Professional Documents
Culture Documents
Description
The C-2 Setting Tool is designed to run and
set a liner. A set of spring loaded dogs can be add-
ed to the standard tool so that liners equipped with
weight set liner packers can also be run and set.
The Bottom Connection of the C-2 setting tool
has an 8 Round connection to allow any of the four
types of cementing packoff assemblies to be uti-
lized. A splined floating nut with external left hand
acme threads is made up in the liner setting sleeve
or liner packer and carries the liner assembly into
the hole. A ball bearing assembly above the float-
ing nut supports the weight of the run in string while
the setting tool is being released with right hand ro-
tation from the liner setting sleeve or liner packer.
Features / Benefits
Used to run left-hand set and hydraulic set
hangers
Ball bearing race/floating nut system ensures
positive release from liner top
Drill pipe thread at top
Accepts all types of cementing packoff
assemblies
Optional packer setting dogs incorporated in
main body
Full strength mandrel to carry long, heavy
liners to depth
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in
conjunction with equipment or product. 9/6/00 Baker Hughes Incorporated.
Unit No. 4365 10-1-03 C-2 Setting Tool
Rev. New Page 2 of 9
SIZE TORQUE stall and tighten Set Screws (10). Stand the
3.500 4,000 - 5,000 ft/lb Body (12) on a suitable work surface with end
4.000 4,000 - 5,000 ft/lb with two threads up. Load the Lower Bearing
4.500 4,000 - 5,000 ft/lb Race (19) on the Body (12) and slide it down to
5.000 4,000 - 5,000 ft/lb the shoulder.
5.500 5,000 - 7,000 ft/lb 6. At this point a C-2 Setting Tool may be as-
6.625 8,000 - 12,000 ft/lb sembled with or without packer setting dogs.
7.000 8,000 - 12,000 ft/lb a. If assembling a C-2 Setting Tool without
7.625 8,000 - 12,000 ft/lb Packer Setting Dogs follow this procedure:
8.625 8,000 - 12,000 ft/lb
9.625 8,000 - 12,000 ft/lb 1. Slide Spacer (17) onto Body (12) until it
shoulders on the Upper Race (18).
1. Place Upper Stem (4) in a vise. Lubricate the
Threads on both ends of the Upper Stem with 2. Take the entire Body Assembly (10, (11),
B.G. HCF lubricant or equivalent. Install the O- (12), (17), (18) & (19) and make it up with
Rings (2) on both ends of the Upper Stem. Lu- Slip Support (16).
bricate these O-Rings (2) with Molykote 55m b. If building a C-2 Setting Tool with Packer
Dow Corning or equivalent. Setting Dogs follow this procedure.
2. Make-up Top Connection (1) with Upper Stem 1. Take Packer Setting Dogs (17) and insert
(4) and torque to the recommended value (See the appropriate number of Coil Springs
Size/Torque Chart above) for the size being as- (20). A liberal amount of B.G. HCF
sembled. Install Set Screw (3) in the Top Con- grease or equivalent will hold these
nection (1) and tighten. springs in place while further assembly is
3. Slide Cap (6) onto Upper Stem (4). Install the taking place.
Set Screws in Cap (6). Do not tighten these set
2. If at this point if a 6-5/8 or larger tool is be-
screws at this time. When the setting tool is
ing assembled, slide the Spacer (21) onto
made up to a setting sleeve or weight set liner
the Body (12) until it stops at the Upper
packer the Cap (6) will need to be brought down
Race (18).
on top of the sleeve and the Set Screws (5)
tightened at that time. NOTE: The Spacer (21) is only used on the 6-5/8
and larger sizes of setting tools.
4. Make-up the Slip Support (16) with the Upper
Stem (4) and torque to the recommended value 3. Place the Packer Setting Dogs (17) and
for the size being assembled. Install the Set the Coil Spring (20) onto the Body Bear-
Screws (7) in the Slip Support (16) and tighten. ing Assembly (8), (10), (11), (12), (18) &
5. Lubricate all three Threads on the Body (12) (19) and make it up with the Slip Support
with B.G. HCF lubricant or equivalent. Install (16).
the O-Rings (8) on both ends of the Body (12). 7. Slide Floating Nut (13) onto Body (12).
Install the Ball Bearings (11) on Lower Race 8. Make-up Bottom Connection (15) with Body
(19). These bearings should be well lubricated (12) and Torque to the recommended value for
with B.G. HCF grease or equivalent. Thread the the size being assembled. Install the Set
Upper Race (18) past the first thread on the Screws (9 & 14) and tighten. The Threads on
Body (12) and make it up onto the middle both ends of the Body (12) will be torqued to the
thread. When the upper race contacts the ball same torque value.
bearings, back it up 1/4 turn to the left, then in-
Unit No. 4365 10-1-03 C-2 Setting Tool
Rev. New Page 4 of 9
Specifications Specifications
C-2 Setting Tool with Setting Dogs C-2 Setting Tool without Setting Dogs
Liner Sleeve Sleeve Sleeve Float Upper Commodity Liner Sleeve Sleeve Sleeve Float Upper Commodity
Size OD ID Length Nut OD Stem OD No. Size OD ID Length Nut OD Stem OD No.
3.500 4.375 3.625 6 Ft. 3.225 2.875 265-21-0048 3.500 4.375 3.625 6 Ft. 3.225 2.875 265-21-0116
4.000 4.375 4.000 6 Ft. 3.705 2.875 265-21-0065 4.000 4.375 4.000 6 Ft. 3.705 2.875 265-21-0117
4.500 5.500 5.000 6 Ft. 4.251 3.500 265-21-0064 4.500 5.500 5.000 6 Ft. 4.251 3.500 265-21-0118
4.500 5.500 5.000 10 Ft. 4.251 3.500 265-21-0119 4.500 5.500 5.000 10 Ft. 4.251 3.500 265-21-0120
5.000 5.750 5.250 6 Ft. 4.646 3.500 265-21-0072 5.000 5.750 5.250 6 Ft. 4.646 3.500 265-21-0045
5.000 5.750 5.250 10 Ft. 4.646 3.500 265-21-0121 5.000 5.750 5.250 10 Ft. 4.646 3.500 265-21-0122
5.500 6.250 5.750 6 Ft. 5.235 3.500 265-21-0123 5.500 6.250 5.750 6 Ft. 5.235 3.500 265-21-0002
5.500 6.250 5.750 10 Ft. 5.235 3.500 265-21-0125 5.500 6.250 5.750 10 Ft. 5.235 3.500 265-21-0124
6.625 7.250 6.750 6 Ft. 6.166 4.500 265-21-0127 6.625 7.250 6.750 6 Ft. 6.166 4.500 265-21-0126
6.625 7.250 6.750 10 Ft. 6.166 4.500 265-21-0129 6.625 7.250 6.750 10 Ft. 6.166 4.500 265-21-0128
7.000 8.250 7.500 6 Ft. 6.516 4.500 265-21-0062 7.000 8.250 7.500 6 Ft. 6.516 4.500 265-21-0052
7.000 8.250 7.500 10 Ft. 6.516 4.500 265-21-0131 7.000 8.250 7.500 10 Ft. 6.516 4.500 265-21-0130
7.000 8.250 7.500 6 Ft. 6.516 5.000 265-21-0068 7.000 8.250 7.500 6 Ft. 6.516 5.000 265-21-0132
7.000 8.250 7.500 10 Ft. 6.516 5.000 265-21-0134 7.000 8.250 7.500 10 Ft. 6.516 5.000 265-21-0133
7.625 8.750 7.750 6 Ft. 7.250 4.500 265-21-0135 7.625 8.250 7.750 6 Ft. 7.250 4.500 265-21-0067
7.625 8.750 7.750 10 Ft. 7.250 4.500 265-21-0137 7.625 8.250 7.750 10 Ft. 7.250 4.500 265-21-0136
7.625 8.750 7.750 6 Ft. 7.250 5.000 265-21-0138 7.625 8.250 7.750 6 Ft. 7.250 5.000 265-21-0073
7.625 8.750 7.750 10 Ft. 7.250 5.000 265-21-0140 7.625 8.250 7.750 10 Ft. 7.250 5.000 265-21-0139
8.625 9.250 8.750 6 Ft. 8.253 4.500 265-21-0142 8.625 9.250 8.750 6 Ft. 8.253 4.500 265-21-0141
8.625 9.250 8.750 10 Ft. 8.253 4.500 265-21-0144 8.625 9.250 8.750 10 Ft. 8.253 4.500 265-21-0143
9.625 10.250 9.750 6 Ft. 9.240 4.500 265-21-0146 9.625 10.250 9.750 6 Ft. 9.240 4.500 265-21-0145
9.625 10.250 9.750 10 Ft. 9.240 4.500 265-21-0148 9.625 10.250 9.750 10 Ft. 9.240 4.500 265-21-0147
9.625 10.250 9.750 6 Ft. 9.240 5.000 265-21-0150 9.625 10.250 9.750 6 Ft. 9.240 5.000 265-21-0149
9.625 10.250 9.750 10 Ft. 9.240 5.000 265-21-0152 9.625 10.250 9.750 10 Ft. 9.240 5.000 265-21-0151
9.625 11.750 10.625 6 Ft. 9.240 5.000 265-21-0154 9.625 11.750 10.625 6 Ft. 9.240 5.000 265-21-0153
9.625 11.750 10.625 10 Ft. 9.240 5.000 265-21-0156 9.625 11.750 10.625 10 Ft. 9.240 5.000 265-21-0155
C-2 Setting Tool Unit No. 4365 10-1-03
Rev. New Page 5 of 9
Rev. New
Unit No. 4365
Assembly and Dimensional Data Drawing No. 784-189
Page 6 of 9
10-1-03
Parts List
Size 3.500, 4.000, 4.500, 5.00 & 6.625
Refer to Drawing No. 784-189
Item No. 3.500 4.000 4.500 5.000 5.500 6.625
Description
No. Reqd 265-21-0116 265-21-0117 265-21-0118 265-21-020 265-21-0045 265-21-0122 265-21-0002 265-21-0124 265-21-0126 265-21-0128
