
S S

Determination the declination angle on any day of the =0


year: S 23.09

Declination of a celestial body

J day of the year (0 to 365)


23,5 cos( ( J 10)) [Grad]
365,2

Quelle: geoastro
16/11/16 2009 UNIVERSITT ROSTOCK 23
2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Hour Angle of the Sun (t*)

noon 0
forenoon positive afternoon negative
arises from the rotation speed of the earth

t * (12h WOZ ) 15 [Grad]


h

t * (720 min WOZ ) 0,25


min
WOZlocal apparent time

Depending on the location of the concerned place, WOZ differs significantly from the GZ
(legal time)

e.g.. almost all Western European countries have CET and CEST
wahre Ortszeit

WOZ GZ (0 ) 4 z z Correction link for Earths disturbance


0 reference Meridian MEZ 0 15
MESZ 0 30
Actual time West positive
East negative
0 in Prime meridian (Greenwich)

16/11/16 2009 UNIVERSITT ROSTOCK 24


2. Direkte Nutzung der solaren Strahlungsenergie
2.1 Darbietung solarer Strahlungsenergie

Simplified calculation of the angle of incidence ( )

full formula cos( ) cos(n) sin(b) cos(b) cos(a) sin(n) sin( )


sin(b) cos(a ) sin(n) cos(n) cos(b) cos(n) cos(t * )
sin( a) sin(n) cos( ) sin(t * )

Assumptions: Azimuth a 0 (facing south)


tilting n 0 (lies on the ground surface) Azimuth angle

Quelle: europe-solar
cos( ) sin(b) sin( ) cos(b) cos( ) cos(t * ) (use of law of cosines)

cos( ) cos(90 h)

16/11/16 2009 UNIVERSITT ROSTOCK 25


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

DeG Lot

Zeiten fr Sonnenauf- und Sonnenuntergang
n

Time of sunrise and sunset


Lot

Determining the time on the hourangle (t*)
Bestimmung der Uhrzeit ber den Stundenwinkel
*
( t WOZ GZ )
((b-n) b )
Assumption: elevation angle h 0
cos( ) 0 and 90
Annahme: Hhenwinkel
=90
h=0

a=0
sin(b) sin( )
cos(t * )
cos(b) cos( )
[Grad]
t * arccos tan(b) tan( ) [Grad ]

16/11/16 2009 UNIVERSITT ROSTOCK 26


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

2.1.3 Measuring solar radiation energy

Measurements of the German Weather Service and other meteorological institutes


Distinction between direct and diffuse sky radiation is difficult

Majority of the weather stations measure the global radiationDeG

Moll-Gorzynski-Pyranometer

hour summation
error 3 %
It measures the global radiation
Forced circulation avoids the influence of the ambient temperature
measure of diffuse sky radiation with shadow ring

16/11/16 2009 UNIVERSITT ROSTOCK 27


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

Quelle: sonnensche

Sunshine recorder according to Campbell-Stokes

For the calculation of the cloud cover and sunshine duration


Burns the SSD on a burning Strip through magnifying glass effect of a glass ball
only direct solar radiation
threshold value ~ 200 W/m
direkte Brennstreifen-
Strahlung papier

Glas-
kugel

Pyrheliometer

Measurement of direct solar radiation


continuous alignment (tracking) on the sun needed Quelle: Quaschning

direct
aperture 5 radiation

tracking
v-Messung
(wie bei Pyranometer)

16/11/16 2009 UNIVERSITT ROSTOCK 28


2. Direct use of solar radiation energy
2.1 Performance solar radiation energy

2.1 solar constant

geg: TSo = 5762 K


dSo = 1,39*106 km
1AE = 1,5*108 km
= 5,67 *10-8 W/m2K4

ges: Solarkonstante auf der Erdoberflche De [W/m]

dSo
De
DeSo

1AE

16/11/16 2009 UNIVERSITT ROSTOCK 29


2. Direct use of solar radiation energy
Exercises

2.2 Wien's displacement law

geg: TSo = 5762 K

ges: max of sun radiation [m]


elle: ceramic-energy

16/11/16 2009 UNIVERSITT ROSTOCK 30


2. Direct use of solar radiation energy
Exercises

2.3 radiated power

a) rooftop
given: U = 27 C = 5,67 *10-8 W/m2K4 Dach = 87 C
A = 1m = 0,93
searched:power P pro m

b) hotplate
given: 10% convection PPlatte = 1kW dPlatte=20cm
U = 20 C TU = 293K = 0,5
searched:Temperature of the plate Platte

c) human being
given: U = 0 C AMensch = 2,5 m Mensch = 32 C
searched:radiated power [W] for = 1 (black body and = 0,5

16/11/16 2009 UNIVERSITT ROSTOCK 31


2. Direct use of solar radiation energy
Exercises

2.4 Solar radiation offer (DeD) on horzontale surfaces in


Rostock, Abu Dhabi und Dakar

given: - Dakar 1444N 1726W


- Abu Dhabi 2414N 5417E
- Rostock 546N 128E

- opacity factor r = 3
DeG Lot
n
searched: solar radiation offer DeD
Lot
for 21.12.und 21.6.
CET and GZ at 12:00
b
(b-n)

16/11/16 2009 UNIVERSITT ROSTOCK 32


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

2.2.1 construction and operation

direct use of solar radiation energy

photovoltaics Solar Therman photolysis


(power) (Hydrogen future)

