Professional Documents
Culture Documents
FACULTAD DE INGENIERA
Resumen
Palabras claves
Resistencia, fuente DC regulada, mtodo de los mnimos cuadrados, corriente, tensin y constante de
proporcionalidad.
Abstract
The present work was carried out experimentally, through the construction of a circuit involving a
resistance and a DC regulated supply, measuring the current applied to a resistance value of 100 , to see
if these variables were either not directly proportional. First, the circuit is made, the source is turned on
and then varying the values of the voltage applied to that circuit. Then, the measurement of the electrical
current passing through the circuit when the voltage varied was performed. Finally, the proportionality
constant is calculated, which in theory should be equal to the value of resistance given. Theoretical
calculations and graphics were performed to obtain the value of the slope and relate the value of the slope.
Finally, this was calculated by the least squares fit.
Keywords
Resistance, DC regulated supply, method of least squares, current, voltage and constant of proportionality.
1
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BSICAS
REA DE LABORATORIO DE FSICA
FACULTAD DE INGENIERA
2
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BSICAS
REA DE LABORATORIO DE FSICA
FACULTAD DE INGENIERA
0,0717
1,05 105 5 7,175
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BSICAS
REA DE LABORATORIO DE FSICA
FACULTAD DE INGENIERA
(0,07175
1,05 )( ) (
105 m = 7,175
20 b 105 )
V (V)
Obtengo las dos ecuaciones:
12
0,07175 m+ 1,05b=7,175(1)
10 1,05 m+20 b=105(2)
8
V (V) Aplico, solucin de sistemas 2x2, utilizando
Mtodo de Igualacin.
6
Despejo m, en ambas ecuaciones (1) y (2)
4
7,1751,05 b
m= (3)
2 0,07175
10520 b
0
m= ( 4)
1,05
0 0.05 0.1 0.15
1. Graduamos el multmetro en el ampermetro
para que as podamos saber cul es la corriente
que deja fluir un circuito con una resistencia de
100 incorporada en este. Ubicamos los Ahora, igualo ambas expresiones:
caimanes en la fuente DC, En los bornes
positiva y negativa respectivamente. 7,1751,05 b 10520 b
=
0,07175 1,05
2. Con la segunda boca de los caimanes que est
agarrando al borne positiva de la fuente DC se Realizo los respectivos despejes, para obtener
toma la resistencia por uno de sus extremos. Y el valor de m:
con la ayuda de otros caimanes sosteniendo el
otro extremo de la resistencia es ubicado a la 1,05 (7,1751,05 b )=0,07175(10520 b)
terminal de carga positiva del multmetro, as 7,533751,1025 b=7,533751,435 b
como se puede apreciar en la imagen nmero 2.
7,533757,53375=1,1025 b1,435 b
3. Utilizando otros caimanes pero esta vez 0=0,3325 b
sosteniendo la fuente DC por el borne negativo. b=0
Y con el otro extremo del caimn que sostiene la
terminal negativa del multmetro, podremos Sabiendo que b = 0, reemplazo este valor
saber cul es la resistencia que se est ahora, en la ecuacin nmero 4, para de esta
generando en ese circuito de corriente DC, forma, hallar el valor de m:
regulando la fuente en diferentes voltajes desde
0,5 V - 10 V.
10520(0)
m=
Calculo de m, en este caso del valor de la 1,05
resistencia a travs del mtodo de los
mnimos cuadrados. En la Tabla 2. Se pueden 105
apreciar, los valores obtenidos al realizar este
m=
1,05
procedimiento.
4
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BSICAS
REA DE LABORATORIO DE FSICA
FACULTAD DE INGENIERA
V =R I y V =m I + b
5
4.