You are on page 1of 7

Setting up sketchup vray exterior sketchupblog

Sketch Up , V Ray

Basically how SketchUp exterior vray setting sketchupblog more complex than
the interior. This is due to many factors existing choice of light sources. So each setting
certainly different. Example :

1. Using the sky as the sun light source


2. Using the HDRI as the light source
3. Using DOM light as a light source
4. Using DOM combination with the HDRI light as a light source
5. Etc.

Why are there etc?


Because of the way setting sketchup vray exterior sketchupblog has a lot of
variety of lighting techniques. Even HDRI itself can be used as the primary light source
or merely as a Background only. But the tutorial setting sketchup vray exterior of
sketchupblog will discuss the basis of exterior rendering. From this basic setting is still
very possible to be further developed according to the needs and in accordance with
the desired result.

SketchUp exterior vray tutorial setting this time will be using vray sun (sky) as the
primary light source. Because using vray sun, then we will not get a Background
image. So we just get a bright sky background that gives a chance to show the end
result is light blue. And if we want to get the background image then we must use
Photoshop as an aid.

And to get the SketchUp file of the tutorial vray exterior SketchUp is what you get
on the "3d model". Which is distributed free of charge as an ingredient or a means for
studying setting sketchup vray exterior. Or can be found on the link below.

File 3d vray sketchup tutorial exterior:


The 3D file also has the settings sketchup vray material for each material used. So we
can get two things, namely:

1. Setting sketchup vray exterior


2. Setting vray material

Below are examples of vray exterior render SketchUp. Also shown before and after
rendering.

vray exterior render example sketcup

From the above results generated rendering of the setting below.


1. System: the menu system is changed only vray sketchup Dynamic Memory
Limit. Customize with your device / PC you have.

2. Camera: in the camera vray sketchup, units that are here should not be used as a
benchmark if the position is different shadow. The revamped, al:
Shutter speed: 500
F number: 8
Film Speed: 75
3. Environment: For sketchup vray environment on the menu is using the default
settings
4. GI (skylight): using the standard setting TeksSky
5. Environment: using the standard setting TeksSky

6. Image Sampler (Antialiasing)

Min. subdivs: 2
Max.subdivs: 5
Size: 1.5
Antialiasing Filter: Area
7. DMC Sampler
Adaptive amount: 0.85
Noise threshold: 0,005
Min.samples: 8
Global subdivs mult. : 1.0
8. Output: is the file size so rendering. Before starting the rendering should note the
output of your file. There must be no unnecessary accident that could slow down your
rendering. And as much as possible produce output that is not excessive.
9. Indirect Illumination: Make sure you check on this menu Ambient Occlusion. Want to
know how to set ambient occlusion and function of this AO?

can be read at: how to set ambient occlusion


AO: on
Amount: 0.8
Subdivs: 32
Radius: 32
10. Irradiance Map: Setting standards
11. Irradiance Map: setting standards
12. Light cache: is one of the parameters that can be used to reduce noise vray
sketchup.

see also: how to reduce the noise vray sketchup

Subdivs: 1500
Sample size: 0.01
Setting up sketchup vray exterior sketchupblog above is just a simple setting that
I personally can produce results sufficient output for presentation. And of the above
settings can still be developed further. For example, by adding HDRI as BG, or use a
combination of DOM HDRI light as a light source. And of course there are many more
that can still be developed.
To download the file above, silahakan you enter the 3D Model menu. And download
directly from the link provided. Hope you can help.

Send regards for success!!!

You might also like