Professional Documents
Culture Documents
Inductive Proximity Sensors being contactless sensors can be used for position sensing, speed
measurement, counting, etc. They can be used in extreme conditions, such as oily, dusty, corrosive
environment. Their application ranges from Automobile Industries to Steel Industries, from CNC/NC
machines to material handling equipments, process automation, conveyor systems, packaging machines.
SPECIFICATIONS:
1 L1 L2 L Sn 1 L1 L2 L Sn 1 2 L1 L2 L3 L Sn 1 2 L1 L2 L3 L Sn
8 45 - 45 1 30 50 20 70 10 8 7 40 - 5 45 2 30 28 35 20 15 70 15
12 55 20 75 2 36 60 20 80 15 12 10 45 20 5 70 4 36 33 35 20 25 80 20
16 55 20 75 5 50 40 20 60 20 18 16 45 20 10 75 8 50 46 40 20 20 80 25
18 55 20 75 5 20 16 50 20 10 80 8
20 50 20 70 5 22 16 50 20 10 80 8
25 50 20 70 8 25 23 50 20 10 80 10
INDUCTIVE PROXIMITY SENSORS
These Sensors are designed to work as solid-state DC These Sensors are designed to provide better alternative
limit switches. The Sensors are connected directly in to conventional limit Switches / micro switches. These are
series with a load and have a bridge rectifier so they are epoxy potted similar to other types of sensors to render
not polarity conscious. The circuit design is such that, IP67 protection and hence are suitable even in underwater
when in off state, it allows very small current to flow applications. The load (Contactor / A.C. relay / Solenoid
through the load. However, a output load (such as relay) Coil) is to be connected in series with the switch.
should be chosen, considering the voltage drop across the
SPECIFICATIONS:
switch in the ON state. These sensors find wide
application in electric control circuits and PLC's. Supply Voltage (nominal) : 20-250 VAC
SPECIFICATIONS: Supply Frequency : 45 - 65 Hz
Load Current : 500 mA max.
Supply Voltage (nominal) :10-60V DC Leakage Current : 2.3 mA typical
Voltage Drop across the Switch : Less than 6.8V Voltage Drop Across the Switch : 6-8V..
Maximum Load Current (Continuous) : 100 mA Maximum Inrush Current : 6A;t <:10ms:f<5
OFF State Current :less than 1 mA Minimum Load Current : 5 mA
Operating Temperature : -25C to +70C Hysterisis : 10% typical
Hysterisis : 15% max. Repeatability : 1% typical
Switching Frequency : 5 Hz typical Temperature Drift : 5% typical
Output Logic : NO or NC Switch ON effect suppression : Provided
Environmental Protection : IP 67 Output Logic : NO or NC or NO+NC*
Status Indication : Through LED Status Indication :Through LED
* In sizes M30 & above.
18 55 20 75 5 18 16 45 20 10 75 8 12 55 20 75 2 12 10 45 20 5 70 4
25 50 20 70 8 25 23 50 20 10 80 10 18 55 20 75 5 18 16 45 20 10 75 8
30 50 20 70 10 30 28 35 20 15 70 15 25 50 20 70 8 25 23 50 20 10 80 10
36 60 20 80 15 36 33 35 20 25 80 20 30 50 20 70 10 30 28 35 20 15 70 15
50 40 20 60 20 50 46 40 20 20 80 25 36 60 20 80 15 36 33 35 20 25 80 20
50 40 20 60 20 50 46 40 20 20 80 25
INDUCTIVE PROXIMITY SENSORS
These are DC type Proximity These are available only These are called as slot These are T type switches
Sensors and the technical in DC type and the sensors or fork sensors and and are provided with oil
specifications are similar to specifications of these are available in DC (3 wire ring. These are available in
that of standard DC type Sensors match with our version). AC (2 wire version) DC (3 wire) & AC (2 wire)
Inductive Proximity Sensors. standard DC type and DC (2 wire version); versions with sensing
These find application in Inductive Proximity Sensors with different sensing distance as high as 4mm.
CNC/NC machines or where Sensors. There are two gap also can be manufactured The sensors are housed in
space is the constraint. models available - Flush on request. moulded ABS plastic
These are available in ABS and Non Flush mounting, enclosures.
plastic enclosures. housed in moulded ABS
Plastic enclosures.
CONNECTION DIAGRAMS
2 WIRE DC MODEL
3 WIRE DC MODEL
NAMUR
PHOTOELECTRIC PROXIMITY
SENSORS
THROUGH BEAM WITH CONTROLLER
SPECIFICATIONS :
THROUGH BEAM WITH BUILT-IN AMPLIFIER
Housing : Chrome plated Brass
DIFFUSE BEAM
Housing with 2 lock nuts
Dimensions : M30 X 1.5X70 mm length RETRO - REFLECTIVE
Supply Voltage : 10-30V DC CAPACITIVE PROXIMITY
Output Transistor : PNP or NPN
SENSORS
Output logic : NO or NC
Reverse Polarity
Protection : Provided
Status Indication : Thro' LED
Range Adjustment : Thro' Potentiometer