NT-applications HT-applications
(till 300 C) (above 300 C)
(heat) (power) Example: tube-type observer
Reflexion
DeG = DeD + DeH Therman radiation,
convection
Wind, Regen
Common collector types: windschield
Konvektion (one or more times transparent)
- Rhrenabsorber
absorber
- Flachkollektor
- Vacuum collector Tubes with medium heat
(Usually water with antifreeze)
- other Kollector types
Therman insulation
Of the back side

16/11/16 2009 UNIVERSITT ROSTOCK 33


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Classification of low-temperature collector systems

Tube-type absorber: - simple (usually plastic) and inexpensive


- absorbeer mats are rolled out on flat roofs
- Low efficiency (heat loss)
- Use only when temperature slightly above ambient temperature
- no operation in winter
Application: swimming pools

Flat-plate collector: - additional measures for heat insulation


- Special anti-reflective glass cover (use the greenhouse effect)
special importance of the optical properties
- water heating and heating support
- Up to temperature differences of 70K collector yet achieved acceptable
efficiencies
- Heat medium water (required for a year-round operation frost
protection)
- Seperation of collector and hot water curcuit
Application: Water heating
16/11/16 2009 UNIVERSITT ROSTOCK 34
2. Direkte Nutzung der solaren Strahlungsenergie
2.2 Niedertemperaturkollektoren (NT)

Classification of low-temperature collector systems

Vacuum collector: - almost optimal thermal insulation inside the collector


(only therman radiation minimization by special coating)
- Absorber strip inside of an evacuated glass bulb
- Heat transfer to the equipment circuit either directlz or via heatpipe
system

A) Vacuum tupe with a direct connection (coaxial type)


- Absorber connected directly to the heat exchanger tube ( drained by medium)
- Heat exchanger flows into manifold
- Deviation from south by rotating tube compensated (max. ~25)

Source: Stieglitz; Heinzel Thermische Solarenergie


Vacuum tube with a direct connection to the equipment circuit

16/11/16 2009 UNIVERSITT ROSTOCK 35


2. Direkte Nutzung der solaren Strahlungsenergie
2.2 Niedertemperaturkollektoren (NT)

Classification of low-temperature collector systems

B) U-tube collector
- two glass tubes nested (welded together and evacuated)
- Absorber deposited on inner tube
- Heat is released into the absorber embedded heat sheets (incl. Adsorber tube)
- CPC mirrors allow the further processing also back-sided on the absorber of
suitable radiation
- in stagnation, the coolant runs back side and cause severe cooling
(till 100C/sec.), at this point no return is possible
consequence:high therman stresses and high material stress
- in practice more of the coaxial type is used

Quelle: Stieglitz; Heinzel Thermische Solarenergie


Vacuum tube with direct flow U-tube

16/11/16 2009 UNIVERSITT ROSTOCK 36


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Classification of low-temperature collector systems

C) Heat-Pipe-System
- further spreads than flowed through variations
- cloesd on both sides with heat pipes with fast vaporizing liquid (e.g. methanol)
- Heat is transferred from the obserber to the liquid, which is then vapeorizes and
rises to the top Construction requires a minimum installation angle
- in the heat exchanger (upper end), the steam condenses and delivers the warmth
to the secondary circulation
- low maintenance (tubes in operation is individually replaceable)
- Self-protection against overheating
- low pump power Operation of Heat-Pipe-System

Quelle: Stieglitz; Heinzel Thermische Solarenergie


- Optimization with CPC-mirrors
- high price compared to coaxial
type

16/11/16 2009 UNIVERSITT ROSTOCK 37


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Classification of low-temperature collector systems

Other collector variants:

Vacuum flat collector


- mixture of vacuum and flat plate collector
- absorber in special and evacuated tub
- less expensive construction but also lower efficiencies

memory collector
- Collector and DHW cylinder form one unit (complete solar system)
- In fron,t transparent thermal insulation; in the back side well insulated
- Application possible in frost-free areas

air collector
- heat-carrying air, othewise construction is like flat plate collector
- Use to raise the building air or drying hay, grain etc.

16/11/16 2009 UNIVERSITT ROSTOCK 38


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Classification of low-temperature collector systems


Quelle: Stieglitz; Heinzel Thermische Solarenergie

16/11/16 2009 UNIVERSITT ROSTOCK 39


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

2.2.2 Optical properties of absorbers and cover

The special significance should be attached to the optical


properties of materials

Transfer of heat can take place in three ways


- convection Useful heat
Global-strahl Reflection,
- radiation ung convection,
radiation convecion

- line Strahlung absorber


Wrme-Leit
frame convection
ung
cover + +
absorption tube Isolation
Absorber:
- important component Reflexion, Konvektion,
Strahlung
collector

- conversion of short-wave radiation into heat


( ) (window I)
Exposure to the absorber:
High absorbency ( )

16/11/16 2009 UNIVERSITT ROSTOCK 40


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Absorption coefficient ( ) absorbierte _ Strahlung


f ( )
gesamte _ Strahlung

black body ( ) 1
Carbon black, velevet ( ) 0,9
but:
According to Kirchhoff's law of thermal radiation, a high absorption coefficient requires a large
emission coefficient

at large large that means Where a lot is absorbed,


there is also radiated a lot
Emission coefficient ( )
abgestrahlte _ Energiemenge

abgestrahlte _ Energiemenge _ eines _ schwarzen _ Krpers _ gleicher _ Temperatur

, f ( , )

Wavelength dependency Utilization by selective absorber layers

16/11/16 2009 UNIVERSITT ROSTOCK 41


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Goal: Absorption und Emission

bigger S
IR in the visible range (lot of short-wave absorption)

smaller S
IR in the IR range (little longwave radiation) 1
good
S relationship
good relationship 0.5
IR

visible 1m IR

Reached by:
- trapezodal notched surface (S/IR 3)
- vapor deposition of semiconductors, coatings, chromium
For ex. Balck nickel (S/IR 13)
Black chromium (S/IR10)
- Disadvantage: - Temperature and weather sensitive
- higher procution costs

16/11/16 2009 UNIVERSITT ROSTOCK 42


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Reflection coefficient ( )
reflektierte _ Strahlung

Gesamtstrahlung

Radiation is reflected, which is not absorbed.


