Professional Documents
Culture Documents
Description
Roff Tile Bonder is economical on-site mix additive to be mixed with cement, for fixing of tiles. Roff Tile Bonder
exhibits very high water retention and thus reduces the absorption of water in to porous substrates. It provides
workability, sufficient sag resistance as well as appropriate setting time. The adjustability is good even at low
dosages and high ambient temperatures. It makes cement self-cured.
Areas of Application
Roff Tile Bonder (RTB) & cement slurry is used for fixing tiles on conventional machan / Levelling bed
application. For fixing tiles on wall, Roff Tile Bonder is to be mixed with cement and / or sand and can be
applied by notch trowel.
Features
}} Improves adhesion
}} High open time & antisag properties
}} Good adjustability time with high water retention even at elevated temperature
Tile Bonder
}} It can be used with both grey and white cement
}} Suitable for Ceramic & Vitrified tiles
Benefits
Exceptional bonding properties, compaired to the traditional conventional machhan
T22
}}
Method of Application
Surface
}} he surface should be sound, clean, and free from dirt, oil or grease before application of conventional
T
cement machan or levelling bed.
}} Ideally levelling bed / Machan should be prepared using Cement : Sand : Water in the ratio of 1 : 6 : 1.
Joints Preparation
}} xpansion joints coinciding with joints in the substrate should be incorporated at the design stage with
E
spacing at 5 mtrs maximum and it is not to be covered with tiles.
Mixing
}} Roff Tile Bonder to be mixed with cement & sand for your tile fixing.
CCRFTFTB115A
T22 Tile Bonder
A) With cement
a) T
ake 10 ltrs of water in a clean and dry vessel. Slowly, mix 50 Kg Cement and 1 Kg of Roff Tile bonder
under stirring to obtain a uniform lump free consistency. A forced action mixer attached with paddle stirrer
for 2 - 3 minutes) is highly recommended. Finally, add 5 Ltrs. Of Water to get a soft and smooth pastes.
Water dosage can be decreased / increased depending upon cement and sand available at site to achieve
the desired consistency for application
or hand-mixing, the total quanity of the mixture should be reduced to enough to ensure a soft and smooth,
F
lump-free paste.
b) Mix the quantity, which can be used within 30 minutes.
Tile Bonder
B) With cement & Sand
T22
}} Water : 15 Ltrs.
a) T
ake 10 ltrs of water in a clean and dry vessel. Slowly, mix 25 Kg Cement , 25 Kg River Sand (0.1 0.5 mm )
and 1 Kg of Roff Tile bonder under stirring to obtain a uniform lump free consistency. A forced action mixer
attached with paddle stirrer for 2 3 minutes) is highly recommended. Finally, add 5 Ltrs. Of Water to get a soft
and smooth pastes. Water dosage can be decreased / increased depending upon cement and sand available
at site to achieve the desired consistency for application
or hand-mixing, the total quanity of the mixture should be reduced to enough to ensure a soft and smooth ,
F
lump-free paste.
b) Mix the quantity, which can be used within 30 minutes.
Coverage
Around 2 Sq.ft / 1 kg cement additive mix depending on cement machan conditions.
A) With cement
a) T
ake 10 ltrs of water in a clean and dry vessel. Slowly, mix 50 Kg Cement and 1 Kg of Roff Tile bonder under
stirring to obtain a uniform lump free consistency. A forced action mixer attached with paddle stirrer for
2 - 3 minutes) is highly recommended. Finally, add 5 Ltrs. Of Water to get a soft and smooth pastes.
Water dosage can be decreased / increased depending upon cement and sand available at site to achieve
the desired consistency for application.
or hand-mixing, the total quantity of the mixture should be reduced to enough to ensure a soft and smooth,
F
lump-free paste.
Tile Bonder
b) Mix the quantity, which can be used within 30 minutes.
T22
}} Roff Tile Bonder : 1 Kg (approx. Volume 1.3 Ltrs.)
}} Water : 15 Ltrs. (approx)
A) T
ake 10 ltrs of water in a clean and dry vessel. Slowly, mix 25 Kg Cement, 25 Kg River Sand (0.1 0.5 mm )
and 1 Kg of Roff Tile bonder under stirring to obtain a uniform lump free consistency. A forced action mixer
attached with paddle stirrer for 2 3 minutes) is highly recommended. Finally, add 5 Ltrs. Of Water to get a soft
and smooth pastes. Water dosage can be decreased / increased depending upon cement and sand available at
site to achieve the desired consistency for application.
or hand-mixing, the total quantity of the mixture should be reduced to enough to ensure a soft and smooth ,
F
lump-free paste.
B) Mix the quantity, which can be used within 30 minutes.
Vertical Area
1% RTB Powder 1% RTB Powder 2% RTB Powder 2 % RTB Powder
Sr. No. Property Control Cement (Cement +Sand ) Cement (Cement +Sand )
Open Time
1 0 5 5 10 15
(minutes)
Adjustability
2 0 5 5 10 10
(minutes)
Pull-Off Adhesion
3
(N/mm2)
48 hrs (N/mm2) 0.48 0.8 1.4 0.6 0.5
28 Days (N/mm ) 2
1.2 1.5 2.8 1.5 1.2
Watch Points
}} Intermittently touch the adhesive paste on substrate by finger if the adhesive sticks to fingers then continue
fixing and if not scrape off the adhesive and apply newly mixed adhesive.
Technical Information
Colour : White
Appearance : Free flowing powder
Bulk density : 0.75 g/ ml
Tile Bonder
Coverage
}} 2.0 - 2.5 sq. ft./ 1 kg (Mix of Cement : Sand : Roff Tile Bonder : Water) at 3 mm thickness
}} 1.0 - 1.2 sq. ft /1 kg (Mix of Cement : Sand : Roff Tile Bonder : Water) at 6 mm thickness
}} Coverage would depend upon porosity of substrate.
T22
Packaging
1 kg
Shelf Life
Factory sealed pack of this product are guaranteed to be best quality for one year* from the date of
manufacturing, if stored off the ground in a dry area.
*
High humidity will reduce the shelf life of the bagged product
Pidilite Industries Limited DISCLAIMER The product information & application details given by the
company & its agents has been provided in good faith & meant to serve
Construction Chemicals Division
only as a general guideline during usage. Users are advised to carry
Ramkrishna Mandir Road out tests & take trials to ensure on the suitability of products meeting
Post Box No. 17411 their requirement prior to full scale usage of our products. Since the
correct identification of the problems, quality of other materials used
Andheri (E) Mumbai 400059 INDIA
and the on-site workmanship are factors beyond our control, there are
Tel +91-22-2835 7000 Fax +91-22-2835 7008 no expressed or implied guarantee / warranty as to the results obtained.
website : www.roff.in E-mail : roff@pidilite.co.in The company does not assume any liability or consequential damage for
Toll Free No.: 1800-209-5504 unsatisfactory results, arising from the use of our products.