Professional Documents
Culture Documents
Revised 2014/01/15
Copan Software - End User License Agreement
Please carefully read the following legal agreement ("AGREEMENT") for the
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT CLICK THE BUTTON THAT
INDICATES THAT YOU ACCEPT THE TERMS OF THIS AGREEMENT AND DO NOT USE THE
SOFTWARE.
right to use one copy of the specified version of the Software and the
until earlier terminated as set forth herein. This Agreement will terminate
Agreement, you must destroy all copies of the Software and the Documentation.
You may terminate this Agreement at any point by destroying all copies of
international treaty provisions. UNDERHILL GEOMATICS LTD. owns and retains all
right, title and interest in and to the Software, including all copyrights,
patents, trade secret rights, trademarks and other intellectual property rights
transfer to you any title to the intellectual property in the Software, and
you will not acquire any rights to the Software except as expressly set forth
in this Agreement.
4. Restrictions. You may not rent, lease, loan, sublicense or resell the
Software. You may not permit third parties to benefit from the use or
arrangement. You may not transfer any of the rights granted to you under
prohibited by applicable law. You may not modify, or create derivative works
based upon the Software in whole or in part. All rights not expressly set
5. Warranty and Disclaimer. Except for the limited warranty set forth herein,
THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE.
WITHOUT LIMITING THE FOREGOING PROVISIONS, UNDERHILL GEOMATICS LTD.
ITS SUPPLIERS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY DIRECT OR INDIRECT,
MALFUNCTION, OR FOR ANY AND ALL OTHER DAMAGES OR LOSSES. IN NO EVENT WILL
by applicable law.
Canada.
Portions of this software are copyright 2010-2012 The FreeType Project (www.freetype.org). All
rights reserved.
Note 1 Coordinate files created by Copan Pro for Android may be used by Copan for Windows
software which is available on Underhill Geomatics Ltd.s website. Copan Lite is available for free.
Likewise, Copan Lite coordinate files may be read and modified by Copan Pro.
Revisions
1. Choice of input type (keyboard) for Cogo Azimuth and Distance fields added. See the Settings
function.
Version 1.20
The above images show the Copan main menu. The COORDS and CALC options brings up submenus
which prove more functions.
Summary of functions:
COORDS: New file, Open file, Edit, Close, Import, Export, Transform by Parameters, Transform by
Points, Reindex
GPS
Map View
Settings
Coordinates Menu
Copan stores points in coordinate files. Each point is identified by an unique number. Each point file is
indexed on the point number to allow for quick retrieval.
Coordinate File Use
Copan Pro - To perform Copan functions which uses points, a coordinate file must be opened. Use the
Open file function to open an existing file or New file function to create a new coordinate file.
Copan - A coordinate file is automatically opened when Copan is started. This coordinate file is limited
to 50 points.
Copan, when run, will create a subdirectory called Copan. Your data directories and files should be
placed in this subdirectory.
Copan Pro - Pressing the New file menu button will bring up this screen.
Copan Only one coordinate file, automatically created by Copan, is allowed. This file is limited to 50
stored points.
The recommended procedure for using Dropbox and coordinate files is to create the coordinate file first
on the Android devices storage and then upload to Dropbox. You may open an existing Dropbox
coordinate file.
Copan handles coordinate file Dropbox operations by downloading a coordinate file from Dropbox and
storing it locally, working with the local file, and then uploading it back to Dropbox when finished with
the coordinate file. This is different from other data file operations in that there are no local copies of
other data files downloaded from Dropbox. In those cases, the data only exists in memory. This is the
same as for data files storage locally on your Android device.
To use Dropbox from Copan, you must have a Dropbox account and are connected to the Internet.
Select the Dropbox Sign In function from the Copan main menu and follow the directions. After you
have successfully signed in to Dropbox, the Dropbox directory will be available from the file chooser
screens.
You may navigate to subdirectories by tapping a subdirectory entry. When you have reached the
subdirectory in which you want to create a new subdirectory or file, tap the NEW button at the
bottom of the screen.
Next, select whether you want to create a new file or subdirectory.
In this example, we create a new subdirectory ABC in which we will create a new coordinate file.
Press OK to create the new subdirectory.
Next, tap on the entry ABC to get into that subdirectory. Then tap on the NEW button to create a
new coordinate file.
Select the File option and enter the name of a new coordinate file. In this case, we will create a new
coordinate file ABC.
Copan Pro - A coordinate file must be opened in order for it to be edited. If you had just created a new
coordinate file, it will be opened unless you have closed it.
Copan The default coordinate file is always open so it is not necessary to manually do this.
If there are points stored in the coordinate file, the first point will be displayed in the Coordinate Edit
screen.
