Professional Documents
Culture Documents
ABSTRACT
Rainfall is one of the key drivers of soil erosion with its force expressed in form of rainfall
erosivity (R-Factor). The R-Factor is a function of rainfall amount and the intensity. Given the
inadequacy of quality data, the factor is generally estimated based on rainfall data with low
time-based resolution. The specific objective of this study was to model rainfall runoff erosivity
(R-Factor) for river Nzoia basin. Local rainfall data were collected from 14 rainfall stations
purposively selected from the basin based on sufficiency and quality. GIS techniques were used
to model rainfall runoff erosivity (R) factor for river Nzoia basin. Thematic map for R-factor
was generated. Results revealed that the average R-Factor value ranged between 339.39 and
855.00 MJ mmha1year1 with the highest values experienced in the middle extending to the
lower basin of the study area. Its mean and standard deviation was 574.38 and 130.62
MJmmha1 year1, respectively. This could be attributed to relief kind of rainfall associated
with Mt Elgon, Cherenganyi hills and the Nandi escarpment.GIS techniques were successfully
used to generate rainfall runoff erosivity (R-Factor) for river Nzoia basin. There is significant
spatial variation in the rainfall erosivity (R-Factor) in River Nzoia basin. If this factor is
considered in isolation, then the middle extending to the lower basin of the study area will be
affected more in terms of the soil erosion due to high rainfall erosivity values. Therefore,
further quantitative studies need to be undertaken to evaluate the principal factors influencing
spatio-temporal variations in the R-factor for river Nzoia basin.
Key words: Spatial variation; Rainfall; R-factor; GIS techniques; Thematic map.
Cite this Article: Akali Ngaywa Moses, Spatial Variation of Rainfall Runoff Erosivity (R)
Factor for River Nzoia Basin, Western Kenya. International Journal of Civil Engineering and
Technology, 8(2), 2017, pp. 418422.
http://www.iaeme.com/IJCIET/issues.asp?JType=IJCIET&VType=8&IType=2
1. INTRODUCTION
The erosive power of precipitation is accounted for by the rainfall erosivity factor (R-factor).As
argued by Mbugua (2009), the factor gives the combined effect of the duration, magnitude and
intensity of each rainfall event. It quantifies the interrelated erosive forces of rainfall and runoff. Its
an annual factor that represents all the erosive rains throughout the year and its based on the rainfall
energy and intensity values. According to Kassam, et al. (1992), Rainfall-Runoff erosivity (R-Factor)
is an aggregate measure of the amounts and intensities of individual rain storms over the year. Rainfall
and runoff play an important role in the process of soil erosion, which is usually expressed as the R-
factor.
As contended by Renard, et al. (1997), this factor is used to quantify the ability of rainfall to cause
soil loss under different conditions. Mbugua (2009) notes that, the rainfall-runoff erosivity factor (R)
for any given period is calculated from an annual summation of rainfall data using rainfall energy (E)
and the maximum 30-minute intensity (I30) as defined in Equation 1. Relative fall velocity of a single
droplet and the overall rainfall intensity determines the erosive properties of rain droplets
(Hrissanthou, et al., 2003).
1 n m
R E j I 30 j .
n i 1 j 1
(1)
Where;
n -Total number of years
m -Total number of rainfall storms in ith year
I30 -Maximum 30-min intensity (mm hr1)
Ej - Total kinetic energy (MJ ha1) of jth storm of ithyear, see Equation 2.
p
E j ek * d k (2)
i 1
Where;
P -Total number of divisions of jth storm of ith year
dk -Rainfall depth of kth division of the storm (mm)
ek -Kinetic energy (MJ ha1 mm1) of kth division of the storm
Renard, et al. (1991) define kinetic energy as shown in Equation 3.
ek 0.29 1 0.72e 0.005 ik (3)
Where,
ik - Intensity of rainfall of kth division of the storm (mm hr1)
2.2. Methods
2.2.1. Rainfall Data
Rainfall data was obtained from Kenya Meteorological Department (KMD). A total of 14 spatially
distributed rainfall gauging stations were considered for the study. Two methods: Thiessen polygon
and Inverse Distance Weighting Method (IDWM) (Equation 4) were used to fill in the missing data for
gauging stations with less than 10% gaps. In the latter, rainfall gauging stations with missing data were
used to fill in the gaps.
n
d i
k
mi
m i 1
n
d k
mi
i 1 (4)
Where,
n - Number of gauges with recorded daily rainfall values on the estimation day
i - Recorded observation at station i
dmi - Distance from gauge i to gauge m and
k - Denoted friction distance whose value ranges from 1.0 to 6.0 (Vieux, 2001)
This was guided by the principle of shared similarities of the stations to each other owed to spatial
immediacy. Figure 1 shows rain gauging stations and Thiessen polygons that were used to fill in
missing rainfall data values.
according to elevation. Monthly rainfall data were converted to raster format and summed to give the
annual rainfall sum for each year. The annual averages and the monthly rainfall averages were then
used as the inputs to Equation 1 by use of the raster calculator tool in Arc GIS 10.1.
If this factor is considered in isolation, then the middle extending to the lower basin of the study
area will be affected more in terms of the soil erosion hazard due to high rainfall erosivity values.
4. CONCLUSION
GIS techniques were successfully used to generate rainfall runoff erosivity (R-Factor) for river Nzoia
basin. There is significant spatial variation in the rainfall erosivity (R-Factor) in River Nzoia basin.
Areas covering the middle towards the lower river Nzoia basin experience maximum erosivity, while
the upper basin areas spanning Mt. Elgon, Cherenganyi and Nandi Escarpment had the minimum
erosivity values. If this factor is considered in isolation, then the middle extending to the lower basin
of the study area will be affected more in terms of the soil erosion due to high rainfall erosivity values.
5. RECOMMENDATION
Further quantitative studies need to be undertaken to evaluate the principal factors influencing spatio-
temporal variations in the R-factor for river Nzoia basin.
REFERENCE
[1] Githui, F.W, Mutua, F. and Bauwens, W. (2010). Estimating the impacts of land-cover change on
runoff using the Soil and Water Assessment Tool (SWAT): Case study of Nzoia catchment,
Kenya.Hydrological SciencesJournaldes Sciences Hydrologiques, 54(5), 899-908.
[2] Hrissanthou, V. M., Mylopoulos, N., Tolikas, D. and Mylopoulos, Y. (2003). Simulation modelling
of runoff ground water flow and sediment transport into Kastoria Lake Greece. Water Resources
Management, 17(3), 223-242.
[3] Kassam, A.H., Velthuizen, H.T, Mitchell, A.J.B, Fischer, G.W., and Shah, M.M. (1992). Agro-
Ecological Land Resources Assessment for Agricultural Development Planning. A Case Study of
Kenya Resources Data Base and Land Productivity Technical Annex 2 Soil Erosion and
Productivity.http://www.fao.org. Accessed on 4th September 2013.
[4] Nyadawa, M.O., Karanja, F., and Njoroge, T. (2010). Application of GIS-Based Spatially
Distributed Hydrologic Model in Integrated Watershed Management: A Case Study of Nzoia
Catchment, Kenya. Journal of Civil Engineering Research and Practice, 7 (1), 61-76.
[5] Renard, K.G., Foster, G.R., Weesies, G.A.,McCool, D.K., Toder, D.C. (1997). Predicting Soil
Erosion by Water: A Guide to Conservation Planning with the Revised Universal Soil Loss
Equation (RUSLE).USDA Agriculture Handbook, Number 703,Government Printing Office,
Washington DC, 404 PP
[6] H.L. Tiwari, Ankit Balvanshi and Deepak Chouhan, Simulation of Rainfall Runoff of Shipra River
Basin. International Journal of Civil Engineering and Technology, 7(6), 2016, pp.364370.
[7] Vieux, B. E. (2001). Distributed Hydrologic Modelling using GIS, Water Science and Technology.
Library, Kluwer Academic Publishers.
[8] World Meteorological Organization (WMO) (2004). Strategy for Flood Management for Lake
Victoria Catchment, Kenya.www.apfm.info. Accessed on 11th December 2014.
[9] Zainab Ali Omran, Design a Hydraulic Structure Using the Rainfall Intensity -Duration-Frequency
Relationship in Iraq, International Journal of Civil Engineering and Technology (IJCIET), 6(3),
2015, pp. 6272