Professional Documents
Culture Documents
+VS
1000F
15K 1F
MUTE/
ST-BY 3
5
IN (L) 7
+ 4 OUT (L)
1F -
18K 4.7
RL (L)
8 IN- (L)
100nF
15K 18K
GND 9 560
+5V P
10 IN- (R) 560
18K
1F - 2 OUT (R)
IN (R) 11
+
4.7
1 6 RL (R)
-VS 100nF
1000F
D94AU085
11 IN+(1)
10 IN-(1)
9 GND
8 IN-(2)
7 IN+(2)
6 -VS
5 MUTE
4 OUTPUT(2)
3 +VS
2 OUTPUT(1)
1 -VS
THERMAL DATA
Symbol Description Value Unit
Rth j-case Thermal Resistance Junction-case Max 2.8 C/W
+VS
D1 5.1V
R1 C1 R3 C5 C6
10K 1F 15K 1000F 0.1F
MUTE/ST-BY 3
5
PLAY
5V Q1 IN (L) 7 C9 470F
BSX33 + 4 OUT (L)
0 C3 1F -
MUTE R2 R4 R8 OUT
15K 30K 4.7 (L)
8 IN- (L)
C7
9 0.1F
C2 R5
100F C4 1F 1K
IN (R) 11 + C10 470F
2 IN- (R)
-
R6 R9 OUT
30K 4.7 (R)
10 OUT (R)
C8
1 0.1F
6 R7
1K
GND
D96AU444
2/7
TDA7269
3/7
TDA7269
MUTE STAND-BY FUNCTION - when Vpin5 is between +VS - 2.5V and +VS
- 6V the final stage current generators are
The pin 5 (MUTE/STAND-BY) controls the ampli- switched on and the amplifier is in mute
fier status by two different thresholds, referred to mode
+VS. - when Vpin5 is lower than +VS - 6V the am-
- When Vpin5 higher than = +VS - 2.5V the plifier is play mode.
amplifier is in Stand-by mode and the final
stage generators are off
Figure 2
+VS
(V)
20
-VS
-20
VIN
(mV)
Vpin5
(V)
VS
VS-2.5
VS-6
VS-10
Iq
(mA)
VOUT
(V)
STDBY STDBY
4/7
TDA7269
+VS
C4 C5
R2 C3 +VS
MUTE/
ST-BY 3
5
R1 IN (L) 7
+ 4 OUT (L)
SW1 C1 -
DZ R5 R7
RL (L)
8 IN- (L)
C8
R4 R3
GND 9 R6
R8
C2 - 2 OUT (R)
IN (R) 11
+
R10
1 6 RL (R)
-VS C9
C7 C6
D94AU087
APPLICATIONS SUGGESTION nents are those shown are the demo board sche-
(Demo Board Schematic) matic different values can be used: the following
table can help the designer.
The recommended values of the external compo-
RECOMMENDED LARGER THAN SMALLER THAN
COMPONENTS PURPOSE
VALUE RECOMMENDED VALUE RECOMMENDED VALUE
Increase of Dz
R1 10K Mute Circuit
Biasing Current
R2 15K Mute Circuit Vpin # 5 Shifted Downward Vpin # 5 Shifted Upward
R3 18K Mute Circuit Vpin # 5 Shifted Upward Vpin # 5 Shifted Downward
R4 15K Mute Circuit Vpin # 5 Shifted Upward Vpin # 5 Shifted Downward
R5, R8 18K Closed Loop Gain Increase of Gain
R6, R9 560 Setting (*) Decrease of Gain
R7, R10 4.7 Frequency Stability Danger of Oscillations Danger of Oscillations
Input DC Higher Low Frequency
C1, C2 1F
Decoupling Cutoff
St-By/Mute Time
C3 1F Larger On/Off Time Smaller On/Off Time
Constant
Supply Voltage
C4, C6 1000F Danger of Oscillations
Bypass
Supply Voltage
C5, C7 0.1F Danger of Oscillations
Bypass
C8, C9 0.1F Frequency Stability
Dz 5.1V Mute Circuit
(*) Closed loop gain has to be => 25dB
5/7
TDA7269
6/7
TDA7269
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
1998 STMicroelectronics Printed in Italy All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands -
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
7/7