SDC-Series
13.8VDC Switching Mode DC-DC Converter
SDC - 200 Series
Description Features
‘This series of switching mode DC-DC reducer-converter are a 13.8V DC regulated output voltage
built with @ heavy anodized aluminum heat sink housing. The gw _22-30V DC input voltage
‘switching mode conversion technology results high efficiency, High efficiency 88%
less heat, and a good low ine and load regulations. = High power density
8 Output over voltage protection
‘The on-off power switch saves battery power without manual
8 Overload and short circuit protection
sisconnection input hard wiing when the car is switched of
a ° LED power on indicator
‘The SOC-225 & 246 have additonal auxliary output for low a EMC INTERFERENCE IMMUNITY
power equipment as well 8 Power on-off switch
Specifications
Models S00 - 225
Tnput Voltage Ran 22 - s0VvDC
‘Output Voltags
Continuous Output Current
208,
Maximum Output Gurrent
2A,
Ripple & Noise (cma)
“20min
Load Regulation (0-100% load) SOmV
Ling Regulation (20-30V variation) 20mv
Efficiency aT%
Tnput Connection Ty Cable
‘utput Connection Type Terminal
Tadicatore LED Power
Cooling System Natural Convection
Protection Devices ‘Overioad, Short Creuit,
Taput Fuse Type ‘Standard Car Blade Fuse
GE Approvals EN 55018 EN 55022
‘e-Mark Approvals ett 02 1528
Dimensions (WxHxD)
T56XSTAIG8 mon
6.112.246 inch
Weight
akg 31 bs
‘Accessory
re An
‘Mounting Bracket
1 Allvalues ate based on he Standard ambient Temperature 25°C and Pressure 0.1Mpa
>ECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE