Professional Documents
Culture Documents
Pumps
E X C L U S I V E LY F R O M E N E R PA C
Lightweight and compact design
Durable glass-filled nylon reservoir and nylon encapsulated
aluminum pump base for maximum corrosion resistance
Two-speed operation on most models reduces handle
strokes by as much as 78% over single speed pumps
PORTABLE HYDRAULICS
160
Enerpac_p160-161 final.qxd 4/5/10 12:21 PM Page 161
Pumps
P
SERIES
Reservoir Capacity:
20-155 in3
Flow at Rated Pressure:
.055-.15 in3/stroke
Maximum Operating Pressure:
10,000 psi
PORTABLE HYDRAULICS
PISTON
STROKE DIMENSIONS (IN) WEIGHT MODEL
(IN) A B C D E G H J L M N P Q S (LBS) NUMBER
.50 7.31 13.25 1.13 3.37 1.13 1/4-18 NPTF 12.56 .75 5.63 3.75 3.18 .28 5.3 P-141
1.00 13.56 21.00 1.44 3.93 1.31 3/8-18 NPTF 20.56 1.19 7.00 .63 4.75 9.0 P-391
.50 7.31 13.25 1.13 3.37 1.13 1/4-18 NPTF 12.56 .75 5.63 3.75 3.18 .28 5.3 P-142**
.50 13.56 20.06 1.44 3.37 1.13 1/4-18 NPTF 15.75 .75 5.69 .63 3.75 7.5 P-202
1.00 13.56 21.00 1.44 3.93 1.31 3/8-18 NPTF 20.56 1.19 7.00 .63 4.75 9.0 P-392**
1.00 13.30 21.75 1.78 5.25 1.39 3/8-18 NPTF 20.75 2.19 9.00 7.12 4.75 1.40 .41 18.0 P-802
1.00 13.30 21.75 1.78 5.25 .81 3/8-18 NPTF 20.75 2.19 9.00 7.12 4.75 1.44 .41 22.0 P-842
** Available as set.
161
Enerpac_p162-163 final.qxd 4/5/10 12:23 PM Page 162
Pumps
Shown from left to right: P-462, P-84, P-801, P-77, P-80, P-39
* Contact Enerpac for applications where operating pressure is less than 10% of pressure rating.
** Available as set. *** For use with double-acting cylinders.
162
Enerpac_p162-163 final.qxd 4/5/10 12:23 PM Page 163
Pumps
P
SERIES
Reservoir Capacity:
40-453 in3
Flow at Rated Pressure:
.15-.29 in3/stroke
Maximum Operating Pressure:
10,000 psi
PORTABLE HYDRAULICS
PISTON
STROKE DIMENSIONS (IN) WEIGHT MODEL
(IN) A B C D E F H J L M N P Q R S T (LBS.) NUMBER
.81 15.5 20.47 1.28 1.50 1.25 18.25 1.18 4.69 2.56 5.25 13 P-39
1.00 16.46 20.67 1.30 1.57 2.04 22.04 1.34 4.57 1.97 4.72 15 P-77
1.00 16.75 21.22 1.00 1.75 2.13 20.75 1.14 6.88 .75 5.75 4.76 .83 .31 24 P-80**
1.00 25.94 30.78 1.00 1.75 2.13 30.43 1.14 6.88 5.75 4.76 .83 .31 31 P-801
1.00 16.75 21.22 1.00 1.75 2.52 20.75 1.14 6.88 .75 5.75 4.76 1.50 1.69 .31 2.64 29 P-84***
1.50 8.25 12.13 6.42 12.63 7.68 26.44 .98 10.63 6.89 25.6 3.63 3.13 61 P-462
1.50 8.35 12.13 6.42 12.63 7.68 26.44 .98 10.63 6.89 25.6 3.63 3.50 2.68 3.13 61 P-464***
** Available as set.
*** For use with double-acting cylinders.
163
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 164
Pumps
Flow Chart
Shown: PAM-1041
164
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 165
Pumps
RFL-102
Regulator-Filter-
Lubricator
Recommended for
use with all air
pumps. Provides clean, lubricated
air and allows for air pressure
adjustment. Steel bowl guards are
standard.
Shown left to right: PAMG-1402N, PATG-1102N, PARG-1102N, PATG-1105N
S E T T I N G N E W S TA N D A R D S
High efficiency cast aluminum air motor for increased life and reduced air Large Reservoir
consumption Models
Fully serviceable air motor assembly The Turbo II Air
Pump is also
PORTABLE HYDRAULICS
Reinforced heavy-duty reservoir for applications in tough environments
available with a
New generation air saver piston with rugged one-piece design reduces air
larger reservoir: PATG-1105N,
consumption and operating costs
PAMG-1405N, and PARG-1105N.
Return-to-tank port for use in remote valve applications
Quiet only 76 dBA with low air consumption of 12 scfm
Operating air pressure: 25-125 psi, enables pump to start at extremely low
pressure
Internal pressure relief valve provides overload protection
USABLE
USED OIL
WITH CAPACITY MODEL
CYLINDER (IN 3 ) NUMBER
127 PATG-1102N*
165
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 166
Pumps
AIR
PRESSURE OUTPUT FLOW PRESSURE AIR SOUND
RATING RATE (IN 3 /MIN) MODEL VALVE RANGE CONSUMPTION LEVEL
(PSI) NO LOAD LOAD NUMBER FUNCTION (PSI) (SCFM) (DBA)
10,000 60 10 PATG & PAMG Advance/ 25-125 12 76
51 1)
61) Hold/
10,000 25-125 12 76
PARG Retract
10,000 482) 52) 25-125 8 76
1) Air supply connected at pendant.
2) Air supply connected at pump shown on flow curve.
PORTABLE HYDRAULICS
* Available as set.
166
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 167
Pumps
ATEX Certified
See explanation of ATEX
certification in the Yellow Pages.
Speed Chart
To determine how a ZA Series
pump will operate your cylinder,
see the Pump/Cylinder Speed Chart
in the Yellow Pages.
Hoses
Enerpac offers a
complete line of high-
quality hydraulic
hoses. To ensure the
Shown: ZA4208MX, ZA4420MX
integrity of your
system, specify only genuine
Features Z-Class high efficiency pump design, higher oil flow and bypass
Enerpac hydraulic hoses.
pressure
Two-speed operation and high by-pass pressure reduces cycle time for
improved productivity
PORTABLE HYDRAULICS
Internal relief valves. One is factory set for overload protection while the
second is user adjustable for pre-setting maximum system pressure ZA4 PERFORMANCE
Sight gauge on 1 and 2 gallon and level gauge on 2.5, 5 and 10 gallon DYNAMIC
AIR PRESSURE AIR SOUND
reservoirs allow quick and easy oil level monitoring RANGE CONSUMPTION LEVEL
Optional heat exchanger warms exhaust air to prevent (PSI) (SCFM) (DBA)
freezing and cools the oil 60-100 20-100 85-90
USABLE
USED OIL VALVE OUTPUT FLOW RATE 1)
WITH CAPACITY MODEL VALVE MODEL (IN 3 /MIN)
CYLINDER (GAL) NUMBER 2) FUNCTION NUMBER 100 PSI 700 PSI 5,000 PSI 10,000 PSI
167
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 168
Pumps
Z A 4 2 08 M X - F H K
1 2 3 4 5 6 7 8 8 8 8
Product Motor Flow Valve Usable Valve Voltage Options Options Options Options
Type Type group Type oil Operation
capacity
ZA4
1 Product Type 5 Usable Oil Capacity 8 Options SERIES
Z = Pump class 04 = 1.0 gallon (Specify in alphabetical order)
F = Filter Reservoir Capacity:
2 Motor Type 08 = 2.0 gallon
G = 0-15,000 psi gauge 1.0-10.0 gal.
A = Air motor 10 = 2.5 gallon (2-1/2")
H = Heat exchanger
Flow at Rated Pressure:
20 = 5.0 gallon
3 Flow Group K = Skidbar (1 and 2 80 in3/min.
40 = 10.0 gallon
4 = 80 in3/min@10,000 psi gallon reservoirs only) Maximum Operating
6 Valve Operation N = No reservoir handles Pressure:
4 Valve Type M = Manual valve (includes lifting eyes;
2.5, 5, 10 gallon only) 10,000 psi
0 = No valve with coverplate N = No valve R = Roll bars
2 = 3-way, 2-position (VM32)
3 = 3-way, 3-position (VM33) 7 Voltage
4 = 4-way, 3-position (VM43) X = Not applicable
6 = 3-way, 3-position, locking Ordering Example
(VM33L) Model Number: ZA4208MX-FHK
8 = 4-way, 3-position, locking ZA4208MX-FHK is an air operated pump with a
3-way, 2-position manual valve, a 2.0 gallon
(VM43L)
reservoir, filter, heat exchanger and skid bar.
PORTABLE HYDRAULICS
168
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 169
Pumps
Manual Valve
Ideal choice for most applications
Manual valve control, for single-acting or
double-acting applications
Motor control on shroud
PORTABLE HYDRAULICS
Low-voltage pendant provides additional safety for the operator Ideal for punching, crimping and cutting
(remote control units) For use when load-holding is not required
LCD readout provides a number of diagnostic and readout Low-voltage control pendant with 10-ft.
capabilities never before offered on a portable electric pump cord controls valve and motor
(included with electric valves, optional with manual valves)
Solenoid Valve
Ideal for lifting applications and where
remote control is required
Motor runs continuously on pumps with
VE33 and VE43 valves. With VE32 valve,
motor only runs during the advance
function, while holding and retracting, the
motor is off
Designed to be tough, the Low-voltage control pendant with 10 ft.
ZU4-Series with steel cord for remote motor and valve operation
reservoirs will take the
abuse of todays
construction sites.The
ZU4908JE is the ideal
pump for post tensioning
applications.
169
Enerpac_p164-170 final.qxd 4/5/10 12:25 PM Page 170
Pumps
1) All models meet CE safety requirements. E voltage versions also meet all requirements of the European EMC-Directive.
2) See valves section for technical information on valve types.
3) See custom order matrix for other voltage options.
4) Subtract 3 lbs. for STD Electric models.
170