For non-transparent layers (absorber) applies therefore: 1

goal: Reflection

selective absorber
- Short-wave no reflection
- long-wave high Reflection

Absorbed energy is dissipated by


- radiation IR
- Convection losses

- heat transfer to the working medium

16/11/16 2009 UNIVERSITT ROSTOCK 43


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Reflexion coefficient ( )

Measures to reduce losses (main demand on the front side)


- Isolation on side and rear walls (convection back side)
- one or more coats of paint/discs (convection front side)
- Vacuum (Convection front side)
- selective absorber layers sichtbar big
- for transparent films, it is difficult to prevent the radiation on the front

Similar to selective absorber layer, the cover must display high transmission
coefficient for short wavelengthspectrum

16/11/16 2009 UNIVERSITT ROSTOCK 44


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Transmission coefficient ( )
durchgelassene _ Strahlung

Gesamtstrahlung

Forderung: - short-wave as large as possible


- long-wave as short as possible
for transparent layers thus applies:

1 what is not reflected or obserbed, is transmitted in


transparent layers.

Ex.:: Window glass Optimization:


visible area IR area steam IR-absorbing layer (Indium oxide, zinc oxide, etc.)
0,02 0,94 * Indium oxide Zinc oxide

0,01 0,06 visible area IR area visible area IR area

0,97 0
0,1 0,15 0,2 0,16
0,05 0,85 0,01 0,84
0,85 0 0,79 0
* a large requires a large
large radiation losses in the IR range
16/11/16 2009 UNIVERSITT ROSTOCK 45
2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

2.2.3 Useful heat and efficiency

DeA * AK N K S R [W] DeA Total radiation on the absorber


AK absorber surface
N Dissipated useful flux
K Convection losses
Therefore follow S radiation losses (long wave)
R Reflection loss
V K S
Waste heat power:
At the vertical irradiation DeA * AK * DeG , g * AK DeG , g global radiation on inclined surface
Reflecion on absorber R * DeG , g * AK * A Transmission coefficient
A Reflexion coefficient
* DeG , g * AK N V * DeG , g * AK * A A 1 A

N * DeG , g * AK * (1 A ) V
Useful heat

16/11/16 2009 UNIVERSITT ROSTOCK 46


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Useful heat

Loss heat flow V is very dificult to calculate, therefore imperical values for each collector
type are determines
Emperical formula: V u L * AK * ( A U )
u L Heat transfer coefficient of the
absorber [W/mK] (experimental)

N * DeG , g * AK * A u L * AK * ( A U ) A absorber temperature

U Ambient temperature
N
N * DeG , g * A u L * ( A U )
AK

specific useful heat

16/11/16 2009 UNIVERSITT ROSTOCK 47


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Efficiency

der Wirkungsgrad gibt an, welcher Anteil der Globalgesamtstrahlung, die auf die Absorberflche
trifft, in eine nutzbare Wrmeleistung umgesetzt werden kann.
not constant but depends on the radiation power of the sun and temperature difference between
the absorber and the surrounding area
The higher the temperature of the absorber and the lower the ambient
temperature, the more heat is lost.

N u * ( A U )
* A L
DeG , g DeG , g
100%
Optical losses
0=80%
uL termal loses
0 * ( A U )
DeG , g
Net power
Efficiency
uL*(vA-vU)
DeG,g
0 80% Conversion factor = optical losses

16/11/16 2009 UNIVERSITT ROSTOCK 48


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)


Efficiency 100%
Optical losses
0
Therman losses
Efficiency curve only experimentally determined
Net power

uL*(vA-vU)
A purely theoretical point A B C DeG,g

(Heat losses 0, but no temperature gain) A U


B Standstill temperature reached (critical temperature difference
(no net power; only heat losses) Nutzflu 0

Efficiency flat plate collector Efficiency vacuum collector

Quelle: Stieglitz; Heinzel Thermische Solarenergie


16/11/16 2009 UNIVERSITT ROSTOCK 49
2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Solar coverage rate DRS

"What percentage of the heating demand in my system will be covered by solar energy?"

genutzte Solarenerg ie
DRS 0 DRS 1
gesamter Heizwrmebedarf
no full
use use

Solar coverage rate

Quelle: ecoquent-positions Quelle: oekotech-erbse

16/11/16 2009 UNIVERSITT ROSTOCK 50


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

Quelle: Para Digma


Flachkollektor

Comparision of collector characteristics


Rhrenkollektor

Tube collector has technically advantage (low loss less space


requirement)
Especially when solat heat demand is at highest (in Winter),
flat-plate collectors recorded comparatively low yields
Heat pipe systems have the highest efficiencies, but they are
more expensive
Comparison of flat and tube collectors
Evacuated Tube Collector

compare flat plate collector CPC-tube collecto advantage CPC


Flachkollektor
characteristics

16/11/16 2009 UNIVERSITT ROSTOCK 51


2. Direct use of solar radiation energy
2.2 Low temperature collectors (NT)

2.5 Solar coverage rate DeG

given: Standort:
U = 17,6C K = 70C
tB = 6h
17,6C
We = DeG,g * tb= 4,71 /m*d
kWh

collector:
0 = * = 0,82
Heat dissipation: uL,K = 6 W/m*K
AK = 6 m 20C
+45C
K = 70 C
+10C

accumulator: household: Gas: water:


S = 45 C 4 Personen caloric value c = 1,16 Wh/kg*K
U,S = 20 C 70 l/Person*d HGas = 10 kWh/m (specially. Thermal conductivity)
uV,S = 4 W/K 280 l/d Gas = 0,85

searched: - WH (used heat energy) - WV,S (lost accumulator)


- WGes (WH + WV,S) - WSol (enegy absorbed in the collector)
- DRS - VGas (Saving gas volume)

16/11/16 2009 UNIVERSITT ROSTOCK 52


2. Direct use of solar radiation energy
2.3 Low-temperature applications

2.3.1 Brauchwassererwrmung

Quelle: Stieglitz; Heinzel Thermische Solarenergie


Thermosiphonanlage Schwerkraftanlagen

einfachster Typ (sehr hufig in wrmen Lndern)


geringe Investitions- und Betriebskosten
Komponenten:
- Kollektor
- Tank bzw. Speicher
- Rohrleitung
Brauchwassererwrmung
Kreislauf nur durch Erwrmung im Kollektor angetrieben
- Tank hher als Kollektor
- Kollektor erwrmt Flssigkeit 0 > i
- somit entsteht ein Druckunterschied (Auftriebsdruck),
der das Wasser in den Speicher flieen lsst

- kaltes Wasser fliet automatisch nach


- weder Zwangsumlauf noch Regelung erforderlich
16/11/16 2009 UNIVERSITT ROSTOCK 53
2. Direct use of solar radiation energy
2.3 Low-temperature applications

Aufbau Thermosiphonanlage

Thermosiphonanlage Schwerkraftanlagen Vorlauf Speicher


Solarstrahlung (oberhalb des
DeG m Kollektors) H4

Auftriebsdruck 0 H H3 (H3>0)

H2
H1
ideal: PA ( i 0 ) * g * H [N/m] Kollektor
i
i Dichte am Kollektoreintritt Rcklauf H = *H1 + H3 + *H4

0 Dichte am Kollektoraustritt
Hhe der Wassersule

H Hhe der Wassersule i Input-Temperatur


o Output-Temperatur
Massenstrom

- Beruhend auf dem thermosiphonischen Effekt


- Herleitung aus Volumenstrom
* r 4
(Hagen-Poisenillesches Gesetz V * P [m/s] )
8 * d * l
m
* V

mit ( o i ) * i * K
d Volumenausdehnungskoeffizient
( o i ) * i * K dynamische Zhigkeit [kg/m*s]
(1)
f ( v k )
m
(linear)
16/11/16 2009 UNIVERSITT ROSTOCK 54
2. Direct use of solar radiation energy
2.3 Low-temperature applications

Thermosiphonanlage Schwerkraftanlagen

Leistungsbilanz am Kollektor

K * DeG , g * AK m * cK * K cK spezifische Wrme des Fluids


DeG , g Globalstrahlung, geneigt
K * DeG , g * AK

m
cK * K (2)

f( 1
m ) (hyperbolisch)
vk

Arbeitspunkt

- Schnittpunkt von (1) & (2) ist der Arbeitspunkt


- durch Thermosiphoneffekt steigt der Massenstrom mit zunehmendem K im Kollektor
an
- die Massenstromzunahme fhrt gleichzeitig zu einem sinken der Temperaturdifferenz

im Schnittpunkt der beiden Kurven stellt sich der AP des Systems ein

16/11/16 2009 UNIVERSITT ROSTOCK 55


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Thermosiphonanlage Schwerkraftanlagen

Arbeitspunkt (2)
m Leistungsbilanz
H2 H2>H1
8 * d * DeG , g * AK * K * L
K
* g * * cK * H * R 4 i (1)
H1 Thermosiphon-eff
ekt

2 DeG , g * AK * K * * g * H

m *R * i *
8 d * cK * Leff K
AP

Hheneinfluss: DRS

H m
k =genutzte Wrme

DRS
H
- W bleibt gleich, aber Verluste nehmen etwas ab
- ab bestimmten H lohnt sich der technische Aufwand aber nicht mehr (Sttigungseffekt)

16/11/16 2009 UNIVERSITT ROSTOCK 56


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Thermosiphonanlage Schwerkraftanlagen

Gestaltung von Thermosiphonanlagen Rckschlagventil

DeG
a) offene Systeme (Einkreislaufanlage)

- ohne Wrmebertragung im Speicher


(Trinkwasser im System)
- lediglich Rckschlagventil notwendig
(gegen die Umkehr des Thermosiphon-Effekts in der Nacht)
- Frostgefahr

Quelle: Stieglitz; Heinzel Thermische Solarenergie


- Korrosionsgefahr

b) geschlossene Systeme (Zweikreislaussystem)


DeG
- Wrmebertragung von Solarkreislauf auf Speicher ber
Wrmetauscher
- Frost- und Korrosionsschutzmittel einsetzbar

16/11/16 2009 UNIVERSITT ROSTOCK 57


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Quelle: FHTW Berlin


Zwangsumlaufsysteme

Bestandteile:

Kollektor
Rohrleitungen
(Verbindung zwischen Kollektoren und Speicher)
Solarflssigkeit
(Transport der Wrme vom Kollektor zum Speicher)
Wrmespeicher (Speicherung ber mehre Tage)
Solarpumpe (Zirkulation der Solarflssigkeit im Kreislauf)
Solarkreiswrmetauscher
(bertragung der Wrme an Trink- oder Heizungswasser im Speicher)
Armaturen und Einbauten zum Befllen, Entleeren und Entlften
Sicherheitseinrichtungen (Ausdehnungsgef und Sicherheitsventil
zum Schutz der Anlage vor Schden durch Volumenausdehnung)
Solarregler

16/11/16 2009 UNIVERSITT ROSTOCK 58


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Zwangsumlaufsysteme - Schemaskizze

Zwangsumlaussystem

Solarstation

1 Vorlauf
2 Rcklauf
4 Thermometer mit Absperrventil
5 Anschluss Membranausdehnungsgef
7 Fllventil
8 Pumpe
10 Durchflussbegrenzer

16/11/16 2009 UNIVERSITT ROSTOCK 59


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Solarflssigkeit Siedetemperatur von Wasser-Propylenglykol-Gemischen

Wrmetransport vom Kollektor zum Solarspeicher


Wasser wre gut geeignet, da
- hohe Wrmekapazitt
- hohe Wrmeleitfhigkeit
- niedrige Viskositt (Zhigkeit)
- nicht brennbar, ungiftig und preiswert
in Regionen mit Frostgefahr aber Probleme mit
Frost und Verdampfung
Zusatz von Propylenglykol (40 %),
- Frostschutz (bis 23 C) Frostschutz von Wasser-Propylenglykol-Gemischen

- Siedepunkterhhung (>150 C)

Quelle: FHTW Berlin


aber, nachteilig hinsichtlich
- Verschlechterung der Wrmekapazitt
- Verringerung der Wrmeleitfhigkeit
- Erhhung der Korrosivitt
- Erhhung der Viskositt
- Erhhung der Kriechfhigkeit

16/11/16 2009 UNIVERSITT ROSTOCK 60


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Wrmespeicher - Speichertypen

Trinkwasserspeicher
Pufferspeicher
- vor allem in groen Solaranlagen zur Vermeidung thermischer Desinfektion des
Trinkwassers (Legionellen)
- mit Heizungswasser gefllte Stahlspeicher (Druckspeicher)
- oder drucklose Kunststoffspeicher.
Kombispeicher
- gespeicherte Wrme kann entweder direkt ins Heizungssystem eingespeist
(Heizungsuntersttzung) oder ber Wrmetauscher (intern/extern) an
Trinkwasser abgegeben werden
- Tank-in-Tank-Speicher oder Pufferspeicher mit temperaturabhngiger
Schichtenladung (Schichtenspeicher)
Speicher-Kessel-Kombination
- relativ neue Speicherart
- im Speicher mit integriertem Gas- oder lkessel

16/11/16 2009 UNIVERSITT ROSTOCK 61


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Kombispeicher Schichtenspeicher
Wrmespeicher - Speichertypen

Speicher-Kessel-Kombination

Kombispeicher Tank-inTank

16/11/16 2009 UNIVERSITT ROSTOCK 62


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Wrmespeicher - Merkmale

Schlankheit des Warmwasserspeichers


- ausgeprgte Temperaturschichtung als Grund-

Quelle: FHTW Berlin


voraussetzung fr hohes Temperaturniveau
- Temperaturschichtung um so ausgeprgter,
je schlanker und hher der Speicher ist
Hhen-Durchmesser-Verhltnis mindestens 2,5 : 1
mglichst kalte untere Zone ermglicht auch Solarertrag auch bei niedrigem
Temperaturniveau (Wirkungsgrad)
Kaltwassereinlass am Speicherboden (Prallplatte verhindert ungewollte Vermischung)
Warmwasserentnahme erfolgt an der hchsten Stelle des Speichers
Wrmetauscher (Solar- im unteren und Nachheizkreislauf im oberen Speicherbereich)
Dmmung (seitlich und unten 10cm; oben 15cm)
Ziel: Wrmeverlust ber Nacht max. ~5C
Temperaturfhler (Speicherkreis unteres Drittel; Nachheizung oberes Drittel;
Position beeinflusst Regelung, daher ggf. weiter oben bzw. unten angebracht

16/11/16 2009 UNIVERSITT ROSTOCK 63


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Volumenstrom und Frderhhe in Solar- und Heizungsanlagen

Solarpumpe

Anforderungen an Betrieb stark unterschiedlich zum


sonstigen Einsatz von Pumpen in der Haustechnik

Quelle: FHTW Berlin


- Temperaturen von -10C bis +110C
- sehr geringe Volumenstrme (0,1 bis 1m/h)

optional: 24V DC zum Betrieb an PV-Modul

Betriebskonzepte: Zusatzheizung,
Solarstrahlung wenn S<45C
DeG (Gas)
- High-Flow-Prinzip Mischventil
- hufigstes Anlagenkonzept 45C
- verhltnismig viel Solarflssigkeit; 30-80 l/km Kollektor
Speicher
wenn
- schneller Abtransport; geringe Wrmeverluste S=10-90C
S>45C

optimaler Arbeitsbereich (Khlung) Rcklauf


10C
- schonend fr Kollektor (Cracken
Frostschutzmittel) Regelung:
- ber Solarpumpe
- aber hohe Durchflussgeschwindigkeit bei geringer (Drehzahl oder Ein/Aus)
bzw. langsamer Erwrmung - Mischventil(s 45C )
hoher Stromverbrauch (Wirkungsgrad) - Zusatzheizung s( 45C )

16/11/16 2009 UNIVERSITT ROSTOCK 64


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Solarpumpe
Drain-Back-System