Point Navigation
You may navigate to a point by using the Go button or by using gestures:
Next Point: short swipe to the left Previous Point: short swipe to the right
First Point: long swipe to the right Last Point: long swipe to the left
Coordinate File Edit Functions
GET will retrieve a point from the coordinate file. Enter a point number in the Pt# field and press the
GET button.
DEL will delete the displayed point from the coordinate file.
GO will display a submenu which allows the user to quickly retrieve the first, last, previous, or next point
in the coordinate file.
Coordinate files produced by Copan Pro are interchangeable with coordinate files produced by Copan
for Windows, another Underhill Geomatics Ltd. software package (available at www.underhill.ca). An
Android coordinate file may be copied to a Windows computer and may be used by Copan for Windows.
Likewise, a Windows Copan coordinate file may be copied to an Android computer and used by Copan
Pro. Only coordinate file are interchangeable between Android and Windows Copan software.
Coordinate File Transformation Functions
Points in a coordinate file may be transformed by rotating, scaling, and translating in that order.
Copan will perform the specified transformation on a range of points and save the transformed points to
a new range of points. The original points are not modified. There is also an option to perform the
inverse of the specified transformation.
The transformation parameters may be saved to a file for future use. Press the FILE button to access
the submenu which will allow you to save the displayed parameters or to retrieve saved parameters
from file.
In addition to transforming points by specified parameters of rotation, scale, and translation, Copan can
also compute the transformation parameters using pairs of points from the source and target systems.
The Transform by points function will compute the transformation parameters of similar points and
allow you to save the computed parameters to a file for use in the Transform by parameters function.
Press the OK button to compute and display the parameters. The calculated parameters may then be
saved to a file.
Export Coordinate File (Copan Pro Only)
Points in a coordinate file may be exported to a text file. The point data is in comma-delimited format
with one point on each line. You may choose the point fields to be exported and the order in which the
fields are printed. Points are exported from the coordinate file that is currently open.
The buttons with the field names indicate the fields that will be exported and the order that they will be
exported. You may change the fields that are exported and the order by pressing the buttons.
Here is an example of a configuration for point export:
In this case, only the point number, northing, easting, and elevation of each point will be exported.
Import Coordinate File (Copan Pro Only)
Points in a text file may be imported into a Copan Pro coordinate file. The point data must be in
comma-delimited format with one point on each line. Points are imported and added to the coordinate
file that is currently open.
Press the buttons to configure the input screen to match the fields in your text input file.
The following screen shows the Import function configured to import points with number, northing,
easting fields defined:
Reindex
Points in a Copan coordinate file are indexed on their point numbers. This enables Copan to retrieve
points from the coordinate file quickly, even as the number of points is large. The point number index is
stored in a separate file and on rare occasions, may become corrupted. If that happens, access to the
coordinate file points becomes unreliable. The Reindex function rebuilds the point number index file.
Calculation Functions
CoGo - perform inverse, traverse, and intersection calculations. Resulting points may be saved to the
coordinate file.
Map Check Bearing / distance data for a closed figure may be checked for closure. The area for the
figure is also computed.
Traverse Field traverse observations may be calculated. Closure errors are computed and the traverse
may be balanced.
Map/Geographic transformations between UTM or State Plane and Geographic coordinates are
calculated.
CoGo
The Cogo function may access the coordinate file to retrieve or save points so please open a coordinate
file before proceeding.
Select Solution button is used in intersection calculations where there are two possible solutions to pick
the appropriate point.
Clr View button removes the temporary Cogo working lines from the display.
Save Pt. will place the calculated coordinates in the Coordinate File Save Point screen.
Calculate is used to perform the calculation when you have filled the appropriate input fields.
Copan CoGo uses a two line screen to accept user input and display results. Enter the known quantities
and Copan will calculate the unknown parameters if possible.
For example to calculate the inverse from Pt. 1 to Pt. 2 (points stored in an opened coordinate file),
enter the point numbers while leaving the Azimuth and Distance fields blank.
All menu button will display the graphic view zoomed to its extents.
Zoom use two fingers (thumb and finger) to zoom in by pinching and doing the opposite to zoom out.
How to Use the Two Line Cogo Input Screen
The two line input screen may be used to perform inverses, traverses, and various intersection
calculations. The logic behind the two line input system is that any fields left blank will be calculated if
enough data fields are filled.
x x x x Traverse
x x Inverse
x x x Azimuth/Azimuth Intersection
x x
x x x Azimuth/Distance Intersection
x x
x x x Distance/Azimuth Intersection
x x
x x x Distance/Distance Intersection
x x
Cogo Azimuth and Distance Input Options
Points stored in the coordinate may be used to define an azimuth or distance by simply specifying the
point numbers in the Azimuth or Distance input fields. Two points are required to define an azimuth or
distance.
