Professional Documents
Culture Documents
Products Custom Products Cross Reference Design Consulting Application Notes Quote Request/Tech Support About Us
Product Search Home Products Custom Designed and Engineered Power Inductor Products Helical Wound Featured
Please Use Browser Search Tool On Inductors High Power Inductor E Series. Unpotted.
Listings
Search
High Power Inductor E Series. Unpotted. E70340-013
High Power Inductor E Series.
Unpotted.
Shipping & Returns $36.75
Privacy Notice
Conditions of Use
Contact Us The CWS' ES, EK and E73040 Series of High Power Inductor and High Current Inductor are designed
Site Map using Helical Winding (Helix Coil) in semi quasi planar structure to achieve lower DC resistance (DCR), lower AC E70340-014
Soldering CWS Components resistance (skin effect loss), and high inductance. The core materials used are Distributed Air Gaps Compacted High Power Inductor E Series.
Terms and Conditions Cores from Magnetics, CSC and Micrometal. Both Gapped and UnGapped cores are used to extend the DC Unpotted.
bias capability. $37.02
Categories
Products These are unpotted inductors. For potted/encupsulated versions, please see our EES- and EEK-Series.
|Custom Designed and
Engineered Power Inductor The E Series High Power Inductor and High Current Inductors are capable of handling high DC bias current, high
Products energy storage and high voltage swing due to higher mass and higher saturation flux densities of the cores used.
|Helical Wound Various Mounting configuration with pre-tinned leads for direct connection. Mounting Spacers ( PN: EKES-
Inductors
|High Power Inductor E SP001) can be bonded or placed under the cores to rest the inductor flat into the PCB during manufacturing, if
Series. Unpotted. needed.
|High Current
Encapsulated Inductors:
EES and EEK Series. Potted. The table below shows the types of cores used in each of the part number. The ES Series and the E70340
|Ferrite Based Inductors Series are using Sendust or KoolMu core type and is suitable for swinging chokes, energy storage filter inductor
|HF and MPP Based in SMPS with high ripple current, in-line noise filters with large AC voltage swing, unidirectional drive application
Surface Mount Inductors such as pulse transformer and flyback transformer. The E70340-0013 and E70340-004 are using Gapped iron
|Toroid Inductors powder core and and used in similar application where lower cost is needed. Sendust or KoolMu has good
|Surface Mount frequency response up to 1 Mhz, lower core losses, and will operate at a lower temperature.
Inductors
|Leaded Inductors
|Audio Choke Amorphous The EK Series are for those application requiring small inductance drop when a high DC current (DC bias) is
Core flowing into the inductor. The EK series are built using Mega Flux cores with higher saturation flux density. The EK
|Very High Current Power Mega Flux version is suitable for Output Ripple filtering, High Power Output Chokes and High Current Inductor
Inductor 450 Amperes Rating where a good DC bias characteristics is desired. The core loss of the Sendust/Koolmu and Mega Flux are very
Shoebox Series similiar at frequency below 300 Khz. Mega Flux version cost a little more than the others. Mega Flux cores are not
|Ferrite and Nanocrystalline suitable for application over 750 Khz, and has a much higher core loss than the Koolmu/Sendust cores.
Common Mode Choke
|Top Rate High Frequency
Transformer Products The part PDF drawing has the DC Bias Current versus Inductance table. It is not necessary that Inductors with
|Current Sense higher Inductance versus DC Bias Current is better in all cases. This is because Energy Storage in a filter is
Transformers and SMPS
|Power Transformers defined as 1/2 x [L] x [Sq I], where [L] is the inductance and [Sq I] is the square of the current flowing into the
|Other Configuration Inductor. For energy storage filtering application, having a good DC bias is not always a desired feature. When
Inductors the current flow into the inductor increases, the amount of energy stored increased to the square of the current [Sq
|EMI Devices I], and if the inductance [L] does not drop when the current increase, the energy stored maybe too high and could
|Single and 3-Phase 50/60 potentially cause a circuit to blow up. For such energy storage filtering application such as Input Filter ( Phi or
Hz, Dry and Oil-Filled butterworth or chebyshev filters), or the Boost Inductor, the ES Series using Koolmu or Sendust is usually the
Transformers desired choice. However, every application is different and the design engineer must balance the trade offs.
|Power Line Reactor Coil
|Audio Visual Products
|HVAC Systems Fan
Controllers/Energy Saving APPLICATION:
Devices
|GSA Product Specs Industrial High Current Filter Inductors, Switching Regulator Inductor, In-Line Noise
Custom Products Filters, Pulse Transformer, Fly Back Transformer, Differential Mode Choke, Boost Power
Cross Reference Factor Correction Choke and Welding Machine Output Inductor.
Design Consulting
Application Notes Inductance range from 10 uH to 200 uH, Current Rating from 10 Amps to 250 Amps.
Quote Request/Tech Support Designed with High Flux, Kool Mu, Sendust or Iron Powder E-Cores.
About Us Custom design available. Please email or call us.
FEATURES:
Can achieve up to 60% more energy storage than wire wound
Inductors
Use of Flat Helical winding to reduce DCR, lower copper loss,
reduce size, even out heat dissipation and achieve up to 80%
of copper fill factor
Helix coils are self supported with no bobbins or coil forms
Designed using High Flux, MFlux, KoolMu Sendust cores for
extreme high temperature operations of 200 deg C
Designed using gapped and un-gapped Micrometal's 40, 52 and
8/90 mix Iron Powder Cores for high saturation flux and lower
cost.
Designed for commercial, industrial and military application
Operating temperature range: -55 deg C to +200 deg C
Inductance values : 1 uH to 80 uH
Current rating : Up to 250 Amps
Low Cost mass producible design
Background on Helical Winding Output Inductors.
converted by W eb2PDFConvert.com
Notes:
1)The prices shown below are for sample or prototyping low quantity. Please call 800-377-3244 or
email sales@coilws.com for larger volume OEM pricing.
2) Our large OEM pricing is extremely competitive. We will meet or beat any competitors prices with better
deliveries
3) Custom designs are available to meet any of your requirements. Please contact us
4) The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.
5) Rated Current is based on a 60 deg C temperature rise at an ambient temperature of 40 deg C. High Flux,
KoolMu, Sendust versions can operate to over 200 deg C. Iron Powder cores may exhibit thermal aging which
limits the operating tempertaure to 100 deg C.
6) Helical wire used on High Flux, KoolMu, Sendust and Iron Powder versions has Kapton insulation and can
withstand a temperature of 220 deg C.
Home
Disclaimer: Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, CWS) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure
relating to any product. CWS reserves the right at any time and fromtime to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product
or service available throughout this website on temporary or permanently basis without notice. CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by
prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS fromany damages arising or resulting fromsuch
use or sale.
converted by W eb2PDFConvert.com