- Low-Flow-Prinzip
- verhltnismig wenig Solarflssigkeit; 7-25 l/km

Quelle: paradigma
- langsamere Zirkulation der Solarflssigkeit
hhere nutzbare Temperaturdifferenzen
(thermische Spreizung Kollektor-Speicher)
- schneller Reaktionsgeschwindigkeit der Anlage
- aber Schichtenspeicher erforderlich

- Drain-Back-System
- Reduktion von Minderertragen bei thermischer Stagnation
- wenn Hchsttemperatur erreicht und Wrmespeicher voll verdrngt Solarpumpe die
Flssigkeit
Reduktion knstlicher Alterung ("Cracken")
danach drckt der Solarregler die Luft zurck in das
Drain-Back-Behltnis und normale Zirkulation kann beginnen
- Verwendung von Wasser als Wrmetrger mglich (Vorteile Wrmekapazitt)
- geringer Betriebsdruck
- aber nur spezielle Kollektoren und Betriebsmittel verwendbar
- Wasser bedingt Probleme mit Korrosionsschutz und Undichtigkeiten
- vergleichsweise hohe Stromkosten und Geruschkulisse (Drain-Back-Pumpe)

16/11/16 2009 UNIVERSITT ROSTOCK 65


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Solarpumpe

- Matched-Flow
- passender Duchfluss
- Volumenstrom der Solarflssigkeit wird in Abhngigkeit der Solarstrahlung
dynamisch geregelt
- Verbindung der Vorteile von High- und Low-Flow-Konzept ber
drehzahlgesteuerter Pumpe
hohes Temperaturniveau (Low-Flow)
schnelle Einbringung der Wrme in den Speicher (High-Flow)
- aber aufwndige Planung und hhere Anschaffungskosten notwendig

Schematische Darstellung der Pumpenkennlinie


Regelkonzept (Muscheldiagramm)
- drehzahlstarr vs. drehzahlvariabel

fr drehzahlstarre Pumpen:
- Anlagenkennlinie (Addition Druckverluste)
- Auswahl entsprechender Pumpe
(mglichst hohe Drehzahl Wirkungsgrad)
- Schnittpunkt = Betriebspunkt

16/11/16 2009 UNIVERSITT ROSTOCK 66


2. Direct use of solar radiation energy
2.3 Low-temperature applications

Schichtenspeicher

2.6 Thermische Solaranlage - Speicher


Speicher ohne Schichten

geg: - 300l Speicherkapazitt


- Kaltwassertemperatur 15C

Quelle: FHTW Berlin


ges: a) Wrmegehalt des Wasser im Schichtenspeicher

b) entsprechende Temperatur fr Speicher ohne Schichten

c) Kaltwasserzumischung zur Reduktion der Wassertemperatur


(100l 60C auf 45C)

Wrmemenge: Q m * cW * T

cW spez. Wrmekapazitt von Wasser


1,16 Wh/kg*K
T Temperaturdifferenz Speicher-Kollektor

16/11/16 2009 UNIVERSITT ROSTOCK 67


2. Direct use of solar radiation energy
2.4 High-temperature collectors

y
2.4.1 Aufbau Brennpunkt

F
konzentrierende Kollektoren (parabelfrmig)
f Brennweite
Nutzung der Eigenschaften von Parabeln x
jeder zur Achse parallele Strahl wird auf den Brennpunkt Parabelgleichung:
reflektiert y
x2
4 f
sehr hohe Temperaturen im Brennpunkt
y
eventuell (unter bestimmten Vorraussetzungen) auch D C

Kreissegment als Parabelersatz anzusetzen M

Brennpunkt
x y 2 xR R R bei R/2

y 2 yR x 0 F
R/2
A
x B
y R R x R R 1 x
R
Gleichung:
fr kleine Oberflchensegmente ( x / R 1) gilt die Nherung: R x ( y R)
x x Kreisbgen AB:
1 1
R 2 R x
y Parabel mit Brennpunkt R/2
x 2 R
y R (R ) Parabelsegmente sind vorteilhaft, da leicht
2 R
zu produzieren (Teil einer Rhre)
16/11/16 2009 UNIVERSITT ROSTOCK 68
2. Direct use of solar radiation energy
2.4 High-temperature collectors

Aufbau - Funktionsprinzip

nur direkte Strahlung


diffuses Licht nicht nutzbar

Spiegelachse muss immer auf die Sonne ausgerichtet sein


paralleler Einfall der Strahlung
f DeD

Nachfhrung mit Motor-Getriebe-Einheit R


- horizontale Achse (Nord/Sd-, Ost/West-Richtung) d
D
F
oder polare Achse (parallel zur Erdachse) Absorber
(durchstrmt vom
- in der Regel schrittweise Wrmetrgermedium)

R ...Randwinkel ( Fupunkt, Rand )


D... Apertur (ffnung )
f ...Brennweite
d ... Absorberdurchmesser

16/11/16 2009 UNIVERSITT ROSTOCK 69


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Ausfhrungsarten

Absorber
(reflektierte Strahlung absorbieren und Wrmefluid erhitzen)
a) offene Absorber
(geschwrztes vom Wrmemedium durchstrmtes Rohr)
b) geschlossene Absorber (transparente Umhllung)
c) Hohlraumabsorber (nur kleine Einstrahlffnung)

selektive Absorberbeschichtung und selektive Umhllung anwendbar

a) b) c)

offen geschlossen Hohlraum

16/11/16 2009 UNIVERSITT ROSTOCK 70


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Ausfhrungsarten - Kollektortypen

Solarthermische Kraftwerke zur Stromerzeugung

punktkonzentrierend linienkonzentrierend nichtkonzentrierend

Paraboloid-System Parabolrinnen-System Aufwindkraftwerke

Quelle: Stieglitz; Heinzel Thermische Solarenergie


Solar-Tower-Systeme Fresnel-Systeme Solarpond

16/11/16 2009 UNIVERSITT ROSTOCK 71


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Ausfhrungsarten - Kollektortypen

Solar-Tower-Anlagen
- Kollektor-Heliostat / Spiegelfeld
- die einzelnen Spiegel (Heliostate > 5m) sind Teil einer Parabelschar (Spiegelfeld)
- Konzentration auf Absorber (Reseiver), auf einem Turm Absorber auf Turm

Spiegelfeld
Paraboloid-System
- Paraboloid-Grundform (aufgeklebte kleinen Spiegelfacetten)
- Absorber hat Form einer Kugel ( Kugelabsorber)
- zur Stromerzeugung nutzbar
- Sonderform: Dish-Stirling-Systeme (autarke Anlage)

Parabolrinnen-Systeme
- aufgrund des umlaufenden Absorberrohrs auch als Farmanlagen bezeichnet
- selektiv beschichtetes Rohr mit Glasmantel als Absorber
- verspiegelte Glasoberflche der rinnenfrmigen Reflektoren
- zur Stromerzeugung nutzbar

16/11/16 2009 UNIVERSITT ROSTOCK 72


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Ausfhrungsarten - Kollektortypen

Fresnel-System
- Weiterentwicklung der Parabolrinnen (ebenfalls Linienabsorber)
- mehrere ebenerdig angeordnete parallele Spiegelsteifen
- Streifen werden einachsig nachgefhrt

Quelle: Solarserver
- Wirkungsgrad schlechter, dafr billiger als Parabolrinnen

Auftriebskraftwerk
- kein konzentrierendes HT-System, aber eine der vielen Alternativen
- Verbindung dreier physikalischer Prinzipien:

Quelle: Stieglitz; Heinzel Thermische Solarenergie


- Nutzung der thermischen Auftriebskrfte (Sonnenkamin)
- Treibhauseffekt
- Windantrieb
- druckgestufter Windturbinen wandeln Luftstrmung in el. Energie

16/11/16 2009 UNIVERSITT ROSTOCK 73


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Ausfhrungsarten - Kollektortypen

Solarteich
- flacher Salzsee mit Schichten unterschiedlichem Salzgehalts
- drei deutlich unterschiedliche Zonen
- upper convective zone: konstante Dichte (~Meereswasser)
- non convective zone: linear ansteigende Dichte
- lower convective zone: konstante Dichte (gesttigte Sole)
- eindringende Strahlung wird dichteabhngig absorbiert (bis >100C)
- Wrme wird in bodennahen Schichten gespeichert
- Wrmenutzung und Stromerzeugung mglich
Schemaskizze Solarteich in El Paso

16/11/16 2009 UNIVERSITT ROSTOCK 74


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

2.4.2 Wirkungsweise

Sonnenstrahlen nicht exakt parallel, da dSo D


- endlicher Abstand Sonne Erde
Sonne Erde
- groer Sonnendurchmesser
1AE

2 RSO D Divergenz
tan D D (Winkel der auf die Erde treffenden
AE Sonnenstrahlen)

mit AE 149,6 10 km
6

d So 1,39 106 km

d So 2
D 2 arctan( ) 0,53
1AE

Einfallswinkel der Sonnenstrahle 0,53

16/11/16 2009 UNIVERSITT ROSTOCK 75


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Wirkungsweise

Abbildung der Sonne in der Brennebene (am Beispiel des Paraboloid-Kollektors)


Brennfleck fr einen Strahl unter
D Winkel
=0 kreisfrmiger Brennfleck R ...Radwinkel
0 Ellipse D... Apertur (ffnung ) Flche D 4
aEl
F ...Brennpunkt
D F a El S D
bEl cos f ...Brennweite
D P... Auftrittspunkt
bEl S D

R SAbstand P-F

alle Stahlen zusammen bilden einen Brennfleck


Flche Brennfleck:
S D
2
AEl
4 cos
Folge: - Vergrerung & Verschmierung des Brennflecks, trotz genauer Ausrichtung
- Mitte des Brennflecks heller als der uere Bereich
- Absorber mindestens so gro wie Brennfleck auslegen
16/11/16 2009 UNIVERSITT ROSTOCK 76
2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Konzentrationsverhltnis C

maximale Absorbertemperatur und damit die erzielbare Prozesstemperatur


hngt vom Konzentrationsverhltnis C des Kollektors ab

Flche des empfangenen Lichts ( Apertur ) A


exakte Berechnung: C R
Flche des konzentrierten Lichts ( Brennfleck ) AEl

vereinfachte Berechnung:C Flche des empfangenen Lichts ( Apertur ) AR


Flche des Absorbers AAb

Das Konzentrationsverhltnis wird durch folgende Faktoren begrenzt:


- Divergenz der Sonnenstrahlung
- Konkrete Ausfhrung der Optik (Brennpunkt, Brennlinie,
Brennachse)
- Przision und Qualitt der realen Optik

16/11/16 2009 UNIVERSITT ROSTOCK 77


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Konzentrationsverhltnis C

Berechnung des maximalen Konzentrationsverhltnisses


(Vernachlssigung unvollstndiger + fehlerhafter Reflexion am Spiegel)

geometrisches Konzentrationsverhltnis nach Uhlemann:


dA ( )
dC R S tan(d) S d
AEL ( )

dAR ( ) Ringlnge Ringbreite Strahlung


. DeD
P
dAR ( ) 2 S sin S d
S d
dAR ( ) 2 S sin d
2 S sin()