For example, to enter an azimuth or distance between points 1 and 2, enter: 1,2 or 1?2.
1?2
or
1,2
Distance Arithmetic
Arithmetic operations: add (+), subtract (-), multiply (x or *), divide (*)
For example:
1?2
or
1,2
Adding Multiples of 90 Degrees
You may also modify the azimuth between 2 stored points by adding a multiple of 90 degrees using .1,
.2, or .3. For example:
3,4.1 = 10 + 90 = 100
Azimuth Arithmetic
For example:
Circular curves may be calculated for a variety of conditions. You may define intersection points or
curve points in conjunction with other curve parameters and Copan will calculate the unknown
parameters. The Copan input screen is set-up to let you enter the known data and the unknown data
will be calculated if possible.
PI Intersection Point
BC Beginning of Curve
EC End of Curve
PC Point on Curve
Fill in the fields with known data and Copan will calculate the curve if enough information was entered.
Here is an example:
In this example, the curve to be calculated is defined by three points from the coordinate file which are
intersection points for a curve alignment and the curve is to have a radius value of 40.
The results of the curve calculation:
The calculated points may be saved to the coordinate file by placing the cursor in one of the point fields
(Pt#, N, or E) and then pressing the Save Pt button.
Copan Pro Only Curve data and results may be saved to a file. An additional menu choice, Print to file,
is available.
The results shown graphically:
Map Check
The Map Check function will calculate the closure of a closed lot given the azimuth / distance data of
each side. Circular curves are supported. The area of the lot is also calculated.
In addition to the menu items shown at the bottom of the Map Check screen, pressing the computers
Menu button will display an additional menu button, Start Pt. This function will let you specify the
start coordinates for the map check traverse. Otherwise, the start coordinates will default to N10000,
E10000.
Selecting the Insert menu function will open a new input screen for the Map Check data. This screen
is used to input each line of your map traverse.
The first line of the Map Check data should be just the start point number with no Azimuth or Distance
data.
This shows the first line of the Map Check data.
The Insert function will insert a line of data before the cursor position in the Map Check data display
screen (shown above). Use your finger and touch the screen to position the cursor. The cursor is also
used to indicate the line to Edit or Delete.
Each point in the Map Check data is classified as:
Corner
BC Beginning of Curve
EC End of Curve
POC Point On Compound curve. This is an End of Curve which is also a Beginning of Curve. (You may
need to scroll the list to see this selection as is the case in the illustration below.)
This is an example of a typical Map Check traverse line:
This is an example of a complete Map Check data set:
The Map Check data may be saved to a file for later use.
Calculating the above data yields the following results:
Copan Pro Only Map Check data and results may be saved to a file. An additional menu choice, Print
to file, is available.
Pressing the Show menu button will display the graphics view of the calculated data:
All menu button will display the graphic view zoomed to its extents.
Zoom use two fingers (thumb and finger) to zoom in by pinching and doing the opposite to zoom out.
Traverse
The Traverse function is used to calculate a field traverse consisting of measured legs comprising
horizontal and vertical angles and slope distances measured by a survey instrument.
Setup input and edit traverse setup data including survey information and instrument parameters
Save Pts save the calculated points to the opened coordinate file
HI height of instrument
The Another button allows multiple sideshots to be entered without going back to the previous
screen.
Closing Angle
If you wish to include a closing angle in your closed traverse, add an At point after your traverse to
your last point. Then, add a To point to your initial reference point or azimuth. Leave the Distance
blank and this line will be interpreted as an angle only.
Traverse points are entered or edited by positioning the cursor at the line the traverse data display
screen and then pressing the Insert At Pt, Insert To Pt, Edit, or Del button.
Calculating the Traverse
Press the Calc button to calculate the traverse. The calculated point coordinates, misclosure, and
relative precision are displayed.
Pressing the Show button in the Traverse Results screen will display a graphical view of the traverse.
The graphic view may been scrolled by dragging the image with your finger and zoomed in and out by
using your thumb and index finger. You may also use the + and - buttons to zoom in and out.
Copan Pro Only Traverse data and results may be saved to a file. An additional menu choice, Print to
file, is available.
Balancing the Traverse
Errors in the closure of your traverse may be distributed amongst the survey legs by balancing. Copan
offers three methods of balancing:
Compass
Crandall or
Transit
After balancing the traverse, the points are recalculated and the results are displayed.
Copan Pro Only Traverse data and results may be saved to a file. An additional menu choice, Print to
file, is available.
Save Traverse Points
Points are saved to the coordinate file with the option to overwrite or not to overwrite existing points
with the same point number as the traverse points.
The number of points actually saved to the coordinate file is displayed.