1 Top Connection 1 09-03764-40 09-12131-30 09-02821-50 09-02821-50 09-09350-30 09-05921-20
2 O-Ring 2 WW-B228-H40 WW-B335-H40 WW-B336-H40 WW-B336-H40 WW-B336-H40 WW-B344-H40
3 Set Screw 2 WW-G518-050 WW-G51D-0M0 WW-G51D-050
4 Upper Stem 1 09-03764-30 09-02708-60 09-02821-70 09-09622-20 09-02821-70 09-09622-20 09-02992-00 09-09622-10 09-05921-40 09-20154-60
5 Set Screw 2 WW-G51D-060 WW-G51D-0B0 WW-G51D-0S0 WX-1704-400 WW-G51D-0H0
6 Cap 1 09-03764-20 09-02690-40 09-03870-00 09-02821-80 09-08951-90 09-0575-60
7 Set Screw 2 WW-G518-0F0 WW-G51D-0F0 WW-G51D-0H0 WW-G51D-050 WW-G51D-0H0 WW-G51D-140
See WW-B226-H40 WW-B226-H40 WW-B228-H40 WW-B333-H40 WW-B336-H40 VW-B344-H40
8 O-Ring
Rev. New
Unit No. 4365
9 Set Screw 2 WX-2970-300 WW-G51D-0W0
10 Set Screw 2 WX-2970-300 WW-G51D-0D0
11 Ball Bearing See Size WX-2156-300 (35 req) WX-4258-800 (46req)
12 Body 1 09-02939-50 09-03887-00
13 Float Nut 1 09-03427-10 09-03896-90
14 Set Screw 2 WX-2970-300 WW-G51D-0W0
15 Bottom Connection 1 09-12077-20 09-20430-950
16 Slip Support 1 09-02048-00 09-03880-30 09-03899-40
Page 7 of 9
17 Spacer 1 09-03353-20 09-03955-00
18 Upper Race 1 09-02841-20 09-21623-50
10-1-03
19 Lower Race 1 09-21606-20 09-21606-40 09-21579-10
C-2 Liner Setting Tool with Packer Setting Dogs
Rev. New
Unit No. 4365
Assembly and Dimensional Data Drawing No. 784-188
Page 8 of 9
10-1-03
Parts List
Size 3.500, 4.000, 4.500, 5.500 with Packer Setting Dogs
Refer to Drawing No. 784-188.
Item No. 3.500 4.000 4.500 5.000 4.000 5.500
Description
No. Reqd 265-21-0048 265-210-0065 265-21-0064 265-21-0119 265-21-0072 265-21-0121 265-21-0123 265-21-0125
Top
1 1 09-03764-40 09-12131-30 09-02821-50 09-02821-50 09-09350-30
Connection
2 O-Ring 2 WW-B228-H40 WW-B335-H40 WW-B336-H40 WW-B336-H40 WW-B336-H40
3 Set Screw 2 WW-G518-0S0 WW-G51D-0M0 WW-G51D-0M0 WW-G51D-0M0 WW-G51D-0M0
4 Upper Stem 1 09-03764-30 09-02708-60 09-02821-70 09-09622-20 09-02821-70 09-09622-20 09-02992-00 09-09622-10
5 Set Screw 2 WW-G51D-060 WW-G51D-0B0 WW-G51D-0F0 WW-G51D-0F0 WW-G51D-0H0
6 Cap 1 09-03764-20 09-02690-40 09-03870-00 09-02821-80 09-08951-90
7 Set Screw 2 WW-G518-0F0 WW-G51D-0F0 WW-G51D-0H0 WW-G51D-0S0 WW-G51D-0H0
8 O-Ring See Size WX-B226-H40 (1 req) WW-B226-H40 (2 req) WW-B228-H40 (2 req) WW-B333-H40 (2req) WW-B336-H40 (2req)
9 Set Screw 2 WW-G518-0M0 WW-G51D-0M0
Rev. New
Unit No. 4365
8 O-Ring 2 WW-B427-H40 WW-B425-H40
9 Set Screw 2 WW-G51D-0W0
WW-G51D-0S0
10 Set Screw 2 WW-G51D-0D0
11 Ball Bearing See Size WX-2156-300 (35 req) WX-4258-800 (46 req)
12 Body 1 09-02939-50 09-03887-00
13 Float Nut 1 09-03427-10 09-03896-90
14 Set Screw 2 WW-G510-0S0 WW-G51D-0W0
15 Bottom Connection 1 09-12077-20 09-20430-20
Page 9 of 9
16 Slip Support 1 09-02048-00 09-03880-30 09-03899-40
10-1-03
17 Dogs See Size 07-80095-07 (5 req) 07-80095-08 (1req)
18 Upper Race 1 09-02841-20 09-21623-50
19 Lower Race 1 09-21606-20 09-21606-40 09-21579-10
20 Coil Spring See Size WX-1896-300 (10 req) WX-1896-300 (10 req)
21 Spacer 1 09-06648-00 09-06648-00