Professional Documents
Culture Documents
Management
ZTE University
Objectives
eNodeB
configuration
Start
N
LTE sub-network available? Create LTE sub-network
Y
Create base station
End
On the Create MO
SDR NE Agent
interface, input the
related information of
the OMM server, and
click OK.
In the Configuration
In the Managed Element
Management window, expand
tree, double-click Operator.
the NE and select Modify Area.
1. In the managed
element tree, double-
click Device.
2. On the Physical
View sub-tab of the
Rack Graph tab, right-
click the slot in which a
board is to be created
and select Add Board.
Notes: Based on BBU board planning,
repeat step 2 and step 3 to create the SA,
BPL or BPL1, and PM boards.
ZTE Corporation. All rights reserved
Creating an RRU
1. In the managed-
2. On the Physical View
element tree, double-
tab, click .
click Device.
Example
17(PM1)
11(BPL4)
10(BPL3)
The board is created in 16(PM2) 18(FA)
9(BPL2)
this sequence: PM > CC > 8(BPL1)
13(SA) 1 (CC1)
SA > SE > FA > UCI > BPL.
After determining the actual configuration of BBU, you need to
configure the related boards in the corresponding slots. In this example,
the boards are created in this sequence of PM*2 > SA > FA > BPL*4.
After the LTE (BPL) board is created successfully, the system
automatically creates optical ports.
[BPL-OF2-RRU3-CELL3][BPL-OF1-RRU2-CELL2][BPL-OF0-RRU1-CELL1]
IP Transmission Configuration
Bandwidth Configuration
In the managed-element tree, select Transmission Network > LTE TDD >
Signaling and Business and double-click Service and DSCP Mapping.
Configuring a Serving
Configuring the S1AP
Cell