Map Plane / Geographic Converter
The Map Plane / Geographic Converter may be used to convert from UTM or State Plane coordinates to
Geographic (Latitude / Longitude) or from Geographic to UTM or State Plane coordinates.
Geographic to UTM
Press the button to the right of the Latitude text input field to toggle between N and S.
Press the button to the right of the Longitude text input field to toggle between E and W.
Set the Zone text input field to blank if you wish the calculate UTM coordinates in the standard zone.
You may fill in the field if you wish to have UTM coordinates calculated for a specific zone.
UTM to Geographic
Press the button to the left of the UTM Northing text input field to toggle between N and S.
Latitude and longitude may be entered as degrees in decimal format or in degrees minutes seconds
format.
Fill in either UTM or Geographic values, select To Map or To Geographic , and press the Convert
button to perform the conversion. UTM coordinates may be saved to the opened Copan coordinate file.
Geographic to State Plane
Use the Settings function from the main menu to change the State Plane parameters.
Use the Settings function from the main menu to change the State Plane parameters.
GPS Function
The GPS function displays location as latitude/longitude and UTM or State Plane coordinates. The
mapping coordinates are converted from the latitude and longitude.
Use the Settings function to set the mapping coordinate system (UTM or State Plane), ellipsoid/datum,
zone, and units.
The point displayed may be saved to the opened Copan coordinate file as mapping coordinates.
Map View Function
The Map View function accesses the online MapQuest application and uses Open Street Maps data.
Internet access is required. GPS is also used to set the initial map view.
Cross Hairs On / Off - toggle the Cross Hairs on or off. The Cross Hairs may be used to digitize points.
Follow Me On / Off toggle on or off the option for the map to centre on the devices GPS location.
Save Point save the digitized point to the Copan coordinate file. Once the point is digitized, the
Geographic / Mapping Convertor is called to calculate a plane coordinate which may be saved.
If you have Internet access and have a Dropbox account, Copan can use Dropbox to store Copan files. In
your Dropbox directory you will have a /Dropbox/Apps/Copan directory. You make use this Dropbox
directory from within Copan to save coordinate and data files.
Most Copan file operations that are performed on your local storage may be performed on the Dropbox
directory. The exceptions are Copan coordinate file operations which must be handled a little
differently.
In general, Copan data are created in memory and then saved to a file. Changes made to data in Copan
are not saved to file unless the user chooses to. Copan coordinate files do not follow this model and
thus, must be handled differently with respect to Dropbox.
A Copan coordinate file is updated every time a change is made to a saved point. Additionally, the point
number index file is updated frequently. This mode of operation is not compatible with the Dropbox file
upload and download functions as it would slow down Copan and consume Internet bandwidth.
The recommended procedure for using Dropbox and coordinate files is to create the coordinate file first
on the Android devices storage and then upload to Dropbox. You may open an existing Dropbox
coordinate file.
Copan handles coordinate file Dropbox operations by downloading a coordinate file from Dropbox and
storing it locally, working with the local file, and then uploading it back to Dropbox when finished with
the coordinate file. This is different from other data file operations in that there are no local copies of
other data files downloaded from Dropbox. In those cases, the data only exists in memory. This is the
same as for data files storage locally on your Android device.
To use Dropbox from Copan, you must have a Dropbox account and are connected to the Internet.
Select the Dropbox Sign In function from the Copan main menu and follow the directions. After you
have successfully signed in to Dropbox, the Dropbox directory will be available from the file chooser
screens.
Settings
Angle mode
Copan may be configured to interpret azimuths and angles either in degrees (in degrees minutes
seconds format) or grads (gons). Use the settings function to set this option.
Degrees Enter angles in ddd.mmss format. For example, enter 349 degrees, 45 minutes, 10 seconds as
349.4510. You may also enter bearings in the quadrantal format. For example, N30.5332E.
Units
Units determine how coordinates are interpreted when converting from geographic (latitude, longitude)
or to geographic. The units available are: metres, feet, and US survey feet.
Coordinate system
You may choose between UTM or State Plane coordinate systems.
Ellipsoid/Datum
In the UTM system, the following ellipsoids are available:
WGS72
WGS84
GRS80
CLARKE 1866
CLARKE 1880
ATS77
NWL 9D
INTERNATIONAL
BESSEL
KRASSOVSKY
EVEREST
AUSTRALIAN N.
AVG.TERRESTRIAL
In the State Plane coordinate system, you may choose between t hese datums:
NAD27
NAD83
Zone
If you have selected the UTM coordinate system, you may enter a zone or leave it blank. If left blank,
then the conversion from geographic to mapping will automatically calculate the zone.
If you have selected the State Plane coordinate system, you must select a zone.
This setting allows you to choose the keyboard which suits you the best. The options are:
numberDecimal
phone
text