D
2 2 optische Achse F
AEL ( ) S
4 cos

8 sin cos 4 sin 2 (R )


dC d 46.211 sin 2 R (0 R 90)
D2
D 2

fr R 90 cMax 46.211 (rein theoretisch) real mglich: c 82...200


technisch blich: c 5000...8000

16/11/16 2009 UNIVERSITT ROSTOCK 78


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Konzentrationsverhltnis c

Konzentrationsverhltnisses ist Abhngigkeit


Konzentrationsverhltnis verschiedener Spiegeltypen
des vom Randwinkel als Funktion des Randwinkels
maximal mglich 46.211
rotationssymmetrische Anordnungen besser
geeignet als translationssymmetrische
Geometrien

Quelle: Stieglitz; Heinzel Thermische Solarenergie


reale Konzentrationsverhltnisse:

Paraboloide 100 bis 4000


Solar-Tower 200 bis 1000
Prabolrinne 50 bis 80
Vakuumrhrenkollektoren 1

16/11/16 2009 UNIVERSITT ROSTOCK 79


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Maximale Absorbertemperatur

Bestimmung ber cMax


Annahmen: Sonne, Absorber als schwarzer Krper, keine Verluste, keine
Nutzwrmeabfuhr (Leerlauftemperatur)
maximale theoretische Temperatur Theoretisch erreichbare Empfngertemperatur

Quelle: Stieglitz; Heinzel Thermische Solarenergie


c 1
A S [ ] 4
[K]
cMax

zur Vergrerung der Temperatur


muss das Konzentrationsverhltnis mglichst
hoch gesetzt werden
fr c cMax

A 5.762 K Sonnentemperatur

(hhere Temperaturen nicht mglich zweiter Hauptsatz der Thermodynamik)

16/11/16 2009 UNIVERSITT ROSTOCK 80


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Verluste am HT-Kollektor

unvollstndige Reflexion am Spiegel


(5-24% / nicht zum Absorber reflektieret)

Oberflchenfehler infolge von Fertigungsungenauigkeiten


(Winkelabweichung weiteres verschmieren des Brennflecks / Abweichung von F
fhrt zu Fehler mit 2 F )

Orientierungsfehler, Abweichungen bei der Ausrichtung der Spiegelachse


(Nachfhrsystem / je hher c, desto hher die Wirkung)

Reflexion, langwellige Abstrahlung, Konvektion


(hauptschlich am Absorber / selektive Sichten, usw.)

16/11/16 2009 UNIVERSITT ROSTOCK 81


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Wirkungsgrad

Bilanz DeD, g * AK N R A, R K S
DeD , g
direkte Strahlung
N Nutzleistung
R Reflexion
A, R Reflexion Absorber
K Konvektion Absorber
Wirkungsgrad N S Strahlungsverluste Absorber

DeD , g

uL
Sp A A (v A vU ) (v A4 vU4 ) Stephan-Bolzmann-Konstante
DeD , g c DeD , g c
vU Umgebungstemperatur
vA Absorbertemperatur
0 Konvektion Strahlung Sp Reflexionskoeffizient des Absorbers
A Absorptionskoeffizient des Absorbers
A Transmissionskoeffizient des Absorbers
uL Wrmedurchgangskoeffizient

16/11/16 2009 UNIVERSITT ROSTOCK 82


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Wirkungsgrad

mit steigender Absorbertemperatur fllt der Wirkungsgrad ab, da die Verluste durch
Abstrahlung in der 4. Potenz mit der Absorbertemperatur steigen und die
Konvektionsverluste linear abfallen

fr konstante Absorbertemperaturen steigt der Wirkungsgrad stark mit dem


Konzentrationsgrad an, da die Konvektionsverluste strker abnehmen
(Absorberflche relativ gesehen kleiner) als Strahlungsverluste (hhere
Absorbertemperatur) steigen

Quelle: Stieglitz; Heinzel Thermische Solarenergie


16/11/16 2009 UNIVERSITT ROSTOCK 83
2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Quelle: Stieglitz; Heinzel Thermische Solarenergie

16/11/16 2009 UNIVERSITT ROSTOCK 84


2. Direkte Nutzung der solaren Strahlungsenergie
2.4 Hochtemperatur-Kollektoren

Vergleich: Flachkollektor vs. Hochtemperaturkollektor

uL
uL Sp A A (v A vU ) (v A4 vU4 )
0 (v A vU ) DeD , g c DeD , g c
DeD , g c

16/11/16 2009 UNIVERSITT ROSTOCK 85


2. Direkte Nutzung der solaren Strahlungsenergie
2.5 Hochtemperatur-Anwendungen

2.5.1 Allgemein

Zwischen-kreis
direkte lauf Kraft-masc
Absorber Generator
Strahlung Ko
und Speicher hine
b nz
er e n
Sp tra
ieg tion
el

mit Hilfe der Spiegelsysteme erfolgt Bndelung der direkten Einstrahlung und Umsetzung in
Wrme
Umwandlung in elektrische Energie ber thermodynamische Kreisprozesse (wie bei
konventionellen Dampf- und Gasturbinenkraftwerken)
Auswahl im wesentlichen von der Absorbertemperatur abhngig
- hohe Temperaturen (600C) Gasturbinenprozess (Joule Brayton Prozess)
- wegen Transportverlusten aber auch oft klassischer Dampfprozess (Clausius-Rankine)
- auch Kombination mglich (Gas- und Dampfprozesse)
kraftwerkstechnische Nutzung erfordert Kombination mit Speichersystemen zu Glttung des
solaren Dargebots

16/11/16 2009 UNIVERSITT ROSTOCK 86

You might also like